esense article overview E1409-9000 series Document ID: E1409_20180518_esense 9000 article overview_r10.00
esense is a product by: Indes Production Management Pantheon 28 7521 PR Enschede PO box 265 7500 AG Enschede The Netherlands T +31 (0)53 4803920 E info@esense-moves.com W esense-moves.com Document ID: E1409_20180518_esense 9000 article overview_r10.00 1
1 Table of contents 1 Table of contents... 2 2 esense configurations... 3 2.1 General description... 3 2.2 System build-up... 3 2.3 Fixed or 360 functionality... 3 2.4 Pre-defined esense configurations... 5 2.5 Schematic overview of pre-defined esense configurations... 5 2.6 Custom integration projects... 5 2.7 Configuration selection table... 6 3 Article and configuration overview... 7 4 Ordering... 8 4.1 Guidelines... 8 4.2 Examples... 8 5 Article specification... 9 5.1 Basic components... 9 5.2 Alternative components... 20 5.3 Accessory parts... 24 6 Spare parts overview... 28 7 Installation tools... 30 8 Connection schemes... 31 8.1 esense Fixed... 31 8.2 esense 360... 32 9 System specification... 33 10 Compliance... 34 11 Distribution and authorization list... 35 12 Revision list... 35 13 esense documentation... 35 2
2 esense configurations 2.1 General description Esense is an accessory for heavy mobile care products, offering intuitive electric drive support for forwards, backwards and optionally sideways driving. Examples of products suitable for integration with esense are: Hospital beds Patient stretchers Bariatric care products CSA trolleys Food trolleys Distribution trolleys Patient lifts Examples of products with esense drive support. 2.2 System build-up Each esense system minimally comprises of a Driveunit with electric drivewheel, a controller box containing the electronic controllers of the system, an intelligent User Interface, one or more intuitive force sensitive sensors and all interconnecting cabling. Additional to this the system can be extended with a batterypack with charger and an IPx4 waterproof enclosure. Next to these basic components a number of accessory parts is available, including: A cable to add additional switches to the system that can temporarily switch off the electric drive (immobilizers). This can for instance be used to switch drive functionality off when a trolley is on its mechanical brake. A mechanism to manually lift the wheel in case of emergency situations. Sets of brackets to add alternative mounting options for the Driveunit or charger A cable to extend the distance between the controller box and the Driveunit Fixed. 2.3 Fixed or 360 functionality Esense systems are available with two different Driveunits; Fixed or 360. The Fixed version only supplies electric drive support in forwards and backwards direction. The 360 version adds sideways drive to this, making it most suitable for situations where maneuvering in small spaces is required. The Driveunit 360 is typically used in combination with mobile products with four swivel wheels. For best performance the Driveunit is installed as a fifth wheel in a central position between the swivel wheels. 3
Typical position of the Driveunit 360. The Driveunit 360 provides functionality to: Drive forward, backwards and in wide curves with drive support. Forwards and backwards driving is controlled by use of a pair of intuitive force sensitive sensor handles. Drive 90 sideways in left and right direction, using a switch on the user interface. On some products, like for instance patient lifts, due to geometrical restrictions, it may not be possible to install Driveunit 360 in a central position between the four swivel wheels. On these products the Driveunit may be positioned in the front or at the back of the product. For optimal drive and steering experience the sensor and control software are customized to create intuitive active steering. Alternative position of the Driveunit 360 combined with active steering. The Driveunit Fixed is typically used in combination with trolleys with 2 rigid wheels and 2 swivel wheels or short trolleys with 4 swivel wheels. In this situation the Drive wheel shall be positioned as a fifth wheel central between the 2 rigid wheels of the trolley, or central between the 4 swivel wheels. Typical position of the Driveunit Fixed. The Driveunit Fixed only provides functionality to drive forward, backwards and in wide curves. Sideways driving is not available. 4
