USA Canada On the Internet: Toll Free wieland Product Range Electrical Connections

0.2 F 01/02

270

Excerpt from our master catalogue

wiecon PCB terminals In Ageneral, all Wieland components which are obliged to have the identification are provided with the A mark Pluggable PCB terminals and headers Two part PCB terminals with pin strip headers Modular railmount terminals with integral PCB edge connectors PCB terminals 2 tier PCB terminals 3 tier PCB terminals 4 tier PCB terminals Special terminals RAST system Termination modules Marker tag/strips 272

wiecon CONTENTS Pitch 3./3.81 mm Terminal connector, rising cage clamp version Page 280 Terminal connector, spring clamp version Page 281 Header Page 284 Pitch.00/.08/7./7.2 mm Terminal connector, rising cage clamp version Page 28 Header with in-line terminal spring clamp version (= inverted socket) Page 29 Terminal connector, spring clamp version Page 294 Terminal connector, soldered version Page 29 Headers Page 297 TOP plug with strain relief Page 320 Pitch 3./.00 mm screw version Page 31 Pitch 3. mm spring clamp version Page 324 header Pitch.00 mm modular railmount terminals with integral header Page 3 Pitch 3. mm rising cage clamp version Page 328 Pitch.00 mm rising cage clamp version Page 330 Pitch 3./3.81 mm rising cage clamp version Page 280 Pitch.00/.08 mm rising cage clamp version Page 28 spring clamp version Page 292 Pitch,3 mm Page 3 Pitch 7./7.2 mm rising cage clamp version Page 288 spring clamp version Page 294 Pitch.00/.1 mm rising cage clamp version Page 318, 37, 377 Pitch.00/.08 mm rising cage clamp version Page 34 Pitch.00/.08 mm rising cage clamp version Page 370 Pitch.00 mm rising cage clamp version Page 373 Pitch.08 mm Modular terminal Page 378 Disconnect terminal Page 378 Modular fuse terminal Page 379 ASI connector Page 392 Page 380 Page 38 Page 394 273

wiecon PCB Pluggable PCB terminals and headers Page 298 Page 301 Page 299 Page 299 Page 301 Page 297 Page 300 Page 297 Page 298 Pitch.00/.08 mm Pitch 7./ 7.2 mm Pitch Pole.00/.08 7./7.2.00/.08.00/.08 7./7.2.00/.08 7./7.2.00/.08.00/.08 8113 S/W 8313 S/W 8113 S/WOF 8113 S/WF 8313 S/WF 8113 S/G 8313 S/G 8113 S/GOF 8113 S/GF 8213 S/W 8413 S/W 8213 S/WOF 8213 S/WF 8413 S/WF 8213 S/G 8413 S/G 8213 S/GOF 8213 S/GF 2 24 2 2 24 2 22 2 2 24 2 2 24 2 22 Page 291 2 24 8113 BK.00 Page 28 8113 B.00 2 24 8213 B.08 Page 292 8113 BFK.00 2 24 8213 BFK.08 Page 287 2 24 8213 B/S.08 Page 288 8313 B 7. 2 22 8413 B 7.2 Page 28 8113 B/F.00 2 8213 B/F.08 Page 288 8313 B/F 7. 2 24 8413 B/F 7.2 Page 289 8113 B/VL.00 2 24 8213 B/VL.08 Page 289 8113 B/VR.00 2 8213 B/VR.08 Page 290 2 8413 B/VL 7.2 Page 290 2 24 8413 B/VR 7.2 Page 29 8113 B/TOP.00 2 24 8213 B/TOP.08 Page 29 2 24 8213 BL/G.08 Page 29 8213 BL/W.08 8113 8113 8113 8213 8113 8213 274

wiecon Page 300 Page 302 Page 302 Page 293 Page Page Page 30 Page 30 Page 304 Page 304 303 303 7./7.2.00/.08.00/.08.08.00/.08.00/.08.08.08.08.08.00/.08.00/.08 8313 S/GF 8113 S/S 8113 S/S1 8213 SUFK 8113 SE/W 8113 SE/G 8213 S/ 8213 S/ 8213 S/ 8213 S/ 8113 SEG/W 8113 SEG/G 8413 S/GF 8213 S/S 8213 S/S1 8213 SE/W 8213 SE/G DFWW DFWWM DFLS DFLSM 8213 SEG/W 8213 SEG/G 2 2 24 2 24 2 (24) 2 24 2 24 2 24 2 22 2 24 2 22 2 24 2 24 slot together slot together with nut with nut 8113 8213 8113 8213 8213 8213 8113 8113 8213 8113 8113 8213 8213 8213 8213 8213 8213 8213 8213 8213 8213 8213 8213 8213 8213 8213 27

wiecon PCB Pluggable PCB terminals and modular railmount terminals Page 3 Page 3 Page 311 Page 3 Page 3 Page 308 Pitch.00/ 7. mm Pitch.00.00 7..00 7..00 2 24 2 24 2 2 24 2 2 24 slot together slot together slot together slot together slot together slot together Page 28 8113 B.00 Page 288 8313 B 7. Page 289 8113 B/VL.00 Page 289 8113 B/VR.00 Page 29 8113 B/TOP.00 Page 292 8113 BFK.00 2 24 2 2 24 2 24 2 24 2 24 27

wiecon Pluggable PCB terminals and headers Page 284 Page 28 Page 284 Page 28 Pitch Pitch 3.81 mm 3. mm Pitch 3./3.81 3./3.81 3./3.81 3./3.81 813 S/W 813 S/WF 813 S/G 813 S/GF 8813 S/W 8813 S/WF 8813 S/G 8813 S/GF 2 20 2 20 2 20 2 20 Page 280 813 B 3. 8813 B 3.81 Page 280 813 B/F 3. 8813 B/F 3.81 Page 282 8813 B/VR 3.81 2 20 2-20 2-20 8813 8813 Page 282 8813 B/VL 3.81 2-20 8813 8813 Page 283 8813 B/VRF 3.81 2-20 8813 8813 Page 283 8813 B/VLF 3.81 2-20 8813 8813 Page 281 813 BFK 3. 2 20 813 813 277

wiecon PCB Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple to maintain screw termination by means of rising cage clamp for security screw connection is easy to operate spring clamp connection for speed comprehensive range means that the direction of insertion/withdrawal and conductor guide methodology can be individually matched to the application simple, clear and secure method of connecting and disconnecting multiple pole configuration connection of single core and finely stranded conductors up to 1. mm 2 and 2. mm 2 metric and imperial pitch options The pitch measured in inches can be identified by a pip on the conductor guide funnel clamping with TOP connection PCB terminals with closed side walls: ensure no miss-connection PCB terminals with open side walls enable expansion with no effect on the pitch to the circuit board pitch options: 3.81/. 00/.08/ 7./ 7.2/.00/.1 mm two tier headers Flange version terminal connectors and headers can also incorporate additional fixing elements such as screw flanges which helps prevent them being separated accidentally secure electrical and mechanical connection even under shock and vibration Coding a coding system is available to prevent the connection of non-interchangeable components. The coding parts can be inserted into special slots in either or both the terminal connector and header coding does not effect number of available poles coding possible with a minimum of 4 poles Marking clear pole marking which is easy to read enabling easy connection by means of ink jet printing directly onto the terminal connector using indelible ink special marking is possible on request Applications designed for frequent and ongoing equipment maintenance and system changes as the pluggable terminal connector and PCB header are easily connected and disconnected prefabricated wiring arrangements can be easily interfaced to connect and enable the system DQS certification for all product areas Quality standard in accordance with DIN ISO 9001 In development, production and installation Continued control of the quality standard by means of regular internal and external quality audits Compatible with certificates of other countries: BSI, Great Britain SQS, Switzerland Aib-Vincotte, Belgium ÖQS, Austria Type range 2-24 pole different variants of terminals and headers allow for horizontal, vertical and angled connection of wiring in relation to the PCB (eg. 3 ) 278

wiecon System 8813 mini-pcb terminals 2 to 20 pole terminal and header horizontal or vertical in relation to the PCB total design height: 11 mm, of which only 8 mm is above the PCB in the space saving 3.81 mm pitch conductor size 1. mm 2 suitable for coding: plug terminal with coding pins socket header with coding channels also with locking flange Panel mount header header can be inserted in the unit wall (see inset) plug in connection through the wall header = bush housing threaded bush for vibration resistant screw connection of flange designs can be screwed to the housing wall connecting wiring inside the housing via termi-point or solder connection Inverted version solderable terminal as header with straight and angled socket solder pins can be coded using coding parts in special slots the mounting holder enables locking with the header Top version screw connection and conductor feed in line with connection plug with connection in line with conductor very easy to use in restricted installation conditions with and without integral LED Special types for the control panel: terminal blocks with integral header assembles to.00 mm-pitch can be mounted on DIN rail terminals with header for system 8113 with vertical socket outlet with horizontal socket outlet Materials Metal components made from special alloys and/ or special surface treatments for: clamping part and clamping screw: made from nickel plated brass top version: galvanised and chromated steel socket contact: tinned bronze header and solder pins: made from a high quality copper alloy minimum contact resistance high corrosion protection secure, dynamic clamping function Insulating housing: Polyamide /, used on account of its excellent electrical, chemical and mechanical properties (see facts & DATA section) material in accordance with UL 94 V-0 colour grey, similar to RAL 7032 glass filled for additional reinforcement (no glass reinforcement in tiertype header and solderable parts) Abbreviations for plastic material markings: PA / = Polyamide / PC = Polycarbonate PBT = Polybutylenterephthalate Note: The conductor size and connecting capacity relate to unprepared conductors without ferrules. The rated current specified corresponds to the maximum load of PCB terminal with connected conductor with the given conductor size. The rated voltage is specified in accordance with DIN VDE 01 Part 1 (IEC 0 4-1) Insulation coordination for electrical equipment in low voltage installations and refers to the received condition of the PCB terminals. When fitting PCB terminals to the PCB, the appropriate PCB must be selected and given the relevant dimensions (e.g. as regards the resistance of the PCB to creepage, spacing of the conductors and soldering pads). In addition, the influences of the environment (level of pollution) to which the equipment is to be exposed are to be taken into account. The specified rate voltages for the whole module only apply if the PCB and PCB terminal have been matched correctly and carefully. 279

wiecon PCB Pluggable PCB terminal, rising cage clamp system, pitch 3./3.81 mm cable size 1. mm 2 Rated cross section: 1. mm 2 Rated current: 8 A Wire range: 0.14 1. mm 2 single core/finely stranded V/2. kv/3 overvoltage category III 2 V/2. kv/2 overvoltage category II *90 V/2. kv/1 overvoltage category I * max. 00V for non earthed systems or expected overvoltage 3 kv for L 2.00 mm and 2. kv for 2.0 mm > L 1. mm Rated voltages VDE 01 UL Data CSA Data Approvals Pitch 3. mm 17.40 20.90 24.40 27.90 31.40 34.90 38.40 41.90 4.40 48.90 2.40.90 9.40 2.90.40 7.00. 14.00 17. 21.00 24. 28.00 31. 3.00 38. 42.00 4. 49.00 2..00 3. 7.00. 14.00 17. 21.00 24. 28.00 31. 3.00 38. 42.00 4. 49.00 2. 2 3 4 7 8 9 11 13 14 1 1 M 2. Type 813 B/..., 8813 B/... Connection in line with conductor No. 30 1 AWG 300 V 8 A No. 22 14 AWG 300 V A qw 2.40.323.0 2.40.333.0 2.40.343.0 2.40.33.0 2.40.33.0 2.40.373.0 2.40.383.0 2.40.393.0 2.40.403.0 2.40.413.0 2.40.423.0 2.40.433.0 2.40.443.0 2.40.43.0 2.40.43.0 2.40.023.0 2.40.033.0 2.40.043.0 2.40.03.0 2.40.03.0 2.40.073.0 2.40.083.0 2.40.093.0 2.40.3.0 2.40.113.0 2.40.3.0 2.40.133.0 2.40.143.0 2.40.13.0 2.40.13.0 with screw flange Type 813 B/...F, 8813 B/...F Connection in line with conductor No. 30 1 AWG 300 V 8 A No. 22 14 AWG 300 V A Box Qty GFL G T Pole Part No. Part No. Part No. Part No. qw 2.41.323.0 2.41.333.0 2.41.343.0 2.41.33.0 2.41.33.0 2.41.373.0 2.41.383.0 2.41.393.0 2.41.403.0 2.41.413.0 2.41.423.0 2.41.433.0 2.41.443.0 2.41.43.0 2.41.43.0 M 2. 2.41.023.0 2.41.033.0 2.41.043.0 2.41.03.0 2.41.03.0 2.41.073.0 2.41.083.0 2.41.093.0 2.41.3.0 2.41.113.0 2.41.3.0 2.41.133.0 2.41.143.0 2.41.13.0 2.41.13.0 Pitch 3.81 mm 18.01 21.82 2.3 8.41.22 1.03 3.81 7.2 11.43 2 3 4 2.20.323.0 2.20.333.0 2.20.343.0 2.20.023.0 2.20.033.0 2.20.043.0 2.21.323.0 2.21.333.0 2.21.343.0 2.21.023.0 2.21.033.0 2.21.043.0 29.44 33.2 37.0 19.84 23. 27.4 1.24 19.0 22.8 7 2.20.33.0 2.20.33.0 2.20.373.0 2.20.03.0 2.20.03.0 2.20.073.0 2.21.33.0 2.21.33.0 2.21.373.0 2.21.03.0 2.21.03.0 2.21.073.0 40.87 44.8 48.49 31.27 3.08 38.89 2.7 30.48 34.29 8 9 2.20.383.0 2.20.393.0 2.20.403.0 2.20.083.0 2.20.093.0 2.20.3.0 2.21.383.0 2.21.393.0 2.21.403.0 2.21.083.0 2.21.093.0 2.21.3.0 2.30.11 9.92 42.70 4.1.32 38. 41.91 4.72 11 13 2.20.413.0 2.20.423.0 2.20.433.0 2.20.113.0 2.20.3.0 2.20.133.0 2.21.413.0 2.21.423.0 2.21.433.0 2.21.113.0 2.21.3.0 2.21.133.0 3.73 7.4 71.3 4.13 7.94 1.7 49.3 3.34 7.1 14 1 1 2.20.443.0 2.20.43.0 2.20.43.0 2.20.143.0 2.20.13.0 2.20.13.0 2.21.443.0 2.21.43.0 2.21.43.0 2.21.143.0 2.21.13.0 2.21.13.0 280

wiecon Pluggable PCB terminals, spring clamp system, pitch 3. mm cable size 1. mm 2 Rated cross section: 1. mm 2 Rated current: 8 A Wire range: 0.14 1. mm 2 single core/finely stranded V/2. kv/3 overvoltage category III 2 V/2. kv/2 overvoltage category II *90 V/2. kv/1 overvoltage category I * max. 00V for non earthed systems or expected overvoltage 3 kv for L 2.00 mm and 2. kv for 2.0 mm > L 1. mm 8 8 Type 813 BFK Type 813 SUFK VDE 01 UL Data CSA Data Approvals Pitch 3. mm.90.40 13.90 17.40 20.90 24.40 27.90 31.40 34.90 38.40 41.90 4.40 48.90 2.40.90 3. 7.00. 14.00 17. 21.00 24. 28.00 31. 3.00 38. 42.00 4. 49.00 2. 2 3 4 7 8 9 11 13 14 1 1 No. 30 1 AWG 300 V 8 A No. 22 14 AWG 300 V A qw 2.30.323.0 2.30.333.0 2.30.343.0 2.30.33.0 2.30.33.0 2.30.373.0 2.30.383.0 2.30.393.0 2.30.403.0 2.30.413.0 2.30.423.0 2.30.433.0 2.30.443.0 2.30.43.0 2.30.43.0 2.30.023.0 2.30.033.0 2.30.043.0 2.30.03.0 2.30.03.0 2.30.073.0 2.30.083.0 2.30.093.0 2.30.3.0 2.30.113.0 2.30.3.0 2.30.133.0 2.30.143.0 2.30.13.0 2.30.13.0 No. 30 1 AWG 300 V 8 A No. 22 14 AWG 300 V A Box Qty G T Pole Part No. Part No. Part No. Part No. Type 813 BFK qw Pitch 3. mm Type 813 SUFK 8.40 11.90 1.40 3. 7.00. 2 3 4 2.42.323.0 2.42.333.0 2.42.343.0 2.42.023.0 2.42.033.0 2.42.043.0 18.90 22.40 2.90 14.00 17. 21.00 7 2.42.33.0 2.42.33.0 2.42.373.0 2.42.03.0 2.42.03.0 2.42.073.0 29.40 32.90 3.40 24. 28.00 31. 8 9 2.42.383.0 2.42.393.0 2.42.403.0 2.42.083.0 2.42.093.0 2.42.3.0 39.90 43.40 4.90 3.00 38. 42.00 11 13 2.42.413.0 2.42.423.0 2.42.433.0 2.42.113.0 2.42.3.0 2.42.133.0.40 3.90 7.40 4. 49.00 2. 14 1 1 2.42.443.0 2.42.43.0 2.42.43.0 2.42.143.0 2.42.13.0 2.42.13.0 Accessories: DIN 24 A 0.4 x 2. 0.2.4300.0 281

wiecon PCB Pluggable PCB terminals, rising cage clamp system, Pitch 3.81 mm cable size 1. mm 2 Rated cross section: 1. mm 2 Rated current: 8 A Wire range: 0.14 1. mm 2 single core/finely stranded V/2. kv/3 overvoltage category III 2 V/2. kv/2 overvoltage category II *90 V/2. kv/1 overvoltage category I * max. 00V for non earthed systems or expected overvoltage 3 kv for L 2.00 mm and 2. kv for 2.0 mm > L 1. mm M 2. M 2. Rated voltages VDE 01 UL Data CSA Data Approvals Pitch 3.81 mm 18.01 21.82 2.3 29.44 33.2 37.0 40.87 44.8 48.49 2.30.11 9.92 3.73 7.4 71.3 8.41.22 1.03 19.84 23. 27.4 31.27 3.08 38.89 42.70 4.1.32 4.13 7.94 1.7 3.81 7.2 11.43 1.24 19.0 22.8 2.7 30.48 34.29 38. 41.91 4.72 49.3 3.34 7.1 2 3 4 7 8 9 11 13 14 1 1 Type 8813 B/... VR Connection at 90 to conductor No. 30 1 AWG 300 V 8 A No. 22 14 AWG 300 V A igqw 2.22.323.0 2.22.333.0 2.22.343.0 2.22.33.0 2.22.33.0 2.22.373.0 2.22.383.0 2.22.393.0 2.22.403.0 2.22.413.0 2.22.423.0 2.22.433.0 2.22.443.0 2.22.43.0 2.22.43.0 2.22.023.0 2.22.033.0 2.22.043.0 2.22.03.0 2.22.03.0 2.22.073.0 2.22.083.0 2.22.093.0 2.22.3.0 2.22.113.0 2.22.3.0 2.22.133.0 2.22.143.0 2.22.13.0 2.22.13.0 Type 8813 B/... VL Connection at 90 to conductor No. 30 1 AWG 300 V 8 A No. 22 14 AWG 300 V A igqw Box Qty GFL G T Pole Part No. Part No. Part No. Part No. 2.24.323.0 2.24.333.0 2.24.343.0 2.24.33.0 2.24.33.0 2.24.373.0 2.24.383.0 2.24.393.0 2.24.403.0 2.24.413.0 2.24.423.0 2.24.433.0 2.24.443.0 2.24.43.0 2.24.43.0 2.24.023.0 2.24.033.0 2.24.043.0 2.24.03.0 2.24.03.0 2.24.073.0 2.24.083.0 2.24.093.0 2.24.3.0 2.24.113.0 2.24.3.0 2.24.133.0 2.24.143.0 2.24.13.0 2.24.13.0 282

wiecon with screw flange Type 8813 B/... VR F Connection at 90 to conductor M 2. with screw flange Type 8813 B/... VL F Connection at 90 to conductor M 2. No. 30 1 AWG 300 V 8 A No. 22 14 AWG 300 V A igqw 2.23.323.0 2.23.333.0 2.23.343.0 2.23.33.0 2.23.33.0 2.23.373.0 2.23.383.0 2.23.393.0 2.23.403.0 2.23.413.0 2.23.423.0 2.23.433.0 2.23.443.0 2.23.43.0 2.23.43.0 2.23.023.0 2.23.033.0 2.23.043.0 2.23.03.0 2.23.03.0 2.23.073.0 2.23.083.0 2.23.093.0 2.23.3.0 2.23.113.0 2.23.3.0 2.23.133.0 2.23.143.0 2.23.13.0 2.40.13.0 No. 30 1 AWG 300 V 8 A No. 22 14 AWG 300 V A igqw Part No. Part No. Part No. Part No. 2.2.323.0 2.2.333.0 2.2.343.0 2.2.33.0 2.2.33.0 2.2.373.0 2.2.383.0 2.2.393.0 2.2.403.0 2.2.413.0 2.2.423.0 2.2.433.0 2.2.443.0 2.2.43.0 2.2.43.0 2.2.023.0 2.2.033.0 2.2.043.0 2.2.03.0 2.2.03.0 2.2.073.0 2.2.083.0 2.2.093.0 2.2.3.0 2.2.113.0 2.2.3.0 2.2.133.0 2.2.143.0 2.2.13.0 2.2.13.0 283

wiecon PCB PCB headers, pitch 3./3.81 mm cable size 1. mm 2 Rated current: 8 A V/2. kv/3 overvoltage category III 2 V/2. kv/2 overvoltage category II *90 V/2. kv/1 overvoltage category I Approvals for type 813 have been applied for * max. 00V for non earthed systems or expected overvoltage 3 kv for L 2.00 mm and 2. kv for 2.0 mm > L 1. mm Solder pin 0.8 x 0.8 mm Bore hole Ø 1.2 mm Solder pin 0.8 x 0.8 mm Bore hole Ø 1.2 mm Rated voltages VDE 01 UL Data CSA Data Approvals Pitch 3. mm 17.40 20.90 24.40 27.90 31.40 34.90 38.40 41.90 4.40 48.90 2.40.90 9.40 2.90.40 8.40 11.90 1.40 18.90 22.40 2.90 29.40 32.90 3.40 39.90 43.40 4.90.40 3.90 7.40 3. 7.00. 14.00 17. 21.00 24. 28.00 31. 3.00 38. 42.00 4. 49.00 2. 2 3 4 7 8 9 11 13 14 1 1 Type 813 S/... G, 8813 S/... G Connection vertical to PCB qw 2.4.023.0 2.4.033.0 2.4.043.0 2.4.03.0 2.4.03.0 2.4.073.0 2.4.083.0 2.4.093.0 2.4.3.0 2.4.113.0 2.4.3.0 2.4.133.0 2.4.143.0 2.4.13.0 2.4.13.0 300 V 8 A 300 V A Type 813 S/... W, 8813 S/... W Connection horizontal to PCB Box Qty GFL G T Pole Part No. Part No. Part No. Part No. qw 2.47.023.0 2.47.033.0 2.47.043.0 2.47.03.0 2.47.03.0 2.47.073.0 2.47.083.0 2.47.093.0 2.47.3.0 2.47.113.0 2.47.3.0 2.47.133.0 2.47.143.0 2.47.13.0 2.47.13.0 300 V 8 A 300 V A Pitch 3.81 mm 18.01 21.82 2.3 9.01.82 1.3 3.81 7.2 11.43 2 3 4 2.2.023.0 2.2.033.0 2.2.043.0 2.27.023.0 2.27.033.0 2.27.043.0 29.44 33.2 37.0 20.44 24.2 28.0 1.24 19.0 22.8 7 2.2.03.0 2.2.03.0 2.2.073.0 2.27.03.0 2.27.03.0 2.27.073.0 40.87 44.8 48.49 31.87 3.8 39.49 2.7 30.48 34.29 8 9 2.2.083.0 2.2.093.0 2.2.3.0 2.27.083.0 2.27.093.0 2.27.3.0 2.30.11 9.92 43.30 47.11.92 38. 41.91 4.72 11 13 2.2.113.0 2.2.3.0 2.2.133.0 2.27.113.0 2.27.3.0 2.27.133.0 3.73 7.4 71.3 4.73 8.4 2.3 49.3 3.34 7.1 14 1 1 2.2.143.0 2.2.13.0 2.2.13.0 2.27.143.0 2.27.13.0 2.27.13.0 Accessories: Coding part (branch) 0.1.003.0 0.1.003.0 When using coding parts, the coding fins on the terminal connector should be removed 284

wiecon with screw flange with screw flange Solder pin 0.8 x 0.8 mm Bore hole Ø 1.2 mm Type 813 S/... GF, 8813 S/... GF Connection vertical to PCB Solder pin 0.8 x 0.8 mm Bore hole Ø 1.2 mm Type 813 S/... WF, 8813 S/... WF Connection horizontal to PCB qw 2.4.323.0 2.4.333.0 2.4.343.0 2.4.33.0 2.4.33.0 2.4.373.0 2.4.383.0 2.4.393.0 2.4.403.0 2.4.413.0 2.4.423.0 2.4.433.0 2.4.443.0 2.4.43.0 2.4.43.0 300 V 8 A 300 V A qw Part No. Part No. Part No. Part No. 2.47.323.0 2.47.333.0 2.47.343.0 2.47.33.0 2.47.33.0 2.47.373.0 2.47.383.0 2.47.393.0 2.47.403.0 2.47.413.0 2.47.423.0 2.47.433.0 2.47.443.0 2.47.43.0 2.47.43.0 300 V 8 A 300 V A 2.2.323.0 2.2.333.0 2.2.343.0 2.2.33.0 2.2.33.0 2.2.373.0 2.2.383.0 2.2.393.0 2.2.403.0 2.2.413.0 2.2.423.0 2.2.433.0 2.2.443.0 2.2.43.0 2.2.43.0 2.27.323.0 2.27.333.0 2.27.343.0 2.27.33.0 2.27.33.0 2.27.373.0 2.27.383.0 2.27.393.0 2.27.403.0 2.27.413.0 2.27.423.0 2.27.433.0 2.27.443.0 2.27.43.0 2.27.43.0 0.1.003.0 0.1.003.0 28

