MBL MOTION SOLUTIONS TILT/LIFT SYSTEM LIFT SYSTEM TILT SYSTEM LINEAR ACTUATORS
QUALITY IS IN THE DETAIL.
page 6 8 12 14 16 18 content TILT/LIFT system TILT system LIFT system Linear actuator Q1 Linear actuator U1 Linear actuator T0 Other products for powered wheelchairs
4
Our universal and compact Tilt/Lift, Lift and Tilt systems have optimal measurements and specifications to be built into powered wheelchairs. The systems comply with the market s standard control systems. MBL MOTION SYSTEMS 5
TILT/LIFT The MBL Tilt & Lift System is a universal, combined and compact tilting and lifting unit. It supports up to 220 kg load with 88 mm build in height where the lifting range is 300 mm and the tilting angle is up to 55. Our standard configuration realizes 300 mm lift and several tilt angles of 30, 45, 50 and 55. The unit includes standard build in actuators equipped with internal limit switches. As an option they can be configured with adjustable inhibit switch and/or analogue feedback for positioning. It is also possible to use different cable tracks. 6
FEATURES Load capacity: Minimal install height: Max lift stroke: Max tilt angle: Unit weight: Power supply: Current consumption (full load): Feedback: Switches: IP-class: Connection: Cable routing: 200 (55 ) - 220 kg (30-50 ) 88 mm 300 mm 30-55 < 30kg 24V DC 4 (+/-0,5) A Optional analogue potentiometer Inbuilt at actuator, optional inhibit switch IP21 2 x 200 mm cable with female Molex plug 39-01-2025 Optional cable track DIMENSIONS 88 300 330 55 266 266 130 355 0 Center of Load 500(without cover) 7
TILT The MBL Tilt System is a universal and compact tilting unit with configurable tilting angles from 30 to 55. The load capacity depends of the design tilt angle and can vary from 200 kg (55 ) to 250 kg (30 ) and maintain an 76 mm build in height. Our standard configuration realizes tilt angles of 30, 45, 50 and 55 with a maximum load capacity of 200 kg. The system includes a standard build in actuator equipped with internal limit switches. As an option it can be configured with adjustable inhibit switch and analogue feedback for positioning. 8
FEATURES Load capacity: Minimal install height: Max tilt angle: Unit weight: Power supply: Current consumption (full load): Feedback: Switches: IP-class: Connection: 200 kg (55 ), 220 kg (50,45 ), 250 kg (30 ) 76 mm -78 mm 30, 45, 50 or 55 13 kg 24V DC 4 (+/-0,5) A Optional analogue potentiometer Inbuilt at actuator, optional inhibit switch IP21 200 mm cable with female Molex plug 39-01-2025 DIMENSIONS 55 478 (with cover 483mm) 266 69 387 280 78 Center of Load 9
LIFT The MBL Lift System is a universal and compact lifting unit. It supports 220 kg of load with 77,5 mm build in height. Our standard configuration realizes 300 mm lift and includes a standard build in actuator equipped with internal limit switches. As an option it can be configured with adjustable inhibit switch and/or analogue feedback for positioning. It is also possible to use different cable tracks.
FEATURES Load capacity: Minimal install height: Max lift stroke: Unit weight: Power supply: Current consumption (full load): Feedback: Switches: IP-class: Connection: Cable routing: 220 kg 77,5 mm 300 mm 16 kg 24V DC 4 (+/-0,5) A Optional analogue potentiometer Inbuilt at actuator, optional inhibit switch IP21 200 mm cable with female Molex plug 39-01-2025 Optional cable track DIMENSIONS 266 118 280 300 Center of Load 77,5 470 (without cover) 488(without cover) 11
Q1 The Q1 is a very compact yet powerful actuator. It is well suited for all applications where the build-in space is limited such as, seat-lifts, lift-chairs and wheelchair lifting devices. The Q1 is very silent as it contains a high quality Italian engine. The actuator can be controlled by all known 3rd party controllers on the market and it can be equipped with a linear potentiometer which allows us to know the precise position of the piston at any time. FEATURES Dynamic force: Static force: Max. speed (full load): Max. speed (no load): Min. installation dimension: Min. stroke: Stroke lengths (mm): IP-class: Current consumption (full load): Current consumption (no load): Feedback & switches: Motor: Mounting brackets: Connection: Operating temperature: Storage temperature: Housing: Piston: Colour: Duty cycle: 6000 N 6000 N 3,5 (+/-0,5) mm/s 4 (+/-0,5) mm/s 160 mm + stroke 45 mm 90, 95, 0, 5, 1 or 115 IP21 4 (+/-0,5) A 0,8 (+/-0,5) A Mechanical limit switch 24V DC permanent magnet motor mm; Angle for piston bracket: 0-360 Cable 0,2m 2 x 0,75 mm2 (with Molex plug) +5 to +40 C -40 to +70 C Aluminium Stainless steel Black and silver %, max. 2 minutes at continuous use followed by an 18 minutes rest 12
DIMENSIONS stroke 98 (+/-1) 291 (+/-1) 156,1 stroke 98 (+/-1) 291 (+/-1) 156,1 11 72,3 11 72,3 60,3 60,3 22 22 131,1 131,1 60 60 24 24 24 11 11 24 11 PERFORMANCE 25 25 11 4,5 Speed (mm/s) Current (amp) 4,5 4 4 3,5 3,5 3 3 2,5 2,5 2 2 1,5 1,5 1 1 0,5 0,5 0 00 2000 3000 4000 5000 6000 Force (N) The *Charts chart shows average the average figures figures for a for 24V a actuator 24V actuator using using a stabilized a stabilized power power supply. suply OPTIONS Stroke length: Cable and connector: Mounting brackets: Piston: Coating colour: Feedback and switches: Customizable Customizable Plastic or steel slide bearings Angle: 90, 180 or 270 Customizable Adjustable Limit switches/linear potentiometer 13
