Table of Contents. ETP Steel Boxes and Covers

FF Table of Contents CL-9 JB Bracket OCR2 4G5075S 50L 4OE-/2 4CS-/2 3GC-75 4SL-/2 8365N 4SJD-EK SX60 250 56N 4SROB-EK M-350 8409A 8486B 8487 2594 389 389VB GR2 FF Types Clamps and Brackets FF2 Miscellaneous Information FF3 Capacity of Steel Boxes and Covers FF4-FF5 4 Ceiling Fan Boxes FF6 4 Ceiling Fan Boxes with Support Bar Hangers FF7 4 Round Boxes FF8 3 4 Round and Octagonal Boxes and Covers FF9 3 4 Octagon Box Extension Ring FF9 4 Octagon Boxes - with Conduit Knock Outs FF0 4 Octagon Boxes - with Nonmetallic Sheathed Cable Clamps FF 4 Octagon Boxes - Armored Cable Clamps FF2 4 Octagon Box Extension Rings FF2 4 Octagon and Round Box Covers FF3 4 Square Boxes - with Conduit Knock Outs FF4-FF6 4 Square Boxes with Ground Wire FF7 4 Square Boxes - with Nonmetallic Cable Clamps FF8 4 Square Boxes - with Armored/Metal Clad Cable Clamps FF9 4 Square Boxes for Metal Stud Mounting FF20 4 Square Box Extension Rings and Covers FF2 4 Square Box Covers FF22-FF26 4 6 Square Boxes - with Conduit Knock Outs FF27 4 6 Square Boxes with Ground Wire FF28 4 6 Square Boxes - with Conduit Knock Outs FF29 4 6 Square Box Extension Rings FF29 4 6 Square Box Covers FF30-FF35 4 Square Boxes - Red FF36 4 Square Box Extension Rings and Thru Ring - Red FF37 4 Square Box Cover - Red FF37 4 6 Square Boxes - Red FF38 4 6 Square Box Extension Ring - Red FF38 4 6 Square Box Cover - Red FF39 Handy Boxes FF40-FF4 Handy Box Extension Rings FF4 Solid Gang Handy Boxes FF42 Handy Box Covers FF43 4 Octagon Concrete Boxes and Back Plates FF44 Bar Hangers FF45 Switch Boxes - with Conduit Knock Outs FF46-FF48 Switch Boxes - with Nonmetallic Cable Clamps FF49-FF5 Switch Boxes with Ground Wire FF52 Switch Boxes - with Armored/Metal Clad Cable Clamps FF53-FF54 Switch Boxes with Ground Wire FF55 Multigang Switch Boxes FF56 Multigang Switch Box Covers FF57 Masonry Boxes FF58-FF59 Accessories FF60

FF2 FF2 Styles of Clamps (installed parts only) CL-9 Clamp Type For nonmetallic cable CL-20 Clamp Type For nonmetallic cable CL-24 Clamp Type For nonmetallic cable CL-26 Clamp Type For nonmetallic cable CL-3 Clamp Type For armored cable (AC), metal-clad cable (MCI, MCI-A, MCC) and flexible metal conduit CL-25 Clamp Type For armored cable and flexible metal conduit Styles of Brackets (installed parts only except where noted with *) JB Bracket Plain NL Bracket Stud NL Bracket Snap-in Metal Stud Bracket MSC-OB Outlet Box Metal Stud Clip * for indiviual sale 892 LOX BOX Switch Box Supports * for indiviual sale Plain Offset Side Combination Brackets Barbed-Hook Vertical Plain Vertical Bracket Vertical Bracket with Stud Plain Vertical Bracket Plain Vertical Angle Bracket Offset Vertical Bracket Plain Vertical Bracket

FF3 Outlet and Switch Boxes: Material, Finish, Knockouts, Fire-Rated Assemblies, Compliances, Groundskeeper Raised Ground Boss Outlet and Switch Boxes Material and Finishes Material: AISI/SAE 008 Finish: Hot dip galvanized G60, 0.60 oz/sq ft Thickness: 0.0625 minimum FF3 Concentric and Eccentric Knockouts Boxes with concentric or eccentric knockouts are suitable for bonding without any additional bonding means where used in circuits above or below 250V. Unless otherwise noted all concentric or eccentric knockouts are ½ ¾ combinations. Use in Fire-Rated Assemblies Single and double gang metallic outlet and switch boxes are acceptable for use in two-hour fire rated walls. For additional information refer to the UL guide card information for metallic outlet boxes, QCIT. Groundskeeper Raised Ground Boss Groundskeeper raised ground feature on boss inside box provides one or two #0-32 tapped hole, allowing a 3/8 long green ground screw to be threaded into box without contacting mounting surface. Other boxes provided with flat ground tapped hole, except Plenum Boxes. See FF page 60 for ground screws, pigtails and accessories. Compliances UL Standard 54A NEMA OS- Federal Specifiation A-A5924 (formerly W-J-800)

FF4 Capacity of Steel Boxes & Covers FF4 The number of conductors and devices allowed in a box is limited by the cubic-inch capacity of the box. Unless superseded by local codes, Section 34-6 of the National Electrical Code governs the number of wires permitted. Section 34-6 is reproduced below: 34.6 Number of Conductors in Outlet, Device, and Junction Boxes, and Conduit Bodies. Boxes and conduit bodies shall be of sufficient size to provide free space for all enclosed conductors. In no case shall the volume of the box, as calculated in 34.6(A), be less than the fill calculation as calculated in 34.6(B). The minimum volume for conduit bodies shall be as calculated in 34.6(C). The provisions of this section shall not apply to terminal housings supplied with motors. FPN: For volume requirements of motor terminal housings, see 430.2. Boxes and conduit bodies enclosing conductors 4 AWG or larger shall also comply with the provisions of 34.28. (A) Box Volume Calculations. The volume of a wiring enclosure (box) shall be the total volume of the assembled sections and, where used, the space provided by plaster rings, domed covers, extension rings, and so forth, that are marked with their volume or are made from boxes the dimensions of which are listed in Table 34.6(A). () Standard Boxes. The volumes of standard boxes that are not marked with their volume shall be as given in Table 34.6(A). (2) Other Boxes. Boxes 650 cm3 (00 in.3) or less, other than those described in Table 34.6(A), and nonmetallic boxes shall be durably and legibly marked by the manufacturer with their volume. Boxes described in Table 34.6(A) that have a volume larger than is designated in the table shall be permitted to have their volume marked as required by this section. (B) Box Fill Calculations. The volumes in paragraphs 34.6(B)() through (B)(5), as applicable, shall be added together. No allowance shall be required for small fittings such as locknuts and bushings. () Conductor Fill. Each conductor that originates outside the box and terminates or is spliced within the box shall be counted once, and each conductor that passes through the box without splice or termination shall be counted once. A looped, unbroken conductor not less than twice the minimum length required for free conductors in 300.4 shall be counted twice. The conductor fill shall be calculated using Table 34.6(B). A conductor, no part of which leaves the box, shall not be counted. Exception: An equipment grounding conductor or conductors or not over four fixture wires smaller than 4 AWG, or both, shall be permitted to be omitted from the calculations where they enter a box from a domed luminaire (fixture) or similar canopy and terminate within that box. (2) Clamp Fill. Where one or more internal cable clamps, whether factory or field supplied, are present in the box, a single volume allowance in accordance with Table 34.6(B) shall be made based on the largest conductor present in the box. No allowance shall be required for a cable connector with its clamping mechanism outside the box. (3) Support Fittings Fill. Where one or more luminaire (fixture) studs or hickeys are present in the box, a single volume allowance in accordance with Table 34.6(B) shall be made for each type of fitting based on the largest conductor present in the box. (4) Device or Equipment Fill. For each yoke or strap containing one or more devices or equipment, a double volume allowance in accordance with Table 34.6(B) shall be made for each yoke or strap based on the largest conductor connected to a device(s) or equipment supported by that yoke or strap.

FF5 Capacity of Steel Boxes & Covers FF5 Table 34.6(A) Metal Boxes Box Trade Size Minimum Volume Maximum Number of Conductors* mm in. cm 3 in. 3 8 6 4 2 0 8 6 00 32 (4 ¼) round/octagonal 205 2.5 8 7 6 5 5 5 2 00 38 (4 ½) round/octagonal 254 5.5 0 8 7 6 6 5 3 00 54 (4 2) round/octagonal 353 2.5 4 2 0 9 8 7 4 00 32 (4 ¼) square 295 8.0 2 0 9 8 7 6 3 00 38 (4 ½) square 344 2.0 4 2 0 9 8 7 4 00 54 (4 2) square 497 30.3 20 7 5 3 2 0 6 20 32 (4 ¼) square 48 25.5 7 4 2 0 8 5 20 38 (4 ½) square 484 29.5 9 6 4 3 9 5 20 54 (4 2) square 689 42.0 28 24 2 8 6 4 8 75 50 38 (3 2 ½) device 23 7.5 5 4 3 3 3 2 75 50 50 (3 2 2) device 64 0.0 6 5 5 4 4 3 2 75 50 57 (3 2 2¼) device 72 0.5 7 6 5 4 4 3 2 75 50 65 (3 2 2½) device 205 2.5 8 7 6 5 5 4 2 75 50 70 (3 2 2¾) device 230 4.0 9 8 7 6 5 4 2 75 50 90 (3 2 3½) device 295 8.0 2 0 9 8 7 6 3 00 54 38 (4 2 ½) device 69 0.3 6 5 5 4 4 3 2 00 54 48 (4 2 ) device 23 3.0 8 7 6 5 5 4 2 00 54 54 (4 2 2) device 238 4.5 9 8 7 6 5 4 2 95 50 65 (3¾ 2 2½) masonry box/gang 230 4.0 9 8 7 6 5 4 2 95 50 90 (3¾ 2 3½) masonry box/gang 344 2.0 4 2 0 9 8 7 4 min. 44.5 depth FS single cover/gang (¾) 22 3.5 9 7 6 6 5 4 2 min. 60.3 depth FD single cover/gang (2) 295 8.0 2 0 9 8 7 6 3 min. 44.5 depth FS multiple cover/gang (¾) 295 8.0 2 0 9 8 7 6 3 min. 60.3 depth FD multiple cover/gang (2) 395 24.0 6 3 2 0 9 8 4 *Where no volume allowances are required by 34.6(B)(2) through (B)(5). Table 34.6(B) Volume Allowance Required per Conductor Free Space Within Box for Each Conductor Size of Conductor (AWG) cm 3 in. 3 8 24.6.50 6 28.7.75 4 32.8 2.00 2 36.9 2.25 0 4.0 2.50 8 49.2 3.00 6 8.9 5.00 Reproduced with permission NFPA. - All National Electrical Code references are from the 2005 edition.

