EN840 Bin Tippers Catalogue The complete guide to EN840-compliant bin lifting and tipping equipment from Simpro Handling Equipment Ltd Simpro Handling Equipment Ltd 66 Rangi Road, Takanini 2105 Auckland, New Zealand +64 9 634 7445 sales@simpro.world
Hi.? Need a little guidance Let us direct you to the right place. I need to empty less than 10 wheelie bins each day, weighing up to 65kg, and at up to 1.5 metres high. I need to empty as many as 30 wheelie bins each day, weighing up to 150kg, and at up to 1.6 metres high. I need to empty as many as 250 wheelie bins each day, weighing up to 250kg, and at up to 7.0 metres high. I need to empty 4-wheel MGBs, wheelie bins or other large industrial containers, weighing up to 600kg. I want to know about the types of cradle that are available; or I want to buy compatible wheelie bins I want to know more about the custom options and accessories that are available for bin tippers. Just browsing, thanks. 22 You re welcome.
E z i -M T TM Page 4 M u lt i - Ti p TM D u m p m a s t er M e ga Du m p er P ag e 6 TM Page 8 TM C rad les & B in s O pt i ona l Fea t u r es Page 10 Page 12 Page 14 Simpro EN840 Bin Tippers Catalogue v5.0 September 2017 Simpro Handling Equipment Ltd 66 Rangi Road, Takanini 2105 Auckland, New Zealand +64 9 634 7445 sales@simpro.world
Ezi-MT Series Model Tip Height Capacity Power Height (lowered) Height (raised) Length Width Weight IP Rating Safety Class EZI-MT1500 1500mm 65kg Manual Winch 2302mm 2535mm 924mm 907mm ~110kg IP66 ISO13849-1 AS/NZS4024 Category 1 / PLc EZI-MT-CUSTOM Enquire with Simpro via sales@simpro.world or +64 9 634 7445, or view options at https://simpro.world/bin-tippers/ezi-mt 44 Standard or recommended specifications are printed in bold. See Page 12 for details on cradles and bin compatibility.
+64 9 634 7445 sales@simpro.world 1.5m Fixed tip height...it saves my 65kg Capacity (max gross bin weight) 150kg of material per hour per operator Duty cycle Manual Winch Power supply shoulders, and saves my muscles! Max Schroder - Caretaker - Sancta Maria College The Ezi-MT is an economical manual bin tipper from Simpro, designed for low-volume users. Although it has a large 65kg lifting capacity, the Ezi-MT is lightweight and easy to move making it an ideal solution for schools, cafes, small businesses, and local councils. The Ezi-MT uses the same reliable tipping action found on other Simpro products, but with a difference: it is powered by the user! The unique hand winch-powered design allows full compliance with workplace health and safety laws, without expensive hydraulic machinery. Like other Simpro products, the Ezi-MT always keeps the weight of the bin within the footprint of the machine throughout the tipping cycle. This ensures stability even when emptying heavy bins. Whole-of-life envi r onmental impact w as considered from the start of the Ezi-MT design process, to create a product that doesn't hurt the planet. The unique single-mast design weighs just 110kg, and can be shipped flat-packed to reduce carbon emissions from transport. The Ezi-MT has no powered components, generates no electronic waste, and is completely recyclable. Yet the Ezi-MT is also very robust, and can be used outdoors for many years with little or no maintenance. Simpro EN840 Bin Tippers Catalogue v5.0 September 2017 Simpro Handling Equipment Ltd 66 Rangi Road, Takanini 2105 Auckland, New Zealand +64 9 634 7445 sales@simpro.world
Multi-Tip Series Model Tip Height Capacity Power Height (lowered) Height (raised) Length Width Weight IP Rating Safety Class MT1200 1200mm Battery solar 1995mm 2240mm ~150kg MT1600 1600mm 150kg 1-phase mains 3-phase mains 2380mm 2660mm 879mm 1237mm ~160kg MT1800 1800mm compressed-air 2580mm 2860mm ~170kg IP56 IP66 IP69K ISO13849-1 AS/NZS4024 Category 1 / PLc MT-CUSTOM Enquire with Simpro via sales@simpro.world or +64 9 634 7445, or view options at https://simpro.world/bin-tippers/multi-tip 66 Standard or recommended specifications are printed in bold. See Page 12 for details on cradles and bin compatibility.
