rimped conductors can be fastened in the corresponding connection chamber either by the direct plug-in technique or by means of screws. Electric screwdrivers Weidmüller screwdrivers are ideal one-hand tools due to their ergonomic design. They guarantee fatigue-free working in any installation direction. They also have an automatic torque limit and high repetition accuracy. Weidmüller bits The Weidmüller bits are standard bits with high quality, wide range and top-rate performance. Weidmüller uses processorcontrolled hardening processes to guarantee consistently high product quality. The high-grade material enables torques far above those stipulated in the relevant DI standards: DI 5261 for PH/PZ bits DI 5263 for slot bits amcar standard for TORX bits This means long service life at high torques, producing ideal conditions for standard work. Product benefits: Suitable for all screw driving tasks Ideal for both manual and machine screw driving tasks due to the high hardness values of 59 61 HR Good wear-resistance and therefore long service life Optimum fit in DI screws for low wear and optimum torque transmission Manufactured with consistently high product quality driven by the relevant ISO standards..44
Rechargeable torque screwdriver DMS 3 DMS 3 Set DMS 3 rechargeable torque screwdriver One-hand operation under all working conditions Switchable forward and reverse Two speeds: 200 and 400 rpm Precise torque settings from approx. 0.2... 3 m in 6 steps onsistent performance during battery discharge Grip swings easily from rod to pistol form Takes 1/4" bits held by ball-bearing clamping mechanism (form E6.3) Safety lock prevents inadvertent switch-on Easy changeover from battery drive to manual operation up to 15 m Technical data Screwdriver Motor Idling speed Max. torque huck Length Weight Battery Type Weight harger Input Output harging time Weight 2.4 V D 200/400 rpm 3.0 m 1/4" 6.3 DI 3126 239 mm 400 g 2 i-d batteries each 1.2 V 122 g 230 V A, 50 Hz, 50 ma 2.9 V A, 1.4 A, 4.1 VA 1 hour 700 g Ordering data Type Qty Order no. DMS 3 1 9007440000 Screwdriver incl. battery Type Qty Order no. DMS 3 set 1 (screwdriver incl. battery, 1 9007470000 charger, bits, plastic carrying case) DMS 3 set 2 (as set1 1 9007470000 with 1 additional battery) Accessories Type Qty Order no. Spare battery 1 9007450000 harger 1 9007460000 Delivery times see page X.2.45
Electric torque screwdriver DMS 2 Torque adjustable in four steps for standard screws M2.5 to 4 Selectable electric power-off when reaching a predefined torque High repetition accuracy Start in search-gear and switching to working rotation speed is controlled via the pressing power onto the screw head Switchable forward and reverse Fatigue-free working due to ergonomic design and low weight Ideal design for one-hand operation under all working conditions and at different working locations Low noise Low energy consumption Technical data Rated voltage Frequency Rated power urrent consumption Rpm of spindle in searching mode in working mode Torques Level 1 (M 2.5) Level 2 (M 3) Level 3 (M 3.5) Level 4 (M4) 230 V 50 Hz 45 W 0.2 A 350 min -1 700 min -1 0.5 ± 0.1 m 0.7 ± 0.15 m 1.2 ± 0.2 m 1.7 ± 0.25 m Weight incl. supply cable Weight oise level acc. to DI 45 634 0,990 kg 0,820 kg 58 db (A) Protection class II acc. to DI 57 740 DI/VDE 0740 T.1 and T.2 EM acc. to E directive 89/336/EE E mark Ordering data Standard equipment Type Qty Order no. DMS 2 with 1/4" drive 1 0664600000 Form 6.3 DI 3126 with hang-up clamp and 4 bits for slotted screws (50 mm) Dimensions of the blade 0.5 x 3 / 0.6 x 3.5 / 0.8 x 4 / 1.0 x 5.5 Accessories Balancer for hanging up the DMS 2 Type Qty Order no. BAL 2 (balancer for hanging up the DMS 2) 1 018180000.46 Delivery times see page X.2
