Boomer M-series. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m²

Similar documents
BOOMER M-SERIES. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m 2.

Boomer M2 Battery. Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2

Boomer M2 Battery. Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2

Boomer S2. Robust face drilling rig with a coverage area up to 56 m 2

Boomer E1/E2 series. Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m²

Boomer E1-DH. Diesel-hydraulic face drilling rig for medium to large mines and tunnels with cross sections up to 106 m 2

Boomer E3/E4 series. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²

BOOMER E1/E2 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m²

Boomer L2. Hydraulically controlled face drilling rig with a coverage area up to 104 m²

BOOMER E3/E4 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²

BOOMER E3/E4 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²

Boomer T1. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m²

BOOMER S. Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2

Boomer XL3 D face drilling rig

Boltec S. Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions

Boltec M. A fully mechanized rock bolting rig for bolt lengths from m and heights up to 9.5 meters

Simba S7. Rugged rig with smart design and increased automation made for tight, tough conditions

SIMBA MAIN BENEFITS. FOPS and ROPS approved cab for a safe and comfortable operator environment

High precision solution

Simba M4. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter

Boltec E. Fully mechanized rock bolting rig for bolt lengths from meters, effective in roof heights up to 13 meters

Precise and flexible production drilling

BOOMER T. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2

Boomer 281 face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2

Boomer face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2

SIMBA M6. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter.

BOLTEC M. A fully mechanized rock bolting rig for bolt lengths from m heights up to 9.5 meters

Simba K102 production drill rig. Hydraulic production drill rig for long-hole mining

SIMBA M4. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter.

Easer L. Mobile raiseboring machine for drifts and tunnels from 5.0 m x 5.0 m

FlexiROC T20 R A drill rig for surface- and underground construction

MAIN BENEFITS. Reverse camera to enhance good visibility for the operator when transporting the drill rig

PowerROC T35. Surface drill rig for construction and quarrying Hole diameter: mm (2½" 4½")

SmartROC CL Surface drill rig for open pit mining and selective mining

FlexiROC T15 R Surface drill rig for quarrying and construction

SmartROC D50 and D55 DTH surface drill rig for quarrying and mining

Robbins 91/123. Large-size raise boring machines for holes ranging from 2.4 to 6.0 m (8-20 ft.) in diameter

PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction

PowerROC T25 DC Surface drill rig for drill site construction civil engineering, small aggregate and limestone quarrying.

Scooptram ST7 Battery. Power Unleashed the new Scooptram ST7 Battery is a fully electric powered and automation ready underground loader

FlexiROC T35 & T40 Surface drill rigs for quarrying and construction

SmartROC T45 Surface drill rig for quarrying and construction

PowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying.

MEYCO ME5. Mobile concrete spraying for large sized tunnels

Robbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter

Unigrout Flex S and Flex M. The flexible grouting system to reinforce both underground and on surface construction

Minetruck MT2200. Articulated underground truck with 22-tonne load capacity

FlexiROC D60/D65 Surface drill rig for quarrying and construction

Scooptram ST2G. Underground diesel loader with 4 tonne load capacity

SCOOPTRAM ST7 BATTERY

PowerROC T45. Surface drill rig for quarrying and construction Hole diameter: mm( (3" 5")

Scooptram ST2D. Underground diesel loader with 3.6 tonne load capacity

SpeedROC D30 Surface drill rig for marble, granite, and limestone in the dimension stone industry.

FlexiROC T30 R Quarry Edition Surface drill rig for quarrying and construction

MEYCO ME3. Concrete Spraying Mobile for medium sized tunnels

SmartROC T35 & T40 Surface drill rigs for quarrying and construction

PowerROC T30 E Surface drill rig for quarrying and construction

Scooptram EST1030. Electric underground loader with 10-tonne capacity

FlexiROC T25 R Constrution Edition Surface drill rig for quarrying and construction

Minetruck MT436LP. Underground truck with 32.6-tonne load capacity

SMARTROC D60. Surface drill rig for aggregate and limestone quarries, surface mining and construction. Hole diameter mm (4 5/16 7 )

Diamec Smart 6 Core drilling rig

powerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying.

