Machine for Industrial Applications LH M litronic` : 7, 7,9 kg Engine: 3 kw / 313 HP Stage IIIB / Tier i Max. Syste Perforance: 3 kw
Technical Data Engine Rating per ISO 99 Model Type Bore/Stroke Displaceent Engine operation Harful eissions values Eission control Cooling Air cleaner Fuel tank Engine idling Electrical syste Voltage Batteries Alternator Power distribution Hydraulic Controls Servo circuit Attachent and swing Travel Additional functions Option 3 kw (313 HP) at 1,7 RPM Liebherr D93 according to stage IIIB / Tier i cylinder in-line 1/1 1. l -stroke diesel Coon-Rail turbo-charged and aer-cooled reduced eissions in accordance with 97//EG stage IIIB Liebherr particle filter water-cooled with integrated otor oil cooler dry-type air cleaner with pre-cleaner, priary and safety eleents 91 l sensor controlled V x 17 Ah/1 V three phase current V/1 A via control valves in single block with integrated safety valves with hydraulic pilot control and proportional joystick levers electroproportional via foot pedal via switch or electroproportional foot pedals proportional control, proportionally acting transitters on the joysticks for additional hydraulic functions Hydraulic Syste Hydraulic pup for attachent and travel drive Max. flow Max. pressure Hydraulic pup regulation and control Hydraulic pup for swing drive Max. flow Max. pressure Hydraulic tank Hydraulic syste Hydraulic oil filter Hydraulic oil cooler MODE selection S (Sensitive) E (ECO) P (Power) Tool Control (Option) two Liebherr variable flow, swashplate pups (double construction) x 3 l/in. 3 bar electro-hydraulic with electronic engine speed sensing regulation, pressure copensation, flow copensation, autoatic oil flow optiizer reversible, variable flow, swashplate pup, closedloop circuit 1 l/in. 3 bar 39 l 91 l ain return filters with integrated partial icro filtration ( μ) cooling syste, consisting of a cooling unit for water and charge air and a nd cooler for hydraulic oil, each with an infinitely variable, therostatically controlled fan drive syste adjustent of engine and hydraulic perforance via a ode pre-selector to atch application, e.g. for especially econoical and environentally friendly operation or for axiu aterial handling and heavy-duty jobs for precision work and liing through very sensitive oveents for especially econoical and environentally friendly operation for axiu digging power and heavy duty jobs ten preadjustable pup flows and pressures for add on tools Swing Drive Drive Liebherr swashplate otor in a closed syste with integrated brake valve Transission Liebherr planetary reduction gear Swing ring Liebherr, sealed single race ball bearing swing ring, internal teeth Swing speed. RPM stepless Swing torque 1 kn Brake holding brake (spring applied pressure released) Option pedal controlled positioning swing brake LH M Litronic Machine for Industrial Applications
Technical Data Type Cab Operator s Cab Operator s seat Standard Operator s seat Cofort (Option) Operator s seat Preiu (Option) Control syste Operation and displays Air-conditioning Uppercarriage slewing platfor ade fro high-strength steel plate, designed for the toughest requireents safety cab structure with individual windscreens or featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a side window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspension, sounddaping insulating, tinted lainated safety glass, separate shades for the sunroof window and windscreen air cushioned operator s seat with headrest, lap belt, seat heater, anual weight adjustent, adjustable seat cushion inclination and length and echanical lubar vertebrae support in addition to operator s seat standard: lockable horizontal suspension, autoatic weight adjustent, adjustable suspension stiffness, pneuatic lubar vertebrae support and passive seat cliatisation with active coal in addition to operator s seat cofort: active electronic weight adjustent (autoatic readjustent), pneuatic low frequency suspension and active seat cliatisation with active coal and ventilator joysticks with ar consoles and swivel seat large high-resolution operating unit, selfexplanatory, colour display with touchscreen, video-copatible, nuerous setting, control and onitoring options, e.g. air conditioning control, fuel consuption, achine and tool paraeters autoatic air-conditioning, recirculated air function, fast de-icing and deisting at the press of a button, air vents can be operated via a enu; recirculated air and fresh air filters can be easily replaced and are accessible fro the outside; heating-cooling