wiecon PCB Pluggable PCB terminals, rising cage clamp, pitch.00/.08 mm cable size 2. mm 2 Rated cross section: 2. mm 2 Rated current: A Wire range: 0.14 2. mm 2 single core/finely stranded 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I Rated voltages VDE 01 UL Data CSA Data Approvals 20 2 30 3 40 4 0 70 7 80 8 90 1 20 2 30 3 40 4 0 70 7 80 1 20 2 30 3 40 4 0 70 7 2 3 4 7 8 9 11 13 14 1 1. Type 8113 B/... 8213 B/... rconnection in line with conductor No. 22 AWG 300 V 1 A No. 22 AWG 300 V 1 A üiqwd 2.320.323.0 2.320.333.0 2.320.343.0 2.320.33.0 2.320.33.0 2.320.373.0 2.320.383.0 2.320.393.0 2.320.403.0 2.320.413.0 2.320.423.0 2.320.433.0 2.320.443.0 2.320.43.0 2.320.43.0 No. 22 AWG 300 V 1 A No. 22 AWG 300 V 1 A üiqwd Box Qty GFL G T Pole Part No. Part No. Part No. Part No. Pitch.00 mm Type 8113 17 to 24 pole on request M 3 2.320.023.0 2.320.033.0 2.320.043.0 2.320.03.0 2.320.03.0 2.320.073.0 2.320.083.0 2.320.093.0 2.320.3.0 2.320.113.0 2.320.3.0 2.320.133.0 2.320.143.0 2.320.13.0 2.320.13.0 2.322.323.0 2.322.333.0 2.322.343.0 2.322.33.0 2.322.33.0 2.322.373.0 2.322.383.0 2.322.393.0 2.322.403.0 2.322.413.0 2.322.423.0 2.322.433.0 2.322.443.0 2.322.43.0 2.322.43.0 M 3 with screw flange Type 8113 B/... F, 8213 B/... F Connection in line with conductor 17 to 22 pole on request 2.322.023.0 2.322.033.0 2.322.043.0 2.322.03.0 2.322.03.0 2.322.073.0 2.322.083.0 2.322.093.0 2.322.3.0 2.322.113.0 2.322.3.0 2.322.133.0 2.322.143.0 2.322.13.0 2.322.13.0 Pitch.08 mm Type 8213 20.32 2.40 30.48.1 1.24 20.32.08.1 1.24 2 3 4 2.340.323.0 2.340.333.0 2.340.343.0 2.340.023.0 2.340.033.0 2.340.043.0 2.323.323.0 2.323.333.0 2.323.343.0 2.323.023.0 2.323.033.0 2.323.043.0 3. 40.4 4.72 2.40 30.48 3. 20.32 2.40 30.48 7 2.340.33.0 2.340.33.0 2.340.373.0 2.340.03.0 2.340.03.0 2.340.073.0 2.323.33.0 2.323.33.0 2.323.373.0 2.323.03.0 2.323.03.0 2.323.073.0.80.88 0.9 40.4 4.72.80 3. 40.4 4.72 8 9 2.340.383.0 2.340.393.0 2.340.403.0 2.340.083.0 2.340.093.0 2.340.3.0 2.323.383.0 2.323.393.0 2.323.403.0 2.323.083.0 2.323.093.0 2.323.3.0.04 71. 7.20.88 0.9.04.80.88 0.9 11 13 2.340.413.0 2.340.423.0 2.340.433.0 2.340.113.0 2.340.3.0 2.340.133.0 2.323.413.0 2.323.423.0 2.323.433.0 2.323.113.0 2.323.3.0 2.323.133.0 81.28 8.3 91.44 71. 7.20 81.28.04 71. 7.20 14 1 1 2.340.443.0 2.340.43.0 2.340.43.0 2.340.143.0 2.340.13.0 2.340.13.0 2.323.443.0 2.323.43.0 2.323.43.0 17 to 22 pole on request 2.323.143.0 2.323.13.0 2.323.13.0 Accessories: Coding part (branch) 0.1.913.0 0.1.913.0 28

wiecon Rated cross section: 2. mm 2 Rated current: A based on ambient temperature of 20 C, rated cross-section and max. number of poles G T 23,3 Wire range: 0. 2. mm 2 single core/finely stranded,08 1,4 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 400 V/4 kv/1 overvoltage category I M 2, 8 Type 8213 B/...S Rated voltages VDE 01/1.89 UL Data CSA Data Approvals Pitch.08 mm.1 1.24 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 81.28.08.1 1.24 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 2 3 4 7 8 9 11 13 14 1 1 No. 28 AWG 300 V A No. 28 AWG 300 V A qw Box Qty GFL G T Pole Part No. Part No. 27.341.323.0 27.341.333.0 27.341.343.0 27.341.33.0 27.341.33.0 27.341.373.0 27.341.383.0 27.341.393.0 27.341.403.0 27.341.413.0 27.341.423.0 27.341.433.0 27.341.443.0 27.341.43.0 27.341.43.0 17 to 24 pole on request Coding available upon request 287

wiecon PCB Pluggable PCB terminals, rising cage clamp system, Pitch 7./7.2 mm cable size 2. mm 2 Rated cross section: 2. mm 2 Rated current: A Wire range: 0.14 2. mm 2 single core/finely stranded 400 V/4 kv/3 overvoltage category III 90 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I Rated voltages VDE 01 UL Data CSA Data Approvals 2 3 4 7 8 9 11. Type 8313 B/..., 8413 B/... Connection in line with conductor 2.30.323.0 2.30.333.0 2.30.343.0 2.30.33.0 2.30.33.0 2.30.373.0 2.30.383.0 2.30.393.0 2.30.403.0 2.30.413.0 2.30.423.0 M 3 No. 22 AWG 300 V 1 A No. 22 AWG 300 V 1 A üiqwd 2.30.023.0 2.30.033.0 2.30.043.0 2.30.03.0 2.30.03.0 2.30.073.0 2.30.083.0 2.30.093.0 2.30.3.0 2.30.113.0 2.30.3.0 No. 22 AWG 300 V 1 A No. 22 AWG 300 V 1 A üiqwd Box Qty GFL G T Pole Part No. Part No. Part No. Part No. Pitch 7. mm Type 8313 2.4 33.04 40.4 48.04.4 3.04 70.4 78.04 8.4 93.04.4 13.00 20. 28.00 3. 43.00. 8.00. 73.00 80. 88.00 7. 1.00 22. 30.00 37. 4.00 2. 0.00 7. 7.00 82. 2.324.223.0 2.324.233.0 2.324.243.0 2.324.23.0 2.324.23.0 2.324.273.0 2.324.283.0 2.324.293.0 2.324.303.0 2.324.313.0 2.324.323.0 2.324.023.0 2.324.033.0 2.324.043.0 2.324.03.0 2.324.03.0 2.324.073.0 2.324.083.0 2.324.093.0 2.324.3.0 2.324.113.0 2.324.3.0 M 3 with screw flange Type 8313 B/... F, 8413 B/... F Connection in line with conductor Pitch 7.2 mm Type 8413 2. 33.28 40.90 13. 20.74 28.3 7.2 1.24 22.8 2 3 4 2.380.323.0 2.380.333.0 2.380.343.0 2.380.023.0 2.380.033.0 2.380.043.0 2.324.23.0 2.324.33.0 2.324.43.0 2.324.423.0 2.324.433.0 2.324.443.0 48.2.14 3.7 3.98 43.0 1.22 30.48 38. 4.72 7 2.380.33.0 2.380.33.0 2.380.373.0 2.380.03.0 2.380.03.0 2.380.073.0 2.324.3.0 2.324.3.0 2.324.73.0 2.324.43.0 2.324.43.0 2.324.473.0 71.38 79.00 8.2 8.84.4 74.08 3.34 0.9 8.8 8 9 2.380.383.0 2.380.393.0 2.380.403.0 2.380.083.0 2.380.093.0 2.380.3.0 2.324.83.0 2.324.93.0 2.324.703.0 2.324.483.0 2.324.493.0 2.324.3.0 94.24 1.8 81.70 89.32 7.20 83.82 11 2.380.413.0 2.380.423.0 2.380.113.0 2.380.3.0 2.324.713.0 2.324.723.0 2.324.13.0 2.324.23.0 Accessories: Coding part (branch) 0.1.913.0 0.1.913.0 288

wiecon Pluggable PCB terminals, rising cage clamp system, Pitch.00/.08 mm cable size 2. mm 2 Rated cross section: 2. mm 2 Rated current: A Wire range: 0.14 2. mm 2 single core/finely stranded 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I M 3 M 3 Rated voltages VDE 01 UL Data CSA Data Approvals 1 20 2 30 3 40 4 0 70 7 80.1 1.24 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 81.28 1 20 2 30 3 40 4 0 70 7.08.1 1.24 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 2 3 4 7 8 9 11 13 14 1 1 17 to 24 pole on request 2 3 4 7 8 9 11 13 14 1 1 No. 22 AWG 300 V 1 A No. 22 AWG 300 V 1 A üiqwd 2.32.323.0 2.32.333.0 2.32.343.0 2.32.33.0 2.32.33.0 2.32.373.0 2.32.383.0 2.32.393.0 2.32.403.0 2.32.413.0 2.32.423.0 2.32.433.0 2.32.443.0 2.32.43.0 2.32.43.0 2.34.323.0 2.34.333.0 2.34.343.0 2.34.33.0 2.34.33.0 2.34.373.0 2.34.383.0 2.34.393.0 2.34.403.0 2.34.413.0 2.34.423.0 2.34.433.0 2.34.443.0 2.34.43.0 2.34.43.0 2.32.023.0 2.32.033.0 2.32.043.0 2.32.03.0 2.32.03.0 2.32.073.0 2.32.083.0 2.32.093.0 2.32.3.0 2.32.113.0 2.32.3.0 2.32.133.0 2.32.143.0 2.32.13.0 2.32.13.0 2.34.023.0 2.34.033.0 2.34.043.0 2.34.03.0 2.34.03.0 2.34.073.0 2.34.083.0 2.34.093.0 2.34.3.0 2.34.113.0 2.34.3.0 2.34.133.0 2.34.143.0 2.34.13.0 2.34.13.0 No. 22 AWG 300 V 1 A No. 22 AWG 300 V 1 A üiqwd Box Qty G T Pole Part No. Part No. Part No. Part No. Pitch.00 mm Type 8113 Pitch.08 mm Type 8213 17 to 24 pole on request Type 8113 B/... VR, 8213 B/... VR Connection 90 to conductor Type 8113 B/... VL, 8213 B/... VL Connection 90 to conductor 2.32.323.0 2.32.333.0 2.32.343.0 2.32.33.0 2.32.33.0 2.32.373.0 2.32.383.0 2.32.393.0 2.32.403.0 2.32.413.0 2.32.423.0 2.32.433.0 2.32.443.0 2.32.43.0 2.32.43.0 2.34.323.0 2.34.333.0 2.34.343.0 2.34.33.0 2.34.33.0 2.34.373.0 2.34.383.0 2.34.393.0 2.34.403.0 2.34.413.0 2.34.423.0 2.34.433.0 2.34.443.0 2.34.43.0 2.34.43.0 2.32.023.0 2.32.033.0 2.32.043.0 2.32.03.0 2.32.03.0 2.32.073.0 2.32.083.0 2.32.093.0 2.32.3.0 2.32.113.0 2.32.3.0 2.32.133.0 2.32.143.0 2.32.13.0 2.32.13.0 2.34.023.0 2.34.033.0 2.34.043.0 2.34.03.0 2.34.03.0 2.34.073.0 2.34.083.0 2.34.093.0 2.34.3.0 2.34.113.0 2.34.3.0 2.34.133.0 2.34.143.0 2.34.13.0 2.34.13.0 Accessories: Coding part (branch) 0.1.913.0 0.1.913.0 289

wiecon PCB Pluggable PCB terminals, rising cage clamp system, pitch 7.2 mm cable size 2. mm 2 Rated cross section: 2. mm 2 Rated current: A Wire range: 0.14 2. mm 2 single core/finely stranded 400 V/4 kv/3 overvoltage category III 90 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I M 3 M 3 Rated voltages VDE 01 UL Data CSA Data Approvals Type 8413 B/... VR Connection 90 to conductor No. 22 AWG 300 V 1 A No. 22 AWG 300 V 1 A üiqwd Type 8413 B/... VL Connection 90 to conductor No. 22 AWG 300 V 1 A No. 22 14 AWG 300 V 1 A üiqwd Box Qty G T Pole Part No. Part No. Part No. Part No. Pitch 7.2 mm Type 8413 13. 20.74 28.3 7.2 1.24 22.8 2 3 4 2.38.223.0 2.38.233.0 2.38.243.0 2.38.023.0 2.38.033.0 2.38.043.0 2.38.223.0 2.38.233.0 2.38.243.0 2.38.023.0 2.38.033.0 2.38.043.0 3.98 43.0 1.22 30.48 38. 4.72 7 2.38.23.0 2.38.23.0 2.38.273.0 2.38.03.0 2.38.03.0 2.38.073.0 2.38.23.0 2.38.23.0 2.38.273.0 2.38.03.0 2.38.03.0 2.38.073.0 8.84.4 74.08 3.34 0.9 8.8 8 9 2.38.283.0 2.38.293.0 2.38.303.0 2.38.083.0 2.38.093.0 2.38.3.0 2.38.283.0 2.38.293.0 2.38.303.0 2.38.083.0 2.38.093.0 2.38.3.0 81.70 89.32 7.20 83.82 11 2.38.313.0 2.38.323.0 2.38.113.0 2.38.3.0 2.38.313.0 2.38.323.0 2.38.113.0 2.38.3.0 Accessories: Coding part (branch) 0.1.913.0 0.1.913.0 290

wiecon Crimp connection Rated cross section: 2. mm 2 Rated current: A when using a 1.0 mm 2 Leiter A when using a 2. mm 2 Leiter Contact for wire range: 0. 1.0 mm 2 finely stranded (Diameter of insulation 1.4 2.3 mm) Wire range: 1. 2. mm 2 finely stranded (Diameter of insulation 1.4 3.1 mm) 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I 4 Type 8113 BK Rated voltages VDE 01 UL Data CSA Data Approvals Pitch.00 mm 1 20 2 30 3 40 4 0 70 7 80 1 20 2 30 3 40 4 0 70 7 2 3 4 7 8 9 11 13 14 1 1 w Box Qty G T Pole Part No. Part No. Part No. Part No. 01.00.323.0 01.00.333.0 01.00.343.0 01.00.33.0 01.00.33.0 01.00.373.0 01.00.383.0 01.00.393.0 01.00.403.0 01.00.413.0 01.00.423.0 01.00.433.0 01.00.443.0 01.00.43.0 01.00.43.0 17 to 24 pole on request 01.00.023.0 01.00.033.0 01.00.043.0 01.00.03.0 01.00.03.0 01.00.073.0 01.00.083.0 01.00.093.0 01.00.3.0 01.00.113.0 01.00.3.0 01.00.133.0 01.00.143.0 01.00.13.0 01.00.13.0 Accessories: Crimp contacts Single contacts Single contacts 0 0 0. 1.0 mm 2 1. 2. mm 2 02..9.0 02..1729.0 Strip Strip 4000 30 0. 1.0 mm 2 1. 2. mm 2 02..100.0 02..1700.0 Crimping tool: Crimping tool Crimp dies 9.1.0800.0 0.2.20.0 291

wiecon PCB Pluggable PCB terminals spring clamp system pitch.00/.08 mm Rated cross section*: 2. mm 2 Rated current: A Wire range: 0.14 2. mm 2 single core/finely stranded 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I * When using ferrules for wire range 2. mm, only ferrules with part number 2. mm 0.9.7.0 should be used. 11 11 Type 8113/8213 BFK Type 8113/8213 BFK.../F Rated voltages VDE 01 UL Data CSA Data Approvals Pitch.00 mm Pitch.08 mm 22.4 27.4 32.4 37.4 42.4 47.4 2.4 7.4 2.4 7.4 72.4 77.4 82.4 87.4 92.4 22.70 27.78 32.8 37.94 43.02 48. 3.18 8.2 3.34 8.42 73. 78.8 83. 88.74 93.82 1 20 2 30 3 40 4 0 70 7 80.1 1.24 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 81.28 1 20 2 30 3 40 4 0 70 7.08.1 1.24 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 2 3 4 7 8 9 11 13 14 1 1 2 3 4 7 8 9 11 13 14 1 1 No. 22 AWG 300 V A q 2.820.323.0 2.820.333.0 2.820.343.0 2.820.33.0 2.820.33.0 2.820.373.0 2.820.383.0 2.820.393.0 2.820.403.0 2.820.413.0 2.820.423.0 2.820.433.0 2.820.443.0 2.820.43.0 2.820.43.0 17 to 24 pole on request 2.840.323.0 2.840.333.0 2.840.343.0 2.840.33.0 2.840.33.0 2.840.373.0 2.840.383.0 2.840.393.0 2.840.403.0 2.840.413.0 2.840.423.0 2.840.433.0 2.840.443.0 2.840.43.0 2.840.43.0 2.820.023.0 2.820.033.0 2.820.043.0 2.820.03.0 2.820.03.0 2.820.073.0 2.820.083.0 2.820.093.0 2.820.3.0 2.820.113.0 2.820.3.0 2.820.133.0 2.820.143.0 2.820.13.0 2.820.13.0 2.840.023.0 2.840.033.0 2.840.043.0 2.840.03.0 2.840.03.0 2.840.073.0 2.840.083.0 2.840.093.0 2.840.3.0 2.840.113.0 2.840.3.0 2.840.133.0 2.840.143.0 2.840.13.0 2.840.13.0 No. 22 AWG 300 V A Box Qty GFL G T Pole Part No. Part No. Part No. Part No. 17 to 24 pole on request 2.821.323.0 2.821.333.0 2.821.343.0 2.821.33.0 2.821.33.0 2.821.373.0 2.821.383.0 2.821.393.0 2.821.403.0 2.821.413.0 2.821.423.0 2.821.433.0 2.821.443.0 2.821.43.0 2.821.43.0 17 to 24 pole on request 2.841.323.0 2.841.333.0 2.841.343.0 2.841.33.0 2.841.33.0 2.841.373.0 2.841.383.0 2.841.393.0 2.841.403.0 2.841.413.0 2.841.423.0 2.841.433.0 2.841.443.0 2.841.43.0 2.841.43.0 17 to 24 pole on request 2.821.023.0 2.821.033.0 2.821.043.0 2.821.03.0 2.821.03.0 2.821.073.0 2.821.083.0 2.821.093.0 2.821.3.0 2.821.113.0 2.821.3.0 2.821.133.0 2.821.143.0 2.821.13.0 2.821.13.0 2.841.023.0 2.841.033.0 2.841.043.0 2.841.03.0 2.841.03.0 2.841.073.0 2.841.083.0 2.841.093.0 2.841.3.0 2.841.113.0 2.841.3.0 2.841.133.0 2.841.143.0 2.841.13.0 2.841.13.0 292

wiecon Pluggable PCB terminal - spring clamp system pitch.08 mm cable size 2. mm 2 Rated cross section*: 2. mm 2 Rated current: A Wire range: 0.14 2. mm 2 single core/finely stranded 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I * When using ferrules for wire range 2. mm, only ferrules with part number 2. mm 0.9.7.0 should be used. 11 Type 8213 SUFK Rated voltages VDE 01 UL Data CSA Data Approvals in preparation Pitch.08 mm.1 1.24 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 81.28.08.1 1.24 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 2 3 4 7 8 9 11 13 14 1 1 No. 22 AWG 300 V A No. 22 AWG 300 V A Box Qty G T Pole Part No. Part No. 17 to 24 pole on request q 2.87.323.0 2.87.333.0 2.87.343.0 2.87.33.0 2.87.33.0 2.87.373.0 2.87.383.0 2.87.393.0 2.87.403.0 2.87.413.0 2.87.423.0 2.87.433.0 2.87.443.0 2.87.43.0 2.87.43.0 2.87.023.0 2.87.033.0 2.87.043.0 2.87.03.0 2.87.03.0 2.87.073.0 2.87.083.0 2.87.093.0 2.87.3.0 2.87.113.0 2.87.3.0 2.87.133.0 2.87.143.0 2.87.13.0 2.87.13.0 Accessories: Coding part (branch) Screwdriver DIN 24 A 0. x 3. 0.1.913.0 0.2.4000.0 293

wiecon PCB Pluggable PCB terminal - spring clamp system pitch 7.2 mm Rated cross section*: 2. mm 2 Rated current: A Wire range: 0.14 2. mm 2 single core/finely stranded 400 V/ kv/3 overvoltage category III ** 90 V/ kv/2 overvoltage category II 0 V/ kv/1 overvoltage category I * When using ferrules for wire range 2. mm, only ferrules with part number 0.9.7.0 should be used. ** max. 00 V for non-earthed systems or expected overvoltage 3 kv for L 2.00 mm and 2. kv for 2.0 mm > L 1. mm 11 11 Type 8413 BFK Type 8413 BFK/... F VDE 01 UL Data CSA Data Approvals No. 22 AWG 300 V A No. 22 AWG 300 V A Pitch 7.2 mm Box Qty GFL G T Pole Part No. Part No. Part No. Part No. 2. 33.28 40.90 48.2.14 3.7 71.38 79.00 8.2 94.24 1.8 13. 20.74 28.3 3.98 43.0 1.22 8.84.4 74.08 81.70 89.32 7.2 1.24 22.8 30.48 38. 4.72 3.34 0.9 8.8 7.20 83.82 2 3 4 7 8 9 11 2.880.323.0 2.880.333.0 2.880.343.0 2.880.33.0 2.880.33.0 2.880.373.0 2.880.383.0 2.880.393.0 2.880.403.0 2.880.413.0 2.880.423.0 2.880.023.0 2.880.033.0 2.880.043.0 2.880.03.0 2.880.03.0 2.880.073.0 2.880.083.0 2.880.093.0 2.880.3.0 2.880.113.0 2.880.3.0 2.881.323.0 2.881.333.0 2.881.343.0 2.881.33.0 2.881.33.0 2.881.373.0 2.881.383.0 2.881.393.0 2.881.403.0 2.881.413.0 2.881.423.0 2.881.023.0 2.881.033.0 2.881.043.0 2.881.03.0 2.881.03.0 2.881.073.0 2.881.083.0 2.881.093.0 2.881.3.0 2.881.113.0 2.881.3.0 294

wiecon Pluggable PCB terminal, inverted header, solder version pitch.08 mm cable size Rated current: A 2 V/4 kv/3 overvoltage category III *90 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I * max. 00V for non earthed systems or expected overvoltage 3 kv for L 2.00 mm and 2. kv for 2.0 mm > L 1. mm Solder pin 0. x 1 mm Drill hole Ø 1.2 mm Solder pin 0. x 1 mm Drill hole Ø 1.2 mm Rated voltages VDE 01 UL Data CSA Data Approvals Type 8213 BL/... G Connection vertical to PCB üiqwd 300 V 1 A 300 V 1 A Type 8213 BL/... W Connection vertical to PCB üiqwd Box Qty G T Pole Part No. Part No. Part No. Part No. 300 V 1 A 300 V 1 A Pitch.08 mm.3 17.44 22.2.08.1 1.24 2 3 4 2.342.323.0 2.342.333.0 2.342.343.0 2.342.023.0 2.342.033.0 2.342.043.0 2.343.323.0 2.343.333.0 2.343.343.0 2.343.023.0 2.343.033.0 2.343.043.0 27.0 32.8 37.7 20.32 2.40 30.48 7 2.342.33.0 2.342.33.0 2.342.373.0 2.342.03.0 2.342.03.0 2.342.073.0 2.343.33.0 2.343.33.0 2.343.373.0 2.343.03.0 2.343.03.0 2.343.073.0 42.84 47.92 3.00 3. 40.4 4.72 8 9 2.342.383.0 2.342.393.0 2.342.403.0 2.342.083.0 2.342.093.0 2.342.3.0 2.343.383.0 2.343.393.0 2.343.403.0 2.343.083.0 2.343.093.0 2.343.3.0 8.08 3.1 8.24.80.88 0.9 11 13 2.342.413.0 2.342.423.0 2.342.433.0 2.342.113.0 2.342.3.0 2.342.133.0 2.343.413.0 2.343.423.0 2.343.433.0 2.343.113.0 2.343.3.0 2.343.133.0 73.32 78.40 83.48.04 71. 7.20 14 1 1 17 to 24 pole on request 2.342.443.0 2.342.43.0 2.342.43.0 2.342.143.0 2.342.13.0 2.342.13.0 2.343.443.0 2.343.43.0 2.343.43.0 2.343.143.0 2.343.13.0 2.343.13.0 Accessories: Coding part (branch) Mounting bracket 0.1.913.0 Z.23.783.0 0.1.913.0 Z.23.773.0 29

wiecon PCB Pluggable PCB terminals, TOP connection system pitch.00/.08 mm Rated cross section: 2. mm 2 Rated current: A, On state current 2.2 ma per LED Rated voltages: Type 8113 B/... TOP, 8213 B/... TOP 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I Type 8113 B/... TOP LED 24 V/4 kv/3 overvoltage category III 24 V/4 kv/2 overvoltage category II 24 V/4 kv/1 overvoltage category I Wire range: 0.14 2. mm 2 single core/finely stranded M 2. 9. TOP connector with LED common negative pole M 2. 9. Rated voltages VDE 01 UL Data CSA Data Approvals Pitch.00 mm 2 2 200 200 200 1 20 2 30 3 40 4 0 70 7 80 1 20 2 30 3 40 4 0 70 7 2 3 4 7 8 9 11 13 14 1 1 117 to 24 pole on request Type 8113 B/... TOP, 8213 B/... TOP Connection in line with conductor No. 22 AWG 300 V 1 A No. 22 AWG 300 V 1 A üiqwd 2.220.323.0 2.220.333.0 2.220.343.0 2.220.33.0 2.220.33.0 2.220.373.0 2.220.383.0 2.220.393.0 2.220.403.0 2.220.413.0 2.220.423.0 2.220.433.0 2.220.443.0 2.220.43.0 2.220.43.0 2.220.023.0 2.220.033.0 2.220.043.0 2.220.03.0 2.220.03.0 2.220.073.0 2.220.083.0 2.220.093.0 2.220.3.0 2.220.113.0 2.220.3.0 2.220.133.0 2.220.143.0 2.220.13.0 2.220.13.0 No. 22 AWG 24 V 1 A No. 22 AWG 24 V 1 A üiqwd Box Qty TOP G T Pole Part No. Part No. Part No. Part No. Type 8113 B/... TOP LED Connection in line with conductor 2.230.323.0 2.230.333.0 2.230.343.0 2.230.33.0 2.230.33.0 2.230.373.0 2.230.383.0 2.230.393.0 2.230.403.0 2.230.413.0 2.230.423.0 2.230.433.0 2.230.443.0 2.230.43.0 2.230.43.0 2.230.023.0 2.230.033.0 2.230.043.0 2.230.03.0 2.230.03.0 2.230.073.0 2.230.083.0 2.230.093.0 2.230.3.0 2.230.113.0 2.230.3.0 2.230.133.0 2.230.143.0 2.230.13.0 2.230.13.0 Pitch.08 mm 2 2 200.1 1.24 20.32.08.1 1.24 2 3 4 2.240.323.0 2.240.333.0 2.240.343.0 2.240.023.0 2.240.033.0 2.240.043.0 200 200 2.40 30.48 3. 20.32 2.40 30.48 7 2.240.33.0 2.240.33.0 2.240.373.0 2.240.03.0 2.240.03.0 2.240.073.0 40.4 4.72.80 3. 40.4 4.72 8 9 2.240.383.0 2.240.393.0 2.240.403.0 2.240.083.0 2.240.093.0 2.240.3.0.88 0.9.04.80.88 0.9 11 13 2.240.413.0 2.240.423.0 2.240.433.0 2.240.113.0 2.240.3.0 2.240.133.0 71. 7.20 81.28.04 71. 7.20 14 1 1 17 to 24 pole on request 2.240.443.0 2.240.43.0 2.240.43.0 2.240.143.0 2.240.13.0 2.240.13.0 29

