WHEELED EXCAVATOR S2W MAX. OPERATING WEIGHT: MONO 2322kg (51151lbs) / TAB 23273kg (5138lbs) ENGINE POWER: 128kW (172hp) G E F S2W W S 2 I H S 2 W D C A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels 133 (4-4) B 253 (8-4) External width over dual wheels C Ground clearance 26 (-1) D Height to axle centre line dual wheels 515 (1-8) Height to axle centre line single wheels 556 (1-9) E Overall width (handrail removed) 25 (8-2) F Height over cab 325 (1-8) G Tail length 253 (8-3) H Clearance under counterweight 1335 (4-4) Monoboom 5.7m (18-8) Dipper length 1.91m (6-3) 2.4m (7-1) I Transport boom height mm (ft-in) 312 (1-2) 32 (1-6) 3.m (9-1) 35 (1-) Transport length mm (ft-in) 945 (31-) 945 (31-) 933 (3-7) 3.m (9-1) Triple articulated boom 5.63m (18-6) Dipper length 1.91m (6-3) 2.4m (7-1) I Transport boom height mm (ft-in) 332 (1-1) 34 (11-1) 37 (12-1) Transport length mm (ft-in) 9175 (3-1) 919 (3-1) 92 (3-2)
CHASSIS OPTIONS CHASSIS OPTIONS D E O M A B C Dimensions in millimetres (ft-in) A Centre of slew ring to front axle 157 (4-11) B Centre of slew ring to rear axle 125 (4-1) C Wheelbase 2757 (9-) D Length including rear stabilizers 435 (14-3) E Width over stabilizers (raised) 2523 (8-3) N K L Dimensions in millimetres (ft-in) K Centre of slew ring to front dozer blade (lowered) 276 (9-) L Length including stabilizers and dozer blade (raised) 56 (16-7) M Ground level to bottom of front dozer blade (raised) 45 (1-5) N Dozer blade dig depth 13 (-5) O Dozer blade height 6 (1-11) I T F G P Q S H R Dimensions in millimetres (ft-in) F Centre of slew ring to face of front tyre 247 (6-8) G Centre of slew ring to rear dozer blade (lowered) 2425 (7-11) H Length including rear dozer blade (raised) 447 (14-8) I Ground level to bottom of rear dozer blade (raised) 45 (1-4) Dozer blade width 253 (8-4) Dimensions in millimetres (ft-in) P Centre of slew ring to front stabilizers 2632 (8-7) Q Centre of slew ring to rear stabilizers 23 (7-6) R Length including front and rear stabilizers 4932 (16-2) S Width over stabilizers (lowered) 3765 (12-4) T Stabilizer lift height 21 (-7)
Type Rated power (ISO14899 (SAE 1995)) Piston displacement Starting system Batteries Alternator Drive train Swing brake Swing speed Swing gear Swing lock ENGINE Isuzu 4HK1X water cooled, 4-stroke, 4-cylinder in-line, direct injection, common rail turbocharged intercooled diesel. Stage III emissions compliant. 128kW (172hp) @ 2rpm 5.193 litres (1.14 UK gal). 24 volt. 2 x 12 volt Heavy Duty. 24 volt 5 amp. SWING SYSTEM Axial piston motor and planetary reduction final drive. Hydraulic braking plus automatic spring applied disc type parking brake. 1RPM Large diameter, internally toothed fully sealed grease bath lubricated. Multi position switchable brake and mechanical lock. CHASSIS Structure High strength section. Chassis Options: Dozer Blade Front and rear pin mount. Stabilisers Front or rear pin mount, independently operable plus combinations. Grab Stowage Heavy-duty, pin mounted stowage bar. Transmission Hydrostatic drive via piston motor and powershift transmission. Travel speed Creep speed 3kph (2mph) Low ratio 8kph (5mph) High ratio 3kph (19mph) Drawbar pull 99.4kN Axles Four wheel drive. Front steering axle oscillates for rough ground mobility. Axle load capacity 4 tonnes Axle oscillation +/- 8.5 degrees Ground clearance 335mm (1ft 1in) Steering Fully hydraulic system. Turning radius To outside of tyres 6.61m (21ft 8in) To outer edge of front mounted dozer blade 7.23m (23ft 9in) Brakes All hydraulic, dual circuit brake system. Parking Brake Built into the transmission. EXCAVATOR END Booms Bucket tipping links Monoboom or triple articulation boom with choice of dipper lengths to match the requirements of reach, lift capacity and tearout. Fabricated type with choice of max capacity lift and no-lift point with link stowage lock (grab work).
