Phone: 00-221-047 * Fax: 71-672-6370 Page -2 Page -3 SIGNAL TOWERS Signal towers Ø70mm Steady, blinking light or flash modules Pulsed or continuous sound modules Incandescent and LED bulbs. SIGNAL BEACONS Signal beacons Ø62mm Blinking or steady light modules Sound-light pulsed or continuous modules Incandescent and LED bulbs.
SIGNAL TOWERS AND BEACONS Phone: 00-221-047 * Fax: 71-672-6370 Signal towers Ø70mm Modular and combinations up to 7 modules Steady or blinking light, pulsed or continuous sound modules. Signal beacons Ø62mm Steady or blinking light, pulsed or continuous sound modules. Signal towers and beacons SEC. - PAGE Signal towers Ø70mm / Ø2.75... - 2 Signal beacons Ø62mm / Ø2.44... - 3 Accessorios... - 4 Dimensions... - 6 Wiring diagrams... - 7 CONTROL AND SIGNALLING
Phone: 00-221-047 * Fax: 71-672-6370 Signal towers Ø70mm / Ø2.75 LT7 EL LT7 GL LT7 FL LT7 S LT7 CM 01 LT7 CP 01 Steady light modules BA15d fitting. Bulb ( LT7 ALB... and LT7 ALL...) not included. LT7 EL1 Orange 1 0.02 LT7 EL3 Green 1 0.02 LT7 EL4 Red 1 0.02 LT7 EL5 Yellow 1 0.02 LT7 EL6 Blue 1 0.02 LT7 EL White 1 0.02 Blinking light modules. BA15d fitting. Bulb ( LT7 ALB... and LT7ALL...) not included. LT7 GL B1 Orange, 24VAC/DC 1 0.03 LT7 GL B3 Green, 24VAC/DC 1 0.03 LT7 GL B4 Red, 24VAC/DC 1 0.03 LT7 GL B5 Yellow, 24VAC/DC 1 0.03 LT7 GL B6 Blue, 24VAC/DC 1 0.03 LT7 GL B White, 24VAC/DC 1 0.03 LT7 GL E1 Orange, 110-120VAC 1 0.03 LT7 GL E3 Green, 110-120VAC 1 0.03 LT7 GL E4 Red, 110-120VAC 1 0.03 LT7 GL E5 Yellow,110-120VAC 1 0.03 LT7 GL E6 Blue, 110-120VAC 1 0.03 LT7 GL E White, 110-120VAC 1 0.03 LT7 GL M1 Orange, 230-240VAC 1 0.03 LT7 GL M3 Green, 230-240VAC 1 0.03 LT7 GL M4 Red, 230-240VAC 1 0.03 LT7 GL M5 Yellow, 230-240VAC 1 0.03 LT7 GL M6 Blue, 230-240VAC 1 0.03 LT7 GL M White, 230-240VAC 1 0.03 Flash modules. With 4-Joule xenon bulb. LT7 FL B1 Orange, 24VAC/DC 1 0.092 LT7 FL B3 Green, 24VAC/DC 1 0.092 LT7 FL B4 Red, 24VAC/DC 1 0.092 LT7 FL B5 Yellow, 24VAC/DC 1 0.092 LT7 FL B6 Blue, 24VAC/DC 1 0.092 LT7 FL B White, 24VAC/DC 1 0.092 LT7 FL E1 Orange, 110-120VAC 1 0.092 LT7 FL E3 Green, 110-120VAC 1 0.092 LT7 FL E4 Red, 110-120VAC 1 0.092 LT7 FL E5 Yellow, 110-120VAC 1 0.092 LT7 FL E6 Blue, 110-120VAC 1 0.092 LT7 FL E White, 110-120VAC 1 0.092 LT7 FL M1 Orange, 230-240VAC 1 0.092 LT7 FL M3 Green, 230-240VAC 1 0.092 LT7 FL M4 Red, 230-240VAC 1 0.092 LT7 FL M5 Yellow, 230-240VAC 1 0.092 LT7 FL M6 Blue, 230-240VAC 1 0.092 LT7 FL M White, 230-240VAC 1 0.092 Pulsed or continuous sound modules complete with cover. LT7 S0 B 24VAC/DC, pulsed (90dB). 1 0.240 IP54 protection LT7 S1 B 24VAC/DC, 16 sound tones 1 0.240 (0dB max). IP65 protection LT7 S2 B 24VAC/DC pulsed (7dB)❶ 1 0.240 or continuous LT7 S2 E 110-120VAC 1 0.240 (75dB)❷sound LT7 S2 M 230-240VAC IP65 protection 1 0.240 Connection modules complete with cover. LT7 CP 01 For plastic tubes, black 1 0.110 colour, bottom entry LT7 CM 01 For metal tubes, black colour, 1 0.120 bottom entry General characteristics Signal towers are fundamental elements in manufacturing processes for the visual and audible signalling of the system status. The signal towers can be assembled by stacking up to 7 modules, in the following sequence, starting from the top: red, yellow, orange, blue, green and