unit, designed for extree outside teperatures, sensors for solar radiation, inside and outside teperatures Noise eission ISO 39 L pa (inside cab) = 71 db(a) /1/EC L WA (surround noise) = 1 db(a) Type Drive Travel speed Driving operation Axles Service brake Holding brake Stabilization Type Undercarriage Attachent Hydraulic cylinders Energy recovering cylinder Bearings Lubrication Coplete Machine torsion-resistant box design ade fro high-strength steel plate, designed for the toughest requireents variable flow swashplate otor with autoatic brake valve 1 k/h stepless autootive driving using accelerator pedal, cruise control function: storage of variable accelerator pedal positions 9 t drive axles; anual or autoatic hydraulically controlled front axle oscillation lock two circuit travel brake syste with accuulator; aintenance-free, wet and backlash-free disc brake wet, aintenance-free ulti disc brakes point outriggers high-strength steel plates at highlystressed points for the toughest requireents. Coplex and stable ountings of attachent and cylinders Liebherr cylinders with special seal syste. Shock absorption Liebherr gas cylinder with special sealing and control syste sealed, low aintenance central lubrication syste for uppercarriage and attachent, autoatically LH M Litronic Machine for Industrial Applications 3
Diensions 391 3 3193 3 9 37 39 3 177 1 17 3 77 7 1 3 39 Choice of Cab Elevation Cab Elevation LFC (Rigid Elevation) Cab Elevation LHC (Hydraulic Elevation) D D1 D C B C B C1 B1 E H Increase type LFC 1 LFC 1 LFC Height 1, 1,, B,,9, C,3,3,3 D 1,1 1,1 1,1 A rigid cab elevation has a fixed eye level height. For a lower transport height, the shell of the cab can be reoved and replaced by a transport device. The diension C is in this achine design for all rigid cab elevations,33. Tyres 3. x Increase type LHC LHC 3-3 LHC 3 B1 3,7 3,39 3,9 B,3 7, 7, C1,3,3,3 C,77 7,79,11 D1 1,711,, D 1,37, 3,3 E 3,971,31,11 The hydraulically adjustable cab allows the driver, that he can choose his field of view freely and at any tie within the stroke. LH M Litronic Machine for Industrial Applications
Attachent GA1 Kineatic A 7 3 3 1 1-1 H71 1 1 1 1 1 The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type straight ono boo 1. and industrial-type angled stick 7.. with grapple odel GMM /1.7 3 sei-closed tines Diensions 39 11 H7 7, kg 3-1 1 1 1 1 3 3 1 1. 7. 9. 1. 1. 13. 1. 1. 1. 19. 1. Undercarriage 19. pt. outriggers down 1.* 1.* 1.9* 1.9* 7.1 1. pt. outriggers down 1.* 1.* 1.* 1.* 1.* 1.* 9.9 1. pt. outriggers down 1.7* 1.7* 1.* 1.* 1.* 1.* 9.* 9.* 11.9 1. pt. outriggers down 1.* 1.* 13.* 13.* 1.1* 1.1*.*.* 13. 13. pt. outriggers down 1.3* 1.3* 13.7* 13.7* 1.* 1.* 11.* 11.*.*.* 1. 1. pt. outriggers down 1.* 1.* 13.* 13.* 1.* 1.* 11.* 11.* 1.* 1.*.1*.1* 1. 1. pt. outriggers down 17.3* 17.3* 1.7* 1.7* 13.9* 13.9* 1.* 1.* 11.* 11.* 1.* 1.* 7.9* 7.9* 1.3 9. pt. outriggers down 1.* 1.* 1.1* 1.1* 1.* 1.* 1.* 1.* 11.* 11.* 1.7* 1.7* 9.* 9.* 7.9* 7.9* 1.9 7. pt. outriggers down 19.* 19.* 19.* 19.* 1.7* 1.7* 1.* 1.* 13.1* 13.1* 11.* 11.* 1.* 1.* 9.7 9.* 7.9* 7.9* 17.. pt. outriggers down.*.*.*.* 17.* 17.* 1.1* 1.1* 13.3* 13.3* 1.* 1.* 1.* 1.* 9. 9.* 7.9* 7.9* 17.7. pt. outriggers down 7.* 7.* 1.* 1.* 1.1* 1.1* 1.* 1.* 13.* 13.* 1.1* 1.1* 1.9* 1.9* 9. 9.7*.1*.1* 17.9 3. pt. outriggers down.*.*.7*.7* 1.7* 1.7* 1.9* 1.9* 13.* 13.* 1.* 1.* 1. 1.* 9.3 9.*.1*.1* 17.9 1. pt. outriggers down 1.* 1.* 3.* 3.* 19.* 19.* 1.1* 1.1* 13.9* 13.9* 1.* 1.* 1. 1.7* 9. 9.* 7.* 7.* 17. pt. outriggers down 9.* 9.*.9*.9* 1.* 1.* 1.9* 1.9* 13.7* 13.7* 11.9* 11.9* 1.3* 1.3*.*.* 7.* 7.* 17. 1. pt. outriggers down 9.* 9.* 17.* 17.* 1.* 1.* 1.3* 1.3* 13.1* 13.1* 11.* 11.* 9.* 9.* 7.* 7.*.*.* 17. 3. pt. outriggers down 17.* 17.* 1.3* 1.3* 1.* 1.* 11.9* 11.9* 1.1* 1.1*.*.* 7.* 7.* 1.. pt. outriggers down 11.9* 11.9* 1.1* 1.1* 1. Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications
