Grass King Rev 05- PART'S MANUAL Boom Arm Mower Part No. 09650P An Operator's Manual was shipped with the equipment in the Manual Canister. This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator's Manual is not with the equipment, contact your dealer or Alamo Industrial (00-56-66) to obtain a Free copy before operating the equipment. ALAMO INDUSTRIAL 50 E. Walnut Seguin, Texas 755 0-7-55 0 Alamo Group Inc.
To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense! WARRANTY INFORMATION: Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full and return it within 0 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the Warranty Form that you retain. The use of "will-fit" parts will void your warranty and can cause catastrophic failure with possible injury or death.
TORQUE Mounting procedures for mowers will require a significant amount of bolt nut and washer installation. Frame and structure mounting bolts should be installed using Red Loctite, and torqued to the dry values listed in the torque chart based on the bolt size and hardness. Other structures such as pump mounting bolts should be installed with Blue Loctite and torqued to the dry values indicated in the chart. Bolt tightness should be completed with and checked with a suitable torque wrench. Torque checks should be completed throughout the life of the mower in accordance with the maintenance chart provided in this manual. Loose bolts on a frame or in a casting may be a result of: Vibration from the mower due to imbalance of the mower blades Pulled threads due to over tightening Distortion of the hole due to under tightening during installation Bolts broken or sheared in the mounting structure or tractor may be the result of: Improper alignment of the Mounting Plate or Structure such that it is not sitting flat on the mating surface Distortion of the bolt due to over-tightening Under tightening of the bolts Check the bolt torque during installation and prior to delivery with a suitable torque wrench.
Parts Section PARTS SECTION
PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section.. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required.. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered.. The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part.. The Manufacturer reserves the right to substitute parts where applicable. 5. Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase Order. 6. The Manufacturer reserves the right to change prices without prior notice. For maximum safety and to guarantee optimum product reliability, always use genuine Alamo Industrial Parts. The use of inferior replacement parts may cause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to: ALAMO INDUSTRIAL 50 E. Walnut Seguin, Texas 755 0-79-0 0 Alamo Group Inc. Parts Section
PART NAME INDEX GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
6 IN MOWER ASY (PART ) GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