wiecon PCB headers pitch.00/.08 mm cable size Rated current: A 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I Solder pin 1 x 1 mm Drill hole Ø 1.4 mm Solder pin 1 x 1 mm Drill hole Ø 1.4 mm Rated voltages VDE 01 UL Data CSA Data Approvals Pitch.00 mm.1 1.24 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 81.28 1 20 2 30 3 40 4 0 70 7 2 3 4 7 8 9 11 13 14 1 1 17 to 24 pole on request closed version Type 8113 S/... G, 8213 S/... G Connection vertical to PCB üiqwd 2.330.323.0 2.330.333.0 2.330.343.0 2.330.33.0 2.330.33.0 2.330.373.0 2.330.383.0 2.330.393.0 2.330.403.0 2.330.413.0 2.330.423.0 2.330.433.0 2.330.443.0 2.330.43.0 2.330.43.0 300 V 1 A 300 V 1 A open version Type 8113 S/... GOF, 8213 S/... GOF Connection vertical to PCB üiqwd Box Qty G T Pole Part No. G T Part No. 1 20 2 30 3 40 4 0 70 7 80 1 20 2 30 3 40 4 0 70 7 99.202.999.0 99.203.999.0 99.204.999.0 99.20.999.0 99.20.999.0 99.207.999.0 99.208.999.0 99.209.999.0 99.2.999.0 99.211.999.0 99.2.999.0 99.213.999.0 99.214.999.0 99.21.999.0 99.21.999.0 300 V 1 A 300 V 1 A 17 to 24 pole on request Pitch.08 mm 11. 1.4 21.72.08.1 1.24 2 3 4 2.3.323.0 2.3.333.0 2.3.343.0.1 1.24 20.32.08.1 1.24 99.232.999.1 99.233.999.1 99.234.999.1 2.80 31.88 3.9 20.32 2.40 30.48 7 2.3.33.0 2.3.33.0 2.3.373.0 2.40 30.48 3. 20.32 2.40 30.48 99.23.999.1 99.23.999.1 99.237.999.1 42.04 47. 2.20 3. 40.4 4.72 8 9 2.3.383.0 2.3.393.0 2.3.403.0 40.4 4.72.80 3. 40.4 4.72 99.238.999.1 99.239.999.1 99.240.999.1 7.28 2.3 7.44.80.88 0.9 11 13 2.3.413.0 2.3.423.0 2.3.433.0.88 0.9.04.80.88 0.9 99.241.999.1 99.242.999.1 99.243.999.1 72.2 77.0 82.8.04 71. 7.20 14 1 1 17 to 24 pole on request 2.3.443.0 2.3.43.0 2.3.43.0 70. 7.20 80.28.04 71. 7.20 99.244.999.1 99.24.999.1 99.24.999.1 17 to 24 pole on request Accessories: Coding part (branch) Mounting bracket assembly - for double ended screw fixing of header 0.1.003.0 Z.23.243.0 0.1.003.0 297

wiecon PCB PCB headers pitch.00/.08 mm cable size Rated current: A Rated voltages: 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I Solder pin 1 x 1 mm Drill hole Ø 1.4 mm Solder pin 1 x 1 mm Drill hole Ø 1.4 mm Rated voltages VDE 01 UL Data CSA Data Approvals Pitch.00 mm Pitch.08 mm 11.40 1.40 21.40 2.40 31.40 3.40 41.40 4.40 1.40.40 1.40.40 71.40 7.40 81.40 1 20 2 30 3 40 4 0 70 7 11..08 1.4.1 21.72 1.24 2.80 20.32 31.88 2.40 3.9 30.48 42.04 3. 47. 40.4 2.20 4.72 7.28.80 2.3.88 7.44 0.9 72.2.04 77.0 71. 82.8 7.20 2 3 4 7 8 9 11 13 14 1 1 2 3 4 7 8 9 11 13 14 1 1 with screw flange Type 8113 S/... GF, 8213 S/... GF Connection vertical to PCB üiqwd 2.338.323.0 2.338.333.0 2.338.343.0 2.338.33.0 2.338.33.0 2.338.373.0 2.338.383.0 2.338.393.0 2.338.403.0 2.338.413.0 2.338.423.0 2.338.433.0 2.338.443.0 2.338.43.0 2.338.43.0 17 to 22 pole on request 2.39.323.0 2.39.333.0 2.39.343.0 2.39.33.0 2.39.33.0 2.39.373.0 2.39.383.0 2.39.393.0 2.39.403.0 2.39.413.0 2.39.423.0 2.39.433.0 2.39.443.0 2.39.43.0 2.39.43.0 300 V 1 A 300 V 1 A üiqwd Box Qty G T Pole Part No. GFL T Part No. closed version Type 8113 S/... W, 8213 S/... W Connection horizontal to PCB 20 2 30 3 40 4 0 70 7 80 8 90 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 81.28 8.3 91.44 1 20 2 30 3 40 4 0 70 7.08.1 1.24 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 2.332.323.0 2.332.333.0 2.332.343.0 2.332.33.0 2.332.33.0 2.332.373.0 2.332.383.0 2.332.393.0 2.332.403.0 2.332.413.0 2.332.423.0 2.332.433.0 2.332.443.0 2.332.43.0 2.332.43.0 2.32.323.0 2.32.333.0 2.32.343.0 2.32.33.0 2.32.33.0 2.32.373.0 2.32.383.0 2.32.393.0 2.32.403.0 2.32.413.0 2.32.423.0 2.32.433.0 2.32.443.0 2.32.43.0 2.32.43.0 300 V 1 A 300 V 1 A 17 to 24 pole on request 17 to 22 pole on request 17 to 24 pole on request Accessories: Coding part (branch) Mounting bracket assembly - for double ended screw fixing of header 298 0.1.003.0 Z.23.243.0 0.1.003.0 Z.23.243.0

wiecon PCB header pitch.00/.08 mm cable size Rated current: A 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I Rated voltages VDE 01 UL Data CSA Data Approvals Pitch.00 mm 11.40 1.40 21.40 2.40 31.40 3.40 41.40 4.40 1.40.40 1.40.40 71.40 7.40 81.40 1 20 2 30 3 40 4 0 70 7 2 3 4 7 8 9 11 13 14 1 1 17 to 24 pole on request iqwd 99.22.999.0 99.23.999.0 99.24.999.0 99.2.999.0 99.2.999.0 99.27.999.0 99.28.999.0 99.29.999.0 99.270.999.0 99.271.999.0 99.272.999.0 99.273.999.0 99.274.999.0 99.27.999.0 99.27.999.0 Solder pin 1 x 1 mm Drill hole Ø 1.4 mm open version Type 8113 S/... WOF, 8213 S/... WOF Connection horizontal to PCB 300 V 1 A 300 V 1 A with screw flange Type 8113 S/... WF, 8213 S/... WF Connection horizontal to PCB üiqwd Box Qty G T Pole Part No. GFL G T Part No. 20 2 30 3 40 4 0 70 7 80 8 90 1 20 2 30 3 40 4 0 70 7 80 1 20 2 30 3 40 4 0 70 7 Solder pin 1 x 1 mm Drill hole Ø 1.4 mm 2.339.323.0 2.339.333.0 2.339.343.0 2.339.33.0 2.339.33.0 2.339.373.0 2.339.383.0 2.339.393.0 2.339.403.0 2.339.413.0 2.339.423.0 2.339.433.0 2.339.443.0 2.339.43.0 2.339.43.0 300 V 1 A 300 V 1 A 17 to 22 pole on request Pitch.08 mm 11..08 1.4.1 21.72 1.24 2 3 4 99.202.999.2 99.203.999.2 99.204.999.2 20.32 2.40 30.48.1 1.24 20.32.08.1 1.24 2.38.323.0 2.38.333.0 2.38.343.0 2.80 20.32 31.88 2.40 3.9 30.48 7 99.20.999.2 99.20.999.2 99.207.999.2 3. 40.4 4.72 2.40 30.48 3. 20.32 2.40 30.48 2.38.33.0 2.38.33.0 2.38.373.0 42.04 3. 47. 40.4 2.20 4.72 8 9 99.208.999.2 99.209.999.2 99.2.999.2.80.88 0.9 40.4 4.72.80 3. 40.4 4.72 2.38.383.0 2.38.393.0 2.38.403.0 7.28.80 2.3.88 7.44 0.9 11 13 99.211.999.2 99.2.999.2 99.213.999.2.04 71. 7.20.88 0.9.04.80.88 0.9 2.38.413.0 2.38.423.0 2.38.433.0 72.2.04 77.0 71. 82.8 7.20 14 1 1 17 to 24 pole on request 99.214.999.2 99.21.999.2 99.21.999.2 81.28 8.3 91.44 71. 7.20 81.28.04 71. 7.20 2.38.443.0 2.38.43.0 2.38.43.0 17 to 22 pole on request Accessories: Coding part (branch) Mounting bracket assembly - for double ended screw fixing of header 0.1.003.0 Z.23.243.0 0.1.003.0 299

wiecon PCB PCB headers pitch 7./7.2 mm cable size Rated current: A 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I Solder pin 1 x 1 mm Drill hole Ø 1.4 mm Solder pin 1 x 1 mm Drill hole Ø 1.4 mm Rated voltages VDE 01 UL Data CSA Data Approvals 14.20 21.70 29.20 3.70 44.20 1.70 9.20.70 74.20 81.70 89.20 7. 1.00 22. 30.00 37. 4.00 2. 0.00 7. 7.00 82. 2 3 4 7 8 9 11 closed version Type 8313 S/... G, 8413 S/... G Connection vertical to PCB üiqwd 2.370.323.0 2.370.333.0 2.370.343.0 2.370.33.0 2.370.33.0 2.370.373.0 2.370.383.0 2.370.393.0 2.370.403.0 2.370.413.0 2.370.423.0 300 V 1 A 300 V 1 A with screw flange Type 8313 S/... GF, 8413 S/... GF Connection vertical to PCB üiqwd Box Qty G T Pole Part No. GFL T Part No. Pitch 7. mm 2.4 33.04 40.4 48.04.4 3.04 70.4 78.04 8.4 93.04.4 7. 1.00 22. 30.00 37. 4.00 2. 0.00 7. 7.00 82. 2.374.23.0 2.374.33.0 2.374.43.0 2.374.3.0 2.374.3.0 2.374.73.0 2.374.83.0 2.374.93.0 2.374.703.0 2.374.713.0 2.374.723.0 300 V 1 A 300 V 1 A Pitch 7.2 mm 14.32 21.94 29. 7.2 1.24 22.8 2 3 4 2.390.323.0 2.390.333.0 2.390.343.0 2. 33.2 40.90 7.2 1.24 22.8 2.398.23.0 2.398.33.0 2.398.43.0 37.18 44.80 2.42 30.48 38. 4.72 7 2.390.33.0 2.390.33.0 2.390.373.0 48.2.14 3.7 30.48 38. 4.72 2.398.3.0 2.398.3.0 2.398.73.0 0.04 7. 7.28 3.34 0.4 8.8 8 9 2.390.383.0 2.390.393.0 2.390.403.0 71.38 79.00 8.2 3.34 0.4 8.8 2.398.83.0 2.398.93.0 2.398.703.0 82.90 90.2 7.20 83.82 11 2.390.413.0 2.390.423.0 94.24 1.8 7.20 83.82 2.398.713.0 2.398.723.0 Accessories: Coding part (branch) Mounting bracket assembly - for double ended screw fixing of header 300 0.1.003.0 Z.23.243.0 0.1.003.0

wiecon PCB headers pitch 7./7.2 mm cable size Rated current: A 400 V/ kv/3 overvoltage category III 90 V/ kv/2 overvoltage category II 0 V/ kv/1 overvoltage category I Solder pin 1 x 1 mm Drill hole Ø 1.4 mm Solder pin 1 x 1 mm Drill hole Ø 1.4 mm Rated voltages VDE 01 UL Data CSA Data Approvals Pitch 7. mm 14.40 21.90 29.40 3.90 44.40 1.90 9.40.90 74.40 81.90 89.40 7. 1.00 22. 30.00 37. 4.00 2. 0.00 7. 7.00 82. 2 3 4 7 8 9 11 closed version Type 8313 S/... W, 8413 S/... W Connection horizontal to PCB üiqwd 2.372.323.0 2.372.333.0 2.372.343.0 2.372.33.0 2.372.33.0 2.372.373.0 2.372.383.0 2.372.393.0 2.372.403.0 2.372.413.0 2.372.423.0 300 V 1 A 300 V 1 A with screw flange Type 8313 S/... WF, 8413 S/... WF Connection horizontal to PCB üiqwd Box Qty G T Pole Part No. GFL T Part No. 2.4 33.04 40.4 48.04.4 3.04 70.4 78.04 8.4 93.04.4 7. 1.00 22. 30.00 37. 4.00 2. 0.00 7. 7.00 82. 2.374.223.0 2.374.233.0 2.374.243.0 2.374.23.0 2.374.23.0 2.374.273.0 2.374.283.0 2.374.293.0 2.374.303.0 2.374.313.0 2.374.323.0 300 V 1 A 300 V 1 A Pitch 7.2 mm 14.2 22.14 29.7 7.2 1.24 22.8 2 3 4 2.392.323.0 2.392.333.0 2.392.343.0 2. 33.2 40.90 7.2 1.24 22.8 2.398.223.0 2.398.233.0 2.398.243.0 37.38 4.00 2.2 30.48 38. 4.72 7 2.392.33.0 2.392.33.0 2.392.373.0 48.2.14 3.7 30.48 38. 4.72 2.398.23.0 2.398.23.0 2.398.273.0 0.24 7.8 7.48 3.34 0.4 8.8 8 9 2.392.383.0 2.392.393.0 2.392.403.0 71.38 79.00 8.2 3.34 0.4 8.8 2.398.283.0 2.398.293.0 2.398.303.0 83. 90.72 7.20 83.82 11 2.392.413.0 2.392.423.0 94.24 1.8 7.20 83.82 2.398.313.0 2.398.323.0 Accessories: Coding part (branch) Mounting bracket assembly - for double ended screw fixing of header 0.1.003.0 Z.23.243.0 0.1.003.0 301

wiecon PCB PCB headers pitch.00/.08 mm cable size Rated current: A 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I Solder pin 1 x 1 mm Drill hole Ø 1.4 mm Solder pin 1 x 1 mm Drill hole Ø 1.4 mm Rated voltages VDE 01 UL Data CSA Data Approvals Pitch.00 mm 11.20 1.20 21.20 2.20 31.20 3.20 41.20 4.20 1.20.20 1.20.20 71.20 7.20 81.20 1 20 2 30 3 40 4 0 70 7 2 3 4 7 8 9 11 13 14 1 1 closed version Type 8113 S/... S, 8213 S/... S Connection at 4 to PCB üiqwd 2.394.323.0 2.394.333.0 2.394.343.0 2.394.33.0 2.394.33.0 2.394.373.0 2.394.383.0 2.394.393.0 2.394.403.0 2.394.413.0 2.394.423.0 2.394.433.0 2.394.443.0 2.394.43.0 2.394.43.0 300 V 1 A 300 V 1 A open version Type 8113 S/... S1, 8213 S/... S1 Connection at 4 to PCB üiqwd Box Qty G T Pole Part No. G T Part No. 17 to 24 pole on request 9.0 14.0 19.0 24.0 29.0 34.0 39.0 44.0 49.0 4.0 9.0 4.0 9.0 74.0 79.0 1 20 2 30 3 40 4 0 70 7 2.39.323.0 2.39.333.0 2.39.343.0 2.39.33.0 2.39.33.0 2.39.373.0 2.39.383.0 2.39.393.0 2.39.403.0 2.39.413.0 2.39.423.0 2.39.433.0 2.39.443.0 2.39.43.0 2.39.43.0 300 V 1 A 300 V 1 A Pitch.08 mm 11.3 1.44 21.2.08.1 1.24 2 3 4 2.39.323.0 2.39.333.0 2.39.343.0 9.7 14.84 19.92.08.1 1.24 2.397.323.0 2.397.333.0 2.397.343.0 2.0 31.8 3.7 20.32 2.40 30.48 7 2.39.33.0 2.39.33.0 2.39.373.0 2.00 30.08 3.1 20.32 2.40 30.48 2.397.33.0 2.397.33.0 2.397.373.0 41.84 4.92 2.00 3. 40.4 4.72 8 9 2.39.383.0 2.39.393.0 2.39.403.0 40.24 4.32.40 3. 40.4 4.72 2.397.383.0 2.397.393.0 2.397.403.0 7.08 2.19 7.24.80.88 0.9 11 13 2.39.413.0 2.39.423.0 2.39.433.0.48 0..4.80.88 0.9 2.397.413.0 2.397.423.0 2.397.433.0 72.32 77.40 82.48.04 71. 7.20 14 1 1 2.39.443.0 2.39.43.0 2.39.43.0 70.72 7.80 80.88.04 71. 7.20 2.397.443.0 2.397.43.0 2.397.43.0 17 to 24 pole on request Accessories: Coding part (branch) 0.1.003.0 0.1.003.0 302

wiecon PCB headers pitch.00/.08 mm Rated current: A 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I Solder pin 1 x 1 mm Drill hole Ø 1.4 mm Solder pin 1 x 1 mm Drill hole Ø 1.4 mm Rated voltages VDE 01 UL Data CSA Data Approvals Pitch.00 mm 2 x 2 2 x 3 Type 8113 SE/... G, 8213 SE/... G Connection vertical to PCB iqwd 2.334.323.0 2.334.333.0 300 V 1 A 300 V A Type 8113 SE/... W, 8213 SE/... W Connection horizontal to PCB iqwd Box Qty T Pole Part No. Part No. 2.33.323.0 2.33.333.0 300 V 1 A 300 V A Larger pole numbers can be achieved by latching together Pitch.08 mm.08.1 2 x 2 2 x 3 2.34.323.0 2.34.333.0 2.3.323.0 2.3.333.0 Larger pole numbers can be achieved by latching together Accessories: End plate Mounting bracket assembly - for double ended screw fixing of header 07.3.983.0 07.3.983.0 on request Only in connection with end plate 07.3.983.0 Z.23.243.0 303

wiecon PCB PCB Headers pitch.00/.08 mm G 28, G Rated current: A T 22 22 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category III 400 V/4 kv/2 overvoltage category II,00,08 T 20,00 20,32 3,2 8213 SEG,00,08 >PBT<,00,1 28, 3,2 Solder pin 1 x 1 mm Drill hole Ø 1.3 mm Solder pin 1 x 1 mm Drill hole Ø 1.3 mm Rated voltages VDE 01 UL Data CSA Data Approvals Pitch.00 mm Pitch.08 mm 17 22 27 32 37 42 47 2 7 2 7 72 77 82.1 17.24 22.32 27.40 32.48 37. 42.4 47.72 2.80 7.88 2.9 8.04 73. 78.20 83.28 1 20 2 30 3 40 4 0 70 7.08.1 1.24 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 4 8 14 1 18 20 22 24 2 28 30 32 1 to 24 pole on request 4 8 14 1 18 20 22 24 2 28 30 32 Type 81-8213 SEG.../G qw 27.334.023.0 27.334.033.0 27.334.043.0 27.334.03.0 27.334.03.0 27.334.073.0 27.334.083.0 27.334.093.0 27.334.3.0 27.334.113.0 27.334.3.0 27.334.133.0 27.334.143.0 27.334.13.0 27.334.13.0 27.34.023.0 27.34.033.0 27.34.043.0 27.34.03.0 27.34.03.0 27.34.073.0 27.34.083.0 27.34.093.0 27.34.3.0 27.34.113.0 27.34.3.0 27.34.133.0 27.34.143.0 27.34.13.0 27.34.13.0 300 V A 300 V A qw Box Qty G T Pole Part No. Part No. 1 to 24 pole on request Type 81-8213 SEG.../W 27.33.023.0 27.33.033.0 27.33.043.0 27.33.03.0 27.33.03.0 27.33.073.0 27.33.083.0 27.33.093.0 27.33.3.0 27.33.113.0 27.33.3.0 27.33.133.0 27.33.143.0 27.33.13.0 27.33.13.0 27.3.023.0 27.3.033.0 27.3.043.0 27.3.03.0 27.3.03.0 27.3.073.0 27.3.083.0 27.3.093.0 27.3.3.0 27.3.113.0 27.3.3.0 27.3.133.0 27.3.143.0 27.3.13.0 27.3.13.0 300 V A 300 V A 304 Coding available on request Coding available on request

wiecon Headers for panel mounting, pitch.08 mm cable kodierbar size Wire wrap connection 1 x 1 Max. diameter of interconnecting wire Ø: 0.8 mm Rated current:. A Solder connection Rated cross section 1. mm 2 single core/ 1.0 mm 2 finely stranded Rated current: A Plug connection 2.8 x 0.8 DIN 4249 Rated cross section 1.0 mm 2 finely stranded Rated current: 8 A 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I Rated voltages VDE 01 UL Data CSA Data Approvals Pitch.08 mm 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 81.28 8.3 91.44 9.2 1.0.08.1 1.24 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 2 3 4 7 8 9 11 13 14 1 1 17 to 22 pole on request Wire-Wrap Type 8213 S/... DFWW, 8213 S/... DFWW M No. 22 AWG 300 V. A No. 22 AWG 300 V. A iqwd 2.303.023.0 2.303.033.0 2.303.043.0 2.303.03.0 2.303.03.0 2.303.073.0 2.303.083.0 2.303.093.0 2.303.3.0 2.303.113.0 2.303.3.0 2.303.133.0 2.303.143.0 2.303.13.0 2.303.13.0 2.313.023.0 2.313.033.0 2.313.043.0 2.313.03.0 2.313.03.0 2.313.073.0 2.313.083.0 2.313.093.0 2.313.3.0 2.313.113.0 2.313.3.0 2.313.133.0 2.313.143.0 2.313.13.0 2.313.13.0 with press in nut for screw flange Type 8213 S/... DFLS, 8213 S/... DFLS M No. 22 AWG 300 V /8 A No. 22 AWG 300 V /8 A iqwd Box Qty G T Pole Part No. Part No. Part No. Part No. without press in nut with solder connection 2.303.323.0 2.303.333.0 2.303.343.0 2.303.33.0 2.303.33.0 2.303.373.0 2.303.383.0 2.303.393.0 2.303.403.0 2.303.413.0 2.303.423.0 2.303.433.0 2.303.443.0 2.303.43.0 2.303.43.0 without press in nut 2.313.323.0 2.313.333.0 2.313.343.0 2.313.33.0 2.313.33.0 2.313.373.0 2.313.383.0 2.313.393.0 2.313.403.0 2.313.413.0 2.313.423.0 2.313.433.0 2.313.443.0 2.313.43.0 2.313.43.0 with press in nut for screw flange Dimensions for panel cut out a 13.18 18.2 23.34 28.42 33. 38.8 43. 48.74 3.82 8.90 8.98 9.0 74.14 79.22 84.30 Accessories: b 20.32 2.40 30.48 3. 40.4 4.72.80.08 0.9.04 71. 7.20 81.28 8.3 91.44 2 3 4 7 8 9 11 13 14 1 1 1 to 24 pole on request Coding part (branch) 0.1.003.0 0.1.003.0 Screw assembly Z.0.08.0 Z.0.08.0 30

wiecon PCB Accessories for 8113 8413/8813 and 8213 BL Drilling plan for mounting bracket Z.23.243.0 Type 8113 SE/... and 8213 SE/... A B 8113.3.00 8213.8.08 Drilling plan for mounting bracket Z.23.243.0 Type 81 8413 S/... A B 8113.1.00 8213.2.08 8313.4 7. 8413.4 7.2 8113 8413/8813 8213 BL Mounting bracket (Type 8113 8413) Part No. Box Qty Part No. Box Qty Z.23.243.0 Adhesive marking strips for socket connectors and headers with /.08 mm pitch End plate for two tier header (Type 8113 8213 SE) 07.3.983.0 Coding branch for header (Type 8113 8413, Type 8813) socket connector (Type 8113 8413) 0.1.003.0 a 0.1.913.0 1 04.007.4089.0 1 13 24 04.007.4189.0 1 2 3 04.007.4289.0 1 37 8 04.007.4389.0 1 49 0 04.007.4489.0 1 1 72 04.007.489.0 1 73 84 04.007.489.0 1 8 9 04.007.4789.0 1 97 8 04.007.4889.0 1 Mounting bracket Mounting bracket assembly for headers Mounting bracket assembly with end plate for two tier headers Z.23.773.0 Z.23.783.0 30

wiecon 307

wiecon PCB Duo modular terminals, spring clamp with headers for pluggable PCB terminals For PCB terminals 8113 BFK EN 0 947-7-1/DIN VDE 011 T1 UL Data field/factory wiring CSA Data Width stripping length Approvals Duo modular terminal Colour: grey Colour: blue Duo earth terminal Colour: yellow/green Double deck terminal Colour: grey WKF 2. D2/8113/3 finely stranded single core V A 0.13 2. mm 2 0.13 4 mm 2 2 V/4 kv/3 1 No. 22 AWG 300 1 No. 24 AWG 300 1 mm 11 mm qw finely stranded single core V A 0.13 2. mm 2 0.13 4 mm 2 2 V/4 kv/3 1 No. 22 AWG 300 No. 24 AWG 300 mm 11 mm qw Type Part No. Box Qty Type Part No. Box Qty WKF 2, D2/8113/3.703.203.0 WKF 2, D2/8113/3 BLAU.703.203. WKF 2. D2/8113 SL/3 WKF 2, D2/8113 SL/3.703.923.0 Accessories 1. Mounting rail 3, DIN rail 7. high L = 2 m Mounting rail 3, DIN rail 1 high L = 2 m 2. End clamp TS 3, with screw 8 mm wide End clamp TS 3, screwless 8 mm wide 3. End plate Colour: grey Colour: blue 4. Partition plate Colour: grey Colour: blue. Jumper bar 2 pole insulated 3 pole 4 pole pole pole 7 pole 8 pole 9 pole pole. Conductor entry strip 0.13 0.2 mm 2 0.2 0. mm 2 0.7 1.0 mm 2 7. Cover with warning symbol for 4 terminals Pin cover with warning symbol for 4 pole 8. Screwdriver, uninsulated 9. Coding part (branch) 3x27x7, EN 071 98.300.0000.0 1 3x27x7, EN 071 98.300.0000.0 1 3x24x1 EN 071 98.30.0000.0 1 3x24x1 EN 071 98.30.0000.0 1 9708/2 S3 Z.22.83.0 9708/2 S3 Z.22.83.0 WEF 1/3 Z.23.933.0 WEF 1/3 Z.23.933.0 APF 2,/D2/8113 07.3.413.0 APF 2,/D2/8113 07.3.413.0 APF 2,/D2/8113 07.3.413. IVB WKF 2, 2 Z7.280.227.0 IVB WKF 2, 3 Z7.280.327.0 IVB WKF 2, 4 Z7.280.427.0 IVB WKF 2, Z7.280.27.0 IVB WKF 2, Z7.280.27.0 IVB WKF 2, 7 Z7.280.727.0 20 IVB WKF 2, 8 Z7.280.827.0 20 IVB WKF 2, 9 Z7.280.927.0 20 IVB WKF 2, Z7.280.7027.0 20 LEL 2,/1 WEISS 0.1.3.0 LEL 2,/1 WEISS 0.1.3.0 LEL 2,/2 GRAU 0.1.3.0 LEL 2,/2 GRAU 0.1.3.0 LEL 2,/3 SCHWARZ 0.1.73.0 LEL 2,/3 SCHWARZ 0.1.73.0 ADF 2,/4 GELB 04.343.03.8 ADF 2,/4 GELB 04.343.03.8 AD 8113/4 GELB 04.343.83.8 AD 8113/4 GELB 04.343.83.8 DIN 24 B 0,x3, 0.2.4000.0 DIN 24 B 0,x3, 0.2.4000.0 0.1.003.0 0.1.003.0. Labelling systems See page 3 of fasis See page 3 of fasis 308 Please see note on page 3 on fasis!

