Advanced Heat Exchangers BAZED PLATE HEAT EXHAE Advanced Heat Exchangers
ODA is a leading company in Heat Exchange, partner of all main hiller manufacturers. ODA produces a complete range of hell & Tube and Brazed Plate Heat Exchangers dedicated to efrigeration and Air onditioning. Our evaporators and condensers are available with different raw materials and well adapted to different refrigerants (22, 134a, 410A ) from 3 to 850 Tons. All our products are manufactured under IO 9001 with all the main worldwide certifications: AME, OT, L, PED, IA, UL. ODA Brazed plate heat exchangers carry the UL Mark for U and anada (ref. no.a359) TEHIAL IOMATIO The main applications of our brazed plate heat exchangers are the evaporation and the condensation of the refrigerant gas in the air conditioning and refrigeration plants, the hot water production in heat pumps, the heat recovery. uitable refrigerants are all Hs, Hs and others, fully compatible with the manufacturing materials. The dimensional data contained in this catalogue are to be intended indicative taking into account the manufacturing tolerances. We reserve the right to apply changes to this catalogue without prior notice. MATEIAL The top quality materials used to manufacture the ODA brazed plate heat exchangers satisfy the requirements of the 97/23/E Directive (Pressure Equipment Directive). The type construction of the brazed plate heat exchangers consists of: Plate heat exchangers onnections Brazing material tainless steel thickness 0.01 (316L type). tainless steel (304L type). opper AEOIE ollowing optionals are available on request: - Loose or welded mounting supports - Insulation. onfiguration - connections ILE IUIT our connections ode AA B AB B A AD B AE B B A B B A B AH ive connections BA B BB B B B BD ix connections B A B B B B B B D even connections B B B DA onfiguration - connections DUAL IUIT ix connections 1 2 B MA 1 2 MB even connections 1 2 B A 1 2 B B 1 2 1 2 B D Eight connections 1 2 B PA Both circuits are PEUMATIALLY tested, to avoid any humidity contamination. Progressive number to identify size & type connections Operating conditions D evaporator with distributor H High Pressure HD High Pressure with distributor Model 09, 12, 22, 82, 182, 2, 222, 404, 424, 606 Model: ode: Model 09, 12, 22, 82, 182, 2, 222, 404, 424, 606 umbers of plates X onfiguration connections 0 evaporator condensator 1 evaporator with distributor ingle circuit Operating 2 High Pressure 3 High Pressure with distributor Dual ircuit: 4 ross circuit refrigerant 5 ross circuit refrigerant with distributor 6 High Pressure refrigerant 7 High Pressure refrigerant plus distributor Progressive number to identify size & type connections Made in Italy PLEAE EAD OPEATI AD ITUTIO MAUAL BEOE UE 3 EV 1.0-14
