c Installation Instructions K-Series Fork Positioner Termination Kits 0, 0, 0, 000 and 0 This sheet provides installation instructions and replacement parts list for Cascade High Termination Kits 0, 0, 0, 000 and Stationary Termination Kit 0. The kits provide termination connections for the attachment s sideshifter and fork positioner functions to match truck termination connection points. The kits can be configured to have sideshift terminate on the left hand or right hand side. Supply Connection Hoses Sideshifter Termination Manifolds Supply Connection Hoses FP.eps Fork Positioner cascadew corporation For Technical Support... To Order Parts... Call: -00-- Fax: ---0 Call: --- Fax: ---0 Internet: www.cascorp.com Internet: www.cascorp.com Write: Cascade Corporation, PO Box 0, Portland, OR Write: Cascade Corporation, 0 Sheridan Ave., Springfield, OH 0
Component Installation K Attachments Mount the bracket to the sideshifter lower carriage bar. Tighten capscrew to ft.-lbs. ( Nm). FP0.eps Remove existing fittings for sideshift cylinder. Install fittings to manifolds. Determine which side of attachment the truck sideshifter supply and fork positioning supply will be on. Install manifolds to sideshift cylinder ports. NOTE: If cylinder ports contain restrictors, reinstall prior to installing the manifolds. Restrictors (if equipped) Sideshift SSR - Sideshift Supply on right (label must face toward sideshift cylinder) SSR SSR Manifold FP.eps Fork Position SSL - Sideshift Supply on left (label must face toward sideshift cylinder) SSL SSL Fork Position Sideshift
Install center tubes. One or both of the manifolds may need to be pivoted for installation. FP0.eps Install the kit fork positioner hoses. Route the hoses to prevent wear and pinch points. K Attachment FP0.eps K K Attachment FP00.eps
Install kit supply connection hoses (if included). NOTE: After supply connection hoses have been cut to length and reusable fittings have been installed, supply connection hoses must be flushed prior to being reinstalled on attachment. Close Open Sideshift Right Sideshift Left Fork Position Sideshift FP.eps SSR manifold layout shown Connect truck supply hoses to kit supply hoses. Fork Position Sideshift FP.eps SSR manifold layout shown
K High Termination Kit REF QTY PART NO. DESCRIPTION 0 K High Termination Kit Fitting, - Capscrew, MX 0 Bracket 00 Hose 0 Hose 0 Hose 00 Hose,.0 in. Fitting, - 0 Fitting, - 0 0 Connector, - 0 Fitting, - 0 Tube Fitting, - 0 Manifold 0 Tube 0 Adapter Fitting, - @ 0 $ % # ^ O C FP.eps
K, 0K, 0K & K High Termination Kit For units with in. (00 mm) or less total sideshift 0 O C FP.eps REF QTY PART NO. DESCRIPTION 0 K, 0K K High Termination Kit 0 Adapter Fitting, - 0 Tube Fitting, - 0 Manifold 0 Tube 0 Fitting, - 0 Connector, - 0 Fitting, - 000 Hose,.0 in. 0 0 Hose,.0 in. Fitting, -
00K High Termination Kit 0 O C FP0.eps REF QTY PART NO. DESCRIPTION 000 00K High Termination Kit 0 Adapter Fitting, - 0 Tube Fitting, - 0 Manifold 0 Tube 0 Fitting, - 0 Connector, - 0 Fitting, - 00 Hose,.0 in. 0 0 Hose,.0 in. Fitting, -
0K & K High Termination Kit For units with greater than in. (00 mm) total sideshift @ 0 O C FP.eps REF QTY PART NO. DESCRIPTION 0 0K K High Termination Kit 0 Adapter Fitting, - 0 Tube Fitting, - 0 Manifold 0 Tube 0 Fitting, - 0 Connector, - 0 Fitting, - 000 Hose,.0 in. 0 0 Hose,.0 in. 0 Hose,.0 in. Fitting, -
K Stationary Termination Kit REF QTY PART NO. DESCRIPTION 0 K Termination Kit Fitting, - Capscrew, M x 0 Bracket 00 Hose, 00 mm 0 Hose, 0 mm 0 Hose, mm 0 Tube Fitting, - 0 Manifold 0 0 Fitting, - 0 Fitting, - 0 C O FP.eps
Do you have questions you need answered right now? Call your nearest Cascade Service Department. Visit us online at www.cascorp.com AMERICAS Cascade Corporation U.S. Headquarters 0 NE 0st Fairview, OR 0- Tel: 00-CASCADE (-) Fax: --0 Cascade Canada Inc. 0 Timberlea Blvd. Mississauga, Ontario Canada LW-M Tel: 0-- Fax: 0-- Cascade do Brasil Praça Salvador Rosa, /-Jordanópolis, São Bernardo do Campo - SP CEP 0-0 Tel: --0-00 Fax: --0- EUROPE-AFRICA Cascade Italia S.R.L. European Headquarters Via Dell Artigianato 00 Vago di Lavagno (VR) Italy Tel: -0- Fax: -0-0 Cascade (Africa) Pty. Ltd. PO Box, Isando 00 0A Steel Road Sparton, Kempton Park South Africa Tel: ---0 Fax: --- ASIA-PACIFIC Cascade Japan Ltd. -, -Chome, Kukuchi Nishimachi Amagasaki, Hyogo Japan, -0 Tel: --0- Fax: --0- Cascade Korea B L Namdong Ind. Complex, - Gojan-Dong Namdong-Ku Inchon, Korea Tel: +---0 Fax: +---0 Cascade-Xiamen No. Yangguang Rd. Xinyang Industrial Zone Haicang, Xiamen City Fujian Province P.R. China 0 Tel: ---00 Fax: --- Cascade India Material Handling Private Limited No, Global Trade Centre / Rambaugh Colony Lal Bahadur Shastri Road, Navi Peth, Pune 00 (Maharashtra) India Phone: + 00 0 Fax: + 00 0 Cascade Australia Pty. Ltd. Ipswich Road Rocklea, QLD 0 Australia Tel: -00-- Fax: + - Cascade New Zealand Ra Ora Drive East Tamaki, Auckland New Zealand Tel: +--- Fax: +--- Sunstream Industries Pte. Ltd. Tuas South Street Singapore Tel: +-- Fax: +-- c Cascade Corporation 0 0-0 0 Part Number 00-R