+64 9 634 7445 sales@simpro.world 1.2m/1.6m/1.8m Various tipping heights available 150kg Capacity (max gross bin weight) 2,500kg of material per charge or 2,500kg per hour continuous Duty cycle battery and mains-powered Battery solar 1-phase mains 3-phase mains compressed air Power supply Staff enjoy using it because it is simple, safe and reliable. - Caffe L affare, Wellington The Multi-Tip from Simpro is everything a bin tipper should be - safe, reliable, costeffective and easy to use. With a huge 150kg capacity and 15-second tipping cycle, it is ideal for operations where a light, mobile bintipping machine is required. The Multi-Tip uses an innovative single-mast design which ensures the operator has a clear view during operations to ensure safety. A dual-hand control system ensures moving parts cannot be accessed while the machine is in use. Additionally, the single-mast design is easy to clean and maintain. As standard, the Multi-Tip is fitted with a Simpro universal cradle, which lifts all common wheelie bins with no clamping or modification. However a range of custom cradles are available, allowing the machine to empty any commercial container weighing up to 150kg. Like all Simpro products, the Multi-Tip is extremely robust and requires no regular maintenance. It is corrosion-resistant and IPrated to allow for indoors or outdoors use, and a stainless steel version is available for use in hygiene-critical environments. Simpro EN840 Bin Tippers Catalogue v5.0 September 2017 Simpro Handling Equipment Ltd 66 Rangi Road, Takanini 2105 Auckland, New Zealand +64 9 634 7445 sales@simpro.world
Dumpmaster Series Model Tip Height Capacity Power Height Length Width Weight IP Rating Safety Class DM0700* 700mm 1770mm ~185kg DM1200 DM1500 1200mm 1500mm 250kg Battery solar 1-phase mains 3-phase mains compressed-air 2260mm 2560mm 1170mm 964mm ~205kg ~215kg DM1800 1800mm 2860mm ~225kg IP56 IP66 IP69K ISO13849-1 AS/NZS4024 Category 1 / PLc or Category 3 / PLd or Category 4 / PLe DM2100 2100mm 3160mm ~235kg DM-CUSTOM xxxx mm Enquire with Simpro via sales@simpro.world or +64 9 634 7445, or view options at https://simpro.world/bin-tippers/dumpmaster 88 Standard or recommended specifications are printed in bold. See Page 12 for details on cradles and bin compatibility. *Dockmaster variant, with safety legs and other features to allow operating from elevated platforms.
+64 9 634 7445 sales@simpro.world 0.7m - 10m Various tipping heights available 250kg Capacity (max gross bin weight) 10,000kg of material per charge or 5,000kg per hour continuous Duty cycle battery/mains-powered Battery solar 1-phase mains 3-phase mains compressed air Power supply Our bin lifter is solar powered and has not needed to be charged for 18 months! Les Pettifer Kumeu Equestrian Trainer The Simpro Dumpmaster safely empties any kind of bin at any height, with a unique electrohydraulic mechanism that can lift and tip more than 250kg. The Dumpmaster is the safest, fastest and most reliable bin tipper on the market, and has been continuously improved over more than thirty years. Dumpmaster bin tippers are very versatile and are used in dozens of applications; from emptying rubbish bins into skips to pouring food ingredients into mixers. They feature a unique tipping action which lifts the bin straight up, then gently rolls it upside down over the lip of the receptacle. Less than 1m3 of floor space is required regardless of tipping height, since the weight of the bin is maintained within the floor footprint at all times. The Dumpmaster was designed for safety, with full guarding and door interlock systems fitted as standard. The machine can be optionally certified to various standards, including ISO 12100, AS/NZS 4024, and CE. No matter how it is used, the Simpro Dumpmaster has proven to be safe, reliable and economical to operate, year after year. Simpro EN840 Bin Tippers Catalogue v5.0 September 2017 Simpro Handling Equipment Ltd 66 Rangi Road, Takanini 2105 Auckland, New Zealand +64 9 634 7445 sales@simpro.world
MegaDumper Series Model Tip Height Capacity Power Height Length Width Weight IP Rating Safety Class MD600B1500 600kg (up to 660L bin) 3155mm 1342mm ~350kg 1500mm 3-phase mains MD600E1500 600kg (up to 1100L bin) 1-phase mains 3240mm 1592mm ~400kg 1874mm MD600B1800 600kg (up to 660L bin) compressed-air 3455mm 1342mm ~375kg 1800mm battery solar MD600E1800 600kg (up to 1100L bin) 3540mm 1592mm ~430kg IP56 IP66 IP69K ISO13849-1 AS/NZS4024 Category 1 / PLc or Category 3 / PLd or Category 4 / PLe MD-CUSTOM xxxx mm Enquire with Simpro via sales@simpro.world or +64 9 634 7445, or view options at https://simpro.world/bin-tippers/megadumper 10 10 Standard or recommended specifications are printed in bold. See Page 12 for details on cradles and bin compatibility.