06 ILE IUIT 07 ILE IUIT Advanced Heat Exchangers 80 41 12 LEHT 80 41 12 LEHT 70 70 172 211 182 221 2 M8x25 2 M8x25 B B B B ILET efrigerant - ILET econdary luid OUTLET efrigerant -B OUTLET econdary luid ILET efrigerant - ILET econdary luid OUTLET efrigerant -B OUTLET econdary luid PEIIATIO 06 06H PEIIATIO 07 07H PEUE AE (bar) Vacuum to 30 Vacuum to 45 oldering Threaded M Threaded otalock PEUE AE (bar) Vacuum to 30 Vacuum to 45 oldering Threaded M Threaded otalock -100 to +1-100 to +1 MAXIMUM OETIO AVAILABLE (mm) 18 18 MAXIMUM LOW ATE (m3/h) 5,22 5,22 VOLUME / HAEL (liters) 0.0346 0.0346 DIMEIO (mm) 80 x 211 80 x 211 8 22 2 19 12 I2 25 I13 22 14 16 30 18 I22 19 I -100 to +1-100 to +1 MAXIMUM OETIO AVAILABLE (mm) 18 18 MAXIMUM LOW ATE (m3/h) 5,2 5,2 VOLUME / HAEL (liters) 0.036 0.036 DIMEIO (mm) 80 x 221 80 x 221 8 22 2 19 12 25 I13 22 14 16 30 18 19 LEHT ALULATIO (mm) x 2,45 + 9 x 2,45 + 9 WEIHT ALULATIO (kg) x 0.06 + 0.5 x 0.06 + 0.5 tandard connections: 18-22 LEHT ALULATIO (mm) x 2,45 + 9 x 2,45 + 9 WEIHT ALULATIO (kg) x 0.06 + 0.5 x 0.06 + 0.5 tandard connections: 18-22 AME H DEI AME H DEI umber of plates umber of plates oldering onnections otalock onnections Male oldering onnections otalock onnections Male PLATE HEAT EXHAE MATEIAL tainless teel 316L Thickness 0.35 mm PLATE HEAT EXHAE MATEIAL tainless teel 316L Thickness 0.3 mm EV 1.0-14 EV 1.0-14 4 5
09 ILE IUIT 22 ILE IUIT Advanced Heat Exchangers 80 41 12 LEHT 80 41 12 LEHT 3 289 328 2 417 456 2 M8x25 2 M8x25 B B B B ILET efrigerant - ILET econdary luid OUTLET efrigerant -B OUTLET econdary luid ILET efrigerant - ILET econdary luid OUTLET efrigerant -B OUTLET econdary luid PEIIATIO 09 09H PEIIATIO 22 22H PEUE AE (bar) Vacuum to 30 Vacuum to 45 oldering Threaded M Threaded otalock PEUE AE (bar) Vacuum to 30 Vacuum to 45 oldering Threaded M Threaded otalock -100 to +1-100 to +1 MAXIMUM OETIO AVAILABLE (mm) 18 18 MAXIMUM LOW ATE (m3/h) 5,22 5,22 VOLUME / HAEL (liters) 0.047 0.047 DIMEIO (mm) 80 x 328 80 x 328 8 22 2 19 12 I2 25 I13 22 14 16 30 18 I22 19 I -100 to +1-100 to +1 MAXIMUM OETIO AVAILABLE (mm) 18 18 MAXIMUM LOW ATE (m3/h) 5,22 5,22 VOLUME / HAEL (liters) 0.064 0.064 DIMEIO (mm) 80 x 456 80 x 456 8 22 2 19 12 I2 25 I13 22 14 16 30 18 I22 19 I LEHT ALULATIO (mm) x 2,45 + 8 x 2,45 + 8 WEIHT ALULATIO (kg) x 0.09 + 1 x 0.09 + 1 tandard connections: 18-22 LEHT ALULATIO (mm) x 2,45 + 8 x 2,45 + 12 WEIHT ALULATIO (kg) x 0.13 + 1,5 x 0.13 + 3,5 tandard connections: 18-22 AME H DEI umber of plates umber of plates oldering onnections otalock onnections Male oldering onnections otalock onnections Male PLATE HEAT EXHAE MATEIAL tainless teel 316L Thickness 0.35 mm PLATE HEAT EXHAE MATEIAL tainless teel 316L Thickness 0.35 mm EV 1.0-14 EV 1.0-14 6 7
12 ILE IUIT Advanced 16 ILE IUIT Heat Exchangers 1 116 64 LEHT 50 LEHT 242 298 2 M8x25 150 250 312 2 M8x25 150 B B B B 12 12 ILET efrigerant - ILET econdary luid OUTLET efrigerant -B OUTLET econdary luid ILET efrigerant - ILET econdary luid OUTLET efrigerant -B OUTLET econdary luid PEIIATIO 12 12H PEIIATIO 16 16H PEUE AE (bar) Vacuum to 30 Vacuum to 45-100 to +1-100 to +80 MAXIMUM OETIO AVAILABLE (mm) 30,1 30,1 MAXIMUM LOW ATE (m3/h) 14,07 14,07 VOLUME / HAEL (liters) 0.072 0,072 DIMEIO (mm) 1 x 298 1 x 298 LEHT ALULATIO (mm) x 2,45 + 8 x 2,45 + 12 WEIHT ALULATIO (kg) x 0.112 + 1,7 x 0.112 + 4 oldering Threaded M Threaded rooved otalock 8 22 2 