TABLE OF CONTENTS BALANCING EQUIPMENT... VIBRATION ANALYSIS... CORE LOSS TESTERS... SAND BLASTING EQUIPMENT... DRY ICE BLASTING EQUIPMENT... WINDING MACHINES/HEADS... WIRE RACK SCALE... CUT-OFF SAWS... BAKE AND BURN OFF OVENS... TEST CENTERS... WIRE STRIPPERS... BANDING EQUIPMENT... INSULATION CUTTERS... WEDGE AND INSULATION CUTTERS... UNDERCUTTERS... PARTS WASHERS... TEST INSTRUMENTS... HIPOT TESTERS... BEARING HEATERS... PRESSES... HYDRAULIC PULLERS... MANUAL PULLERS... VPI SYSTEMS... BRAZING EQUIPMENT... DYNAMOMETERS... LASER ALIGNMENT EQUIPMENT... PHASE CONVERTERS... RTD S... PARTS WASHER SOAP... TOOLS... HAND SHEARS... SLINGS... 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17 20 22 27 28 29 31 32 33 34 35 36 37 38 39 40 41 42
W
WIRE RACK SCALE ACE WIRE RACK SCALE SYSTEM > Exclusively Through Essex Brownell ACE Equipment Company and Essex Brownell have designed a unique scale system for weighing magnet wire stored on a wire rack. The scale system comes with a meter which allows a customer the ability to weigh and calculate the total amount of wire stored on their wire rack. The scale system can be used with any wire rack that will fit on the scale. Dimension: Model ESS-41: 4 W x 5 L x 3 H Model ESS-42: 5 W x 6 L x 3 H Calculate How Much Wire You Have! Customers can now know exactly how much wire they have at any time, and can easily calculate how much wire has been used for any winding job. The total amount of wire on the rack is weighed. The meter mounted to the Model ESS-41 and ESS-42 can be zeroed out and used to weigh one pail of wire or 40. The capacity of the ESS Scale System is up to 5,000 pounds. Illustrates the Model ESS-42 with the optional ACE Model 42 Wire Rack
These Nexjen Systems High Performance CB & DB Series Test Supplies provide infinitely variable voltage adjustments on both the DC Field and the AC Armature Supply. They are specifically designed for Motor and Transformer testing. AC starting on the incremental outputs is provided by a soft starter and +/- 10% input taps are included on the testing transformer to compensate for supply input variations. LED instrumentation allows for monitoring of the outputs in use. Model 166KVA-SS480 166 KVA AC DC Motor Test Supply with the full test documentation system. This is a compact power supply for testing requirements of small to medium size motor shops. AC voltages are provided with soft starting on each incremental output. Integrated inrush current protection is provided by the soft starter. A variable DC Field supply is provided with Field Loss protection and overcurrent protection. Field operation is allowed with either the AC Supply or DC Armature outputs. A DC Armature supply with four variable ranges and overcurrent protection is included. DC Field and DC armature operations are safety interlocked. All panel outputs are push button activated with red LED metering for continuous display of output voltages and currents. A red strobe lamp illuminates on any panel output. Plus and minus 10% taps are provided on the testing autotransformer for adjustment of input voltage to the supply.
CAM INNOVATION > BTU100 Band Tension Unit The BTU100 is a self-contained unit used to apply controlled tension to wire or tape when banding armatures. The unit accepts glass fiber tape up to 30 mm wide and both round and flat steel wire. Tension Control Tension is monitored continuously by a hydraulic sensing head fitted with a calibrated manual dial display. Variable tape tensions can be set and a quick release is actuated to release tension at the end of the banding cycle. Tension Adjustment Tension can be easily varied via adjustments made to the tension reel arrangement. Straightening Straightening rollers, pre-tension pads, and guide rollers are provided for banding with wire. Flexible Mounting The BTU100 can be simply floor mounted, fitted to the saddle of an existing winding machine, or incorporated with the TS traversing saddle to offer a complete solution. SPECIFICATION: Tension Range Up to 680 kg (1500 lbs) Maximum tape width 30 mm Maximum wire width 3 mm Traversing saddle shown with band tension unit TS Traversing Saddle The TS Traversing Saddle consists of a pair of rails suitably braced for floor mounting. The traversing saddle is easily moved smoothly along the horizontal axis via a manually operated gear and chain driven rack and pinion. The standard traverse length is 1500 mm however other lengths can be made to order.
