Low Cost Submersion and In-Line Electrodes Economical design for in-line or submersion use Choose from single or double models Threaded 1/2" or 3/4" NPT connections Choose from spherical or flat measuring surfaces Special models for low ionic and other specialty applications available S270 Series yton Sensors This series of electrodes is designed to provide an economical multi-purpose solution for in-line or submersion measurements. Based on our proven S200C bulb and S350CD flat surface glass technology, these rugged and durable electrodes are available in yton nipples with 1/2" or 3/4" NPT threads; or in our durable epoxy body with or without quick disconnect top caps. Choose from single or double designs, flat or recessed measuring surface configurations and cable lengths and connectors as required. For special configurations such as low ionic models, fluoride resistant glass and other specialty sensors, please contact the Sensorex sales or technical support department. Specifications S260 Series yton Sensors Measuring ange material Max Temperature/Pressure Connector length Process Connection 0-14 (Sodium ion error >12.3) (S200 and S222 Series) or yton (S265-S269 Series, S271CD and S272CD) S265-S269 Series : 32-176 deg F ( 0-80 deg C))/70 psig S271CD and S272CD : 170 deg F (75 de C))/100 psig, 180 deg F (81 deg C)/85 psig, 212 deg F (100 deg C)/50 psig BNC, tinned wires (other connectors available for an additional charge) 30" or longer for S200 Series lengths at additional cost user specified (Cap-cable S653 required for S222 Series). 10ft length for S265-S269 series, 10ft waterproof cable for S271CD and S272CD 1/2" or 3/4" MNPT for submersion or in-line S222 Series Quick Disconnect Models Parts covered by this product data sheet include: S200C, S200CD, S222C, S222CD, S223C, S223CD, S224C, S224CD, S265C-S269CD, S271CD and S272CD, S272CDTC, S353CD, S354CD Page 1 of 6 Form: SpecsGenPurposeElectrodes [ev: 2011-06-16]
Low Cost Submersion and In-Line Electrodes in-line or submersion measurements. S222C S222CD S200C S200CD & S200CD-LC BNC eceptacle BUNA-N o-rings ef. 5.41" BNC eceptacle BUNA-N o-rings ef. 5.41" Blue top cap ef. 6.00" Blue top cap ef. 6.00" S223C S223CD S224C S224CD DIN CAP DIN CAP S6 (DIN 13.5 CAP) 13.5mm Threads S6 (DIN 13.5 CAP) 13.5mm Threads 5.9 (150mm) 3.5M KCl+AgCl Ag/AgCl eference Pelon eference bushing 6.0 (152mm) Pelon eference Silicon bushing 5.9 (150mm) 3.5M KCl+AgCl Ag/AgCl eference Pelon eference bushing 6.0 (152mm) Pelon eference Silicon bushing Page 2 of 6 Form: SpecsGenPurposeElectrodes [ev: 2011-06-16]
Low Cost Submersion and In-Line Electrodes in-line or submersion measurements. S353CD S354CD S6 (DIN 13.5 CAP) 13.5mm Threads 5.9 (150mm) 6.0 (152mm) Pelon eference Pelon eference HDPE eference HDPE eference Flat glass Flat glass FC50P and FC75P Amber Color Porous HDPE eference- S653 Cap and Flat Surface for Conduit use Glass (0.235 / 5.97mm ) DIN-EL Ext. for DIN Cap Models FC75TC Installation nut COAXIAL CABLE Connector for Controller Here Cap and cable 3/4" Modified Tee gripper S222CD spacer o-ring 1.60" Dimple x4 for grip 2.45" (62mm) Mates to DIN CAP or DIN13.5 FC75P fitting A part No. FC50P FC75P Dim A 3/4 NPT 0.83" (21mm) ATC Page 3 of 6 Form: SpecsGenPurposeElectrodes [ev: 2011-06-16]
Low Cost Submersion and In-Line Electrodes in-line or submersion measurements. S265C/CD DIA.48 0.75 0.875 Wrench flat elief S267C/CD DIA.48 0.79 3/4 NPT 1.00 Wrench Flat x 2 elief S268CD Porous HDPE eference DIA.48 0.75 Flat glass 0.235 DIA. 0.875 Wrench flat elief S269CD Porous HDPE eference DIA.65 0.80 3/4 NPT Flat glass 0.325 DIA. 0.875 Wrench flat elief S271CD HDPE j u n c t i o n 0. 65 D I A. ( 16. 5 m m ) 7.63 (193.8 mm) p H b u l b 3 / 4 N P T x 2 W r e n c h f l a t x 2 elief S272CD & S272TC FLAT GLASS HDPE j u n c t i o n 0. 65 D I A. ( 16. 5 m m ) Temp Sensor Inside stem(s272cdtc) 3 / 4 N P T X 2 W r e n c h f l a t x 2 7.63 (193.8 mm) Page 4 of 6 Form: SpecsGenPurposeElectrodes [ev: 2011-06-16]
Low Cost Submersion and In-Line Electrodes in-line or submersion measurements. Ordering Information These economical sensors are submersion and in-line ready by utilizing the 1/2" or 3/4 MNPT threads on the sensor. 10ft cable length is standard. Special lengths available upon request. Sensors Material Key Features (To order an OP model instead of, simply add - OP to the model numbers below.) S265C yton Single 1/2" NPT spherical bulb S265CD yton Double 1/2" NPT spherical bulb S267C yton Single 3/4" NPT spherical bulb S267CD yton Double 3/4" NPT spherical bulb S268CD yton Double 1/2" NPT flat surface S269CD yton Double 3/4" NPT flat surface S271CD yton Double 3/4" NPT spherical bulb, heavy duty S272CD yton Double 3/4" NPT flat surface, heavy duty S272CDTC yton Double 3/4" NPT flat surface, heavy duty with Temperature Sensor, Pt100 or Pt1000TD only Page 5 of 6 Form: SpecsGenPurposeElectrodes [ev: 2011-06-16]
Low Cost Submersion and In-Line Electrodes in-line or submersion measurements. Ordering Information These economical sensors can be used for submersion or in-line use. Mounting is accomplished by ordering the appropriate mounting gland listed below. Mounting glands Sensor S200C S200CD S200CD-LC S222C S222CD Type Single spherical style bulb Double spherical style bulb Low ionic, double, spherical style bulb Single spherical style bulb-quick disconnect Double spherical style bulb-quick disconnect 970796 Double flat glass-quick disconnect S223C S223CD S353CD Single spherical style bulb- DIN Cap Double spherical style bulb-din Cap Double flat glass-din Cap DIN 13.5 Threaded Cap Sensors - (Do not require mounting fitting. Mount via DIN 13.5 thread) Color coded buffers Sensor S224C S224CD S354CD Type Single spherical style bulb- DIN 13.5 Cap(S6) Double spherical style bulb-din 13.5 Cap(S6) Double flat glass-din 13.5 Cap(S6) TX100 2-wire transmitter Accessories FC50P FC75P FC75TC S653 EXT - DIN EL/"X" TX100 B104 B107 B110 1/2 " NPT mounting gland for 12mm electrodes 3/4 " NPT mounting gland for 12mm electrodes 3/4 "flow cell, mounting gland and ATC cable for 12mm electrodes Cap assembly for S222 series (Specify cable length and connector termination when ordering) Extension cable for DIN cap and DIN 13.5 electrodes (Series S223, S224, S354) 4-20mA loop-powered transmitter 1 pint 4.01 Buffer 1 Pint 7.00 Buffer 1 Pint 10.00 Buffer Page 6 of 6 Form: SpecsGenPurposeElectrodes [ev: 2011-06-16]