U1 The U1 is a powerful yet silent actuator. The design is compact which makes it optimal for constructions where space is limited - for example in powered wheelchair applications. The aluminium construction makes it very light. This actuator is high self-locking load. FEATURES Dynamic force: Static force: Max. speed (full load): Max. speed (no load): Min. installation dimension: Min. stroke: Stroke lengths (mm): IP-class: Current consumption (full load): Current consumption (no load): Feedback & switches: Motor: Mounting brackets: Connection: Operating temperature: Storage temperature: Housing: Piston: Standard colour: Self-locking: Duty cycle: 4000 N 4000 N 4 (+/-0,5) mm/s 4,5 (+/-0,5) mm/s 135 mm + stroke 45 mm 80 mm, 85 mm, 90 mm, 95 mm IP21 3,5 (+/-0,5) A 1,5 (+/-0,5) A Mechanical limit switch 24V DC permanent magnet motor. mm; Angle for piston bracket: 0-360 Cable 0,2m 2x0,75mm2 (with Molex plug) +5 to +40 C -40 to +70 C Aluminium Stainless steel Black and silver High self-locking load %, max. 2 minutes at continuous use followed by an 18 minutes rest 14
DIMENSIONS 231(+/-1) stroke 93 (+/-1) 84 37 68 22 22 43 43 231(+/-1) stroke 93 (+/-1) 84 68 22 22 37 24 11 160 31 11 24 11 160 PERFORMANCE 31 11 5 4,5 Speed (mm/s) Current (amp) 5 4,5 4 4 3,5 3,5 3 3 2,5 2,5 2 2 1,5 1,5 1 1 0 500 00 1500 2000 2500 3000 3500 4000 Force (N) The *Charts chart shows average the average figures figures for a for 24V a 24V actuator actuator using using a stabilized a stabilized power power supply. suply OPTIONS Stroke length: Cable and connector: Mounting brackets: Coating colour: Feedback and switches: Customizable Customizable Plastic or steel slide bearings Customizable Adjustable Limit switches / Linear potentiometer 15
T0 The T0 is a powerful inline actuator designed for rehabilitation applications, but it can also be used in other applications demanding the smallest overall dimensions and linear design. The T0 is very light and compact which makes it perfect for powered leg-rests. STANDARD FEATURES Dynamic force Static force Max speed (full load) Max speed (no load) Min installation dimension Stroke lengths (mm) IP-class Current consumption (full load) Current consumption (no load) Feedback & switches Motor Mounting brackets Connection Operating temperature Storage temperature Housing Piston Standard colour Self-locking Duty cycle 00 N 2000 N 4,0 mm/s 7,5 mm/s 170 mm + stroke Customizable IP52 1,2 (+/-0,5) A 0,5 (+/-0,3) A Switching off by the controller (by current 1,8 A) 24V DC motor with planetary gear mm (motor side) and 8,2 mm (piston side) angle for piston bracket: 0-360 Cable 0,2 m 2 x 0,5 mm2 (with Molex plug) +5 to +40 C -40 to +70 C Aluminium Galvanized steel Black and silver Self-locking %, max. 2 minutes at continuous use followed by an 18 minutes rest 16
DIMENSIONS stroke75(+/-1) 244(+/-1) 8,2 28 36,3 18 18 8,50 8,50 95 112 29 PERFORMANCE 8 Speed (mm/s) Current (amp) 3 7 2,5 6 2 Speed 5 1,5 Current 4 1 3 0,5 2 0 0 200 400 600 800 00 Force (N) The chart shows the average figures for a 24V actuator using a stabilized power suply OPTIONS Stroke length: Cable and connector: Speed: Push force: Mounting brackets: Coating colour: Customizable Customizable Customizable by changing engine Customizable by changing engine Plastic or steel slide bearings Customizable 17
WHEELS AND OTHER PRODUCTS FOR POWERED WHEELCHAIRS Please visit our webpage or contact our sales department if you would like to know more about our products and solutions for powered wheelchairs. 200 X 50 2.80/2.50-4 3.00-8 18
PLEASE FIND OUR FULL RANGE OF PRODUCTS ON MBL.DK
About MBL The MBL Group was established in Denmark in 1988. Today, we are a leading supplier of components and customer specified solutions for the wheelchair industry and more than 1,600 people are employed in our 40.000m 2 production facilities in Poland and China. MBL manufactures an extensive range of quality products for the wheelchair industry, including rear wheels, pushrims, front forks, bearing housings, hubs, quick-release axles, foot rests, hand brakes, textiles, rubber tyres, polyurethane tyres and the unique puncture proof solutions; FlexLite and Flexel. We also offer a comprehensive range of quality ramps in aluminium. Our standard products have all been developed through our well defined R&D process. They are tested according to relevant industrial standards to ensure they meet all quality and durability requirements, and they are ready for production upon order. www.mbl.dk MBL DENMARK MBL a/s Glarmestervej 18 B, St. Th. 8600 Silkeborg Tel.: +45 86 80 28 00 Contact@mbl.dk MBL POLAND MBL Poland Sp. zo. o. Ul. Sulejowska 45d 97-300 Piotrkòw Trybunalski Poland Tel.: +48 44 73 24 0 Fax: +48 44 73 24 200 Contact@mbl.pl MBL CHINA MBL (Xiamen) Co. Ltd. No. 289 Wengjiao Road Xinyang Industrial District Haicang 3612 Xiamen China Tel.: +86 592 596 1896 Fax: +86 592 596 1895 Contact@mbl.com.cn Your contact at MBL: a/s