Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2 to 6 for Safety Instruction and Solenoid Valve Precautions. Environment Caution Operate the valve in an area in which the vibration does not exceed 5 G. Vibrations could cause the valve to malfunction. Specifications Fluid Air Operating pressure 0 to 1.0 MPa Pilot pressure Ambient and fluid temperature 0.15 to 1.0 MPa Effective area 1 8 : 7 mm 2 1 8 Side ported 350 g Bottom ported 300 g Lubrication Not required (Use turbine oil Class 1 ISO VG32, if lubricated.) Function Single pilot Double pilot VR4151 Sub-plate W/o sub-plate W/ sub-plate Side piping W/ sub-plate Bottom piping W/o sub-plate W/ sub-plate Side piping W/ sub-plate Bottom piping VR4151-00-0 VR4151-00-1 VR4151-01A-0 VR4151-01A-1 VR4151-01B-0 VR4151-01B-1 VR4152-00-0 VR4152-00-1 VR4152-01A-0 VR4152-01A-1 VR4152-01B-0 VR4152-01B-1 VR4152 Indicator SA VA SA VA VM VR VH VHS Component Parts q w e r t y u Valve Sub-plate Pilot cover Spool Sleeve Detent assembly Piston cover ADC ZDC ADC Brass i o!0!1 Manual button Piston Spring Spring PE PE Steel!2 Gasket NBR!3 Gasket NBR!4 O-ring NBR 5-7-1
Series VR4151/4152 How to Order VR41 5 1 01 A 1 Indicator light 0 No 1 Yes Sub-plate A Side piping B Bottom piping 00 W/o sub-plate 01 Rc 1 8 N01 NPT 1 8 F01 G 1 8 Number of pilot ports 1 2 Single pilot Double pilot Number of ports 5 5 port Side ported Stroke 2 mm Indicator light Manual override (Button diameter ø3.5) Bottom ported Stroke 2 mm Indicator light Manual override (Button diameter ø3.5) 7-1/8 2-6.5 mounting hole 2-4.5 mounting hole 7-1/8 2-4.5 mounting hole 5-7-2
Shuttle Valve VR1210/1220 3 ported check valve with one output and 2 pneumatic signal input ports. Output always supplied by high pressure inlet. /Specifications Max. operating pressure Min. operating pressure Min. pressure differential Ambient and fluid temperature Effective area VR12 1 0 VR1210-01 VR1220-02 1.0 MPa 0.05 MPa 0.05 MPa 7 mm 2 15 mm 2 1 8 1 4 24 g 45 g How to Order 01 SA VA SA VA VM Thread type Nil N F Rc NPT G 01 1 8 02 1 4 VR VH VHS Body size 1 1 8 standard When right port has higher pressure When left port has higher pressure (Low pressure side) (High pressure (High pressure side) side) (Low pressure side) Component Parts q w Body Valve seat ADC Brass Metallic plated e r Valve O-ring Brass, NBR NBR VR1210 VR1220 20 3-1/4 16 3-1/8 21 16 20 SMC 38 16 5.5 mounting hole SMC 38 29 17.2 6.6 mounting hole 50 21.2 5-7-3
Series VR1210/1220 How to Order VR2110 01 Option Secondary tank connection board X3 Rc 1 4 X102 N.O. N.C. common type (With VM430) 01 Rc 1 8 N01 NPT 1 8 F01 G 1 8 Bracket mounted Panel mounted Rc 1/4 Spare tank connecting port processing possible 2-ø6.5 hole Mounting screw M6 x 1 x 12 Bottom of bracket Knob side 4-M6 thread Bracket side 4-ø7 hole Bracket plate t = 2 Panel thickness t = 3 or less 2-M6 x 1.0 thread depth 8 Panel mounting screw ø4 exhaust port Rc 1/8 output pressure port Rc 1/8 signal pressure port 5-7-4
Shuttle Valve with One-touch Fittings VR1210F/1220F Relay valves for controlling pneumatic signal lines The air of higher pressure side constantly flows to the side. High pressure Low pressure Low pressure High pressure VR1210F VR1220F Specifications 3.2 4 Metric size 6 Flow Rate and Effective Area Applicable tubing diameter 8 10 1/8" 5/32" Inch size 1/4" 5/16" Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure 0.05 MPa Ambient and fluid temperature Applicable tubing material (1) Nylon, Soft nylon, Polyurethane 1) Use caution about the maximum operating pressure when soft nylon and polyurethane is used. (Refer to Best Pneumatics Vol. 15.) 2) Brass components are all electroless nickel plated as standard. (Copper-free) VR1210F VR1220F Applicable tubing O.D. Metric size Inch size ø3.2 ø1/8" ø4 ø5/32" ø6 ø1/4" ø8 ø5/16" ø6 ø1/4" ø8 ø5/16" ø10 ø3/8" Flow rate (l/min (ANR)) 150 210 420 480 440 680 1000 Effective area (mm 2 ) 2.3 3.2 6.4 7.3 6.7 10.4 ) Flow rate is the value measured under a pressure of 0.5 MPa and a temperature of 20 C. 3/8" SA VA SA VA VM VR VH VHS How to Order VR 12 1 0F 06 1 2 Body size 1/8 standard Metric size 1/4 standard Shuttle valve 23 04 06 08 10 ø3.2 ø4 ø6 ø8 ø10 With One-touch fittings Applicable tubing diameter Inch size 01 03 07 09 11 For ø3.2, use ø1/8" tubing. ø1/8" ø5/32" ø1/4" ø5/16" ø3/8" 5-7-5