FF6 4 Round Ceiling Fan Boxes FF6 All boxes provided with plastic non-metallic sheathed cable connector, hardware and instruction sheet. Complies with NEC 422.8 for up to 35 lbs. of ceiling fan load or 70 lbs. of fi xture load. FFS-4CL Bracket, Offset or Cubic Std. Number Depth Clamp Type Expansion Knockouts Inches Pkg. FFS-4CL /2 (2) /2 5.8 20 4 Octagonal Ceiling Fan Boxes All boxes provided with plastic non-metallic sheathed cable connector, hardware and instruction sheet. Complies with NEC 422.8 for up to 35 lbs. of ceiling fan load or 70 lbs. of fi xture load. NM Clamp installed in all -/2 and 2-/8 boxes. AC/MC Cable Clamp is also provided and can be used to replace NM sheathed cable clamp. FFS-56L FFS-56LD FFS-56LD-VB-NW Bracket, Offset or Cubic Std. Number Depth Clamp Type Expansion Knockouts Inches Pkg. FFS-56L -/2 AC/MC, NM (3) /2 5.5 20 FFS-56LD 2-/8 AC/MC, NM (3) /2 2.5 20 FFS-56LD-VB-NW 2-/8 AC/MC, NM FB, /2 (2) /2 2.5 20

FF7 4 Round Ceiling Fan Boxes with Support Bar Hangers Box provided with plastic non-metallic sheathed cable connector, hardware and instruction sheet. Complies with NEC 422.8 for up to 35 lbs. of ceiling fan load or 70 lbs. of fi xture load. FF7 FFS-4CL-NBH Bracket, Offset or Cubic Std. Number Depth Clamp Type Expansion Knockouts Inches Pkg. FFS-4CL-NBH /2 NBH, 6 to 24 (2) /2 5.8 0 Note: NBH is for new construction. 4 Octagonal Ceiling Fan Boxes with Support Bar Hangers All boxes provided with plastic non-metallic sheathed cable connector, hardware and instruction sheet. Complies with NEC 422.8 for up to 35 lbs. of ceiling fan load or 70 lbs. of fi xture load. NM Clamp installed in all -/2 and 2-/8 boxes. AC/MC Cable Clamp is also provided and can be used to replace NM sheathed cable clamp. FFS-56L-NBH FFS-56L-OBH FFS-56LD-NBH FFS-56LD-OBH Bracket, Offset or Cubic Std. Number Depth Clamp Type Expansion Knockouts Inches Pkg. FFS-56L-NBH -/2 AC/MC, NM NBH, 6 to 24 (3) /2 5.5 0 FFS-56L-OBH -/2 AC/MC, NM OBH, 6 to 24 (3) /2 5.5 0 FFS-56LD-NBH 2-/8 AC/MC, NM NBH, 6 to 24 (3) /2 2.5 0 FFS-56LD-OBH 2-/8 AC/MC, NM OBH, 6 to 24 (3) /2 2.5 0 Note: NBH is for new construction. OBH is for rehabbing old construction.

FF8 3 4 Round Boxes With Nonmetallic Sheathed Cable Clamps FF8 Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 50LC* 2 4.5 CL-9 -- -- (3) 2 29.0 50 (365) (4) 2 32 50LC 2 Deep 50L 2 4.5 -- -- -- (3) 2 48.0 50 (4) 2 32 * Not UL Listed 50L 2 Deep 3 4 Round Covers For 3 /4 Octagon and Round Boxes Number Depth Cubic In. Knockout Wt. Lbs. Std. (Universal No.) (inches) Cap. Description Per 00 Pkg. 830A Flat 0.0 Blank 7 50 (24C) 8320 Flat 0.0 2 KO 7 50 (24C6) 830A 8320 2-3/4 Cover Hole Centerline. 4 Round Box With Conduit Knockouts in Bottom Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4CL 2 6.0 -- -- (5) 2 36.0 50 (56) 4CL 2 Deep 3-/2 Cover Hole Centerline.

FF9 3 4 Octagonal Boxes With Conduit Knockouts FF9 Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 3O-/2 2 0.5 -- (4) 2 -- () 2 38.0 50 (245 2) 3O-/2 2 Deep With Nonmetallic Sheathed Cable Clamps Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 560L 2.9 CL-26 (2) 2 (4) 2 32 () 2 48.0 50 (245-N) (4) 2 32 560LXE 2.9 CL-26 (2) 2 (4) 2 32 () 2 5.0 50 (245-NE) (4) 2 32 560LVB 2.9 CL-26 () 2 (4) 2 32 () 2 56.0 50 (245NF) (4) 2 32 560L 2 Deep Two nail holes each end 2-3/4 Cover Hole Centerline. 560LXE 2 Deep Plaster Ears 560LVB 2 Deep Plain Vertical bracket set back 5 8 3 4 Octagon Box Extension Ring With Conduit Knockouts Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 3OE-/2 2 0.5 (4) 2 -- -- 34.0 25 (255 2) 2-3/4 Cover Hole Centerline. 3OE-/2 2 Deep

FF0 4 Octagon Boxes With Conduit Knockouts FF0 4O-/2 2 Deep 4O-3/4 2 Deep 4O-SPL 2 Deep 4OJB-/2 2 Deep JB Bracket set flush, gauging notches 3 8 & 2 4OD-/2 2 8 Deep 4OD-3/4 2 8 Deep 4OD-SPL 2 8 Deep 4OVB-/2 2 Deep Vertical bracket with stud set back 5 8 Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4O-/2 2 5.5 (4) 2 -- (5) 2 52.0 25 (545 2) 4O-3/4 2 5.5 (4) 3 4 -- (3) 2 52.0 25 (545 3 4) (2) 3 4 4O-SPL 2 5.5 (2) 2 -- (3) 2 52.0 25 (545SPL) (2) 3 4 (2) 3 4 4OJB-/2 2 5.5 (4) 2 -- (5) 2 68.0 25 (545J 2) 4OD-/2 2 8 2.5 (4) 2 -- (5) 2 66.0 50 (547 2) 4OD-3/4 2 8 2.5 (4) 3 4 -- (3) 2 66.0 25 (547 3 4) (2) 3 4 4OD-SPL 2 8 2.5 (2) 2 -- (3) 2 68.0 25 (547SPL) (2) 3 4 (2) 3 4 4OVB-/2 2 5.5 (3) 2 -- (5) 2 62.0 25 (545F 2) SX5-40-/2 2 5.5 (4) 2 -- (4) 2 92.0 25 SX5-40-/2 2 Deep 40 2 box on SX5 stud bar hanger adjusts from 2 to 8 2 3-/2 Cover Hole Centerline.

FF 4 Octagon Boxes With Nonmetallic Sheathed Cable Clamps FF 56L 2 Deep 56N 2 Deep Four nail holes each end 56LJB 2 Deep JB Bracket set flush, Gauging notches 3 8 & 2 56LVB 2 Deep Bracket set back 5 8 56LXE 2 Deep Plaster ears 56LD 2 8 Deep 56LDJB 2 8 Deep JB Bracket set back Gauging notches set back 3 8 & 2 Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 56L 2 5.5 CL-26 (2) 2 (4) 2 32 () 2 57.0 50 (545) 56N 2 5.5 CL-26 (2) 2 (4) 2 32 () 2 57.0 50 (545N) 56LJB 2 5.5 CL-26 (2) 2 (4) 2 32 () 2 74.0 25 (545JN) 56LVB 2 5.5 CL-26 () 2 (4) 2 32 () 2 66.0 25 (545FN) 56LXE 2 5.5 CL-26 (2) 2 (4) 2 32 () 2 62.0 50 (545NE) 56LD 2 8 2.5 CL-26 (2) 2 (4) 2 32 () 2 70.0 25 (547N) 56LDJB 2 8 2.5 CL-26 (2) 2 (4) 2 32 () 2 84.0 25 (547JN) SX8-56L 2 5.5 CL-26 (2) 2 (4) 2 32 -- 96.0 25 SX5-56L 2 5.5 CL-26 (2) 2 (4) 2 32 -- 99.0 25 3-/2 Cover Hole Centerline. SX8-56L 2 Deep 56L box on SX8 clip bar Hanger adjusts from 2 to 8 2 SX5-56L 2 Deep 56L box on SX5 stud bar Hanger adjusts from 2 to 8 2

FF2 4 Octagon Boxes With Armored Cable Clamps FF2 55L 2 Deep Two nail holes each end 55LJB 2 Deep JB Bracket set flush, Gauging Notches 3 8 & 2 55LDJB 2 8 Deep JB Bracket set back, Gauging Notches 3 8 & 2 Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 55L 2 5.5 CL-25 (2) 2 (4) 2 32 () 2 6.0 50 (545X) (4) 2 32 55LJB 2 5.5 CL-25 (2) 2 (4) 2 32 () 2 74.0 25 (4) 2 32 55LDJB 2 8 2.5 CL-25 (2) 2 (4) 2 32 () 2 84.0 25 (4) 2 32 SX5-55L 2 5.5 CL-25 (2) 2 (4) 2 32 03.0 25 (4) 2 32 3-/2 Cover Hole Centerline. 4 Octagon Box Extension Rings With Conduit Knockouts SX5-55L 2 Deep 55L box on SX5 stud bar Hanger adjusts from 2 to 8 2 4OE-/2 2 Deep 4OE-3/4 2 Deep 4OE-SPL 2 Deep Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 4OE-/2 2 5.5 -- (4) 2 -- -- 37.0 50 (555 2) 4OE-3/4 24 5.5 -- (4) 3 4 -- -- 39.0 50 (555 3 4) 4OE-SPL 2 5.5 -- (2) 2 -- -- 39.0 50 (555-SPL) (2) 3 4 3-/2 Cover Hole Centerline.

