INNOVATIVE SOLUTIONS IN LIGHTING

Ce~ro CATALOG 3.2

INNOVATIVE SOLUTIONS IN LIGHTING Cero lights offer the intensity, durability, power, and beam patterns needed for heavy equipment in tough environments. We understand different equipment and job sites require a variety of configurations, no a one-size-fits-all light. Count on Jameson To Provide The Lighting Solution For Your Job! Cero lights have been field tested aboard the harshest platform available the hard-rock mining tracked dozer. Units were tested in every possible environmental extreme: high humidity, sub-zero freezing, dry desert, and 120+ degree coal mines. After several months usage, lights were returned to our lab for a thorough review of durability and performance. Built in the USA, every circuit assembly is inspected and tested by six separate processes, including robotic and manual microscopic imaging. The backbone of Cero lights, the chassis, with integrated heat sink, is CNC machines billet 6061-T6 aluminum alloy. With its extreme high strength and thermal conductivity, it is used in aviation. Holding it all together is 316 stainless steel. It offers maximum corrosion resistance even when exposed to salt spray and sulfuric acid, showing little to zero wear after years of exposure to harsh environments.

TABLE OF CONTENTS Beam Patterns... 1 Model Comparison... 2 Extreme Duty Lighting XD 9... 3 XD 16... 5 Heavy Duty Lighting HD 16... 7 HD 32... 9 HD 80... 11 Identity Lighting IDX... 13 Indicator Lighting ML 24... 17

Beam Patterns Spot Focused for far field viewing; needed for spot-lighting and high-speed driving. Medium Intermediate distance and area spread for applications requiring more coverage than Spot and higher light levels than Wide. Horizontal Elliptical Sharp vertical cutoffs for driving and operating applications that require greater distance, less glare and low light pollution, and wide angle illumination. Vertical Elliptical For applications requiring large vertical coverage, illuminating tall vertical surfaces without the need for wide spread lighting. Wide Beam Wide area flood pattern for illuminating large areas such as work sites or for use on tracked and slow moving equipment. Trapezoid For applications requiring automotive-style light distribution to reduce glare for oncoming drivers while offering wide area lighting below horizon. 1

Overview Model Comparison Model Overview LEDs Type Lumens Tilt Angles Shock Handling Wattage Options Input Voltage Options LED Colors Housing Dimensions Page XD-16 XD-9 Extreme Duty Designed for rugged environments requiring high shocking handling capabilities. Extreme Vibration Durability Extreme Shock Handling 16 9 Extreme Duty Lighting Extreme Duty Lighting 4,320-7,240-20º - +40º Extreme 85, 55, 35, 25 4,000-20º - +40º Extreme 45 10-32VDC 18-32VDC 10-32VDC 18-32VDC Amber 4.5 X 4.5 X 2.8 114.3 X 114.3 X 71.12mm 3.9 X 3.9 X 2.6 99 mm X 99mm X 67.3mm 5 3 HD-16 HD-32 HD-80 Heavy Duty Direct replacement for most standard equipment. Quick integration, improvement to OEM lights on tracked equipment. Little or no hot/dark spots to distract operator. High Vibration Durability Heavy Duty Shock Handling 16 32 80 Heavy Duty Lighting Heavy Duty Lighting Heavy Duty Lighting 3,890-6,300 7,500-12,300 24,800-33,480 360º -20º - +40º -20º - +40º -70º - +20º Heavy Duty Heavy Duty Heavy Duty 85, 55, 35, 25 170, 110, 70, 50 415, 270 10-32VDC 18-32VDC 10-32VDC 18-32VDC 18-32VDC 90-305VAC Amber Amber Amber 4.5 X 4.5 X 2.7 114mm X 114mm X 68.5 mm 8 X 4.9 X 2.7 203.2mm X 124.4mm X 68.5mm 18.5 X 6 X 2.9 469.9mm X 152.4mm X 73.66mm 7 9 11 Identification and Marker Lights IDX Alpha-numeric identifi cation displays for equipment identifi cation. Solid characters. ID Display 1-3 Characters 2 Brightness Levels Custom Characters 9-32VDC Yellow Blue Green Amber One Character 12.8 X 19.8 X 1.3 325 X 503 X 33mm Two Character 25.5 X 19.8 X 1.3 648 X 503 X 33mm Three Character 40.3 X 19.8 X 1.3 1024 X 503 X 33mm 13 ML High visibility indicator lamp penetrates thick layers of dust or mud buildup, fog, snow, and rain. Indicator Lamp 1,206 Lumens High-Low Brightness Heavy Duty 9-32VDC Amber 5.4 X 2.6 X 1.4 137 X 66 X 35.5mm 15 We will work with you to provide the ideal lighting solution, as shown by these recommendations for specific applications: Bulldozers - When operating on a sloped edge extending to the bottom of an open pit mine, dozers require area lighting in all directions. Lacking pneumatic tires to assist in isolating shock, lights must have high vibration durability. We recommend a 55 Watt or 85 Watt XD-16. Haul Trucks - Exceeding 40 mph and weighing up to 700 tons loaded, they operate on narrow roads with other equipment and require lights projecting 300+ meters without impairing other operators. We recommend 35 Watt or 55 Watt HD-16 or XD-16 lamp in a Spot or Horizontal Elliptical beam pattern. Lighting Solutions For Specific Applications Wheel Loaders - Used for maintenance of haul roads or loading tools, they have tight turning radii, work close to other machines and have large, air-filled tires to isolate shock. They require powerful area lighting that does not distract the operator. An HD-16 in 55 or 85 watt wide pattern works well in nearly every location for this machine. Shovels - Hydraulic or electric, they require wide area lighting. An HD-32 or HD-80 with wide beam illuminates the entire perimeter and angles that would be difficult for another lamp. Except in cases where a large amount of fog, rain, dust, or snow is constantly present, more light is always preferred. Contact Jameson s Customer Service Department For Assistance With Specific Applications Or Customized Lighting 2