Series VR1210F/1220F Example of Operating Circuit OR circuit If either A or B is turned ON, cylinder is actuated. Self-hold circuit 1. If A is turned ON, the output turns ON. 2. Even though A is turned OFF, the output remains in ON state. 3. If B is turned ON in 2. state, the output is turned OFF. Output Interlock circuit When either A or B is turned ON, even though C turns ON, the output 3 will not be turned ON. Output 3 B Output 1 Output 2 A B C A B A ød3 L5 M2 ød2 Metric size: Light gray Inch size: Orange Blue L3 L4 ød1 L2 L1 Applicable tubing dia. ød Metric size: Light gray Inch size: Orange Metric Size d D1 D2 D3 L1 L2 L3 L4 L5 M2 (g) VR1210F-23 VR1210F-04 VR1210F-06 VR1210F-08 VR1220F-06 VR1220F-08 VR1220F-10 3.2 4 6 8 6 8 10 11.4 18.5 8.4 10.4 18.5 14.8 19.8 52 56 53.2 60.4 59 65 71.6 6.2 6.8 8.1 7.4 8.2 9.8 19.4 20.3 22.5 23.9 25.8 29.8 32.2 35.6 38.2 37.7 39.7 44.8 17.5 21.9 25.2 28.2 25.2 28.2 31 12.7 15.7 20.8 12.9 15.8 20.8 21.4 25.2 23.0 24.0 27.2 31.9 43.2 Inch Size d D1 D2 D3 L1 L2 L3 L4 L5 M2 (g) VR1210F-01 VR1210F-03 VR1210F-07 VR1210F-09 VR1220F-07 VR1220F-09 VR1220F-11 1/8" 5/32" 1/4" 5/16" 1/4" 5/16" 3/8" 11.4 13.2 13.2 17.9 8.4 10.4 13.2 13.2 18.5 14.8 19.8 52 56 54.4 60.4 59 65 69.8 6.2 6.8 7.1 8.1 7.4 8.2 9.5 19.4 20.3 22.5 23.9 25.8 29.8 32.2 36.2 38.2 37.9 39.7 44.5 17.5 21.9 25.6 28.2 25.6 28.2 31 12.7 15.7 20.8 12.9 15.8 20.8 21.4 25.2 23.5 24.0 31.4 31.9 53.0 5-7-6
AND Valve with One-touch Fittings VR1211F Relay valves for controlling pneumatic signal lines Only when air is supplied to both P1 and P2 does air flow to the side. When air pressure differs, pressure in the lower amount flows to the side. P1 VR1211F Specifications 3.2 Metric size 4 Applicable tubing diameter 6 1/8" Inch size 5/32" 1/4" Proof pressure Max. operating pressure Min. operating pressure Ambient temperature and operating fluid temperature 1.5 MPa 1 MPa 0.05 MPa Applicable tubing material (1) Nylon, Soft nylon, Polyurethane 1) Use caution about the maximum operating pressure when soft nylon and polyurethane is used. (Refer to Best Pneumatics Vol. 15.) 2) Brass components are all electroless nickel plated as standard. (Copper-free) SA VA SA VA VM VR VH VHS P2 If air is only supplied only to either P1 or P2 it, does not flow to the side. P1 P2 Flow Rate and Effective Area VR1211F Applicable tubing O.D. Metric size Inch size ø3.2 ø1/8" ø4 ø5/32" ø6 ø1/4" Flow rate (l/min(anr)) 100 120 150 170 Effective area (mm 2 ) 1.5 1.8 2.3 2.6 ) Flow rate is the value measured under a pressure of 0.5 MPa and a temperature of 20 C. How to Order P1 VR 12 1 1 F 06 P2 Body size 1 1/8 standard AND valve With One-touch fittings Applicable tubing diameter Inch size Metric size 23 ø3.2 04 ø4 06 ø6 01 03 07 For ø3.2, use ø1/8" tubing. ø1/8" ø5/32" ø1/4" 5-7-7
Series VR1211F Example of Operating Circuit Output 1 Output 2 Output 3 If both A and B are turned ON, which are in different pressure conditions, both output 1 and 2 will turn ON. Only when output 1 and 2 are in the ON state, and C turns ON, will output 3 turn ON. If either A or B is turned OFF, output 3 will not be turned ON, even if C is turned ON. A B C ød3 L5 M2 ød2 L3 L4 ød1 L2 L1 Applicable tube dia. ød Metric Size d D1 D2 D3 L1 L2 L3 L4 L5 M2 (g) VR1211F-23 VR1211F-04 VR1211F-06 3.2 4 6 11.4 8.4 10.4 14.8 52 56 53.2 6.2 6.8 25.7 26.6 28.8 36.1 38.5 41.9 17.5 21.9 25.2 12.7 15.7 12.9 15.8 26.4 30.4 25.0 Inch Size d D1 D2 D3 L1 L2 L3 L4 L5 M2 (g) VR1211F-01 VR1211F-03 VR1211F-07 1/8" 5/32" 1/4" 11.4 13.2 8.4 10.4 13.2 14.8 52 56 54.4 6.2 6.8 7.1 25.7 26.6 28.8 36.1 38.5 42.5 17.5 21.9 25.6 12.7 15.7 12.9 15.8 26.4 30.4 27.0 5-7-8