6 IN MOWER ASY (PART ) Continued... ITEM PART NO. QTY. DESCRIPTION 075 CUTTER HOUSING, RH - 6" 096506 HYDRAULIC MOTOR ASY, FWD.ROT. 09650 HYDRALIC MOTOR ASY, REV. ROT. 065 MOTOR MOUNT PLATE, FWD.ROT. + 069 MOTOR MOUNT PLATE, REV.ROT. 007 5 000000 LOCKNUT 6 0009600 LOCKWASHER 7 00067 PULLEY 0076 HUB 9 00070 V-BELTS - MATCHED PAIR 0 0659 IDLER ARM RIGHT WLD`MT, - FWD. ROT. @ 0657 IDLER ARM RIGHT WLD`MT, - REV. ROT. 005 IDLER PULLEY 077 IDLER BEARING SPACER 00059 SPRING,EXTENSION + 00000 000700 LOCKWASHER @ 7077 IDLER ASY., RH - FWD. ROT. 7005 IDLER ASY., RH - REV. ROT. 00006 NO. RED LUBRICAP 0790 BELT GUARD WLD`MT, RH - FWD.ROT. 079 BELT GUARD WLD`MT, RH - REV.ROT. + 00500 00000 FLATWASHER 0066 LOCKWASHER @ 7075 GUARD SUPPORT - TOP + 00756 007506 LOCKNUT 5 0065 CUTTERSHAFT PULLEY 6 005 IDLER PULLEY 7 0767 WASHER 0005 LOCKWASHER 9 00007 0 70695 CUTTERSHAFT BEARING ASY. @ 005 CUTTERSHAFT BEARING 0776 ROLLER, WLD`MT - 6" @ 706 ROLLER KIT - 6" + 00056 CARRIAGE 066900 CARRIAGE 000000 LOCKNUT GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -5
6 IN MOWER ASY (PART ) GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -6
6 IN MOWER ASY (PART ) Continued... ITEM PART NO. QTY. DESCRIPTION 9 07 CUTTERSHAFT, WLD`MT - 6" 0 00759 7 KNIFE 0 7 KNIFE 0076 6 RING 0670 6 PIN 066700 6 COTTER PIN 7 005 SHOE/WEAR PLATE 06900 CARRIAGE 9 000700 PLOW # 000700 6 LOCKWASHER 0 7079 IDLER PIVOT PIN, W/ GREASE FITTING @ 0005 GREASE FITTING 00006 NO. RED LUBRICAP 707 CUTTERSHAFT BEARING ASY. @ 7069 BEARING ASY, W/ SETSCREW 5 00756 6 7 007506 6 LOCKNUT 0000 6 9 000 6 LOCKWASHER 50 006 FENDER 5 007 5 000700 5 00000 NUT 55 0 GEARBOX MOUNT 56 005000 9 57 00000 9 FLATWASHER 59 09599 9 LOCKNUT 60 0755 FOOT GUARD WLD`MT, 6" 6 000700 6 000 6 00097 @ 007 6 0009600 LOCKWASHER 65 000000 HEX NUT 7 70575 ROLLER BEARING ASY. - KEYED 70976 ROLLER BEARING ASY. - HEX 070 HOUSING 7 7057 BEARING PKG ASY., W/ SETSCREW 006 REAR ROLLER BEARING, W/ HEX BORE 7 0009 GREASE FITTING 7 0007 SEAL GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -7
6 IN MOWER ASY (PART ) GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
6 IN MOWER ASY (PART ) Continued... ITEM PART NO. QTY. DESCRIPTION 75 00056 CARRIAGE 76 09790 LOCKNUT 77 075 ROLLER BRKT, LEFT 7 070 ROLLER BRKT, RIGHT 79 067 TRASH DEFLECTOR, - FRONT 0 00060 9 00000 9 FLATWASHER 09599 9 LOCKNUT @ 706 ROLLER BRG/BRKT ASY., LH 70596 ROLLER BRG/BRKT ASY., RH GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -9
7 IN MOWER ASY (PART ) GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -0
7 IN MOWER ASY (PART ) Continued... ITEM PART NO. QTY. DESCRIPTION 0756 CUTTERHOUSING, WLD`MT - RH 7" 096506 HYDRAULIC MOTOR ASY. 096500 HYDRAULIC MOTOR ASY. - REV.ROT. 065 MOTOR MOUNT PLATE + 069 MOTOR MOUNT PLATE, - REV.ROT. 007 5 000000 LOCKNUT 6 0009600 LOCKWASHER 7 00067 PULLEY 0076 HUB 9 00070 V-BELTS, MATCHED PAIR 0 0659 RIGHT, IDLER ARM, WLD`MT - FWD.ROT. @ 0657 RIGHT, IDLER ARM, WLD`MT - REV. ROT. 005 IDLER PULLEY 077 IDLER BEARING SPACER 00059 SPRING, EXTENSION + 00000 000700 LOCKWASHER 7077 IDLER ASY., RH - FWD. ROT. 7005 IDLER ASY., RH - REV. ROT. 00006 NO. RED LUBRICAP 0790 BELT GUARD, WLD`MT - RH - FWD.ROT. 079 BELT GUARD, WLD`MT - RH - REV.ROT. 00500 00000 FLATWASHER @ + 0066 LOCKWASHER @ 7075 TOP SUPPORT, GUARD + 00756 007506 LOCKNUT 5 0065 CUTTERSHAFT PULLEY 6 005 IDLER PULLEY 7 0767 WASHER 0005 LOCKWASHER 9 00007 0 70695 BEARING ASY. @ 005 CUTTERSHAFT BEARING 0777 ROLLER, WLD`MT - 7" @ 706 ROLLER KIT - 7" + 00056 CARRIAGE 066900 PISTON 000000 LOCKNUT GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