FlexiROC T30 R Construction Edition Surface drill rig for quarrying and construction

Minetruck MT431B. Underground articulated truck with 28.1-metric tonne load capacity

Scooptram ST7LP. Low-profile underground loader with 6.8-tonne capacity

SmartROC C50 Surface drill rig for quarrying, mining and construction

Scooptram ST14. Underground loader with 14-tonne capacity

FLEXIROC T45. Surface drill rig for quarrying and construction. Folding boom Hole diameter: mm (3½" 5")

SMARTROC T45. Surface drill rig for quarrying and construction. Folding boom Hole diameter: mm (3½ 5 )

ROBBINS 53RH C. Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter

MINETRUCK MT431B. Underground articulated truck with 28.1-metric tonne load capacity

MINETRUCK MT2010. Underground articulated truck with 20-tonne load capacity

T50. Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: mm / 4 6

FLEXIROC T45. Surface drill rig for quarry and construction. Folding boom Hole diameter: mm (3½" 5")

SMARTROC T45. Surface drill rig for quarry and construction. Folding boom Hole diameter: mm (3½ 5 )

Scooptram ST7. Underground small size loader with 6.8-tonne capacity

ATTENTION: The drawing shows machine, where right boom is equipped with optional telescopic feeder.

Häggloader. A unique continuous loading system

PowerROC D55. Surface drill rig for mining, aggregate quarries, and construction. Hole range: mm ( 3 9/16 6 1/2 )

SCOOPTRAM EST1030. Electric underground loader with 10-tonne capacity

SCOOPTRAM ST7. Underground, small size loader with 6.8-tonne capacity

FlexiROC T35 & T40. Surface drill rigs for quarrying and construction. FlexiROC T35 Hole diameter: mm (2 1/2 4 1/2 )

MINETRUCK MT5020. Underground articulated truck with 50 -tonne load capacity

SpeedCut Diamond wire cutting machine for marble, granite, sandstone and limestone in the dimension stone industry.

ROBBINS 34RH C. Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter.

Scooptram ST14. Underground loader with 14-tonne capacity

SMARTROC D65. Surface down-the-hole drill rig for limestone and aggregate quarries, selective mining, construction and open pit mining.

ROBBINS 73-SERIES. Mid-size raiseboring machines for holes ranging from 1.5 to 3.1 m (5-10 ft.) in diameter

Minetruck MT42. Underground truck with 42-tonne load capacity

Häggloader. A unique continuous loading system

Minetruck MT54. Underground truck with a load capacity of 54 metric tonnes

Explorac 100 Reverse circulation drill rig for exploration drilling

Spraymec 8100 VC. Features. Technical data sheet AUSTRALIA

MINETRUCK MT65. Underground truck with 65-tonne load capacity

Minetruck MT65. Underground truck with 65-tonne load capacity

MINETRUCK MT42. Underground truck with 42-tonne load capacity

Charmec LC 605 D(V) Features. Technical data sheet

Christensen CT20. Surface core drill rig for mineral exploration

Spraymec 8100 VC. Features. Technical data sheet

Transcription:

Boomer M-series Face drilling rig for tunneling and mining applications with a coverage area up to 65 m² 1

Reloaded to meet your conditions The Boomer M-series face drilling rigs have become a key piece of equipment for mining and tunneling applications. As part of our commitment to continuous improvement, the face drilling rig has benefitted from a comprehensive upgrade, focusing on improved safety, increased robustness and lower operational costs. The end result is a new Boomer M-series that truly is reloaded. Main benefits Upgraded safety and ergonomics with ROPS and FOPS certified cabin, improved interior and safe bolting boom function Better durability and robustness with overall improvements to the entire rig such as strengthened components, better protection of parts and better protection against internal wear Lower operational costs thanks to longer service intervals and less unplanned downtime 2

Significant improvements in reliability with upgraded feeds Rock drills upgraded to 1838HD+ or MD20 ROPS and FOPS certified cabin for added safety (optional) The new heavy-duty BUT 36S boom is optimized for tough conditions Stronger axle for a longer life Filtration package designed to protect the key assets on the drill rig (optional) 3

The good just got better There are always ways to improve and evolve equipment design. When contemplating what to focus on with the Boomer M-series upgrade, we utilized customer focused workshops, site visits and feedback from operators and service technicians to identify what equipment areas should be enhanced. + Safe bolting boom function The Boomer M-series is unique in the mining and construction world because it offers a safe bolting boom function for the semi-mechanized installation of rock bolts. Due to the design of the BUT 36S booms and the side platforms on both sides of the operator station, it is possible to swing the feed all the way back to a position where the operator can safely load bolts into the feed without having to pass in front of the machine into areas with an unsupported roof. + MD20 is more productive and more robust The new generation of rock drills are more durable than ever, with improved penetration rate, drill steel economy, up to 30% less RDT consumption, less vibrations, higher hydraulic efficiency, up to 15% faster penetration rate than closest competitor and a recommended service interval of 1 000 impact hours. This means more uptime, increased productivity and lower running cost. + Epiroc Rig Control System The reloaded rig offers the latest Rig Control System, the fifth generation of the RCS, so as to simplify the operator s work and contribute to increased productivity. With a new intuitive interface, upgraded software and user-friendly environment, the aim is as always to create more productive conditions for rock drilling, and to improve drilling rate and drill steel economy. A comprehensive service offering Even the best equipment needs to be serviced regularly to make sure it sustains peak performance. An Epiroc service solution offers peace of mind, maximizing availability and performance throughout the lifetime of your equipment. We focus on safety, productivity and reliability. By combining genuine parts and an Epiroc service from our certified technicians, we safeguard your productivity wherever you are. 4

