WWW.AUTOMOTIVE.CZ
AUTOMOTIVE TWO POST HYDRAULIC LIFT Hydraulic drive highly efficient and economical. Height limit control switch to protect the car. Set of truck adaptors 50 mm and 100 mm. - LOADING CAPACITY 2500 kg / 3000 kg - ASYMMETRIC DESIGN - HIGHLY EFFICIENT AND ECONOMICAL HYDRAULIC DRIVE - HEIGHT LIMIT CONTROL SWITCH FOR VEHICLE PROTECTION - SET OF TRUCK ADAPTORS 50 mm AND 100 mm - EASY OPERATION - LIFTS ARE DESIGNED AND CONSTRUCTED IN ACCORDANCE WITH REGULATIONS EN 1493-100% CZECH MADE Completely technical information 06 at page 01
AUTOMOTIVE TWO POST HYDRAULIC LIFT Hydraulic drive highly efficient and economical. Height limit control switch to protect the car. Lower trajectory for touch points suitable for sport cars (79 mm). - LOADING CAPACITY 3000 kg - ASYMMETRIC DESIGN - HYDRAULIC DRIVE HIGHLY EFFICIENT AND ECONOMICAL - HEIGHT LIMIT CONTROL SWITCH TO PROTECT THE CAR - ELECTRIC OPERATING OF SAFETY LOCKS - LOWER TRAJECTORY FOR TOUCH POINTS SUITABLE FOR SPORT CARS - SAFETY IN ADVANCE ACOUSTIC SIGNAL DURING LOWERING - LIFTS ARE DESIGNED AND CONSTRUCTED IN ACCORDANCE WITH REGULATIONS EN 1493-100% CZECH MADE Completely technical information 06 at page 02
AUTOMOTIVE TWO POST HYDRAULIC LIFT Electro-magnetic button operation control. Set of truck adaptors 50 mm and 100 mm. High static and dynamic stability. - LOADING CAPACITY 3000 kg - ASYMMETRIC DESIGN - HYDRAULIC DRIVE HIGHLY EFFICIENT AND ECONOMICAL - EXCELLENT STATIC AND DYNAMIC STABILITY - SET OF TRUCK ADAPTORS 50 mm AND 100 mm - EASY OPERATION - PERFECT SOLUTION FOR WORKSHOP WITH LIMITED HEIGHT - LIFTS ARE DESIGNED AND CONSTRUCTED IN ACCORDANCE WITH REGULATIONS EN 1493-100% CZECH MADE Completely technical information 06 at page 03
AUTOMOTIVE TWO POST HYDRAULIC LIFT Variety of heights 3670*/4000/4200/4400/4650 mm. Ergonomic cover with variable operation control. Electro box 2x230V. - LOADING CAPACITY 3600 kg* / 4000 kg - ASYMMETRIC DESIGN - HYDRAULIC DRIVE HIGHLY EFFICIENT AND ECONOMICAL - NEW ERGONOMIC POWER PACK COVER - HEIGHT LIMIT CONTROL SWITCH TO PROTECT THE CAR - VARIABILITY IN POSTS EXTENSIONS 3670*/4000/4200/4400/4650 mm - SET OF TRUCK ADAPTORS 50 mm AND 100 mm - EASY OPERATION - LIFTS ARE DESIGNED AND CONSTRUCTED IN ACCORDANCE WITH REGULATIONS EN 1493-100% CZECH MADE Completely technical information 06 at page 04
AUTOMOTIVE TWO POST HYDRAULIC LIFT Variety of heights 4000/4300/4600/4900 mm. Highly efficient and economical hydraulic drive. New ergonomic power pack cover. - LOADING CAPACITY 5500 kg - SYMMETRIC DESIGN - HYDRAULIC DRIVE HIGHLY EFFICIENT AND ECONOMICAL - ERGONOMIC POWER PACK COVER TO MAKE EASY OPERATION CONTROL - HEIGHT LIMIT CONTROL SWITCH TO PROTECT THE CAR - VARIABILITY IN POSTS EXTENSIONS 4000/4300/4600/4900 mm - SET OF TRUCK ADAPTORS 50 mm AND 100 mm - EASY OPERATION - LIFTS ARE DESIGNED AND CONSTRUCTED IN ACCORDANCE WITH REGULATIONS EN 1493-100% CZECH MADE Completely technical information 06 at page 05