wiecon PCB terminal pluggable spring clamp system pitch.00 mm Rated current: A 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I when using ferrules for wire range 2. mm 2, use only ferrules with part number 0.9.7.0 See pages 79 to 797 facts & DATA 11 WKF 1. E/8113/3 finely stranded single core V A 0.13 1. mm 2 0.13 2. mm 2 2 V/4 kv/3 1 No. 22 14 No. 24 14 mm 11 mm Type Part No. Box Qty WKF 1, E/8113/3.702.203.0 3x27x7, EN 071 98.300.0000.0 1 3x24x1 EN 071 98.30.0000.0 1 9708/2 S3 Z.22.83.0 WEF 1/3 Z.23.933.0 APF 1,/E/8113 07.3.473.0 IVB WKF 2, 2 Z7.280.227.0 IVB WKF 2, 3 Z7.280.327.0 IVB WKF 2, 4 Z7.280.427.0 IVB WKF 2, Z7.280.27.0 IVB WKF 2, Z7.280.27.0 IVB WKF 2, 7 Z7.280.727.0 20 IVB WKF 2, 8 Z7.280.827.0 20 IVB WKF 2, 9 Z7.280.927.0 20 IVB WKF 2, Z7.280.7027.0 20 LEL 1,/1 WEISS 0.2.243.0 LEL 1,/2 GRAU 0.2.23.0 LEL 1,/3 SCHWARZ 0.2.23.0 ADF 2,/4 GELB 04.343.03.8 AD 8113/4 GELB 04.343.83.8 DIN 24 B 0,x3, 0.2.4000.0 0.1.003.0 See page 37 of fasis Rated voltages VDE 01 EN 0 947-7-1/DIN VDE 011 T1 Pitch stripping length UL Data CSA Data Approvals in preparation Pitch.00 mm Accessories: Coding branch (branch) Screwdriver DIN 24 B 0. x 3. 1 20 2 30 3 40 4 0 70 7 80 1 20 2 30 3 40 4 0 70 7 2 3 4 7 8 9 11 13 14 1 1 1 to 24 pole on request Type 8113 BFK 0.13 2. mm 2 finely stranded 0.13 4 mm 2 single core 11 mm 9 mm No. 22 AWG 300 V A No. 22 AWG 300 V A Box Qty G T Pole Part No. Part No. q 2.820.323.0 2.820.333.0 2.820.343.0 2.820.33.0 2.820.33.0 2.820.373.0 2.820.383.0 2.820.393.0 2.820.403.0 2.820.413.0 2.820.423.0 2.820.433.0 2.820.443.0 2.820.43.0 2.820.43.0 0.1.913.0 0.2.4000.0 2.820.023.0 2.820.033.0 2.820.043.0 2.820.03.0 2.820.03.0 2.820.073.0 2.820.083.0 2.820.093.0 2.820.3.0 2.820.113.0 2.820.3.0 2.820.133.0 2.820.143.0 2.820.13.0 2.820.13.0 309

wiecon PCB Modular terminals, rising cage clamp with headers for pluggable PCB terminals for PCB terminals: Type 8113 B Type 8113 BFK Type 8313 B Type 8113 B/VL Type 8113 B/VR Type 8113 B/Top Indicator: R = 4.7 K; 0. W LED colour: red 1) determined by LED at terminal The items with ***) have insulating housing in accordance with UL 94-V0 (flammability class) EN 0 947-7-1/DIN VDE 011 T1 UL Data CSA Data Width Approvals Modular terminal Modular terminal with LED 2 V Modular terminal with LED V Supply terminal Modular terminal with header PCB terminals type 8113 see page 297 stripping length Colour: grey Colour: grey Colour: grey Colour: blue WK 2. U / 8113 S/V finely stranded single core V A 0. 2. mm 2 0. 4 mm 2 2 V/4 kv/3 No. 22 AWG 300 V 1 No. 24 AWG 300 V 1 mm 9 mm qw WK 2. U / 8113 S/V / LED 2 finely stranded single core V A 0. 2. mm 2 0. 4 mm 2 1) No. 22 AWG 300 V 1 No. 24 AWG 2 V 1 mm 9 mm qw Type Part No. Box Qty Type Part No. Box Qty WK 2, U/8113 S/V...*** ) 7.3.2. WK 2, U/8113 S/V/LED 2*** ) 7.3.27.0 Accessories Mounting rail 3 DIN rail 7. mm high Mounting rail 3 DIN rail 1 mm high Mounting rail 32 G-rail End clamp with U-foot End clamp TS 3 with screw End clamp TS 32 with screw End plate right 2. mm thick End plate links 2. mm thick End plate 2. mm thick Right intermediate plate 2. mm thick Intermediate plate 2. mm thick L = 2 m L = 2 m L = 2 m mm wide 8 mm wide 7. mm wide Colour: grey Colour: grey Colour: blue Colour: grey Colour: blue AP 2, U/8113 S/V *** ) AP 2, U/8113 *** ) ZP 2, U/8113 S/V 07.3.1.0 07.3.4.0 07.3.1.0 AP 2, U/8113 S/V *** ) AP 2, U/8113 *** ) ZP 2, U/8113 S/V 07.3.1.0 07.3.4.0 07.3.1.0 (for use of PCB terminals with 7. mm) Jumper bar with screws, E-Cu Connecting rail, tin plated insulated 2 pole 3 pole up to pole L = 0.4 m IVB WK 2,-2 IVB WK 2,-3 IVB WK 2,- Z7.280.2227.0 Z7.280.2327.0 Z7.280.3227.0 0.1.4.0 1 IVB WK 2,-2 IVB WK 2,-3 IVB WK 2,- Z7.280.2227.0 Z7.280.2327.0 Z7.280.3227.0 0.1.4.0 1 Single cover for jumper bar with marking facility Cover strip for header 24 pole Cover strip for header with warning symbol Insulating plate Coding part (branch) Sealing end pole See page 394 for labelling systems ADVB 2, GELB TS 2, GELB 04.32.203.0 04.343.90.0 04.343.91.0 07.311.203.0 0.1.003.0 ADVB 2, GELB TS 2, GELB 04.32.203.0 04.343.90.0 04.343.91.0 07.311.203.0 0.1.003.0 3

wiecon Indicator: R = K; 0. W LED colour: red 1) determined by LED at terminal WK 2. U / 8113 S/V / LED finely stranded single core V A 0. 2. mm 2 0. 4 mm 2 1) No. 22 AWG 300 V 1 No. 24 AWG V 1 mm 9 mm qw WK 2. U / 8113 S/V /VK finely stranded single core V A 0. 2. mm 2 0. 4 mm 2 2 V/4 kv/3 No. 22 AWG 300 V 1 No. 24 AWG 300 V 1 mm 9 mm qw WK 2. U / 8113 S/H finely stranded single core V A 0. 2. mm 2 0. 4 mm 2 2 V/4 kv/3 No. 22 AWG 300 V 20 No. 24 AWG 300 V 1 mm 9 mm Type Part No. Box Qty Type Part No. Box Qty Type Part No. Box Qty qw WK 2, U/8113 S/V/LED *** ) 7.3.28.0 WK 2, U/8113 S/V/VK*** ) 7.3.30. WK 2, U/8113 S/H*** ) 7.3.20.0 AP 2, U/8113 S/V *** ) AP 2, U/8113 *** ) ZP 2, U/8113 S/V 07.3.1.0 07.3.4.0 07.3.1.0 AP 2, U/8113 *** ) AP 2, U/8113 S/V BL*** ) ZP 2, U/8113 S/V ZP 2, U/8113 S/V BL 07.3.4.0 07.3.1.0 07.3.1.0 07.3.1. AP 2, U/8113 S/H *** ) 07.311.98.0 IVB WK 2,-2 IVB WK 2,-3 IVB WK 2,- Z7.280.2227.0 Z7.280.2327.0 Z7.280.3227.0 0.1.4.0 1 IVB WK 2,-2 IVB WK 2,-3 IVB WK 2,- Z7.280.2227.0 Z7.280.2327.0 Z7.280.3227.0 0.1.4.0 1 IVB WK 2,-2 IVB WK 2,-3 IVB WK 2,- Z7.280.2227.0 Z7.280.2327.0 Z7.280.3227.0 0.1.4.0 1 ADVB 2, GELB TS 2, GELB 04.32.203.0 04.343.90.0 04.343.91.0 07.311.203.0 0.1.003.0 ADVB 2, GELB TS 2, GELB 04.32.203.0 04.343.90.0 04.343.91.0 07.311.203.0 0.1.003.0 ADVB 2, GELB TS 2, GELB 04.32.203.0 04.343.90.0 04.343.91.0 07.311.203.0 0.84.003.0 0.7.83.0 2 311

wiecon PCB Modular terminals, rising cage clamp with header for pluggable PCB terminals for PCB terminals: Type 8113 B Type 8113 BFK Type 8313 B Type 8113 B/VL Type 8113 B/VR Type 8113 B/Top Indicator: R = 4.7 K; 0. W LED colour: red 1) determined by LED in terminal The items with ***) have insulating housing in accordance with UL 94-V0 (flammability class) EN 0 947-7-1/DIN VDE 011 T1 UL Data CSA Data Width Approvals Modular terminal Modular terminal with LED 2 V Modular terminal with LED V Supply terminal Modular terminal with header PCB terminals type 8113 see page 297 stripping length Colour: grey Colour: grey Colour: grey Colour: blue WK 2. U /D/ 8113 S/V finely stranded single core V A 0. 2. mm 2 0. 4 mm 2 2 V/4 kv/3 No. 22 AWG 300 V 1 No. 24 AWG 300 V 1 mm 9 mm qw WK 2. U /D/ 8113 S/V / LED 2 finely stranded single core V A 0. 2. mm 2 0. 4 mm 2 1) No. 22 AWG 300 V 1 No. 24 AWG 2 V 1 mm 9 mm qw Type Part No. Box Qty Type Part No. Box Qty WK 2, U/D/8113 S/V...*** ) 7.3.21.0 WK 2, U/D/8113 S/V/LED 2*** ) 7.3.22.0 Accessories Mounting rail 3 DIN rail 7. mm high Mounting rail 3 DIN rail 1 mm high Mounting rail 32 G-rail End clamp with U-foot End clamp TS 3 with screw End clamp TS 32 with screw End plate 2. mm thick End plate 2. mm thick Intermediate plate 2. mm thick Intermediate plate 2. mm thick L = 2 m L = 2 m L = 2 m mm wide 8 mm wide 7. mm wide Colour: grey Colour: blue Colour: grey Colour: blue AP 2, U/D/8113 S/V *** ) ZP 2, U/D/8113 S/V 07.311.90.0 07.311.91.0 AP 2, U/D/8113 S/V*** ) ZP 2, U/D/8113 S/V 07.311.90.0 07.311.91.0 (for use of PCB terminals with 7. mm) Jumper bar with screws, E-Cu insulated 2 pole 3 pole up to pole Connecting rail, tin plated L = 0.4 m Cover strips for LED (transparent) Single cover for jumper bar with marking facility Cover strip for header 24 pole Cover strip for header with warning symbol 24 pole Insulating plate Coding part (branch) IVB WK 2,-2 IVB WK 2,-3 IVB WK 2,- ADVB / P ADVB 2, GELB TS 2, GELB Z7.280.2227.0 Z7.280.2327.0 Z7.280.3227.0 0.1.4.0 1 04.342.3.8 04.32.203.8 04.343.90.8 04.343.91.8 07.311.203.8 0.1.003.0 IVB WK 2,-2 IVB WK 2,-3 IVB WK 2,- ADVB / P ADVB 2, GELB TS 2, GELB Z7.280.2227.0 Z7.280.2327.0 Z7.280.3227.0 0.1.4.0 1 04.342.3.8 04.32.203.8 04.343.90.8 04.343.91.8 07.311.203.8 0.1.003.0 See page 394 for labelling systems 3

wiecon Indicator: R = K; 0. W LED colour: red 1) determined by LED int terminal WK 2. U /D/ 8113 S/V / LED finely stranded single core V A 0. 2. mm 2 0. 4 mm 2 1) No. 22 AWG 300 V 1 No. 24 AWG V 1 mm 9 mm qw WK 2. U /D/ 8113 S/V /VK finely stranded single core V A 0. 2. mm 2 0. 4 mm 2 2 V/4 kv/3 No. 22 AWG 300 V 1 No. 24 AWG 300 V 1 mm 9 mm qw Type Part No. Box Qty Type Part No. Box Qty WK 2, U/D/8113 S/V/LED *** ) 7.3.23.0 WK 2, U/D/8113 S/V/VK*** ) 7.3.2. AP 2, U/D/8113 S/V *** ) ZP 2, U/D/8113 S/V 07.311.90.0 07.311.91.0 AP 2, U/D/8113 S/V BL*** ) ZP 2, U/D/8113 S/V BL 07.311.90. 07.311.91. IVB WK 2,-2 IVB WK 2,-3 IVB WK 2,- ADVB / P ADVB 2, GELB TS 2, GELB Z7.280.2227.0 Z7.280.2327.0 Z7.280.3227.0 0.1.4.0 1 04.342.3.8 04.32.203.8 04.343.90.8 04.343.91.8 07.311.203.8 0.1.003.0 IVB WK 2,-2 IVB WK 2,-3 IVB WK 2,- ADVB / P ADVB 2, GELB TS 2, GELB Z7.280.2227.0 Z7.280.2327.0 Z7.280.3227.0 0.1.4.0 1 04.342.3.8 04.32.203.8 04.343.90.8 04.343.91.8 07.311.203.8 0.1.003.0 313

Two part PCB terminals wiecon PCB with pin strip headers Indirect connection describes the method used to connect an external conductor to a PCB via a pin header and terminal connector System features screw connection is easy to operate plug in system easy to service easily detachable connection number of poles 2 24 clear straight forward interconnection horizontal and vertical configurations that can be individually matched to the relevant application terminal clamping part with wire protection Type range pitch (3./7//) mm 2 24 pole pin strips with straight or angled solder pins pin diameters 0.8 mm, 1 mm and 1.3 mm Materials Insulating housing: high quality polyamide used because of its excellent electrical, mechanical and chemical properties (see facts & DATA section) Metal components: made from special alloys and/or special surface treatments clamp: nickel plated brass clamping screw: galvanised and chromated steel header contact for type 8142 and ST 29: tinned bronze header contact for type 843: tinned brass wire protection: tinned bronze minimum contact resistance with high corrosion protection secure, dynamic clamping function Pin headers: Insulating parts: made of high quality Polyamide / Metal components: contact pin, Ms tinned glass filled for additional reinforcement Note: The conductor size and connecting voltage current capacity relate to unprepared conductors without ferrules. The rated current specified corresponds to the maximum load of PCB terminal and the size of the connected conductor. Marking by means of inkjet printer directly onto the terminal using indelible ink clear pole marking which is easy to read special marking is possible on request economical marking directly into the terminal Abbreviations for plastic marking material: PA / = Polyamide / PC = Polycarbonate PBT = Polybutylenterephthalate The rated voltage is specified in accordance with DIN VDE 01 Part 1 (IEC 0 4-1) Insulation regulations for electrical equipment in low voltage installations and refers to the received condition of the PCB terminals. When fitting PCB terminals to the PCB, the appropriate terminal should be selected with consideration given to the relevant electrical and physical properties suitable to the application. Also, attention should be paid to circuit board tracking, creepage and clearances as well as distances between individual conductor and solder pads. In addition, the various forms of environmental pollutants and their degree of influence can effect the performance of a piece of equipment. A system approach is therefore required to ensure that the electrical and other parameters of the PCB terminal match that governed by the functionality of the printed circuit board design. 314

wiecon Page 31 Page 318 Page 320 Type 843 8142 ST 29 Pitch mm 3./7.00.00/.00.08 Cross section mm 2 1 2. 1. Pole 2 24 2 24 31

wiecon PCB Two part PCB terminal, pitch 3./7.00 mm Rated cross section 1.0 mm 2 Rated current: A Wire range: 0.14 1. mm 2 single core/ 0.14 1.0 mm 2 finely stranded Pitch 3. mm Pitch 3. mm 10 V/2. kv/3 overvoltage category III 2 V/2. kv/2 overvoltage category II *90 V/2. kv/1 overvoltage category I * max. 00 V for non earthed systems or expected overvoltage 3kV for L 2.0 mm and 2. kv for 2.0 mm > L 1. mm Rated voltages VDE 01 (Pitch 3. mm) UL Data CSA Data Approvals Pitch 3. mm 7.0. 14.0 17. 21.0 24. 28.0 31. 3.0 38. 42.0 4. 49.0 2..0 3. 7.0. 14.0 17. 21.0 24. 28.0 31. 3.0 38. 42.0 4. 49.0 2. 2 3 4 7 8 9 11 13 14 1 1 1 to 24 pole on request Type 843 Connection at 90 to conductor No. 22 1 AWG 300 V A No. 22 1 AWG 300 V A iqw 2.02.23.0 2.02.33.0 2.02.43.0 2.02.3.0 2.02.3.0 2.02.73.0 2.02.83.0 2.02.93.0 2.02.03.0 2.02.13.0 2.02.23.0 2.02.33.0 2.02.43.0 2.02.3.0 2.02.3.0 M 2 2.00.23.0 2.00.33.0 2.00.43.0 2.00.3.0 2.00.3.0 2.00.73.0 2.00.83.0 2.00.93.0 2.00.03.0 2.00.13.0 2.00.23.0 2.00.33.0 2.00.43.0 2.00.3.0 2.00.3.0 PCB header Connection vertical to PCB iqw Box Qty G T Pole Part No. Part No. Part No. Part No. Colour: grey Z.31.022.0 Z.31.032.0 Z.31.042.0 Z.31.02.0 Z.31.02.0 Z.31.072.0 Z.31.082.0 Z.31.092.0 Z.31.2.0 Z.31.1.0 Z.31.2.0 Z.31.132.0 Z.31.142.0 Z.31..0 Z.31..0 Colour: grey Colour: black Solder pin Ø 0.8 mm Solder pin Ø 1.0 mm Drill hole. Ø 1.0 mm Drill hole. Ø 1.3 mm Colour: black Z.31.322.0 Z.31.332.0 Z.31.342.0 Z.31.32.0 Z.31.32.0 Z.31.372.0 Z.31.382.0 Z.31.392.0 Z.31.402.0 Z.31.4.0 Z.31.422.0 Z.31.432.0 Z.31.442.0 Z.31.42.0 Z.31.42.0 Pitch 7.00 mm Rated voltages (Pitch 7 mm): VDE 01 on request 400 V/ kv/3 overvoltage category III 90 V/ kv/2 overvoltage category II 0 V/ kv/1 overvoltage category I Materials PCB terminals Insulating component: PC grey, UL 94-V0 Clamping parts and contact spring: tin plated brass Clamping screw: galvanised steel Wire protection: tin plated bronze Header Insulating component: reinforced PA / grey or black UL 94-V0 Contact pin: tin plated brass 31

wiecon Pitch 3. mm Colour: black Solder pin Ø 0.8 mm Drill hole. Ø 1.0 mm Colour: black Solder pin Ø 1.0 mm Drill hole. Ø 1.3 mm PCB header Connection horizontal to PCB iqw Part No. Colour: black Z.32.022.0 Z.32.032.0 Z.32.042.0 Z.32.02.0 Z.32.02.0 Z.32.072.0 Z.32.082.0 Z.32.092.0 Z.32.2.0 Z.32.1.0 Z.32.2.0 Z.32.132.0 Z.32.142.0 Z.32..0 Z.32..0 Part No. Colour: black Z.32.322.0 Z.32.332.0 Z.32.342.0 Z.32.32.0 Z.32.32.0 Z.32.372.0 Z.32.382.0 Z.32.392.0 Z.32.402.0 Z.32.4.0 Z.32.422.0 Z.32.432.0 Z.32.442.0 Z.32.42.0 Z.32.42.0 317

wiecon PCB Two part PCB terminal, pitch.00/.00 mm Rated cross section 2. mm 2 Rated current: 8 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded 200 V/4 kv/3 overvoltage category III 2 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I Pitch.00 mm Pitch.00 mm Pitch.00 mm Pitch.00 mm Rated voltages VDE 01 (Pitch mm) UL Data CSA Data Approvals Pitch.00 mm Pitch.00 mm 1 20 2 30 3 40 4 0 70 7 80 20 30 40 0 70 80 1 20 2 30 3 40 4 0 70 7 20 30 40 0 70 2 3 4 7 8 9 11 13 14 1 1 1 to 24 pole on request 2 3 4 7 8 9 to pole on request Type 8142 Connection at 90 to conductor No. 22 AWG 300 V 1 A No. 22 AWG 300 V 1 A üiqwd 2.02.223.0 2.02.233.0 2.02.243.0 2.02.23.0 2.02.23.0 2.02.273.0 2.02.283.0 2.02.293.0 2.02.303.0 2.02.313.0 2.02.323.0 2.02.333.0 2.02.343.0 2.02.33.0 2.02.33.0 2.03.3.0 2.03.133.0 2.03.143.0 2.03.13.0 2.03.13.0 2.03.173.0 2.03.183.0 M 2. 2.00.223.0 2.00.233.0 2.00.243.0 2.00.23.0 2.00.23.0 2.00.273.0 2.00.283.0 2.00.293.0 2.00.303.0 2.00.313.0 2.00.323.0 2.00.333.0 2.00.343.0 2.00.33.0 2.00.33.0 2.01.3.0 2.01.133.0 2.01.143.0 2.01.13.0 2.01.13.0 2.01.173.0 2.01.183.0 PCB header Connection vertical to PCB üiqwd Box Qty G T Pole Part No. Part No. Part No. Part No. Colour: grey Colour: black Z.30.022.0 Z.30.032.0 Z.30.042.0 Z.30.02.0 Z.30.02.0 Z.30.072.0 Z.30.082.0 Z.30.092.0 Z.30.2.0 Z.30.1.0 Z.30.2.0 Z.30.132.0 Z.30.142.0 Z.30..0 Z.30..0 Z.30.22.0 Z.30.32.0 Z.30.42.0 Z.30.2.0 Z.30.2.0 Z.30.72.0 Z.30.82.0 Colour: grey Colour: black Solder pin Ø 1.0 mm Solder pin Ø 1.3 mm Drill hole. Ø 1.3 mm Drill hole. Ø 1. mm Z.30.322.0 Z.30.332.0 Z.30.342.0 Z.30.32.0 Z.30.32.0 Z.30.372.0 Z.30.382.0 Z.30.392.0 Z.30.402.0 Z.30.4.0 Z.30.422.0 Z.30.432.0 Z.30.442.0 Z.30.42.0 Z.30.42.0 Z.30.822.0 Z.30.832.0 Z.30.842.0 Z.30.82.0 Z.30.82.0 Z.30.872.0 Z.30.882.0 Rated voltages (Pitch.00 mm): VDE 01 0 V/8 kv/3 overvoltage category III 800 V/8 kv/2 overvoltage category II 0 V/8 kv/1 overvoltage category I Materials PCB terminals Insulating component: PC grey, UL 94-V0 Clamping parts: nickel plated brass Clamping screw: galvanised steel Contact spring: tin plated bronze Header Insulating component: reinforced PA / grey or black, UL 94-V0 Contact pin: tin plated brass 318

wiecon Accessories Pitch.00 mm vertical mounting position horizontal mounting position Pitch.00 mm Colour: black Solder pin Ø 1.0 mm Drill hole. Ø 1.3 mm PCB header Connection horizontal to PCB Colour: black Solder pin Ø 1.3 mm Drill hole. Ø 1. mm drilling plan for mounting bracket in vertical mounting position drilling plan for mounting bracket in horizontal mounting position üiqwd Part No. Part No. Part No. Box Qty Part No. Box Qty Colour: black Z.40.022.0 Z.40.032.0 Z.40.042.0 Z.40.02.0 Z.40.02.0 Z.40.072.0 Z.40.082.0 Z.40.092.0 Z.40.2.0 Z.40.1.0 Z.40.2.0 Z.40.132.0 Z.40.142.0 Z.40..0 Z.40..0 Colour: black Z.40.322.0 Z.40.332.0 Z.40.342.0 Z.40.32.0 Z.40.32.0 Z.40.372.0 Z.40.382.0 Z.40.392.0 Z.40.402.0 Z.40.4.0 Z.40.422.0 Z.40.432.0 Z.40.442.0 Z.40.42.0 Z.40.42.0 Mounting bracket Insulating component PA / grey, M 3 screw, galvanised steel Z.23.73.0 Coding branch Colour white 0.1.943.0 2 Colour orange 0.1.943. 2 Z.23.73.0 Coding branch Colour white 0.1.943.0 2 Colour orange 0.1.943. 2 Z.40.22.0 Z.40.32.0 Z.40.42.0 Z.40.2.0 Z.40.2.0 Z.40.72.0 Z.40.82.0 Z.40.822.0 Z.40.832.0 Z.40.842.0 Z.40.82.0 Z.40.82.0 Z.40.872.0 Z.40.882.0 319

wiecon PCB Two part PCB terminal. pitch.08 mm cable size 1. mm 2 Rated cross section 1. mm 2 Rated current: A Wire range: 0.14 2. mm 2 single core/ 0.14 1. mm 2 finely stranded 200 V/4 kv/3 overvoltage category III 2 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I Statement of Conformity/CH M 3 7 Solder pin Ø 1.3 mm Drill hole Ø 1. mm Rated voltages VDE 01 EN 0 998-1, EN 0 998-2-1 UL Data CSA Data Approvals Pitch.08 mm Top connector, pole Type ST 29/ BC Connection at 90 to conductor 1. mm 2 2 V A No. 22 14 AWG 300 V A No. 22 14 AWG 300 V A iqw PCB header Connection vertical to PCB (if all terminals carry current) iqw Pole Type Part No. Box Qty Type Part No. Box Qty ST 29/ BC 93.1.203.0 Z.99.902.0 2 V A A Materials PCB terminals Insulating component: PA / grey, UL 94-V-2 Clamping parts: nickel plated brass Clamping screw: galvanised steel Contact spring: tin plated bronze Header Insulating component: reinforced PBT grey, UL 94-V0 Contact pin: tin plated brass 320

