ErP 27 IDUSTRIAL CETRIFUGAL FAS WITH VERY HIGH PRESSURE APPLICATIO High pressure industrial centrifugal fans with backward curved impeller, suitable for exhausting clean or slightly dusty air. They can be also used for pneumatic transport of solid materials mixed with air, like chips and sawdust (with a nontransited fan), fumes and fine dust, where high pressure levels are requested. COSTRUCTIO Volute made from sheet steel, epoxy powder coated. High efficient inlet cone made from sheet steel, epoxy powder coated. 8 RD orientations and n 8 LG. The units are supplied with RD0 orientation as standard. Fan in bolted orientable version. High efficient single inlet backward curved impeller, made from welded steel and epoxy powder painted. Impeller is statically and dynamically balanced in compliance with ISO 1-1 standard. Direct coupling with rotor keyed directly on the motor shaft supported by the pedestal (Es.). Asynchronous three-phase motor, IE2, with PTC, CE marked, IP55, F class, S1 service. IE2 motors with nominal rated power between 0,75kW and 75kW must be used with speed controller. FEATURES & BEEFITS Highly robust construction thanks to the material thickness and to the top quality coating. Wide range in terms of sizes and versions, beyond the fan selection included in this catalogue, to meet any ventilation needs: - Airflow Q = 110.000m /h. - Total pressure P tot = 22.000Pa. Operating temperature range from -10 C to + C. Tested to the latest standards, meaning accurate, up to date information on electrical safety, performance and noise level that can be relied upon. Designed and manufactured in accordance with Machinery Directive (MD), Low Voltage Directive (LVD), Electromagnetic Compatibility Directive (EMC) and Regulation 27/2011 (ERP Directive). UPO REQUEST Execution upto size 1. Execution 5 upto size. Execution 1,8 or 12 upto size. Execution upto size. Versions suitable for warmer fluid upto 150 C in case of directly coupled fans, and upto C for fans with transmission drive. IOX version or other special steel. ATEX version. IE motors. Top branded motors (e.g. Siemens). ACCESSORIES Inspection door. Drainage plug. Inlet grid, to be used in case of free inlet. Outlet grid, to be used in case of free outlet. Inlet counter-flange. Outlet counter-flange. Inlet anti-vibration mount. Outlet anti-vibration mount. Air-intake controller. Outlet opposing vane louvres. Round inlet silencers. Rectangular outlet silencers. Anti-vibration mounts. PLEASE COTACT AERAULIQA DIRECTLY FOR A SPECIFIC FA SELECTIO 206 IDUSTRIAL CATALOGUE