FF3 4 Octagon and Round Covers For 4 Octagon and Round Boxes FF3 8409A 2 Raised 8409 5 8 Raised 8403 843 849LR 8420LR Number Depth Cubic In. Knockout Wt. Lbs. Std. (Universal No.) (inches) Cap. Description Per 00 Pkg. 8409A 3.5 Ears 2 3 4 C to C 8.0 50 (54C3 2) 8409 5 8 Raised 4.5 Ears 2 3 4 C to C 20.0 50 (54C3 3 4) 8403 Flat 0.0 Blank 26.0 50 (540) 843 Flat 0.0 2 Knockout 26.0 50 (54C6) 849LR Flat 0.0 One Single Flush 2.0 50 (54-S) Receptacle 3 32 D 8420LR Flat 0.0 Duplex Receptacle 9.0 50 (54-D) 3-/2 Cover Hole Centerline.

FF4 4 Square Boxes - 2 Deep With Conduit Knockouts FF4 4SL-/2 4 Deep, Drawn 4S-/2 2 Deep, Welded 4S/2-DR 2 Deep, Drawn 4S-3/4 2 Deep, Welded 4S3/4-DR 2 Deep, Drawn 4SEK 2 Deep, Welded 4S-SPL 2 Deep, Welded 4S-SPL-DR 2 Deep, Drawn Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4SL-/2 4 8.0 (0) 2 -- (5) 2 6.0 50 (524 2) 4S-/2 2 2.0 (2) 2 -- (4) 2 73.0 50 (525 2) 4S/2-DR 2 2.0 (2) 2 -- (5) 2 73.0 50 (525 2) 4S-3/4 2 2.0 (8) 3 4 -- (2) 2 67.0 50 (525 3 4) (2) 3 4 4S3/4-DR 2 2.0 (8) 3 4 -- (2) 2 67.0 50 (525 3 4) (2) 3 4 4SP Plenum Box 2 Deep, Drawn Without any holes and with reset knockouts (Screws supplied with cover, number 8465P) 4SEK 2 2.0 (8) 2 -- (2) 2 72.0 50 (4)Eccentric KO (2)Eccentric KO 4S-SPL 2 2.0 (8) 2 -- (2) 2 73.0 50 (525-SPL) (4) 3 4 -- (2) 3 4 4S-SPL-DR 2 2.0 (8) 2 -- (2) 2 73.0 50 (525-SPL) (4) 3 4 (2) 3 4 4SP 2 2.0 (8) 2 -- (3) 2 70.0 50 (4) 3 4 (2) 3 4 Red Box available on FF36

FF5 4 Square Boxes - 2 Deep With Conduit Knockouts FF5 4SVB3/4PL 2 Deep, Welded Plain vertical bracket 4SVB-EK-PL 2 Deep, Welded Plain vertical bracket 4SOB-EK 2 Deep, Welded 3 8 Offset vertical bracket 4SAB-EK 2 Deep, Welded Vertical bracket with barbed hooks Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4SVB3/4PL 2 2.0 (6) 3 4 -- (2) 2 8.0 25 (525-V 3 4) (2) 3 4 4SVB-EK-PL 2 2.0 (6) 2 -- (2) 2 8.0 25 (3)Eccentric KO (2)Eccentric KO 4SOB-EK 2 2.0 (6) 2 -- (2) 2 89.0 25 (3)Eccentric KO (2)Eccentric KO 4SAB-EK 2 2.0 (6) 2 -- (2) 2 (3)Eccentric KO (2)Eccentric KO 82.0 25 4SB-EK 2 2.0 (6) 2 -- (2) 2 78.0 25 (525-B 2) (3)Eccentric KO (2)Eccentric KO 4SB-EK 2 Deep, Welded Stud NL Bracket set flush with front of box Red Box available on FF36

FF6 4 Square Boxes - 2 8 Deep With Conduit Knockouts FF6 4SD-EK 2 8 Deep, Welded 4SD-3/4 2 8 Deep, Welded 4SD- 2 8 Deep, Welded Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4SDVB-EK-PL 2 8 Deep, Welded Plain vertical bracket set flush with front of box 4SD-EK 2 8 30.3 (8) 2 -- (2) 2 82.0 25 (4)Eccentric KO (2)Eccentric KO 4SD-3/4 2 8 30.3 (8) 3 4 -- (3) 2 84.0 25 (527 3 4) (2) 3 4 4SD- 2 8 30.3 (8) -- (3) 2 84.0 25 (527-) (2) 3 4 4SDVB-EK-PL 2 8 30.3 (6) 2 -- (2) 2 (3)Eccentric KO (2)Eccentric KO 04.0 25 4SD-SPL 2 8 30.3 (8) 2 -- (3) 2 85.0 25 (527-SPL) (4) 3 4 (2) 3 4 4SPD 2 8 30.3 (8) 2 -- (3) 2 84.0 25 (4) 3 4 (2) 3 4 4SD-SPL 2 8 Deep, Welded Red Box available on FF36 4SPD Plenum Box 2 8 Deep, Drawn Without any holes and with reset knockouts (Screws supplied with cover, catalog number 8465P)

FF7 4 Square Boxes with Ground Wire FF7. Provided with ground screw and 0 long No. 2 AWG solid, insulated ground wire. 4SEKP 2 Deep, Welded 4S-SPL-DRP 2 Deep, Drawn 4SVB-EK-PLP 2 Deep, Welded Plain vertical bracket 4SD-EKP 2 8 Deep, Welded 4SDVB-EK-PLP 2 8 Deep, Welded Plain vertical bracket set flush with front of box 4SD-SPLP 2 8 Deep, Welded 4SRVB-EK-PLP 2 Deep, Welded Plain vertical bracket 4SX-EKP 2 Deep, Welded Number Depth (inches) Cubic Inch Capacity Type Clamp Knockout Description Sides Ends Bottom Wt. Lbs. Per 00 With Conduit Knockouts 4SEKP 2 2.0 -- (8) 2 -- (2) 2 72.0 50 (4)Eccentric KO (2)Eccentric KO 4S-SPL-DRP 2 2.0 -- (8) 2 -- (3) 2 73.0 50 (4) 3 4 (2) 3 4 4SVB-EK-PLP 2 8 30.3 -- (6) 2 -- (2) 2 04.0 25 (3)Eccentric KO (2)Eccentric KO 4SD-EKP 2 8 30.3 -- (8) 2 -- (2) 2 82.0 25 (4)Eccentric KO (2)Eccentric KO 4SDVB-EK-PLP 2 8 30.3 -- (6) 2 -- (2) 2 (3)Eccentric KO (2)Eccentric KO 04.0 25 4SD-SPLP 2 8 30.3 -- (8) 2 -- (3) 2 85.0 25 (4) 3 4 (2) 3 4 With Nonmetallic Sheathed Cable Clamps 4SRVB-EK-PLP 2 2.0 CL-26 (2) 2 (4) 2 32 () 2 84.0 25 ()Eccentric KO With Armored Cable / Metallic Clad Cable Clamps 4SX-EKP 2 2.0 CL-3 (4) 2 (4) 2 32 ( ) 2 00.0 25 (2)Eccentric KO Std. Pkg.

FF8 4 Square Boxes With Nonmetallic Sheathed Cable Clamps FF8 4SR-EK 2 Deep, Welded Nail holes 4SRB-EK 2 Deep, Welded Stud NL Bracket set flush with front of box 4SRVB-EK-PL 2 Deep, Welded Plain vertical bracket 4SROB-EK 2 Deep, Welded 3 8 offset vertical bracket set flush with front of box 4SRAB-EK 8 Deep, Welded Vertical bracket with barbed hooks 4SRD 2 8 Deep, Drawn Nail holes 4SRDVB-PL 2 8 Deep, Drawn Plain vertical bracket flush with front of box Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 4SR-EK 2 2.0 CL-26 (4) 2 (4) 2 32 () 2 74.0 25 (2)Eccentric KO 4SRB-EK 2 2.0 CL-26 (2) 2 (4) 2 32 () 2 88.0 25 ()Eccentric KO 4SRVB-EK-PL 2 2.0 CL-26 (2) 2 (4) 2 32 () 2 84.0 25 ()Eccentric KO 4SROB-EK 2 2.0 CL-26 (2) 2 (4) 2 32 () 2 94.0 25 ()Eccentric KO 4SRAB-EK 2 2.0 CL-26 (2) 2 (4) 2 32 () 2 88.0 25 ()Eccentric KO 4SRD 2 8 30.3 CL-26 (6) 2 (4) 2 32 () 2 90.0 25 4SRDVB-PL 2 8 30.3 CL-26 (3) 2 (4) 2 32 () 2 00.0 25

FF9 4 Square Boxes With Armored Cable / Metal Clad Cable / Flexible Metal Conduit Clamps FF9 4SX-EK 2 Deep, Welded 4SXAB-EK 2 Deep, Welded Vertical bracket with barbed hooks 4SXVB-EK-PL 2 Deep, Welded Plain vertical bracket 4SXB-EK-PL 2 Deep, Welded Plain NL bracket set flush with front of box 4SXD 2 8 Deep, Drawn 4SXDVB-PL 2 8 Deep, Drawn Plain vertical bracket set flush with front of box Depth Number Cubic Inch Type Knockout Description Wt. Lbs. Std. (inches) (Universal No.) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 4SX-EK 2 2.0 CL-3 (4) 2 (4) 2 32 () 2 00.0 25 (525VB) (2)Eccentric KO 4SXAB-EK 2 2.0 CL-3 (2) 2 (4) 2 32 () 2 00.0 25 (525VB) ()Eccentric KO 4SXVB-EK-PL 2 2.0 CL-3 (2) 2 (4) 2 32 () 2 4.0 25 ()Eccentric KO 4SXB-EK-PL 2 2.0 CL-3 (2) 2 (4) 2 32 () 2 6.0 25 ()Eccentric KO 4SXD 2 8 30.3 CL-3 (6) 2 (4) 2 32 () 2 00.0 25 4SXDVB-PL 2 8 30.3 CL-3 (3) 2 (4) 2 32 () 2 4.0 25