wiecon Accessories Accessories Coding L = PCB terminal S = header 1. combination 2. combination 3. combination 4. combination. combination. combination 7. combination 8. combination 9. combination. combination 11. combination. combination 13. combination 14. combination etc. Coding parts, pieces on branch Marking tag, S L L L L L L S S L L L L L S L S L L L L S L L S L L L S L L L S L L S L L L L S L S L L L L L S S L L L L L L L S L L L L L S L S L L L L S L L S L L L S L L L S L L S L L L L S L S L L L L L S S L L L L L L L S L L L L S Type Part No. Box Qty Top connector 970 A 970 AB 0.99.803.0 04.242.08.0 04.842.08.0 0 0 A variation of the top system is a header which can be soldered into PCB s. The pin spacing is.08 mm. Two holes are provided for fixing the header and there are facilities for: strain relief locking marking Dovetail guides enable several headers to be snapped on and only the outside plug connectors in this grouping need to be mechanically fixed to the PCB. In order to guarantee the stability required for the PCB s it is recommended that no more than four headers are included in a group. Terminal block, header, the relevant plug or a plug in module each have eight locators for coding pins. Coding both parts is a reliable way of preventing the top connection system mating incorrectly. 321

wiecon PCB Two part PCB spring loaded terminal, Type 820 B A PCB terminal with a spring loaded connection has the advantage that contact to the printed circuit board can be established quickly and economically. Wieland Electric had designed its new PCB terminal type 820 with this in mind. The main areas of use for this type of PCB terminal are in applications where high volumes require an efficient and cost effective operation. System features: no screw fixing minimised wiring time consistency of clamping force resistant to vibrations and shocks maintenance free Several versions of type 820 can service a variety of applications. They are available as a two part header terminal connector and as a soldered design with both straight and angled soldering pins. The rated cross section is 0. mm 2 for single core. The conductor can therefore be plugged in easily without having to operate the header clamping spring as part of the same operation. The pitch is 3. mm (7.00mm on request). The pole numbers range from 2 to 1 poles. 322

wiecon Page 324 Page 32 Page 32 Type 820 820 820 B BL/...W BL/...G Pitch mm 3./7.00 3./7.00 3./7.00 Cross section mm 2 0.2 0. 0.2 0. 0.2 0. Pole 2 1 2 1 2 1 323

wiecon PCB Two part PCB terminal with spring loaded connection, Type 820, pitch 3./7.00 mm, 2 x 0. mm 2 Rated cross section 0. mm 2 Rated current: 4 A Wire range: 0.2 0. mm 2 single core 2 connections per pole Pitch 3. mm Pitch 3. mm 10 V/2. kv/3 overvoltage category III 2 V/2. kv/2 overvoltage category II *90 V/2. kv/1 overvoltage category I * max. 00 V for non earthed systems or expected overvoltage 3 kv for L 2.0 mm and 2. kv for 2.0 mm > L 1. mm Rated voltages VDE 01 (Pitch 3. mm) UL Data CSA Data Approvals in preparation Pitch 3. mm 0 0 0 0 0 0 0 2 2 2 2 2 2 2 2 7.0. 14.0 17. 21.0 24. 28.0 31. 3.0 38. 42.0 4. 49.0 2..0 3. 7.0. 14.0 17. 21.0 24. 28.0 31. 3.0 38. 42.0 4. 49.0 2. 2 3 4 7 8 9 11 13 14 1 1 Type 820 B Connection horizontal and vertical No. 24 20 AWG V 4 A No. 24 20 AWG 1 V 4 A Box Qty G T Pole Part No. Part No. Part No. Part No. 2.470.023.0 2.470.033.0 2.470.043.0 2.470.03.0 2.470.03.0 2.470.073.0 2.470.083.0 2.470.093.0 2.470.3.0 2.470.113.0 2.470.3.0 2.470.133.0 2.470.143.0 2.470.13.0 2.470.13.0 2.470.323.0 2.470.333.0 2.470.343.0 2.470.33.0 2.470.33.0 2.470.373.0 2.470.383.0 2.470.393.0 2.470.403.0 2.470.413.0 2.470.423.0 2.470.433.0 2.470.443.0 2.470.43.0 2.470.43.0 PCB header 820 S Connection vertical to PCB Colour: grey Z.3.022.0 Z.3.032.0 Z.3.042.0 Z.3.02.0 Z.3.02.0 Z.3.072.0 Z.3.082.0 Z.3.092.0 Z.3.2.0 Z.3.1.0 Z.3.2.0 Z.3.132.0 Z.3.142.0 Z.3..0 Z.3..0 Colour: grey Colour: black Solder pin Ø 0.8 mm Solder pin Ø 1.0 mm Drill hole. Ø 1.0 mm Drill hole. Ø 1.2 mm Colour: black Z.3.322.0 Z.3.332.0 Z.3.342.0 Z.3.32.0 Z.3.32.0 Z.3.372.0 Z.3.382.0 Z.3.392.0 Z.3.402.0 Z.3.4.0 Z.3.422.0 Z.3.432.0 Z.3.442.0 Z.3.42.0 Z.3.42.0 Pitch 7.00 mm Rated voltages (Pitch 7.00 mm): VDE 01 on request 400 V/ kv/3 overvoltage category III 90 V/ kv/2 overvoltage category II 0 V/ kv/1 overvoltage category I Materials PCB terminals Insulating component: PA /. UL 94-V0 Clamping spring: special copper alloy, tin plated Header Insulating component: reinforced PA / grey or black, UL 94-V0 Contact pin: tin plated brass 324

wiecon PCB terminal with spring loaded connection, Type 820, pitch 3./7.00 mm, 2 x 0. mm 2 Rated cross section 0. mm 2 Rated current: 4 A Wire range: 0.2 0. mm 2 single core 2 connections per pole Pitch 3. mm Pitch 3. mm 10 V/2. kv/3 overvoltage category III 2 V/2. kv/2 overvoltage category II *90 V/2. kv/1 overvoltage category I * max. 00 V for non earthed systems or expected overvoltage 3 kv for L 2.0 mm and 2. kv for 2.0 mm > L 1. mm Solder pin 0.2 x 1.0 mm Drill hole Ø 1.1 mm Rated voltages VDE 01 UL Data CSA Data Approvals in preparation 0 0 0 0 0 0 0 2 2 2 2 2 2 2 2 7.0. 14.0 17. 21.0 24. 28.0 31. 3.0 38. 42.0 4. 49.0 2..0 3. 7.0. 14.0 17. 21.0 24. 28.0 31. 3.0 38. 42.0 4. 49.0 2. 2 3 4 7 8 9 11 13 14 1 1 Type 820 BL/...W Conductor horizontal to PCB No. 24 20 AWG V 4 A No. 24 20 AWG 1 V 4 A 2.471.023.0 2.471.033.0 2.471.043.0 2.471.03.0 2.471.03.0 2.471.073.0 2.471.083.0 2.471.093.0 2.471.3.0 2.471.113.0 2.471.3.0 2.471.133.0 2.471.143.0 2.471.13.0 2.471.13.0 2.471.323.0 2.471.333.0 2.471.343.0 2.471.33.0 2.471.33.0 2.471.373.0 2.471.383.0 2.471.393.0 2.471.403.0 2.471.413.0 2.471.423.0 2.471.433.0 2.471.443.0 2.471.43.0 2.471.43.0 Type 820 BL/...G Conductor vertical to PCB No. 24 20 AWG V 4 A No. 24 20 AWG 1 V 4 A Box Qty G T Pole Part No. Part No. Part No. Part No. Pitch 3. mm 2.472.023.0 2.472.033.0 2.472.043.0 2.472.03.0 2.472.03.0 2.472.073.0 2.472.083.0 2.472.093.0 2.472.3.0 2.472.113.0 2.472.3.0 2.472.133.0 2.472.143.0 2.472.13.0 2.472.13.0 2.472.323.0 2.472.333.0 2.472.343.0 2.472.33.0 2.472.33.0 2.472.373.0 2.472.383.0 2.472.393.0 2.472.403.0 2.472.413.0 2.472.423.0 2.472.433.0 2.472.443.0 2.472.43.0 2.472.43.0 Pitch 7.00 mm Rated voltages (Pitch 7.00 mm): VDE 01 on request 400 V/ kv/3 overvoltage category III 90 V/ kv/2 overvoltage category II 0 V/ kv/1 overvoltage category I Drilling plan for version with 3./7.00 mm pitch with angled solder pin and locating cams 32

wiecon PCB PCB edge connector terminals Edge connection describes the method used to connect a plug in terminal to a PCB without using a special connecting element such as a pluggable or pin header System features rising cage clamp detachable connection clear, straight forward interconnection PCB thickness: 1.4 mm up to 1.8 mm floating contact springs ensure a secure resistant clamping function to the PCB Coding coding does not effect the number of available poles PCB with coding slots for the location of the plug-in barriers in the contact part Coding can be effected by uilising slots in the contact part of the connector Card holder for secure connection to the PCB and plug in connector special card brackets act as a guide when using large PCB s. With side locating cams at the top and bottom for attaching a perforated guide frame Materials Metal components: made from special alloys and/or special surface treatments minimum contact resistance high corrosion protection Insulating housing: high quality polyamide, used because of its excellent electrical, mechanical and chemical properties (see facts & DATA section) material in accordance with US-Norm UL 94-V0 Colour grey, similar to RAL 7032 32 Marking by means of inkjet printer directly onto the using indelible ink clear pole marking which is easy to read special marking is possible on request abbreviations for plastic material marking PA / = Polyamide / PC = Polycarbonate PBT = Polybutylenterephthalate Type range 3. mm and mm pitch 2 24 pole can be supplied connecting conductor sizes up to 1. mm 2 with open side walls for expansion without effecting the pitch or with closed side walls and therefore no possibility of miss connection with or without solder pin Note: The conductor size and connecting voltage current capacity relate to unprepared conductors without ferrules. The rated current specified corresponds to the maximum load of PCB terminal and the size of the connected conductor. The rated voltage is specified in accordance with DIN VDE 01 Part 1 (IEC 0 4-1) Insulation regulations for electrical equipment in low voltage installations and refers to the received condition of the PCB terminals. When fitting PCB terminals to the PCB, the appropriate terminal should be selected with consideration given to the relevant electrical and physical properties suitable to the application. Also, attention should be paid to circuit board tracking, creepage and clearances as well as distances between individual conductor and solder pads. In addition, the various forms of environmental pollutants and their degree of influence can effect the performance of a piece of equipment. A system approach is therefore required to ensure that the electrical and other parameters of the PCB terminal match those governed by the functionality of the printed circuit board design.

wiecon Page 328 Page 328 Page 330 Page 330 Type DST 8 DSTLF 8 LPST 1 LPSTL 1 Pitch mm 3. 3..00.00 Cross section mm 2 1. 1. 2. 2. Pole 2 24 2 24 2 20 2 20 It is necessary to ensure for all soldered PCB terminals without an insulation plate that the torques are supported when the clamping screws are tightened i.e. that the terminals are locked against rotation. For prototypes, it is recommended that only 2 and 3 pole versions should be used with a contact plate/locating cams. 327

wiecon PCB PCB edge connector, pitch 3. mm Rated cross section 1. mm 2 Rated current: A Wire range: 0.14 1. mm 2 single-/finely stranded V/2. kv/3 overvoltage category III 2 V/2. kv/2 overvoltage category II *90 V/2. kv/1 overvoltage category I * max. 00 V for non earthed systems or expected overvoltage 3 kv for L 2.0 mm and 2. kv for 2.0 mm > L 1. mm M 2 M 2 Rated voltages VDE 01 UL Data CSA Data Approvals Pitch 3. mm 7.1. 14.0 17. 21.0 24. 28.0 31. 3.0 38. 42.0 3.4.8.3 13.8 17.3 20.8 24.3 27.8 31.3 34.8 38.3 2 3 4 7 8 9 11 Type DST 8 Connection in line with conductor No. 30 14 AWG 300 V A No. 30 14 AWG 300 V A igqw 2.003.023.0 2.003.033.0 2.003.043.0 2.003.03.0 2.003.03.0 2.003.073.0 2.003.083.0 2.003.093.0 2.003.3.0 2.003.113.0 2.003.3.0 2.002.023.0 2.002.033.0 2.002.043.0 2.002.03.0 2.002.03.0 2.002.073.0 2.002.083.0 2.002.093.0 2.002.3.0 2.002.113.0 2.002.3.0 Type DST LF 8 Connection in line with conductor No. 30 14 AWG 300 V A No. 30 14 AWG 300 V A igqw Box Qty G T Pole Part No. Part No. Part No. Part No. only available up to pole 2.00.023.0 2.00.033.0 2.00.043.0 2.00.03.0 2.00.03.0 2.00.073.0 2.00.083.0 2.00.093.0 2.00.3.0 2.00.113.0 2.00.3.0 2.004.023.0 2.004.033.0 2.004.043.0 2.004.03.0 2.004.03.0 2.004.073.0 2.004.083.0 2.004.093.0 2.004.3.0 2.004.113.0 2.004.3.0 Thickness of PCB: 1.4 mm 1.8 mm Materials PCB terminals Insulating housing: PA / grey, UL 94-V0 Clamping parts: nickel plated brass Clamping screw: galvanised steel Contact spring: tin plated bronze 328

wiecon 329

wiecon PCB PCB edge connector, pitch.00 mm Rated cross section: 2. mm 2 Rated current: A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded 200 V/4 kv/3 overvoltage category III 320 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I M 2. M 2. Rated voltages VDE 01 UL Data CSA Data Approvals pitch.00 mm 2 30 3 40 4 0 70 7 80 8 90 9 14 19 24 29 34 39 44 49 4 9 4 9 74 79 84 1 20 2 30 3 40 4 0 70 7 2 3 4 7 8 9 11 13 14 1 1 17 to 20 pole on request without solder connection for PCB Type LPST 1 connection at 90 to conductor No. 22 14 AWG 300 V A No. 22 14 AWG 300 V A igqw Box Qty U G T Pole Part No. Part No. Part No. 2.000.02.0 2.000.03.0 2.000.04.0 2.000.0.0 2.000.0.0 2.000.07.0 2.000.08.0 2.000.09.0 2.000..0 2.000.11.0 2.000..0 2.000.13.0 2.000.14.0 2.000.1.0 2.000.1.0 2.0.02.0 2.0.03.0 2.0.04.0 2.0.0.0 2.0.0.0 2.0.07.0 2.0.08.0 2.0.09.0 2.0..0 2.0.11.0 2.0..0 2.0.13.0 2.0.14.0 2.0.1.0 2.0.1.0 Type LPSTL 1 connection at 90 to conductor No. 22 14 AWG 300 V A No. 22 14 AWG 300 V A igqw with solder connection for PCB 2.001.02.0 2.001.03.0 2.001.04.0 2.001.0.0 2.001.0.0 2.001.07.0 2.001.08.0 2.001.09.0 2.001..0 2.001.11.0 2.001..0 2.001.13.0 2.001.14.0 2.001.1.0 2.001.1.0 Thickness of PCB: 1.4 mm 1.8 mm Materials PCB terminals Insulating housing: reinforced PA grey, UL 94-V2 Clamping part: nickel plated brass Clamping screw: galvanised steel Contact spring: bronze silver plated for LPST 1 tin plated for LPSTL 1 330

wiecon Accessories.. Type Part No. Box Qty Mounting bracket H 93. mm with PCB guide locating lever 0.93.883.0 0.94.33.0 200 The PCB edge connectors are fixed by means of mounting brackets. PCB guides are to be used with the card bracket in the case of large PCBs. These brackets have locating cams top and bottom and on both sides to which perforated strips can be fixed if necessary. This provides a stable guide frame. Mounting bracket H 74 mm with PCB guide with locating cams 0.99.283.0 without locating cams 0.99.293.0 Perforated strip 07.413.33.0 * Coding chip 0.93.77.0 0 Mounting bracket 0.22.73.0 200 Mounting bracket 0.22.78.0 200 Centre clamp 0.22.77.0 * outer wall can be right, left or absent as components are created by cutting to the corresponding number of poles external coding is not possible 331

wiecon PCB PCB terminals Systems feature PCB terminals with rising cage clamp connection PCB terminal with spring loaded connection PCB terminal with top connection terminal can be soldered directly onto PCB low mechanical loading of the solder area straight forward interconnection conductors can be individually matched to the relevant applications various numbers of pole combinations connection of single core and finely stranded conductors between 0.14 mm 2 and 1 mm 2 metric and imperial pitch sizes. The pitch measured in inches can be identified by a pip on the conductor guide funnel conductor clamping by means of rising cage clamp with/without wire protection Type range 2 24 poles connection of conductors horizontal and vertical in relation to the PCB conductors can be connected at a 4 or 3 with metric: 3.//7./) mm or imperial: 3.81/.08/ 7. 2/.1/20.32 mm slot together individual terminals multipole blocks with or without insulating plate with or without testing plug connection with or without fixing cams Materials metal components made from special alloys and/or special surface treatments low contact resistance high corrosion protection secure, dynamic clamping functions Insulating housing high quality Polyamide / used because of its excellent electrical, mechanical and chemical properties (see individual terminals for material marking) Benefits material in accordance with UL 94-V0 glass filled for additional reinforcement Marking by means of ink jet printing directly onto the terminal using indelible ink individual terminals can be using snap-on marking tags terminals with or without marking tag carrier special marking is possible on request DQS certification for all product areas Quality standard in accordance with DIN ISO 9001 In development, production and installation Continued control of the quality standard by means of regular internal and external quality audits Compatible with certificates of other countries: BSI, Great Britain SQS, Switzerland Aib-Vincotte, Belgium ÖQS, Austria Abbreviations for plastic material markings PA / = Polyamide / PC = Polycarbonate PBT = Polybutylenterephthalate 332

wiecon Insulating plate metal components covered with a plastic plate The safety ratings for creepage distances and clearances can be observed even with the PCB tracks directly under the PCB terminal with 2 and 3 pole terminals, fixing cams on the insulating plate reduce the effect of mechanical force on terminal and solder area Top connection screw connection parallel to the connecting lead very good accessibility for the operator in restricted installation conditions snap-on marker tag double solder pins for stability Individual terminals terminals snap together individually secure connection the pitch can be expanded by means of an intermediate plate pitches available in the following sizes:. 00/.08/.3/7. / 7. 2/.00/.1/20.32 mm with cover plate double solder pins for stability Note: The conductor size and connecting voltage/current capacity relate to unprepared conductors without ferrules. The rated current specified corresponds to the maximum load of the PCB terminal and the size of the connected conductor. The rated voltage is specified in accordance with DIN VDE 01 Part 1 (IEC 0 4-1) Insulation regulations for electrical equipment in low voltage installations and refers to the received condition of the PCB terminals. When fitting PCB terminals to the PCB, the appropriate terminal should be selected with consideration given to the relevant electrical and physical properties suited to the application. Also, attention should be paid to circuit board tracking creepage and clearances as well as distances between individual conductors and solder pads. In addition, the various forms of environmental pollutants and their degree of influence can effect the performance of a piece of equipment. A system approach is therefore required to ensure that the electrical and other parameters of the PCB terminal match those governed by the functionality of the printed circuit board design. Special terminals snap together individually pitch.08 mm secure fixing to the PCB with double solder pins modular terminal disconnect terminal fuse terminal with removable fuse link and integrated return conductor test socket for 2 mm or 3 mm test plug 333

PCB terminals wiecon PCB PCB terminals Cross section (finely stranded) pitch Rising cage clamp 1 mm 2 3. 893 page 33 3.81 8893 page 33 1. mm 2.00/.00 8192 page 338 8192 ZW page 339 8134 page 30 8192 E page 34 819 D page 372 819 V page 37.08 8292 page 338 8292 ZW page 339 8234 page 30 8292 H page 341 8292 EH 8292 DH page 340 page 340 8292 E page 34 7. 7.2 2. mm 2.00/.00 8190 page 38 8191 page 344 8191 ZW page 34 813 page 32 8190 E page 38 8191 E page 37 8191 D page 37.00.08 7. 7.2 8191 R page 342 8291 R page 342 8291 page 37 8390 page 39 8491 page 34 8491 page 34 8191 page 344 8291 ZW page 37 8391 ZW page 347 8491 ZW page 347 823 page 37 8291 E page 37 8291 D page 37 819 D page 372 819 V page 373 4 mm 2.3 7. 7.2.00 mm 2.1 772 L2 page 37 772 L4 773 L2/W page 37 page 37 20.32 772 L2 page 37 334

wiecon Top connection Special terminals Spring clamp terminals 8 TOP V page 348 8 TOP V page 348 8 TOP H page 348 8 TOP H page 348 818 TOP V page 349 828 TOP V page 349 818 TOP H page 3 828 TOP H page 3 827 page 378 827 TKS page 378 827 Si-D page 379 818 TOP V page 33 828 TOP V page 33 818 TOP H page 33 828 TOP H page 33 838 TOP V page 31 838 TOP H page 32 838 TOP V page 838 TOP H page 848 TOP V page 31 848 TOP H page 32 848 TOP V page 34 848 TOP H page 34 738 TOP H page 3 837 page 374 848 TOP H page 3 848 TOP V page 3 837 page 374 33

wiecon PCB PCB terminal, rising cage clamp system pitch 3./3.81 mm Rated cross section: 1.0 mm 2 Rated current: A Wire range: 0.14 1. mm 2 single core/ 0.14 1.0 mm 2 finely stranded without insulating plate with insulating plate 10 V/2. kv/3 overvoltage category III *2 V/2. kv/2 overvoltage category II **90 V/2. kv/1 overvoltage category I Solder pin 0. x 0.9 mm Drill hole Ø 1.1 mm * up to 400 V in overvoltage category I or expected overvoltage 3 kv for L 2.0 mm and 2. kv for 2.0 mm > L 1. mm ** max. 00 V for non-earthed systems or expected overvoltage 3 kv for L 2.0 mm and 2. kv for 2.0 mm > L 1. mm Rated voltages VDE 01 UL Data CSA Data Approvals pitch 3. mm 7.0. 14.0 17. 21.0 24. 28.0 31. 3.0 38. 42.0 4. 49.0 2..0 3. 7.0. 14.0 17. 21.0 24. 28.0 31. 3.0 38. 42.0 4. 49.0 2. 2 3 4 7 8 9 11 13 14 1 1 17 to 24 pole on request Type 893/8893 Conductor horizontal to PCB No. 30 1 AWG 300 V A No. 30 1 AWG 300 V A igqw Box Qty L T Pole Part No. Part No. Part No. Part No. without insulating plate 2.19.023.0 2.19.033.0 2.19.043.0 2.19.03.0 2.19.03.0 2.19.073.0 2.19.083.0 2.19.093.0 2.19.3.0 2.19.113.0 2.19.3.0 2.19.133.0 2.19.143.0 2.19.13.0 2.19.13.0 M 2 without insulating plate 2.194.023.0 2.194.033.0 2.194.043.0 2.194.03.0 2.194.03.0 2.194.073.0 2.194.083.0 2.194.093.0 2.194.3.0 2.194.113.0 2.194.3.0 2.194.133.0 2.194.143.0 2.194.13.0 2.194.13.0 Materials Insulating housing: PA / grey, UL 94-V2 Clamping part: nickel plated brass Contact and solder pin: tin plated bronze Clamping screw: galvanised steel with insulating plate with locating cams 2.19.923.0 2.19.933.0 with insulating plate with locating cams 2.194.923.0 2.194.933.0 pitch 3.81 mm 7.2 11.43 1.24 3.81 7.2 11.43 2 3 4 without insulating plate 2.197.023.0 2.197.033.0 2.197.043.0 without insulating plate 2.19.023.0 2.19.033.0 2.19.043.0 with insulating plate with locating cams 2.197.923.0 2.197.933.0 with insulating plate with locating cams 2.19.923.0 2.19.933.0 19. 22.8 2.7 1.24 19.0 22.8 7 2.197.03.0 2.197.03.0 2.197.073.0 2.19.03.0 2.19.03.0 2.19.073.0 30.48 34.29 38. 2.7 30.48 34.29 8 9 2.197.083.0 2.197.093.0 2.197.3.0 2.19.083.0 2.19.093.0 2.19.3.0 41.91 4.72 49.3 38. 41.91 4.72 11 13 2.197.113.0 2.197.3.0 2.197.133.0 2.19.113.0 2.19.3.0 2.19.133.0 3.34 7.1 0.9 49.3 3.34 7.1 14 1 1 17 to 24 pole on request 2.197.143.0 2.197.13.0 2.197.13.0 2.19.143.0 2.19.13.0 2.19.13.0 33

wiecon with insulating plate and locating cams Drilling plan for version with locating cams Part No. with insulating plate without locating cams on request Part No. with insulating plate without locating cams on request with insulating plate without locating cams on request with insulating plate without locating cams on request 337

wiecon PCB PCB terminal, rising cage clamp system, pitch.00/.08 mm Rated cross section: 1. mm 2 Rated current: A Wire range: 0.14 2. mm 2 single core/ 0.14 1. mm 2 finely stranded without insulating plate with insulating plate 2 V/4 kv/3 overvoltage category III *90 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I * max. 00 V for non-earthed systems or expected overvoltage 4 kv Rated voltages VDE 01 UL Data CSA Data Approvals pitch.00 mm. 1. 20. 2. 30. 3. 40. 4... 0.. 70. 7. 80. 1 20 2 30 3 40 4 0 70 7 2 3 4 7 8 9 11 13 14 1 1 17 to 24 pole on request Type 8192/8292 Conductor horizontal to PCB No. 30 14 AWG 300 V 1/1 A No. 30 14 AWG 300 V 1 A üigqwd Box Qty G T Pole Part No. Part No. Part No. Part No. without insulating plate 2.191.023.0 2.191.033.0 2.191.043.0 2.191.03.0 2.191.03.0 2.191.073.0 2.191.083.0 2.191.093.0 2.191.3.0 2.191.113.0 2.191.3.0 2.191.133.0 2.191.143.0 2.191.13.0 2.191.13.0 M 3 2.190.023.0 2.190.033.0 2.190.043.0 2.190.03.0 2.190.03.0 2.190.073.0 2.190.083.0 2.190.093.0 2.190.3.0 2.190.113.0 2.190.3.0 2.190.133.0 2.190.143.0 2.190.13.0 2.190.13.0 without insulating plate Solder pin 0. x 1 mm Drill hole Ø 1.2 mm Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: nickel plated brass Contact and solder pin: tin plated bronze Clamping screw: galvanised steel with insulating plate with locating cams 2.191.923.0 2.191.933.0 with insulating plate with locating cams 2.190.923.0 2.190.933.0 pitch.08 mm.71 1.79 20.87.08.1 1.24 2 3 4 without insulating plate 2.193.023.0 2.193.033.0 2.193.043.0 without insulating plate 2.192.023.0 2.192.033.0 2.192.043.0 with insulating plate with locating cams 2.193.923.0 2.193.933.0 with insulating plate with locating cams 2.192.923.0 2.192.933.0 2.9 31.03 3.11 20.32 2.40 30.48 7 2.193.03.0 2.193.03.0 2.193.073.0 2.192.03.0 2.192.03.0 2.192.073.0 41.19 4.27 1.3 3. 40.4 4.72 8 9 2.193.083.0 2.193.093.0 2.193.3.0 2.192.083.0 2.192.093.0 2.192.3.0.43 1.1.9.80.88 0.9 11 13 2.193.113.0 2.193.3.0 2.193.133.0 2.192.113.0 2.192.3.0 2.192.133.0 71.7 7.7 81.83.04 71. 7.20 14 1 1 2.193.143.0 2.193.13.0 2.193.13.0 2.192.143.0 2.192.13.0 2.192.13.0 17 to 24 pole on request 338