Bits - drive A5.5 5.5 mm hexagon insert bit drive acc. to DI 3126, form A 5.5 for direct connection (for electric screwdriver Type DMS2 A 5.5) Bit A5.5 S Slot-head bits DI 5264, drive A5.5 DI 3126 A B Type Size A B Order no. BIT A5.5 0.5X3,0X50 0.5 3 50 0498500000 BIT A5.5 0.5X3,0X75 0.5 3 75 9024730000 BIT A5.5 0.6X3,5X50 0.6 4 50 0498600000 BIT A5.5 0.6X3,5X75 0.6 4 75 0535100000 BIT A5.5 0.8X4,0X50 0.8 4 50 0498700000 BIT A5.5 0.8X4,0X75 0.8 4 75 9024740000 BIT A5.5 0.6X4,5X50 0.6 5 50 9009220000 BIT A5.5 1.0X5,5X50 1.0 6 50 0498800000 BIT A5.5 1.0X5,5X125 1.0 6 125 0499100000 Bit A5.5 PH ross-head bits Type Phillips-Recess PH/DI 5260, drive A5.5 DI 3126 BIT A5.5 PH 1X50 1 50 0384800000 BIT A5.5 PH 1X75 1 75 0529900000 BIT A5.5 PH 2X50 2 50 0384900000 BIT A5.5 PH 2X125 2 125 0533600000 BIT A5.5 PH3x50 3 50 9009260000 Bit A5.5 PZ ross-head bits Type Pozidriv PZ/DI 5262, drive A5.5 DI 3126 BIT A5.5 PZ 1X50 1 50 9024850000 BIT A5.5 PZ 2X50 2 50 9024860000 BIT A 5.5 PZ3x50 3 50 9009300000 UBH 5.5 Universal bit holder, magnetic, drive: A5.5 DI 3126 output: 1/4 D6.3 UBH 5.5 9024890000 Bit-Box Weidmüller Bit-Box, 9-part with universal-holder drive: A5.5 DI 3126 output: 1/4 D6.3 bits 1/4 6.3 Bit-Box WI 9024900000 Delivery times see page X.2.47
Bits - drive 1/4 6.3 1/4 -hexagon insert bit drive acc. to DI 3126, form 6.3 for direct connection (DMS2 1/4 6.3) Bit 6.3 S Slot-head bits DI 5264, drive 1/4 6.3 DI 3126 A B Type Size A B Order no. BIT 6.3 0.5X3.0X39 0.5 3 39 9025500000 BIT 6.3 0.5X3.0X75 0.5 3 75 9024750000 BIT 6.3 0.6X3.5X39 0.6 4 39 9025510000 BIT 6.3 0.6X3.5X75 0.6 4 75 9024760000 BIT 6.3 0.5x4.0x25 0.5 4 25 9009310000 BIT 6.3 0.8X4.0X39 0.8 4 39 9025520000 BIT 6.3 0.8X4.0X75 0.8 4 75 9024770000 BIT 6.3 0,6x4,5x25 0.5 5 25 9009320000 BIT 6.3 1.0x5.5X39 1.0 6 39 9025530000 BIT 6.3 1.0X5.5X125 1.0 6 125 9024780000 Bit 6.3 PH ross-head bits type Phillips-Recess PH/DI 5260, drive 1/4 6.3 DI 3126 BIT 6.3 PH0x25 0 25 9009330000 BIT 6.3 PH1x25 1 25 9009340000 BIT 6.3 PH 1X50 1 50 9025540000 BIT 6.3 PH 1X75 1 75 9024830000 BIT 6.3 PH2x25 2 25 9009350000 BIT 6.3 PH 2X50 2 50 9025550000 BIT 6.3 PH 2X125 2 125 9024840000 Bit 6.3 PZ ross-head bits Type Pozidriv PZ/DI 5262, drive 1/4 6.3 DI 3126 BIT 6.3 PZ0x25 0 25 9009360000 BIT 6.3 PZ1x25 1 25 9009370000 BIT 6.3 PZ1X50 1 50 9024870000 BIT 6.3 PZ2x25 2 25 9009380000 BIT 6.3 PZ 2X50 2 50 9024880000 UBH 1/4 6.3 Universal bit holder, magnetic, drive: 1/4 6.3 DI 3126 output: 1/4 D6.3 UBH 1/4 6.3 9009620000 BHS 1/4 Bit holder with flexible shank for angled screwing, for all bits 1/4 drive 6.3 DI 3126 with SoftFinish-grip BHS 1/4 9009630000.48 Delivery times see page X.2
Bits-drive 1/4 6.3 1/4-male hexagon drive according to DI 3126, form 06.3 for direct connection (DMS3) Bit-Box DMS2 Weidmüller Bit-Box, 9-part with universal-holder drive: 1/4 6.3 DI 3126 output: 1/4 D6.3 bits 1/4 6.3 Type Size A B Order no. Bit-Box WI DMS 2 9024910000 Delivery times see page X.2.49