7 IN MOWER ASY (PART ) GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
7 IN MOWER ASY (PART ) Continued... ITEM PART NO. QTY. DESCRIPTION 9 07 CUTTERSHAFT, WLD`MT 0 00759 7 COARSE CUT KNIFE 09676 7 HD COARSE CUT KNIFE 0076 6 RING COMPLETE 0670 6 HARDENED PIN 066700 6 COTTER PIN 7 005 SHOE/WEAR PLATE 06900 CARRIAGE 9 000700 PLOW # 000700 6 LOCKWASHER 0 7079 IDLER PIVOT PIN, W/ GREASE FITTING @ 0005 GREASE FITTING 00006 NO. RED LUBRICAPS 707 CUTTERSHAFT BEARING ASY. @ 7069 BEARING ASY, W/ SETSCREW 5 00756 6 7 007506 6 LOCKNUT 0000 6 9 000 6 LOCKWASHER 50 006 FENDER 5 007 5 000700 5 00000 NUT 55 007 GEARBOX MOUNT 56 005000 57 00000 FLATWASHER 59 09599 LOCKNUT 60 0757 FOOT GUARD, WLD`MT - 6" 6 000700 6 000 6 00097 @ 007 6 0009600 LOCKWASHER 65 000000 HEX NUT 7 70575 ROLLER BEARING ASY. - KEYED 70976 ROLLER BEARING ASY. - HEX 070 BEARING HOUSING 7 7057 BEARING - KEYED 006 BEARING - HEX 7 0009 GREASE FITTING 7 0007 SEAL GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
7 IN MOWER ASY (PART ) GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
7 IN MOWER ASY (PART ) Continued... ITEM PART NO. QTY. DESCRIPTION 75 00056 CARRIAGE 76 09790 LOCKNUT 77 075 ROLLER BRKT - LEFT 7 070 ROLLER BRKT - RIGHT 79 067 TRASH DEFLECTOR, - FRONT 0 00060 00000 FLATWASHER 09599 LOCKNUT @ 706 ROLLER BRG/BRKT ASY., LH 70596 ROLLER BRG/BRKT ASY., RH GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -5
A-FRAME ASY - (DISCONTINUED) GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -6
A-FRAME ASY - (DISCONTINUED) Continued... ITEM PART NO. QTY. DESCRIPTION 09697 HITCH, WLD`MT 000700 LOCKNUT 07500 09650 MOUNT 5 00756 6 00500 6 WASHER 7 096995 HYDRAULIC TANK, WLD`MT 0967 FILTER HOUSING ASY. 9 00600500 0 009500 LOCKWASHER 000500 LOCKNUT 00050 FILLER CAP 09677 O-RING 96 CLIP PIN 5 09650 LIFT PIN, WLD`MT 09655 LIFT PIN, WLD`MT 0959 0060900 000700 TOPLOCK NUT 6 7 00000 TOPLOCK NUT 007550 FILTER ELEMENT 9 00600 PIPE PLUG 0 0965 O-RING 09600 FILTER ELEMENT 096966 MAIN FRAME, WLD`MT 00756655 PARKING JACK GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -7
A-FRAME ASY - (NEW STYLE) GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
A-FRAME ASY - (NEW STYLE) Continued... ITEM PART NO. QTY. DESCRIPTION 096705 HITCH, WLD MT 000700 NUT 07500 09650 MOUNT 5 00756 6 00500 6 WASHER 09666 GASKET 96 CLIP PIN 5 09650 LIFT PIN - CAT I 09655 LIFT PIN - CAT II 0959 - CAT I 0060900 - CAT II 000700 NUT - CAT I 00000 NUT - CAT II 096966 MAIN FRAME, WLD MT 00756655 JACK 0975 SEAL KIT 09755 NUT & KIT 6 7 GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -9
