Evidence Handling and Firearms Storage Systems
TABLE OF CONTENTS Anatomy of an Evidence Locker.......... 2 Standard Evidence Lockers............. 3 A.C.C.E.S.S. 500...................... 5 Refrigerated Evidence Lockers........... 7 Gun Storage Lockers.................. 9 Safety Boxes....................... 11 Personnel Duty Lockers............... 13 "Property evidence has traditionally been buried in the basement, ignored and in some cases the victim of neglect." Excerpt from an article entitled Property Room Procedures published by Law and Order magazine The words missing and tampering" have been used all too frequently when describing the handling of evidence. DSM Evidence Handling Systems have been designed to ensure that deposited evidence remains within the "Chain of Custody" until removed and processed into the property room by authorized personnel. TESTIMONIALS When we were remodeling our Property Room, we looked at several different Locker Vendors. We wanted to let you know how pleased we are that we chose your locker company as our locker supplier. We were able to select the lockers that were best suited for our department's use due to the wide selection of locker opening sizes and different configurations to select from.the quality of the lockers is by far the best we have seen. Escondido Police Department, California Upon the recommendation of their Chief of Police, the city council City of Elmira approved DSM Law Enforcement Products to be the sole supplier of their standardized evidence lockers. City of Elmira, New York DSM Law Enforcement Products is fully committed to satisfying the needs of Law Enforcement Agencies. Design flexibility has been incorporated into all of our basic Heavy Duty Locker Systems, allowing upgrade features to be installed on site at a future date. Value conscious end users know that their investment will remain current and provide many years of trouble free service. The DSM name on a locker assures buyers that they are purchasing the best in evidence and firearm locker security systems second to none. DSM is a Canadian company, owned and operated by the founding family since 1972. www.dsmlawenforcement.com
Anatomy of an Evidence Locker Materials: Exterior components are constructed of 16 gauge cold rolled steel.the base is 14 gauge and all inner skins are 18 gauge. Only the highest quality fasteners and hardware are utilized. Welding: Our certified welders use resistance or MIG welding where appropriate. All exposed corners are welded solid and smoothed prior to finishing. The base is fully welded to the cabinet creating a solid structure. Cabinet: DSM evidence lockers are modular and are shipped as a fully assembled unit. Modules measure 82 high x 36 wide x 24 deep. For ease of installation, all lockers have pre-drilled mounting holes and floor levellers. A wide range of standard locker configurations gives the flexibility needed when designing an efficient, secure evidence handling area. Hinges: Heavy-duty, continuous type hinges are welded to each door, with never more than 3 inches between welds. One end of every hinge is welded to prevent pin removal. Doors: All locker doors are built with 16 gauge (1/16" nom. thickness) cold-rolled steel. All corners are welded and ground smooth prior to painting. 18 gauge interior door skins add even more rigidity, while concealing the mechanical elements of the door. The strength of larger doors is further enhanced by the addition of a spot-welded reinforcement along the length. Front door handles are recessed to avoid injuries and catching of clothing. Self-closing devices prevent open doors from being a hazard in corridors and hallways. Doors have multiple locking points and can only be removed in the open position. Rear doors are full cabinet size, providing access to multiple compartments. Neoprene silencers, riveted number tags and instruction tags on doors are just a few of the finer details that set DSM apart from the crowd. Model #07 Finish: All surfaces are smoothed and polished, then phosphate treated, prior to the application of a high quality powder coat finish. BACK TRIM WALL BOLT UNITS TOGETHER All corners are welded solid and ground smooth prior to powder coating. FRONT TRIM Toll Free 1-866-276-0445 2
Standard Evidence Lockers Features Fully assembled and ready for use No Key or combination needed for evidence deposit Available in Pass-thru or Non Pass-thru Recessed chrome handles Number and operating instruction tags on each door Self-closing doors Attached base Pass-thru Models Model #17 Model #02 Model #04 Model #07 3 www.dsmlawenforcement.com