white. The sound module, if any, must always be positioned at the top of the signal tower. Technical characteristics Maximum operational voltage: 250VAC/DC Consumption of flash and sound modules: LT7 FL B... in AC: 135mA LT7 FL B... in DC: 75mA LT7 FL E...: 20mA LT7 FL M...: 15mA LT7 S0 B: 25mA LT7 S1 B: 40mA LT7 S2 B: 200mA LT7 S2 E: 40mA LT7 S2 M: 30mA Material: Polycarbonate or anodised aluminium Connections: Screw clamp terminals, maximum 1.5mm 2 /16 AWG conductor section Tightening torque: 0.5Nm/4.5lbin Operating temperature: -20...+50 C; for 12VAC max up to +40 C Number of stackable elements: Seven. Degree of protection IEC/EN: IP65; IP54 for LT7 S0B sound module. Certifications and compliance Certifications obtained: EAC, UL Listed, for USA and Canada (culus - file E31016) as Power Circuit and motor-mounted Apparatus - Stackable tower lights. Compliant with standards: IEC/EN 60947-5-1, IEC/EN 60947-1, UL50, CSA C22.2 n 14. Combinations 7 E L E M E N T S M A X I M U M Sound module (always on top) LT7 S LT7 L LT7 L LT7 L Connection module LT7 CM 01 (metal) LT7 CP 01 (plastic) LT7 BP 01 (plastic) LT7 TM (metal) LT7 BM 01 (metal) Fixing base and extension tubes Cover (supplied with LT7 CM 01 and LT7 CP 01 module) LT7 ALB (incandescent bulb) LT7 ALL (LED bulb) LT7 BM 02 (metal) LT7 BP 02 (plastic) ❶ 4.5dB for LT7 S2 B. ❷ 2.6dB for LT7 S2 B. -2 Accessories and spare parts page -4 Dimensions pages -6 and 7 Wiring diagrams page -7
Phone: 00-221-047 * Fax: 71-672-6370 Signal beacons Ø62mm / Ø2.44 Steady light modules. BA15d fitting. Bulb not included. LB6 EL1 Orange 1 0.060 LB6 EL3 Green 1 0.060 LB6 EL4 Red 1 0.060 LB6 EL5 Yellow 1 0.060 LB6 EL6 Blu2 1 0.060 LB6 EL White 1 0.060 Blinking or steady light modules. BA15d fitting. Bulb not included. LB6 GL B1 Orange, 12-4VAC/DC 1 0.060 LB6 GL B3 Green, 12-4VAC/DC 1 0.060 LB6 GL B4 Red, 12-4VAC/DC 1 0.060 LB6 GL B5 Yellow, 12-4VAC/DC 1 0.060 LB6 GL B6 Blue, 12-4VAC/DC 1 0.060 LB6 GL B White, 12-4VAC/DC 1 0.060 LB6 GL M1 Orange, 24-230VAC 1 0.060 LB6 GL M3 Green, 24-230VAC 1 0.060 LB6 GL M4 Red, 24-230VAC 1 0.060 LB6 GL M5 Yellow, 24-230VAC 1 0.060 LB6 GL M6 Blue, 24-230VAC 1 0.060 LB6 GL M White, 24-230VAC 1 0.060 Sound-light pulsed or continuous modules. Bulb included. LB6 S2 B1 Orange, 24VAC/DC (0dB) 1 0.060 LB6 S2 B3 Green, 24VAC/DC (0dB) 1 0.060 LB6 S2 B4 Red, 24VAC/DC (0dB) 1 0.060 LB6 S2 B5 Yellow, 24VAC/DC (0dB) 1 0.060 LB6 S2 B6 Blue, 24VAC/DC (0dB) 1 0.060 LB6 S2 B White, 24VAC/DC (0dB) 1 0.060 General characteristics Signal beacons are fundamental elements in manufacturing processes for the visual and audible signalling of the system status. Technical characteristics Maximum operational voltage: 250VAC/DC Consumption of sound modules LB6 S2...: 150mA Material: Polycarbonate Connections: Screw clamp terminals, maximum 1.5mm 2 /16 AWG conductor section Tightening torque: 0.5Nm/4.5lbin Operating temperature: -20...