BLADE BAR ASY - PN 096577 ITEM PART NO. QTY. DESCRIPTION 0965579 BLADE BAR, WLD`MT 0077900 NUT 00700 LOCKWASHER 09666 BLADES, MATCHED SET 5 00757, BLADE GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -0
CHECK CHAIN ASY - CAT-I ITEM PART NO. QTY. DESCRIPTION 709 CHAIN ASY. 70 BRACKET 05500 000000 NUT 5 000000 LOCKWASHER GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
CHECK CHAIN ASY - CAT-II ITEM PART NO. QTY. DESCRIPTION 70 CHAIN ASY. 7 BRACKET 05500 000000 NUT 5 000000 LOCKWASHER GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
DRIVELINE ASY - PN 007750 ITEM PART NO. QTY. DESCRIPTION 007755 YOKE, -/" - 6 SPLINE W79R CROSS BEARING KIT SPRING PIN 007757 INBOARD YOKE 5 007750 TUBE INNER 6 0077509 TUBE & SLEEVE 7 00775 YOKE, INBOARD 9 BEARING RING 9 797 SCREW 0 97 SUPPORT BEARING 660 ZERK 007750 OUTER SHIELD HALF 00775 INNER SHIELD HALF 0076795 YOKE, Q.D.KIT - PLASTIC GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
FILTER ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 0967 FILTER ASY 09600 FILTER ELEMENT REPLACEMENT ONLY 09767 SPRING, FILTER CARTRIDGE 0977 VALVE, FILTER BYPASS 0979 FILTER COVER 5 0975 SEAL KIT 6 09755 NUT AND KIT F/ TOP COVER GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
HYD. MOTOR - PN 0060 ITEM PART NO. QTY. DESCRIPTION 006 ROTATING KIT ASY. 006 BACKING PLATE ASY 006 SHAFT, KEYED NON SERVICE HOUSING ASY. 5 006 BEARING & RACE - SET 6 0065 CAMPLATE INSERT 7* 00009 O-RING 076600 9 000 WASHER 0* 000 RETAINING RING * 000 RETAINING RING * 000 SHAFT SEAL 0005 STEP KEY 0069 PLUG, W/ O-RING 5 009 BACKPLATE BEARING ASY. 6 000 HOUSING BEARING ASY. GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -5
HYD. MOTOR ASY ITEM PART NO. QTY. DESCRIPTION 0965670 HYDRAULIC MOTOR 0960 GASKET 00790 SPLIT FLANGE KIT 0075 ADAPTER, ELBOW 5 007606 MANIFOLD BLOCK 6 007000 7 09690 PLUG 00695 O-RING 9 0007000 LOCKWASHER 0 096600 RELIEF VALVE 00790 SPLIT FLANGE KIT 07500 ADAPTER, ELBOW GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -6
THIS PAGE INTENTIONAL LEFT BLANK GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -7
HYD. MOTOR ASY - PN 096506 GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
HYD. MOTOR ASY - PN 096506 Continued... ITEM PART NO. QTY. DESCRIPTION 0005 STEP KEY 0076 HUB 0000 00067 PULLEY 5 065 MOTOR MOUNT PLATE 069 MOTOR MOUNT PLATE 6 0065 ADAPTER, ELBOW 7 007 000000 LOCKNUT 9 0060 MOTOR, W/KEY 0 00756 000500 LOCKNUT 0090900 ADAPTER, ELBOW 7075 GUARD SUPPORT 000 STRAIGHT ADAPTER 5 0057 NUT CAP 6 60900 7 000700 7 LOCKWASHER 00759 RELIEF VALVE 0000 - RELIEF VALVE, SEAL KIT 9 09656 MANIFOLD BLOCK 0 09679 O-RING GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -9
HYD. MOTOR REPAIR PARTS - PN 0965670 GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -0
HYD. MOTOR REPAIR PARTS - PN 0965670 Continued... ITEM PART NO. QTY. DESCRIPTION 096575 GEAR AND SHAFT,SET 0076756 SEAL 0076757 RETAINER,SEAL 0969 SNAP RING 5 0076759 THRUST PLATE SEAL END 6 7 SQUARE SEAL 0969 DOWEL PIN 9 09690 PLUG 0 0076 MOUNTING FLANGE W/BUSHING 00769 PORTING FLANGE W/BUSHING 096579 GEAR HOUSING 09697 WASHER 096570 CAPSCREW 5 0969 CHECK ASSEMBLY 007676 SEAL KIT GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
