Reliable low profile LED Street Light 37 W - 60 W 75 W - 120 W 140 W - 150 W 180-240 W Features: * Modern appearance and self-cleaning * Integrated design for high strength and better waterproofing IP65 *Functional heatsink fins and holes around the light body for the best possible heat dissipation *High-thermal conductivity aluminium and magnesium alloys heatsink also maximise the heat dissipation to ensure long lifespan. *Good monochromaticity, lower glare and high lux even light distribution * Thin, light weight to reduce wind loading on posts. * Secondary optics technology makes the light efficiency more than 90% * Green environmental protection, with no lead or mercury. * Flexible installation options, Long lifespan *Without a reflector there are no requirements for cleaning and other maintenance requirements.
Applications: highway, secondary roads, park, yard, plant area, garden, and parking area. Name Item. No. Power W PF Luminous LM Beam Angle Dimension cm Net.Wet Kg Equal to HPS W 37W LED Street light BDZ 220/37 55 J 37 >0.95 3045 54X22X10 3.9 light sourcepower:70 TotalPower:105 50W LED Street light BDZ 220/50 55 J 50 >0.95 4410 54X22X10 3.9 light sourcepower:100 TotalPower:137 60W LED Street light BDZ 220/60 55 J 60 >0.95 4200 54X22X10 3.9 light sourcepower:100 TotalPower:137 75W LED Street light BDZ 220/75 55 J 75 >0.95 6300 68X30X10 6.1 light sourcepower:100 TotalPower:137 108W LED Street light BDZ 220/108 55 J 108 >0.95 9240 68X30X10 6.1 light sourcepower:150 TotalPower:225 120W LED Street light BDZ 220/120 55 J 120 >0.95 9500 68X30X10 6.1 light sourcepower:150 TotalPower:225 140W LED Street light BDZ 220/140 55 J 140 >0.95 12600 80X38X11 10.4 light sourcepower:250 150W LED Street light BDZ 220/150 55 J 150 >0.95 13125 80X38X11 10.4 TotalPower:350 180W LED Street light BDZ 220/180 55 J 180 >0.95 15750 95X38X11 12 light sourcepower:400 TotalPower:500 210W LED Street light BDZ 220/210 55 J 210 >0.95 18900 95X38X11 12 light sourcepower:400 TotalPower:500
Sealed and hinged connector box Super thin heat-sink fins and holes around for extending LED life Lens for controlling secondary optical design One piece die-cast lamp body Separate power driver compartment
Agent for Advanced Optronic Devices
Note: AOD Standard Color Temperatures: 2700±150K 3000±180K 3500±200K 4000±250K 4500±250K 5000±300K 5700±300K 6500±500K.
Luminous Flux Maintenance Chart These data were obtained through the test samples worked at 240VAC at the general room temperature and lighted constantly in a long-term. Measurements of the luminous flux, luminous efficiency and other parameters once a month. Installation Instructions 1. Please check the integrity of the products when unpacking. 2. The distance between this product and any flammable materials must not be less than 0.2m. Make sure the distance between the upper part of the installed light and the ceiling is not less than 2cm. This product must not be installed into ceilings or walls that contain heat-insulating materials. The main cable must not be connected with the low voltage cable or the surface-mounted lights. 3. When laying the cables, make sure the cables and plugs are not subjected to any tensile or twisting forces. 4. After installation, connect the low voltage plug to the switched power supply.
Attention: 1 The connection of the wires should be done by a qualified electrician referring to the installation guide. 3. The operating voltage cannot exceed the specified range (185~277VAC). 4. Disassembly of the light without permission is will void warranty. For any problem please contact our customer service department. After-sale service If you have any questions or problems in the process of unpacking, installation and use, please contact our Customer Service Department. We will respond as soon as possible, and if necessary, we will promptly send our maintenance professionals to reach your site as quickly as possible to solve your trouble and restore to the normal working condition. KLL takes guarantee responsibility unless otherwise specified in the following circumstances: The breakdown or the damage is caused by incorrect installation, failure operation or use under the Non-specified working conditions. The damage is caused by accident, abuse or misuse. The breakdown or the damage is caused by customers unsuitable safekeeping or transportation. The breakdown or the damage is caused by customers disassembly or changing the spare parts to which are not approved by AOD. AOD will constantly improve our production performance and insist on innovation. The information contained in this document is the lately data at the deadline for edition and subject to change without notice. AOD reserves the right to the interpretation of this document. The pictures shown here is indicative only. If there is inconsistency between the pictures and the actual product, the actual product shall govern.