2.4 Pre-defined esense configurations On common request six different pre-defined esense configurations are available. A first differentiation is in Fixed or 360 systems. Both the Fixed and 360 versions are available in three variations. Esense Basic The most cost effective configurations. Suitable for integration inside mobile products during production. These configurations include a Driveunit, controller box, user interface, sensor handles and interconnecting cables. The system is to be powered by the trolleys own 24V or 36V battery. Esense Power Equal functionality to Esense Fixed, but including a 24V 9Ah battery and waterproof charger. Suitable for integration inside mobile products during production. Esense Box In addition to the Power versions the battery and controller box of these configurations are housed in an IPx4 water resistant enclosure. These systems are well suited for installation on the outside of mobile products, including aftermarket installation. 2.5 Schematic overview of pre-defined esense configurations 2.6 Custom integration projects For many products the six pre-defined configurations offer sufficient options. For more advanced products, Indes, the company behind esense offers integration projects to further customize the system. These projects offer for instance: Alternative sensors (suitable for integration inside the product or adding. Customised cabling (different lengths, spiral cable etc.). A disconnectable charger instead of integrated charger. Custom membrane switch foils for the User Interface. 5
Addition of DC controllers to control all movement of motors and actuators in a product Custom drive and steering behavior Customised software routines to tailor full product behavior. Indes development team combines expertise in mechanical, electronics and software engineering. Indes offers support in meeting all product requirements, including the Machinery, Medical Device and EMC directives. Please contact Indes to discuss options. 2.7 Configuration selection table Aftermarket installation. Small series integration. Integration on outside of mobile product. Integration inside the technical space of a mobile product during production. Powered by esense 24V/ 9Ah battery. Integration inside the technical space of a mobile product during production. Powered by the products existing 24V or 36V batterypack. Customised cabling. Additional or custom interfaces. Alternative sensors. Additional motor controllers. Custom software. Fixed functionality E1409-9030 Esense Fixed Box E1409-9020 Esense Fixed Power E1409-9010 Esense Fixed Basic Custom Integration project 360 functionality E1409-9060 Esense 360 Box E1409-9050 Esense 360 Power E1409-9040 Esense 360 Basic Custom Integration project 6
3 Article and configuration overview Article number Article name E1409-9010 esense Fixed Basic Basic components E1409-1200 esense Controller Box E1409-2000 esense UI 2 E1107-2035 Sensor Handle 2018* E1106-4000 Driveunit Fixed E1106-1000 Driveunit 360 E1409-1300 Battery Bracket E1409-1400 Batterypack NiMH 9Ah E1409-1500 Charger NiMH Waterproof E1409-1100 esense Enclosure CAB029-L1 360 Wheel - Box L1 CAB032-L1 Steering - Box L1 CAB033-L1 Position - Main IO L1 CAB040-L1 Fixed Wheel - Box L1 CAB100-L1 UI 2 - Box L1 CAB111 Main IO v3 E1409-9020 esense Fixed Power E1409-9030 esense Fixed Box E1409-9040 esense 360 Basic E1409-9050 esense 360 Power E1409-9060 esense 360 Box * E1107-2035 Sensor Handle 2018 replaces E1107-2030 Sensor handle mid 2018. Two Sensor Handles are included in each predefined configuration. Alternative components E1409-2620 360 Force Sensor Alternative for E1107-2030 Sensor handles E1409-2650 Gland 2way UI 2 Cable gland for waterproof entry of the E1409-2620 Sensor E1409-2630 Central Force Sensor Alternative for E1107-2030 Sensor handles E1409-1600 Charger NiMH Disconnectable Alternative for E1409-1500 Charger Waterproof E1409-1450 Charge Connector With Cover To be used in combination with E1409-1600 Accessory parts E1107-2010 Mounting set 360 Accessory for 360 configurations E1409-1510 Charger Bracket Accessory for Power and Box configurations E1106-8000 Mechanical Wheel Lift Accessory for all configurations E1107-2032 Handle End Plugs (set of 10) Accessory for all configurations E1409-2530 Key Magnet (set of 10) Accessory for all configurations E1409-2300 External mini USB Accessory for all configurations CAB027 Fixed Wheel Extension Cable Accessory for Fixed configurations CAB073 Battery - Main 2 Accessory for Basic configurations CAB112-L1 Immobilizer - Main IO Accessory for all configurations. To be used with CAB111. CAB113-L1 Ground Wire Accessory for Box configurations Spare parts E1106-0666 Drivewheel E1409-2500 UI 2 Controller E1409-2520 IP Seal EPDM Controller (set of 10) E1409-2540 IP Seal EPDM Back Cover (set of 10) E1409-2600 UI 2 Waterproof Cover E1409-2640 Gland 3way UI 2 E1409-2200 EMO Switch With Cable L3 E1409-2510 Dust Cover USB (set of 10) E1409-0100 esense Membrane Foil E1107-2031 Handle Cap (set of 10) E1409-1460 Charge Connector Cover (set of 10) 7