HYD. SCHEMATIC (FRAME) GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
HYD. SCHEMATIC (FRAME) Continued... ITEM PART NO. QTY. DESCRIPTION 096975 SUCTION HOSE 096007 ADAPTER 09697 HOSE, " LG 0965059 CLAMP 5 0965 HOSE, 5" LG 6 000 ADAPTER 7 09576 ADAPTER 096505 HOSE, 05" LG 9 0005 ADAPTER - TEE 0 0760 SLEEVE 090600 SLEEVE 00756 HOSE, 70" LG 09650 HOSE, 05" LG 095769 ADAPTER 5 000 RESTRICTOR 6 09609 ADAPTER 7 0075067 ADAPTER 00757 ADAPTER - PIPE 9 007709 FILTER 0 0955 ELBOW 00779 HOSE, " LG 006 HOSE, 0" LG GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
HYD. SCHEMATIC - (HEAD) ITEM PART NO. QTY. DESCRIPTION 000 HOSE, " LG 096505 HOSE, 05" LG 0965656 TUBE 096575 HOSE, 0" LG 5 00075 CLAMP GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
THIS PAGE INTENTIONAL LEFT BLANK GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -5
HYDRAULIC TANK ASSEMBLY GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -6
HYDRAULIC TANK ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 096996 ASSY - HYDRAULIC TANK 096995 WLDMT-HYD TANK 0967 FILTER MODIFIED 00757 REDUCER-0MP 6FP 0075067 ADAPTER-6MP-6MJ 5 00065 /X7/ 6 009500 LOCKWASHER / HGHICOLLAR 7 09677 O-RING 00050 FILLER CAP 9 007709 FILLER, BREATHER W/VALVE 0 009700 SIGHT GUAGE 6 MP 00600 PIPE, PLUG " 007509 ADAPTER ELBOW -MP-6MJ-90 GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -7
LIFT ARM ATTACHMENT GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
LIFT ARM ATTACHMENT Continued... ITEM PART NO. QTY. DESCRIPTION 09650 PIN 069600 ROLL PIN 007 5 0000700 FLATWASHER 5 007655 PIN 6 00000 NUT 7 0965 BUSHING 09607 LIFT FRAME, WLD`MT 9 0076656 BUSHING 0 09659 PIN 007555 0009600 LOCKWASHER 007505 RUBBER DISC 0960 BUSHING 5 50A BUSHING 6 00 THRUST WASHER 7 0965099 CASTER, WLD`MT 650 COTTER PIN 9 09656 TAIL WHEEL MOUNT, WLD`MT 0 0000500 GREASE FITTING 0965777 PIVOT PIN 000760 NUT 095697 000000 WASHER 5 0069500 NUT 6 0000500 GREASE FITTING 7 007576 GREASE FITTING GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -9
LIFT CYLINDER ASY GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -0
LIFT CYLINDER ASY Continued... ITEM PART NO. QTY. DESCRIPTION 096506 CYLINDER 0965 BEARING 000000 NUT 0969 ACTUATOR 5 0965 BEARING 6* 09699 TILT LINK, WLD`MT 7 0965 BEARING 007555 COTTER PIN 9 0965 LINK PIN 0 07600 CLIP PIN 096507 PIN 0000700 FLATWASHER 00000 007 5 5 096096 PIN 6 007655 PIN 7 096507 PIN 00756 STABILIZER 9 0965070 TRANSPORT LINK 0 09660 CLIP PIN 096505 SPACER * 0965 TILT LINK ASY. ( INCL.,ITEMS # 5,6,& 7 ) GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
MOTOR & SPINDLE ASY ITEM PART NO. QTY. DESCRIPTION 0965670 MOTOR 096095 DOUBLE END STUD 00000 6 NUT 0700 5 0960 GASKET 6 09605 6 7 000700 6 LOCKNUT 070700 9 000090 LOCKWASHER 0 096055C SPINDLE GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
PNUEMATIC TIRE - PN 0079700A ITEM PART NO. QTY. DESCRIPTION 00700 TUBE, F/ 6 PLY TIRES GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