Technical specifications = Standard = Option A = Boomer M1 B = Boomer M2 Drilling system A B 1638HD+ 1838HD+ 2238HD+ Control system A B Direct Control System 2 (DCS2) Feed Angle Measurement, FAM 1 Feed Angle Measurement with hole depth, FAM 2 3038* MD20 Epiroc Rig Control System (RCS 5) Advanced Boom Control (ABC) Pure Hole blowing kit Water mist flushing, external water and air supply** Water mist flushing, external water, internal air supply** Rock drill lubrication warning kit Lubrication air filtration system *Requires RCS and may require a larger electrical motor ** Not in combination with 3038 Boom A B BUT 35 SL BUT 36 S T Automatic boom lubrication for positioning unit Advanced Boom Control (ABC) Regular Advanced Boom Control (ABC) Total Measure While Drilling (MWD) Underground Manager PRO (PC software) Underground Manager MWD (PC software) for analysis of drill data Bolt view Two operator panels (for standing operation only) Rig acces control Rig Remote Access (RRA), LAN or WLAN connection Total station navigation Certic Professional Dynamic Tunneling Package (DTP) Feed A B BMH 6000-Series 12 ft, 14 ft, 16 ft, 18 ft Telescopic feed BMHT 6000-series (max 18 ft) Extension drilling set BSH 110 (BMH feeds only) Rod Adding System, RAS (BMH feeds only)* Water spraying kit on cradle * Not in combination with 3038, Max 14 ft feed Air/watersystem A B Hydraulically driven screw compressor Atlas Copco GA 5 Hydraulically driven screw compressor Atlas Copco GA 30* Hydraulic water booster pump, max capacity at 15 bar boost 200 l/min. Minimum water inlet, 2 bar at 200 l/min** Electrical system A B Total installed power 83 kw, Main motors, Sf 1.15 75 kw Total installed power 158 kw, Main motors, Sf 1.15 2x75 kw Total installed power 198 kw, Main motors, Sf 1.3 2x95 kw** Voltage 380-1 000 V 50/60 Hz Starting method, star/delta (400-690 V) Starting method, direct start (1 000 V) Starting method soft start (not for 1 000 V) Transformer 8 kva Electronic overload protection for electric motors Digital voltmeter/amperage meter in electric cabinet Percussion hour meter on operator display Phase sequence and eart fault indicator Hydraulic water booster pump, max capacity at 30 bar boost 400 l/min. Minimum water inlet, 2 bar at 400 l/min** Water hose reel Water hose (Ø1.5 inch 70 m) *Might require a larger electrical motor **Depending on selected rock drill Cable reel, diameter 1 600 mm Electric outlet for accessories, 16 A (CE)/32 A (CE) (380-690 V) Extra transformer 3-phase, 15 kva (230/400 V outlet) (690-1 000 V) PC4 or PC5 plug Battery charger Dual controls for cable reel Hydraulic system A B Low oil level indicator Stainless steel electrical enclosure *Depending on selected rock drill ** When equipped with 3038 Oil temperature gauge on oil tank, electronically supervised Filtration 16 μm Oil filter indicator Extra filtration package for water and fine particle removal Mineral hydraulic oil Biodegradable hydraulic oil Electrical oil filling pump Heater kit for hydraulic oil tank, diesel engine and electric motors Ni-Cr plated piston rods (limitations exist) 5