TECHNICAL DATA AUTOMOTIVE TWO POST HYDRAULIC LIFT ASYMMETRIC HYDRAULIC LIFTS COMPARATIVE TABLE AMI 2,5 STANDARD AMI 3,0 STANDARD AMI 3,0 N-LINE AMI 3,0 GARAGE Maximum loading capacity Maximum lifting time Minimum lowering time 2500 kg / 3000 kg 30 s 27 s 3000 kg 29 s 25 s 3000 kg 32 s 25 s Power system Motor Maximum height of arm H O Minimum height of arm H U Maximum clearance height H L Total height H G Maximum clear distance of posts B L Maximum clearance width B H Total width B G 1,5 kw 1851 mm 101 mm 3550 mm 3670 mm 2565 mm 2240 mm 3035 mm 1,5 kw 1901 mm 79 mm 3650 mm 3740 mm 2565 mm 2365 mm 3025 mm TN-S 3/N/PE 400/230V AC, 50 Hz 2,2 kw 1935 mm 101 mm unlimited 3050 mm-optional 2565 mm-optional 2300 mm-optional 3235 mm-optional Extension of short arm L K Extension of long arm L L 570 mm - 890 mm 930 mm - 1480 mm 557 mm - 872 mm 905 mm - 1476 mm 570 mm - 890 mm 930 mm - 1480 mm * only for type - right to make technical changes reserved ASYMMETRIC HYDRAULIC LIFTS TECHNICAL DRAWING AMI 3,6 CLASSIC* AMI 4,0 VARIANT 3600 kg* / 4000 kg 39 s 24 s 2,2 kw 1851 mm 101 mm 3550*/3880/4080/4280/4530 mm 3670*/4000/4200/4400/4650 mm 2565 mm 2240 mm 3035 mm 570 mm - 890 mm 930 mm - 1480 mm Basis of lift Threshing floor Bearing concrete SYMMETRIC HYDRAULIC LIFTS Maximum loading capacity 5500 kg Maximum lifting time 48 s Minimum lowering time 26 s Power system TN-S 3/N/PE 400/230V AC, 50 Hz Motor 3,0 kw Maximum height of arm H O 1985 mm Minimum height of arm H U 135 mm Maximum clearance height H L 3863/4163/4463/4763 mm Total height H G 4006/4306/4606/4906 mm Maximum clear distance of posts B L 3000 mm Maximum clearance width B H 2765 mm Total width B G 3600 mm Extension of arm L L 700 mm - 1421 mm - right to make technical changes reserved SYMMETRIC HYDRAULIC LIFTS TECHNICAL DRAWING Basis of lift Threshing floor Bearing concrete Basis of lift Threshing floor Bearing concrete 06
TECHNICAL DATA AUTOMOTIVE TWO POST HYDRAULIC LIFT LIFT ASSEMBLING - AMI lifts are typically delivered pre-assembled and packed in heavy transport resistant frame. - To put on the hand the lift correctly is particularly difficult task. Therefore is strongly recommended that the lift is assembled, fixed on the floor and adjusted by specialists certified by producer. - The building roof must be higher about 100mm than the total lifting height. - AMI lifts can be fixed only on top quality concrete floor representing the high quality concrete (the minimum concrete quality mark C20/25 under P EN 1992-1-1 as per ČSN 731201) slab at 150 mm AMI 2,5 STANDARD; AMI 3,0 STANDARD; AMI 3,6 CLASSIC; AMI 4,0 VARIANT 200 mm AMI 3,0 N-LINE; AMI 3,0 GARAGE 250 mm alternatively, on the foundation of the same concrete having the dimensions 120 by 70 centimetres under each post and sunk to a minimum depth of 500 millimetres indoors and 800 millimetres outdoors. - The tightening torque of all the anchorage bolts is 150 Nm. - There must be an electricity line available at the site complying with the following specifications: TN-S 3/N/PE AC 400V/230V/50 Hz. This power line must be provided with the 16/3/C (20/3/C for ) amperes contact breaker fuse complying with the characteristics of the electric motor of the lift. - The oil tank of the lift must be filled with the oil OHHM 32 (the level of filling can be checked through the transparent plastic tank). PACKING DIMENSION TYPE LENGTH WIDTH HEIGHT GROSS WEIGHT AMI 2,5 STANDARD 3,70 m 0,94 m 0,45 m 521 kg AMI 3,0 STANDARD 3,70 m 0,94 m 0,45 m 521 kg AMI 3,0 N-LINE 3,75 m 1,04 m 0,34 m 470 kg AMI 3,0 GARAGE 3,10 m 1,00 m 0,70 m 590 kg AMI 3,6 CLASSIC 3,70 m 0,94 m 0,45 m 521 kg AMI 4,0 VARIANT 4000/4200/4400/4650 mm 4,65 m 0,94 m 0,45 m 648 kg / 656 kg / 662 kg / 672 kg 4000/4300/4600/4900 mm 3,70 m 1,02 m 0,51 m 856 kg / 898 kg / 900 kg / 922 kg EXTENSION 1,50 m 0,60 m 0,45 m 60 kg - right to make technical changes reserved COLOUR OF THE LIFTS ACCORDING END-USER REQUEST, RAL CLASSIFICATION AS REFERENCE 07