System MAIN HYDRAULIC SYSTEM Load-sensed hydraulic system with variable flow piston pump providing flow-on-demand for maximum efficiency. Main pump Variable displacement axial piston type Maximum flow 2 x 214 l/min (93 UK gpm) Main circuit pressure 343 bar (4879 lb/in 2 ) With power boost 372 bar (5395 lb/in 2 ) Servo pump Gear type Maximum flow 31 l/min (7 UK gpm) Servo pressure 4 bar (58 lb/in 2 ) Optional Circuits: Hammer Includes automatic engine speed setting and return filter. Maximum flow 2 l/min (44 UK gpm) Maximum pressure 314 (343) bar (4554/4975 lb/in 2 ) Hammer/auxiliary combined (pre-set to 18 bar) (261 lb/in 2 ) Bucket to grab operation Maximum flow 138 l/min (3 UK gpm) Maximum pressure for grab ram operation 33 (343) bar (4785/4975 lb/in 2 ) Low Flow Pipework Hydraulic Cylinders Filtration In tank Main return line Pilot line Plexus by pass line Hydraulic hammer return Two options available, one with 2L/min (4 UK gpm) flow and a second with an adjustable flow of 27-45L/min (6-1 UK gpm). With hardened, chromed piston rods and end cushioning on boom, dipper and bucket crowd cylinder. 15 micron, suction strainer. 1 micron, fibreform element. 1 micron, paper element. 1.5 micron paper element. 1 micron, reinforced microform element. Twins Singles TYRES 11. x 2 tyres (16PR) with spacer ring. 18R x 22.5 tyres (Radials). CAB Excellent digging, loading and positioning visibility results from the careful design of front, side and roof lights. All screens are tinted to improve in cab conditions. Fully opening front screen is very smooth to operate and as the lower screen is stored within the top screen frame it makes complete front screen opening easy, fast and convenient. Fresh air ventilation available from opening door window, opening slot in front screen and fully opening front screen. Parallelogram wash wiper for upper screen ensuring good wiped area for maximum visibility. Wiper motor is fitted in the left hand side of the roof screen so as not to affect bucket visibility when loading. Optional lower screen wiper available. Fresh air ventilation and heater with windscreen demister. Infinitely variable blower speed, temperature and recirculation control. Climate control. Fully adjustable deluxe suspension seat with arm rest adjustment and backrest recline. Radio with digital tuner fitted into the roof lining for maximum protection. Conveniently placed radio mute button incorporated into lower console. 12v power point and mobile phone holder built into the right hand console. Courtesy light can be operated from ground level and is illuminated for five minutes or until switched off improving operator access at night. Cab mounted roller blind protects operator from suns glare through front or top screens.
AMS ADVANCED MANAGEMENT SYSTEM STANDARD EXCAVATING BUCKETS Four selectable working modes link the operators control movements with the engine and hydraulic systems to maximise All buckets are CB Esco type fully welded steel, with sealed, hardened steel pivot pins and replaceable wear parts. productivity and efficiency. A (Auto) Up to 1% engine power and 1% flow. Gives variable power and speed depending on the Max Width mm (in.) Capacity (SAE heaped) cu.m (cu.yd) Weight kg (lb) operator s input, matching the demand for output and efficiency to the job. Power boost is 6 (24).4 (.52) 484 (167) automatically activated in this mode should hard conditions be encountered. Auto idle cuts in after a period of inactivity (between 5 and 3 seconds as set by the operator) 9 (36).71 (.93) 595 (1312) E (Economy) 8% engine power. 95% of hydraulic flow maximises economy while maintaining excellent output. 1 (4).81 (1.6) 627 (1382) P (Precision) 55% engine power. 9% of hydraulic flow for fine control of grading operations. 12 (48) 1.3 (1.35) 75 (1555) L (Lifting) 55% engine power. 63% of hydraulic flow with permanent power boost for maximum lifting 135 (53) 1.5 (1.37) 679 (1497) power and control. 145 (57) 1.14 (1.49) 72 (1588) The Auto mode allows the AMS processor to select the optimum operational performance to match the demands of the job while the three alternative modes give precise matching of application when specific tasks are undertaken. 15 (59) 1.19 (1.56) 734 (1618) The adjustable position monitor mounted on the front right hand pillar of the cab gives the operator a constant read out of mode, tracking range, operating temperature and a host of other information, while retaining excellent visibility of the monitor and the job being carried out. The required flow for hammer applications can be set and stored in the AMS memory and is automatically activated whenever the hammer pedal is depressed. SERVICE CAPACITIES A maintenance indicator warns of imminent service needs, and all servicing and basic checks can be carried out using only the in cab display. litres UK gal Fuel tank 343 75 Engine coolant 33.3 7.32 Engine oil 24.5 5.4 Swing reduction gear 5. 1 Hydraulic system 2 44 Hydraulic tank 226 49.7 Transmission 3..7 Axle hubs (each) 2.5.55
STANDARD EQUIPMENT Engine fan guard; Cold start pre-heat; Auto engine warm up; Double element air cleaner; Heavy-duty alternator; Electrics isolator; Heavy duty batteries; Cab & engine soundproofing; Cab heater & screen demister; Tinted glass; Interior light; Coat hook; Cigarette lighter; Ashtray; Operator s storage box; Removable floormat; Windscreen wash/wipe; Plug-in power socket; Automatic power boost; Auto-idle; One-touch engine speed control; Hydraulic cushion control; Plexus hydraulic oil filtration; HSP pressure test points; Auxiliary pipework mounting brackets; Work lights boom & mainframe mounted; Upper structure under covers; Swing system cover; External mirrors; Handrail & non slip walk ways; Quick connect engine oil drain pipe; Front screen blind; Quick connect fuel tank drain pipe; Hinged engine under cover. Chassis MONO 5T CWT TAB 4T CWT OPERATING WEIGHTS 2475kg 21283kg 2138kg 22647kg 2322kg (4514lb) (46921lb) (47135lb) (49928lb) (51152lb) 2546kg 21354kg 2199kg 22718kg 23273kg (45296lb) (4778lb) (4831lb) (585lb) (5138lb) OPTIONAL EQUIPMENT Hose burst check valves & overload warning system; Tipping link mounted lift points; General purpose buckets; Ditch/grading buckets; Quickhitch buckets; Hydraulic hammers; Auxiliary pipework (full and low flow); Climate control; Cab mounted & rear work lights; Rotating beacon; Rain guard; Biodegradeable oil; Air suspension seat with heated pad and lumbar support adjustment; Electric refuelling pump; Lower screen wiper; Radio; Cruise control; Grab stowage bar; FOPS (Level 2) operator protection; Biodegradeable oil; High and low temperature oils; Mesh front screen guard; Travel Alarm; Turbo II pre-cleaner. TAB 3.5T CWT (TUV COUNTRIES) 246kg 285kg 2149kg 22218kg 22773kg (44194lb) (45966lb) (47199lb) (48982lb) (526lb) Machine equipped with 2.4m (7-1) dipper excavating bucket and dual wheels. For single wheels subtract 4kg (88lb).