4 Ordering 4.1 Guidelines Esense systems have to be ordered as one of the six pre-defined sets (E1409-9010 up to 9060). To these sets additional parts can be added. These can be selected from all component categories (basic, alternative, accessory or spare). Pricing of additional parts can be found in the esense spare part price list. Additional parts shall be listed in separate lines in an order. Parts listed in the category Alternative components can be exchanged with parts from a standard set. Pricing of the full set remains equal. To order such a system the alternative part(s) shall be listed in the same line as the full set. The mark Alternative: shall be added before the alternative parts to confirm it concerns exchange parts. It is not possible to order a set that excludes any parts. Any part removed from a standard set must always be replaced by an alternative. 4.2 Examples You want to order 10 esense Fixed sets without Batterypack and Enclosure, but with a Mechanical Wheel Lift and a cable for an external Batterypack. Your order: 10 x E1409-9010 esense Fixed Basic 10 x E1106-8000 Mechanical Wheel Lift 10 x CAB073 Battery Main 2 The Mechanical Wheel lift and Battery Cable will be packed separately. You want to order 10 esense 360 sets without Batterypack, but with Enclosure and 3 sets of Key Magnets. Your order: 10 x E1409-9040 esense 360 Basic 10 x E1409-1100 esense Enclosure 3 x E1409-2530 Key Magnet (set of 10) The Enclosures and Key magnets will be packed separately. You want to order 30 esense 360 Box sets, but with a single sensor instead of the two sensor handles and with a disconnectable charger and connector instead of the standard Waterproof charger. Your order: 30 x E1409-9060 Esense 360 Power - Alternative: E1409-2620 360 Force Sensor, E1409-1600 Charger NiMH Disconnectable, E1409-1450 Charge Connector With Cover The alternative parts will be packed with the full sets. The esense Controller Box will be programmed with a software version that enables use of the alternative sensor. Pricing of the complete set remains equal. 8
5 Article specification 5.1 Basic components Art. number E1409-1200 esense Controller Box Electronics controller. Central intelligence of each esense system. Included fixation material - 9
Weight Material housing Required power supply Protection rating Fuse Power connector 0.9 Kg Sendzimir (Zinc plated sheet metal) 24 V/ 20 A peak IP1x 58V/ 20A blade fuse Tyco UMNL Art. number E1409-2000 esense UI 2 Controller that gathers the user intent (force on sensors, push of buttons) and communicates system status like for instance battery and service indication. Included fixation material 4 x Socket cap screw M4x16 for through panel mount E1409-2640 Gland 3way UI 2 Weight 0.3 Kg Mounting options Through panel On panel 2 x 4 Mould inserted nuts on housing back ality On/ Off switch Left/ right drive switches Emergency switch Magnet key lock 10
5 level battery indication Issue specific service indication Immobilizer indication (Drive switched off by external switches) Sound alert Automatic switch off Double force sensor connection USB connector Housing material PC/ ABS Housing color RAL 7012 Basalt Grey Flammability rating UL 746C V0 Protection rating IPx4 Cleaning Suitable for cleaning with mild cleaning agents (PH 5.5-8) Art. number E1107-2035/ E1107-2030 Sensor Handle 2018/ Sensor Handle Remark E1107-2035 Sensor Handle 2018 replaces E1107-2030 Sensor Handle mid 2018. Usability and stability of the installation system are improved. Further performance is equal. Force sensitive sensors inside the handle capture the users push force on the trolley. The user interface and controller box compute this to drive support of the wheel. Included fixation material 2 x Socket cap screw M5x12 1 x Socket cap screw M4x16 Weight 0.6 Kg Cable length 1.9 m Surface finish Satin chromium plated Applicable tube diameter 25.0 mm ±0.1 mm Max. push force sensor 20 kg (Mechanical force limitation included) Protection rating IP65 Cleaning Suitable for cleaning with mild cleaning agents (PH 5.5-8) 11