Attachent GA19 Kineatic A 7 3 3 1 1-1 -3 H9 1 1 1 1 1 - -1 1 1 1 1 1 7 3 3 1 1 The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type straight ono boo 1. and industrial-type angled stick 9.. with grapple odel GMM /1.7 3 sei-closed tines Diensions 11 7 H7 7, kg 3. 7. 9. 1. 1. 13. 1. 1. 1. 19. 1. Undercarriage 1. pt. outriggers down 13.1* 13.1* 1.* 1.*. 19. pt. outriggers down 1.9* 1.9* 1.9* 1.9* 9.* 9.* 9.7 1. pt. outriggers down 1.* 1.* 1.9* 1.9*.*.* 11.9 1. pt. outriggers down 13.3* 13.3* 1.* 1.* 1.* 1.* 7.9* 7.9* 7.7* 7.7* 13. 1. pt. outriggers down 13.* 13.* 11.9* 11.9* 1.1* 1.1* 7.* 7.* 1.9 13. pt. outriggers down 1.9* 1.9* 11.* 11.* 1.9* 1.9* 9.3* 9.3*.9*.9* 1. 1. pt. outriggers down 1.9* 1.9* 11.* 11.* 1.* 1.* 1.1* 1.1* 7.9* 7.9*.7*.7* 1.9 1. pt. outriggers down 1.* 1.* 13.1* 13.1* 11.9* 11.9* 1.9* 1.9* 1.1* 1.1* 9.* 9.*.*.* 17. 9. pt. outriggers down 1.1* 1.1* 13.* 13.* 1.1* 1.1* 11.* 11.* 1.* 1.* 9.* 9.* 7.1* 7.1*.*.* 1. 7. pt. outriggers down 1.* 1.* 1.7* 1.7* 13.* 13.* 1.* 1.* 11.* 11.* 1.3* 1.3* 9.* 9.*..*.*.* 1.. pt. outriggers down 1.* 1.* 19.3* 19.3* 1.* 1.* 1.3* 1.3* 1.7* 1.7* 11.* 11.* 1.* 1.* 9.* 9.*.3.*.*.* 1.9. pt. outriggers down.*.*.*.* 17.* 17.* 1.* 1.* 13.* 13.* 11.* 11.* 1.* 1.* 9. 9.*..*.7*.7* 19. 3. pt. outriggers down 7.* 7.* 1.* 1.* 17.9* 17.9* 1.3* 1.3* 13.3* 13.3* 11.* 11.* 1.* 1.* 9.3 9.*..*.*.* 19.1 1. pt. outriggers down 17.* 17.*.*.* 1.* 1.* 1.* 1.* 13.* 13.* 11.9* 11.9* 1.* 1.* 9.1 9.3* 7.9.1*.9*.9* 19. pt. outriggers down 11.1* 11.1*.7*.7* 1.* 1.* 1.7* 1.7* 13.* 13.* 11.* 11.* 1.3 1.3*.9 9.* 7.* 7.*.*.* 1. 1. pt. outriggers down 1.* 1.*.7*.7* 1.3* 1.3* 1.* 1.* 13.* 13.* 11.* 11.* 9.9* 9.9*.*.*.*.*.9*.9* 1. 3. pt. outriggers down 1.* 1.* 1.1* 1.1* 17.3* 17.3* 1.7* 1.7* 1.* 1.* 1.* 1.* 9.1* 9.1* 7.* 7.*.*.* 17.3. pt. outriggers down 17.* 17.* 1.* 1.* 13.* 13.* 11.3* 11.3* 9.* 9.* 7.* 7.* 7.3* 7.3* 1. Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications
Attachent GA Kineatic A 7 7 3 3 1 1-1 -3 H7 1 1 1 1 1 - -1 1 1 1 1 1 7 3 3 1 1 The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type straight ono boo 11. and industrial-type angled stick 9.. with grapple odel GMM /1.7 3 sei-closed tines Diensions 3 11 3 H 77, kg 3. 7. 9. 1. 1. 13. 1. 1. 1. 19. 1. Undercarriage 1. pt. outriggers down 1.* 1.* 1.3* 1.3*.9 19. pt. outriggers down 1.3* 1.3* 1.* 1.*.*.* 11. 1. pt. outriggers down 13.1* 13.1* 1.* 1.* 1.* 1.* 7.9* 7.9* 13. 1. pt. outriggers down 1.* 1.* 11.* 11.* 1.1* 1.1* 7.* 7.* 1.9 1. pt. outriggers down 1.7* 1.7* 11.* 11.* 1.* 1.* 9.* 9.* 7.1* 7.1* 1.1 13. pt. outriggers down 1.7* 1.7* 11.* 11.* 1.* 1.* 9.* 9.*.*.*.*.* 17. 1. pt. outriggers down 1.* 1.* 1.* 1.* 11.* 11.* 1.* 1.* 9.* 9.*.9*.9*.7*.7* 1. 1. pt. outriggers down 1.* 1.* 13.* 13.* 11.7* 11.7* 1.* 1.* 9.* 9.*.9*.9*.*.*.*.* 1. 9. pt. outriggers down 1.1* 1.1* 1.* 1.* 13.3* 13.3* 11.9* 11.9* 1.7* 1.7* 9.7* 9.7*.9*.9*.*.*.*.* 19. 7. pt. outriggers down 1.* 1.* 17.* 17.* 1.7* 1.7* 13.7* 13.7* 1.1* 1.1* 1.* 1.* 9.* 9.* 9.* 9.*.*.*.*.*.*.* 19.. pt. outriggers down.3*.3* 19.* 19.* 1.3* 1.3* 1.1* 1.1* 1.* 1.* 11.* 11.* 9.9* 9.9* 9.* 9.*..*.9 7.3*.*.* 19.. pt. outriggers down.9*.9*.*.* 1.9* 1.9* 1.* 1.* 1.* 1.* 11.* 11.* 1.* 1.* 9.* 9.* 7.9.1*. 7.1*..7*. 3. pt. outriggers down 1.7* 1.7* 1.* 1.* 17.* 17.* 1.* 1.* 1.* 1.* 11.3* 11.3* 1.* 1.*.9 9.* 7.7.*.7.9*.*.*. 1. pt. outriggers down 7.7* 7.7* 1.* 1.* 17.7* 17.7* 1.9* 1.9* 1.9* 1.9* 11.3* 11.3* 1.* 1.*.7.9* 7. 7.*.*.*.*.*. pt. outriggers down.*.* 1.* 1.* 17.* 17.* 1.9* 1.9* 1.* 1.* 11.* 11.* 9.* 9.*..* 7.* 7.*.9*.9*.*.* 19. 1. pt. outriggers down.7*.7* 1.* 1.* 17.* 17.* 1.* 1.* 1.* 1.* 1.* 1.* 9.* 9.*.1*.1*.*.*.*.* 19. 3. pt. outriggers down 7.* 7.* 1.3* 1.3* 1.* 1.* 13.* 13.* 11.7* 11.7* 1.1* 1.1*.7*.7* 7.3* 7.3*.7*.7*.*.* 1.3. pt. outriggers down 1.7* 1.7* 13.9* 13.9* 1.1* 1.1* 1.* 1.* 9.* 9.* 7.* 7.*.*.* 1. Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications 7
Attachent GA1 Kineatic A 7 H 7 1 1 3 3 1 1 1 1 1-1 - -3-1 1 1 1 1 1 7 7 3 3 1 1 The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type straight ono boo 1. and industrial-type angled stick 9.. with grapple odel GMM /1. 3 sei-closed tines Diensions 39 171 91 H 77,7 kg 3. 7. 9. 1. 1. 13. 1. 1. 1. 19. 1. Undercarriage. pt. outriggers down. pt. outriggers down 11.9* 11.9* 11.* 11.* 7.9 1. pt. outriggers down 13.3* 13.3* 1.* 1.* 1.* 1.* 9.* 9.* 11. 19. pt. outriggers down 1.9* 1.9* 11.* 11.* 1.* 1.*.*.* 13.1 1. pt. outriggers down 13.* 13.* 1.7* 1.7* 11.3* 11.3* 1.* 1.* 7.* 7.* 1. 1. pt. outriggers down 1.* 1.* 11.* 11.* 1.1* 1.1* 9.3* 9.3* 7.* 7.* 1. 1. pt. outriggers down 1.* 1.* 11.* 11.* 1.1* 1.1* 9.* 9.*.*.*.9*.9* 17.3 13. pt. outriggers down 1.3* 1.3* 1.* 1.* 11.* 11.* 1.1* 1.1* 9.* 9.*.*.* 7.* 7.*.7*.7* 1.3 1. pt. outriggers down 1.* 1.* 1.7* 1.7* 11.3* 11.3* 1.1* 1.1* 9.* 9.*.*.* 7.7* 7.7*.*.* 19.1 1. pt. outriggers down 1.9* 1.9* 1.9* 1.9* 11.* 11.* 1.* 1.* 9.3* 9.3*.*.* 7.7* 7.7*.9 7.*.*.* 19.7 9. pt. outriggers down 1.3* 1.3* 1.* 1.* 13.* 13.* 11.* 11.* 1.3* 1.3* 9.3* 9.3*.*.* 7.7* 7.7*.9 7.*..*. 7. pt. outriggers down 1.* 1.* 1.* 1.* 1.7* 1.7* 13.* 13.* 11.* 11.* 1.* 1.* 9.* 9.*.*.* 7.7* 7.7*. 7.*.1.*.. pt. outriggers down.7*.7* 19.* 19.* 1.1* 1.1* 13.7* 13.7* 1.* 1.* 1.* 1.* 9.* 9.