S 2 W S 2 W S2 W S2W S 2 W S 2 W S2W WHEELED EXCAVATOR S2W WORKING RANGES A A B G B G 12 12 11 11 1 1 9 9 8 8 7 S 2 W 7 D E 6 5 4 D E 6 5 4 3 3 2 2 1 1 C F Metres C F Metres 12 11 1 9 8 7 6 5 4 3 2 1 Metres 12 11 1 9 8 7 6 5 4 3 2 1 Metres WORKING RANGES Boom Boom length 5.7m (18-8) Boom length 5.63m (18-6) Dipper arm 1.91m (6-3) 2.4m (7-1) 3.m (9-1) 1.91m (6-3) 2.4m (7-1) 3.m (9-1) A Max digging reach mm (ft-in) 911 (29-1) 949 (31-1) 12 (32-1) 886 (29-) 928 (3-5) 9825 (32-3) B Max digging reach (on ground) mm (ft-in) 887 (29-1) 931 (3-6) 985 (32-3) 865 (28-4) 914 (3-) 965 (31-8) C Max digging depth mm (ft-in) 526 (17-3) 579 (18-) 637 (2-1) 547 (18-) 596 (19-6) 6475 (21-3) D Max digging height mm (ft-in) 919 (3-2) 943 (31-) 963 (31-7) 953 (31-3) 993 (32-6) 116 (33-4) E Max loadover height mm (ft-in) 647 (21-3) 676 (22-2) 698 (23-) 667 (21-1) 76 (23-2) 73 (24-) F Max vertical wall cut depth mm (ft-in) 454 (14-1) 524 (17-2) 584 (19-2) 376 (12-4) 42 (13-9) 4795 (15-9) G Min swing radius mm (ft-in) 39 (12-9) 386 (12-8) 375 (12-4) 325 (1-7) 326 (1-8) 295 (9-6) Bucket rotation 183 183 183 183 183 183 Dipper tearout kgf (lbf) 1634 (3625) 131 (2888) 145 (234) 1634 (3625) 131 (2888) 145 (234) Dipper tearout with boost kgf (lbf) 177 (392) 14 (3865) 1127 (24845) 177 (392) 14 (3865) 1127 (24845) Bucket tearout kgf (lbf) 1177 (2595) 1177 (2595) 1177 (2595) 1177 (2595) 1177 (2595) 1177 (2595) Bucket tearout with boost kgf (lbf) 1271 (282) 1271 (282) 1271 (282) 1271 (282) 1271 (282) 1271 (282)
LIFT CAPACITIES Dipper length: 1.9m, Monoboom 5.1m, No bucket, Front dozer, Rear stabilisers, 5 T Counterweight. S2W MONO 7.5m (24.6ft) 686* 686* 538 6.m (19.8ft) 659* 644 645* 554 6545 4.5m (14.9ft) 882* 882* 712* 624 634* 46 7262 3.m (9.1ft) 191* 99 798* 596 678* 428 655* 418 7613 1.5m (4.11ft) 1214* 867 871* 572 74* 418 693* 46 765 m 1222* 857 9* 561 716* 423 7378 1.5m ( 4.11ft) 1227* 1227* 1153* 863 863* 562 738* 48 6758 3.m ( 9.1ft) 1292* 1292* 979* 883 743* 629 5672 LIFT CAPACITIES Dipper length: 2.4m, Monoboom 5.1m, No bucket, Front dozer, Rear stabilisers, 5 T Counterweight. S2W MONO 7.5m (24.6ft) 53* 53* 594 6.m (19.8ft) 614* 614* 492* 492* 763 4.5m (14.9ft) 817* 817* 677* 64 621* 45 485* 441 7731 3.m (9.1ft) 131* 937 771* 61 656* 438 499* 45 861 1.5m (4.11ft) 1188* 885 856* 584 696* 426 535* 395 896 m 1236* 865 92* 568 714* 418 64* 48 7839 1.5m ( 4.11ft) 1164* 1164* 1197* 865 89* 565 75* 453 726 3.m ( 9.1ft) 1456* 1456* 163* 88 777* 577 723 564 6266 LIFT CAPACITIES Dipper length: 3.m, Monoboom 5.1m, No bucket, Front dozer, Rear stabilisers, 5 T Counterweight. S2W MONO 7.5m (24.6ft) 34* 34* 6653 6.m (19.8ft) 539* 539* 395* 395* 32* 32* 7669 4.5m (14.9ft) 61* 61* 562* 448 316* 316* 8287 3.m (9.1ft) 93* 93* 71* 61 69* 434 326* 326* 8594 1.5m (4.11ft) 1118* 889 89* 58 659* 418 349* 339 8627 m 637* 637* 129* 857 874* 559 693* 47 39* 348 8388 1.5m ( 4.11ft) 717* 717* 186* 186* 129* 849 888* 551 688* 44 466* 395 785 3.m ( 9.1ft) 1169* 1169* 16* 16* 1119* 857 827* 556 622* 472 6944 1246* 1246* 887* 886 685* 682 548 2. Lifting capacities are based on ISO 1567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