Bits - drive 1/4 E6.3 1/4 -hexagon insert bit drive acc. to DI 3126, form E6.3 for direct connection (DMS3) Bit E6.3 S Slot-head bits DI 5264, drive 1/4 E6.3 DI 3126 B Type Size A B Order no. BIT E6.3 0.5x3x50 0.5 3 50 9009410000 BIT E6.3 0.5X3.0X70 0.5 3 70 9024000000 BIT E6.3 0.6x3.5x50 0.6 4 50 9009420000 BIT E6.3 0.6X3.5X70 0.6 4 70 9024020000 BIT E6.3 0.8x4.0x50 0.8 4 50 9009430000 BIT E6.3 0.8X4.0X70 0.8 4 70 9024030000 BIT E6.3 1.0x5.5x50 1.0 6 50 9009440000 BIT E6.3 1.0X5.5X70 1.0 6 70 9024040000 Bit E6.3 PH ross-head bits Type Phillips-Recess PH/DI 5260, drive 1/4 E6.3 DI 3126 BIT E6.3 PH 1X70 1 70 9024080000 BIT E6.3 PH 2X70 2 70 9024090000 Bit E6.3 PZ ross-head bits Type Pozidriv PZ/DI 5262, drive 1/4 E6.3 DI 3126 BIT E6.3 PZ 1X70 1 70 9024100000 BIT E6.3 PZ 2X70 2 70 9024110000 UBH 1/4 E6.3 Universal bit holder, short, magnetic, drive: 1/4 E6.3 DI 3126, output: 1/4 D6.3 UBH 1/4 E6.3 9009520000 UBH SWH 1/4 licfix Universal quick-change holder with locking function and magnet. Real one-hand operation for quick bit changing 1/4 drive E6.3 DI 3126, output 1/4 D6.3 UBH SWH 1/4 9009510000.50 Delivery times see page X.2
Bits - drive 1/4 E6.3 1/4 -male hexagon drive acc. to DI 3126, Form E6.3 for direct connection (DMS3) Bit-Box DMS3 Weidmüller Bit-Box, 9-part with universal-holder drive 1/4 E6.3 DI 3126, output 1/4 D6.3 bits 1/4 6.3 Type Size A B Order no. Bit-Box WI DMS 3 9024970000 Delivery times see page X.2.51
Overview Weidmüller screwdrivers come in four different grip sizes, and are the result of a consistent grip concept which takes into account both the human hand and the different requirements when working Perfect handling with all grip sizes Maximum torques Optimum transmission of axial force omplete range including all commercial dimensions SoftFinish-grip With the SoftFinish zone for use in dry conditions and for general applications, Weidmüller offers a complete range of screwdrivers that enables far higher torques and at the same time substantially more comfort due to the soft material of the grip. Product benefits: Made of special soft material which is kind to the skin, the SoftFinish zone enables maximum torques Perfect ergonomic grip design for comfortable screw driving and optimum handling Version with solid steel tip can be used for chiselling You can choose from long-life extremely stressable blades in standard sizes hromtop blade tip offers maximum corrosion protection and greatest possible dimensional accuracy of the blade geometry in the screw head over many years SoftFinish electric VDE-insulated screwdriver according to DI E 60900, IE 900 for work on live equipment Product benefits: The protective insulation directly injected onto the screwdriver blade ensures electrical safety, even in critical applications Safe for working at up to 1500 volts D and 1000 volts A Each screwdriver is individually tested in a water bath at 10,000 volts according to DI E 60900 Perfect ergonomic grip design for comfortable screw driving and optimum handling Made of special soft material which is kind to the skin, the SoftFinish zone prevents slipping in critical situations and at the same time enables maximum torques.52