V32 19 12 I22 7 BV32 25 I13 32 V40 32 14 I 42 BV40 44 16 32 I2 18 I32 I7 22 42 I32 28 I42 I29 30 22 32 42 tandard onnections: 22 28-32 PEUE AE (bar) Vacuum to 30 Vacuum to 45-100 to +1-100 to +80 MAXIMUM OETIO AVAILABLE (mm) 34 34 MAXIMUM LOW ATE (m3/h) 14,07 14,07 VOLUME / HAEL (liters) 0.07 0,07 DIMEIO (mm) 312 X 116 312 X 116 LEHT ALULATIO (mm) x 2,35 + 8 x 2,35 + 12 WEIHT ALULATIO (kg) x 0.11 + 1,7 x 0.11 + 4 oldering Threaded M Threaded rooved otalock 8 22 2 V32 19 12 I22 7 BV32 25 I13 32 32 14 I I2 16 32 I7 18 I32 I32 22 22 28 I29 32 30 tandard onnections: 22 28-32 umber of plates umber of plates V-BV oldering onnections rooved ystem for tandard lexible oupling otalock onnections Male V-BV oldering onnections rooved ystem for tandard lexible oupling otalock onnections Male PLATE HEAT EXHAE MATEIAL tainless teel 316L Thickness 0.35 mm PLATE HEAT EXHAE MATEIAL tainless teel 316L Thickness 0.3 mm EV 1.0-14 EV 1.0-14 8 9
82-82M ILE IUIT 182 ILE IUIT Advanced Heat Exchangers 197 94 35 LEHT 122 64 LEHT 92 3 230 472 530 2 M8x25 519 622 4 M10x25 B B B B ILET efrigerant - ILET econdary luid OUTLET efrigerant -B OUTLET econdary luid ILET efrigerant - ILET econdary luid OUTLET efrigerant -B OUTLET econdary luid PEIIATIO 82 82H PEIIATIO 182 182H PEUE AE (bar) Vacuum to 30 Vacuum to 45-100 to +1-100 to +1 MAXIMUM OETIO AVAILABLE (mm),9,9 MAXIMUM LOW ATE (m3/h) 23,6 23,6 VOLUME / HAEL (liters) 0,113 0,113 DIMEIO (mm) 122 x 530 122 x 530 LEHT ALULATIO (mm) x 2,25 + 8 x 2,25 + 12 WEIHT ALULATIO (kg) x 0.6 + 2,5 x 0.6 + 6,5 oldering Threaded M Threaded rooved otalock 8 22 2 V32 19 12 I22 7 BV32 25 I13 32 V40 32 14 I 42 BV40 44 16 32 I2 18 I32 I7 22 42 I32 28 I42 I29 30 22 3 42 tandard onnections: 22 30-42 PEUE AE (bar) Vacuum to 30 Vacuum to 45-100 to +1-100 to +1 MAXIMUM OETIO AVAILABLE (mm) 57 57 MAXIMUM LOW ATE (m3/h) 50 50 VOLUME / HAEL (liters) 0,24 0,24 DIMEIO (mm) 197 x 622 197 x 622 LEHT ALULATIO (mm) x 2,45 + 8 x 2,45 + 8 WEIHT ALULATIO (kg) x 0,5 + 11 x 0,5 + 11 oldering Threaded M Threaded rooved otalock 22 48 2 V50 32 28 I48 48 V65 44 I29 60 60 V72 58 35 I60 I2 I41 48 I7 42 60 I32 54 70 60 tandard onnections: 35 54-60 AME H DEI umber of plates umber of plates V-BV oldering onnections rooved ystem for tandard lexible oupling otalock onnections Male V-BV oldering onnections rooved ystem for tandard lexible oupling otalock onnections Male PLATE HEAT EXHAE MATEIAL tainless teel 316L Thickness 0.35 mm PLATE HEAT EXHAE MATEIAL tainless teel 316L Thickness 0.35 mm EV 1.0-14 EV 1.0-14 10 11
2 ILE IUIT 404 ILE IUIT 245 305 Advanced Heat Exchangers 160 35 LEHT 178 35 LEHT 100 100 442 5 4 M10x25 140 6 745 4 M10x25 140 51.5 B 110 22 22 LEHT+100 Ø11 B 0 96 B LEHT+100 Ø14 B ILET efrigerant - ILET econdary luid OUTLET efrigerant -B OUTLET econdary luid ILET efrigerant - ILET econdary luid OUTLET efrigerant -B OUTLET econdary luid 404 PEIIATIO 2 2H PEIIATIO 404 PEUE AE (bar) Vacuum to 30 Vacuum to 45 oldering Threaded M Threaded rooved otalock PEUE AE (bar) Vacuum to 30 oldering Threaded M Threaded rooved otalock langes -100 to +1-100 to +1 MAXIMUM