LIFT CAPACITIES Dipper length: 1.9m, Monoboom 5.1m, No bucket, Rear stabilisers, 5 T Counterweight. S2W MONO 7.5m (24.6ft) 686* 61 538 6.m (19.8ft) 659* 497 645* 427 6545 4.5m (14.9ft) 882* 738 712* 478 624 352 7262 3.m (9.1ft) 191* 672 798* 451 581 325 567 318 7613 1.5m (4.11ft) 1214* 633 84 429 571 316 554 37 765 m 1222* 624 791 418 58 319 7378 1.5m ( 4.11ft) 1227* 1227* 1153* 629 792 419 664 361 6758 3.m ( 9.1ft) 1292* 1269 979* 648 743* 472 5672 LIFT CAPACITIES Dipper length: 2.4m, Monoboom 5.1m, No bucket, Rear stabilisers, 5 T Counterweight. S2W MONO 7.5m (24.6ft) 53* 522 594 6.m (19.8ft) 614* 514 492* 389 763 4.5m (14.9ft) 817* 764 677* 493 65 347 485* 329 7731 3.m (9.1ft) 131* 698 771* 465 592 336 499* 3 861 1.5m (4.11ft) 1188* 65 817 44 579 324 516 29 896 m 1236* 632 799 426 57 316 535 299 7839 1.5m ( 4.11ft) 1164* 1164* 1197* 632 795 422 599 331 726 3.m ( 9.1ft) 1456* 1256 163* 645 777* 434 723* 411 6266 LIFT CAPACITIES Dipper length: 3.m, Monoboom 5.1m, No bucket, Rear stabilisers, 5 T Counterweight. S2W MONO 7.5m (24.6ft) 34* 34* 6653 6.m (19.8ft) 539* 517 395* 352 32* 32* 7669 4.5m (14.9ft) 61* 495 562* 345 316* 289 8287 3.m (9.1ft) 93* 71 71* 465 589 331 326* 264 8594 1.5m (4.11ft) 1118* 653 89* 436 572 316 349* 256 8627 m 637* 637* 129* 623 791 417 56 36 39* 261 8388 1.5m ( 4.11ft) 717* 717* 186* 186* 129* 616 781 49 556 32 466* 285 785 3.m ( 9.1ft) 1169* 1169* 16* 122 1119* 624 786 413 622* 342 6944 1246* 1246* 887* 649 685* 493 548 2. Lifting capacities are based on ISO 1567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
LIFT CAPACITIES Dipper length: 1.9m, Monoboom 5.1m, No bucket, 4 stabilisers, 5 T Counterweight. S2W MONO 7.5m (24.6ft) 686* 686* 538 6.m (19.8ft) 659* 659* 645* 645* 6545 4.5m (14.9ft) 882* 882* 712* 712* 634* 569 7262 3.m (9.1ft) 191* 191* 798* 746 678* 531 655* 519 7613 1.5m (4.11ft) 1214* 1126 871* 721 74* 521 693* 56 765 m 1222* 1114 9* 79 716* 529 7378 1.5m ( 4.11ft) 1227* 1227* 1153* 112 863* 71 738* 61 6758 3.m ( 9.1ft) 1292* 1292* 979* 979* 743* 743* 5672 LIFT CAPACITIES Dipper length: 2.4m, Monoboom 5.1m, No bucket, 4 stabilisers, 5 T Counterweight. S2W MONO 7.5m (24.6ft) 53* 53* 594 6.m (19.8ft) 614* 614* 492* 492* 763 4.5m (14.9ft) 817* 817* 677* 677* 621* 554 485* 485* 7731 3.m (9.1ft) 131* 131* 771* 761 656* 542 499* 485 861 1.5m (4.11ft) 1188* 1145 856* 733 696* 529 535* 473 896 m 1236* 1123 92* 716 714* 521 64* 491 7839 1.5m ( 4.11ft) 1164* 1164* 1197* 1122 89* 713 75* 546 726 3.m ( 9.1ft) 1456* 1456* 163* 163* 777* 725 723* 683 6266 LIFT CAPACITIES Dipper length: 3.m, Monoboom 5.1m, No bucket, 4 stabilisers, 5 T Counterweight. S2W MONO 7.5m (24.6ft) 34* 34* 6653 6.m (19.8ft) 539* 539* 395* 395* 32* 32* 7669 4.5m (14.9ft) 61* 61* 562* 553* 316* 316* 8287 3.m (9.1ft) 93* 93* 71* 71* 69* 538 326* 326* 8594 1.5m (4.11ft) 1118* 1118* 89* 73 659* 522 349* 349* 8627 m 637* 637* 129* 1115 874* 78 693* 51 39* 39* 8388 1.5m ( 4.11ft) 717* 717* 186* 186* 129* 116 888* 699 688* 57 466* 466* 785 3.m ( 9.1ft) 1169* 1169* 16* 16* 1119* 1115 827* 74 622* 573 6944 1246* 1246* 887* 887* 685* 685* 548 2. Lifting capacities are based on ISO 1567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
LIFT CAPACITIES Dipper length: 1.9m, Monoboom 5.1m, No bucket, Rear dozer, 5 T Counterweight. S2W MONO 7.5m (24.6ft) 686* 488 538 6.m (19.8ft) 659* 397 645* 339 6545 4.5m (14.9ft) 882* 579 712* 379 634* 277 7262 3.m (9.1ft) 191* 517 798* 353 678* 254 655* 248 7613 1.5m (4.11ft) 1214* 481 871* 332 74* 245 693* 238 765 m 1222* 472 9* 321 716* 247 7378 1.5m ( 4.11ft) 1227* 98 1153* 477 863* 322 738* 279 6758 3.m ( 9.1ft) 1292* 928 979* 495 743* 365 5672 LIFT CAPACITIES Dipper length: 2.4m, Monoboom 5.1m, No bucket, Rear dozer, 5 T Counterweight. S2W MONO 7.5m (24.6ft) 53* 