fasis WTP DIN rail terminal blocks with push-in connection

Similar documents
selos Wieland jumpering system Perfect technology Copper Steel Wieland marking system Reliable identification Perfect technology Extremely rugged!

fasis The Wieland Terminal. fasis WKFN DIN Rail Terminal Blocks with Tension Spring Connection Safe with Spring.

Datasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data

8WH2 Spring-Loaded Terminals

XB IEC Terminal Blocks. Screw Type Insulation Displacement Connection Type

8WH2 Spring-Loaded Terminals

DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD

CONTA-CONNECT. Double-level terminal blocks ZRKD 2,5 Double-level protective earth terminal ZSLD 2,5

Application Coding Cable diameter Color Part No. Std. Pack Part No. Std. Pack. Female connector. gray black gray black gray black green

8WH6 ipo Plug-In Terminals

OUR POWER TEAM. High-Current DIN-Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) vibration-proof fast maintenance-free

Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / in

8WH6 ipo Installation Terminals

Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil)

Rated voltage (V) Current (A) Stranded wire. Solid wire A.D.O. (AWG)

ST-COMBI 4 mm 2 Pluggable Spring-Cage Terminal Blocks

IEC TERMINAL BLOCKS. Screw Clamp Connection. Feed Through DIN Rail 433. Ground DIN Rail 439. Fuse Holder DIN Rail 445. Disconnect DIN Rail 448

Terminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals

Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil)

Terminal blocks with Push In connection technology. Product Information

Printview: Multilevel installation terminal block; N/L - Item No.:

Data sheet TERMSERIES TRZ 120VUC 1CO

Printview: Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning option - Item No.

Section 10: Terminal Blocks

SCREW-TYPE DISTRIBUTION BLOCKS

SMD TERMINAL BLOCKS. Small is Big!

SCREW-TYPE DISTRIBUTION BLOCKS

NEW. Datasheet. WMF 2.5 Terminal Series

Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series

PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.:

USA Canada On the Internet: Toll Free wieland Product Range Electrical Connections

Terminal Blocks. Section 12. Control Catalog 12-1

DIN Track Terminal Blocks

Datasheet WMF 2.5 Terminal Series NEW. Phone: Fax: Web: -

UK 6-FSI/C. Extract from the online catalog. Order No.:

CONTA-CONNECT. Disconnect terminals TRK/STK 2/TK

Electrical connection systems

Power distribution components

CONTA-CONNECT. Overview. Overview... 2 Our company... 3

Chapter 06 Accessories ACCESSORIES

I power distribution. Blocks. challenges. Finger-Safe / FSPDB Series...I2. MPDB Open-Style PDBs... I4. MPDB62-MPDB63 (Mini) Open-Style PDBs...

PT 2,5-QUATTRO-PE. Extract from the online catalog. Order No.:

X-COM - and X-COM S-SYSTEM Pluggable Rail-Mounted Terminal Blocks

W-series W-series W-series sets standards! W-series offers advantages 1) Easy project planning 3) Time-saving potential distribution

Data sheet... W-Series WPE 4

Series BHT. Specifications. B HT 6 pole + PE. B HT 10 pole + PE. B HT 16 pole + PE. B HT 24 pole + PE. Page

FEED-THROUGH 35 or 32mm DIN Rail

Output (AWG) Current (A)

Data sheet... W terminal earth terminal WPE 4

HT-Series Feed-Through Terminals Screw clamp connection Material:P66 Rail mount on TS32/TS35 or direct mounting Q ty.p.pck(g/pcs) HT /200 HT-4

PIT 2,5-TG. Extract from the online catalog. Order No.:

FEED-THROUGH TERMINALS SDK

3/2 Introduction. Unequipped Distribution Boards (Flat Pack) 3/6 8GK1 surface-mounting distribution boards

Extra functions. Phone: Fax: Web: Accessories P-Series. Terminals, P-Series

Stud connection system HSK

Australian Wiring Instructions:

PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.:

STS 2,5. Extract from the online catalog. Order No.:

Han-Power Energy Bus Components

Distribution terminal block; 3 x CAGE CLAMP connection 10 mm²; 1 x screw-clamp connection 35 mm²

...at Altech, of course!