OETIO AVAILABLE (mm) 57 57 MAXIMUM LOW ATE (m3/h) 50,62 50,62 VOLUME / HAEL (liters) 0,254 0,254 DIMEIO (mm) 245 x 5 245 x 5 LEHT ALULATIO (mm) x 2,45 + 4 x 2,45 + 8 WEIHT ALULATIO (kg) x 0.406 + 9,2 x 0.406 + 18 22 48 2 V50 32 28 I48 7 V65 44 I29 60 48 V72 58 35 I60 60 I41 48 I2 42 60 I7 54 70 I32 60 tandard onnections: 35 54-60 -100 to +1 MAXIMUM OETIO AVAILABLE (mm) 84,7 MAXIMUM LOW ATE (m3/h) 111,68 VOLUME / HAEL (liters) 0,56 DIMEIO (mm) 305 x 745 LEHT ALULATIO (mm) x 2,95 + 8 WEIHT ALULATIO (kg) x 0,7 + 30 54 76 2 V73 58 80 64 I73 7 V80 I65 90 I2 V90 76 I90 I7 I80 76 I32 90 90 I92 tandard onnections: 54 76-90 umber of plates umber of plates V-BV oldering onnections rooved ystem for tandard lexible oupling otalock onnections Male V-BV oldering onnections rooved ystem for tandard lexible oupling otalock onnections Male PLATE HEAT EXHAE MATEIAL tainless teel 316L Thickness 0.35 mm PLATE HEAT EXHAE MATEIAL tainless teel 316L Thickness 0.35 mm EV 1.0-14 EV 1.0-14 12 13
606-606M ILE IUIT 222 DUAL IUIT 5 Advanced Heat Exchangers 229 35 LEHT 245 166 35 LEHT 100 100 2 39.5 154 2 700 850 4 M12x25 140 435 450 5 4 M10x25 140 100 B Ø16.5 B 2 B 1 110 178 37.5 51.5 22 22 LEHT+100 156 Ø11 B 1 240 25 25 LEHT+140 ILET efrigerant - ILET econdary luid OUTLET efrigerant -B OUTLET econdary luid ILET efrigerant ircuit 1 OUTLET efrigerant ircuit 1 1 ILET efrigerant ircuit 2 2 OUTLET efrigerant ircuit 2 ILET econdary luid OUTLET econdary luid - B onnections for ensor PEIIATIO 606 PEIIATIO 222 222H PEUE AE (bar) Vacuum to oldering Threaded M Threaded rooved langes PEUE AE (bar) Vacuum to 30 Vacuum to 45 oldering Threaded M Threaded rooved otalock -100 to +1 MAXIMUM OETIO AVAILABLE (mm) 110,1 MAXIMUM LOW ATE (m3/h) 188,41 VOLUME / HAEL (liters) 0,79 DIMEIO (mm) 5 x 850 LEHT ALULATIO (mm) x 2,95 + 8 WEIHT ALULATIO (kg) x 1 + 35 54 76 2 V73 00 64 I73 7 V80 80 I65 90 I2 V90 76 I90 I7 V100 I80 100 I32 90 I100 I92 76 100 90 100 tandard onnections: 76 100 - V100-100 to +1-100 to +1 MAXIMUM OETIO AVAILABLE (mm) 57 57 MAXIMUM LOW ATE (m3/h) 50,62 50,62 VOLUME / HAEL (liters) 0,223 0,223 DIMEIO (mm) 245 x 5 245 x 5 LEHT ALULATIO (mm) x 2,45 + 4 x 2,45 + 8 WEIHT ALULATIO (kg) x 0.406 + 9,2 x 0.406 + 18 22 48 2 V50 32 28 I48 7 V65 44 I29 60 I2 V72 58 30 I60 I7 42 I41 50 48 60 tandard onnections -1 28-2 42-60 -B 2 umber of plates oldering onnections V-BV rooved ystem for tandard lexible oupling otalock onnections Male PLATE HEAT EXHAE MATEIAL tainless teel 316L Thickness 0.35 mm umber of plates oldering onnections V - BV rooved ystem for tandard lexible oupling otalock onnections Male PLATE HEAT EXHAE MATEIAL tainless teel 316L Thickness 0.35 mm riss-ross low Pattern Available on equest EV 1.0-14 EV 1.0-14 14 15