421 594 6.m (19.8ft) 614* 414 492* 312 763 4.5m (14.9ft) 817* 66 677* 394 621* 276 485* 261 7731 3.m (9.1ft) 131* 543 771* 368 656* 265 499* 236 861 1.5m (4.11ft) 1188* 499 856* 344 696* 254 535* 227 896 m 1236* 482 92* 33 714* 247 64* 233 7839 1.5m ( 4.11ft) 1164* 899 1197* 481 89* 327 75* 258 726 3.m ( 9.1ft) 1456* 921 163* 494 777* 337 723* 321 6266 LIFT CAPACITIES Dipper length: 3.m, Monoboom 5.1m, No bucket, Rear dozer, 5 T Counterweight. S2W MONO 7.5m (24.6ft) 34* 34* 6653 6.m (19.8ft) 539* 416 395* 279 32* 267 7669 4.5m (14.9ft) 61* 394 562* 272 316* 226 8287 3.m (9.1ft) 93* 553 71* 365 69* 259 326* 25 8594 1.5m (4.11ft) 1118* 498 89* 338 659* 245 349* 197 8627 m 637* 637* 129* 471 874* 32 693* 235 39* 2 8388 1.5m ( 4.11ft) 717* 717* 186* 864 129* 464 888* 312 688* 232 466* 219 785 3.m ( 9.1ft) 1169* 1169* 16* 884 1119* 471 827* 316 622* 263 6944 1246* 924 887* 495 685* 381 548 2. Lifting capacities are based on ISO 1567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
LIFT CAPACITIES Dipper length: 1.91m, TAB 5.35m, No bucket, Front dozer, Rear stabilisers, 4 T Counterweight. 7.5m (24.6ft) 477* 477* 493* 493* 473 6.m (19.8ft) 465* 465* 476* 476* 484* 484* 614 4.5m (14.9ft) 572* 572* 497* 497* 495* 448 694 3.m (9.1ft) 745* 745* 566* 547 516* 397 7341 1.5m (4.11ft) 892* 79 64* 519 544* 38 7412 m 958* 768 692* 53 58* 393 7161 1.5m ( 4.11ft) 954* 768 698* 51 625* 446 6551 3.m ( 9.1ft) LIFT CAPACITIES Dipper length: 2.4m, TAB 5.35m, No bucket, Front dozer, Rear stabilisers, 4 T Counterweight. 7.5m (24.6ft) 45* 45* 543 6.m (19.8ft) 427* 427* 45* 45* 6687 4.5m (14.9ft) 679* 679* 519* 519* 464* 464* 463* 412 7426 3.m (9.1ft) 692* 692* 539* 539* 484* 396 484* 37 781 1.5m (4.11ft) 856* 812 621* 532 522* 383 511* 356 7867 m 948* 779 684* 511 553* 374 545* 365 7632 1.5m ( 4.11ft) 1234* 1234* 97* 772 78* 54 587* 45 765 3.m ( 9.1ft) 914* 785 726* 574 5543 LIFT CAPACITIES Dipper length: 3.m, TAB 5.35m, No bucket, Front dozer, Rear stabilisers, 4 T Counterweight. 7.5m (24.6ft) 373* 373* 359* 359* 625 6.m (19.8ft) 356* 356* 327* 327* 7325 4.5m (14.9ft) 429* 429* 41* 41* 398* 398* 317* 317* 83 3.m (9.1ft) 976* 976* 61* 61* 481* 481* 433* 394 321* 321* 8352 1.5m (4.11ft) 78* 78* 571* 531 48* 378 339* 314 8413 m 69* 69* 92* 776 647* 55 522* 364 374* 32 8194 1.5m ( 4.11ft) 1147* 1147* 953* 758 689* 492 54* 359 439* 349 767 3.m ( 9.1ft) 933* 763 677* 494 574* 421 6767 2. Lifting capacities are based on ISO 1567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
LIFT CAPACITIES Dipper length: 1.91m, TAB 5.35m, No bucket, Rear stabilisers, 4 T Counterweight. 7.5m (24.6ft) 477* 477* 493* 493* 473 6.m (19.8ft) 465* 465* 476* 445 484* 425 614 4.5m (14.9ft) 572* 572* 497* 433 495* 335 694 3.m (9.1ft) 745* 617 566* 46 516* 294 7341 1.5m (4.11ft) 892* 563 64* 38 532 279 7412 m 958* 543 692* 364 554 287 7161 1.5m ( 4.11ft) 954* 543 689* 362 625* 325 6551 3.m ( 9.1ft) LIFT CAPACITIES Dipper length: 2.4m, TAB 5.35m, No bucket, Rear stabilisers, 4 T Counterweight. 7.5m (24.6ft) 45* 45* 543 6.m (19.8ft) 427* 427* 45* 381 6687 4.5m (14.9ft) 679* 679* 519* 519* 464* 451 463* 31 7426 3.m (9.1ft) 692* 645 539* 421 484* 296 484* 276 781 1.5m (4.11ft) 856* 584 621* 392 522* 283 492 263 7867 m 948* 554 684* 372 521 274 58 268 7632 1.5m ( 4.11ft) 1234* 162 97* 547 78 366 568 297 765 3.m ( 9.1ft) 914* 558 726* 417 5543 LIFT CAPACITIES Dipper length: 3.m, TAB 5.35m, No bucket, Rear stabilisers, 4 T Counterweight. 7.5m (24.6ft) 373* 373* 359* 359* 625 6.m (19.8ft) 356* 356* 327* 324 7325 4.5m (14.9ft) 429* 429* 41* 41* 398* 37 317* 269 83 3.m (9.1ft) 976* 976* 61* 61* 481* 423 433* 293 321* 241 8352 1.5m (4.11ft) 78* 592 571* 39 48* 277 339* 229 8413 m 69* 69* 92* 549 647* 365 511 264 374* 232 8194 1.5m ( 4.11ft) 1147* 134 953* 533 689* 353 56 26 439* 252 767 3.m ( 9.1ft) 933* 59 677* 356 574 35 6767 2. Lifting capacities are based on ISO 1567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