FF20 4 Square Boxes with Snap-In Brackets For 2 /2 and 3 5 /8 Metal Studs FF20 4S/2-SB2-/2 2 Deep, Welded For 2 2 metal stud 4S/2-SB3-5/8 2 Deep, Welded For 3 5 8 metal stud 4S-SPL-SB2-/2 2 Deep, Welded For 2 2 metal stud 4S-SPL-SB3-5/8 2 Deep, Welded For 3 5 8 metal stud 4SR-SB2-/2 2 Deep, Welded For 2 2 metal stud 4SR-SB3-5/8 2 Deep, Welded For 3 5 8 metal stud 4SX-SB2-/2 2 Deep, Welded For 2 2 metal stud 4SX-SB3-5/8 2 Deep, Welded For 3 5 8 metal stud Stud Depth Size Cubic Inch Type Knockout Description Wt. Lbs. Std. Number (inches) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. With Conduit Knockouts 4S/2-SB2-/2 2 2 2 2.0 -- (9) 2 -- (5) 2 92.0 25 4S/2-SB3-5/8 2 3 5 8 2.0 -- (9) 2 -- (5) 2 02.0 25 4S-SPL-SB2-/2 2 2 2 2.0 -- (6) 2 -- (3) 2 92.0 25 (3) 3 4 (2) 3 4 4S-SPL-SB3-5/8 2 3 5 8 2.0 -- (6) 2 -- (3) 2 02.0 25 (3) 3 4 (2) 3 4 With Nonmetallic Sheathed Cable Clamps 4SR-SB2-/2 2 2 2 2.0 CL-26 (3) 2 (4) 2 32 () 2 93.0 25 4SR-SB3-5/8 2 3 5 8 2.0 CL-26 (3) 2 (4) 2 32 () 2 03.0 25 With Armored Cable/Metal Clad Cable Clamps 4SX-SB2-/2 2 2 2 2.0 CL-3 (3) 2 (4) 2 32 () 2 9.0 25 4SX-SB3-5/8 2 3 5 8 2.0 CL-3 (3) 2 (4) 2 32 () 2 29.0 25

FF2 4 Square Box Extension Rings and Thru-Ring With Conduit Knockouts FF2 4SE-/2 Extension Ring 2 Deep, Drawn Top: Two 8-32 screws Bottom: Two slide-on slots 4SE-3/4 Extension Ring 2 Deep, Drawn Top: Two 8-32 screws Bottom: Two slide-on slots 4SSBE-SPL Extension Ring 2 Deep, Welded Top: Two 8-32 screws Bottom: Cutout for switch or handy box 4SES Combo Extension-Thru-Ring 2 Deep, Drawn Top: Two 8-32 screws Bottom: Two 8-32 screws and two slide-on slots Number Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 4SE-/2 2 2.0 -- (2) 2 -- -- 44.0 50 4SE-3/4 2 2.0 -- (8) 3 4 -- -- 44.0 50 (535 3 4) 4SSBE-SPL 2 2.0 -- (8) 2 -- -- 64.0 50 (4) 3 4 4SES 2 2.0 -- (6) 2 -- -- 47.0 50 (535 2) (4) 3 4 Red Box available on FF37 4 Square Covers Raised Surface Covers 8360 836 8362 Number Depth Cubic Inch WT. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. 8360 2 7.0 Blank 45.0 25 836 2 7.0 One Toggle Switch 44.0 25 (52-T) 8362 2 7.0 One GFCI Device 35.0 25 8363 2 7.0 One Single 40.0 25 Flush Receptacle 3 32 D 8364 2 7.0 Two Single Flush 38.0 25 Receptacles 3 32 D 8363 3 32 Opening 8364 3 32 Openings

FF22 4 Square Covers Raised Surface Covers FF22 8365N 8367 8368 3 32 Opening 837N 8373N 8374 8375N 8377 2 9 64 Opening 8378 2 2 Opening 8379 9 32 Opening Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. 8365N 2 7.0 One Duplex Flush Receptacle* 36.0 25 8367 2 7.0 Two Toggle Switches 42.0 25 (52-2T) 8368 2 7.0 One Toggle Switch, 39.0 25 One Single Flush Receptacle 3 32 D 837N 2 7.0 Two Duplex Flush Receptacles* 33.0 25 8373N 2 7.0 One Duplex Flush, One GFCI Device* 32.0 25 8374 2 7.0 One Toggle Switch, One GFCI Device 38.0 25 8375N 2 7.0 One Toggle Switch, One Duplex Flush* 38.0 25 8377 2 7.0 30-50A Single Flush Receptacle 2 9 64 D 36.0 25 8378 2 7.0 One Single Flush Receptacle 2 2 D 35.0 25 8379 2 7.0 20A Twist Lock Receptacle 9 32 D 38.0 25 (52R54) *Extra mounting screws and nuts provided.

FF23 4 Square Covers Flat Covers and Single Device - Plaster Rings/Mud Rings FF23 8465 Blank 8474 2 KO 8465P Plenum box cover with gasket and screws 8468WB 4 Raised 8468F Flat 8468B 4 Raised 8468A 8468C 5 8 Raised 8468 3 4 Raised 8466A Raised Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. Flat Covers 8465 Flat -- Blank 32.0 50 (52C) 8474 Flat -- 2 KO 32.0 50 (52C6) 8465P Flat -- Blank Plenum Box Cover 35.0 50 Gasketed with Two Captive Screws 8466 4 Raised Single Device 8468WB 4.5 Single Device 22.0 50 (52C36) 8468F Flat 0 Single Device 2.0 50 (52C-0) 8468B 4 2.0 Single Device 23.0 25 (52C62) 8468A 2 3.5 Single Device - Drawn 28.0 25 (52C3) 8468C 5 8 4.5 Single Device - Drawn 28.0 50 (52C4-5 8) 8468 3 4 5.5 Single Device - Drawn 32.0 25 (52C4) 8466A 7.5 Single Device - Drawn 36.0 25 (52C5) 8466 4 9.5 Single Device - Drawn 40.0 25 (52C6) Red Box available on FF37

FF24 4 Square Covers Single Device - Ceiling Plaster Rings/Mud Rings FF24 846E 4 Raised 846A 846 5 8 Raised 846B 3 4 Raised 846C Raised 846D 4 Raised Number Depth Cubic Inch Wt. Lbs Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. 846E 4.5 Ears 2 3 4 C to C Open 22.0 50 (52C3-4) 846A 2 3.5 Ears 2 3 4 C to C Open 24.0 50 (52C3-2) 846 5 8 4.5 Ears 2 3 4 C to C Open 26.0 50 (52C) 846B 3 4 5.0 Ears 2 3 4 C to C Open 28.0 25 (52C3-3 4) 846C 7.0 Ears 2 3 4 C to C Open 54.0 50 (52C3-) 846D 4 9.0 Ears 2 3 4 C to C Open 73.0 25 (52C3-4)

FF25 4 Square Covers Double Device - Plaster Rings/Mud Rings FF25 8470F Flat 8470WB 4 Raised 8470B 4 Raised 8470A 8470C 5 8 Raised 8470 3 4 Raised 8469A Raised 8469B 4 Raised Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. 8470F Flat 0.0 Double Device 3.0 50 (52C-00) 8470WB 4 3.5 Double Device 7.0 50 (52C37) 8470B 4 3.0 Double Device 3.0 50 (52C20) 8470A 2 6.0 Double Device 20.0 50 (52C7) 8470C 5 8 8.0 Double Device 22.0 50 (52C8 5 8) 8470 3 4 9.0 Double Device 24.0 50 (52C8) 8469A 2.0 Double Device 30.0 25 (52C9) 8469B 4 5.0 Double Device 40.0 25 (52C2)

FF26 4 Square Tile Covers Single Device and Double Device - Plaster Rings/Mud Rings FF26 846-50 846-75 3 4 Raised 846-00 Raised 846-25 4 Raised 846-50 846-200 2 Raised 847-50 847-75 3 4 Raised Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. Single Device 846-50 2 3.5 Single Device 30.0 25 (52C49-2) 846-75 3 4 5.8 Single Device 35.0 25 (52C49-3 4) 846-00 7.5 Single Device 40.0 25 (52C49-) 846-25 4 9.3 Single Device 46.0 25 (52C49-4) 846-50 2.0 Single Device 52.0 25 (52C50-2) 846-200 2 4.8 Single Device 64.0 25 (52C5-2) Double Device 847-50 2 6.3 Double Device 24.0 25 (52C52-2) 847-75 3 4 9.0 Double Device 32.0 25 (52C52-3 4) 847-00 2.3 Double Device 38.0 25 (52C5-) 847-25 4 5.3 Double Device 45.0 25 (52C52-4) 847-50 2 8.3 Double Device 52.0 25 (52C53-2) 847-200 2 24.0 Double Device 68.0 25 (52C54-2) 847-00 Raised 847-50 847-25 4 Raised 847-200 2 Raised

FF27 4 6 Square Boxes With Conduit Knockouts FF27 4SJ-3/4 2 Deep, Welded 4SJ-EK 2 Deep, Welded 4SJD-3/4 2 8 Deep, Welded 4SJD-EK 2 8 Deep, Welded 4SJD-3/4-2 8 Deep, Welded 4SJD- 2 8 Deep, Welded 4SJD--/4 2 8 Deep, Welded 4SPJD Plenum Box 2 8 Deep, Drawn (Screws supplied with cover, catalog number 8487P) Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4SJ-3/4 2 29.5 (8) 3 4 -- (2) 2 87.0 25 (725-3 4) (2) 3 4 4SJ-EK 2 29.5 (0)Eccentric KO -- () 2 88.0 25 (725-SPL) () 3 4 (2)Eccentric KO 4SJD-3/4 2 8 42.0 (0) 3 4 -- (2) 2 04.0 25 (727-3 4) (2) 3 4 4SJD-EK 2 8 42.0 (2)Eccentric KO -- () 2 04.0 25 (727-SPL) () 3 4 (2)Eccentric KO 4SJD-3/4-2 8 42.0 (4) 3 4 -- (2) 2 08.0 25 (727-3 4--SPL) (4) (2) 3 4 4SJD- 2 8 42.0 (8) -- (2) 2 97.0 25 (727-) (2) 3 4 4SJD--/4 2 8 42.0 (6) 4 -- (2) 2 06.0 25 (727-4) (2) 3 4 4SPJD 2 8 42.0 (4) 2 -- (3) 2 08.0 25 (6) 3 4 (2) 3 4 Red Box available on FF37

FF28 FF28 4 6 Square Boxes with Ground Wire With Conduit Knockouts. Provided with ground screw and 0 long No. 2 AWG solid, insulated ground wire. 4SJ-EKP 2 Deep, Welded 4SJD-EKP 2 8 Deep, Welded Number Depth (inches) Cubic Inch Capacity Knockout Description Sides Ends Bottom Wt. Lbs. Per 00 Std. Pkg. 4SJ-EKP 2 29.5 (0)Eccentric KO -- () 2 88.0 25 () 3 4 (2)Eccentric KO 4SJD-EKP 2 8 42.0 (2)Eccentric KO -- () 2 04.0 25 () 3 4 (2)Eccentric KO