Technical specifications = Standard = Option A = Boomer M1 B = Boomer M2 Carrier A B Deutz TCD 2013 L04 2 V stage IIIA/Tier 3 (120 kw) Deutz TCD 4.1 L04, stage IV/Tier 4 F (115 kw) Articulated steering ±41 steering angle* TCD 4.1 stage 5 alternative Four-wheel drive Electric system 24 V Batteries 2x125 Ah Hose/cable guiding at water/cable reel Dana 113 (short) axle Automatic differential lock on axles, limited slip Tires 12.00xR24 Clearance outside axles 13 rear, 22 front Drifter rods Rock drill Rod Min. hole diameter (mm) 1838 2238 MD20 SR35-H35-T38 Speedrod 38 SR35-H35-T38 38 SR35-R39-T38 38 3038 SR35-R39-T38 45 Extension rods for injection drilling/ras Rock drill Rod Min. hole diameter (mm) 1838 2238 MD20 Rnd 32 Speedrod 38 Rnd 39 Speedrod 38 3038 TC42-R39-TC42 Speedrod 64 Tramming lights 8x22 W LED Working lights x 4x150 W LED Illuminated stairs LED Fuel tank, volume 110 l Central lubrication system Fire suppression system ANSUL (Manual, checkfire or automatic) Fire suppression system FORREX (Automatic) Rig washing kit Manual lubrication kit Shank adapters Rock drill Rod Min. hole diameter (mm) 1838 2238 MD20 R38 38 T38 38 R32* 38 3038 TC42 (conical T-thread) 45 *Intended for RAS and extension drilling with BSH 110 Boot washing kit Hydraulic Swellex pump type H1 for manual installation Hydraulic outlet for charging with Mini SSE *If RHS E or SP2 service platform is equipped the steering angle will be reduced to 30 Protective roof A B Mounting height -80 mm/+310 mm Manual spotlight, left and/or right Two operator panels (for standing operation only) Swingable seat for drilling and tramming (one operator panel only) Cabin (optional) A B ROPS and FOPS certified cabin, noise level <80 db(a) Mounting height -140/+250 mm Low profile cabin -150 mm Air conditioning unit Heating function for air conditioning (water transferred) 12 V outlet for communication radio Electrical heater, 1.2 kw, 230 V (CE) Reversing camera with monitor Fixed seat Couplings Rock drill Rod Diameter (mm) Length (mm) 1838 R38 55 170 2238 MD20 T38 55 170 3038 TC42/T38 57 175 Recommended cable size and length Voltage Type Dimension (mm 2 ) Diameter (mm) Length (m) Rock drill 380-400 V Buflex 3x185+3G35 56 90 440-500 V Buflex 3x150+3G25 52 100 550 V Buflex 3x120+3G25 46 120 660-690 V Buflex 3x95+3G16 45 150 660-690 V Buflex 3x150+3G25 52 100 3038 1 000 V Buflex 3x50+3G10 33 200 1 000 V Buflex 3x95+3G16 45 150 3038 Recommendations are given for surrounding temperature of 40 C and up to a height of 2 000 m Swingable seat for drilling and tramming Cabin body made of stainless steel Joystick-controlled spotlights left and/or right, 70 W Front window 22 mm (P8B saftey classed) Media player Noise and vibration Operator sound pressure level in canopy, drilling, free field (ISO 11201) Operator sound pressure level in cabin, drilling, free field (ISO 11201) Operator sound pressure level working close to machine, drilling, free field Sound power level (ISO 3744), drilling, free field Vibration levels seated, drilling (ISO 2631-1) cabin Vibration levels standing, drilling (ISO 2631-1) cabin 131 db(a) re 1 pw when equipped with 3038 104±6 db(a) re 20 upa 75±3 db(a) re 20 upa 104±6 db(a) re 20 upa 128 db(a) re 1 pw* 0.07±0.07 m/s^2 0.07±0.07 m/s^2 6

Technical specifications Dimensions in millimeters 2 387 1 947 One boom rig 1 600 7 178 3 043 M2 2 908 803 2 000 2 170 795 4 170 934 14 350 with BMH 6914 Boomer M-series equipped with 1838. 2 297 1 947 3 043 M2 2 908 803 1 800 2 170 795 3 970 934 14 049 with BMH 6814 Boomer M-series equipped with 3038. 7 483 Two boom rig 200 9 655 10 068 Boomer M-series, coverage area. Dimensions Width Height with cabin Height roof up/down Length with BMH 6814 feed(s) Ground clearence Turning radius outer/inner (Equipped with 1838) Turning radius outer/inner (Equipped with 3038) 2 550 mm 3 179 mm 3 019/2 324 mm 14 049 mm 260 mm 7 500/4 400 mm 7 200/4 400 mm Tramming speed On flat ground (rolling resistance 0.05) >15 km/h On incline 1:8 >5 km/h Gross weight (depending on configuration) Rig type Total Boom side Engine side One boom rig 18 000-20 000 kg 9 000-11 000 kg 9 000 kg Two boom rig 23 000-27 000 kg 17 500-19 000 kg 6 000-8 000 kg 7

9869 0080 01a 2018-09 Örebro, Sweden. Legal Notice Copyright 2018, Epiroc Rock Drills AB, Örebro, Sweden. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Epiroc Customer Center for specific information. United in performance. Inspired by innovation. Performance unites us, innovation inspires us, and commitment drives us to keep moving forward. Count on Epiroc to deliver the solutions you need to succeed today and the technology to lead tomorrow. epiroc.com