*.*.* 7.7* 7.7*.7.9*.9.1*.. pt. outriggers down 1.* 1.*.1*.1* 1.* 1.* 1.* 1.* 1.1* 1.1* 1.7* 1.7* 9.* 9.*.*.* 7. 7.7*..*.7.* 1. 3. pt. outriggers down.*.*.*.* 1.* 1.* 1.* 1.* 1.* 1.* 1.7* 1.7* 9.* 9.*.*.* 7. 7.*..7*.*.*.*.* 1. 1. pt. outriggers down 3.7* 3.7* 1.7* 1.7* 1.* 1.* 1.* 1.* 1.* 1.* 1.7* 1.7* 9.* 9.*..3* 7. 7.*.3.*.1*.1*.9 pt. outriggers down 3.9* 3.9*.*.* 1.* 1.* 13.9* 13.9* 1.* 1.* 1.* 1.* 9.* 9.*..1* 7. 7.1*.*.*.7*.7*. 1. pt. outriggers down.*.*.*.* 1.* 1.* 13.3* 13.3* 11.* 11.* 1.* 1.*.*.* 7.* 7.*.*.*.3*.3*.*.*. 3. pt. outriggers down.*.* 1.1* 1.1* 1.3* 1.3* 1.7* 1.7* 9.* 9.*.1*.1* 7.* 7.*.*.*.*.* 19.3. pt. outriggers down 1.1* 1.1* 1.* 1.* 9.* 9.*.3*.3* 7.1* 7.1*.9*.9*.*.* 17.. pt. outriggers down Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications
Attachent GA Kineatic A 7 7 3 3 1 1-1 -3 H73 1 1 1 1 1 - -1 1 1 1 1 1 The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type straight ono boo 1. and industrial-type angled stick 1.. with grapple odel GMM /1. 3 sei-closed tines Diensions 171 3 H7 7, kg 3 7 7 3 3 1 1. 7. 9. 1. 1. 13. 1. 1. 1. 19. 1. Undercarriage. pt. outriggers down 1.3* 1.3* 11.* 11.*.. pt. outriggers down 1.* 1.*.*.* 1. 1. pt. outriggers down 11.* 11.* 1.* 1.*.*.* 7.7* 7.7* 1.7 19. pt. outriggers down 11.* 11.* 1.* 1.*.7*.7* 7.* 7.* 1. 1. pt. outriggers down 11.7* 11.7* 1.9* 1.9* 9.9* 9.9*.*.*.*.* 1. 1. pt. outriggers down 1.* 1.* 1.* 1.* 9.* 9.*.9*.9* 7.9* 7.9*.*.* 17. 1. pt. outriggers down 1.1* 1.1* 1.* 1.* 9.7* 9.7*.9*.9*.1*.1* 7.* 7.*.*.* 1. 13. pt. outriggers down 1.* 1.* 1.* 1.* 9.7* 9.7*.9*.9*.1*.1* 7.* 7.*.*.* 19. 1. pt. outriggers down 1.3* 1.3* 1.9* 1.9* 9.* 9.*.9*.9*.1*.1* 7.* 7.*.9*.9*.7*.7*.1 1. pt. outriggers down 13.1* 13.1* 1.* 1.* 11.* 11.* 9.9* 9.9*.9*.9*.1*.1* 7.* 7.*.9*.9*.*.*.7 9. pt. outriggers down 1.3* 1.3* 1.7* 1.7* 11.* 11.* 1.* 1.* 9.* 9.*.*.* 7.* 7.*.*.*.9.*.*.* 1. 7. pt. outriggers down 1.* 1.* 1.9* 1.9* 1.1* 1.1* 13.* 13.* 11.* 11.* 1.1* 1.1* 9.1* 9.1*.*.* 7.* 7.*.*.*.9.*..* 1.. pt. outriggers down 1.9* 1.9* 1.7* 1.7* 1.* 1.* 13.3* 13.3* 11.* 11.* 1.3* 1.3* 9.* 9.*.3*.3* 7.* 7.*.7.*..1*..* 1.. pt. outriggers down.*.* 19.* 19.* 1.* 1.* 13.* 13.* 11.* 11.* 1.* 1.* 9.* 9.*.3*.3* 7.* 7.*..*.7.*..* 1.9 3. pt. outriggers down 1.* 1.*.*.* 1.* 1.* 13.* 13.* 11.9* 11.9* 1.* 1.* 9.3* 9.3*.3*.3* 7. 7.*..*..*.1*.1*. 1. pt. outriggers down.*.* 1.9* 1.9* 1.* 1.* 13.9* 13.9* 1.* 1.* 1.* 1.* 9.* 9.*.*.* 7. 7.3*.3.*..*.7*.7* 1.9 pt. outriggers down.*.* 1.* 1.* 1.* 1.* 13.* 13.* 11.9* 11.9* 1.* 1.* 9.1* 9.1*..1* 7. 7.1*.1.*.1*.1*.*.* 1.7 1. pt. outriggers down.*.* 9.1* 9.1* 1.9* 1.9* 13.* 13.* 11.* 11.* 1.1* 1.1*.*.* 7.* 7.*.7*.7*.7*.7*.*.* 3.9* 3.9* 1. 3. pt. outriggers down.*.*.9*.9* 1.9* 1.9* 1.* 1.* 11.* 11.* 9.* 9.*.*.* 7.* 7.*.*.*.*.*.*.*.. pt. outriggers down 9.* 9.* 13.3* 13.3* 11.* 11.* 1.1* 1.1*.*.* 7.* 7.*.*.*.3*.3*.*.* 19.1. pt. outriggers down 11.* 11.* 9.9* 9.9*.7*.7* 7.* 7.*.*.*.3*.3*.*.* 1. Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications 9
Attachent AG19 Kineatic D H7 1 1 1 1 3 1 3 1 1-1 - -3-1 -3-1 1 1 1 1 1 7 3 3 1 1 The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 1. and industrial-type straight stick 9.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions 3 19 9 H7 77, kg 3 1 1. 7. 9. 1. 1. 13. 1. 1. 1. 19. 1. Undercarriage 19. pt. outriggers down 9.* 9.*.7 1. pt. outriggers down 9.1* 9.1*.*.* 11.1 1. pt. outriggers down 1.9* 1.9* 9.* 9.* 7.* 7.* 1.9 1. pt. outriggers down 1.* 1.* 1.* 1.*.*.* 7.* 7.* 1.3 13. pt. outriggers down 1.7* 1.7* 9.9* 9.9* 9.3* 9.3* 7.* 7.*.*.* 1. 1. pt. outriggers down 1.* 1.* 1.* 1.* 9.3* 9.3*.*.*.*.* 1. 1. pt. outriggers down 11.* 11.* 1.1* 1.1* 9.* 9.*.9*.9*.1*.1*.*.* 17.1 9. pt. outriggers down 11.3* 11.3* 1.* 1.* 9.* 9.* 9.* 9.*.*.*.*.* 17.7 7. pt. outriggers down 13.* 13.* 11.* 11.* 1.7* 1.7* 9.* 9.* 9.1* 9.1*.*.*.9*.9*.*.* 1.1. pt. outriggers down 1.3* 1.3* 1.* 1.* 1.* 1.* 11.1* 11.1* 1.1* 1.1* 9.* 9.*.7*.7*.*.*.7*.7* 1.. pt. outriggers down 1.9* 1.9* 17.7* 17.7* 1.* 1.* 13.* 13.* 11.* 11.* 1.* 1.* 9.* 9.*.9*.9*.3*.3*.9*.9* 1. 3. pt. outriggers down.3*.3* 19.* 19.* 1.9* 1.9* 13.7* 13.7* 1.1* 1.1* 1.* 1.* 9.* 9.* 9.* 9.*.1.3* 7.1* 7.1* 1. 1. pt. outriggers down.3*.3*.*.* 1.* 1.* 1.3* 1.3* 1.* 1.* 11.1* 11.1* 1.* 1.* 9.1* 9.1*..3* 7.* 7.* 1. pt. outriggers down 13.* 13.* 1.* 1.* 17.* 17.* 1.* 1.* 1.9* 1.9* 11.* 11.* 1.* 1.* 9. 9.* 7..* 7. 7.* 1.3 1. pt. outriggers down 11.* 11.*.*.* 1.* 1.* 1.* 1.* 13.1* 13.1* 11.* 11.* 1. 1.*. 9.1* 7. 7.9* 1. 3. pt. outriggers down 11.* 11.* 19.3* 19.3* 1.* 1.* 1.* 1.* 13.1* 13.1* 11.* 11.* 1. 1.1*.7.* 7.* 7.* 17.. pt. outriggers down 11.7* 11.7* 1.* 1.* 17.* 17.* 1.9* 1.9* 1.* 1.* 11.1* 11.1* 9.* 9.*.*.* 7.* 7.* 1.9. pt. outriggers down 1.* 1.* 1.* 1.* 1.* 1.* 1.* 1.* 1.* 1.*.*.*.3*.3* 1. 7. pt. outriggers down Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. 1 LH M Litronic Machine for Industrial Applications