PUMP ASY GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
PUMP ASY Continued... ITEM PART NO. QTY. DESCRIPTION 0000 ROTATING KIT ASY. 09655 BACK PLATE ASY. 0000 CAMPLATE INSERT 0000 SHAFT 5 006 BEARING & CONE KIT 6 00009 O - RING 7 076600 6 000 WASHER 9 000 RETAINING RING 0 000 RETAINING RING 000 SHAFT SEAL GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -5
ROTARY MOWER ASY GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -6
ROTARY MOWER ASY Continued... ITEM PART NO. QTY. DESCRIPTION 09657 DECK, WLD`MT 000500 0 LOCKNUT 60000 0 LOCKWASHER 00000 0 FLATWASHER 5 00000 6 A66 7 096575 SKID SHOE 077 ROLLER, WLD`MT 9 09790 LOCKNUT 0 00056 CARRIAGE 70976 BEARING ASY. 070 BEARING HOUSING 006 BEARING 0009 GREASE FITTING 07 ROLLER MTG WLD`MT - LH 070 ROLLER MTG WLD`MT - RH 05700 REAR FLAP 0965797 CHAIN GUARD ASY. 5 09655 CHAIN GUARD BRKT. 6 00900 56 CHAIN LINKS 7 0000000 CABLE CLAMP 0099000 CABLE 9 0007 SEAL GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -7
SPEED INCREASER & PUMP ASY (DISCONTINUED) ITEM PART NO. QTY. DESCRIPTION 097900 SPEED INCREASER 0060 PUMP 0000 00750959 5 0009600 LOCKWASHER 6 0075060 SPACER 7 000000 LOCKNUT 0965066 INPUT SHAFT 9 096506 RETAINING RING GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -
SPEED INCREASER & PUMP ASY (NEW STYLE) ITEM PART NO. QTY. DESCRIPTION 09670 SPEED INCREASER 0060 PUMP 095966 0009600 LOCKWASHER 5 0075606 6 6 096705 - A-FRAME GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -9
SPEED INCREASER ASY - PN 09670 (50 RPM) GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -50
SPEED INCREASER ASY - PN 09670 (50 RPM) Continued... ITEM PART NO. QTY. DESCRIPTION 007559 HOUSING 007550 GASKET 00755 GASKET 00755 FLANGE 5 00755 PLUG 6 00755 GASKET 7 007555 PLUG 007556 LOCKWASHER 9 007557 0 00755 LOCKWASHER 007559 007550 DOWEL 00755 HOUSING 00755 GASKET 5 00755 FLANGE 6 00755 GASKET 7 007555 BREATHER 007556 5 GASKET 9 007557 PLUG 0 00755 SEAL 007559 BEARING 007550 RETAINING RING 00755 BEARING 00755 SHAFT 5 00755 KEY 6 00755 GEAR - 50 RPM 007565 GEAR - 000 RPM 007555 PINION - 50 RPM 7 007565 PINION - 000 RPM 007556 SPACER 9 0075950 PUMP FLANGE 0 09667 - SPLINED PUMP ADAPTER, " - 5 SPLINE 007595 - SPLINED PUMP ADAPTER, 7/" - SPLINE GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -5
SPEED INCREASER REPLACEMENT PARTS - PN 097900 GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -5
SPEED INCREASER REPLACEMENT PARTS - PN 097900 Continued... ITEM PART NO. QTY. DESCRIPTION 09700 SHAFT ADAPTER 00755 GEAR - TEETH 5 007579 GEAR & SHAFT, LOW SPEED 6 09600 ADAPTER, PLATE 7 007599 COVER, CLOSED 0075950 COVER, OPEN 9 0075970 PIPE PLUG 0 007555 SEAL 007595 RETAINING RING 00759 BREATHER 007595 BEARING CUP 00755 BEARING CONE 5 00790 BEARING CUP 6 007900 BEARING CONE 7 007595 SPACER RING 0075955 HOUSING 9 0075956 HOUSING 0 0075957 DOWEL 007595 GASKET -.05 007597 SPACER RING 0075959 - SHIM.005 ALUM. 5 0075960 - SHIM.007 ALUM. 6 007596 - SHIM.00 ALUM. 7 007596 SHIM.005 FIBRE. 007596 - SHIM.005 ALUM. 9 007596 SHIM.005 FIBRE. 0 0075965 - SHIM.007 ALUM. 0075966 - SHIM.00 ALUM. 0075967 007596 LOCKWASHER 0075969 5 00090 HEX NUT 6 0000 LOCKWASHER 007577 MAGNETIC PLUG GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -5