+50 C Degree of protection IEC/EN: IP54; IP30 if used with LB6 BP 04, LB6 BP 06 or LB6 BP 0. Reference standards Compliant with standards: IEC/EN 60947-5-1, IEC/EN 60947-1. Combinations Light and sound modules LB6 EL - LB6 GL - LB6 S2 B 1 3 4 5 6 Fixing base and extension tubes LB6 BP 03 LB6 BP 05 LB6 BP 07 LB6 BP 04 ❶ LB6 BP 06 ❶ LB6 BP 0 ❶ LT7 ALB (incandescent bulb) LT7 TP0100 LT7 ALL (LED Bulb) ❶ Only for sound-light modules. LT7 BP 01 (plastic) LT7 BP 02 (plastic) LB6 EL LB6 GL LB6 S2... Visual code Red Yellow Orange Blue Green White Meaning Danger. Warning and Mandatory Normal No specific Emergency. Caution. command. situation. meaning. Abnormal Regular situation. operation. Sound Fast modulated Continuous Alternating Constant and Other sounds. repetition or short sound. sound at. prolonged high-pitch constant tone sound pulsing. after an alarm. Correlated Immediate Control Intervention No specific Depending on actions intervention intervention needed for action. the situation. to deal with required. mandatory dangerous action. situation. Interpretation of light and sound signals for signal towers and beacons Light and sound signals are a fundamental element for the safety of a system. To avoid incorrect interpretations, a European standard has been introduced defining an equivocal meaning to visual or audible signalling devices. Each colour or sound alarm corresponds to a specific state of operation of the connected system and various levels of warning, as given in the following table, according to EN 91-IEC/EN 60073 standards. The white coloured module does not have a specific meaning so it can be used as one may need. Accessories and spare parts page -4 Dimensions pages -6 and 7 Wiring diagrams page -7-3
Phone: 00-221-047 * Fax: 71-672-6370 Accessories and spare parts for signal towers and beacons LT7 BP 01 LT7 BP 02 LT7 ALB LT7 ALL Fixing bases. LT7 BP 01 Horizontal surface mount, 1 0.045 black plastic with 100mm/3.94 extension LT7 BP 02 Vertical wall mount, 1 0.07 black plastic Extension tube for plastic base, stackable sections. LT7 TP 0100 100mm/3.94, 1 0.029 black plastic Incandescent bulb, 5W, BA15d fitting. LT7 ALB A 12VAC/DC 10 0.006 LT7 ALB B 24VAC/DC 10 0.006 LT7 ALB E 130VAC/DC 10 0.006 LT7 ALB M 260VAC/DC 10 0.006 LED bulb, BA15d fitting. LT7 ALL A4 Red, 12VAC/DC 1 0,010 LT7 ALL A White, 12VAC/DC 1 0,010 LT7 ALL B3 Green, 24VAC/DC 1 0.010 LT7 ALL B4 Red, 24VAC/DC 1 0.010 LT7 ALL B5❶ Yellow/Orange, 24VAC/DC 1 0.010 LT7 ALL B6 Blue, 24VAC/DC 1 0.010 LT7 ALL B White, 24VAC/DC 1 0.010 LT7 ALL E3 Green, 110-120VAC 1 0.010 LT7 ALL E4 Red, 110-120VAC 1 0.010 LT7 ALL E5❶ Yellow/Orange, 110-120VAC 1 0.010 LT7 ALL E6 Blue, 110-120VAC 1 0.010 LT7 ALL E White, 110-120VAC 1 0.010 LT7 ALL M3 Green, 230-240VAC 1 0.010 LT7 ALL M4 Red, 230-240VAC 1 0.010 LT7 ALL M5❶ Yellow/Orange, 230-240VAC 1 0.010 LT7 ALL M6 Blue, 230-240VAC 1 0.010 LT7 ALL M White, 230-240VAC 1 0.010 ❶ Used with yellow or orange light modules. General characteristics The assembly operation of the signal towers is simple and fast and does not require the use of any tools. The fixing of each element on top of the other is obtained by the bayonet insert joint, with slight pressure and simple rotating movement. There are specific white inscriptions to indicate the correct alignment. 1 2 Technical characteristics Consumption of bulb fitted on light modules: LT7 ALB A: 420mA LT7 ALB B: 210mA LT7 ALB E: 43mA LT7 ALB M: 22mA LT7 ALL A...: <60mA LT7 ALL B...: <30mA LT7 ALL E...: <20mA LT7 ALL M...: <20mA. Reference standards Compliant with standards: IEC/EN 60947-5-1, IEC/EN 60947-1, UL50, CSA C22.2 n 14. 