Attachent AG19 Kineatic C H3 1 1 3 1 1 1 3 1 1-1 - -3-1 -3-1 -1 1 1 1 1 1 7 3 3 1 1 The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 1. and industrial-type straight stick 9.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions 37 1 9 H 77, kg 3 1 1. 7. 9. 1. 1. 13. 1. 1. 1. 19. 1. Undercarriage 1. pt. outriggers down.*.* 11.1 1. pt. outriggers down 9.* 9.* 7.* 7.* 1.9 1. pt. outriggers down.*.* 7.* 7.* 1.3 13. pt. outriggers down.*.* 7.* 7.*.*.* 1. 1. pt. outriggers down.*.*.1*.1*.*.* 1. 1. pt. outriggers down.*.*.*.* 7.9* 7.9*.*.* 17.1 9. pt. outriggers down 9.* 9.*.*.*.3*.3* 7.9* 7.9*.*.* 17.7 7. pt. outriggers down 1.7* 1.7* 9.* 9.* 9.* 9.*.*.*.*.*.9*.9*.*.* 1.1. pt. outriggers down 1.7* 1.7* 11.3* 11.3* 1.* 1.* 9.* 9.*.7*.7*.*.* 7.* 7.*.7*.7* 1.. pt. outriggers down 19.9* 19.9* 1.* 1.* 13.7* 13.7* 1.* 1.* 1.7* 1.7* 9.* 9.* 9.* 9.*.*.* 7.9* 7.9*.9*.9* 1. 3. pt. outriggers down.*.* 17.* 17.* 1.* 1.* 1.7* 1.7* 11.3* 11.3* 1.* 1.* 9.3* 9.3*.*.*.*.* 7.1* 7.1* 1. 1. pt. outriggers down.3*.3* 19.3* 19.3* 1.* 1.* 13.* 13.* 11.* 11.* 1.* 1.* 9.* 9.*.*.*..1* 7.* 7.* 1. pt. outriggers down 13.* 13.*.*.* 1.7* 1.7* 1.1* 1.1* 1.3* 1.3* 1.9* 1.9* 9.* 9.*.9*.9* 7..1* 7. 7.* 1.3 1. pt. outriggers down 11.* 11.* 1.3* 1.3* 17.* 17.* 1.* 1.* 1.7* 1.7* 11.* 11.* 1.* 1.*. 9.* 7. 7.9* 1. 3. pt. outriggers down 11.* 11.* 19.3* 19.3* 17.* 17.* 1.9* 1.9* 1.* 1.* 11.3* 11.3* 1.* 1.*.7.* 7.9* 7.9* 17.. pt. outriggers down 11.7* 11.7* 1.* 1.* 17.* 17.* 1.* 1.* 1.7* 1.7* 11.1* 11.1* 9.7* 9.7*.*.* 7.* 7.* 1.9. pt. outriggers down 1.* 1.* 1.* 1.* 1.7* 1.7* 1.* 1.* 1.* 1.* 1.* 1.*.9*.9* 7.* 7.* 1.1 7. pt. outriggers down 13.* 13.* 17.* 17.* 1.1* 1.1* 1.9* 1.9* 11.* 11.* 9.* 9.* 7.3* 7.3* 7.* 7.* 1. 9. pt. outriggers down 1.7* 1.7* 9.9* 9.9* 11.1 Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications 11
Attachent AG Kineatic D 7 H77 1 1 3 3 1 1 1 1 1-1 -3 - -1-3 -1 1 1 1 1 1 7 3 3 1 1 The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 11. and industrial-type straight stick 9.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions 3 1 7 H7 77,9 kg 3. 7. 9. 1. 1. 13. 1. 1. 1. 19. 1. Undercarriage 19. pt. outriggers down.*.*.*.* 1. 1. pt. outriggers down 1.* 1.*.7*.7* 7.* 7.* 1.7 1. pt. outriggers down 1.7* 1.7* 9.* 9.*.*.* 7.1* 7.1* 1.3 1. pt. outriggers down 9.7* 9.7*.9*.9*.*.*.9*.9* 1. 13. pt. outriggers down 9.* 9.*.9*.9*.3*.3*.9*.9*.7*.7* 1. 1. pt. outriggers down 1.7* 1.7* 9.7* 9.7* 9.* 9.*.3*.3* 7.* 7.*.*.* 17. 1. pt. outriggers down 1.9* 1.9* 9.9* 9.9* 9.1* 9.1*.*.* 7.9* 7.9*.9*.9*.*.* 1.1 9. pt. outriggers down 1.7* 1.7* 11.3* 11.3* 1.1* 1.1* 9.* 9.*.*.* 7.9* 7.9* 7.* 7.*.*.* 1.7 7. pt. outriggers down 1.* 1.* 13.3* 13.3* 11.7* 11.7* 1.* 1.* 9.* 9.*.7*.7*.*.* 7.* 7.*.*.* 19.1. pt. outriggers down.*.* 1.7* 1.7* 1.1* 1.1* 1.* 1.* 1.* 1.* 9.7* 9.7*.9*.9*.*.* 7.* 7.*.7*.7* 19.. pt. outriggers down.*.* 17.9* 17.9* 1.* 1.* 1.7* 1.7* 11.* 11.* 1.* 1.* 9.1* 9.1*.3*.3* 7.7* 7.7*.9 7.*.9.9* 19. 3. pt. outriggers down 1.1* 1.1* 19.* 19.* 1.* 1.* 13.3* 13.3* 11.* 11.* 1.3* 1.3* 9.3* 9.3*.*.* 7.7* 7.7*. 7.1*.7 7.* 19. 1. pt. outriggers down 1.* 1.*.*.* 1.3* 1.3* 13.7* 13.7* 11.9* 11.9* 1.* 1.* 9.* 9.*.*.* 7. 7.*.7 7.* 19. pt. outriggers down.*.* 17.1* 17.1* 1.* 1.* 1.1* 1.1* 1.* 1.* 1.7* 1.7* 9.* 9.*..* 7. 7.7*.7 7.* 19.3 1. pt. outriggers down.*.* 1.* 1.* 17.* 17.* 1.3* 1.3* 1.3* 1.3* 1.* 1.* 9.* 9.*..* 7.3 7.*..9* 19. 3. pt. outriggers down.*.* 13.* 13.* 1.* 1.* 1.* 1.* 1.3* 1.3* 1.7* 1.7* 9.* 9.*..3* 7.* 7.*.7*.7* 1.. pt. outriggers down 9.* 9.* 13.* 13.* 1.* 1.* 13.* 13.* 11.9* 11.9* 1.* 1.* 9.* 9.* 7.* 7.*.*.* 1.. pt. outriggers down 1.* 1.* 1.* 1.* 1.9* 1.9* 11.* 11.* 9.7* 9.7*.3*.3*.9*.9* 1. 7. pt. outriggers down Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. 1 LH M Litronic Machine for Industrial Applications