+64 9 634 7445 sales@simpro.world 0.7m - 10m Various models, fixed tip height 600kg Capacity (max gross bin weight) 10,000kg of material per hour continuous Duty cycle 3-phase mains-powered 3-phase mains compressed air 1-phase mains Power supply Fantastic piece of kit, Simpro are a quality item. Stephen Holbrook Baler & Compactor Services The MegaDumper is based on the proven design of the Simpro Dumpmaster, and is probably the safest, most reliable and easy-touse industrial tipper available. Originally designed for emptying 660-litre and 1100-litre wheelie bins weighing up to 600kg, the MegaDumper has now been adapted to tip almost any container at heights up to ten metres. Floor space requirements do not change regardless of tipping height, since the weight of the bin remains within the floor footprint at all times. Like all Simpro products, the MegaDumper was designed for safety from the ground up. Full height guarding and swing-up door with safety interlock system are fitted as standard. Additional certification is available to a range of international standards, including ISO 12100, AS/NZS 4024, and CE. Since its introduction in 1998 the MegaDumper has proven to be remarkably reliable in even the most demanding of environments. Some operators have used the MegaDumper as an integral part of their production workflow for two decades with no regular maintenance. Simpro EN840 Bin Tippers Catalogue v5.0 September 2017 Simpro Handling Equipment Ltd 66 Rangi Road, Takanini 2105 Auckland, New Zealand +64 9 634 7445 sales@simpro.world
Cradles & Bins Standard cradle features (BASELIFT-EN-240) EN840 cradle and bin selection matrix Machine type Cradle type Bin type 60L 80L 120L 140L 240L 360L 660L 1100L Custom bins Lift mechanism Bin retainment mechanism Regional usage Ezi-MT Multi-Tip BASELIFT-EN-240 Yes** No Base-lift cradle* Wheel catches Worldwide (except USA) Dumpmaster MegaDumper B-Series MegaDumper E-Series BASELIFT-EN-360 No Yes No COMBLIFT-EN-360 Yes*** Comb-lift catches with autolock mechanism* Europe COMBI-CRADLE No Yes Customisable bolt-on catches Base-lift cradle* BASELIFT-EN-660 Yes** No Yes No Wheel catches Worldwide (except USA) COMBLIFT-EN-660 No Yes*** No Comb-lift catches with autolock mechanism* Europe BASELIFT-EN-1100 Yes** No Yes No Base-lift cradle* Wheel catches Worldwide (except USA) COMBLIFT-EN-1100 No Yes*** Comb-lift catches with autolock mechanism* Europe All machines CRADLE-CUSTOM Custom cradles are available to suit any commercial bin or container - enquire with Simpro via sales@simpro.world or +64 9 634 7445 Standard or recommended specifications are printed in bold. *Base-lift cradles are recommended, as comb-lift catches place more mechanical stress on the bin structure, reducing bin life. 12 12 **If the wheelie bins have projecting outset wheels. Wheelie bins with inset wheels are only compatible with comb-lift cradles. ***If the bins have an EN840-compliant reinforced comb around the lip. Bins with no comb are compatible only with base-lift cradles.