Standardized modules (82 H x 36 W X 24 D) Nevada Beige powder coat finish Adjustable floor levelers DSM Keyless Push Button Lock TM Single full size rear door Front and rear trim kits Available Options Front door lockout system for evidence removal Alternate specialized locks Mail or video slot Rear mesh door Refrigerated insert (in selected models) Non Pass-thru Models Model #11 Model # 06 Different finish colors MANUFACTURER S LIMITED WARRANTY For a period of 4 years from receipt of the product, DSM Law Enforcement Products will repair or replace, at no cost to the customer, any product that is or becomes defective through normal use. Endorsed by the INTERNATIONAL ASSOCIATION FOR PROPERTY AND EVIDENCE, INC. Toll Free 1-866-276-0445 4
A.C.C.E.S.S 500 T.M. Audited Computer Controlled Evidence Storage System Designed and developed by DSM, A.C.C.E.S.S. 500 raises the benchmark in evidence handling, today and into the future. Audit control for all evidence lockers is now available. 24 hrs a day / 7 days a week unattended access Available as Pass-thru or Non Pass-thru Computerized tracking and monitoring of all locker activity Multiple levels of security available Doors locked at all times Access card, pin number, or both required to deposit evidence Depositor is denied access to secured evidence Evidence removal by authorized personnel only Expandable to accommodate unlimited numbers of doors INTERIOR OF CONTROLLER Multiple location monitoring Windows T.M. based software Set-up and training on-site Standardized modules (82 H x 36 W X 24 D) 5 DSM together with KEYSCAN, the North American leader in design and manufacturing of Access Control Systems, worked to develop the unique software for the A.C.C.E.S.S 500. www.dsmlawenforcement.com
THE SMART LOCKER C US CERTIFIED TO U.S. STANDARDS Custom Unit Controller A.C.C.E.S.S. CONFIGURATIONS compatible with most card reader systems 12" 503 504 507 512 513 BACK VIEW BACK VIEW 507 CONTROLLER Toll Free 1-866-276-0445 5 6
Refrigerated Evidence Storage Lockers Standard Features Fully assembled and ready for use Stainless steel interior throughout Maintains controlled temperature of 38 F 42 F LED digital temperature display Temperature sensitive audible alarm Keyless lock prevents re-access by depositor Available in Pass-thru or Non Pass-thru Magnetic seals on front and rear doors Adjustable floor levelers Plug-and-go operation 36" Model RS24 4 24 compartments in various sizes Standard module size (82 H x 36 W x 24 D) Approx. weight: 700 lbs 29 3 /8" 47 3 /4" 82" RS24-4 RS24-6 RS24-8 RS24-10 FRONT VIEW RS24-12 RS24-9 RS24-15 RS24-18 INTERIOR COMPARTMENT DOOR CONFIGURATIONS RS24-24 7 www.dsmlawenforcement.com
RSD4 Module Designed to fit into any lower D size opening of our standard lockers Can be installed on-site into existing DSM lockers 4 lockable compartments EDLC-10 / RSD4 Model RSD4-SA Stand-alone version of the RSD4 above Size (44 H x 18 3 /4 W x 24 D) Approx. weight: 250 lbs C US Digital Control CERTIFIED TO U.S. STANDARDS Toll Free 1-866-276-0445 8
Gun Storage Lockers Handgun Lockers to satisfy any lock-up needs in sally-port and other secure locations Seven standard sizes to choose from Available as flush or surface mount models Door openings 5 3 /16 x 10 3 /8 Welded construction 1/8 neoprene lining on shelves 1 1 / 2 trim surround on flush mount models Pre-drilled mounting holes c/w hardware Locks keyed to differ and master keyed Model Model No. of Cabinet Dimensions Shipping Size of Wall Opening Number Type Compartments Width Height Depth Weight Width Height Depth HGF 02V FLUSH 2 13" 14 1/8" 6 1/2" 20 lbs 13 1/2" 14 1/2" 6 1/2" HGF 03V FLUSH 3 13" 20 1/8" 6 1/2" 27 lbs 13 1/2" 20 1/2" 6 1/2" HGF 04V FLUSH 4 13" 26 1/8" 6 1/2" 31 lbs 13 1/2" 26 1/2" 6 1/2" HGF 04 FLUSH 4 25" 14 1/8" 6 1/2" 32 lbs 25 1/2" 14 1/2" 6 1/2" HGF 06 FLUSH 6 25" 20 1/8" 6 1/2" 53 lbs 25 1/2" 20 1/2" 6 1/2" HGF 08 FLUSH 8 25" 26 1/8" 6 1/2" 59 lbs 25 1/2" 26 1/2" 6 1/2" HGF 10 FLUSH 10 25" 32 1/8" 6 1/2" 82 lbs 25 1/2" 32 1/2" 6 1/2" HGS 02V SURFACE 2 13" 14 1/8" 6 1/2" 17 lbs N/A HGS 03V SURFACE 3 13" 20 1/8" 6 1/2" 24 lbs N/A HGS 04V SURFACE 4 13" 26 1/8" 6 1/2" 28 lbs N/A HGS 04 SURFACE 4 25" 14 1/8" 6 1/2" 29 lbs N/A HGS 06 SURFACE 6 25" 20 1/8" 6 1/2" 49 lbs N/A HGS 08 SURFACE 8 25" 26 1/8" 6 1/2" 55 lbs N/A HGS 10 SURFACE 10 25" 32 1/8" 6 1/2" 78 lbs N/A 9 www.dsmlawenforcement.com