Art. Number E1106-4000 Driveunit Fixed Wheel assembly that pushes the drive wheel with constant force to the ground. The DriveUnit Fixed positions the wheel in forwards/ backwards directon only. Optimal build-in height Travel & Wheel height 200 mm With travel adjustment: 160 210 mm (±3 mm) Without travel adjustment: 160 250 mm (±3 mm) Included fixation material - Weight 6.2 Kg Force of wheel on floor Average 400 N Tyre Polyurethane Advised castor configuration Centered on axis line between 2 rigid wheels Central between 4 swivel wheels Protection rating Driveunit wheel torque IPx4 See system specification 12
Art. Number E1106-1000 Driveunit 360 Revision - Wheel assembly that pushes the drive wheel with constant force to the ground. The DriveUnit 360 is equipped with an electric mechanism that can position the wheel in any position; thus providing advanced steering options. Optimal build-in height Travel & wheel height 200 mm With travel adjustment: 160 210 mm (±3 mm) Without travel adjustment: 160 250 mm (±3 mm) Included fixation material - Weight 10.4 Kg Force of wheel on floor App. 400 N Tyre Polyurethane Required trolley wheel Central between 4 swivel wheels configuration Max distance between wheels 1500 mm Protection rating Steer rotation speed Drive wheel force Steer motor force IPx3 90 degrees/ second See general specs Sufficient force for wheel rotation on 10 mm high poled carpet. Software controlled overload protection. 13
Art. number E1409-1300 Battery Bracket A metal bracket to mount the esense Battery pack safe and sturdy. The bracket can be opened and closed with a click function. Included fixation material - Weight 0.6 Kg Material Sendzimir (Zinc plated sheet metal) 14
Art. Number E1409-1400 Batterypack NiMH 9Ah Provides power to the esense system with sufficient capacity to drive over 15 km. Protection rating Battery voltage Battery capacity Battery type Battery management Guaranteed battery lifetime Weight None. Suitable only for installation in min. IP22 protected area. 24 V DC 9 Ah NiMH Integrated Battery Management electronics 500 full charge cycles or 2 years; whichever comes first 3.8 Kg 15
Art. Number E1409-1500 Charger NiMH Waterproof Waterproof charger for the esense Battery pack. Designed for a fixed installation to the Battery pack. The mains cable may be cut to add a disconnection point. Mounting options Double sided tape or additional mounting bracket Included fixation material - Weight 1.1 Kg (including cables) Input 90 ~ 264 V AC 50 ~ 60Hz 1.3A Output Max. 65 W Protection rating IP 67 Medical approval EN 60601-1 Cable length Charger to 1.6 m (±0.05 m) Batterypack (LA) Cable length Mains to Charger (LB) 2 m (not disconnectable) 16
Art. number E1409-1100 esense Enclosure Waterproof, impact proof and flame retardant enclosure. Protects Controller Box and Batterypack. Pre-assembly For esense Box systems the esense Enclosure is delivered with the Battery Bracket, Batterypack, Controller Box and cabling to DriveUnit and UI 2 pre-mounted. Mounting options 4 x M4 Included fixation material Screws for mounting of the esense Controller Box and Battery Bracket inside the enclosure. Screws to close the enclosure lid. Weight 1.0 Kg Box material PC Box color RAL 7035 Light grey Cable lead system Water protection and strain relief Protection rating IPx4 Flammability rating UL 746C V0 17
Art. number CAB029-L1 360 Wheel - Box L1 Connects the DriveUnit 360 wheel to the Controller Box. Cable length (LA) Art. number 1 m CAB032-L1 Steering - Box L1 Connects the DriveUnit 360 steering motor to the Controller Box. Cable length (LA) Art. number 1 m CAB033-L1 Position - Main IO L1 Connects the Driveunit 360 position sensor to the Controller Box. Cable length Art. number 1 m CAB040-L1 Fixed Wheel - Box L1 Connects the DriveUnit Fixed wheel to the Controller Box. Cable length (LA) 1 m 18
Art. number CAB100-L1 UI 2 - Box L1 Connects the User Interface 2 to the Controller Box. Cable length (LA) Art. number 2 m CAB111 Main IO v3 Provides additional connectors to connect various other cables to the Controller Box. Cable length 0.08 m 19
5.2 Alternative components Art. number E1409-2620 360 Force Sensor Omni directional sensor for integration inside products. Able to provide advanced steering options in combination with Driveunit 360. Mounting options 8 x M6 Included fixation material - Max. push force sensor 100 kg Protection rating IP65 Cable length 0.35 m 20