ACCESSORIES AUTOMOTIVE TWO POST HYDRAULIC LIFT TWO STAGE ARM - 2-stage arm short 570 mm 890 mm, 092216-00-00-2-stage arm long 930 mm 1480 mm, 092211-00-00 AMI 2,5 CLASSIC AMI 3,0 CLASSIC AMI 3,6 STANDARD AMI 4,0 VARIANT THREE STAGE ARM - 3-stage arm A 726 mm 1447 mm, 092209-00-00-3-stage arm N 670 mm - 1500 mm, 392210-00-00-3-stage arm S 700 mm 1421mm, 098210-00-00-3-stage arm EX 900 mm 2000 mm, 398210-00-00 AMI 2,5/3,0 STANDARD A AMI 3,0 N-LINE N AMI 3,6 CLASSIC A AMI 4,0 VARIANT A S, EX ARM EXTENSION - Arm extension A 300 mm, 092800-00-00 - Arm extension S30 300 mm, 099800-00-00 - Arm extension S45 450 mm, 099810-00-00 AMI 3,6 CLASSIC AMI 4,0 VARIANT A A S30, S45 RUBBER PADS - Rubber pads Ø 110 mm, GP11, 80292 / 2 - Rubber pads Ø 125 mm, GPV, 20219 - Rubber pads with the steel frame GPK, 330200000000 - Rubber pads height GPV, 330000000220 AMI 2,5/3,0 STANDARD GP11, GP12, GPK, SP AMI 3,0 N-LINE GP11, GP12, GPK AMI 3,6 CLASSIC GP11, GP12, GPK AMI 4,0 VARIANT GP11, GP12, GPK GP11, GP12, GPK AMI 2,0 NIAGARA GPV ADJUSTABLE PADS - Adjustable pads SP 092851 00-00 AMI 2,5/3,0 STANDARD SP AIM 3,0 N-LINE SP TRUCK ADAPTOR - Truck adaptor, NP05, 80301 - Truck adaptor, NP10, 80302 - Truck adaptor, NP15, 80303 - Truck adaptor, NP25, 80304 - Truck adaptor, NL05, 392401-00-00 - Truck adaptor, NL10, 392402-00-00 - Truck adaptor, NL15, 392403-00-00 - Truck adaptor, NL25, 392404-00-00 SINGLE-PHASE POWERED - Single-phase powered AMI 2,5/3,0 STANDARD AMI 3,0 N-LINE AMI 3,0 GARAGE AMI 3,6 CLASSIC AMI 4,0 VARIANT AMI 2,5/3,0 STANDARD NP05, NP10, NP15, NP25 AMI 3,0 N-LINE NL05, NL10, NL15, NL25 AMI 3,0 GARAGE NP05, NP10, NP15, NP25 AMI 3,6 CLASSIC NP05, NP10, NP15, NP25 AMI 4,0 VARIANT NP05, NP10, NP15, NP25 NP05, NP10, NP15, NP25 ELECTRO-MAGNETIC BUTTON OPERATING SYSTEM - Electro-magnetic button operating system AMI 3,6 CLASSIC AMI 4,0 VARIANT ELECTRO BOX - Electro box with connection 2x230V SPECIAL LIFT WIDTH - Special lift width (dimension in scheme B L ) AMI 2,5/3,0 STANDARD AMI 3,0 N-LINE AMI 3,0 GARAGE AMI 3,6 CLASSIC AMI 4,0 VARIANT AMI 2,5/3,0 STANDARD 0 mm - 3400 mm AMI 3,0 N-LINE 0 mm - 3750 mm AMI 3,0 GARAGE Optional AMI 3,6 CLASSIC 0 mm - 3400 mm AMI 4,0 VARIANT 0 mm - 3400 mm 0 mm - 4600 mm 08
AUTOMOTIVE FOUR POST HYDRAULIC LIFT New ergonomic power pack cover. Slip plate for AMI 4,0 N-WAY (L=1650 mm). Electro-magnetic operating system for gravitational safety lock. - LOADING CAPACITY 4000 kg - DESIGNED FOR 3D WHEEL ALIGNMENT - SYMMETRIC DESIGN - ADJUSTABLE PLATFORMS (DISTANCES 1500-1600-1700 mm) - NEW ERGONOMIC POWER PACK COVER - EXCELLENT RESISTANCE OF LIFT STRUCTURE-STATIC AS WELL AS DYNAMIC - HYDRAULIC DRIVE HIGHLY EFFICIENT AND ECONOMICAL - ELECTRO-MAGNETIC SAFETY LOCK - ACOUSTIC WARNING FINAL DESCENT PHASE - LIFTS ARE DESIGNED AND CONSTRUCTED IN ACCORDANCE WITH REGULATIONS EN 1493-100% CZECH MADE Completely technical information 10 at page 09