Power Distribution Blocks

Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination

Insulated multipole operating tools for front-entry terminal blocks. 1-pole pole pole

onlinecomponents.com

PT 2,5-QUATTRO/2P BU. Extract from the online catalog. Order No.:

RockStar HighPower. Contents. RockStar HighPower Introduction C.2 C.1

Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination

44 SERIES. PCB/Plug-in relays from 6 to 10 A

V REG.-Nr. 6106, Z E SCHRACK. Accessories Industrial Power Relay RT. General Purpose Relays. pinnings 3.5mm / 5mm; relay height 15.

UKK 5-PV. Extract from the online catalog. Order No.:

ME series dead-front fused sectionalizing enclosures MEC current limiting fusing and MEP power fusing 200 Amperes,15-25 kv

3VU13, 3VU16 Circuit-Breakers

Electronic Circuit Breaker ESS20-0..

HOISTS RATCHET LEVER HOISTS

5 mm contact pin pitch PCB or 95 series sockets

Electronic Circuit Breaker ESS20

Unimate Range Pitch 5.08

Yale HOISTS. 414 West Broadway Ave. P.O. Box 769 Muskegon, MI PH: FX:

Han K 3/0, K 3/2 / Han HC Modular. Contents Technical characteristics Han K 3/0, Han K 3/ Inserts Han K 3/0, Han K 3/

A powerful way to manage your power distribution challenges. I Power Distribution Blocks

CONNECTORS - SINGLE POLE

Concept One Robot. Precision Remanufacturing. Munhofen Innovation, LLC. Robot Configuration Identifier. Austin, Texas.

Data sheet. W-Series WDU 4 SL/EN

PIN BULKHEAD CONNECTOR KIT

Pluggable installation system from Wieland Electric for integrated flexible lighting in the Segmüller megastore in Pulheim.

Main catalog. SNK series Terminal blocks. Phone: Fax: Web: -

Uninterruptible power supplies (UPS)

xxx.1xx xxx.4xx0. AgNi contacts, specifically intended for resistive and slightly inductive loads as well as for motor loads

New XNH fuse-switch disconnectors

BLOCK CATALOG SUPPLEMENT LOREM IPSUM DELORE LOREM IPSUM DELORE LOREM IPSUM

HYDRAULIC CRIMPING TOOL HT51

DIN Track Terminal Blocks with Screw Terminals XW5T

Technical Brochure. Rotary Type Installation Switches A, 500 V. Brochure OT_M 22 GB D Low Voltage Products

Save space.cut costs. Broaden your network. AccessNET

XL 3 -N SimPly, EfficiEnt And SAfE. 3 - PHASE distribution boards up to 250 A

1.6 Accessories include tool-free snap-in technology options for air flow, cable management, shelves, power distribution units, etc.

Selection Guide Motor Control Device Solutions

The Complete Range. Drawing of the NH Fuse-Switch, 3-pole switching, horizontal design for busbar supply on a 60 mm busbar systems

Technical Specification for Pole Mounted Capacitor Rack

Transcription:

110 fasis

fasis WTP DIN rail terminal blocks with push-in connection Terminate wires easily, directly and without tools! fasis WTP DIN rail terminal blocks with push-in connection. Built according to an effective and comprehensive concept, including compact design and high-performance contact technology, fasis WTP reduces installation time and keeps inventory costs to a minimum. The product line includes feed-through and ground blocks with 2, or 4 termination points, as well as multi-tier blocks. fasis WTP has been designed for use in machinery and plant engineering, as well as power distribution for buildings. Connection cross-sections up to 10 mm² of up to 57 A of up to 1000 V 111

fasis WTP wires simply push-in Connect without tools Push-in connection Wires connect directly Nominal cross section Width fasis push-in 2.5 mm² 4 mm² 6 mm² 10 mm² 2 A 57 A 5 mm 8 mm WTP 2,5/4 WTP 6/10 The same functionality fewer items 2.5 & 4 mm² and 6 & 10 mm² in one block Integrated release lever No mix-up of wire-entry and screwdriver entry points No contact with live parts Use of Philips head screwdriver also possible Plug & Play Completing the Concept Dual jumpering channels Plug-in jumper bars Plug-in test adapter 112