LIFT CAPACITIES Dipper length: 1.91m, TAB 5.35m, No bucket, 4 stabilisers, 4 T Counterweight. 7.5m (24.6ft) 477* 477* 493* 493* 473 6.m (19.8ft) 465* 465* 476* 476* 484* 484* 614 4.5m (14.9ft) 572* 572* 497* 497* 495* 495* 694 3.m (9.1ft) 745* 745* 566* 566* 516* 52 7341 1.5m (4.11ft) 892* 892* 64* 64* 544* 483 7412 m 958* 958* 692* 647 58* 51 7161 1.5m ( 4.11ft) 954* 954* 698* 645 625* 571 6551 3.m ( 9.1ft) LIFT CAPACITIES Dipper length: 2.4m, TAB 5.35m, No bucket, 4 stabilisers, 4 T Counterweight. 7.5m (24.6ft) 45* 45* 543 6.m (19.8ft) 427* 427* 45* 45* 6687 4.5m (14.9ft) 679* 679* 519* 519* 464* 464* 463* 463* 7426 3.m (9.1ft) 692* 692* 539* 539* 484* 484* 484* 466 781 1.5m (4.11ft) 856* 856* 621* 621* 522* 484 511* 45 7867 m 948* 948* 684* 656 553* 474 545* 463 7632 1.5m ( 4.11ft) 1234* 1234* 97* 97* 78* 648 587* 515 765 3.m ( 9.1ft) 914* 914* 726* 726* 5543 LIFT CAPACITIES Dipper length: 3.m, TAB 5.35m, No bucket, 4 stabilisers, 4 T Counterweight. 7.5m (24.6ft) 373* 373* 359* 359* 625 6.m (19.8ft) 356* 356* 327* 327* 7325 4.5m (14.9ft) 429* 429* 41* 41* 398* 398* 317* 317* 83 3.m (9.1ft) 976* 976* 61* 61* 481* 481* 433* 433* 321* 321* 8352 1.5m (4.11ft) 78* 78* 571* 571* 48* 479 339* 339* 8413 m 69* 69* 92* 92* 647* 647* 522* 465 374* 374* 8194 1.5m ( 4.11ft) 1147* 1147* 953* 953* 689* 636 54* 46 439* 439* 767 3.m ( 9.1ft) 933* 933* 677* 638 574* 539 6767 2. Lifting capacities are based on ISO 1567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
LIFT CAPACITIES Dipper length: 1.91m, TAB 5.35m, No bucket, Rear dozer, 4 T Counterweight. 7.5m (24.6ft) 477* 477* 493* 493* 473 6.m (19.8ft) 465* 465* 476* 349 484* 332 614 4.5m (14.9ft) 572* 535 497* 337 495* 258 694 3.m (9.1ft) 745* 468 566* 311 516* 223 7341 1.5m (4.11ft) 892* 417 64* 286 544* 29 7412 m 958* 398 692* 271 58* 214 7161 1.5m ( 4.11ft) 954* 398 698* 269 625* 243 6551 3.m ( 9.1ft) LIFT CAPACITIES Dipper length: 2.4m, TAB 5.35m, No bucket, Rear dozer, 4 T Counterweight. 7.5m (24.6ft) 45* 435 543 6.m (19.8ft) 427* 37 45* 299 6687 4.5m (14.9ft) 679* 679* 519* 519* 464* 354 463* 24 7426 3.m (9.1ft) 692* 494 539* 326 484* 227 484* 21 781 1.5m (4.11ft) 856* 437 621* 298 522* 215 511* 198 7867 m 948* 49 684* 279 553* 26 545* 21 7632 1.5m ( 4.11ft) 1234* 749 97* 42 78* 273 587* 223 765 3.m ( 9.1ft) 914* 413 726* 312 5543 LIFT CAPACITIES Dipper length: 3.m, TAB 5.35m, No bucket, Rear dozer, 4 T Counterweight. 7.5m (24.6ft) 376* 374* 357* 349 625 6.m (19.8ft) 358* 358* 325* 254 7325 4.5m (14.9ft) 432* 432* 45* 36 43* 24 315* 29 83 3.m (9.1ft) 988* 933 68* 514 487* 331 438* 228 319* 185 8352 1.5m (4.11ft) 79* 452 579* 31 486* 213 337* 174 8413 m 688* 688* 914* 414 655* 279 529* 21 373* 176 8194 1.5m ( 4.11ft) 1144* 743 965* 4 698* 268 547* 197 438* 191 767 3.m ( 9.1ft) 945* 43 686* 27 573* 232 6767 2. Lifting capacities are based on ISO 1567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