TECHNICAL DATA AUTOMOTIVE FOUR POST HYDRAULIC LIFT TECHNICAL DATA AMI 4,0 N-WAY Maximum loading capacity 4000 kg Maximum lifting time 50 s Minimum lowering time 20 s Power system TN-S 3/N/PE 400/230V AC, 50 Hz Motor 3,0 kw Total height H G 2500 mm Maximum height of platform H O 1950 mm Minimum height of platform H U 225 mm Platform gauge 1500 mm - 1600 mm - 1700 mm Platform width 475 mm Maximum clear distance of posts B L 2970 mm Maximum clearance width B H 2510 mm Total width B G 3340 mm Maximum length L G 6140 mm Clear distance of posts L L 4812 mm - right to make technical changes reserved LIFT ASSEMBLING - AMI 4,0 N-WAY To put on the hand the lift correctly is particularly difficult task. Therefore is strongly recommended that the lift is assembled, fixed on the floor and adjusted by specialists certified by producer. Its therefore strongly recommended that the lift is assembled and adjusted on the site by a team of authorized servicemen. AMI lifts can be fixed only on top quality concrete floor representing the high quality concrete slab at least 20 centimetres thick (the minimum concrete quality mark C20/25, but maximum mark C50/60, as per ČSN 731201) or, alternatively, on the foundation of the same concrete having the dimensions 700 by 700 millimetres under each post and sunk to a minimum depth of 500 millimetres indoors and 800 millimetres outdoors. In place of the lift s installation there has to be in radius the network TN-S 3/N/PE AC 400V/230V/50Hz secured with the circuit breaker 20/3/C. PACKING DIMENSION - length 5,25 m x width 0,6 m x height 0,9 m; gross weight 1360 kg ACCESSORIES FOR 4-POST HYDRAULIC LIFTS HYDRAULIC JACKING BEAM AMI J 2,0 RH - Hydraulic jacking beam with manual pump. Loading capacity 2000 kg. HYDRAULIC JACKING BEAM AMI J 2,0 RH - Hydraulic jacking beam with pneumatic pump. Loading capacity 2000 kg. LOWERING ENTERING - Lowering entering on platform from 11 O to 6 O. TURN PLATES ADJUSTMENT - Reduction for delimitation height of turn plates. ELEKTRO KIT - Working space lighting inclusive of electric 2x230 V. AIR DISTRIBUTION - Air-line connection between lift platforms. 10
AUTOMOTIVE FOUR POST HYDRAULIC LIFT Automatic descent control. 3D KIT. Variable placing turn plates and slip plates for 3D wheel alignment. Slip plates. Slip plates with variable platform placing (L=750 mm). - LOADING CAPACITY 5000 kg - DESIGNED FOR 3D WHEEL ALIGNMENT - VARIABILITY IN PLATFORM COVERS INSTALLATION 3D KIT - VARIABILITY IN SLIP PLATES INSTALLATION - SYMMETRIC DESIGN - ADJUSTABLE PLATFORMS (DISTANCES 1500-1600-1700 mm) - NEW ERGONOMIC POWER PACK COVER - EXCELLENT RESISTANCE OF LIFT STRUCTURE-STATIC AS WELL AS DYNAMIC - HYDRAULIC DRIVE HIGHLY EFFICIENT AND ECONOMICAL - ELECTRO-MAGNETIC SAFETY LOCK - ACOUSTIC WARNING FINAL DESCENT PHASE - LIFTS ARE DESIGNED AND CONSTRUCTED IN ACCORDANCE WITH REGULATIONS EN 1493-100% CZECH MADE Completely technical information 12 at page 11
TECHNICAL DATA AUTOMOTIVE FOUR POST HYDRAULIC LIFT TECHNICAL DATA AMI 5,0 N-WAY Maximum loading capacity 5000 kg Maximum lifting time 50 s Minimum lowering time 20 s Power system TN-S 3/N/PE 400/230V AC, 50 Hz Motor 3,0 kw Total height H G 2286 mm Maximum height of platform H O 1950 mm Minimum height of platform H U 220 mm Platform gauge 1500 mm - 1600 mm - 1700 mm Platform width 475 mm Maximum clear distance of posts B L 2970 mm Maximum clearance width B H 2510 mm Total width B G 3340 mm Maximum length L G 6340 mm Clear distance of posts L L 5000 mm - right to make technical changes reserved LIFT