FF29 4 6 Square Boxes With Conduit Knockouts FF29 4SJD-EK-VB 2 8 Deep, Welded Offset vertical bracket flush with front of box 4SJD--VB 2 8 Deep, Welded Offset vertical bracket flush with front of box Groundskeeper Raised ground feature on boss inside box provides two #0-32 tapped hole, allowing a 3/8 long green ground screw to be threaded into box without contacting mounting surface. Other boxes provided with flat ground tapped hole, except Plenum Boxes. See FF page 60 for ground screws, pigtails and accessories. Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4SJD-EK-VB 2 8 42.0 (9)Eccentric KO -- () 2 24.0 25 () 3 4 (2)Eccentric KO 4SJD--VB 2 8 42.0 (6) -- (2) 2 24.0 25 (2) 3 4 4 6 Square Box Extension Rings With Conduit Knockouts 4SJDE-/2-3/4 2 8 Deep, Drawn 8-32 tapped holes and slide-on screw slots in bottom 4SJDE- 2 8 Deep, Drawn 8-32 tapped holes and slide-on screw slots in bottom Depth Cubic Inch Knockout Description Wt. Lbs. Std. Number (inches) Capacity Sides Ends Bottom Per 00 Pkg. 4SJDE-/2-3/4 2 8 42.0 (4) 2 -- -- 66.0 25 (6) 3 4 4SJDE- 2 8 42.0 (8) -- -- 66.0 25 Red Box available on FF38

FF30 4 6 Square Covers Raised Surface FF30 8484 8484A 8484BN 8489 8490 849N 8495 Depth Cubic Inch Wt. Lbs. Std. Number (inches) Capacity Description Per 00 Pkg. 8484 2 0.0 One GFCI Device 50.0 0 8484A 2 0.0 One Toggle Switch, One GFCI Device 50.0 0 8484BN 2 0.0 One Duplex Receptacle, One GFCI Device* 45.0 0 8489 2 0.0 One Toggle Switch 54.0 0 8490 2 0.0 Two Toggle Switches 54.0 0 849N 2 0.0 One Duplex Receptacle* 50.0 0 8495 2 0.0 Blank 55.0 0 *Extra mounting screws and nuts provided.

FF3 4 6 Square Covers Raised Surface FF3 8492N 8493N 8494 3 32 Opening 8496 9 32 Opening 8497 3 4 Opening 8498 2 5 32 Opening 8499 2 2 Opening Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. 8492N 2 0.0 Two Duplex Receptacles* 45.0 0 8493N 2 0.0 One Toggle Switch, One Duplex Receptacle* 50.0 0 8494 2 0.0 Single Receptacle 3 32 D 54.0 0 8496 2 0.0 Single Receptacle 9 32 D 54.0 0 8497 2 0.0 Twist Lock Receptacle 3 4 D 5.0 0 8498 2 0.0 Single Receptacle 2 5 32 D 54.0 0 8499 2 0.0 Single Receptacle 2 2 D 54.0 0 *Extra mounting screws and nuts provided.

FF32 4 6 Square Covers Flat and Single Device - Ceiling Plaster Rings/Mud Rings FF32 8487 Flat 8487K Flat 8487P Plenum box cover with gasket and screws 8488A 8488B 5 8 Raised 8488C 3 4 Raised 8488D Raised 8488E 4 Raised Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. 8487 Flat - Blank 42.0 50 (72C) 8487K Flat - One 2 Knockout 43.0 50 (72C6) 8487P Flat - Blank Plenum Box Cover 48.0 50 Gasketed with Four Captive Screws Single Device 8488A 2 3.0 Ears 2 3 4 C to C 36.0 25 8488B 5 8 4.0 Ears 2 3 4 C to C 42.0 25 8488C 3 4 5.0 Ears 2 3 4 C to C 48.0 25 8488D 7.0 Ears 2 3 4 C to C 60.0 25 8488E 4 9.0 Ears 2 3 4 C to C 72.0 25 Red Box available on FF39

FF33 4 6 Square Covers Single Device - Plaster Rings/Mud Rings FF33 8485B 4 Raised 8485A 8485C 5 8 Raised 8485 3 4 Raised 8485D Raised 8485E 4 Raised Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. 8485B 4 2.5 Single Device 34.0 25 8485A 2 4.0 Single Device 38.0 25 (72C3) 8485C 5 8 4.8 Single Device 39.0 25 8485 3 4 5.5 Single Device 40.0 25 (72C4) 8485D 6.3 Single Device 45.0 0 8485E 4 8.0 Single Device 50.0 0

FF34 4 6 Square Covers Double Device - Plaster Rings/Mud Rings FF34 8486F Flat 8486B 4 Raised 8486A 8486C 5 8 Raised 8486 3 4 Raised 8486D Raised 8486E 4 Raised Number Depth Cubic Inch Wt. Lbs. Std. (Universal No.) (inches) Capacity Description Per 00 Pkg. 8486F Flat 0.0 Double Devices.0 25 8486B 4 2.8 Double Devices 2.0 25 8486A 2 7.5 Double Devices 30.0 25 (72C7) 8486C 5 8 6.8 Double Devices 32.0 25 8486 3 4 8.5 Double Devices 36.0 25 8486D.3 Double Devices 40.0 0 8486E 4 3.5 Double Devices 50.0 0

FF35 FF35 4 6 Square Tile Covers Single Device and Double Device - Plaster Rings/Mud Rings 856-00 Raised 856-25 4 Raised 856-50 856-200 2 Raised 857-00 Raised 857-50 857-200 2 Raised Depth Cubic Inch Wt. Lbs. Std. Number (inches) Capacity Description Per 00 Pkg. Single Device 856-00 6.8 Single Device 42.0 0 856-25 4 9.5 Single Device 48.0 0 856-50 2.3 Single Device 54.0 0 856-200 2 5.0 Single Device 66.0 0 Double Device 857-00 2.5 Double Devices 40.0 0 857-50 2 8.8 Double Devices 54.0 0 857-200 2 24.5 Double Devices 70.0 0

FF36 FF36 4 Square Boxes Red With Conduit Knockouts For fi re alarm circuits. Red powder coat fi nish. 4S-/2RD 2 Deep, Welded 4S-SPL-DRRD 2 Deep, Drawn 4SVB-EK-PLRD 2 Deep, Welded Plain vertical bracket 4SD-EKRD 2 8 Deep, Welded 4SDVB-EK-PLRD 2 8 Deep, Welded Plain vertical bracket set flush with front of box 4SD-SPLRD 2 8 Deep, Welded Number Depth (inches) Cubic Inch Capacity Knockout Description Sides Ends Bottom Wt. Lbs. Per 00 Std. Pkg. 4S-/2RD 2 2.0 (2) 2 -- (4) 2 73.0 50 4S-SPL-DRRD 2 2.0 (8) 2 -- (3) 2 73.0 50 (4) 3 4 (2) 3 4 4SVB-EK-PLRD 2 2.0 (6) 2 -- (3) 2 8.0 25 (3)Eccentric KO (2)Eccentric KO 4SD-EKRD 2 8 30.3 (8) 2 -- (3) 2 82.0 25 (4)Eccentric KO (2)Eccentric KO 4SDVB-EK-PLRD 2 8 30.3 (6) 2 -- (3) 2 (3)Eccentric KO (2)Eccentric KO 04.0 25 4SD-SPLRD 2 8 30.3 (8) 2 -- (3) 2 85.0 25 (4) 3 4 (2) 3 4

FF37 FF37 4 Square Box Extension Rings and Thru-Ring Red With Conduit Knockouts For fi re alarm circuits. Red powder coat fi nish. 4SSBE-SPLRD Extension Ring 2 Deep, Welded; Top: Two 8-32 screws Bottom: Cutout for switch or handy box 4SESRD Combo Extension-Thru-Ring 2 Deep, Drawn; Top: Two 8-32 screws Bottom: Two 8-32 screws and two slide-on slots Number Depth Cubic Knockout Description Wt. Lbs. Std. Type Clamp (inches) Inch Capacity Sides Ends Bottom Per 00 Pkg. 4SSBE-SPLRD 2 2.0 -- (8) 2 -- -- 64.0 50 (4) 3 4 4SESRD 2 2.0 -- (6) 2 -- -- 47.0 50 (4) 3 4 4 Square Flat Cover Red Flat Cover For fi re alarm circuits. Red powder coat fi nish. Number Depth (inches) Cubic Inch Capacity Description Wt. Lbs. Per 00 Std. Pkg. 8465RD Blank 8465RD Flat -- Blank 32.0 50

FF38 FF38 4 6 Square Boxes Red With Conduit Knockouts For fi re alarm circuits. Red powder coat fi nish. 4SJD-EKRD 2 8 Deep, Welded Number Depth (inches) Cubic Inch Capacity Knockout Description Sides Ends Bottom Wt. Lbs. Per 00 Std. Pkg. 4SJD-EKRD 2 8 42.0 (2)Eccentric KO -- () 2 04.0 25 () 3 4 (2)Eccentric KO 4 6 Square Box Extension Rings Red With Conduit Knockouts For fi re alarm circuits. Red powder coat fi nish. 4SJDE-/2-3/4RD 2 8 Deep, Drawn 8-32 tapped holes and slide-on screw slots in bottom Number Depth (inches) Cubic Inch Capacity Knockout Description Sides Ends Bottom Wt. Lbs. Per 00 Std. Pkg. 4SJDE-/2-3/4RD 2 8 42.0 (4) 2 -- -- 66.0 25 (6) 3 4

FF39 FF39 4 6 Square Covers Red Flat Cover For fi re alarm circuits. Red powder coat fi nish. Number Depth (inches) Cubic Inch Capacity Description Wt. Lbs. Per 00 8487RD Flat - Blank 42.0 50 Std. Pkg. 8487RD Flat