Art. number E1409-2650 Gland 2way UI2 Provide a waterproof entry to the UI 2 Waterproof Cover for the CAB100 UI 2 Box and E1409-2620 360 Force Sensor cabling. Mounting options Through hole. Max. panel width 5 mm. Included fixation material M20 brass nut Applicable tool Key 24 Protection rating IPx6 Flammability rating Body: UL 94 V2 Insert: UL 94 HB Art. number E1409-2630 Central Force Sensor Robust force sensor for integration inside products. Mounting options 8 x M8 Included fixation material - Max. push force sensor 50 kg Protection rating IP65 Cable length 0.7 m 21
Art. number E1409-1600 Charger NiMH Disconnectable Disconnectable charger for the esense Battery pack. To be used with the Charge Connector. Mounting options Included fixation material Double sided tape or additional bracket (not included) None. May be positioned with the Battery Charger Mounting Bracket. 0.6 Kg Weight Input 100 ~ 240V AC 50 ~ 60Hz 1.3A Output 24V/ 2.5A Protection rating IP 41 Safety EN 60601-1 Cable length Charger to electronics 1.0 m (±0.05 m) box (LA) Cable length mains to charger (LB) 2 m (±0.05 m) 22
Art. number E1409-1450 Charge Connector With Cover Short cable to provide a connector for a disconnectable charger for the Battery pack. Can be integrated on the esense Enclosure. Mounting options Included fixation material Protection grade Cable length (LA) Through hole 2 x Socket cap screw, washer and nut M3 IPx2 (When cover is closed) 0,3 m 23
5.3 Accessory parts Art. number E1107-2010 Mounting Set 360 Set of two brackets to mount Driveunit 360 on the bottom of a mobile product. Amount One set consists of two brackets Included fixation material Weight 4 x DIN912 Socket head screw M8x20 4 x DIN128A Ring M8 1.0 Kg Art. number E1409-1510 Charger Bracket Mounting bracket for the esense Battery Chargers Material Coated steel Mounting options 3 x M6 Included fixation material - 24
Art. Number E1106-8000 Mechanical Wheel Lift Mechanism to lift the Drivewheel of Driveunit Fixed or 360 manually in case of emergency. Mounting Included fixation material Material Can be installed on both Driveunits without disassembly of the unit 2 x Hexagon head screw M6x40 Zinc plated steel Art. Number E1107-2032 Handle End Plugs Set of end plugs to close the end of the Sensor handles when these are mounted on open tube. Amount Mounting Included fixation material Material Each set consists of 10 plugs Push in None Ld-PE 25
Art. Number E1107-2530 Magnet Key Key ring magnet. For use to lock and unlock drive functionality on esense UI 2 to prevent unauthorised use. Amount Each set consists of 10 magnets Art. Number E1409-2300 External mini USB USB extension cable to build an external mini USB connector on the E1409-1100 esense Enclosure. Mounting options Cable length (LA) Protection grade Art. Number Through hole, max. panel width 6.2 mm 0.35 m IP68 CAB027 Fixed Wheel Extension Cable Extension cable to create additional length between the Controller Box and Driveunit Fixed. Cable length (LA) 1.5 m Art. number CAB073 Battery - Main 2 Cable to connect alternative batterypacks to the esense Controller box. Cable length Art. number 0.25 m CAB112-L1 26
Immobilizer - Main IO Suited to connect external switches to the Controller Box in order to enable and disable the electric drive support. Length (LA) Art. number 2 m CAB113-L1 Ground Wire Optional ground wire to ground the esense Enclosure in case the standard ground plate is not applicable. Cable length (LA) 0.10 m 27
6 Spare parts overview Primary component E1106-4000 Driveunit Fixed E1106-1000 Driveunit 360 Spare part 1 E1106-0666 Drivewheel Primary component E1409-2000 esense UI 2 Spare part 1 2 3 4 5 6 7 8 E1409-2500 UI 2 Controller E1409-2520 IP Seal EPDM Controller (set of 10) E1409-2540 IP Seal EPDM Back Cover (set of 10) E1409-2600 UI 2 Waterproof Cover E1409-2200 EMO Switch With Cable L3 E1409-2510 Dust Cover USB (set of 10) E1409-0100 esense Membrane Foil E1409-2640 Gland 3way UI 2 28
Primary component E1107-2000 Sensor Handle Spare part 1 E1107-2031 Handle Cap (set of 10) Primary component E1409-1450 Charge Connector With Cover Spare part 1 E1409-1460 Charge Connector Cover (set of 10) 29
7 Installation tools Art. Number E1107-0020 Sensor handle alignment tool Set of two plastic tools for easy alignment of E1107-2030 Sensor Handle around a tube. Art. Number E1409-0310 Hole position tool Tool to position drill holes for cable gland installation on the side or back of E1409-2600 UI 2 Waterproof Cover Art. Number E1409-0315 Expanding pliers Tool for easy installation of cables in the cable gland inserts for E1409-2600 UI 2 Waterproof Cover 30
8 Connection schemes 8.1 esense Fixed Dotted components and cables are optional or available only in esense Power and esense Box systems. 31