Wieland jumpering system Perfect technology Steel Copper Perfect technology Copper current bar guarantees low contact resistance Steel spring guarantees strength, durability, and long-term stability Extremely rugged! Indestructible steel spring Vibration-proof connection Simple customization Individual poles easy to remove Circuits easy to identify Wieland marking system Reliable identification Marking strips Dependable Maximum hold to the terminal Solidify integrity of the assembly Endless strip Effective Mounting facilty for endless strips permits single step marking of entire assembly Continuous labeling Uses commercially available labeling systems Marking tags Individual Individual labeling with minimum effort Ideal for service and maintenance 11

Feed-through blocks with push-in connection WTP 2,5/4 Feed-through block with push-in connection for mounting on TS 5 Feed-through block, gray Feed-through block, blue WTP 2,5/4 56.20.0055.0 100 WTP 2,5/4 BLAU 56.20.0055.6 100 5 mm / 47 mm / 8 mm EN 60 947-7-1 pending pending pending 2 A APFN 2,5 07.12.6755.0 10 TWFN 2,5 07.12.6855.0 10 * 1000 V / pollution degree 2 WTP 2,5/4 D1/2 Duo feed-through block with push-in connection for mounting on TS 5 Feed-through block, gray Feed-through block, blue WTP 2,5/4 D1/2 56.20.5055.0 100 WTP 2,5/4 D1/2 BLAU 56.20.5055.6 100 5 mm / 60 mm / 8 mm EN 60 947-7-1 pending pending pending 2 A APFN 2,5 D1/2 07.12.6955.0 10 TWFN 2,5 D1/2 07.12.7055.0 10 * 1000 V / pollution degree 2 WTP 2,5/4 D2/2 Duo feed-through block with push-in connection for mounting on TS 5 Feed-through block, gray Feed-through block, blue WTP 2,5/4 D2/2 56.20.5155.0 100 WTP 2,5/4 D2/2 BLAU 56.20.5155.6 100 5 mm / 72 mm / 8 mm EN 60 947-7-1 pending pending pending 2 A APFN 2,5 D2/2 07.12.7155.0 10 TWFN 2,5 D2/2 07.12.7255.0 10 * 1000 V / pollution degree 2 114

Feed-through blocks with push-in connection WTP 6/10 Feed-through block with push-in connection for mounting on TS 5 Nominal cross section 10 mm 2 Feed-through block, gray Feed-through block, blue Cross section fine-stranded 0.,2 10 mm 2 Cross section solid/stranded 0.2 10 mm 2 WTP 6/10 56.206.0055.0 100 WTP 6/10 BLAU 56.206.0055.6 100 8 mm / 58 mm / 44 mm 12 mm EN 60 947-7-1 pending pending pending 57 A 1000 V AP WTP 6/10 07.1.4155.0 10 TW WTP 6/10 07.1.4255.0 10 Accessories for fasis WTP... Accessories for WTP 2,5/4... Type Part No. Std. Pack Cross connector, insulated 2 pole IVB WKF 2,5 2 Z7.280.6227.0 10 pole IVB WKF 2,5 Z7.280.627.0 10 4 pole IVB WKF 2,5 4 Z7.280.6427.0 10 5 pole IVB WKF 2,5 5 Z7.280.6527.0 10 6 pole IVB WKF 2,5 6 Z7.280.6627.0 10 7 pole IVB WKF 2,5 7 Z7.280.6727.0 20 8 pole IVB WKF 2,5 8 Z7.280.6827.0 20 9 pole IVB WKF 2,5 9 Z7.280.6927.0 20 10 pole IVB WKF 2,5 10 Z7.280.7027.0 20 20 pole IVB WKF 2,5 20 Z7.280.8027.0 20 Wire entry guide 0.1 0.2 mm 2 LELN 2,5/1 WEISS 05.564.755.0 100 0.25 0.5 mm 2 LELN 2,5/2 GRAU 05.564.855.0 100 0.75 1.0 mm 2 LELN 2,5/ SCHWARZ 05.564.955.0 100 Test adapter, modular PS WKC/F Z1.299.975.0 10 Test plug ST 2/2, Z5.55.2921.0 10 Screwdriver, uninsulated DIN 5264 B 0,6x,5 06.502.4000.0 5 Screwdriver, uninsulated, MINI DIN 5264 B 0,6x,5 M 06.502.5000.0 10 Accessories for WTP 6/10... Type Part No. Std. Pack Cross connector, insulated 2 pole IVB WKFN 6 2 Z7.282.5227.0 10 pole IVB WKFN 6 Z7.282.527.0 10 4 pole IVB WKFN 6 4 Z7.282.5427.0 10 5 pole IVB WKFN 6 5 Z7.282.5527.0 10 10 pole IVB WKFN 6 10 Z7.282.6027.0 10 Test plug ST 2/2, Z5.55.2921.0 10 Screwdriver, uninsulated DIN 5264 B 0,8x4 06.502.4100.0 5 115