LIFT CAPACITIES Dipper length: 1.91m, TAB 5.35m, No bucket, Front dozer, Rear stabilisers, 3.5 T Counterweight. 7.5m (24.6ft) 477* 477* 493* 493* 473 6.m (19.8ft) 465* 465* 476* 476* 484* 484* 614 4.5m (14.9ft) 572* 572* 497* 497* 495* 422 694 3.m (9.1ft) 745* 745* 566* 516 516* 373 7341 1.5m (4.11ft) 892* 744 64* 488 544* 357 7412 m 958* 721 692* 472 58* 369 7161 1.5m ( 4.11ft) 954* 721 698* 47 625* 419 6551 3.m ( 9.1ft) LIFT CAPACITIES Dipper length: 2.4m, TAB 5.35m, No bucket, Front dozer, Rear stabilisers, 3.5 T Counterweight. 7.5m (24.6ft) 45* 45* 543 6.m (19.8ft) 427* 427* 45* 45* 6687 4.5m (14.9ft) 679* 679* 519* 519* 464* 464* 463* 389 7426 3.m (9.1ft) 692* 692* 539* 532 484* 373 484* 348 781 1.5m (4.11ft) 856* 766 621* 51 522* 36 511* 334 7632 m 948* 733 684* 48 553* 351 545* 342 7632 1.5m ( 4.11ft) 1234* 1234* 97* 725 78* 473 587* 38 765 3.m ( 9.1ft) 914* 738 726* 54 5543 LIFT CAPACITIES Dipper length: 3.m, TAB 5.35m, No bucket, Front dozer, Rear stabilisers, 3.5 T Counterweight. 7.5m (24.6ft) 373* 373* 359* 359* 625 6.m (19.8ft) 356* 356* 327* 327* 7325 4.5m (14.9ft) 429* 429* 41* 41* 398* 385 317* 317* 83 3.m (9.1ft) 976* 976* 61* 61* 481* 481* 433* 371 321* 37 8352 1.5m (4.11ft) 78* 776 571* 5 48* 355 339* 294 8413 m 69* 69* 92* 729 647* 474 522* 341 374* 299 8194 1.5m ( 4.11ft) 1147* 1147* 953* 712 689* 461 54* 336 439* 326 767 3.m ( 9.1ft) 933* 716 677* 463 574* 394 6767 2. Lifting capacities are based on ISO 1567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
LIFT CAPACITIES Dipper length: 1.91m, TAB 5.35m, No bucket, Rear stabilisers, 3.5 T Counterweight. 7.5m (24.6ft) 477* 477* 493* 493* 473 6.m (19.8ft) 465* 465* 476* 418 484* 399 614 4.5m (14.9ft) 572* 572* 497* 47 495* 312 694 3.m (9.1ft) 745* 577 566* 379 516* 273 7341 1.5m (4.11ft) 892* 524 64* 353 53 258 7412 m 958* 53 685 337 523 265 7161 1.5m ( 4.11ft) 954* 54 683 335 6 31 6551 3.m ( 9.1ft) LIFT CAPACITIES Dipper length: 2.4m, TAB 5.35m, No bucket, Rear stabilisers, 3.5 T Counterweight. 7.5m (24.6ft) 45* 45* 543 6.m (19.8ft) 427* 427* 45* 357 6687 4.5m (14.9ft) 679* 679* 519* 519* 464* 424 463* 289 7426 3.m (9.1ft) 692* 66 539* 394 484* 275 482 256 781 1.5m (4.11ft) 856* 544 621* 365 52 263 465 243 7867 m 948* 514 684* 345 492 254 479 248 7632 1.5m ( 4.11ft) 1234* 988 97* 57 685 339 537 275 765 3.m ( 9.1ft) 914 519 726* 387 5543 LIFT CAPACITIES Dipper length: 3.m, TAB 5.35m, No bucket, Rear stabilisers, 3.5 T Counterweight. 7.5m (24.6ft) 373* 373* 359* 359* 625 6.m (19.8ft) 356* 356* 327* 33 7325 4.5m (14.9ft) 429* 429* 41* 41* 398* 286 317* 25 83 3.m (9.1ft) 976* 976* 61* 61* 481* 396 433* 273 321* 223 8352 1.5m (4.11ft) 78* 552 571* 363 48* 257 339* 211 8413 m 69* 69* 92* 51 647 339 482 244 374* 213 8194 1.5m ( 4.11ft) 1147* 96 953* 494 672 326 477 239 439* 232 767 3.m ( 9.1ft) 933* 498 675 329 564 282 6767 2. Lifting capacities are based on ISO 1567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
LIFT CAPACITIES Dipper length: 1.91m, TAB 5.35m, No bucket, 4 stabilisers, 3.5 T Counterweight. 7.5m (24.6ft) 477* 477* 493* 493* 473 6.m (19.8ft) 465* 465* 476* 476* 484* 484* 614 4.5m (14.9ft) 572* 572* 497* 497* 495* 495* 694 3.m (9.1ft) 745* 745* 566* 566* 516* 475 7341 1.5m (4.11ft) 892* 892* 64* 63 544* 457 7412 m 958* 958* 692* 612 58* 474 7161 1.5m ( 4.11ft) 954* 954* 698* 61 625* 54 6551 3.m ( 9.1ft) LIFT CAPACITIES Dipper length: 2.4m, TAB 5.35m, No bucket, 4 stabilisers, 3.5 T Counterweight. 