Attachent AG Kineatic C H 1 1 3 3 1 1 1 1 1-1 -3 - -1-3 -1-1 1 1 1 1 1 7 3 3 1 1 The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 11. and industrial-type straight stick 9.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions 3 1 7 H 77,9 kg 3. 7. 9. 1. 1. 13. 1. 1. 1. 19. 1. Undercarriage 1. pt. outriggers down.7*.7* 7.* 7.* 1.7 1. pt. outriggers down.*.* 7.1* 7.1* 1.3 1. pt. outriggers down.1*.1* 7.7* 7.7*.9*.9* 1. 13. pt. outriggers down.*.* 7.* 7.*.9*.9*.7*.7* 1. 1. pt. outriggers down.1*.1* 7.* 7.* 7.* 7.*.*.* 17. 1. pt. outriggers down.9*.9*.*.* 7.7* 7.7* 7.3* 7.3*.9*.9*.*.* 1.1 9. pt. outriggers down 9.* 9.*.*.* 7.* 7.* 7.* 7.* 7.* 7.*.*.* 1.7 7. pt. outriggers down 1.* 1.* 9.* 9.*.7*.7*.*.* 7.* 7.* 7.1* 7.1*.*.* 19.1. pt. outriggers down 1.* 1.* 11.1* 11.1* 9.9* 9.9* 9.* 9.*.*.* 7.* 7.* 7.* 7.*.7*.7* 19.. pt. outriggers down.7*.7* 1.* 1.* 13.* 13.* 11.7* 11.7* 1.3* 1.3* 9.3* 9.3*.*.* 7.* 7.* 7.3* 7.3*.*.*.*.* 19. 3. pt. outriggers down 1.1* 1.1* 17.7* 17.7* 1.* 1.* 1.* 1.* 1.* 1.* 9.* 9.*.7*.7*.*.* 7.* 7.*..9*.7.9* 19. 1. pt. outriggers down 1.* 1.* 1.* 1.* 1.3* 1.3* 1.9* 1.9* 11.* 11.* 1.* 1.* 9.* 9.*.*.* 7.* 7.*.7.9* 19. pt. outriggers down.*.* 17.1* 17.1* 1.* 1.* 13.* 13.* 11.* 11.* 1.3* 1.3* 9.* 9.*.3*.3* 7. 7.*.7.9* 19.3 1. pt. outriggers down.*.* 1.* 1.* 1.* 1.* 13.* 13.* 11.9* 11.9* 1.* 1.* 9.3* 9.3*.*.* 7.3 7.*..9* 19. 3. pt. outriggers down.*.* 13.* 13.* 1.* 1.* 13.9* 13.9* 1.* 1.* 1.* 1.* 9.3* 9.3*..3* 7.3* 7.3*.*.* 1.. pt. outriggers down 9.* 9.* 13.* 13.* 1.* 1.* 13.7* 13.7* 11.* 11.* 1.3* 1.3* 9.1* 9.1* 7.9* 7.9*.7*.7* 1.. pt. outriggers down 1.* 1.* 1.* 1.* 1.* 1.* 13.1* 13.1* 11.* 11.* 9.9* 9.9*.*.* 7.* 7.*.*.* 17. 7. pt. outriggers down 1.9* 1.9* 1.9* 1.9* 13.9* 13.9* 1.* 1.* 1.* 1.*.9*.9* 7.* 7.*.*.* 1.3 9. pt. outriggers down 11.7* 11.7* 1.* 1.*.7*.7* 7.3* 7.3* 7.1* 7.1* 13.7 Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications 13
Attachent AG1 Kineatic D 7 3 3 1 1-1 -3-3 H79 1 1 1 1 1 - -1-1 1 1 1 1 1 The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 1. and industrial-type straight stick 9.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions 17 7 H 7, kg 3 7 3 3 1 1. 7. 9. 1. 1. 13. 1. 1. 1. 19. 1. Undercarriage 1. pt. outriggers down 1.* 1.*.7*.7* 9.9 19. pt. outriggers down 1.* 1.*.3*.3* 7.* 7.* 1.3 1. pt. outriggers down 1.* 1.* 9.* 9.*.3*.3* 7.3* 7.3* 1.1 1. pt. outriggers down 9.* 9.*.*.*.*.* 7.* 7.* 1. 1. pt. outriggers down 9.* 9.*.*.* 7.9* 7.9* 7.* 7.*.7*.7* 1.7 13. pt. outriggers down 1.* 1.* 9.* 9.*.*.* 7.9* 7.9* 7.3* 7.3*.*.* 17.7 1. pt. outriggers down 1.7* 1.7* 9.* 9.*.*.* 7.9* 7.9* 7.3* 7.3*.9*.9*.*.* 1. 1. pt. outriggers down 1.9* 1.9* 9.7* 9.7*.*.*.*.* 7.* 7.*.9*.9*.*.* 19. 9. pt. outriggers down 1.9* 1.9* 11.* 11.* 9.9* 9.9*.9*.9*.1*.1* 7.* 7.*.9*.9*.*.*.*.* 19.7 7. pt. outriggers down 19.* 19.* 1.9* 1.9* 13.* 13.* 11.* 11.* 1.* 1.* 9.1* 9.1*.3*.3* 7.* 7.* 7.* 7.*.*.*.3*.3*.1. pt. outriggers down 1.* 1.* 1.* 1.* 13.9* 13.9* 11.9* 11.9* 1.* 1.* 9.3* 9.3*.*.* 7.7* 7.7* 7.1* 7.1*.*.*..3*.3. pt. outriggers down.*.* 17.7* 17.7* 1.* 1.* 1.* 1.* 1.* 1.* 9.* 9.*.*.* 7.* 7.* 7.1* 7.1*.*.*..*. 3. pt. outriggers down.1*.1* 1.* 1.* 1.1* 1.1* 1.* 1.* 11.1* 11.1* 9.* 9.*.7*.7* 7.9* 7.9* 7.* 7.*..*.9.*. 1. pt. outriggers down.*.* 13.3* 13.3* 1.* 1.* 13.1* 13.1* 11.3* 11.3* 9.9* 9.9*.9*.9*.*.* 7.* 7.*.3.*..1*. pt. outriggers down.*.* 1.* 1.* 1.9* 1.9* 13.3* 13.3* 11.* 11.* 1.1* 1.1*.9*.9*.*.* 7.1 7.*..*..*.3 1. pt. outriggers down.*.* 9.* 9.* 1.9* 1.9* 13.* 13.* 11.* 11.* 1.1* 1.1*.9*.9* 7.9.*.9 7.1*.1.*.9.9*. 3. pt. outriggers down.7*.7* 9.9* 9.9* 1.* 1.* 13.* 13.* 11.* 11.* 9.9* 9.9*.*.* 7.7 7.*..*.*.*.*.* 19.. pt. outriggers down 7.* 7.* 1.* 1.* 1.7* 1.7* 1.7* 1.7* 11.* 11.* 9.* 9.*.*.* 7.* 7.*.3*.3*.*.* 19.. pt. outriggers down 13.* 13.* 11.* 11.* 1.3* 1.3* 9.* 9.* 7.* 7.*.7*.7*.7*.7* 17.7 7. pt. outriggers down 9.1* 9.1* 7.9* 7.9* 7.* 7.* 13.7 Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. 1 LH M Litronic Machine for Industrial Applications
Attachent AG1 Kineatic C 7 3 3 1 1-1 -3-3 H7 1 1 1 1 1 - -1-1 -1 1 1 1 1 1 The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 1. and industrial-type straight stick 9.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions 17 7 H 7, kg 3 7 3 3 1 1. 7. 9. 1. 1. 13. 1. 1. 1. 19. 1. Undercarriage 19. pt. outriggers down.3*.3* 7.* 7.* 1.3 1. pt. outriggers down 7.9* 7.9* 7.3* 7.3* 1.1 1. pt. outriggers down 7.7* 7.7* 7.* 7.* 7.* 7.* 1. 1. pt. outriggers down 7.7* 7.7* 7.* 7.*.*.*.7*.7* 1.7 13. pt. outriggers down 7.7* 7.7* 7.* 7.*.7*.7*.*.* 17.7 1. pt. outriggers down 7.* 7.* 7.* 7.*.7*.7*.*.*.3*.3* 1. 1. pt. outriggers down.7*.7* 7.9* 7.9* 7.3* 7.3*.*.*.*.*.1*.1* 19. 9. pt. outriggers down 9.* 9.*.1*.1* 7.* 7.*.9*.9*.*.*.1*.1*.1*.1* 19.7 7. pt. outriggers down 1.* 1.* 1.* 1.* 9.* 9.*.3*.3* 7.* 7.* 7.* 7.*.*.*.1*.1*.*.*.1. pt. outriggers down 19.* 19.* 1.3* 1.3* 1.7* 1.7* 1.9* 1.9* 9.* 9.*.*.* 7.* 7.* 7.1* 7.1*.*.*.*.*.*.*.3. pt. outriggers down 1.* 1.* 1.3* 1.3* 13.* 13.* 11.* 11.* 9.9* 9.9*.*.*.*.* 7.3* 7.3*.7*.7*.3*.3*.*.*. 