SPINDLE HOUSING & SPINDLE ASY - PN 096055C ITEM PART NO. QTY. DESCRIPTION 0960 GASKET 096056C HOUSING 096056 SPINDLE 096055 BEARING RING 5 0960559 SEAL 6 007567 SNAP RING 7 0960557 SPINDLE CUP & CONE ASY. 007556 BEARING 9 09669 LOCKWASHER 0 09600 LOCKNUT 00756 GREASE PLUG 095960 PRESSURE RELIEF PLUG GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -5
TILT CYLINDER ASY - PN 096506 ITEM PART NO. QTY. DESCRIPTION 09676B HYD CYLINDER BORE X -5/ 097569 WLDMT TUBE.00-.6-W 097550 HEAD,CYLINDER X.50 09755 PISTON.00-.00-S-WR-PSP 097560 WLDMT ROD.50-.6-W 5 5JRC60 LOCKNUT TLM 6 096005 PLUG # MB W/T-VENT & O-RING 7 09600 ADP HYD ELBOW MB-MJ90 0965 BEARING-TEFLON IMPREG. 097550 SEAL KIT NF PL GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -55
WHEEL HUB ASY GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -56
WHEEL HUB ASY Continued... ITEM PART NO. QTY. DESCRIPTION 00756576 BEARING CUP - OUTSIDE 00750 BEARING CONE - INSIDE 00756577 BEARING CUP - INSIDE 007577 5 STUD - /" DIA. HOLE 9 5 STUD - 5/" DIA. HOLE 5 007506 5 NUT 6 0075690 BEARING ADJUSTING NUT 7 007569 SEAL 007569 WASHER 9 007569 DUST CAP 0 0000000 COTTER PIN 0000500 GREASE FITTING 00756000 WHEEL HUB 070 BEARING CONE 0075600 - SPINDLE 007569 - HUB, W/ CUPS & STUBS 007565 - WHEEL HUB ACCESS. KIT 0075600 - SPINDLE DUAL WHEEL 5 GrassKing (09-0) Rev 05-0 Alamo Group Inc. Parts Section -57
TO THE OWNER/OPERATOR/DEALER To keep your implement running efficiently and safely, read your manuals thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT (9.5 Subpart C) makes these minimum safety requirements of tractor operators: REQUIRED OF THE OWNER. Provide a Roll-Over-Protective Structure that meets the requirements of this standard.. Provide seat belts that meet the requirements of this paragraph of this standard and SAE JC.. Ensure that each employee uses such seat belt while the tractor is moving.. Ensure that each employee tightens the seat belt sufficiently to confine the employee to the protected area provided by the ROPS. REQUIRED OF THE OPERATOR. Securely fasten seat belt if the tractor has a ROPS.. Where possible, avoid operating the tractor near ditches, embankments, and holes.. Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.. Stay off slopes too steep for safe operation. 5. Watch where you are going, especially at row ends, on roads, and around trees. 6. Do not permit others to ride. 7. Operate the tractor smoothly, no jerky turns, starts, or stops.. Hitch only to the draw bar and hitch points recommended by the tractor manufacturer. 9. When the tractor is stopped, set brakes securely and use park lock, if available. Keep children away from danger all day, every day... Equip tractors with rollover protection (ROPS) and keep all machinery guards in place... Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens.