Ground blocks with push-in connection WTP 2,5/4 PE Ground block with push-in connection for mounting on TS 5 Ground block, green/yellow WTP 2,5/4 PE 56.20.9055.0 100 5 mm / 47 mm / 8 mm APFN 2,5 07.12.6755.0 10 TWFN 2,5 07.12.6855.0 10 * 1000 V / pollution degree 2 WTP 2,5/4 D1/2/PE Duo ground block with push-in connection for mounting on TS 5 Ground block, green/yellow WTP 2,5/4 D1/2/PE 56.20.955.0 100 5 mm / 60 mm / 8 mm APFN 2,5 D1/2 07.12.6955.0 10 TWFN 2,5 D1/2 07.12.7055.0 10 * 1000 V / pollution degree 2 WTP 2,5/4 D2/2/PE Duo ground block with push-in connection for mounting on TS 5 Ground block, green/yellow WTP 2,5/4 D2/2/PE 56.20.9155.0 100 5 mm / 72 mm / 8 mm APFN 2,5 D2/2 07.12.7155.0 10 TWFN 2,5 D2/2 07.12.7255.0 10 * 1000 V / pollution degree 2 116

Ground blocks with push-in connection WTP 6/10 PE Ground block with push-in connection for mounting on TS 5 Nominal cross section 10 mm 2 Ground block, green/yellow Cross section fine-stranded 0.2 10 mm 2 Cross section solid/stranded 0.2 10 mm 2 WTP 6/10 PE 56.206.9055.0 100 8 mm / 58 mm / 44 mm 12 mm 1000 V AP WTP 6/10 07.1.4155.0 10 TW WTP 6/10 07.1.4255.0 10 Accessories for fasis WTP... Accessories for WTP 2,5/4... Type Part No. Std. Pack Cross connector, insulated 2 pole IVB WKF 2,5 2 Z7.280.6227.0 10 pole IVB WKF 2,5 Z7.280.627.0 10 4 pole IVB WKF 2,5 4 Z7.280.6427.0 10 5 pole IVB WKF 2,5 5 Z7.280.6527.0 10 6 pole IVB WKF 2,5 6 Z7.280.6627.0 10 7 pole IVB WKF 2,5 7 Z7.280.6727.0 20 8 pole IVB WKF 2,5 8 Z7.280.6827.0 20 9 pole IVB WKF 2,5 9 Z7.280.6927.0 20 10 pole IVB WKF 2,5 10 Z7.280.7027.0 20 20 pole IVB WKF 2,5 20 Z7.280.8027.0 20 Wire entry guide 0.1 0.2 mm 2 LELN 2,5/1 WEISS 05.564.755.0 100 0.25 0.5 mm 2 LELN 2,5/2 GRAU 05.564.855.0 100 0.75 1.0 mm 2 LELN 2,5/ SCHWARZ 05.564.955.0 100 Test adapter, modular PS WKC/F Z1.299.975.0 10 Test plug ST 2/2, Z5.55.2921.0 10 Screwdriver, uninsulated DIN 5264 B 0,6x,5 06.502.4000.0 5 Screwdriver, uninsulated, MINI DIN 5264 B 0,6x,5 M 06.502.5000.0 10 Accessories for WTP 6/10... Type Part No. Std. Pack Cross connector, insulated 2 pole IVB WKFN 6 2 Z7.282.5227.0 10 pole IVB WKFN 6 Z7.282.527.0 10 4 pole IVB WKFN 6 4 Z7.282.5427.0 10 5 pole IVB WKFN 6 5 Z7.282.5527.0 10 10 pole IVB WKFN 6 10 Z7.282.6027.0 10 Test plug ST 2/2, Z5.55.2921.0 10 Screwdriver, uninsulated DIN 5264 B 0,8x4 06.502.4100.0 5 117