3. pt. outriggers down.1*.1* 17.* 17.* 1.1* 1.1* 11.9* 11.9* 1.3* 1.3* 9.1* 9.1*.*.* 7.* 7.*.9*.9*.3*.3*.9.*. 1. pt. outriggers down.*.* 13.3* 13.3* 1.7* 1.7* 1.* 1.* 1.7* 1.7* 9.* 9.*.*.* 7.* 7.*.9*.9*.3.*..*. pt. outriggers down.*.* 1.* 1.* 1.* 1.* 1.7* 1.7* 1.9* 1.9* 9.* 9.*.*.* 7.7* 7.7* 7.* 7.*..3*..*.3 1. pt. outriggers down.*.* 9.* 9.* 1.* 1.* 1.9* 1.9* 11.1* 11.1* 9.7* 9.7*.*.* 7.7* 7.7*.9 7.*.1.*.9.*. 3. pt. outriggers down.7*.7* 9.9* 9.9* 1.3* 1.3* 1.9* 1.9* 11.* 11.* 9.* 9.*.*.* 7.7* 7.7*..*.9*.9*.9*.9* 19.. pt. outriggers down 7.* 7.* 1.* 1.* 1.9* 1.9* 1.7* 1.7* 11.* 11.* 9.* 9.*.*.* 7.* 7.*.*.*.*.* 19.. pt. outriggers down.3*.3* 11.* 11.* 1.* 1.* 1.* 1.* 1.* 1.* 9.1* 9.1*.*.*.9*.9*.*.*.*.* 1.3 7. pt. outriggers down 11.9* 11.9* 1.* 1.* 11.* 11.* 9.* 9.*.*.* 7.* 7.*.*.*.1*.1* 17. 9. pt. outriggers down 1.* 1.* 9.* 9.*.*.* 7.1* 7.1*.9*.9*.*.* 1. Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications 1
Attachent AG Kineatic D 7 7 3 3 1 1-1 -3-3 H1 1 1 1 1 1 - -1-1 1 1 1 1 1 The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 1. and industrial-type straight stick 1.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions 17 77 H 7,9 kg 3 7 7 3 3 1 1. 7. 9. 1. 1. 13. 1. 1. 1. 19. 1. Undercarriage. pt. outriggers down.*.* 9. 1. pt. outriggers down.7*.7* 7.3* 7.3* 11.7 19. pt. outriggers down.*.* 7.* 7.*.*.* 13. 1. pt. outriggers down 9.1* 9.1*.3*.3*.9*.9*.*.* 1. 1. pt. outriggers down 9.* 9.*.*.* 7.* 7.*.*.*.*.* 1.7 1. pt. outriggers down 9.* 9.*.1*.1* 7.* 7.* 7.* 7.*.*.* 17. 13. pt. outriggers down 9.* 9.*.*.* 7.* 7.*.9*.9*.*.*.7*.7* 1. 1. pt. outriggers down 9.1* 9.1*.*.* 7.* 7.* 7.* 7.*.*.*.7*.7*.*.* 19. 1. pt. outriggers down 1.* 1.* 9.3* 9.3*.3*.3* 7.* 7.* 7.* 7.*.*.*.1*.1*.*.*.1 9. pt. outriggers down 1.7* 1.7* 9.* 9.*.*.* 7.7* 7.7* 7.1* 7.1*.*.*.1*.1*.7*.7*. 7. pt. outriggers down 1.7* 1.7* 11.* 11.* 9.7* 9.7*.7*.7* 7.9* 7.9* 7.* 7.*.*.*.*.*.7*.7* 1.. pt. outriggers down 19.9* 19.9* 1.9* 1.9* 13.3* 13.3* 11.* 11.* 1.* 1.*.9*.9*.*.* 7.3* 7.3*.7*.7*.*.*.*.*.7.7* 1.. pt. outriggers down 1.* 1.* 1.* 1.* 13.* 13.* 11.* 11.* 1.3* 1.3* 9.1* 9.1*.*.* 7.* 7.*.*.*.3*.3*.7.*..7* 1. 3. pt. outriggers down 1.* 1.* 17.7* 17.7* 1.* 1.* 1.* 1.* 1.* 1.* 9.3* 9.3*.3*.3* 7.* 7.*.9*.9*.3*.3*..*..* 1. 1. pt. outriggers down 7.9* 7.9* 1.* 1.* 1.9* 1.9* 1.* 1.* 1.* 1.* 9.* 9.*.*.* 7.* 7.*.9*.9*.3.3*..7*.3.* 1. pt. outriggers down.*.* 1.7* 1.7* 1.3* 1.3* 1.* 1.* 11.* 11.* 9.7* 9.7*.*.* 7.7* 7.7* 7.* 7.*.1.3*..*.3.* 1. 1. pt. outriggers down.3*.3* 1.7* 1.7* 1.* 1.* 13.* 13.* 11.* 11.* 9.* 9.*.*.* 7.7* 7.7*..9*..*.3.*.9 3. pt. outriggers down.*.* 1.1* 1.1* 1.* 1.* 13.* 13.* 11.1* 11.1* 9.7* 9.7*.*.* 7. 7.*..*.9.9*.3*.3*.. pt. outriggers down 7.* 7.* 1.* 1.* 1.9* 1.9* 1.7* 1.7* 1.9* 1.9* 9.* 9.*.*.* 7.* 7.*.*.*.*.*.1*.1*.. pt. outriggers down 7.* 7.* 1.* 1.* 1.* 1.* 1.* 1.* 1.* 1.* 9.1* 9.1*.*.*.9*.9*.9*.9*.9*.9* 19.3 7. pt. outriggers down 1.* 1.* 11.* 11.* 9.* 9.*.3*.3* 7.* 7.*.1*.1*.7*.7* 17.1 Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. 1 LH M Litronic Machine for Industrial Applications
Attachent AG Kineatic C 7 3 3 1 1-1 -3-3 H9 1 1 1 1 1 - -1-1 -1 1 1 1 1 1 The operating weight includes basic achine with point outriggers, hydr. cab elevation, solid tyres, industrial-type angled ono boo 1. and industrial-type straight stick 1.. with clashell odel GMZ /3. 3 shells for loose aterial Diensions 17 77 H9 7,9 kg 3 7 7 3 3 1 1. 7. 9. 1. 1. 13. 1. 1. 1. 19. 1. Undercarriage 19. pt. outriggers down 7.* 7.*.*.* 13. 1. pt. outriggers down.9*.9*.*.* 1. 1. pt. outriggers down.*.*.*.*.*.* 1.7 1. pt. outriggers down.7*.7*.3*.3*.*.* 17. 13. pt. outriggers down.7*.7*.3*.3*.9*.9*.7*.7* 1. 1. pt. outriggers down.*.*.3*.3*.9*.9*.*.*.*.* 19. 1. pt. outriggers down 7.* 7.*.9*.9*.*.*.*.*.7*.7*.*.*.1 9. pt. outriggers down.*.* 7.* 7.* 7.* 7.*.*.*.*.*.7*.7*.*.*. 7. pt. outriggers down.7*.7* 7.9* 7.9* 7.* 7.*.*.*.1*.1*.7*.7*.*.* 1.. pt. outriggers down 11.9* 11.9* 1.3* 1.3* 9.* 9.*.1*.1* 7.3* 7.3*.7*.7*.*.*.*.*.*.*.*.* 1.. pt. outriggers down 19.* 19.* 1.3* 1.3* 1.* 1.* 1.* 1.* 9.* 9.*.*.* 7.* 7.*.9*.9*.*.*.9*.9*.*.*.*.* 1. 3. pt. outriggers down 1.* 1.* 1.3* 1.3* 13.3* 13.3* 11.* 11.* 9.* 9.*.*.* 7.* 7.* 7.1* 7.1*.*.*.*.*.*.*..* 1. 1. pt. outriggers down 7.9* 7.9* 17.* 17.* 13.9* 13.9* 11.7* 11.7* 1.1* 1.1*.9*.9*.*.* 7.* 7.*.*.*.1*.1*..*.3.* 1. pt. outriggers down.*.* 1.7* 1.7* 1.* 1.* 1.1* 1.1* 1.* 1.* 9.* 9.*.1*.1* 7.3* 7.3*.7*.7*.1*.1*..*.3.* 1. 1. pt. outriggers down.3*.3* 1.7* 1.7* 1.9* 1.9* 1.* 1.* 1.7* 1.7* 9.3* 9.3*.3*.3* 7.* 7.*.7*.7*..1*.3.*.9 3. pt. outriggers down.*.* 1.1* 1.1* 1.