FF40 Handy Boxes 3 3 /4 x /2 and 4 x 2 /8 with Conduit Knockouts FF40 4SS 2 Deep, Drawn 4CSL-/2 4 Deep, Drawn 4SSLS-/2 2 Deep, Drawn 4CS-/2 7 8 Deep, Drawn 4CS-3/4 7 8 Deep, Drawn 4CSVB-/2 7 8 Deep, Drawn Plain vertical bracket set back 5 8 4CSX-/2PL 7 8 Deep, Drawn Plain vertical angle bracket set back 5 8 4SSL-/2 2 8 Deep, Welded 4SSL/2-DR 2 8 Deep, Drawn 4SSL-3/4 2 8 Deep, Welded Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. 3 3 /4 x /2 With Conduit Knockouts 4SS 2 7.0 (6) 2 (2) 2 (3) 2 34.0 50 4 x 2 /8 With Conduit Knockouts 4CSL-/2 4 9.5 (6) 2 (2) 2 (3) 2 39.0 50 (5836-2) 4SSLS-/2 2 0.3 (6) 2 (2) 2 (3) 2 46.0 50 (5835-2) 4CS-/2* 7 8 3.0 (6) 2 (2) 2 (2) 2 52.0 50 (5836-2) 4CS-3/4 7 8 3.0 (4) 3 4 (2) 3 4 () 3 4 49.0 50 (5836-3 4) 4CSVB-/2 7 8 3.0 (3) 2 (2) 2 (2) 2 65.0 50 (5836-V 2) 4CSX-/2PL 7 8 3.0 (3) 2 (2) 2 (3) 2 66.0 50 (5836-A 2) 4SSL-/2 2 8 4.5 (6) 2 (2) 2 (2) 2 54.0 50 (5837-2) 4SSL/2-DR 2 8 4.5 (6) 2 (2) 2 (2) 2 54.0 50 (5837-2) 4SSL-3/4 2 8 4.5 (4) 3 4 (2) 3 4 (2) 3 4 54.0 50 (5837-3 4) 4SSL3/4-DR 2 8 4.5 (4) 3 4 (2) 3 4 () 3 4 54.0 50 (5837-3 4) * Add suffix -C for CSA Certification 4SSL3/4-DR 2 8 Deep, Drawn

FF4 Handy Boxes 4 x 2 /8 with Conduit Knockouts FF4 4SSLVB-/2 2 8 Deep, Welded Plain vertical bracket set back 3 4 4SSLX-/2PL 2 8 Deep, Welded Plain vertical angle bracket set back 5 8 4SSLD-/2 2 2 Deep, Drawn 4SSLE-/2 2 Deep, Drawn 4CSE/2 7 8 Deep, Drawn Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. With Conduit Knockouts 4SSLVB-/2 2 8 4.5 (3) 2 (2) 2 (2) 2 74.0 50 (5837-F 2) 4SSLX-/2PL 2 8 4.5 (3) 2 (2) 2 (2) 2 7.0 50 4SSLD-/2 2 2 8.3 (6) 2 (2) 2 (3) 2 63.0 50 (5835-2) Extension Ring for 4 x 2 /8 Handy Box with Conduit Knockouts 4SSLE-/2 2 0.3 (6) 2 (2) 2 -- 36.0 50 (5935) With Slide on 4CSE/2 7 8 3.0 (6) 2 (2) 2 -- 48.0 50 (5936-2) With Slide on

FF42 Handy Boxes 4 Solid Gang with Conduit Knockouts FF42 33APFB-/2 2 2 Deep, Drawn Three Gang - 5 7 6 Wide Plain offset side combination Bracket set back 2 34APFB-/2 2 2 Deep, Drawn Four Gang - 7 3 8 Wide Plain offset side combination Bracket set back 2 Knockout Description Number Depth (Inches) Cubic Inch Capacity Sides Ends Bottom Wt. Lbs. Per 00 Std. Pkg. 33APFB-/2 2 2 46.5 (2)Concentric KO (6)Concentric KO (6)Concentric KO 49.0 20 34APFB-/2 2 2 67.0 (2)Concentric KO (8)Concentric KO (8)Concentric KO 72.0 20 Handy Boxes 4 /8 x 2 3 /8 with Conduit Knockouts 80-/2 3 4 Deep, Drawn 8-/2 2 4 Deep, Drawn 84E 2 Deep, Drawn Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. With Conduit Knockouts 80-/2 3 4 5.0 (6) 2 (2) 2 (2) 2 54.0 50 (6836-2) 8-/2 2 4 8.3 (6) 2 (2) 2 (2) 2 60.0 50 (6837-2) Extension Ring for 4 8 x 2 3 8 Handy Box with Conduit Knockouts 84E 2 3.5 (6) 2 (2) 2 -- 39.0 50 (6935) With Slide on

FF43 FF43 Handy Box Covers For 3 3 /4 x /2, 4 x 2 /8 and 4 /8 x 2 3 /8 Boxes Number Wt. Lbs. Ctn. Std. (Universal No.) Description Per 00 Qty. Pkg. For 3 3 4 x 2 4SS Box 2520 Blank 2.0 50 00 (48C) 2520 Number Wt. Lbs. Ctn. Std. (Universal No.) Description Per 00 Qty. Pkg. For 4 x 2 8 Boxes 2540 Blank.0 25 00 (58C) 2555 One /2 Knockout 8.0 25 00 (58C6) 2538 Single Receptacle 9 32 D 0.0 25 00 (58C4) 2540 2555 2538 2539 Single Receptacle 3 32 D 0.0 25 00 (58C5) 250 Duplex Receptacle 8.0 25 00 (58C7) 2594 One Toggle Switch 0.0 25 00 (58C30) 2539 250 2594 Number Wt. Lbs. Ctn. Std. (Universal No.) Description Per 00 Qty. Pkg. For 4 8 x 2 3 8 Boxes 80A Blank 3.0 25 00 (68C-) 80T One Toggle Switch 2.0 25 00 (68C-30) 80G GFI Receptacle 9.0 25 00 80A 80T 80G 80W Duplex Receptacle 9.0 25 00 (68C-7) 80X Single Receptacle 3 32 D 0.0 25 00 (68C-5) 80W 80X

FF44 4 Octagon Concrete Boxes* With /2 and 3 /4 Single Row Conduit Knockouts FF44 OCR2 OCR2-/2 OCR3 OCR3-/2 OCR4 Number Depth Cubic Inch Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Capacity Sides Ends Bottom Per 00 Pkg. OCR2 2 25.0 (4) 2 -- -- 52.0 25 (5453) (4) 3 4 OCR2-/2 2 2 3.0 (4) 2 -- -- 70.0 25 (5454) (4) 3 4 OCR3 3 37.0 (4) 2 -- -- 83.0 25 (5455) (4) 3 4 OCR3-/2 3 2 43.0 (4) 2 -- -- 00.0 25 (5456) (4) 3 4 OCR4 4 49.0 (4) 2 -- -- 3.0 25 (5457) (4) 3 4 Not rated for ceiling fan usage. 4 Octagon Back Plates No Stud and with 3 /8 Fixture Stud Number Depth Knockout Description Wt. Lbs. Std. (Universal No.) (inches) Sides Ends Bottom Per 00 Pkg. No Stud OCP Flat -- -- (3) 2 30.0 50 (5472) (2) 3 4 OCP No stud OCP-3/8 3 8 Fixture stud With 3/8 Fixture Stud OCP-3/8 Flat -- -- (2) 2 29.0 25 (5477) (2) 3 4 Material is 4 gauge galvanized steel. *Rings furnished with screws for back plates. Back plate mounting holes are designed to slide onto ring screws.

FF45 Adjustable Bar Hangers With Slide-on Clip/ With Slide-on Stud FF45 SX8 Clip SX26 Clip SX5 Stud SX60 Stud Wt. Lbs. Std. Number Description Per 00 Pkg. With Slide-on Clip SX8 Use between 4, 6, 8 and 20 joists 34.0 50 SX26 Use between 8, 20, 22, 24 and 26 joists OC. 50.0 50 With Slide-on Stud SX5 Use between 4, 6, 8 and 20 joists OC. 42.0 50 SX60 Use between 8, 20, 22, 24 and 26 joists OC. 52.0 50 Not rated for ceiling fan usage.

FF46 3 x 2 Square Corner Switch Boxes With Conduit Knockouts FF46 94 2 Deep, Welded Plaster ears* 2 Deep, Gangable Plaster ears* HB 2 Deep, Gangable Loxbox support on each side Plaster ears* LE 2 Deep, Gangable Four nail holes each side side leveling bosses 222 2 2 Deep, Gangable Plaster ears* 222-OW 2 2 Deep, Gangable Old work-support clamps Plaster ears* 225 2 2 Deep, Gangable Plaster ears* 222LE 2 2 Deep, Gangable Four nail holes each side side leveling bosses 222NL 2 2 Deep, Gangable Stud NL bracket set back 2 222VB-PL 2 2 Deep, Gangable Plain vertical bracket set back 3 4 Depth Cubic Inch Knockout Description Wt. Lbs. Std. Number (inches) Capacity Sides Ends Bottom Per 00 Pkg. 94* 2 Non-Gangable 7.5 (2) 2 () 2 40.0 50 * 2 Gangable 0.0 (4) 2 (2) 2 (2) 2 5.0 50 HB* 2 Gangable 0.0 (4) 2 (2) 2 (2) 2 54.0 50 LE 2 Gangable 0.0 (4) 2 (2) 2 (2) 2 47.0 50 222* 2 2 Gangable 2.5 (4) 2 (2) 2 () 2 58.0 50 222-OW* 2 2 Gangable 2.5 (4) 2 (2) 2 () 2 68.0 50 225* 2 2 Gangable 2.5 (4) 3 4 (2) 3 4 () 2 58.0 50 222LE 2 2 Gangable 2.5 (4) 2 (2) 2 () 2 56.0 50 222NL 2 2 Gangable 2.5 (4) 2 (2) 2 () 2 66.0 25 222VB-PL 2 2 Gangable 2.5 (2) 2 (2) 2 () 2 60.0 25 * Plaster ears support GFCI and decorative cover plates.

FF47 3 x 2 Square Corner Switch Boxes With Conduit Knockouts FF47 333 2 3 4 Deep, Gangable Plaster ears* 335 2 3 4 Deep, Gangable Plaster ears* 333LE 2 3 4 Deep, Gangable Two nail holes each side side leveling bosses 333VB 2 3 4 Deep, Gangable Plain vertical bracket set back 3 4 333D 3 2 Deep, Gangable Plaster ears* 336 3 2 Deep, Gangable Plaster ears* 333D-LE 3 2 Deep, Gangable Two nail holes each side Depth Cubic Inch Knockout Description Wt. Lbs. Std. Number (inches) Capacity Sides Ends Bottom Per 00 Pkg. 333* 2 3 4 Gangable 4.0 (4) 2 (2) 2 () 2 63.0 50 335* 2 3 4 Gangable 4.0 (4) 3 4 (2) 3 4 () 2 64.0 50 333LE 2 3 4 Gangable 4.0 (4) 2 (2) 2 () 2 60.0 50 333VB 2 3 4 Gangable 4.0 (2) 2 (2) 2 () 2 67.0 50 333D* 3 2 Gangable 8.0 (4) 2 (4) 2 () 2 77.0 25 336* 3 2 Gangable 8.0 (4) 3 4 (4) 3 4 () 2 78.0 25 333D-LE 3 2 Gangable 8.0 (4) 2 (4) 2 () 2 74.0 25 * Plaster ears support GFCI and decorative cover plates.

