Technical Datasheet SNK6D0 Catalogue Page ZS-S-R2 Screw Clamp Terminal Blocks Disconnect with lever Simplify the disconnect operations for the disconnect terminal blocks installed next to fuse terminal blocks ZS-SF: - With the same profile as ZS- SF, the ZS-S-R2 disconnect lever is easily operated by hand and the wiring of the alternated disconnect and fuse circuits is easier. SNK670F004 SNK0030F0000 3D CAD outline drawings available on "Control Product 3D" portal SNC003 F0000 Screw Clamp Terminal Blocks mm² 6 AWG Ordering Details Color Grey, Orange Grey, Orange 8 mm 0.3 in Spacing Type Order Code EAN Code Pack (ing) Weight ( pce) g ZS-S-R2 SNK0847R0000 3472908473 0 3.90 Declarations and Certificates CE CB RoHS USR CNR CSA EAC BV DNV
Declarations and Certificates CE CE CB CB RoHS RoHS USR CNR USR CNR SND222U* SND690A02* SND2306F02* SND64A02* CSA CSA SND670A02* EAC EAC SND609A* BV DNV BV DNV SND673A02* SND687A02* Explosive Atmosphere: ATEX Classification Group Category Protection Method In the presence of explosive dust atmosphere, terminal blocks are to be installed in certified enclosure II 2D General Information Wire stripping length TH 3-7., TH 3- Denudage IP TH 3-7., TH 3- NEMA Ex e: increased security The following information must be strictly adhered to in order to guarantee the terminal block electrical, mechanical and environmental performance. Protection Rail IEC 60947-3 mm 0.2 in Operating tool Torque Flat screwdriver Tete de viscouple Screw clamp Flat screwdriver 4 mm 0.7 in.3 N.m. N.m ± 0.3 N.m ± 2.6 N.m Screw rail contact (Maximum value) Disconnect device Material Specifications Insulating material CTI Flammability Polyamide 600 V UL94 V0 NF F 6 I2F3 Connecting capacity per clamp Rigid - Solid / Stranded conductor Flexible conductor Flexible conductor with non insulated ferrule Flexible conductor with insulated ferrule Gauge Ferrule maximum outer diameter or conductor insulation maximum outer diameter 0.... mm² 0.... mm² 0.... mm² 0.... 6 mm² A-B IEC 60947- Needle flame testec 606-- Compliant Screw clamp 24... 6 AWG 24... 8 AWG 24... AWG.2 mm 0. in Ferrule 7. mm 0.29 in The "Connecting capacity with ferrule" data is guaranteed with ABB crimping tool PS-3 (crimping capacity up to mm²). 2 Technical Datasheet SNK6D0 ABB
Multi Connecting capacity per clamp 2 Rigid - Solid / Stranded conductors 0.... 4 mm²... 2 AWG 2 Flexible conductors 0.... 4 mm² 2 Flexible conductors with twin ferrule 0.... 4 mm²... 2 AWG Don't mix solid and flexible conductors in the same clamp Don't mix solid or flexible conductors of different sizes in the same clamp The "Connecting capacity with ferrule" data is guaranteed with ABB crimping tool PS-3 (crimping capacity up to mm²) Cross section Rated cross section 4 mm² 2 AWG Maximum Cross section mm² 6 AWG Electrical characteristics Current Rated current A Field and factory wiring Cat.2 UL 9 22 A Factory wiring Cat. UL 9 22 A CSA-C-22.2 n 8 22 A Maximum Exe current IEC/EN 60079-7 Rated short-time withstand current s (Icw) 480 A Short-time withstand current 0. s s s 30 s min Rated short-circuit withstand current UL 9 Max. current (4 temperature increase) / Max. cross section (mm²) 2 A Maximum short circuit current (s) 480 A mm² Short Circuit Current Rating (SCCR) SA UL 9 supplement SCCR UL 9 With the following configurations: Suitable conductor wire range Maximum voltage Fuse class / Max. amp. Rating J T RK RK G CC Voltage Rated voltage IEC 60947-630 V Rated voltage UL 9 600 V Use Group UL 9 B,C Rated voltage CSA-C-22.2 n 8 600 V Rated voltage Ex e IEC/ EN 60079-7 Rated impulse withstand voltage IEC 60947-6000 V Dielectric test voltage IEC 60947-00 V Pollution degree IEC 60947-3 Overvoltage category IEC 60947- III ABB Technical Datasheet SNK6D0 3
Temperature range Ambient temperature min/max Storage -... + C Installing -... +40 C Service -... + C -67... +230 F +23... +4 F -67... +230 F Current Derating curve for continuous service temperature Dissipated power Maximum dissipated power at rated current IEC 60947- Maximum dissipated power at maximum Exe current IEC 60079-7 Rated power dissipation at an ambient temperature of 23 C - IEC 60947-7-3 Separate arrangement / Overload and short-circuit protection Separate arrangement / Exclusive short-circuit protection fuse and 4 feed-through blocks Compound arrangement / Overload and short-circuit protection Compound arrangement / Exclusive short-circuit protection fuse blocks Environmental Characteristics Additional climatic tests Dry heat Cyclic damp heat Cold Damp heat steady state IEC 60068-2 2 Compliant Temperature +0 C 96 h IEC 60068-2 30 Compliant Temperature + C Relative humidity Number of cycles ( cycle = 24h) 2 IEC 60068-2 Compliant Temperature -40 C 96 h IEC 60068-2-78 Temperature Relative humidity Corrosion Salt mist IEC 60068-2 Compliant 96 h Concentration % SO2 ISO 6988 Compliant 48 h Concentration 0.2 dm³ Flowing mixed gas corrosion test IEC 60068-2 60 Number of the test method 4 Technical Datasheet SNK6D0 ABB
Vibrations and shocks Sinusoidal vibrations IEC 60068-2-6 Frequency range Number of cycles Functional random vibrations IEC 6373 Category Class B 3 axes Frequency range Long life testing at increased random vibrations IEC 6373 Category Class B 3 axes Frequency range Shock IEC 6373 Category Class B 3 axes ZS-S-R2 Terminal Block Accessories Compatibility Some accessories may modify the terminal block's rating. See complete information in the accessories catalog page. Description Type Order Code Pack (ing) Weight pieces g ( pce) MG-CPM 3 SNB0479R062 680 0.273 2 2 3 3 4 4 6 End Stops End Stops Test Connectors Test Connectors Test Adapters Test Adapters Spacers MC82 MC82PA UMH SAT8 BAM4 BAZ TC TC-R TP2 TP4 JB8-2 JB8-3 JB8-4 JB8- JB8- ES-TC8 SNK60000R0000 SNK69999R0000 SNK9006R0000 SNK90066R0000 SNK90000R0000 SNK900002R0000 SNK9000R0000 SNK900R0000 SNK9003R0000 SNK900R0000 SNK908302R0000 SNK908303R0000 SNK908304R0000 SNK90830R0000 SNK9083R0000 SNK9004R0000 22 0 0 0 0 0 40.00 4.00 0. 6.00 4.00.30...70 2.40 2.70 4..60 7.00 4..40 ABB Technical Datasheet SNK6D0
Contact us ABB France Electrification Products Division PG Connection 3, rue Jean Perrin F-69687 Chassieu cedex / France Tel. +33 (0)4 7222 722 Fax +33 (0)4 7222 93 Note We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of ABB. Copyright ABB All rights reserved SNK6D0 - PDF