ombined cutting and screw driving tool that does not damage the edge; for cutting of copper cables with a diameter of up to 1.5 mm 2 solid and 2.5 mm 2 flexible. swifty swifty set swifty able cutting tool to mount on non-insulated screw drivers with a blade diameter of 3.5 mm Minimum manual force required Automatic opening of the cutter Ergonomically designed grip swifty set Efficient operation: Only one tool for cable-processing in ID-technology Suitable for screw and tension clamps Readily available pocket size for right-handed and left-handed use One-hand operation Technical data Maximum cutting performance opper cable: Solid cable (conductor cross-section) mm 2 Flexible cable (conductor cross-section) mm 2 1.5 2.5 Tool data Length/width/height Weight mm g 35 / 18 / 40 20 Ordering data Type Qty Order o. swifty (without screwdriver) 1 9006020000 Type Qty Order o. swifty set (with screwdriver) 1 9006060000 Screwdriver 1 9008330000 (SD 0.6 3.5x100) Delivery times see page X.2.53
VDE insulated Screwdriver VDE-insulated screwdriver sets, for working on live parts up to 1000 V A and 1500 V D. DI E 60900, IE 900. safety tested GS, checked individually. Blade made from high-alloy chromium-vanadiummolybdenum steel, through-hardened, browned SDI S VDE-insulated slot-head screwdriver, SDI DI 7437, ISO 2380/2, output acc. to DI 5264, ISO 2380/1, SoftFinish-grip Type Size / SW A B Order o. SDI 0.4X2.5X75 0.4 2.5 80 9008370000 SDI 0.5X3.0X100 0.5 3.0 100 9008380000 SDI 0.6X3.5X100 0.6 3.5 100 9008390000 SDI 0.8X4.0X100 0.8 4.0 100 9008400000 SDI 1.0X4.5X125 1.0 4.5 125 9008910000 SDI 1.0X5.5X125 1.0 5.5 125 9008410000 SDI 1.2X6.5X150 1.2 6.5 150 9008420000 SDI 1.6x8.0x175 1.6 8.0 200 9008430000 SDIK PH VDE-insulated crosshead screwdriver type Phillips, SDIK PH DI 7438, ISO 8764/2-PH, output acc. to DI 5260-PH, ISO 8764/1-PH, SoftFinishgrip SDIK PH0 0 60 9008560000 SDIK PH1 1 80 9008570000 SDIK PH2 2 100 9008580000 SDIK PH3 3 150 9008590000 SDIK PZ VDE-insulated crosshead screwdriver type Pozidriv SDIK PZ DI 7438, ISO 8764/2-PZ, output acc. to DI 5260-PZ, ISO 8764/1-PZ, SoftFinishgrip SDIK PZ1 1 80 9008900000 SDIK PZ2 2 100 9008890000 SDIT VDE-insulated Torx -screwdriver, SDIT SoftFinish-grip SDIT 10 10 80 9009640000 SDIT 15 15 80 9009650000 SDIT 20 20 80 9009660000 SDIT 25 25 80 9009670000 SDIT 30 30 100 9009680000 SDIT 40 40 150 9009690000 SKI VDE-insulated hexagon socket wrench, ISK SoftFinishh-grip ISK 5.0x129 5.0 125 9009000000 ISK 5.5x128 5.5 125 9008990000 ISK 6.0x128 6.0 125 9008980000 ISK 7.0x127 7.0 125 9008970000 ISK 8.0x127 8.0 125 9008960000 ISK 9.0x126 9.0 125 9008950000 ISK 10.0x126 10.0 125 9008940000 ISK 11.0x125 11.0 125 9008930000 ISK 13.0x125 13,0 125 9008920000.54 Delivery times see page X.2