FF48 FF48 3 3 4 x 2 Square Corner Switch Boxes With Conduit Knockouts Depth Cubic Inch Knockout Description Wt. Lbs. Std. Number (inches) Capacity Sides Ends Bottom Per 00 Pkg. SB 6.5 -- () 2 -- 37.0 25 (2) 2 32 SB Deep, Welded Plain flat vertical bracket perfect for remodeling 4 Square Corner Switch Boxes With Conduit Knockouts 32AP/2 2 8 Deep, Welded Two gang 32AP-SPL 2 8 Deep, Welded Two gang 32APFB-SPL 2 8 Deep, Welded Two gang plain vertical bracket Depth Cubic Inch Knockout Description Wt. Lbs. Std. Number (inches) Capacity Sides Ends Bottom Per 00 Pkg. 32AP/2 2 8 30.3 (6) 2 (6) 2 (5) 2 88.0 25 32AP-SPL 2 8 30.3 (4) 2 (4) 2 (3) 2 88.0 25 (2) 3 4 (2) 3 4 (2) 3 4 32APFB-SPL 2 8 30.3 (2) 2 (2) 2 (3) 2 00.0 25 () 3 4 (4) 3 4 (2) 3 4

FF49 FF49 3 x 2 Bevel Corner Switch Boxes 2 4 Deep With Nonmetallic Sheathed Cable Clamps 388LE-OR-44LE 2 4 Deep, Gangable External nail brackets leveling bosses 388LR-OR-44LR 2 4 Deep, Gangable external nail brackets leveling bosses Plaster ears* 388-OR-44 2 4 Deep, Gangable external nail brackets Plaster ears* 388HB 2 4 Deep, Gangable Loxbox support welded on each side Plaster ears* 388VB-OR-44VB 2 4 Deep, Gangable Plain vertical bracket set back 3 4 388DW 2 4 Deep, Gangable Stud NL bracket set back 4 388NL-OR-44NL 2 4 Deep, Gangable Stud NL bracket set back 2 388LES 2 4 Deep, Gangable, Welded External nail brackets leveling bosses Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. Number (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 388LE-OR-44LE 2 4 0.5 CL-20 -- (4) 2 32 () 2 52.0 50 Gangable 388LR-OR-44LR* 2 4 0.5 CL-20 -- (4) 2 32 () 2 56.0 50 Gangable 388-OR-44* 2 4 0.5 CL-20 -- (4) 2 32 () 2 56.0 50 Gangable 388HB* 2 4 0.5 CL-20 -- (4) 2 32 () 2 60.0 50 Gangable 388VB-OR-44VB 2 4 0.5 CL-20 -- (4) 2 32 () 2 64.0 50 Gangable 388DW 2 4 0.5 CL-20 -- (4) 2 32 () 2 62.0 50 Gangable 388NL-OR-44NL 2 4 0.5 CL-20 -- (4) 2 32 () 2 62.0 50 Gangable 388LES 2 4 0.5 CL-20 -- (4) 2 32 () 2 52.0 50 Non-Gangable 388LESN 2 4 0.5 CL-20 -- (4) 2 32 () 2 56.0 50 Non-Gangable 388VB-PL2G 2 4 2.0 CL-20 -- (8) 2 32 (2) 2 84.0 25 Welded Assembly * Plaster ears support GFCI and decorative cover plates. 388LESN 2 4 Deep, Welded Two 6 penny nails in external brackets leveling bosses 388VB-PL2G 2 4 Deep, Welded Plain vertical bracket set back 3 4

FF50 FF50 3 x 2 Square Corner Switch Boxes With Nonmetallic Sheathed Cable Clamps 95 2 Deep, Welded Plaster ears* 383 2 Deep, Gangable Plaster ears* 384 2 2 Deep, Gangable Plaster ears* 384LR 2 2 Deep, Gangable Leveling bosses Plaster ears* 384LE 2 2 Deep, Gangable Two nail holes each side leveling bosses 384-OW 2 2 Deep, Gangable Old work support clamps Plaster ears* 384NL 2 2 Deep, Gangable Stud NL bracket set back 2 384DW-PL 2 2 Deep, Gangable Stud NL bracket set back 4 Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. Number (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 95 2 Non-Gangable 7.5 CL-26 -- (4) 2 32 -- 44.0 50 383* 2 Gangable 0.0 CL-26 -- (4) 2 32 () 2 53.0 50 384* 2 2 Gangable 2.5 CL-26 -- (2) 2 () 2 62.0 50 (4) 2 32 384LR* 2 2 Gangable 2.5 CL-26 -- (2) 2 () 2 63.0 50 (4) 2 32 384LE 2 2 Gangable 2.5 CL-26 -- (2) 2 () 2 60.0 50 (4) 2 32 384-OW* 2 2 Gangable 2.5 CL-26 (4) 2 (2) 2 () 2 68.0 50 (4) 2 32 384NL 2 2 Gangable 2.5 CL-26 -- (2) 2 () 2 70.0 25 (4) 2 32 384DW-PL 2 2 Gangable 2.5 CL-26 -- (2) 2 () 2 72.0 25 (4) 2 32 384VB-PL 2 2 Deep, Gangable Bracket set back 3 4 384VB-PL 2 2 Gangable 2.5 CL-26 -- (2) 2 () 2 63.0 50 (4) 2 32 * Plaster ears support GFCI and decorative cover plates.

FF5 FF5 3 x 2 Square Corner Switch Boxes With Nonmetallic Sheathed Cable Clamps 384LES-VB 2 2 Deep, Welded Plain vertical bracket set back 3 4 384LES 2 2 Deep, Welded Four nail holes each side 384VB-PL2G 2 2 Deep, Welded Plain vertical bracket set back 3 4 385-LES 2 2 Deep, Welded External nail brackets 385-LESN 2 2 Deep, Welded Two 6 penny nails in side 389 2 3 4 Deep, Gangable Plaster ears* 389VB 2 3 4 Deep, Deep, Gangable Plain vertical bracket set back 3 4 384D 3 2 Deep, Gangable Two nail holes each side Plaster ears* 384DLE 3 2 Deep, Gangable Two nail holes each side 384D-NL 3 2 Deep, Gangable Stud NL bracket set back 2 Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. Number (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 384LES-VB 2 2 2.5 CL-26 -- (2) 2 () 2 66.0 50 Non-Gangable (4) 2 32 384LES 2 2 2.5 CL-26 -- (2) 2 () 2 6.0 50 Non-Gangable (4) 2 32 384VB-PL2G 2 2 25.0 CL-26 -- (2) 2 (2) 2 97.0 25 Non-Gangable, Welded Assembly (8) 2 32 385-LES 2 2 2.5 CL-26 -- (2) 2 () 2 64.0 50 Non-Gangable (4) 2 32 385-LESN 2 2 2.5 CL-26 -- (2) 2 () 2 67.0 50 Non-Gangable (4) 2 32 389* 2 3 4 4.0 CL-26 (4) 2 (2) 2 () 2 68.0 50 Gangable (4) 2 32 389VB 2 3 4 4.0 CL-26 (2) 2 (2) 2 () 2 7.0 50 Gangable (4) 2 32 384D* 3 2 8.0 CL-26 (4) 2 (2) 2 () 2 82.0 25 Gangable (4) 2 32 384D-VBPL 3 2 Deep, Gangable Plain vertical bracket set back 3 4 384DLE 3 2 8.0 CL-26 (4) 2 (2) 2 () 2 79.0 25 Gangable (4) 2 32 384D-NL 3 2 8.0 CL-26 (4) 2 (2) 2 () 2 87.0 25 Gangable (4) 2 32 384D-VBPL 3 2 8.0 CL-26 (2) 2 (2) 2 () 2 86.0 25 Gangable (4) 2 32 * Plaster ears support GFCI and decorative cover plates.

FF52 FF52 3 x 2 Corner Switch Boxes With Ground Wire With Conduit Knockouts Provided with ground screw and 0 long No. 2 AWG solid, insulated ground wire. 384DP 3 2 Deep, Gangable Two nail holes each side, Plaster ears 384DLEP 3 2 Deep, Gangable Two nail holes each side 384D-VBPLP 3 2 Deep, Gangable Plain vertical bracket set back 3 4 Number Depth (inches) Cubic Inch Capacity Type Clamp Knockout Description Sides Ends Bottom Wt. Lbs. Per 00 384DP 3 2 Gangable 8.0 CL-26 (4) 2 (2) 2 () 2 82.0 25 (4) 2 32 384DLEP 3 2 Gangable 8.0 CL-26 (4) 2 (2) 2 () 2 79.0 25 (4) 2 32 384D-VBPLP 3 2 Gangable 8.0 CL-26 (2) 2 (2) 2 () 2 86.0 25 (4) 2 32 Std. Pkg.