Multi-tier blocks with push-in connection WTP 2,5/4 E Multi-tier block with push-in connection for mounting on TS 5 Multi-tier block, gray WTP 2,5/4 E 56.20.7055.0 100 5 mm / 82 mm / 48 mm EN 60 947-7-1 pending pending pending 24 A 500 V 6 kv APFN 2,5 E 07.12.755.0 10 TWFN 2,5 E 07.12.7455.0 10 Marking tag carrier, 2-fold BT 5/2 04.24.0855.0 100 WTP 2,5/4 E VB Multi-tier block, vertically connected, with push-in connection for mounting on TS 5 Multi-tier block, black WTP 2,5/4 E VB 56.20.6955.1 100 5 mm / 82 mm / 48 mm 24 A 500 V 6 kv APFN 2,5 E 07.12.755.0 10 TWFN 2,5 E 07.12.7455.0 10 Marking tag carrier, 2-fold BT 5/2 04.24.0855.0 100 WTP 2,5/4 E PE Multi-tier ground block with push-in connection for mounting on TS 5 Multi-tier ground block, green/yellow WTP 2,5/4 E PE 56.20.8955.0 100 5 mm / 82 mm / 48 mm 500 V 6 kv APFN 2,5 E 07.12.755.0 10 118

Accessories for fasis WTP 2,5/4... Cross connector, insulated 2 pole IVB WKF 2,5 2 Z7.280.6227.0 10 pole IVB WKF 2,5 Z7.280.627.0 10 4 pole IVB WKF 2,5 4 Z7.280.6427.0 10 5 pole IVB WKF 2,5 5 Z7.280.6527.0 10 6 pole IVB WKF 2,5 6 Z7.280.6627.0 10 7 pole IVB WKF 2,5 7 Z7.280.6727.0 20 8 pole IVB WKF 2,5 8 Z7.280.6827.0 20 9 pole IVB WKF 2,5 9 Z7.280.6927.0 20 10 pole IVB WKF 2,5 10 Z7.280.7027.0 20 20 pole IVB WKF 2,5 20 Z7.280.8027.0 20 Vertical cross connector, insulated IVB WKF V Z7.261.1127.0 20 Wire entry guide 0.1 0.2 mm 2 LELN 2,5/1 WEISS 05.564.755.0 100 0.25 0.5 mm 2 LELN 2,5/2 GRAU 05.564.855.0 100 0.75 1.0 mm 2 LELN 2,5/ SCHWARZ 05.564.955.0 100 Test adapter, modular PS WKC/F Z1.299.975.0 10 Test plug ST 2/2, Z5.55.2921.0 10 Screwdriver, uninsulated DIN 5264 B 0,6x,5 06.502.4000.0 5 Screwdriver, uninsulated, MINI DIN 5264 B 0,6x,5 M 06.502.5000.0 10 119