Time Delay Valve VR2110 Combination of adjustable orifice and fixed flow allows transmission of a pneumatic signal after a fixed time period. Signal Pressure vs. Time Delay A /Specifications VR2110-01 Supply pressure 0.1 to 1.0 MPa Signal pressure 0.25 to 0.8 MPa Time delay 0.5 to 60 s Repeatability ±10% F.S. Operating and fluid temperature Effective area 2.5 mm 2 1 8 500 g Non-actuated Spare tank Connecting port processing possible Tank Needle Knob SA VA SA VA VM VR VH VHS Time delay (sec) B Actuated before time set Signal pressure (MPa) Example) A is the point, which is set by the input signal pressure 0.25 MPa, with a delay time of 60 sec. With the same status, if the input signal pressure is increased to 0.8 MPa, the delay time varies to the B point ( 40 sec). Piping Length vs. Release Time Actuated after time set Signal/Supply pressure 0.6 MPa Signal/Supply pressure 0.3 MPa Release time (sec) V VM2 Piping length (m) If the input signal (PIL) is turned OFF, the release time of the time delay valve changes depending upon the effective area of the valve and the length of piping. Please refer to the above graph for the standard values. Component Parts q Body w Piston e Piston r Needle ADC Brass, NBR Brass, NBR Brass Metallic plated Rubber lined Rubber lined t y u i Spring Body Plunger Valve Steel ZDC Metallic plated Brass, NBR Rubber lined 5-7-9
Pneumatic-electric Relay VR3200/3201 Pneumatic-electric relay converts pneumatic signal to electric relay. /Specifications Operating pressure Ambient and fluid temperature Contacts Microswitch Rating VR3200-01 VR3201-01 Open type Splashproof (IP44 equivalent) 130 g 260 g 0.1 to 1.0 MPa 1 ab 1 8 Non-inductive load (A) Inductive load (A) Voltage Resistance load Light load Inductive load Electric motor load N.C. N.O. N.C. N.O. N.C. N.O. N.C. N.O. 125 VAC 15 15 4 2 10 10 4 2 250 VAC 15 15 3 1.5 10 10 3 1.5 8 VDC 15 15 3 1.5 15 15 5 2.5 14 VDC 15 15 3 1.5 10 10 5 2.5 30 VDC 6 6 3 1.5 5 5 5 2.5 125 VDC 0.5 0.5 0.3 0.3 0.05 0.05 0.05 0.05 250 VDC 0.25 0.25 0.2 0.2 0.03 0.03 0.03 0.03 VR320 0 01 How to Order Precautions Be sure to read before handling. Refer to pages 5-11-2 to 6 for Safety Instruction and Solenoid Valve Precautions. Piping Warning When connecting a pipe fitting to the port, place the wrench over the hexagon portion of the lid. If the wrench is placed over the microswitch body, the neck of the microswitch could break. 0 1 01 N01 F01 Rc 1 8 NPT 1 8 G 1 8 Open type Splashproof (IP44 equivalent) Component Parts q w Body Cap Brass Brass e Piston POM r t Spring Microswitch Contacts 1 ab 5-7-10
Series VR3200/3201 VR3200 VR3201 Terminal with solder Ridges min. 4 3-M4 x 5.5 terminal thread (With cup washer) SA VA SA VA VM VR VH VHS Detail on microswitch terminals Detail on micro switch terminals 5-7-11
Pneumatic Indicator VR3100 Transmitters: Miniature Pneumatic Indicator VR3110 Indicates the presence of pneumatic pressure. It is equivalent to the pilot lamp of an electrical system. This is an ultra-compact air indicator light to monitor the presence of air pressure. It is equivalent to the pilot lamp of an electrical system. /Specifications /Specifications VR3100-01R VR3100-01G VR3100-01O 0.1 to 0.8 MPa 100 c.p.m. or less Operating pressure Ambient and fluid temp. Frequency Color of indicator Red Green Orange Rc 1 8 40 g Color of indicator Operation Operating pressure Ambient and fluid temp. Frequency VR3110-01R VR3110-01G Red Green Piston style 0.15 to 1.0 MPa 300 c.p.m. or less R 1 8 6 g Clear cover Colored piston Colored piston (Red, Green) q w e r t Body Indicator window Piston Spring Packing Aluminum alloy Acrylic POM NBR q w e r t Body Piston A Plug Spring O-ring Brass POM PE NBR Panel mounting Stroke 2 mm Panel M22 x 1 5-7-12