FF53 FF53 3 x 2 8 Square Corner Switch Boxes With Nonmetallic Sheathed Cable Clamps 6LES 2 7 8 Deep, Welded External nail brackets 6LESN 2 7 8 Deep, Welded Two 6 penny nails in side Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. Number (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 6LES 2 7 8 6.0 CL-26 -- (2) 2 () 2 66.0 50 Non-Gangable (4) 2 32 6LESN 2 7 8 6.0 CL-26 -- (2) 2 () 2 69.0 50 Non-Gangable (4) 2 32 3 3 4 x 2 Square Corner Switch Boxes With Nonmetallic Sheathed Cable Clamps 6LE 2 2 Deep, Gangable Patented raised ground screw hole, external nail brackets, leveling bosses 6LE-VB 2 2 Deep, Gangable Patented raised ground screw hole bracket set back 3 4 8LES 2 7 8 Deep, Welded External nail brackets Depth Cubic Inch Type Knockout Description Wt. Lbs. Std. Number (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 6LE 2 2 6.0 CL-26 (4) 2 (2) 2 () 2 35.0 50 Gangable (4) 2 32 6LE-VB 2 2 6.0 CL-26 (2) 2 (2) 2 () 2 40.0 50 Gangable (4) 2 32 8LES 2 2 8.0 CL-26 (4) 2 (2) 2 () 2 2.0 50 Non-Gangable (4) 2 32

FF54 FF54 3 x 2 Square Corner Switch Boxes With Armored Cable/Metal Clad Cable/Flexible Metal Conduit Clamps 7F 2 Deep, Gangable Plaster ears* 73F 2 2 Deep, Gangable Plaster ears* 73FNL 2 2 Deep, Gangable Stud NL bracket set back 2 73FVB 2 2 Deep, Gangable Plain vertical bracket set back 3 4 73FHB 2 2 Deep, Gangable Lox Box supports Plaster ears* 74F 2 3 4 Deep, Gangable Plaster ears* 74FVB-PL 2 3 4 Deep, Gangable Plain vertical bracket set back 3 4 8LESNX 2 7 8 Deep, Welded Two lb penny nails in external brackets Depth Cubic Inch Type Knockout Description Wt. Lbs Std. Number (inches) Capacity Clamp Sides Ends Bottom Per 00 Pkg. 7F* 2 Gangable 0.7 CL-3 -- (4) 2 32 () 2 55.0 50 73F* 2 2 Gangable 2.5 CL-3 -- (2) 2 () 2 63.0 50 (4) 2 32 73FNL 2 2 Gangable 2.5 CL-3 -- (2) 2 () 2 70.0 25 (4) 2 32 73FVB 2 2 Gangable 2.5 CL-3 -- (2) 2 () 2 72.0 50 (4) 2 32 73FHB* 2 2 Gangable 2.5 CL-3 -- (2) 2 () 2 63.0 50 (4) 2 32 75F 3 2 Deep, Gangable Plaster ears* 74F* 2 3 4 Gangable 4.0 CL-3 (4) 2 (2) 2 () 2 70.0 50 (4) 2 32 74FVB-PL 2 3 4 Gangable 4.0 CL-3 (2) 2 (2) 2 () 2 72.0 50 (4) 2 32 8LESNX 2 7 8 Non-Gangable 8.0 CL-3 (4) 2 (2) 2 () 2 5.0 25 (4) 2 32 75F* 3 2 Gangable 8.0 CL-3 (4) 2 (2) 2 () 2 79.0 25 (4) 2 32 75FVB 3 2 Gangable 8.0 CL-3 (4) 2 (2) 2 () 2 86.0 50 (4) 2 32 * Plaster ears support GFCI and decorative cover plates. 75FVB 3 2 Deep, Gangable Plain vertical bracket set back 3 4

FF55 FF55 3 x 2 Square Corner Switch Boxes With Ground Wire With Armored Cable/Metal Clad Cable/Flexible Metal Conduit Clamps Provided with ground screw and 0 long No. 2 AWG solid, insulated ground wire. 75FP 3 2 Deep, Gangable Plaster ears* 75FVBP 3 2 Deep, Gangable Plain vertical bracket set back 3 4 Number Depth (inches) Cubic Inch Capacity Type Clamp Knockout Description Sides Ends Bottom Wt. Lbs. Per 00 75FP 3 2 Gangable 8.0 CL-3 (4) 2 (2) 2 () 2 79.0 25 (4) 2 32 75FVBP 3 2 Gangable 8.0 CL-3 (4) 2 (2) 2 () 2 86.0 25 (4) 2 32 Std. Pkg.

FF56 FF56 Multigang Switch Boxes 7 /8 Deep with Conduit Knockouts 2G5075S Two Gang 6 3 6 Wide, Welded 3G5075S Three Gang 8 5 8 Wide, Welded 4G5075S Four Gang 0 9 6 Wide, Welded 5G5075S Five Gang 2 5 6 Wide, Welded 6G5075S Six Gang 4 8 Wide, Welded 7G5075S Seven Gang 5 5 6 Wide, Welded 8G5075S Eight Gang 7 3 4 Wide, Welded Number Knockout Description Dimensions No. of Wt. Lbs. Cubic Inch W x H Gangs per 00 Capacity Sides Ends Bottom Std. Pkg. 2G5075S 6-7/8 x 4-9/6 56.3 2 (4) 2 (2) 2 (3) 2 7 5 (4)Eccentric (2)Eccentric (2) 3 4 3G5075S 8-3/4 x 4-9/6 65.0 3 (6) 2 (2) 2 (3) 2 54 5 (4)Eccentric (2)Eccentric (2) 3 4 4G5075S 0-9/6 x 4-9/6 80.0 4 (6) 2 (2) 2 (6) 2 82 5 (6)Eccentric (2)Eccentric (4) 3 4 5G5075S 2-5/6 x 4-9/6 94.8 5 (8) 2 (2) 2 (6) 2 205 (6)Eccentric (2)Eccentric (4) 3 4 6G5075S 4-/8 x 4-9/6. 6 (8) 2 (2) 2 (6) 2 227.5 (8)Eccentric (2)Eccentric (4) 3 4 7G5075S 5-5/6 x 4-9/6 27.0 7 (0) 2 (2) 2 (9) 2 290 (8)Eccentric (2)Eccentric (6) 3 4 8G5075S 7-3/4 x 4-9/6 42. 8 (0) 2 (2) 2 (9) 2 255 (0)Eccentric (2)Eccentric (6) 3 4

FF57 FF57 Multigang Switch Box Covers 3 /4 Raised Device Covers 2GC75N Two Gang 7 6 Wide 3GC75N Three Gang 8 7 8 Wide 4GC75N Four Gang 0 9 6 Wide 5GC75N Five Gang 2 5 6 Wide 6GC75N Six Gang 4 8 Wide 7GC75N Seven Gang 5 5 6 Wide 8GC75N Eight Gang 7 3 4 Wide Number Dimensions W x H Cubic Inch Capacity No. of Gangs Wt. Lbs. per 00 2GC75N 6 7 8 x 4 9 6 9. 2 57 5 3GC75N 8 3 4 x 4 9 6 4.9 3 70 5 4GC75N 0 9 6 x 4 9 6 2.0 4 76 5 5GC75N 2 5 6 x 4 9 6 25.5 5 83 6GC75N 4 8 x 4 9 6 30.8 6 92 7GC75N 5 5 6 x 4 9 6 36. 7 00 8GC75N 7 3 4 x 4 9 6 4. 8 5 Device covers will also fi t the next smaller size box. Std. Pkg. Low Voltage Partition For Multigang Switch Boxes Number Description Wt. Lbs. per 00 Std. Pkg. LVP-N 7 8 Partition for use with 3 4 Raised Covers. 6.5 25

FF58 Masonry Boxes 2 /2 Deep x 3 3 /4 High With Concentric Conduit Knockouts (Non-gangable) FF58 M-250 3 6 Wide, Welded Single gang M2-250 3 5 8 Wide, Welded Two gang M3-250 5 7 6 Wide, Welded Three gang M4-250 7 3 8 Wide, Welded Four gang LVP-250 Partition Width Cubic Inch Concentric Knockout Description Wt. Lbs. Std. Number (inches) Capacity Sides Ends Bottom Per 00 Pkg. M-250 3 6 5.5 (4) 2-3 4 (2) 2-3 4 (2) 2-3 4 66.0 25 M2-250 3 5 8 3.0 (4) 2-3 4 (4) 2-3 4 (4) 2-3 4 6.0 25 M3-250 5 7 6 46.5 (4) 2-3 4 (6) 2-3 4 (6) 2-3 4 40.0 0 M4-250 7 3 8 67.0 (4) 2-3 4 (8) 2-3 4 (4) 2-3 4 60.0 5 Low Voltage Partitions LVP-250 0.0 For 2 2 Two and Three Gang Masonry 6.0 00

FF59 Masonry Boxes 3 /2 Deep x 3 3 /4 High with Concentric Conduit Knockouts (Non-gangable) FF59 M-350 3 6 Wide, Welded Single gang M2-350 3 5 8 Wide, Welded Two gang M3-350 5 7 6 Wide, Welded Three gang M4-350 7 3 8 Wide, Welded Four gang LVP-350 Partition Width Cubic Inch Concentric Knockout Description Wt. Lbs. Std. Number (inches) Capacity Sides Ends Bottom Per 00 Pkg. M-350 3 6 22.0 (4) 2-3 4 (4) 2-3 4 (2) 2-3 4 86.0 25 M2-350 3 5 8 44.0 (4) 2-3 4 (8) 2-3 4 (4) 2-3 4 26.0 25 M3-350 5 7 6 66.0 (4) 2-3 4 (2) 2-3 4 (6) 2-3 4 63.0 0 M4-350 7 3 8 92.0 (4) 2-3 4 (6) 2-3 4 (4) 2-3 4 200.0 5 Low Voltage Partitions LVP-350 0.0 For 3 2 Two, Three and Four Gang 24.0 00 Masonry Boxes

FF60 Outlet Box/Switch Box Accessories FF60 MSC-OBN Outlet Box Metal stud clip 490 Switch Box Extension 892 LOX BOX Switch Box Supports 896 E-Z-IN Switch box supports Wt. Lbs. Ctn. Std. Number Description Per 00 Qty. Pkg. Outlet Box Metal Stud Clip MSC-OBN Mounts all types, sizes and depths of outlet boxes to any metal stud 5.9 -- 50 Switch Box Extension 490 Fits all single-gang switch boxes with 8 screws - 7 8 Depth -.0 -- 25 4.5 cubic inch wiring capacity Switch Box Supports 892 LOX BOX fi ts standard switch boxes - wall 4 minimum to 4 maximum 2.6 00 500 896* E-Z-IN wall 4 minimum to 4 maximum 2.6 00 000 * Used in pairs. GR2 Grounding clip SCR032-PTL0C Insulated Grounding screw and pigtail SCR032-PTL0B Bare Wire Grounding screw and pigtail SCR032 Grounding screw Wt. Lbs. Std. Number Description Per 00 Pkg. Grounding Clip GR2 For use with No. 4 or No. 2 non-metallic sheathed cable 0.4 000 having ground wire Washer Head Grounding Screws and Pigtails SCR032-PTL0C 3 8 long - 0-32 thread with 0 solid insulated, No. 2 AWG wire pigtail.80 000 SCR032-PTL0B 3 8 long - 0-32 thread with 0 solid bare wire, No. 4 AWG wire pigtail.20 000 SCR032 3 8 long - 0-32 thread green 0.50 000