VDE insulated Screwdriver VDE-insulated screwdriver sets Weidmüller SoftFinish electric for working on live parts up to 1000 V A and 1500 V D. DI E 60900, IE 900. safety tested GS, individually hecked SDIS 2.5-5.5/PH/1/2 6-part set: VDE-insulated slot-head and cross-head PH Screwdriver set Type Size / SW A B Order o. SDI 0.4x2.5x75 0.4 2.5 80 SDI 0.5x3.0x100 0.5 3.0 100 SDI 0.8x4.0x100 0.8 4.0 100 SDI 1.0x5.5x125 1.0 5.5 125 SDI PH 1 80 SDI PH 2 100 SDIS 2.5-5.5/PH1/2 9009730000 DMSI VDE-insulated torque-screwdriver E ISO 6789, BS E 26789, ASME B107.14M DMSI manual 0.5-1.7 0.5-1.7 m 9918390000 DMSI manual 2.0-8.0 2.0-8.0 m 9918400000 WK SI VDE-insulated interchangeable blades for VDE-insulated torquescrewdriver output according to DI 5264, ISO 2380/1 WK SI 0.4 x 2.5 max. 0.6 m 0.4 2.5 175 9918410000 WK SI 0.5 x 3.0 max. 0.6 m 0.5 3.0 175 9918420000 WK SI 0.6 x 3.5 max. 1.1 m 0.6 3.5 175 9918430000 WK SI 0.8 x 4.0 max. 2.5 m 0.8 4.0 175 9918440000 WK SI 1.0 x 5.5 max. 3.8 m 1.0 5.5 175 9918450000 WK IK PH VDE-insulated interchangeable blades for VDE-insulated torquescrewdriver output according to DI 5260-PH, ISO 8764/1-PH WK IK PH 0 max. 0.9 m 175 9918460000 WK IK PH 1 max. 3.8 m 175 9918470000 WK IK PH 2 max. 5.5 m 175 9918480000 WK IK PZ VDE-insulated interchangeable blades for VDE-insulated torquescrewdriver output according to DI 5260-PZ, ISO 8764/1-PZ WK IK PZ 0 max. 0.9 m 175 9918490000 WK IK PZ 1 max. 3.8 m 175 9918500000 WK IK PZ 2 max. 5.5 m 175 9918510000 Delivery times see page X.2.55
Uninsulated screwdriver Weidmüller SoftFinish screwdriver for general uses, blade made from high-alloy chromium-vanadium-molybdenum steel, through-hardened, matt chrome finish. SD S Slot-head screwdriver with circular blade SD DI 5265, ISO 2380/2, ouput acc. to DI 5264, ISO 2380/1, point chromium top, SoftFinish-grip Type Size / SW A B Order o. SD 0.4x2.0x60 0.4 2.0 60 9037160000 SD 0.4x2.5x75 0.4 2.5 75 9009030000 SD 0.5X3.0X80 0.5 3.0 80 9008320000 SD 0.6X3.5X100 0.6 3.5 100 9008330000 SD 0.6X3.5X200 0.6 3.5 200 9010110000 SD 0.8X4.0X100 0.8 4.0 100 9008340000 SD 1.2x6.5x150 1.2 6.5 150 9009010000 SD 0.8x4.5x125 0.8 4.5 125 9009020000 SD 1.0X5.5X150 1.0 5.5 125 9008350000 SDK PH rosshead screwdriver Type Phillips, SDK PH DI 5262, ISO 8764/2-PH, ouput acc. to DI 5260-PH, ISO 8764/1-PH, point chromium top, SoftFinish-grip SDK PH0 0 60 9008470000 SDK PH1 1 80 9008480000 SDK PH2 2 100 9008490000 SDK PH3 3 150 9008500000 SDK PZ rosshead screwdriver Type Pozidriv, SDK PZ DI 5262, ISO 8764/2- PZ, ouput acc. to DI 5260-PZ, ISO 8764/1-PZ, point chromium top, SoftFinish-grip SDK PZ0 0 60 9008520000 SDK PZ1 1 80 9008530000 SDK PZ2 2 100 9008540000 SDK PZ3 3 150 9008550000 SDTR Torx TR-screw driver with drill hole in the blade point (Tamper Resistant), SD TR for screwing of Torx and Torx -TR safety screws (centre pin in profile), point chromium top, SoftFinish-grip SDTR 8 8 60 9009190000 SDTR 10 10 80 9009180000 SDTR 15 15 80 9009170000 SDTR 20 20 100 9009160000 SDTR 25 25 100 9009150000 SDTR 30 30 115 9009140000 SK Hexagon socket wrench SK DI 3125, ouput acc. to DI 3125, SoftFinish-grip SK 5.0x125 5.0 125 9009130000 SK 5.5x125 5.5 125 9009120000 SK 6.0x125 6.0 125 9009110000 SK 7.0x125 7.0 125 9009100000 SK 8.0x125 8.0 125 9009090000 SK 9.0x125 9.0 125 9009080000 SK 10.0x125 10.0 125 9009070000 SK 11.0x125 11.0 125 9009060000 SK 12.0x125 12.0 125 9009050000 SK 13.0x125 13.0 125 9009040000.56 Delivery times see page X.2