+64 9 634 7445 sales@simpro.world Wheelie Bins (2 wheel) A complete range of two-wheel wheelie bins are available from Simpro, with capacities of 60, 80, 120, 140, 240 and 360 litres. These bins have stable outset wheels and a durable HDPE body, and are designed to be emptied by the Simpro Ezi-MT, Multi-Tip and Dumpmaster bin tippers. They are used by schools, households and businesses around the world for waste collection and recycling. Simpro wheelie bins are easy to maneuver thanks to several features, including a large, thick grab-handle, outset 200mm wheels, and a reinforced comb for EN840-compliant lifting equipment. The new moulded lid is designed to divert moisture while allowing air flow to encourage evaporation, which is especially useful for organics or damp, heavy waste. Both the body and lid are injection-moulded from a special UV-stabilized HDPE plastic, which is extremely robust, and resistant to decay, frost, heat Model Volume Wheels Body/Lid Colours WB60 WB80 WB120 WB140 WB240 WB360 WB660 WB1100 WB-CUSTOM 60 litres 80 litres 120 litres 140 litres 240 litres 360 litres 660 litres 1100 litres Simpro four-wheel waste bins are available in sizes of 660 litres and 1100 litres. These large mobile garbage bins have four castor wheels and a durable HDPE body, perfect for commercial waste and recycling. They are designed to be lifted and tipped by the Simpro MegaDumper product range. The bins are very stable and easy to manoeuvre - even with up to 400kg of waste - thanks to a reinforced base, four large castors and thick grab handles on all sides. A secure waterchanneling lid (with optional hatch) minimises odours and allows the bins to be used both indoors and outdoors. The body, lid and handles are injectionmoulded from a special UV-stabilized HDPE plastic, which is extremely robust, and resistant to decay, frost, heat and chemicals. All steel components are corrosion-treated to ensure a long service life in even the harshest of environments. 2x 200mm fixed outset wheels 2x 250mm inset wheels 4x 200mm castors Nature Green Dark Green Grey Black Red Lime Green Blue Yellow Enquire with Simpro via sales@simpro.world or +64 9 634 7445, or view options at https:// simpro.world/bins and chemicals. All steel components are corrosion-treated to ensure a long service life in even the harshest of environments. Wheelie Bins (4 wheel) Simpro EN840 Bin Tippers Catalogue v5.0 September 2017 Simpro Handling Equipment Ltd 66 Rangi Road, Takanini 2105 Auckland, New Zealand +64 9 634 7445 sales@simpro.world
Optional Features All models Standards & Compliance Simpro machines can be specified to meet international standards for machinery safety, including ISO 12100 and AS/NZS 4024 Cat3/ Cat4/Pld/Ple. This may involve additional features such as a programmable control unit, E-stop buttons and uprated circuitry. All battery-powered machines Solar Power Machines that are to be used outdoors can be fitted with a solar panel. Depending on the amount of sunlight available, up to five tonnes of waste can be emptied each day using solar power alone. Dumpmaster / MegaDumper Bin Hook Kit The bin hook kit can be quickly attached to most models, and secures the machine in place against a skip or hopper. Several different versions are available, to suit different bins. The unit can be simply mounted at any height, without fastenings. Dumpmaster / MegaDumper Custom Door Options All machines with cage guarding can be supplied with a left-hinge door, right-hinge door, swing-up door or roller door. The swing-up door and roller door take up little space, but are more complex and may require additional maintenance. Multi-Tip / Dumpmaster / MegaDumper Tipping Chute 14 14 Frame-mounted tipping chutes are available for operation where the machine cannot be placed right against the skip or hopper. The chutes are easily attached, and can be folded up out of the way when not in use. Note that the tipping height generally needs to be increased to allow for the slope of the chute.
+64 9 634 7445 sales@simpro.world All models Stainless Steel Construction All machines can be fully or partially constructed from quality 304- grade stainless steel, suitable for hygiene-critical or corrosive environments such as food production or chemical processing. Corrosion-resistant lifting chains and fittings are also available. Dumpmaster / MegaDumper Polycarbonate Guarding Panels Unbreakable polycarbonate plastic guarding can be supplied in place of the standard 25x25mm wire mesh guarding. An operator guard panel (splash shield) can also be fitted adjacent to the controls, to protect the operator when tipping liquids. Mains machines only Auto-Cycle Operation An auto-cycle controller may be fitted to mains-powered machines, allowing the operator to move away while tipping. A full-authority digital control unit is also available, allowing complex programmable behaviours or interaction with other equipment. All models Customised Controls Operator controls can be fitted anywhere on the machine, on a pendant control, or even in remote locations, to suit productivity or safety requirements. Dual-hand controls can also be fitted, which prevent the operator from carrying out other interactions while using the machine. All models Other Options - Digital scales: accurately weigh product as it is emptied. - Additional guarding: foot-guard panels, front-guard panels, etc. - Compressed-air power: for flammable or explosive environments. - Custom designs: to suit unique industrial requirements.
Simpro Handling Equipment Limited 66 Rangi Road, Takanini 2105 Auckland, New Zealand Email: sales@simpro.world Web: https://simpro.world Phone: +64 (09) 634 0915 NZ TollFree: 0800 734 744 AU TollFree: 1800 25 00 59 Products described in this catalogue contain Intellectual Property, including design elements registered to or licensed by Simpro Handling Equipment Ltd. Ezi-MT, Multi-Tip, Dumpmaster and MegaDumper are registered trademarks of Simpro Handling Equipment Ltd. This document is copyright 2017 Simpro Handling Equipment Ltd