ALAMO INDUSTRIAL Limited Warranty. Limited Warranties.0. Alamo industrial warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser ( purchaser ) and warrants for six months to the original commercial or industrial purchaser ( purchaser ) that the goods purchased are free from defects in material or workmanship..0. Manufacturer will replace for the purchaser any part or parts found, upon examination at one of its factories, to be defective under normal use and service due to defects in material or workmanship..0. This limited warranty does not apply to any part of the goods which has been subjected to improper or abnormal use, negligence, alteration, modification, or accident, damaged due to lack of maintenance or use of wrong fuel, oil, or lubricants, or which has served its normal life. This limited warranty does not apply to any part of any internal combustion engine, or expendable items such as blades, shields, guards, or pneumatic tires except as specifically found in your operator s manual..0. Except as provided herein, no employee, agent, dealer, or other person is authorized to give any warranties of any nature on behalf of manufacturer.. Remedies And Procedures.0. This limited warranty is not effective unless the purchaser returns the registration and warranty form to manufacturer within 0 days of purchase..0. Purchaser claims must be made in writing to the authorized dealer ( dealer ) from whom purchaser purchased the goods or an approved authorized dealer ( dealer ) within 0 days after purchaser learns of the facts on which the claim is based..0. Purchaser is responsible for returning the goods in question to the dealer..0. If after examining the goods and/or parts in question, manufacturer finds them to be defective under normal use and service due to defects in material or workmanship, manufacturer will: (A) repair or replace the defective goods or part(s) or (B) reimburse purchaser for the cost of the part(s) and reasonable labor charges (as determined by manufacturer) if purchaser paid for the repair and/or replacement prior to the final determination of applicability of the warranty by manufacturer. The choice of remedy shall belong to manufacturer..05. Purchaser is responsible for any labor charges exceeding a reasonable amount as determined by manufacturer and for returning the goods to the dealer, whether or not the claim is approved. Purchaser is responsible for the transportation cost for the goods or part(s) from the dealer to the designated factory.. Limitation Of Liability.0. Manufacturer disclaims any express (except as set forth herein) and implied warranties with respect to the goods including, but not limited to, merchantability and fitness for a particular purpose..0. Manufacturer makes no warranty as to the design, capability, capacity, or suitability for use of the goods..0. Except as provided herein, manufacturer shall have no liability or responsibility to purchaser or any other person or entity with respect to any liability, loss, or damage caused or alleged to be caused directly or indirectly by the goods including, but not limited to, any indirect, special, consequential, or incidental damages resulting from the use or operation of the goods or any breach of this warranty. Not withstanding the above limitations and warranties, manufacturer s liability hereunder for damages incurred by purchaser or others shall not exceed the price of the goods..0. No action arising out of any claimed breach of this warranty or transactions under this warranty may be brought more than two () years after the cause of action has occurred.. Miscellaneous.0. Proper venue for any lawsuits arising from or related to this limited warranty shall be only in Guadalupe county, Texas..0. Manufacturer may waive compliance with any of the terms of this limited warranty, but no waiver of any terms shall be deemed to be a waiver of any other term..0. If any provision of this limited warranty shall violate any applicable law and is held to be unenforceable, then the invalidity of such provision shall not invalidate any other provisions herein..0. Applicable law may provide rights and benefits to purchaser in addition to those provided herein. Keep for your records Attention: Purchaser should fill in the blanks below for his reference when buying repair parts and/or for proper machine identification when applying for warranty. Alamo Industrial Implement Model Serial Number Date Purchased Dealer Attention: Read your operator s manual ALAMO INDUSTRIAL 50 E. Walnut Seguin, Texas 755 0-79-0
GrassKing Pub -0 P/N 09650P