Uninsulated screwdriver Set of interchangeable blades made from high-alloy chromiumvanadium-molybdenum steel, through-hardened, high-quality galvanised finish. System 11+1 S-PH-PZ-SK 12-part set of interchangeable blades for slot-head, cross-head PH/PZ and hexagon screws, SoftFinish-grip System 11+1 TW-TS-TR 12-part set of interchangable blades for screwing of Torx, Torq and Tri-Wing safety screws. Set S 2.5/3.0/4.0/5.5/PH 1/2 12-part set of interchangeable blades for slot-head, cross-head PH screwdriver set with circular blades Type Size / SW A B Order o. SD 0.5 3 140 SD 0.8 4 140 SD 1.0 5 140 SD 1.2 6 140 PH 1 1 140 PH 2 2 140 PZ 1 1 140 PZ 2 2 140 SK 3.0 3 140 SK 4.0 4 140 SK 5.0 5 140 System 11+1 9009750000 TW 1.0 140 TW 2.0 140 TW 3.0 140 TW 4.0 140 TS 6.0 140 TS 8.0 140 TR 10.0 140 TR 15.0 140 TR 20.0 140 TR 25.0 140 TR 30.0 140 System 11+1 Secur. 9009760000 SD 0.4x2.5x75 0.4 2.5 75 SD 0.5x3.0x80 0.5 3.0 80 SD 0.8x4.0x100 0.8 4.0 100 SD 1.5x5.5x125 1.0 5.5 125 SD PH 1 1 80 SD PH 2 2 100 SDS 2.5-5.5/PH1/2 9009740000 Set TR 10/15/20/25/30/40 6-part set: Torx screw driver with drill hole in the blade point SD TR 8 8 60 SD TR 10 10 80 SD TR 15 15 80 SD TR 20 20 100 SD TR 25 25 100 SD TR 30 30 150 SDS TR8-30 9009720000 SD STK Flat blade screwdriver with solid steel cap SD STK DI 5265, ISO 2380/2, ouput acc. to DI 5264, ISO 2380/1, can also be used as a chisel due to steel cap SoftFinish-grip SD STK 8x150 1.2 8 150 9009700000 SD STK 10x175 1.6 10 175 9009710000 Delivery times see page X.2.57
Screwdriver Torque-screwdriver Weidmüller SoftFinish DMS Torque-screwdriver E ISO 6789, BS E 26789, ASME B107.14M Type Size / SW A B Order o. DMS manual 0.5-1.7 0.5-1.7 m 9918370000 DMS manuell 2.0-8.0 2.0-8.0 m 9918380000 WK K PZ Interchangeable blades for torque-screwdriver output according to DI 5260-PZ, ISO 8764/1-PZ WK K PZ 0 max. 0.9 m 175 9918600000 WK K PZ 1 max. 3.8 m 175 9918610000 WK K PZ 2 max. 5.5 m 175 9918620000 WK K PH Interchangeable blades for torque-screwdriver output according to DI 5260-PH, ISO 8764/1-PH WK K PH 0 max. 0.9 m 175 9918570000 WK K PH 1 max. 3.8 m 175 9918580000 WK K PH 2 max. 5.5 m 175 9918590000 WK K S Interchangeable blades for torque-screwdriver output according to DI 5264, ISO 2380/1 WK S 0.4 x 2.5 max. 0.6 m 0.4 2.5 175 9918520000 WK S 0.5 x 3.0 max. 0.6 m 0.5 3.0 175 9918530000 WK S 0.6 x 3.5 max. 1.1 m 0.6 3.5 175 9918540000 WK S 0.8 x 4.0 max. 2.5 m 0.8 4.0 175 9918550000 WK S 1.0 x 5.5 max. 3.8 m 1.0 5.5 175 9918560000.58 Delivery times see page X.2
Wrench set Weidmüller Allen key in PocketStar Allen key made from high-alloy chromium-vanadium- steel, acc. to DI ISO 2936 L (DI 911), surface high-quality refined. SK WSD S 9-part offset screwdriver set in Prostar, with MagicRing: holds standard screws in any position thanks to spring steel ring (beginning with size 3), with spherical head: for angled screwing up to 25. Type Size / SW A B Order o. 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 SK WSD-S 1.5-10.0 9008850000 SK S 7-part allen key set 2.0 2.5 3.0 4.0 5.0 8.0 6.0 SK-S 2.0-8.0 9008860000 SK S 7-part allen key set with MagicRing and spherical head: holds standard screws in any position thanks to spring steel ring (beginning with size 3), with spherical head: for angeled screwing up to 25. 2,0 2,5 3,0 4,0 5,0 6,0 8,0 SK-S 2.0-8.0 MR 9008870000 TR S 8-part Torx TR-screw driver set with drill hole in the blade point (Tamper Resistant), for screwing of Torx and Torx -TR safety screws (centre pin in profile) 9 10 15 20 25 27 30 40 TR-S 9-40 9008880000 Delivery times see page X.2.59