QPRER/2 (esec.) - 2 80 0,75 - - - - - 5 0,21 QPRE/2 (esec.) - 2 80 1,10 - - - - - 10 0,27 61 Ht [mmh2o] [Pa] 0 D = [mm] QPRE/2 VM kw PD² = 0.27 [kg x m²] 0 0 5 7 10 100 80 0 0 Cl.I 0 0.55 1 db(a) 2 0.7 1 0.25 1 0. 2 70 2 7 0.06 0.1 0.15 0.2 0. 0. 0.5 0.6 0.8 1 Q [m³/s] Q [m³/h] 1 0 0 v [m/s] 5 6 8 10 15 20 0 0 50 80 Hd [Pa] 10 15 20 0 0 80 150 1 0 0 Hd [mmh2o] 1 2 5 8 15 20 0 0 80 150 58 215 17 121 8 216 2 Ø21 175 1 5 Ø8 105 16 Ø12 55 Ø21 Ø5 80 20 225 275 Ø 225 217 QPRE/2 IDUSTRIAL CATALOGUE 207
QPRER/2 (esec.) - 2 1,50 - - - - - 1620 0,7 6 QPRE/2 (esec.) - 2 2,20 - - - - - 2 0,52 0 D = [mm] QPRE/2 VM 11 kw PD² = 0.52 [kg x m²] 0 0 0 5 7 7 100 80 0 0 0 Cl.I 0 2 1 db(a) 0.55 1 0.7 220 7 2550 0.1 0.15 0.2 0. 0. 0.5 0.6 0.8 1 Q [m³/s] Q [m³/h] 1 0 0 v [m/s] 6 8 10 15 20 0 0 50 80 Hd [Pa] 20 0 0 80 150 1 0 Hd [mmh2o] 2 5 8 10 15 20 0 0 80 150 Ø21 28 280 28 1 2 2 5 151 7 26 5 166 5 5 117 5 75 Siemens Motor 655 Ø275 2 5 251 Ø21 Ø205 Ø8 QPRE/2 208 IDUSTRIAL CATALOGUE
QPRER/2 (esec.) - 2 100 - - - - - 2520 1 QPRE/2 (esec.) - 2 - - - - - 20 1,20 70 1 D = [mm] QPRE/2 VM 11 15.5 kw PD² = 1.2 [kg x m²] 1 5 68 0 7 7 0 0 0 0 0 Cl.I 0 7 0 db(a) 2 1 0.55 220 1 2550 0.12 0.2 0. 0. 0.5 0.6 0.8 1 2 Q [m³/s] Q [m³/h] 1 0 0 0 v [m/s] 6 8 10 15 20 0 0 50 80 100 Hd [Pa] 20 0 0 80 150 1 0 0 Hd [mmh2o] 2 5 8 15 20 0 0 80 150 706 265 75 502 Siemens Motor Ø12 5 201 165 11 Ø265 706 21 255 28 2 28 2 502 17 28 52 Ø228 Ø8 Ø265 Ø28 QPRE/2 IDUSTRIAL CATALOGUE 20
QPRER/2 (esec.) - 2 - - - - - 20 1,0 70 QPRE/2 (esec.) - 2 12 5,5 - - - - - 1, 70 10 1 1 1 D = [mm] 11 QPRE/2 VM 15.5 22 0 kw 5 68 7 7 7 PD² = 1.6 [kg x m²] 0 6 0 0 0 Cl.II 0 Cl.I 0 7 db(a) 0 1 0 220 2 2550 1 1 0.15 0.2 0. 0. 0.5 0.6 0.8 1 2 Q [m³/s] Q [m³/h] 1 0 0 0 0 v [m/s] 5 6 8 10 15 20 0 0 50 80 100 Hd [Pa] 20 0 0 80 150 1 0 0 Hd [mmh2o] 2 5 8 15 20 0 0 80 150 2 27 8 5 277 21 Ø22 5 2 7 2 2 207 18 7 5 5 27 5 6 12 Ø255 Ø22 Ø25 QPRE/2 210 IDUSTRIAL CATALOGUE
QPRE5R/2 (esec.) - 2 12 7,50 - - - - - 680 2,50 7 QPRE5/2 (esec.) - 2 11 - - - - - 5,20 75 10 D = 5 [mm] QPRE5/2 VM5.5 22 0 7 5 kw PD² =.2 [kg x m²] 1 1 1 11 15 77 0 0 0 0 0 0 Cl.II Cl.I db(a) 0 6 2 2 2 1 75 87 1 81 8 1 0.2 0. 0. 0.5 0.6 0.8 1 2 5 Q [m³/s] 68 65 102 Q [m³/h] 1 0 0 0 0 10 v [m/s] 6 8 10 15 20 0 0 50 80 100 Hd [Pa] 20 0 0 80 150 1 0 0 0 Hd [mmh2o] 2 5 8 15 20 0 0 80 150 7 6 7 5 01 21 166 26 Ø2 75 875 5 0 265 Ø2 Ø65 Ø2 0 6 Ø12.5 QPRE5/2 IDUSTRIAL CATALOGUE 211
QPRER/2 (esec.) - 2 15 - - - - - 7,0 QPRE/2 (esec.) - 2,50 - - - - - 20,80 0 1 10 D = [mm] QPRE/2 VM 0 7 5 55 75 kw PD² =.8 [kg x m²] 1 1 10 1 1 0 0 0 0 0 0 0 11 15.5 22 Cl.III Cl.II Cl.I 2 1 81 1 87 8 1 0. 0. 0.5 0.6 0.8 1 2 5 Q [m³/s] 77 6 7 68 65 db(a) 102 2 2 Q [m³/h] 1 0 0 0 0 0 10 v [m/s] 8 10 15 20 0 0 50 80 100 Hd [Pa] 0 0 80 150 1 0 0 Hd [mmh2o] 5 8 10 15 20 0 0 80 150 8 81 7 Siemens Motor 28 22 Ø66 21 255 5 25 5 7 5 5 0 5 258 Ø Ø66 5 0 55 7 6 5 105 Ø20 Ø12.5 QPRE/2 212 IDUSTRIAL CATALOGUE