7.5m (24.6ft) 45* 45* 543 6.m (19.8ft) 427* 427* 45* 45* 6687 4.5m (14.9ft) 679* 679* 519* 519* 464* 464* 463* 463* 7426 3.m (9.1ft) 692* 692* 539* 539* 484* 472 484* 441 781 1.5m (4.11ft) 856* 856* 621* 621* 522* 458 511* 425 7867 m 948* 948* 684* 621 553* 449 545* 438 7632 1.5m ( 4.11ft) 1234* 1234* 97* 966 78* 613 587* 487 765 3.m ( 9.1ft) 914* 914* 726 72 5543 LIFT CAPACITIES Dipper length: 3.m, TAB 5.35m, No bucket, 4 stabilisers, 3.5 T Counterweight. 7.5m (24.6ft) 373* 373* 359* 359* 625 6.m (19.8ft) 356* 356* 327* 327* 7325 4.5m (14.9ft) 429* 429* 41* 41* 398* 398* 317* 317* 83 3.m (9.1ft) 976* 976* 61* 61* 481* 481* 433* 433* 321* 321* 8352 1.5m (4.11ft) 78* 78* 571* 571* 48* 453 339* 339* 8413 m 69* 69* 92* 92* 647* 615 522* 439 374* 374* 8194 1.5m ( 4.11ft) 1147* 1147* 953* 952 689* 61 54* 434 439* 421 767 3.m ( 9.1ft) 933* 933* 677* 64 574* 59 6767 2. Lifting capacities are based on ISO 1567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
LIFT CAPACITIES Dipper length: 1.91m, TAB 5.35m, No bucket, Rear dozer, 3.5 T Counterweight. 7.5m (24.6ft) 477* 477* 493* 493* 473 6.m (19.8ft) 465* 465* 476* 325 484* 39 614 4.5m (14.9ft) 572* 5 497* 313 495* 237 694 3.m (9.1ft) 745* 433 566* 287 516* 24 7341 1.5m (4.11ft) 892* 383 64* 262 544* 191 7412 m 958* 363 692* 247 58* 195 7161 1.5m ( 4.11ft) 954* 364 698* 245 625* 221 6551 3.m ( 9.1ft) LIFT CAPACITIES Dipper length: 2.4m, TAB 5.35m, No bucket, Rear dozer, 3.5 T Counterweight. 7.5m (24.6ft) 45* 48 543 6.m (19.8ft) 427* 346 45* 277 6687 4.5m (14.9ft) 679* 679* 519* 519* 464* 33 463* 221 7426 3.m (9.1ft) 692* 46 539* 32 484* 28 484* 193 781 1.5m (4.11ft) 856* 42 621* 274 522* 196 511* 181 7867 m 948* 374 684* 255 553* 188 545* 183 7632 1.5m ( 4.11ft) 1234* 688 97* 368 78* 249 587* 23 765 3.m ( 9.1ft) 914* 379 726* 285 5543 LIFT CAPACITIES Dipper length: 3.m, TAB 5.35m, No bucket, Rear dozer, 3.5 T Counterweight. 7.5m (24.6ft) 376* 35 357* 326 625 6.m (19.8ft) 358* 353 325* 235 7325 4.5m (14.9ft) 432* 432* 45* 335 43* 221 315* 191 83 3.m (9.1ft) 988* 871 68* 479 487* 37 438* 29 319* 158 8352 1.5m (4.11ft) 79* 417 579* 277 486* 195 337* 158 8413 m 688* 682* 914* 38 655* 255 529* 183 373* 159 8194 1.5m ( 4.11ft) 1144* 681 965* 365 698* 243 547* 178 438* 173 767 3.m ( 9.1ft) 945* 369 686* 245 573* 211 6767 2. Lifting capacities are based on ISO 1567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
A GLOBAL COMMITMENT TO QUALITY CB s total commitment to its products and customers has helped it grow from a one-man business into Britain s largest privately owned manufacturer of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders, tractors and compaction equipment. By making constant and massive investments in the latest production technology, the CB factories have become some of the most advanced in the world. By leading the field in innovative research and design, extensive testing and stringent quality control, CB machines have become renowned all over the world for performance, value and reliability. And with a global sales and service network of more than 65 dealers and agents, we aim to deliver the best customer support in the industry. Through setting the standards by which others are judged, CB has become one of the world s most impressive success stories. CB Sales Limited, Rocester, Staffordshire ST14 5P. Tel: 1889 59312. Fax: 1889 59588. Web: http://www.jcb.com CB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The CB logo is a registered trademark of C Bamford Excavators Ltd. 9999/4983 3/1 Issue 6