CAM Innovation UL Semi-Automatic Lathe Undercutter Built with heavy duty components for more accurate and consistent cuts The UL Semi-Automatic Mica Undercutter is specifically designed to be affordable for smaller shops undercutting a wide mix of DC motors. It mounts on the tool compound of a conventional lathe, sets up in minutes, and produces high quality undercutting that is far superior to manual undercutting methods. A motor driven carriage, with adjustable speed control and a travel stop for setting the distance of travel, provides smooth, consistent cutting stokes. All the operator needs to do is align each mica slot with the saw and push a button to begin each cut. Your UL undercutter comes complete with tooling for easy on easy off mounting. Better Technology Produces Higher Quality Results Motor Driven for a more controlled and consistent saw traverse - reduces operator fatigue by eliminating need to repeatedly push the saw spindle back and forth Variable Speed Control allows adjustment of the carriage speed to suit saw cutting conditions. Carbide Saws designed to stay sharper, last longer and cut smoother Climb Cut Saw Rotation cuts from the top down into the mica providing smooth cuts with less burrs and better side mica removal. Floating Saw Spindle eliminates constant tracking adjustments and automatically tracks skewed mica. Adjustable Skew easily repositions the undercutter to allow it to follow severely skewed mica. Eliminates inaccurate machine shimming. Built to Last rugged, robust construction with a high strength aluminum cast frame, two case hardened stainless steel round ways with linear bearings mounted on a cast metal base.
START UP CHEMICALS AVAILABLE 16:1 Ratio; 5 Gallon Pail Part Number: JRI-1000-C-03-03
Model Load Height Turntable Diameter Work Load Water Capacity Material of Construction Heating Source Power Requirement Shipping Weight SJW-3 40 36 Roll out 1500 Lbs 192 Gallons Mild steel (3) 6 KW 220/440 1 Ph/3 Ph SJW-3G 40 36 Roll out 1500 Lbs 192 Gallons Mild steel LP/ Natural 220/440 1 Ph/3 Ph SJW-3SS 40 36 Roll out 1500 Lbs 192 Gallons 304 Stainless (3) 6 KW 220/440 1 Ph/3 Ph SJW-3GSS 40 36 Roll out 1500 Lbs 192 Gallons 304 Stainless LP/ Natural 220/440 1 Ph/3 Ph 1300 Lbs 1300 Lbs 1300 Lbs 1300 Lbs Standard Steel Fabrication: Overall Dimensions 54 L X 42 W X 77 H Inside Working Height 45 Turntable Diameter 36 Work Load 1500 Lbs. Pump Motor 5 Horse Pump Output 65 PSI @ 45 Gal. Per Min. Cabinet Construction 12 Gauge Power Source 230/460 V 3 Phase Water Capacity 166 Gallons Turntable Drive Gear Driven Door Seal Mechanical Warranty One Year (Parts) Heat Source 18 KW Shipping Weight 1100 Lbs. Nozzles 19 Intermediate Spray Bar 1
With SKF Digital Winding Testers, you can perform Resistance, Bar-to-bar, PI, HiPot, and Surge tests, as well as digitize and store data for future use. All SKF digital testers offer high precision testing capabilities allowing data collection in the shop or in the field.
Specifically designed for testing insulation on cables, transformers, motors, wiring installations, and equipment; designed with the highest level of safety features built in.
Simpson Electric manufactures highquality panel instrumentation and test equipment. Modularity gives customers access to full-featured performance at a competitive price. Simpson Electric s commitment to producing the best meters is matched only by their commitment to superior customer service and strategic design.