2 1 Accessories and spare parts for signal towers Ø70mm / Ø2.75 only LT7 BM 01 Fixing bases. LT7 BM 01 Horizontal surface mount, 1 0.099 metal, black finish LT7 BM 02 Vertical wall mount, 1 0.14 metal Extension tubes for metal base, anodised aluminium, fixed non-stackable sections. LT7 TM 0100 100mm / 3.94 1 0.016 LT7 TM 0150 200mm / 7.9 1 0.024 LT7 TM 0300 300mm / 11. 1 0.04 LT7 TM 0400 400mm / 15.75 1 0.064 LT7 TM 0500 500mm / 19.7 1 0.00 LT7 TM 1000 1000mm / 39.4 1 0.160 LT7 BM 02 LT7 TM -4 Dimensions page -7
Phone: 00-221-047 * Fax: 71-672-6370 Accessories and spare parts for signal beacons Ø62mm / Ø2.44 LB6 BP03 LB6 BP05 Fixing bases for light modules. LB6 BP 03 Horizontal surface mount, 1 0.040 plastic, black colour LB6 BP 05 For Ø22mm / Ø0.7 1 0.040 hole type, black plastic LB6 BP 07 For extension 1 0.020 connection, plastic, black colour. Use with fixing bases LT7 BP 01 and LT7 BP 02 Fixing bases for sound modules. LB6 BP 04 Horizontal surface mount, 1 0.040 plastic, black colour LB6 BP 06 For Ø22mm / Ø0.7 1 0.040 hole type, black plastic LB6 BP 0 For extension 1 0.020 connection, plastic, black colour. Use with fixing bases LT7 BP 01 and LT7 BP 02 General characteristics The assembly operation of the signal beacons is simple and fast and does not require the use of any tools. There are specific white marks to indicate the correct alignment. 1 2 LB6 BP07 LB6 BP04 LB6 BP06 LB6 BP0 Dimensions page -7-5
Dimensions [mm (in)] Phone: 00-221-047 * Fax: 71-672-6370 SIGNAL TOWERS Ø70mm / Ø2.75 LT7 S0 B LT7 EL... LT7 GL... LT7 FL... LT7 S1... LT7 S2... Light modules LT7 EL... LT7 GL... LT7 FL... 56 (2.20 ) 13 (0.51) Ø60 (2.36 ) Sound modules LT7 S0 B 92 (3.62 ) LT7 S1... LT7 S2... 72 (2.3 ) Connection modules LT7 CM 01 LT7 CP 01 16 (0.63 ) 45.5 (1.79 ) 13 (0.51 ) Ø60 (2.36 ) 101.5 (4.00 ) 157.5 (6.20 ) 213.5 (.40 ) 269.5 (10.61 ) 325.5 (12.1 ) 31.5 (15.02 ) 473.5 (1.64 ) 453.9 (17.7 ) Ø5 (0.20 ) LT7 CM 01 - LT7 CP 01 7 (0.27 ) 42 (1.65 ) 4 (1.9 ) SIGNAL BEACONS Ø62mm / Ø2.44 LB6 EL... LB6 GL... LB6 S2... LB6... with base LB6 BP 03 and LB6 BP 04 ❶ LB6... with base LB6 BP 05 and LB6 BP 06 ❶ LB6... with base LB6 BP 07 and LB6 BP 0 ❶ 31 (1.22 ) 23.5 (0.92 ) 37 (1.46 ) 62.5 (2.46 ) 62.5 (2.46 ) 62.5 (2.46 ) 17 (0.67 ) 62.5 (2.46 ) Ø62 (2.44 ) Ø5 (3.35 ) Ø22 (0.7 ) Ø62 (2.44 ) Ø62 (2.44 ) 65 (2.56 ) 32.5 (1.2 ) Ø5 (0.20 ) 56.3 (22.17 ) 22.3 (0. ) (+0.4,-0 / +0.01, -0 ) ❶ With slits for sound light modules LB6 S2... 1...4 (0.04...0.16 ) -6
Dimensions [mm (in)] Phone: 00-221-047 * Fax: 71-672-6370 ACCESSORIES - Extensions and bases LT7 BP 01 LT7 BP 02 LT7 BM 01 LT7 BM 02 122 (4.0 ) Ø25 (0.9 ) 22 (0.7 ) 14.5 (0.57 ) Ø25 (0.9 ) 3 (1.50 ) Ø67 (2.64 ) Ø5 (0.20 ) 51 (2.01 ) 105 (4.13 ) 1 (0.71 ) 64.5 (2.54 ) 21 (0.3 ) (0.31 ) Ø30 (1.1 ) 70 (2.75 ) 11 (0.43 ) 9 (0.35 ) Ø5 (0.20 ) (0.31 ) Ø5 (0.20 ) LT7 TP 0100 Ø25 (0.9 ) 22 (0.7 ) 122 (4.0 ) LT7 TM... 1000 (39.37 ) max 70 (2.75 ) Ø5 (0.20 ) 71 (2.79 ) 20 109 (4.29 ) Wiring diagrams SIGNAL TOWERS Ø 70mm LT7... SIGNAL BEACONS Ø 62mm LB6... LT7 CM 01 - LT7 CP 01 X1 BULB BULB C 1 2 3 4 5 6 7 X2 L N Connect terminals C and 1 as indicated to power the first module. If other modules are fitted, the respective terminals must be connected accordingly. -7