HG20C SG85C Your choice of hand gun, shot gun or combination lockers to satisfy the needs of all law enforcement agencies. All compartment doors are individually numbered and all shelves are lined with 1/8"neoprene. Lockers may be ordered with keyed or combination locks. 34" 34" 34" 74" 74" 51" Single master door opens for inspection or removal of contents and is available with keyed or combination lock. 11" HG20C SG85C HG10C Toll Free 1-866-276-0445 10
Safety Boxes Long gun and accessory cabinets come fully assembled and ready for use. All welded 16 gauge steel construction Keyed lock and padlock hasp Textured, black powder coat finish Pre-drilled mounting holes c/w hardware Foam stock and barrel rests Model Capacity Size (L x W x D) Weight GC 4 4 Long Guns 55"x 10"x 8" 50 lbs GC 6 6 Long Guns 55"x 16"x 9 1/2" 72 lbs GC 8 8 Long Guns* 55"x 20"x 12" 90 lbs GC 12 12 Long Guns* 60"x 20"x 16" 105 lbs AB 16 Accessory Box* 16"x 16"x 9 1/2" 25 lbs AB 20 Accessory Box* 20"x 20"x 12" 30 lbs Portable Gun Boxes PGB *Includes 1 adjustable shelf These dynamic, portable gun boxes are designed for secure storage and transportation of firearms. Tested and approved by a federal agency. Retractable carrying handle Fully welded construction Keyed and padlock-ready Hand-washable cushioned liner Black textured powder coat finish Optional retainer c/w hardware Model Size (L x W x D) Weight Retainer Weight PGB 1194 11 1/2"x 9"x 3 1/2" 9 lbs GBR 1194 11 lbs PGB 1594 15 1/4"x 9"x 3 1/2" 11 lbs GBR 1594 13 lbs PGB 1596 15 1/4"x 9"x 6 3/4" 13 lbs GBR 1596 15 lbs Model # PGB 1596 GBR 1194 Retainer 4.0" 11 15.0" 9.25" www.dsmlawenforcement.com Model # PGB 1194
Safety Box II ORDER ON-LINE! Features: The Heavy Duty Safety Box II is portable, multi-purpose and economical. These no-nonsense footlockers are designed to deter forced entry and can be mounted in the trunk of a car, closet, office or anywhere that secure storage is required. Options: PL 52-5 Optional Padlock 5/16" hardened steel shackle Biaxial key cut UL 437 listing Heavy welded steel construction Grey powder coat finish Hardened steel padlock hasp Steel mounting plate c/w hardware Pre-scored foam block insert MEDECO Padlock Model Size (L x W x D) Handle Hasp Divider Weight Mounting Plate Foam Insert FL 138300 13"x 8"x 3" One One Yes 12 lbs MP 138300 FI 138300 FL 138301 13"x 8"x 3" One One No 12 lbs MP 138300 FI 138300 FL 138500 13"x 8"x 5" One One Yes 15 lbs MP 138500 FI 138500 FL 138501 13"x 8"x 5" One One No 15 lbs MP 138500 FI 138500 FL 161280 16"x 12"x 8" One One No 25 lbs MP 161280 FI 161280 FL 171760 17"x 17"x 6" Two One No 25 lbs MP 171760 FL 171760 FL 201480 20"x 14"x 8" Two One No 32 lbs MP 201480 FI 201480 FL 241812 24"x 18"x 12" Two Two No 54 lbs MP 241812 FI 241812 Toll Free 1-866-276-0445 12
Personnel Duty Lockers 13 All DSM duty lockers are designed with deep storage space for larger equipment. The generous 24" depth together with the standard coat hanger bar means uniforms stay neat and orderly. All doors are double vented to provide additional air circulation. www.dsmlawenforcement.com
Fully assembled and ready for use Full 24 depth Coat hanger bar Rigid welded construction Nevada Beige powder coat finish Available in 18", 24" or 36" widths Available Options Custom interiors Full extension drawers Electrical knockout MEDECO padlock Mesh doors Sloped top 4" base Different finish colors 24" model with standard interior To provide years of trouble free service, all PDL series lockers feature the DSM Liftlatch system. Toll Free 1-866-276-0445 36" model with custom interior 14
Standard Configurations B B D B E E E D E C D D A 01 02 03 04 05 06 E D E G B E B E E F G F F C F A A A D 07 08 09 10 11 12 18 3 /4" E G A G E E F F H F C D A D 13 14 15 16 17 20 21 36" J 19 40" RSD4 REFRIG. INSERT RS24 REFRIGERATION UNIT 36" 24" I REAR VIEW MODELS 1-17 82" SIDE VIEW ALL MODELS DOOR SIZES A 33" X 36 3/4" B 15 3/4" X 75" C 15 3/4" X 55 7/8" D 15 3/4" X 36 3/4" E 15 3/4" X 17 5/8" F 15 3/4" X 8 13/16" G 10" X 17 5/8" H 7 1/8" X 55 7/8" I 33" X 75" (REAR DOOR) J 33" X 33" NOTE: Products shipped may not appear exactly as shown in catalog due to ongoing development and improvements. DSM rev.02/03 LAW ENFORCEMENT PRODUCTS 14 Robb Boulevard, Orangeville, Ontario L9W 3L2 Tel: 1-866-276-0445 Fax: (519) 941-4184 e-mail: sales@dsmlawenforcement.com web: www.dsmlawenforcement.com Graphic Design: Stonecroft Design Ltd.