Non-Magnetizing
HYDRAULIC PULLERS
Model & Options Max Reach Spread Range Capacity Center Bolt Dia Weight in mm in mm tons in lbs kg 202 2.25 57.2.25-3.25 6.4-82.6 1 0.313.65.29 203 3 76.2.25-4.5 6.4-114 2 0.375 1.25.57 204 4 102.50-5 13-127 2 0.539 3.65 1.66 206 6 152.50-7 13-178 6 0.660 6.75 3.06 208 8 203.75-12 19-305 12 0.766 11.70 5.31 210 9.67 246 1-14 25-381 14 0.766 13.10 5.94 213 12 305 2.5-18 64-457 25 1.166 42.80 19.41 216 14 356 3-25 76-635 35 1.231 60.50 27.44 Model & Options Max Reach Spread Range Capacity Center Bolt Dia Weight in mm in mm tons in lbs kg 102 2.25 57.2.25-3.25 6.4-82.6 1 0.313.68.31 103 3 76.2.25-4.5 6.4-114 2 0.375 1.45.66 104 4 102.50-5 13-127 5 0.539 4 1.88 106 6 152.50-7 13-178 10 0.660 8 3.58 108 8 203.75-12 19-305 17 0.766 14 6.40 110 9.67 246 1-14 25-381 20 0.766 16 7.76 113 12 305 2.5-18 64-457 30 1.166 44 22.07 116 14 356 3-25 76-635 40 1.231 68 31.93
with a
RTD COMPANY - Measurement Specialties > Stator Winding RTDs and Thermocouples Accurately measure the winding temperatures in motors and generators. Measurement Specialties Stator RTD sensors are built to meet the specifications of ANSI C50. 10-1990, general requirements for synchronous motors. We can build your specifications! Silicone Rubber Surface RTD Sensor The Silicone Rubber Surface RTD is a flat, flexible, rectangular sensor with a sensing element laminated in silicone rubber. They are used to monitor or measure temperature on round or uneven surfaces. For motor and generator applications, they are commonly used in the end turns of the windings. Measurement Specialties and Essex Brownell have many sizes available from stock or we can customize to meet your specifications. Tip Sensitive Bearing RTD Probe The Tip Sensitive Bearing RTD Probe is a tubular sensor in which the sensing element is encased in a copper alloy tip. This allows for increased accuracy and sensitivity to temperature changes at the point of contact in bearings. Inserted at an opening on the bearing housing, they are used in electric motors and generators for continuous sensing of the bearing s temperature. Bearing RTD & Thermocouple Assemblies Available in Standard Sensor/Size/Connection Head style packages. Other combinations are available at competitive prices & delivery times.
VMC-5 VMC-30 VMC-55 5 Gallon Pail 30 Gallon Drum 55 Gallon Drum SP-PC10-5 SP-PC10-55 5 Gallon Pail 55 Gallon Drum
TCH-0HD 1 ½ face diameter TCH-3HD 2 ½ face diameter TCH-1HD 1 ¾ face diameter TCH-4HD 2 ¾ face diameter TCH-2HD 2 face diameter TCC-9720-30 3 Diameter TCC-9720-65 6.5 Diameter TCC-9720-80 8 Diameter TCC-9720-40 4 Diameter TCC-9720-70 7 Diameter
Wear-Flex America s Leading Manufacturer of Protective Nylon Slings Order by part number and Length Sling Width Inches Choker @ 30 Rated Capacity Lbs. Vertical @ 90 Basket @ 90 EN-1001-* 1 1600 2000 4000 EN-1002-* 2 3200 4000 8000 EN-1003-* 3 4800 6000 12000 EN-1004-* 4 6400 8000 16000 EN-1006-* 6 9600 12000 24000 EN-2001-* 1 3200 4000 8000 EN-2002-* 2 6400 8000 16000 Order by part number and Length SS- EN-1001-* SS- EN-2001-* SS- EN-2002-* Sling Width Inches Sling Hook Number Rated Capacity Lbs. Vertical @ 30 Vertical @ 90 1 1600 2000 4000 2 3200 4000 8000 3 4800 6000 12000 MARK-III 1 W x 30 L(Box of 3) MARK-IV 1 W x 40 L(Box of 3) MARK-V 1 W x 50 L(Box of 3) COMBO Includes 1 each of MARK-III, MARK-IV and MARK-V.
Essex Group, Inc., 2015 15BOL100