* 1.* 1.* 1.* 1.* 1.* 9.* 9.*.3*.3* 7.* 7.*..7*.9.9*.*.*.. pt. outriggers down 7.* 7.* 1.* 1.* 1.* 1.* 1.* 1.* 1.* 1.* 9.* 9.*.3*.3* 7.3* 7.3*.*.*.*.*.3*.3*.. pt. outriggers down 7.* 7.* 1.* 1.* 1.* 1.* 1.1* 1.1* 1.* 1.* 9.1* 9.1*.*.* 7.* 7.*.1*.1*.*.* 19.3 7. pt. outriggers down.*.* 11.* 11.* 13.* 13.* 11.* 11.* 9.9* 9.9*.*.* 7.* 7.*.*.*.3*.3*.9*.9* 1. 9. pt. outriggers down 1.* 1.* 11.* 11.* 1.1* 1.1*.*.* 7.7* 7.7*.*.*.*.*.*.* 17. 1. pt. outriggers down.3*.3* 7.3* 7.3*.*.*.9*.9* 13.9 Height Can be slewed through 3 In longitudinal position of undercarriage Max. reach * Liited by hydr. capacity The li capacities on the stick end without attachent are stated in etric tons (t) and are valid on a fir, level supporting surface with blocked oscillating axle. These capacities can be slewed through 3 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the rigid axle with the stabilizers down. Indicated loads coply with the ISO 17 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. The li capacity values indicated are attained at the corresponding operating teperature. This operating teperature is ensured by continuous oveent of the boo. Weights of fitted working tools (grabs, load hooks, etc.) and load accoodation equipent are to be deducted fro the li capacity values. The li capacity of the unit is liited by its stability, the liing capability of the hydraulic eleents, or the axiu perissible liing capacity of the load hook. In accordance with the haronised European Standard EN 7, hydraulic excavators used for liing operations ust be equipped with pipe fracture safety valves, an overload warning device, a load hook and a li capacity chart. LH M Litronic Machine for Industrial Applications 17
Kineatic Variants Kineatic Variant A Hole A A H Hole Energy recovery with kineatic variant A Kineatic Variant D/C Hole D D Hole C C Hole H Hole H7 Energy recovery with kineatic variant D Energy recovery with kineatic variant C D H7 C H71 Altered range curve with additional reach depth, e.g. for unloading fro ships 1 LH M Litronic Machine for Industrial Applications
Variety of Tools Shells for Loose Material Shells for loose aterial with cutting edge (without teeth) Clashell odel GMZ (direct attached, two-otor, single-piece, protective device echanic, XHD suspension) Cutting width of shells 1,3 1, 1,7, Capacity 3 3. 3... For loose aterial, specific weight up to t/ 3 1. 1.3 1. 1. Weight kg,1,3,77,9 Multiple Tine Grapples Grapple odel GMM, tines (direct attached, two-otor, single-piece, XHD suspension) open sei-closed closed Capacity 3 1.1 1. 1.7 1.1 1. 1.7 1.1 1. Weight kg 1,9 1,93 1,99,9,1,1,3 Grapple odel GMM, tines (direct attached, two-otor, single-piece, XHD suspension) open sei-closed closed Capacity 3 1.1 1. 1.7 1.1 1. 1.7 1.1 1. 1.7 Weight kg,17,,9,39,,,,,7 Wood Grapple Grapple odel GMH (direct attached, XHD suspension reinforced, 3, plug-in coupling, two-otor, so start) Claw width 7 7 7 Size 1.9.. Height of grapple, closed 3, 3,77 3, Weight kg,1,3, Load Li Hook Load li hook for industrial stick (direct attached, XHD suspension) Max. load t Height with suspension 1, Weight kg Magnet Devices/Liing Magnets Generator kw 3 Electroagnets with suspension (direct attached) Power kw 11.7 17. Diaeter of agnet 1, 1,7 Weight kg, 3,3 LH M Litronic Machine for Industrial Applications 19
Liebherr ERC-Syste Efficiency as standard ERC Syste More perforance, less consuption Lowering the equipent stores energy in the ERC syste. This stored energy is then ade available to the achine to provide additional engine power. When the equipent is raised the stored energy is released and is reflected in powerful, hoogeneous operating cycles. The result is a clear saving on fuel and, at the sae tie, even greater perforance. 1. Attachent fitting raised / Energy released B. Lower attachent fitting / Store energy. Raise attachent fitting / Release energy 3. Attachent fitting lowered / Energy stored A B A Syste power increased overall power ERC-Syste Engine ERC fuel savings of up to 3 % lower running costs reduced pollutant and noise eissions Power [kw] Syste power The energy recovery cylinder is a storage syste which is independent of the diesel engine. The syste perforance of aterial handling achines fitted with the ERC syste is coposed of the installed engine power and the energy recovery cylinder. When the equipent is raised, energy fro the ERC syste is supplied in addition to the power fro the diesel engine. A ERC perforance Boo position Engine power B Syste perforance LH M Litronic Machine for Industrial Applications