wiecon with insulating plate with locating cams with insulating plate, horizontal Drilling plan for version with locating cams Solder pin 0. x 1 mm Drill hole Ø 1.2 mm M 3 VDE 01 UL-Daten CSA-Daten Zulassungen Part No. with insulating plate without locating cams on request field/factory wiring Part No. with insulating plate without locating cams Type 8192 ZW/8292 ZW Conductor vertical to PCB No. 30 14 AWG 300 V 1/1 A No. 30 14 AWG 300 V 1 A qwid with insulating plate horizontal 2.191.23.0 2.191.33.0 2.191.43.0 2.191.3.0 2.191.3.0 2.191.73.0 2.191.83.0 2.191.93.0 2.191.703.0 2.191.713.0 2.191.723.0 2.191.733.0 2.191.743.0 2.191.73.0 2.191.73.0 with insulating plate horizontal on request with insulating plate without locating cams on request with insulating plate without locating cams with insulating plate horizontal 2.193.23.0 2.193.33.0 2.193.43.0 with insulating plate horizontal on request 2.193.3.0 2.193.3.0 2.193.73.0 2.193.83.0 2.193.93.0 2.193.703.0 2.193.713.0 2.193.723.0 2.193.733.0 2.193.743.0 2.193.73.0 2.193.73.0 339

wiecon PCB PCB terminal, rising cage clamp system, pitch.00/.08 mm Rated cross section: 1. mm 2 Rated current Rated current Rated current 1 A for Type 8292 DH 1 A for Type 8292 EH 1 A for Type 8292 H (based on ambient temperature of 20 C, rated cross section and max. number of poles) G T 11,1 G T,4 Wire range: 0. 1. mm 2 single core/finely stranded 3, 2,2 2 V/4 kv/3 overvoltage category III 2 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I,08 3,,08 3, Solder pin 0.8 x 1 mm Drill hole Ø 1.3 mm Solder pin 0.8 x 1 mm Drill hole Ø 1.3 mm M 2. Rated voltages VDE 01 UL Data CSA Data Approvals.1 1.24 field wiring field wiring.08.1 2 3 Type 8292 DH No. 24 14 AWG 300 V A No. 24 14 AWG 300 V A qw 27.000.423.0 27.000.433.0 Type 8292 EH No. 24 14 AWG 300 V A No. 24 14 AWG 300 V A Box Qty G T Pole Part No. Part No. Part No. Part No. pitch.08 mm qw 27.000.223.0 27.000.233.0 A supporting element for the 8292 DH should be provided on the PCB. A supporting element for the 8292 EH should be provided on the PCB. 340

wiecon G T 13,,08 3, Solder pin 0.8 x 1 mm Drill hole Ø 1.3 mm M 2. Type 8292 H No. 24 14 AWG 300 V A No. 24 14 AWG 300 V A qw Part No. 27.000.023.0 27.000.033.0 Part No. 341

wiecon PCB PCB terminal, rising cage clamp system, pitch.00/.08 mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: nickel plated brass Contact and solder pin: tin plated E-Cu Clamping screw: galvanised steel 2 V/4 kv/3 overvoltage category III *90 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I * max. 00 V for non-earthed systems or expected overvoltage 4 kv Rated voltages VDE 01 UL Data CSA Data Approvals pitch.00 mm 0 0 2 2 200 200.8 1.8 20.8 2.8 30.8 3.8 40.8 4.8.8.8 0.8.8 70.8 1 20 2 30 3 40 4 0 2 3 4 7 8 9 11 13 14 Type 81 8291 R Conductor horizontal to PCB )(with closed test probe) No. 22 AWG 300 V 20/30 A No. 22 AWG 300 V 2 A üqw Box Qty G T Pole Part No. Part No. Type 8191 R with insulating plate 2.1.023.0 2.1.033.0 2.1.043.0 2.1.03.0 2.1.03.0 2.1.073.0 2.1.083.0 2.1.093.0 2.1.3.0 2.1.113.0 2.1.3.0 2.1.133.0 2.1.143.0 M 3. Solder pin 1 x 0.8 mm Drill hole Ø 1.3 mm Available with slotted screw on request with insulating plate 2.1.223.0 2.1.233.0 2.1.243.0 2.1.23.0 2.1.23.0 2.1.273.0 2.1.283.0 2.1.293.0 2.1.303.0 2.1.313.0 2.1.323.0 2.1.333.0 2.1.343.0 pitch.08 mm 0 0 2 11.01 1.09 21.17 Type 8291 R.08.1 1.24 2 3 4 with insulating plate 2.1.023.0 2.1.033.0 2.1.043.0 with insulating plate 2.1.223.0 2.1.233.0 2.1.243.0 2 200 200 2.2 31.33 3.41 20.32 2.40 30.48 7 2.1.03.0 2.1.03.0 2.1.073.0 2.1.23.0 2.1.23.0 2.1.273.0 41.49 4.7 1. 3. 40.4 4.72 8 9 2.1.083.0 2.1.093.0 2.1.3.0 2.1.283.0 2.1.293.0 2.1.303.0.73 1.81.89.80.88 0.9 11 13 2.1.113.0 2.1.3.0 2.1.133.0 2.1.313.0 2.1.323.0 2.1.333.0 71.97.04 14 2.1.143.0 2.1.343.0 342

wiecon PCB terminal, rising cage clamp system, pitch.00/.1 mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: nickel plated brass Contact and solder pin: tin plated E-Cu Clamping screw: galvanised steel 90 V/8 kv/3 overvoltage category III 0 V/8 kv/2 overvoltage category II 0 V/8 kv/1 overvoltage category I Rated voltages VDE 01 UL Data CSA Data Approvals pitch.00 mm 0 2 200 1 2 3 4 20 30 40 0 2 3 4 7 Type 81 8291 R Conductor horizontal to PCB (with closed test probe, each fitted with 2 poles) No. 22 AWG 00 V 20/30 A No. 22 AWG 00 V 2 A üqw Box Qty G T Pole Part No. Part No. Type 8191 R with insulating plate 2.17.023.0 2.17.033.0 2.17.043.0 2.17.03.0 2.17.03.0 2.17.073.0 M 3. Solder pin 1 x 0.8 mm Drill hole Ø 1.3 mm Available with slotted screw on request with insulating plate 2.17.3.0 2.17.133.0 2.17.143.0 2.17.13.0 2.17.13.0 2.17.173.0 pitch.1 mm 0 2 200 1.24 2.40 3. Type 8291 R.1 20.32 30.48 2 3 4 with insulating plate 2.17.423.0 2.17.433.0 2.17.443.0 with insulating plate 2.17.23.0 2.17.33.0 2.17.43.0 4.72.88.04 40.4.80 0.9 7 2.17.43.0 2.17.43.0 2.17.473.0 2.17.3.0 2.17.3.0 2.17.73.0 343

wiecon PCB PCB terminal, rising cage clamp system, pitch.00/.08/.00 mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded Rated voltages: pitch.00/.08 mm VDE 01 2 V/4 kv/3 overvoltage category III *90 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I pitch.00/.08 mm, without insulating plate pitch.00 mm, without insulating plate with insulating plate, without locating cams with insulating plate, without locating cams Rated voltages: pitch.00 mm VDE 01 90 V/8 kv/3 overvoltage category III 0 V/8 kv/2 overvoltage category II 0 V/8 kv/1 overvoltage category I * max. 00 V for non-earthed systems or expected overvoltage 4 kv Rated voltages VDE 01 UL Data CSA Data Approvals pitch.00 mm pitch.08 mm field/factory wiring.8 1.8 20.8 2.8 30.8 3.8 40.8 4.8.8.8 0.8.8 70.8 7.8 80.8 11.01 1.09 21.17 2.2 31.33 3.41 41.49 4.7 1..73 1.81.89 71.97 77.0 82.13 1 20 2 30 3 40 4 0 70 7.08.1 1.24 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 2 3 4 7 8 9 11 13 14 1 1 2 3 4 7 8 9 11 13 14 1 1 Type 8191/8291 Conductor horizontal to PCB (with open test probe) No. 22 AWG 300 V 20/30 A No. 22 AWG 300 V 2 A üizqwd Box Qty G T Pole Part No. Part No. Part No. Part No. 17 to 24 pole on request 17 to 24 pole on request without insulating plate 2.11.023.0 2.11.033.0 2.11.043.0 2.11.03.0 2.11.03.0 2.11.073.0 2.11.083.0 2.11.093.0 2.11.3.0 2.11.113.0 2.11.3.0 2.11.133.0 2.11.143.0 2.11.13.0 2.11.13.0 2.13.023.0 2.13.033.0 2.13.043.0 2.13.03.0 2.13.03.0 2.13.073.0 2.13.083.0 2.13.093.0 2.13.3.0 2.13.113.0 2.13.3.0 2.13.133.0 2.13.143.0 2.13.13.0 2.13.13.0 M 3 2.10.023.0 2.10.033.0 2.10.043.0 2.10.03.0 2.10.03.0 2.10.073.0 2.10.083.0 2.10.093.0 2.10.3.0 2.10.113.0 2.10.3.0 2.10.133.0 2.10.143.0 2.10.13.0 2.10.13.0 2..023.0 2..033.0 2..043.0 2..03.0 2..03.0 2..073.0 2..083.0 2..093.0 2..3.0 2..113.0 2..3.0 2..133.0 2..143.0 2..13.0 2..13.0. without insulating plate Solder pin 0.9 x 0.9 mm Drill hole Ø 1.3 mm with insulating plate with locating cams 2.171.023.0 2.171.033.0 2.173.023.0 2.173.033.0 with insulating plate with locating cams 2.170.023.0 2.170.033.0 2.172.023.0 2.172.033.0 pitch.00 mm 4 to pole on request 1.8 2.8 20 2 3 2.19.023.0 2.19.033.0 2.18.023.0 2.18.033.0 2.19.23.0 2.19.33.0 2.18.23.0 2.18.33.0 344

wiecon with insulating plate with locating cams with insulating plate horizontal.00/.08 mm Drilling plan for version with locating cams, pitch.00/.08 mm with insulating plate with locating cams with insulating plate horizontal.00 mm Solder pin 0.9 x 0.9 mm Drill hole Ø 1.3 mm M 3. Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: nickel plated brass Contact and solder pin: tin plated E-Cu Clamping screw: galvanised steel Type 8191 ZW/8291 ZW Conductor vertical to PCB No. 22 AWG 300 V 20/30 A No. 22 AWG 300 V 2 A üizqwd Part No. Part No. Part No. Part No. with insulating plate without locating cams on request with insulating plate without locating cams on request with insulating plate horizontal 2.11.23.0 2.11.33.0 2.11.43.0 2.11.3.0 2.11.3.0 2.11.73.0 2.11.83.0 2.11.93.0 2.11.703.0 2.11.713.0 2.11.723.0 2.11.733.0 2.11.743.0 2.11.73.0 2.11.73.0 with insulating plate horizontal 2.10.23.0 2.10.33.0 2.10.43.0 2.10.3.0 2.10.3.0 2.10.73.0 2.10.83.0 2.10.93.0 2.10.703.0 2.10.713.0 2.10.723.0 2.10.733.0 2.10.743.0 2.10.73.0 2.10.73.0 Drilling plan for version with locating cams, pitch.00 mm on request on request 2.13.23.0 2.13.33.0 2.13.43.0 2..23.0 2..33.0 2..43.0 2.13.3.0 2.13.3.0 2.13.73.0 2..3.0 2..3.0 2..73.0 2.13.83.0 2.13.93.0 2.13.703.0 2..83.0 2..93.0 2..703.0 2.13.713.0 2.13.723.0 2.13.733.0 2..713.0 2..723.0 2..733.0 2.13.743.0 2.13.73.0 2.13.73.0 2..743.0 2..73.0 2..73.0 2.19.223.0 2.19.233.0 2.18.223.0 2.18.233.0 2.19.423.0 2.19.433.0 2.18.423.0 2.18.433.0 34

wiecon PCB PCB terminal, rising cage clamp system, pitch 7./7.2 mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded without insulating plate with insulating plate, without locating cams 400 V/ kv/3 overvoltage category III 0 V/ kv/2 overvoltage category II 0 V/ kv/1 overvoltage category I Rated voltages VDE 01 UL Data CSA Data Approvals pitch 7. mm 1.8 23.3 7. 1.0 2 3 4 to 24 pole on request Type 8391/8491 Conductor horizontal to PCB No. 22 AWG 300 V 20/30 A No. 22 AWG 300 V 2 A üizqwd Box Qty G T Pole Part No. Part No. Part No. Part No. without insulating plate 2.1.023.0 2.1.033.0 M 3 2.1.323.0 2.1.333.0. with insulating plate without locating cams Solder pin 0.9 x 0.9 mm Drill hole Ø 1.3 mm Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: nickel plated brass Contact and solder pin: tin plated E-Cu Clamping screw: galvanised steel with insulating plate with locating cams 2.17.023.0 2.17.033.0 without insulating plate 2.14.023.0 2.14.033.0 pitch 7.2 mm 1.09 23.71 7.2 1.24 2 3 without insulating plate 2.17.023.0 2.17.033.0 with insulating plate without locating cams 2.17.323.0 2.17.333.0 with insulating plate with locating cams 2.177.023.0 2.177.033.0 without insulating plate 2.1.023.0 2.1.033.0 4 to 24 pole on request 34

wiecon with insulating plate with locating cams with insulating plate horizontal Drilling plan for versions with locating cams Solder pin 0.9 x 0.9 mm Drill hole Ø 1.3 mm M 3. with insulating plate without locating cams 2.14.323.0 2.14.333.0 2.174.023.0 2.174.033.0 Type 8391 ZW/8491 ZW Conductor vertical to PCB No. 22 AWG 300 V 20/30 A No. 22 AWG 300 V 2 A üizqwd Part No. Part No. Part No. Part No. with insulating plate with locating cams with insulating plate horizontal 2.1.23.0 2.1.33.0 with insulating plate horizontal 2.14.23.0 2.14.33.0 with insulating plate without locating cams 2.1.323.0 2.1.333.0 with insulating plate with locating cams 2.17.023.0 2.17.033.0 with insulating plate horizontal 2.17.23.0 2.17.33.0 with insulating plate horizontal 2.1.23.0 2.1.33.0 347

wiecon PCB PCB terminal, TOP spring clamp, pitch.00/.08 mm Rated cross section: 1. mm 2 G 18, G 22, Rated current: 1 A (based on ambient temperature 20 C rated cross section and max. 22, 18, number of poles) Wire range: 0. 2. mm 2 single core/ 0. 1. mm 2 finely stranded,04 T,04 3,,04 T,04 2, 2 V/4 kv/3 overvoltage category III Solder pin 0.8 x 0.4 mm Drill hole Ø 1.3 mm Solder pin 0.8 x 0.4 mm Drill hole Ø 1.3 mm Type 8 TOP V Type 8 TOP H Rated voltages VDE 01 UL Data CSA Data Approvals pitch.00 mm 8.34 13.38 18.42 23.4 28. 33.4 38.8 43.2 48. 3.70 field wiring.04.08 1. 20.1 2.20 30.24 3.28 40.32 4.30.40 1 2 3 4 7 8 9 No. 2 14 AWG 300 V A No. 22 14 AWG 300 V A qw 27.720.013.0 27.720.023.0 27.720.033.0 27.720.043.0 27.720.03.0 27.720.03.0 27.720.073.0 27.720.083.0 27.720.093.0 27.720.3.0 No. 2 14 AWG 300 V A No. 22 14 AWG 300 V A qw Box Qty G T Pole Part No. Part No. 27.730.013.0 27.730.023.0 27.730.033.0 27.730.043.0 27.730.03.0 27.730.03.0 27.730.073.0 27.730.083.0 27.730.093.0 27.730.3.0 348

wiecon PCB terminal, TOP connection system, pitch.00/.08 mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: galvanised steel Contact and solder pin: tin plated E-Cu Clamp: galvanised steel Clamping screw: galvanised steel 2 V/4 kv/3 overvoltage category III *90 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I * max. 00 V for non-earthed systems or expected overvoltage 4 kv M2. 9 Solder pin 0.8 x 1.0 mm Drill hole Ø 1.3 mm Rated voltages VDE 01 UL Data CSA Data Approvals field-/factory wiring 2 pole 3 pole 4 pole pole pole 7 pole 8 pole 9 pole pole 11 pole pole 13 pole 14 pole 1 pole 1 pole Type 818 TOP V Conductor vertical to PCB No. 22/30 AWG 300 V 20/2 A No. 22 AWG 300 V 20 A qwd Type Part No. Box Qty Type Part No. Box Qty 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 2.741.023.0 2.741.033.0 2.741.043.0 2.741.03.0 2.741.03.0 2.741.073.0 2.741.083.0 2.741.093.0 2.741.3.0 2.741.113.0 2.741.3.0 2.741.133.0 2.741.143.0 2.741.13.0 2.741.13.0 Type 828 TOP V Terminal block pitch.00 mm pitch.08 mm w 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 2.71.023.0 2.71.033.0 2.71.043.0 2.71.03.0 2.71.03.0 2.71.073.0 2.71.083.0 2.71.093.0 2.71.3.0 2.71.113.0 2.71.3.0 2.71.133.0 2.71.143.0 2.71.13.0 2.71.13.0 Individual poles connected in series Pitch.00 and.08 mm 1 pole End plate Marker tag holder, snap-on 1 pole 818 TOP V AP 838 TOP N 2.741.003.0 07.300.473.0 04.242.423.0 828 TOP V AP 838 TOP N 2.71.003.0 07.300.473.0 04.242.423.0 Marker tag holder, snap-on, for group marking, overall width.00 mm Marking strips 1) Marking branch Labelled 1, 2, 3... 0 Single tag 1) Adhesive marking strips 1 ( x) 13 24 ( x) 1) Labelling on request BZ 818 TOP N 970 A// 970 A// B 9704 A/1-0 B 970 A 970 AB 04.242.83.0 04.242.3.0 04.842.3.0 04.841.21.0 04.242.0800.0 04.842.08.0 04.007.4089.0 04.007.4189.0 2 2 2 0 1 1 349

wiecon PCB PCB terminal, TOP connection system, pitch.00/.08 mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: galvanised steel Contact and solder pin: tin plated E-Cu Clamp: galvanised steel Clamping screw: galvanised steel 2 V/4 kv/3 overvoltage category III *90 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I * max. 00 V for non-earthed systems or expected overvoltage 4 kv M 2. 9 Solder pin 0.8 x 1.0 mm Drill hole Ø 1.3 mm Rated voltages VDE 01 UL Data CSA Data Approvals field-/factory wiring 2 pole 3 pole 4 pole pole pole 7 pole 8 pole 9 pole pole 11 pole pole 13 pole 14 pole 1 pole 1 pole Type 818 TOP H Conductor horizontal to PCB No. 22/30 AWG 300 V 20/2 A No. 22 AWG 300 V 20 A qwd Type Part No. Box Qty Type Part No. Box Qty 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 2.741.323.0 2.741.333.0 2.741.343.0 2.741.33.0 2.741.33.0 2.741.373.0 2.741.383.0 2.741.393.0 2.741.403.0 2.741.413.0 2.741.423.0 2.741.433.0 2.741.443.0 2.741.43.0 2.741.43.0 Type 828 TOP H Terminal block pitch.00 mm pitch.08 mm 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 2.71.323.0 2.71.333.0 2.71.343.0 2.71.33.0 2.71.33.0 2.71.373.0 2.71.383.0 2.71.393.0 2.71.403.0 2.71.413.0 2.71.423.0 2.71.433.0 2.71.443.0 2.71.43.0 2.71.43.0 Individual poles connected in series Pitch.00 and.08 mm 1 pole End plate Marker tag holder, snap-on 1 pole 818 TOP H AP 838 TOP N 2.741.013.0 07.300.473.0 04.242.423.0 828 TOP H AP 838 TOP N 2.71.013.0 07.300.473.0 04.242.423.0 Marker tag holder, snap-on, for group marking, overall width.00 mm Marking strips 1) Marking branch Labelled 1, 2, 3... 0 Single tag 1) Adhesive marking strips 1 ( x) 13 24 ( x) 1) Labelling on request BZ 818 TOP N 970 A// 970 A// B 9704 A/1-0 B 970 A 970 AB 04.242.83.0 04.242.3.0 04.842.3.0 04.841.21.0 04.242.08.0 04.842.08.0 04.007.4089.0 04.007.4189.0 2 2 2 0 0 1 1 3

wiecon PCB terminal, TOP connection system, pitch 7./7.2 mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: galvanised steel Contact and solder pin: tin plated E-Cu Clamp: galvanised steel Clamping screw: galvanised steel 400 V/ kv/3 overvoltage category III 0 V/ kv/2 overvoltage category II 0 V/ kv/1 overvoltage category I M 2. 9 Solder pin 0.8 x 1.0 mm Drill hole Ø 1.3 mm Rated voltages VDE 01 UL Data CSA Data Approvals field-/factory wiring 2 pole 3 pole 4 pole pole pole 7 pole 8 pole Pole numbers can be latched together on request Type 838 TOP V Conductor vertical to PCB No. 22/30 AWG 300 V 20/2 A No. 22 AWG 300 V 20 A qwd 838 TOP V 838 TOP V 838 TOP V 838 TOP V 838 TOP V 838 TOP V 838 TOP V 2.71.023.0 2.71.033.0 2.71.043.0 2.71.03.0 2.71.03.0 2.71.073.0 2.71.083.0 Type 848 TOP V No. 22/30 AWG 300 V 20/2 A No. 22 AWG 300 V 20 A qwd Type Part No. Box Qty Type Part No. Box Qty Terminal block pitch 7. mm pitch 7.2 mm 848 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 2.771.023.0 2.771.033.0 2.771.043.0 2.771.03.0 2.771.03.0 2.771.073.0 2.771.083.0 Individual poles connected in series Pitch 7. and 7.2 mm 1 pole End plate Marker tag holder, snap-on 1 pole 838 TOP V AP 838 TOP N 2.71.003.0 07.300.473.0 04.242.423.0 848 TOP V AP 838 TOP N 2.771.003.0 07.300.473.0 04.242.423.0 Marker tag holder, snap-on, for group marking, overall width.00 mm Marking strips 1) Marking branch Labelled 1, 2, 3... 0 Single tag 1) Adhesive marking strips BZ 818 TOP N 970 A/7,/ 970 A/7,/ B 9704 A/1-0 B 970 A 970 AB 04.242.83.0 04.242.73.0 04.842.73.0 04.841.21.0 04.242.08.0 04.842.08.0 2 2 2 0 0 1) Labelling on request 31

wiecon PCB PCB terminal, TOP connection system, pitch 7./7.2 mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: galvanised steel Contact and solder pin: tin plated E-Cu Clamp: galvanised steel Clamping screw: galvanised steel 400 V/ kv/3 overvoltage category III 0 V/ kv/2 overvoltage category II 0 V/ kv/1 overvoltage category I M 2. 9 Solder pin 0.8 x 1.0 mm Drill hole Ø 1.3 mm Rated voltages VDE 01 UL Data CSA Data Approvals field-/factory wiring 2 pole 3 pole 4 pole pole pole 7 pole 8 pole Type 838 TOP H Conductor horizontal to PCB No. 22/30 AWG 300 V 20/2 A No. 22 AWG 300 V 20 A qwd 838 TOP H 838 TOP H 838 TOP H 838 TOP H 838 TOP H 838 TOP H 838 TOP H 2.71.323.0 2.71.333.0 2.71.343.0 2.71.33.0 2.71.33.0 2.71.373.0 2.71.383.0 Type 848 TOP H qwd Type Part No. Box Qty Type Part No. Box Qty Terminal block pitch 7. mm pitch 7.2 mm 848 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 2.771.323.0 2.771.333.0 2.771.343.0 2.771.33.0 2.771.33.0 2.771.373.0 2.771.383.0 Individual poles connected in series Pitch.00 and.08 mm 1 pole End plate Marker tag holder, snap-on 1 pole 838 TOP H AP 838 TOP N 2.71.013.0 07.300.473.0 04.242.423.0 848 TOP H AP 838 TOP N 2.771.013.0 07.300.473.0 04.242.423.0 Marker tag holder, snap-on, for group marking, overall width.00 mm Marking strips 1) Marking branch Labelled 1, 2, 3... 0 Single tag 1) Adhesive marking strips BZ 818 TOP N 970 A/7,/ 970 A/7,/ B 9704 A/1-0 B 970 A 970 AB 04.242.83.0 04.242.73.0 04.842.73.0 04.841.21.0 04.242.08.0 04.842.08.0 2 2 2 0 0 1) Labelling on request 32

wiecon PCB terminal, spring clamp system pitch.00/.08 mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded 2 V/4 kv/3 overvoltage category III *90 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: nickel plated brass Contact and solder pin:tin plated E-Cu Solder pin 0. x 1.1 mm Drill hole Ø 1.3 mm Solder pin 0. x 1.1 mm Drill hole Ø 1.3 mm * max. 00 V for non-earthed systems or expected overvoltage 4 kv 9 9 Rated voltages VDE 01 UL Data CSA Data Approvals in preparation pitch.00 mm Larger pole combinations on request pitch.08 mm Larger pole combinations on request field-/factory wiring 2 pole 3 pole 4 pole pole pole 7 pole 8 pole 9 pole pole 11 pole pole 13 pole 14 pole 1 pole 1 pole 2 pole 3 pole 4 pole pole pole 7 pole 8 pole 9 pole pole 11 pole pole 13 pole 14 pole 1 pole 1 pole Type 818 TOP V Conductor vertical to PCB No. 22/30 AWG No. 22 AWG 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 818 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 828 TOP V 2.780.023.0 2.780.033.0 2.780.043.0 2.780.03.0 2.780.03.0 2.780.073.0 2.780.083.0 2.780.093.0 2.780.3.0 2.780.113.0 2.780.3.0 2.780.133.0 2.780.143.0 2.780.13.0 2.780.13.0 2.781.023.0 2.781.033.0 2.781.043.0 2.781.03.0 2.781.03.0 2.781.073.0 2.781.083.0 2.781.093.0 2.781.3.0 2.781.113.0 2.781.3.0 2.781.133.0 2.781.143.0 2.781.13.0 2.781.13.0 828 TOP V Type 818 TOP H Conductor horizontal to PCB No. 22/30 AWG No. 22 AWG Type Part No. Box Qty Type Part No. Box Qty 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 818 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 828 TOP H 2.790.023.0 2.790.033.0 2.790.043.0 2.790.03.0 2.790.03.0 2.790.073.0 2.790.083.0 2.790.093.0 2.790.3.0 2.790.113.0 2.790.3.0 2.790.133.0 2.790.143.0 2.790.13.0 2.790.13.0 2.791.023.0 2.791.033.0 2.791.043.0 2.791.03.0 2.791.03.0 2.791.073.0 2.791.083.0 2.791.093.0 2.791.3.0 2.791.113.0 2.791.3.0 2.791.133.0 2.791.143.0 2.791.13.0 2.791.13.0 828 TOP H Accessories Adhesive marking strips Labelling on request Test plug 1 ( x) 13 24 ( x) 04.007.4089.0 04.007.4189.0 Z.3.2921.0 1 1 04.007.4089.0 04.007.4189.0 Z.3.2921.0 1 1 33