Metric onnections 424 DUAL IUIT 305 193 35 LEHT oldering connections 100 2 55 247.5 2 OD 8 OD 12 OD 14 OD 16 1/2" 5/8" OD 18 3/4'' 8 12 14 16 18 19 610 6 745 4 M10x25 140 OD 35 250.5 OD 22 7/8" OD 22 OD 28 7/8" 1-1/8" OD 35 1-3/8" 1-3/8" 2 B 110 1 52 51.5 22 22 Ø11 B 1 22 28 30 35 198 LEHT+100 ILET efrigerant ircuit 1 OUTLET efrigerant ircuit 1 1 ILET efrigerant ircuit 2 2 OUTLET efrigerant ircuit 2 ILET econdary luid OUTLET econdary luid - B onnections for ensor PEIIATIO 424 424H PEUE AE (bar) Vacuum to 30 Vacuum to 45-100 to +1-100 to +1 MAXIMUM OETIO AVAILABLE (mm) 84,7 84,7 MAXIMUM LOW ATE (m3/h) 111,68 111,68 VOLUME / HAEL (liters) 0,484 0,484 DIMEIO (mm) 305 x 745 305 x 745 LEHT ALULATIO (mm) x 2,95 + 8 x 2,95 + 12 WEIHT ALULATIO (kg) x 0,7 + 30 x 0,7 + 45 oldering Threaded M Threaded rooved otalock langes 30 76 2 V73 44 80 42 I73 7 V80 58 65 54 90 I2 V90 64 I90 I7 I65 76 76 90 I80 90 tandard onnections: -1 54-2 76-90 -B 2 OD 54 OD 42 OD 54 2-1/8" OD 64 1-5/8" 2-1/8" 42 50 54 60 OD 64 OD 76 OD 90 64 76 90 umber of plates oldering onnections V - BV rooved ystem for tandard lexible oupling otalock onnections Male PLATE HEAT EXHAE MATEIAL tainless teel 316L Thickness 0.35 mm OD 102 100 riss-ross low Pattern Available on equest EV 1.0-14 EV 1.0-14 16 17
Metric onnections Metric onnections as thread connections female as thread connections male cylindrical 1/2'' 3/4'' 1'' 1/2'' (ilind.) Ø12 3/4 (ilind.) Ø16 1'' (ilindrico) Ø22 1'' 1/4 (ilindrico) Ø28 2 7 32 22 32 42 1'' 1/4 1''1/2 2'' 1''1/2 (ilindrico) 2'' (ilindrico) 2'' 1/2 (ilindrico) Ø35 42 48 60 48 60 70 as thread connections Male conical 2'' 1/2 (ilindrico) 3'' (ilindrico) 4'' (ilindrico) Ø100 40 1/2'' (onico) Ø14 3/4'' (onico) Ø18 1'' (onico) 1'' 1/4 (onico) 76 90 100 22 32 42 1''1/2 (onico) 2'' (onico) 2'' 1/2 (onico) otalock connections Male 1'' 1/4 U 3/4'' U 1'' U 48 60 76 19 25 32 3'' (onico) 4'' (onico) Ø100 1'' 3/4 U 2'' 1/4 U Ø41 40 90 100 44 58 EV 1.0-14 EV 1.0-14 18 19
Metric onnections Metric onnections V-BV rowed fittings ompact lange Ø169 Ø145 D32 Ø35 1-3/8" D32 Ø35 1-3/8" D40 D40 Ø144 n 100 Ø118 Ø101 15 15 40 40 47 8x n 13 47 8x n 13 V32 BV32 V40 BV40 D 65 Ø76.1 Ø64 Ø73 00 Ø128 Ø106 Ø89 80 Ø128 Ø106 Ø89 D50 Ø64 47 8x n 13 47 8x n 13 47 V50 V65 V72 65 66 D 80 Ø73 Ø89 Ø101.6 DI lange Ø64 Ø76 Ø90.5 3" 3-9/16" Ø2 Ø180 Ø158 V73 V80 V90 53 22 8x n 18 D 100 Ø114.3 Ø102 4" 00 Ø0 Ø160 Ø1 51 V100 Ø185 Ø145 Ø117 8x n 18 80 48 8x n 18 EV 1.0-14 EV 1.0-13 EV 1.0-14 65 21
Inches onnections Inches onnections -I oldering connections I PT Threaded connections Male I13 I29 I41 I92 otalock connections Male I PT Threaded connections emale EV 1.0-14 EV 1.0-14 22 23
Inches onnections V-BV rooved fittings I AI Lap Joint flanges 300 lb/sq.in. EV 1.0-14 24 25
Advanced Heat Exchangers EV 1.0-14 26 EV 1.0-14
Advanced Heat Exchangers Onda spa Headquarters via Lord Baden Powell, 11 36045 Lonigo (VI) Italy T. +39 0444 77. +39 0444 7721 www.onda-it.com onda@onda-it.com Plate Division via Vittoria, 158 A 36065 Mussolente (VI) Italy T. +39 0424 87633. +39 0424 87744 Onda rance.a..l. 3, Avenue Berthelot 69371 Lyon rance T. +33 4784606 M. +33 6 08341000 abouzat@onda-fr.com www.onda-fr.com ODA U Mayakovskogo treet, 18A Khimki, Moscow egion UIA 141400 T. +7.495.97 188 53 M. +7.916.676.16.54 oleg.pryanichnikov@onda-ru.com www.onda-ru.com ODA UA LL 690 Hadley Dr. olumbus, Oh 43228 T. +1 614 321 3342 M. +1 312 806 1480 onda@onda-us.com www.onda-us.com