8.2 esense 360 Dotted components and cables are optional or available only in esense Power and esense Box systems. 32
9 System specification Use environment Ambient use temperature (Systems including Batterypack) Charging Discharging (Power assisted driving) Storage temperature (Systems including Batterypack) Up to one week Longer period Charge time for full charge (Systems including Batterypack) Action radius on full battery (Systems including Batterypack) Drivewheel functionality when powered off Max. assisted speed Max. wheel torque continuous Max. wheel torque short Max. slope angle (At trolley weight up to 400 kg) Max. threshold Average braking distance at release of trolley sensor handles* Average braking distance for active braking* Protection rating of external components Sensor handles User Interface 2 Driveunit 360 Driveunit Fixed esense Enclosure Average power consumption Standby Rest Horizontal plane/ acceleration* Horizontal plane/ constant speed At max. torque The esense Driveunits are suited for indoor use only on hard (solid), dry and clean industrial surfaces. 10 to 40 C -20 to 50 C -20 to 60 C -20 to 35 C 4.5 h > 15 km Freewheel No parking brake Up to 6 km/h (Default 4.5 km/h) 15 Nm > 30 Nm 6 20 mm 1.6 m 0.8 m IPx5 IPx4 IPx3 IPx4 IPx4 < 0.5 W < 2.5 W 72 W 24 W 480 W/ max. 10 seconds 360 W/ max. 5 minutes 240 W/ continuous * Standard setting. May be changed for specific trolleys. ** All measured at speed accelerating to app. 2.5 km/ h. Total weight of trolley and load 400 kg. 33
10 Compliance The esense system is a 24 V DC powered add-on system for food or health care facility transport trolleys. The essential requirements of EC Machinery Directive 2006/42/EC have been applied and fulfilled. The following applicable safety standards have been applied and fulfilled: EN-IEC 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements EN-ISO 13849-1 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design The following applicable requirements of EMC Directive 2004/108/EC have been applied and fulfilled: EN61000-6-1 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environment EN61000-6-3 Electromagnetic compatibility (EMC) - Part 6-3: Generic Standards - Emission standard for residential, commercial and light-industrial environment. The relevant technical documentation has been compiled in accordance with Annex VII, Part B of EC Machinery Directive 2006/42/EC. The partly completed machinery must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with the provisions of the Machinery Directive. 34
11 Distribution and authorization list Author Department Date Approval Erik Woldring Indes Design & Engineering 20170906 12 Revision list Revision Definition Date 0.01 First draft version. 20161108 1.00 First version. Released for Medica 2016 only. 20161111 2.00 Version still under construction but available to selected contacts 20161124 3.00 First complete version, only excluding spare parts. Available for general communicaton. 3.01 Added component weights, changed color of esense box and corrected charge plug article code. 4.00 Changed company name, corrected spare part numbers and spare part amounts and added spare parts overview. 20161202 20161213 20170117 5.00 Removed warranty chapter 20170125 6.00 Name changed to esense 9000 article overview 20170201 7.00 Updated spare parts overview, added magnet key and added available tools chapter, updated build height of DriveUnit Fixed. Corrected specs of chargers and central force sensor. Changed order of articles. 8.00 Updated charger specs and pictures. Update article number of batterypack in schemes. Added CAB073. Updated list of documentation. 9.00 Added Glands as alternative and spare parts. Added external mini USB cable. Changed Sensor Handle article number. Removed Sensor Handle spare parts. 10.00 Added Chapter 4 with ordering examples. Other chapters shift one number. 20170906 20171124 20180430 20180515 13 esense documentation Article overview E1409_yyyymmdd_esense 9000 article overview_rx.yy Installation and service manual E1409_yyyymmdd_esense 9000 installation and service manual_rx.yy User manual E1409_yyyymmdd_esense 9000 use manual_rx.yy Troubleshoot guide E1409_yyyymmdd_esense 9000 troubleshoot guide_rx.yy All documentation is available in English. 35
esense is a product by: Indes Production Management Pantheon 28 7521 PR Enschede PO box 265 7500 AG Enschede The Netherlands T +31 (0)53 4803920 E info@esense-moves.com W esense-moves.com Document ID: E1409_20180518_esense 9000 article overview_r10.00 36