wiecon PCB PCB terminal, spring clamp system pitch 7./7.2 mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded 400 V/ kv/3 overvoltage category III 0 V/ kv/2 overvoltage category II 0 V/ kv/1 overvoltage category I Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: nickel plated brass Contact and solder pin: tin plated E-Cu Solder pin 0. x 1.1 mm Drill hole Ø 1.3 mm 9 Solder pin 0. x 1.1 mm Drill hole Ø 1.3 mm 9 Rated voltages VDE 01 UL Data CSA Data Approvals in preparation pitch 7. mm Larger pole combinations on request pitch 7.2 mm Larger pole combinations on request field-/factory wiring 2 pole 3 pole 4 pole pole pole 7 pole 8 pole 9 pole pole 11 pole pole 13 pole 14 pole 1 pole 1 pole 2 pole 3 pole 4 pole pole pole 7 pole 8 pole 9 pole pole 11 pole pole 13 pole 14 pole 1 pole 1 pole Type 838 TOP V Conductor vertical to PCB No. 22/30 AWG No. 22 AWG 838 TOP V 838 TOP V 838 TOP V 838 TOP V 838 TOP V 838 TOP V 838 TOP V 838 TOP V 838 TOP V 838 TOP V 838 TOP V 838 TOP V 838 TOP V 838 TOP V 838 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 848 TOP V 2.782.023.0 2.782.033.0 2.782.043.0 2.782.03.0 2.782.03.0 2.782.073.0 2.782.083.0 2.782.093.0 2.782.3.0 2.782.113.0 2.782.3.0 2.782.133.0 2.782.143.0 2.782.13.0 2.782.13.0 2.783.023.0 2.783.033.0 2.783.043.0 2.783.03.0 2.783.03.0 2.783.073.0 2.783.083.0 2.783.093.0 2.783.3.0 2.783.113.0 2.783.3.0 2.783.133.0 2.783.143.0 2.783.13.0 2.783.13.0 848 TOP V Type 838 TOP H Conductor horizontal to PCB No. 22/30 AWG No. 22 AWG Type Part No. Box Qty Type Part No. Box Qty 838 TOP H 838 TOP H 838 TOP H 838 TOP H 838 TOP H 838 TOP H 838 TOP H 838 TOP H 838 TOP H 838 TOP H 838 TOP H 838 TOP H 838 TOP H 838 TOP H 838 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 848 TOP H 2.792.023.0 2.792.033.0 2.792.043.0 2.792.03.0 2.792.03.0 2.792.073.0 2.792.083.0 2.792.093.0 2.792.3.0 2.792.113.0 2.792.3.0 2.792.133.0 2.792.143.0 2.792.13.0 2.792.13.0 2.793.023.0 2.793.033.0 2.793.043.0 2.793.03.0 2.793.03.0 2.793.073.0 2.793.083.0 2.793.093.0 2.793.3.0 2.793.113.0 2.793.3.0 2.793.133.0 2.793.143.0 2.793.13.0 2.793.13.0 848 TOP H Accessories Labelling on request Test plug Z.3.2921.0 Z.3.2921.0 34

wiecon PCB terminal, TOP connection system pitch.3 mm Rated cross section: 4.0 mm 2 G 2 Rated current: 3 A (based on ambient temperature 20 C rated cross section and max. number of poles) 2 Wire range: 0..0 mm 2 single core/ 0. 4.0 mm 2 finely stranded 320 V/4 kv/3 overvoltage category III 320 V/4 kv/2 overvoltage category II 320 V/4 kv/1 overvoltage category I,3 T,1 3, M 3 13 Solder pin Ø 0.8 x 0.9 mm Drill hole Ø 1.3 mm Type 738 TOP H Rated voltages VDE 01 UL Data CSA Data Approvals pitch.3 mm Box Qty G T Pole Part No. 14.20 20. 2.90 33.2 39.0 4.9 2.30 field wiring.3.70 19.0 2.40 31.7 38. 44.4 2 3 4 7 8 No. 22 AWG 300 V 30 A No. 22 AWG 300 V 30 A 27.714.023.0 27.714.033.0 27.714.043.0 27.714.03.0 27.714.03.0 27.714.073.0 27.714.083.0 3

wiecon PCB PCB terminal, TOP connection system pitch 7.2 mm Rated cross section: 4.0 mm 2 G 2 G 2 Rated current: 3 A (based on ambient 20 C, rated cross section and max. number of 2 2 poles) Wire range: 0..0 mm 2 single core/ 0. 4.0 mm 2 finely stranded 7,2 T,1 3, 7,2 T,1 3, 0 V/4 kv/3 Overvoltage category III 30 V/4 kv/2 Overvoltage category II 0 V/4 kv/1 Overvoltage category I Solder pin 0.8 x 0.9 mm Drill hole Ø 1.3 mm M 3 13 13 Solder pin 0.8 x 0.9 mm Drill hole Ø 1.3 mm Rated voltages VDE 01 UL Data CSA Data Approvals pitch 7.2 mm 1.74 24.3 31.98 field wiring 7.2 1.24 22.8 2 3 4 848 TOP V 848 TOP H No. 22 AWG 300 V 30 A No. 22 AWG 300 V 30 A qw 27.703.023.0 27.703.033.0 27.703.043.0 No. 22 AWG 300 V 30 A No. 22 AWG 300 V 30 A qw Box Qty G T Pole Part No. Part No. 27.713.023.0 27.713.033.0 27.713.043.0 3

wiecon Accessories Test plugs and marker holder 8191 E / 8191 D / 8291 E / 8291 can only be used in the upper tier 2 to 24 pole connecting comb for pitch.00 and.08 mm available on request PCB terminals with assembled connecting comb available on request Type 8191 / 8191 E / 8191 D / 8192 Type 8291 / 8291 E / 8291 D Test plug 1 Z.33.71.0 2 Z.33.7221.0 Type 8391/8491 Type 813 / 823 Type 8191 ZW / 8291 ZW / 8192 Pole Part No. Box Qty Pole Part No. Box Qty Pole Part No. Box Qty Test plug 1 Z.33.71.0 2 Z.33.8221.0 Test plug 1 Z.33.71.0 2 Z.33.7221.0 Test plug 1pole pitch mm 1 Z.33.71.0 Marker tag carrier for pole, can be divided for smaller pole numbers 04.242.43.0 Marker strips 04.242.3.0 2 Marked 1, 11 20 etc. 991 999 04.842.3.0 2 Marking branch, labelled 1, 2, 3... 0 04.841.21.0 2 Single tag, 04.242.08.0 0 Marked 04.842.08.0 0 Test plug 1 pole pitch mm 1 Z.33.71.0 Marker tag carrier for pole, can be divided for smaller pole numbers 04.242.43.0 Marker strips 04.242.3.0 2 Marked 1, 11 20 etc. 991 999 04.842.3.0 2 Marking branch labelled 1, 2, 3... 0 04.841.21.0 2 Single tag, 04.242.08.0 0 Marked 04.842.08.0 0 Adhesive marking strips (1 sheet = strips) 1 04.007.4089.0 1 13 24 04.007.4189.0 1 2 3 04.007.4289.0 1 37 48 04.007.4389.0 1 49 0 04.007.4489.0 1 1 72 04.007.489.0 1 73 84 04.007.489.0 1 8 9 04.007.4789.0 1 97 8 04.007.4889.0 1 Adhesive marking strips (1 sheet = strips) 1 04.007.4089.0 1 13 24 04.007.4189.0 1 2 3 04.007.4289.0 1 37 48 04.007.4389.0 1 49 0 04.007.4489.0 1 1 72 04.007.489.0 1 73 84 04.007.489.0 1 8 9 04.007.4789.0 1 97 8 04.007.4889.0 1 37

wiecon PCB PCB terminal, rising cage clamp system pitch.00/.00 mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded 2 V/4 kv/3 Overvoltage category III *90 V/4 kv/2 Overvoltage category II 0 V/4 kv/1 Overvoltage category I Solder pin 0.8 x 0.9 mm Drill hole Ø 1.2 mm * max. 00 V for non-earthed systems or expected overvoltage 4 kv Rated voltages VDE 01 (pitch mm) UL Data CSA Data Approvals pitch.00 mm pitch.00 mm.8 1.8 20.8 2.8 30.8 3.8 40.8 4.8.8.8 0.8.8 70.8 7.8 80.8 20.8 30.8 40.8.8 0.8 70.8 80.8 90.8.8 1.8 0.8 1 20 2 30 3 40 4 0 70 7 20 30 40 0 70 80 90 1 2 3 4 7 8 9 11 13 14 1 1 17 to 24 pole on request 2 3 4 7 8 9 11 Type 8190 conductor horizontal to PCB No. 22 AWG 300 V 1 A No. 22 14 AWG 300 V A igqwd Box Qty G T Pole Part No. Part No. Pole Part No. Box Qty 2.131.023.0 2.131.033.0 2.131.043.0 2.131.03.0 2.131.03.0 2.131.073.0 2.131.083.0 2.131.093.0 2.131.3.0 2.131.113.0 2.131.3.0 2.131.133.0 2.131.143.0 2.131.13.0 2.131.13.0 2.133.023.0 2.133.033.0 2.133.043.0 2.133.03.0 2.133.03.0 2.133.073.0 2.133.083.0 2.133.093.0 2.133.3.0 2.133.113.0 2.133.3.0 2.130.023.0 2.130.033.0 2.130.043.0 2.130.03.0 2.130.03.0 2.130.073.0 2.130.083.0 2.130.093.0 2.130.3.0 2.130.113.0 2.130.3.0 2.130.133.0 2.130.143.0 2.130.13.0 2.130.13.0 2.132.023.0 2.132.033.0 2.132.043.0 2.132.03.0 2.132.03.0 2.132.073.0 2.132.083.0 2.132.093.0 2.132.3.0 2.132.113.0 2.132.3.0 M 2.. Accessories Type 8190 Test plug nominal current = 2 A 1 Z.43.013.0 2 Z.43.023.0 Marker tag carrier for pole, can be divided for smaller pole numbers 04.242.43.0. Marker strips 04.242.3.0 2. Marked 1, 11 20 etc. 991 999 04.842.3.0 2 Marking branch labelled 1, 2, 3... 0 04.841.21.0 2 Single tag, 04.242.08.0 0 Marked 04.842.08.0 0 Rated voltages (pitch.00 mm): VDE 01 90 V/8 kv/3 Overvoltage category III 0 V/8 kv/2 Overvoltage category II 0 V/8 kv/1 Overvoltage category I Materials Insulating housing: PA /, UL 94-V0 Clamping part: galvanised steel Contact and solder pin: tin plated E-Cu Clamping screw: galvanised steel Adhesive marking strips (1 sheet = strips) 1 04.007.4089.0 1 13 24 04.007.4189.0 1 2 3 04.007.4289.0 1 37 48 04.007.4389.0 1 49 0 04.007.4489.0 1 1 72 04.007.489.0 1 73 84 04.007.489.0 1 8 9 04.007.4789.0 1 97 8 04.007.4889.0 1 38

wiecon PCB terminal, rising cage clamp system pitch 7. mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded 0 V/ kv/3 Overvoltage category III 0 V/ kv/2 Overvoltage category II 0 V/ kv/1 Overvoltage category I Solder pin 0.8 x 0.9 mm Drill hole Ø 1.2 mm M 2.. Rated voltages VDE 01 UL Data CSA Data Approvals pitch 7. mm 1.8 23.3 30.8 38.3 4.8 3.3 0.8 8.3 7.8 83.3 90.8 7. 1.0 22. 30.0 37. 4.0 2. 0.0 7. 7.0 82. 2 3 4 7 8 9 11 Type 8390 conductor horizontal to PCB No. 22 AWG 300 V 1 A No. 22 14 AWG 300 V A igqwd Box Qty G T Pole Part No. Part No. Pole Part No. Box Qty 2.11.023.0 2.11.033.0 2.11.043.0 2.11.03.0 2.11.03.0 2.11.073.0 2.11.083.0 2.11.093.0 2.11.3.0 2.11.113.0 2.11.3.0 2.1.023.0 2.1.033.0 2.1.043.0 2.1.03.0 2.1.03.0 2.1.073.0 2.1.083.0 2.1.093.0 2.1.3.0 2.1.113.0 2.1.3.0 Accessories Type 8390 Test plug nominal current = 2 A 1 Z.43.013.0 2 Z.43.023.0 Materials Insulating housing: PA /, UL 94-V0 Clamping part: galvanised steel Contact and solder pin: tin plated E-Cu Clamping screw: galvanised steel 39

wiecon PCB PCB terminal, rising cage clamp system pitch.00/.08 mm Rated cross section: 1. mm 2 Rated current: A Wire range: 0.14 2. mm 2 single core/ 0.14 1. mm 2 finely stranded 2 V/4 kv/3 Overvoltage category III *90 V/4 kv/2 Overvoltage category II 0 V/4 kv/1 Overvoltage category I without insulating plate with insulating plate, without locating cams Drilling plan for version with locating cams * max. 00 V for non-earthed systems or expected overvoltage 4 kv Rated voltages VDE 01 UL Data CSA Data Approvals pitch.00 mm field-/factory wiring. 1. 20. 2. 30. 3. 40. 4... 0.. 70. 7. 80. 1 20 2 30 3 40 4 0 70 7 2 3 4 7 8 9 11 13 14 1 1 17 to 24 pole on request Type 8134/8234 Conductor at 3 to PCB No. 30 14 AWG 300 V 1/1 A No. 30 14 AWG 300 V 1 A üigqwd Box Qty G T Pole Part No. Part No. Part No. Part No. without insulating plate 2.1.023.0 2.1.033.0 2.1.043.0 2.1.03.0 2.1.03.0 2.1.073.0 2.1.083.0 2.1.093.0 2.1.3.0 2.1.113.0 2.1.3.0 2.1.133.0 2.1.143.0 2.1.13.0 2.1.13.0 M 3 2.0.023.0 2.0.033.0 2.0.043.0 2.0.03.0 2.0.03.0 2.0.073.0 2.0.083.0 2.0.093.0 2.0.3.0 2.0.113.0 2.0.3.0 2.0.133.0 2.0.143.0 2.0.13.0 2.0.13.0 without insulating plate Solder pin 0. x 1.0 mm Drill hole Ø 1.2 mm with insulating plate with locating cams 2.1.23.0 2.1.33.0 with locating cams 2.0.23.0 2.0.33.0 pitch.08 mm.71 1.79 20.87.08.1 1.24 2 3 4 2.3.023.0 2.3.033.0 2.3.043.0 2.2.023.0 2.2.033.0 2.2.043.0 2.3.23.0 2.3.33.0 2.2.23.0 2.2.33.0 2.9 31.03 3.11 20.32 2.40 30.48 7 2.3.03.0 2.3.03.0 2.3.073.0 2.2.03.0 2.2.03.0 2.2.073.0 41.19 4.27 1.3 3. 40.4 4.72 8 9 2.3.083.0 2.3.093.0 2.3.3.0 2.2.083.0 2.2.093.0 2.2.3.0.42 1.1.9.80.88 0.9 11 13 2.3.113.0 2.3.3.0 2.3.133.0 2.2.113.0 2.2.3.0 2.2.133.0 71.7 7.7 81.83.04 71. 7.20 14 1 1 2.3.143.0 2.3.13.0 2.3.13.0 2.2.143.0 2.2.13.0 2.2.13.0 17 to 24 pole on request 30

wiecon Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: nickel plated brass Contact and solder pin: tin-plated bronze Clamping screw: galvanised steel Part No. with insulating plate without locating cams on request Part No. with insulating plate with locating cams on request on request on request 31

wiecon PCB PCB terminal, rising cage clamp system pitch.00/.08 mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded 2 V/4 kv/3 Overvoltage category III *90 V/4 kv/2 Overvoltage category II 0 V/4 kv/1 Overvoltage category I without insulating plate with insulating plate, without locating cams Drilling plan for version with locating cams * max. 00 V for non-earthed systems or expected overvoltage 4 kv Rated voltages VDE 01 UL Data CSA Data Approvals pitch.00 mm pitch.08 mm field-/factory wiring.8 1.8 20.8 2.8 30.8 3.8 40.8 4.8.8.8 0.8.8 70.8 7.8 80.8 11.01 1.09 21.17 2.2 31.33 3.41 41.49 4.7 1..73 1.81.89 71.97 77.0 82.13 1 20 2 30 3 40 4 0 70 7.08.1 1.24 20.32 2.40 30.48 3. 40.4 4.72.80.88 0.9.04 71. 7.20 2 3 4 7 8 9 11 13 14 1 1 2 3 4 7 8 9 11 13 14 1 1 No. 22 AWG 300 V 20/30 A No. 22 AWG 300 V 2 A üizqwd Box Qty G T Pole Part No. Part No. Part No. Part No. 17 to 24 pole on request 17 to 24 pole on request Type 813/823 Conductor at 3 to PCB without insulating plate 2.21.023.0 2.21.033.0 2.21.043.0 2.21.03.0 2.21.03.0 2.21.073.0 2.21.083.0 2.21.093.0 2.21.3.0 2.21.113.0 2.21.3.0 2.21.133.0 2.21.143.0 2.21.13.0 2.21.13.0 2.23.023.0 2.23.033.0 2.23.043.0 2.23.03.0 2.23.03.0 2.23.073.0 2.23.083.0 2.23.093.0 2.23.3.0 2.23.113.0 2.23.3.0 2.23.133.0 2.23.143.0 2.23.13.0 2.23.13.0 M 3 2.20.023.0 2.20.033.0 2.20.043.0 2.20.03.0 2.20.03.0 2.20.073.0 2.20.083.0 2.20.093.0 2.20.3.0 2.20.113.0 2.20.3.0 2.20.133.0 2.20.143.0 2.20.13.0 2.20.13.0 2.22.023.0 2.22.033.0 2.22.043.0 2.22.03.0 2.22.03.0 2.22.073.0 2.22.083.0 2.22.093.0 2.22.3.0 2.22.113.0 2.22.3.0 2.22.133.0 2.22.143.0 2.22.13.0 2.22.13.0. without insulating plate Solder pin 0.9 x 0.9 mm Drill hole Ø 1.3 mm with insulating plate with locating cams 2.21.23.0 2.21.33.0 2.23.23.0 2.23.33.0 with insulating plate with locating cams 2.20.23.0 2.20.33.0 2.22.23.0 2.22.33.0 32

wiecon with insulating plate, with locating cams Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: nickel plated brass Contact and solder pin: tin plated E-Cu Clamping screw: galvanised steel Part No. with insulating plate without locating cams on request Part No. with insulating plate without locating cams on request on request on request 33

wiecon PCB PCB terminal, rising cage clamp system pitch.00/.08 mm Rated cross section: 1. mm 2 Rated current: A Wire range: 0.14 2. mm 2 single core/ 0.14 1. mm 2 finely stranded without insulating plate with insulating plate, without locating cams 2 V/4 kv/3 Overvoltage category III *90 V/4 kv/2 Overvoltage category II 0 V/4 kv/1 Overvoltage category I * max. 00 V for non-earthed systems or expected overvoltage 4 kv Rated voltages VDE 01 UL Data CSA Data Approvals pitch.00 mm field-/factory wiring 13.0 18.0 23.0 28.0 33.0 38.0 43.0 48.0 3.0 8.0 3.0 1 20 2 30 3 40 4 4 8 14 1 18 20 22 24 Type 8192 E/8292 E conductor horizontal to PCB No. 30 14 AWG 300 V 1/1 A No. 30 14 AWG 300 V 1 A üigqwd Box Qty G T Pole Part No. Part No. Part No. Part No. without insulating plate 2.198.23.0 2.198.33.0 2.198.43.0 2.198.3.0 2.198.3.0 2.198.73.0 2.198.83.0 2.198.93.0 2.198.03.0 2.198.13.0 2.198.23.0 M 3 2.198.023.0 2.198.033.0 2.198.043.0 2.198.03.0 2.198.03.0 2.198.073.0 2.198.083.0 2.198.093.0 2.198.3.0 2.198.113.0 2.198.3.0 without insulating plate Solder pin 0. x 1.0 mm Drill hole Ø 1.2 mm with insulating plate with locating cams 2.198.923.0 2.198.933.0 with insulating plate with locating cams 2.198.423.0 2.198.433.0 pitch.08 mm 13.2 18.33 23.41.08.1 1.24 4 8 2.199.23.0 2.199.33.0 2.199.43.0 2.199.023.0 2.199.033.0 2.199.043.0 2.199.923.0 2.199.933.0 2.199.423.0 2.199.433.0 28.49 33.7 38. 20.32 2.40 30.48 14 2.199.3.0 2.199.3.0 2.199.73.0 2.199.03.0 2.199.03.0 2.199.073.0 43.73 48.81 3.89 3. 40.4 4.72 1 18 20 2.199.83.0 2.199.93.0 2.199.03.0 2.199.083.0 2.199.093.0 2.199.3.0 8.97 4.0.80.88 22 24 2.199.13.0 2.199.23.0 2.199.113.0 2.199.3.0 34

wiecon with insulating plate, with locating cams Drilling plan for version with locating cams Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: nickel plated brass Contact and solder pin: tin-plated bronze Clamping screw: galvanised steel Part No. with insulating plate without locating cams on request Part No. with insulating plate without locating cams on request on request on request 3

wiecon PCB PCB terminal, rising cage clamp system pitch.00/.08 mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded without insulating plate with insulating plate, without locating cams 2 V/4 kv/3 Overvoltage category III *90 V/4 kv/2 Overvoltage category II 0 V/4 kv/1 Overvoltage category I Solder pin 0.9 x 0.9 mm Drill hole Ø 1.3 mm M 3. * max. 00 V for non-earthed systems or expected overvoltage 4 kv Rated voltages VDE 01 UL Data CSA Data Approvals pitch.00 mm field-/factory wiring 13.0 18.0 23.0 28.0 33.0 38.0 43.0 48.0 3.0 8.0 3.0 1 20 2 30 3 40 4 4 8 14 1 18 20 22 24 Type 8191 E/8291 E conductor horizontal to PCB No. 22 AWG 300 V 20/30 A No. 22 AWG 300 V 2 A üizqwd Box Qty G T Pole Part No. Part No. Part No. Part No. without insulating plate 2.178.23.0 2.178.33.0 2.178.43.0 2.178.3.0 2.178.3.0 2.178.73.0 2.178.83.0 2.178.93.0 2.178.03.0 2.178.13.0 2.178.23.0 without insulating plate 2.178.023.0 2.178.033.0 2.178.043.0 2.178.03.0 2.178.03.0 2.178.073.0 2.178.083.0 2.178.093.0 2.178.3.0 2.178.113.0 2.178.3.0 with insulating plate with locating cams 2.178.923.0 2.178.933.0 with insulating plate with locating cams 2.178.423.0 2.178.433.0 pitch.08 mm 13.2 18.33 23.41.08.1 1.24 4 8 2.179.23.0 2.179.33.0 2.179.43.0 2.179.023.0 2.179.033.0 2.179.043.0 2.179.923.0 2.179.933.0 2.179.423.0 2.179.433.0 28.49 33.7 38. 20.32 2.40 30.48 14 2.179.3.0 2.179.3.0 2.179.73.0 2.179.03.0 2.179.03.0 2.179.073.0 43.73 48.81 3.89 3. 40.4 4.72 1 18 20 2.179.83.0 2.179.93.0 2.179.03.0 2.179.083.0 2.179.093.0 2.179.3.0 8.97 4.0.80.88 22 24 2.179.13.0 2.179.23.0 2.179.113.0 2.179.3.0 3

wiecon with insulating plate, with locating cams Drilling plan for version with locating cams Materials Insulating housing: PA / grey, UL 94-V2 Clamping part: nickel plated brass Contact and solder pin: tin plated E-Cu Clamping screw: galvanised steel Part No. with insulating plate without locating cams on request Part No. with insulating plate without locating cams on request on request on request 37

wiecon PCB PCB terminal, rising cage clamp system pitch.00 mm Rated cross section: 2. mm 2 Rated current: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded 2 V/4 kv/3 Overvoltage category III *90 V/4 kv/2 Overvoltage category II 0 V/4 kv/1 Overvoltage category I Solder pin 0.8 x 0.9 mm Drill hole Ø 1.2 mm * max. 00 V for non-earthed systems or expected overvoltage 4 kv Rated voltages VDE 01 UL Data CSA Data Approvals pitch.00 mm 13.3 18.3 23.3 28.3 33.3 38.3 43.3 48.3 3.3 8.3 3.3 1 20 2 30 3 40 4 4 8 14 1 18 20 22 24 Type 8190 E conductor horizontal to PCB No. 22 AWG 300 V 1 A No. 22 14 AWG 300 V A igqwd Box Qty G T Pole Part No. Part No. Pole Part No. Box Qty 2.131.323.0 2.131.333.0 2.131.343.0 2.131.33.0 2.131.33.0 2.131.373.0 2.131.383.0 2.131.393.0 2.131.403.0 2.131.413.0 2.131.423.0 2.130.323.0 2.130.333.0 2.130.343.0 2.130.33.0 2.130.33.0 2.130.373.0 2.130.383.0 2.130.393.0 2.130.403.0 2.130.413.0 2.130.423.0 M 2,. Accessories Type 8190 E Test plug nominal current = 2 A 1 Z.43.013.0 2 Z.43.023.0 Marker tag carrier for pole, can be divided for smaller pole numbers 04.242.43.0. Marker strips 04.242.3.0 2 Marked 1, 11 20 etc. 991 999 04.842.3.0 2 Marking branch labelled 1, 2, 3... 0 04.841.21.0 2 Single tag, 04.242.08.0 0 Marked 04.842.08.0 0 Materials Insulating housing: PA /, UL 94-V0 Clamping part: galvanised steel Contact and solder pin: tin plated E-Cu Clamping screw: galvanised steel Adhesive marking strips (1 sheet = strips) 1 04.007.4089.0 1 13 24 04.007.4189.0 1 2 3 04.007.4289.0 1 37 48 04.007.4389.0 1 49 0 04.007.4489.0 1 1 72 04.007.489.0 1 73 84 04.007.489.0 1 8 9 04.007.4789.0 1 97 8 04.007.4889.0 1 38

wiecon 39

wiecon PCB PCB terminal, rising cage clamp system pitch.00/.08 mm Rated cross section: 2. mm 2 without insulating plate Rated current: 1 A Wire range: 0,14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded 2 V/4 kv/3 Overvoltage category III *90 V/4 kv/2 Overvoltage category II 0 V/4 kv/1 Overvoltage category I Solder pin 0.9 x 0.9 mm Drill hole Ø 1.3 mm * max. 00 V for non-earthed systems or expected overvoltage 4 kv Rated voltages VDE 01 UL Data CSA Data Approvals pitch.00 mm 20 20 20 field-/factory wiring.8 17.8 22.8 27.8 32.8 37.8 42.8 47.8 2.8 7.8 2.8 1 20 2 30 3 40 4 9 1 18 21 24 27 30 33 3 Type 8191 D/8291 D conductor horizontal to PCB No. 22 AWG 300 V 20/30 A No. 22 AWG 300 V 2 A üizqwd Box Qty G T Pole Part No. Part No. Part No. Part No. without insulating plate 2.180.23.0 2.180.33.0 2.180.43.0 2.180.3.0 2.180.3.0 2.180.73.0 2.180.83.0 2.180.93.0 2.180.03.0 2.180.13.0 2.180.23.0 M 3 2.180.023.0 2.180.033.0 2.180.043.0 2.180.03.0 2.180.03.0 2.180.073.0 2.180.083.0 2.180.093.0 2.180.3.0 2.180.113.0 2.180.3.0. without insulating plate with insulating plate with locating cams 2.180.923.0 2.180.933.0 Marked with insulating plate with locating cams 2.180.423.0 2.180.433.0 pitch.08 mm.70 17.78 22.8.08.1 1.24 9 2.181.23.0 2.181.33.0 2.181.43.0 2.181.023.0 2.181.033.0 2.181.043.0 2.181.923.0 2.181.933.0 2.181.423.0 2.181.433.0 27.94 33.02 38. 20.32 2.40 30.48 1 18 21 2.181.3.0 2.181.3.0 2.181.73.0 2.181.03.0 2.181.03.0 2.181.073.0 20 43.18 48.2 3.34 3. 40.4 4.72 24 27 30 2.181.83.0 2.181.93.0 2.181.03.0 2.181.083.0 2.181.093.0 2.181.3.0 20 20 8.42 3..80.88 33 3 2.181.13.0 2.181.23.0 2.181.113.0 2.181.3.0 370