Compact Extreme Duty Lighting Highest Shock Handling Capabilities The XD-9 features the same technologies found in the XD-16, but in a size that allows for easier integration in smaller areas. With the rugged construction of all Cero lamps, the XD-9 has extreme shock handling that allows it to be installed in nearly any environment for continuous use. The XD-9 also features chassis-ground isolation allowing it to be used with ground-fault detection systems without external galvanic isolation, making it perfect for marine applications. Features 9 LEDs Extreme Vibration Durability Extreme Shock Handling Waterproof Past 1 meter (Mil-IP69) XD-Lock Mount Housing: 3.9 X 3.9 X 2.65 (99 mm X 99 mm X 67.3mm) Housing is Type III Anodized Aluminum for Corrosion Protection (Mil-A-8625) Corrosion Resistant Stainless Steel Mounting Bracket and Hardware Ballistic Optic Bridge Gold Plated Circuit Board and Connector Contacts for Electrical Properties and Corrosion Resistance Advanced Thermal Management Reverse Polarity Protection Transient Voltage Protection LED Options Zero Warm Up Time - Instant On Flicker Free Light Waterproof Past One Meter (Mil-IP69K Seal) Versatile Mounting and Tilt Options Less Power Consumption and More Light than HID s Long Life Superior Hot and Cold Temperature Performance Power 45W Operating Voltage 10-32VDC or 18-32VDC Raw Lumens 4,780 Effective Lumens 4,000 Current @28VDC 1.6A Current @14VDC 3.2A Lifetime (hrs) 75,000 Trunnion Style Double w/ XD-Lock Polycarbonate Lens 1.95 lb (885kg) Borosilicate Lens 2.01 lb (912kg) Sealing IP69K Tilt Angles -20 to +40 Operating Temperature -75 C to +90 C 3

XD-9 Part Numbers and Options Several options are available for Cero lights. Below is a chart to identify part number for a light built to your specifications. As an example, this is part number XD9-DT-45W10NW-GDBSSW: XD-9 Lamp with Deutsch Connection, 45W, 10-32VDC, Natural LED Color, Borosilicate Glass Lens, Double Trunnion Mount, Black Chassis, Stainless Bracket, Stainless Hardware and Wide Beam XD9 DT 45W 10 NW G D B S S W Connection Power Input Voltage LED Color Lens Mount Style Chassis Finish Bracket Finish Hardware Finish Beam Pattern DT Deutsch Style 45W 10 10-32VDC NW Natural G Borosilicate Glass D Double Trunnion B Black Anodize S Stainless S Stainless S Spot XD9 MS Amphenol 18 18-32VDC WW Warm P Polycarbonate Plastic S Silver Anodize CG Cable Gland AM Amber W P B W Black P P B Black M Medium V Vertical Elliptical RO Orange H Horizontal Elliptical W T Wide Trapezoid Other Options Dimming Capability