ASSEMBLING - AMI 5,0 N-WAY To put on the hand the lift correctly is particularly difficult task. Therefore is strongly recommended that the lift is assembled, fixed on the floor and adjusted by specialists certified by producer. Its therefore strongly recommended that the lift is assembled and adjusted on the site by a team of authorized servicemen. AMI lifts can be fixed only on top quality concrete floor representing the high quality concrete slab at least 20 centimetres thick (the minimum concrete quality mark C20/25, but maximum mark C50/60, as per ČSN 731201) or, alternatively, on the foundation of the same concrete having the dimensions 700 by 700 millimetres under each post and sunk to a minimum depth of 500 millimetres indoors and 800 millimetres outdoors. In place of the lift s installation there has to be in radius the network TN-S 3/N/PE AC 400V/230V/50Hz secured with the circuit breaker 20/3/C. PACKING DIMENSION - length 5,25 m x width 0,6 m x height 0,9 m; gross weight 1400 kg ACCESSORIES FOR 4-POST HYDRAULIC LIFTS HYDRAULIC JACKING BEAM AMI J 2,0 RH - Hydraulic jacking beam with manual pump. Loading capacity 2000 kg. HYDRAULIC JACKING BEAM AMI J 2,0 RH - Hydraulic jacking beam with pneumatic pump. Loading capacity 2000 kg. 3D KIT - Set for measuring wheel alignment with 3D technology. - Include 14 pcs. covering, 2 pcs. slip plates (L=750 mm). SLIP PLATES - Slip plates with variable platform placing (L=750 mm). PLATFORM PROTECTION - Surface platform protection. CLEARANCE OPTION - 2 nd entering on platform. - Inclination of ramp 11 O. 12
HYDRAULIC JACKING BEAM Adjustable high rise setting. Hydraulic system. TECHNICAL DATA AMI J 2,5 VH AMI J 2,0 RH, VH Maximum loading capacity 2500 kg 2000 kg Maximum lifting time 23 sec. 17 sec. Minimum lowering time 43 sec. 27 sec. Working pressure 30 MPa 20 MPa Oil viscosity 32 mm 2 s -1 32 mm 2 s -1 Netto weight 130 kg 120 kg Maximum arm distance 1600 mm 1600 mm Maximum arm height 646 mm 545 mm Minimum arm height 266 mm 190 mm Minimum arm distance 800 mm 780 mm Maximum track 1290 mm 1180 mm Minimum track 862 mm 780 mm Total length 1650 mm 1650 mm Total width 480 mm 385 mm Total height 681 mm 515 mm RH - Hydraulic jacking beam with manual pump. VH - Hydraulic jacking beam with pneumatic pump. PACKING DIMENSION - length 0.81m x width 0,42 m x height 0,22 m; gross weight 130 kg 13
AUTOMOTIVE HYDRAULIC PLATFORM LIFT - CAPACITY 2000 kg - MOBILE VERSION - SUITABLE FOR OUTSIDE - QUICK AND SAFETY LIFTING - EASY OPERATION Movable kit. Set for equipment transfer. Rubber pads. Rubber pads for stable lifting. TECHNICAL DATA AMI 2,0 NIAGARA Maximum loading capacity Maximum lifting time Minimum lowering time Power system Motor Working pressure Gross weight Maximum lifting height Total height when lowering Height by maximum lifting Total width Total length Platform width 2000 kg 20 s 25 s TN-S 3/N/PE 400/230V AC, 50 Hz 1,5 kw 21 MPa 350 kg 490 mm 96 mm 586 mm 1790 mm 2030 mm 455 mm PACKING DIMENSION - length 1,8 m x width 2,0 m x height 0,1m; gross weight 385 kg 14
AUTO MOTIVE INDUSTRIAL a.s. Sokolovská 1169 570 01 Litomyšl CZECH REPUBLIC DIČ: CZ 252 72 420 IČO: 252 72 420 Telefon: +420 461 618 555-7 Fax: +420 461 612 132 E mail: info@automotive.cz ami@automotive.cz Http: EUROPEAN UNION EUROPEAN REGIONAL DEVELOPMENT FUND INVESTMENT IN YOUR FUTURE