wiecon with insulating plate, without locating cams with insulating plate, with locating cams Drilling plan for version with locating cams Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: nickel plated brass Contact and solder pin: tin plated E-Cu Clamping screw: galvanised steel Part No. with insulating plate without locating cams on request Part No. with insulating plate without locating cams on request on request on request 371

wiecon PCB PCB terminal, rising cage clamp system pitch.00 mm Rated cross section: 1. mm 2, earth 2. mm 2 Rated current: A Wire range: 0. 2. mm 2 single core 0. 4.0 mm 2 (earth) 0. 1. mm 2 finely stranded 0. 2. mm 2 (earth) 2 V/4 kv/3 Overvoltage category III *90 V/4 kv/2 Overvoltage category II 0 V/4 kv/1 Overvoltage category I * max. 00 V for non-earthed systems or expected overvoltage 4 kv Rated voltages VDE 01 UL Data CSA Data Approvals pitch.00 mm field-/factory wiring 1. mm 2 1. mm 2 2. mm 2. Type 819 D/... conductor horizontal to PCB No. 30 14 AWG 300 V A No. 20 AWG for PE No. 30 14 AWG 300 V A No. 20 AWG for PE qw Box Qty G T Pole Part No. Part No. Solder pin 0. x 1.0 mm Drill hole Ø 1.2 mm M 3 Materials Type 819 D/... and Type 819 V/... Insulating housing: PA /, UL 94-V0 Clamping part: nickel plated brass Contact and solder pin: tinned Clamping screw: galvanised steel. 17. 7.. 9 2.13.223.0 2.13.233.0 2.13.023.0 2.13.033.0 22. 27. 32. 17. 22. 27. 1 18 2.13.243.0 2.13.23.0 2.13.23.0 2.13.043.0 2.13.03.0 2.13.03.0 20 37. 42. 47. 32. 37. 42. 21 24 27 2.13.273.0 2.13.283.0 2.13.293.0 2.13.073.0 2.13.083.0 2.13.093.0 20 2. 47. 30 33 to 0 pole on request 2.13.303.0 2.13.3.0 Sensor terminals pitch.00 mm jumpered Type 819 D/... VB1 20 2 PE + 4 3 PE + 4 PE + 8 PE + PE + 7 PE + 14 8 PE + 1 9 PE + 18 PE + 20 11 earth + 33 up to 20 earth + 0 on request 2.13.23.0 2.13.33.0 2.13.43.0 2.13.3.0 2.13.3.0 2.13.73.0 2.13.83.0 2.13.93.0 2.13.703.0 2.13.423.0 2.13.433.0 2.13.443.0 2.13.43.0 2.13.43.0 2.13.473.0 2.13.483.0 2.13.493.0 2.13.3.0 372

wiecon Rated cross section: 1. mm 2, earth 2. mm 2 Rated current: A Wire range: 0. 2. mm 2 single core 0. 4.0 mm 2 (earth) 0. 1. mm 2 finely stranded 0. 2. mm 2 (earth) 2 V/4 kv/3 Overvoltage category III *90 V/4 kv/2 Overvoltage category II 0 V/4 kv/1 Overvoltage category I 1. mm 2 1. mm 2 Solder pin 0. x 1.0 mm Drill hole Ø 1.2 mm * max. 00 V for non-earthed systems or expected overvoltage 4 kv Rated voltages VDE 01 UL Data CSA Data Approvals pitch.00 mm field-/factory wiring 1. mm 2 2. mm 2 Type 819 V/... conductor horizontal to PCB No. 30 14 AWG 300 V A No. 20 AWG for PE No. 30 14 AWG 300 V A No. 20 AWG for PE qw Box Qty G T Pole Part No. Part No. M 3. 17. 7.. 8 2.14.223.0 2.14.233.0 2.14.023.0 2.14.033.0 22. 27. 32. 17. 22. 27. 1 20 24 2.14.243.0 2.14.23.0 2.14.23.0 2.14.043.0 2.14.03.0 2.14.03.0 20 37. 42. 47. 32. 37. 42. 28 32 3 2.14.273.0 2.14.283.0 2.14.293.0 2.14.073.0 2.14.083.0 2.14.093.0 20 2. 47. 40 44 to 80 pole on request 2.14.303.0 2.14.3.0 Sensor terminals pitch.00 mm jumpered 2 PE + 3 PE + 9 Type 819 V/... VB1 2.14.23.0 2.14.33.0 2.14.423.0 2.14.433.0 Drilling plan Type 819 D/... and Type 819 V/... 4 PE + PE + 1 PE + 18 2.14.43.0 2.14.3.0 2.14.3.0 2.14.443.0 2.14.43.0 2.14.43.0 7 PE + 21 8 PE + 24 9 PE + 27 2.14.73.0 2.14.83.0 2.14.93.0 2.14.473.0 2.14.483.0 2.14.493.0 20 PE + 30 11 earth + 33 to 20 earth + 0 on request 2.14.703.0 2.14.3.0 373

wiecon PCB PCB terminal, rising cage clamp system pitch 7. mm Rated cross section: 4.0 mm 2 Rated current: 30 A Wire range: 0.14.0 mm 2 single core/ 0.14 4.0 mm 2 finely stranded Materials Insulating housing: PA / grey, UL 94-V0 Clamping part: galvanised steel Contact and solder pin: tin plated E-Cu Clamping screw: galvanised steel Rated voltages pitch7. mm 0 V/ kv/3 Overvoltage category III 0 V/ kv/2 Overvoltage category II 0 V/ kv/1 Overvoltage category I pitch.00 mm, UL 00 V, CSA 00 V 90 V/8 kv/3 Overvoltage category III 0 V/8 kv/2 Overvoltage category II 0 V/8 kv/1 Overvoltage category I M 3 9 Solder pin 0.8 x 1.0 mm Drill hole Ø 1.3 mm Rated voltages VDE 01 UL Data CSA Data Approvals pitch 7. mm Individual poles connected in series field-/factory wiring 1 pole Type 837 conductor horizontal to PCB No. 22/30 AWG 300 V 30/3 A No. 22 AWG 300 V 30 A izrqwd Type Part No. Box Qty 837 2.700.013.0 Accessories pitch.00 mm Pitch intermediate plate (increases pitch from 7. to.00 mm) Test plug red Marking strips 1, 11 20 etc. 991 999 1) Marking branch labelled 1, 2, 3... 0 Single tag 1) 1) Labelling on request ST 2/2,3 970 A/7,/ 970 A/7,/ B 9704 A/1-0 B 970 A 970 AB 07.300.273.0 Z.3.2921.0 04.242.73.0 04.842.73.0 04.841.21.0 04.242.08.0 04.842.08.0 2 2 2 0 0 374

wiecon Rated cross section:.0 mm 2 Rated current: 9 A (based on ambient temperature 20 C rated cross section and max. number of poles) G T 32 Wire range: 0..0 mm 2 single core and finely stranded 19 400 V/ kv/3 Overvoltage category III 90 V/ kv/2 Overvoltage category II 0 V/ kv/1 Overvoltage category I,1 4, 20,32 Solder pin 1.2 x 1.4 mm Drill hole Ø 1. mm M 4 Rated voltages VDE 01 UL Data CSA Data Approvals pitch.1 mm field-/factory wiring.1 30.48 40.4 20.32 30.48 1 3 4 No. 22 8 AWG 300 V A No. 22 8 AWG 300 V A qw Box Qty G T Pole Part No. Type 773 L2.../W 27.002.13.0 27.002.33.0 27.002.43.0 37

wiecon PCB PCB terminal, rising cage clamp system pitch.1 mm Rated cross section: mm 2 G T 18,3 G T Rated current: 7 A (based on ambient 20 C, rated cross section and max. number of poles) 28, 28, Wire range: 0. 1.0 mm 2 single core/ 0..0 mm 2 finely stranded,1 4,,1 18,3 4, Rated voltages 4 solder pins 2 V/4 kv/3 Overvoltage category III 400 V/4 kv/2 Overvoltage category III 30 V/4 kv/2 Overvoltage category II 2 solder pins 30 V/8 kv/3 Overvoltage category III 800 V/8 kv/2 Overvoltage category III 0 V/8 kv/2 Overvoltage category II Solder pin 1.2 x 1.2 mm Drill hole Ø 1. mm 4 solder pins M 4 Solder pin 1.2 x 1.2 mm Drill hole Ø 1. mm 2 solder pins M 4 Rated voltages VDE 01 UL Data CSA Data Approvals field-/factory wiring 20.32 30.48.1 20.32 2 3 Type 772 L4 No. 22 8 AWG 300/1 V /40 A No. 22 8 AWG 300 V A qw 27.002.023.0 27.002.033.0 Type 772 L2 No. 22 8 AWG 300/1 V /40 A No. 22 8 AWG 300 V A qw Box Qty G T Pole Part No. Part No. pitch.1 mm 27.002.223.0 27.002.233.0 37

wiecon Rated cross section: mm 2 G T 18,3 Rated current: 7 A (based on ambient temperature 20 C rated cross section and max. number of poles) Wire range: 0. 1.0 mm 2 single core/ 0..0 mm 2 finely stranded Rated voltages 0 V/8 kv/3 Overvoltage category III 20,32 Solder pin 1.2 x 1.2 mm Drill hole Ø 1. mm M 4 4, 28, Rated voltages VDE 01 Type 772 L2 Approvals pitch 20.32 mm 30.48.4 20.32 40.48 2 3 No. 22 AWG 00 V 0 A qw Box Qty G T Pole Part No. 27.002.423.0 27.002.433.0 377

wiecon PCB PCB terminal, rising cage clamp system pitch.08 mm Rated cross section: 4.0 mm 2 single core/ 2. mm 2 finely stranded Rated current Type 827: 2 A Rated current Type 827 TKS: 1 A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded 2 V/4 kv/3 Overvoltage category III 400 V/4 kv/2 Overvoltage category II 0 V/4 kv/1 Overvoltage category I Solder pin 0.8 x 1.1 mm Drill hole Ø 1.4 mm M 3 Solder pin 0.8 x 1.1 mm Drill hole Ø 1.4 mm M 3 Rated voltages VDE 01 UL Data CSA Data Approvals pitch.08 mm Individual poles connected in series field-/factory wiring 1 pole Type 827 modular terminal No. 30 14 AWG 300 V 1/23 A No. 30 14 AWG 300 V 20 A qw Type 827 TKS disconnect terminal No. 30 14 AWG 300 V 1 A No. 30 14 AWG 300 V 1 A qw Type Part No. Box Qty Type Part No. Box Qty 827 2.720.133.0 827 TKS 2.720.143.0 Pole numbers latched together on request Accessories Adhesive marking strips 1 04.007.4089.0 1 13 24 04.007.4189.0 1 2 3 04.007.4289.0 1 37 48 04.007.4389.0 1 49 0 04.007.4489.0 1 1 72 04.007.489.0 1 73 84 04.007.489.0 1 8 9 04.007.4789.0 1 97 8 04.007.4889.0 1 1 04.007.4089.0 1 13 24 04.007.4189.0 1 2 3 04.007.4289.0 1 37 48 04.007.4389.0 1 49 0 04.007.4489.0 1 1 72 04.007.489.0 1 73 84 04.007.489.0 1 8 9 04.007.4789.0 1 97 8 04.007.4889.0 1 Test plug red ST 2/2,3 Z.3.2921.0 ST 2/2,3 Z.3.2921.0 Materials Type 827 Insulating housing: PA / grey, UL 94-V0 Clamping part: nickel plated brass Contact and solder pin: tin plated E-Cu Clamping screw: galvanised steel Materials Type 827 TKS Insulating housing: PA / grey, UL 94-V0 Disconnect component: PA / orange, UL 94-V-0 Clamping part: nickel plated brass Contact spring and solder pin: special copper alloy, tin plated Clamping screw: galvanised steel Isolating blade: tin plated E-Cu 378

wiecon PCB terminal, rising cage clamp system pitch.08 mm Rated cross section: 2. mm 2 Rated current:.3 A** Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded 2 V/4 kv/3 Overvoltage category III *90 V/4 kv/2 Overvoltage category II 0 V/4 kv/1 Overvoltage category I * max. 00 V for non-earthed systems or expected overvoltage 4 kv ** voltage and current are determined by the fuse link used.3 A up to a power loss of 1. W IEC 0 7-2/ DIN VDE 0820 T2 should be observed when selecting and using fuse link DIN VDE 0820 T2 Solder pin 0.8 x 1.1 mm and 0. x 1.1 mm Drill hole Ø 1.4 mm M 3 Rated voltages VDE 01 UL Data CSA Data Approvals pitch.08 mm Individual poles connected in series 1 pole Type 827 Si-D modular fuse terminal (for Si x 20) No. 30 14 AWG 300 V.3 A No. 30 14 AWG 300 V.3 A qw Type Part No. Box Qty 827 Si-D 2.720.13.0 Pole numbers latched together on request Accessories Adhesive marking strips 1 04.007.4089.0 1 13 24 04.007.4189.0 1 2 3 04.007.4289.0 1 37 48 04.007.4389.0 1 49 0 04.007.4489.0 1 1 72 04.007.489.0 1 73 84 04.007.489.0 1 8 9 04.007.4789.0 1 97 8 04.007.4889.0 1 Un for customised labelling Test plug red ST 2/2,3 04.007.3989.0 1 Z.3.2921.0 Materials Type 827 Si-D Insulating housing: PA / grey, UL 94-V0 Fuse holder: PA / orange, UL 94-V0 Clamping part: nickel plated brass Contact and solder pin: special copper alloy, tin plated Contact spring and solder pin: special copper alloy, tin plated Clamping screw: galvanised steel 379

wiecon PCB Type 8 B, RAST Technology, PCB plug-in terminal, tab connector Technical progress has probably seen the fastest advances in recent times in areas of electronics. Devices have become more sophisticated, requiring large numbers of components for functionality. To make them work together, printed circuit boards are used. For fitting these, Wieland Electric offer plug-in printed circuit board screw terminals with a RAST system which, combined with the corresponding tab connectors can be connected indirectly. Fixed coding (without coding strip of type 8) is designed in accordance with the RAST standard and corresponds to all known requirements that have been drawn up for white goods. The same also applies to the standard variants that, apart from being connected horizontally, can also be connected vertically left and right or as tab connectors in a straight line. They are all based on a rated current of A. The range extends from 2 7 poles. The conductor connection can be carried out with finely stranded 0.14 mm 2 2. mm 2, with or without ferrules, and as a single-core from 0.14 mm 2 4 mm 2. 380

wiecon Page 382 Page 382 Page 383 Page 383 Page 383 Type 8 8 8 8 8 B/... C... B/...C...VR B/...C...VL F/...GC... F/WC... pitch mm.00.00.00.00.00 cross section mm 2 2. 2. 2. pole 2 7 2 7 2 7 2 7 2 7 RAST coding diagram Positioning Coding Latching 381

wiecon PCB RAST pluggable PCB terminal, pitch.00 mm Rated cross section: 2. mm 2 Rated current: A Wire range: 0.20 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I M 3 7.0 M 3 7.0 Type 8 B/... C... OB Type 8 B/... C... VR OB Rated voltages VDE 01 UL Data CSA Data Approvals No. 2 AWG 300 V A No. 2 AWG 300 V A ük No. 2 AWG 300 V A No. 2 AWG 300 V A ük Box Qty Poles Coding Part No. Part No. pluggable PCB terminal/header 2 C0 C1 C2 C3 C4 C C C7 1.000.023.0 1.001.023.0 1.002.023.0 1.003.023.0 1.004.023.0 1.00.023.0 1.00.023.0 1.007.023.0 1.020.023.0 1.021.023.0 1.022.023.0 1.023.023.0 1.024.023.0 1.02.023.0 1.02.023.0 1.027.023.0 3 C0 C1 C2 1.000.033.0 1.001.033.0 1.002.033.0 1.020.033.0 1.021.033.0 1.022.033.0 C3 C4 C 1.003.033.0 1.004.033.0 1.00.033.0 1.023.033.0 1.024.033.0 1.02.033.0 C C7 1.00.033.0 1.007.033.0 1.02.033.0 1.027.033.0 4 C0 C1 C2 1.000.043.0 1.001.043.0 1.002.043.0 1.020.043.0 1.021.043.0 1.022.043.0 C3 C4 C 1.003.043.0 1.004.043.0 1.00.043.0 1.023.043.0 1.024.043.0 1.02.043.0 C 1.00.043.0 1.02.043.0 C0 C1 C2 1.000.03.0 1.001.03.0 1.002.03.0 1.020.03.0 1.021.03.0 1.022.03.0 C0 C1 C2 1.000.03.0 1.001.03.0 1.002.03.0 1.020.03.0 1.021.03.0 1.022.03.0 7 C0 C1 C2 1.000.073.0 1.001.073.0 1.002.073.0 1.020.073.0 1.021.073.0 1.022.073.0 382

wiecon RAST PCB header Drilling hole, component size M 3 7.0 Positioning pins are omitted from design 8 F/... WC...OB Type 8 B/... C... VL OB Type 8 F/... GC... OB / 8 F/... WC... OB No. 2 AWG 300 V A No. 2 AWG 300 V A ük 1.0.023.0 1.011.023.0 1.0.023.0 1.013.023.0 1.014.023.0 1.01.023.0 1.01.023.0 1.017.023.0 Rated voltages VDE 01 UL Data CSA Data Approvals 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 No. 2 AWG 300 V A No. 2 AWG 300 V A Part No. Box Qty G1 G2 G3 T Part No. Part No. RAST ü 1.301.028.9 1.302.028.9 1.303.028.9 1.304.028.9 1.30.028.9 1.30.028.9 1.307.028.9 1.311.028.9 1.3.028.9 1.313.028.9 1.314.028.9 1.31.028.9 1.31.028.9 1.317.028.9 1.0.033.0 1.011.033.0 1.0.033.0 1 1 1 1.8 1.8 1.8 17 17 1.301.038.9 1.302.038.9 1.311.038.9 1.3.038.9 1.013.033.0 1.014.033.0 1.01.033.0 1 1 1 1.8 1.8 1.8 17 17 17 1.303.038.9 1.304.038.9 1.30.038.9 1.313.038.9 1.314.038.9 1.31.038.9 1.01.033.0 1.017.033.0 1 1 1.8 1.8 17 17 1.30.038.9 1.307.038.9 1.31.038.9 1.317.038.9 1.0.043.0 1.011.043.0 1.0.043.0 20 20 20 21.8 21.8 21.8 22 22 1 1 1 1.301.048.9 1.302.048.9 1.311.048.9 1.3.048.9 1.013.043.0 1.014.043.0 1.01.043.0 20 20 20 21.8 21.8 21.8 22 22 22 1 1 1 1.303.048.9 1.304.048.9 1.30.048.9 1.313.048.9 1.314.048.9 1.31.048.9 1.01.043.0 20 21.8 22 1 1.30.048.9 1.31.048.9 1.0.03.0 1.011.03.0 1.0.03.0 2 2 2 2.8 2.8 2.8 27 27 20 20 20 1.301.08.9 1.302.08.9 1.311.08.9 1.3.08.9 1.0.03.0 1.011.03.0 1.0.03.0 30 30 30 31.8 31.8 31.8 32 32 2 2 2 1.301.08.9 1.302.08.9 1.311.08.9 1.3.08.9 1.0.073.0 1.011.073.0 1.0.073.0 3 3 3 3.8 3.8 3.8 37 37 30 30 30 1.301.078.9 1.302.078.9 1.311.078.9 1.3.078.9 383

wiecon PCB RAST technology Equipotential distribution board for PCB, pitch.00 mm Customer specific connection modules with RAST technology Main area of application: RAST technology: White and Brown goods Main benefits of RAST : fixed integrated coding incorrect connections are not possible variety of colours available (benefit: immediate assignment of socket and plug component optimum for on-site installations Wieland offers customer specific modifications e.g. single part RAST connection modules integrated jumper rail (e.g. earth conductor) socket and plug components in the connection module for potential distribution (guideline: socket must always be the conducting component) any combination of plugs/sockets with variable number of poles variety of colours 384

wiecon Rated cross section: 2. mm 2 Rated current: A Wire range: 0.14 4.0 mm 2 single core/ 0.14 2. mm 2 finely stranded 2 V/2. kv/3 overvoltage category III *90 V/2. kv/2 overvoltage category II 0 V/2. kv/1 overvoltage category I No. of poles: 2 7 * max. 00 V for non-earthed systems or expected overvoltage 4 kv Type 8 BF/3/4 plug component socket component Rated voltages VDE 01 UL Data CSA Data pending Approvals pitch.00 mm ük Type Part No. Box Qty Type Part No. Box Qty 99.243.34.7 plug component with strain relief, 99.239.34.7 white socket component 99.29.34.7 with strain relief, green 38

wiecon TER Termination modules TM / TM Termination modules in RAST technology (IP 4) for series installation The time consuming task of feeding through various external cables into the control cabinet has come to an end. With its termination module, Wieland has developed a cost effective and simple wiring method for modular installation. Modular RAST control cabinet glanding with secure connection. The principal aim is to optimise production of multiple installations with this wiring system by using cable assemblies with coded plugs. External wiring A % testing of the cables and coding enables production that saves both time and costs. Benefits compared to the conventional screw gland: installation time reduced by up to 80 % compared to conventional methods time and cost savings due to preassembled cables glanding with IP 4 protection error rate is zero as it is impossible to make a wrong connection specialist personnel are not required to connect the external wiring Internal wiring 38

wiecon The external RAST connectors are available as 3 to pole and prevent any errors during connection due to the secure coding system. The fixing of labels ensures that each plug can be rapidly assigned to the respective socket for modules with higher pole numbers. The external connecting cables with special plugs which provide insulation with protection type IP 4, are supplied as prefabricated with the cable types required by the customer. There is also the possibility of attaching further components to the other end of the cable such as outlet boxes e.g. temperature transducers. The internal wiring is carried out either using cables with insulated RAST push-on blade RAST screwed bush RAST crimp connector System configuration There are 2 basic modules Module with slots = TM Module with slots = TM TM The TM module has the following variants slots 3 pole = Type TM -3 slots 4 pole = Type TM -4 slots pole = Type TM - All these types are coded to ensure a reliable connection i.e. there are no identical slots within a moduleand there are 2 variants of each type. Cable types of external cables The following standard cable types are available: Ölflex Quattro 1 in the pole numbers 3/4/ pole Ölflex quattro 1 CY (shield version) in the pole numbers 3/4/ pole The quantity of possible combinations of modules, codes and cables makes it possible to implement a variety of customer-specific wiring solutions. Special module variants and cables are also possible. To test the variety of possible variations, it is possible to order the function set TM - with cables. Technical data of the TM modules and external cables Wire range: 1. mm 2 (Standard) Rated voltage: 2 V/4 kv/3 overvoltage category III Rated current intensity: A Approvals in preparation: UL, CSA and VDE Application of the TM Module / in the control cabinet Switchgear TM The TM module has the following variants slots in two rows of Cable assemblies 3 pole / 3 pole = Type TM -33 3 pole / 4 pole = Type TM -34 Switchgear 4 pole / 4 pole = Type TM -44 3 pole / pole = Type TM -3 Exterior wall Modular terminals Modular terminals 387

wiecon TER Function set TM Function set, consisting of 1 x TM - including cable set x m Ölflex Quattro cable x 1. mm 2 with a pole plug in the blade version slots 3 pole = Type TM -3 slots 4 pole = Type TM -4 Type TM - F Type TM -3 Type TM -4 Type Part No. Box Qty Type Part No. Box Qty Type Part No. Box Qty TM - F 99.483.0000.0 on request TM -3 auf Anfrage TM -4 coding on request coding on request on request Drill hole D = 3.8 for self tapping screw 0.084.02.0 3 41, Overall dimensions, steel cutout and drill hole configuration are identical for all TM variants 388

wiecon slots pole = Type TM - Type TM - TM Cover suitable for all pole combinations Sealing plug Type Part No. Box Qty Type Part No. Box Qty Type Part No. Box Qty TM - coding on request on request TM -X 1.800.99.0 3 pole 4 pole pole 0.2.97.1 0.2.7.1 0.2.827.1 389

wiecon TER Function set TM slots in two rows of 3 pole/3 pole = Type TM -33 slots in two rows of 3 pole/4 pole = Type TM -34 slots in two rows of 4 pole/4 pole = Type TM -44 Type TM -33 Type TM -34 Type TM -44 Type Part No. Box Qty Type Part No. Box Qty Type Part No. Box Qty TM -33 on request TM -34 on request TM -44 coding on request coding on request coding on request on request Drill hole D = 3.8 for self tapping screw 0.084.02.0 80 87, Overall dimensions, steel cutout and drill hole configuration are identical for all variants 390

wiecon slots in two rows of 3 pole/ pole = Type TM -3 Type TM - Type Part No. Box Qty Type Part No. Box Qty Type Part No. Box Qty TM -3 coding on request on request TM cover suitable for all pole combinations TM -XX TM -XX 1.800.88.0 Sealing plug 3 pole 4 pole pole 0.2.97.1 0.2.7.1 0.2.827.1 391

wiecon ASI Node connector (insulation displacement technology) pitch.00/.08 mm Rated cross section: 0.7 mm 2 Rated current: 3 A Wire range: 0. 0.7 mm 2 finely stranded 2 V/4 kv/3 overvoltage category III 400 V/4 kv/2 overvoltage category II 0 V/4 kv/1 overvoltage category I Current range: 3 ma to 3 A solder pin 1.0 x 1.0 mm drill hole Ø 1.4 mm Rated voltages VDE 01 UL Data CSA Data Approvals field-/factory wiring pitch.00/.08 mm ASI node connector 2 pole Cap black Cap yellow Cap red (colour of socket base: grey) Type 8113 BSK/2 No. 20 18 AWG 300 V 3 A No. 20 18 AWG 300 V 3 A K Type Part No. Box Qty 2.399.983.0 2.399.983.8 2.399.983. Marker tag green 04.240.093.0 392 Conductors with PVC and EARTH insulated cores can be connected. Others available on request. The wire diameter of the finely stranded copper conductor must be at least 0.2 mm. The norm DIN VDE 029 applies to the structure of the wire.