Extreme Duty Lighting Highest Shock Handling Capabilities The XD-16 was designed for extremely rugged environments requiring high shock handling. It provides the most light output of any similarly sized lamp with the highest vibration handling capability. Over two years of testing the HD-16 went into making the XD-16 the ultimate work light featuring lens isolation, ballistic optical bridging, the revolutionary XD-Lock system and an integrated fiber-reinforced nylon Deutsch DT compatible connector. Features 16 LEDs Large Amount of Area Light Extreme Vibration Durability Extreme Shock Handling XD-Lock Mount Housing: 4.5 X 4.5 X 2.8 (114.3 X 114.3mm X 71.12mm) Housing is Type III Anodized Aluminum for Corrosion Protection (Mil-A-8625) Corrosion Resistant Stainless Steel Mounting Bracket and Hardware FCC and EU EMI Compliant Ballistic Optic Bridge Gold Plated Circuit Board and Connector Contacts for Electrical Properties and Corrosion Resistance Advanced Thermal Management Reverse Polarity Protection Transient Voltage Protection LED Options Zero Warm Up Time - Instant On Flicker Free Light Waterproof Past One Meter (Mil-IP69K Seal) Versatile Mounting and Tilt Options Less Power Consumption and More Light than HID s Long Life Superior Hot and Cold Temperature Performance Power 85W 55W 35W Operating Voltage 10-32VDC or 18-32VDC Raw Lumens 8,640 7,080 5,160 Effective Lumens 7,240 5,910 4,320 Current @28VDC 3.0A 2.0A 1.3A Current @14VDC 6.1A 3.9A 2.5A Lifetime (hrs) 65,000 85,000 125,000 Trunnion Style Double w/ XD-Lock Polycarbonate Lens 3.04 lb (1.35kg) Borosilicate Lens 3.11 lb (1.38kg) Sealing IP69K Tilt Angles -20 to +40 Operating Temperature -75 C to +90 C 5

XD16 Part Numbers and Options Several options are available for Cero lights. Below is a chart to identify part number for a light built to your specifications. As an example, this is part number XD16-DT-85W10NW-GDBSSW: XD16 Lamp with Deutsch Connection, 85W, 10-32VDC, Natural LED Color, Borosilicate Glass Lens, Double Trunnion Mount, Black Chassis, Stainless Bracket, Stainless Hardware and Wide Beam Pattern. XD16 DT 85W 10 NW G D B S S W Connection Power Input Voltage LED Color Lens Mount Style Chassis Finish Bracket Finish Hardware Finish Beam Pattern DT Deutsch Style 85W NW Only 10 10-32VDC NW Natural G Borosilicate Glass D Double Trunnion B Black Anodize S Stainless S Stainless S Spot XD16 MS Amphenol 55W NW Only CG Cable Gland 35W NW or RO 18 18-32VDC WW Warm P Polycarbonate Plastic S Silver Anodize AM Amber W P B W Black P P B Black M Medium V Vertical Elliptical 25W AM Only RO Orange H Horizontal Elliptical W Wide T Trapezoid Other Options Dimming Capability

Heavy Duty LED Light Offers Big Power In A Small Size High Shock Handling Capabilities A direct replacement light for most standard equipment, the HD-16 is designed for quick integration and improvement to OEM lights on tracked equipment. With little or no hot/dark spots to distract the operator, this powerful area light can be installed anywhere. An integrated shock damping system absorbs high-frequency vibration. Versatile mounting options with double or single trunnion mounts. The single trunnion allows for 360 degrees of tilt and rotation to be mounted on any surface angle, including vertical. Non-wicking, sealed harness can be specified to any length, allowing remote electrical connection. Zero Warm Up Time - Instant On Flicker Free Light Waterproof Past One Meter (Mil-IP69K) Versatile Mounting and Tilt Options Less Power Consumption and More Light than HID s Long Life Superior Hot and Cold Temperature Performance Features 16 LEDs Versatile Mounting Little or No Hot or Dark Spots To Distract Operator High Vibration Durability Heavy Duty Shock Handling Compact Lamp Housing: 4.5 X 4.5 X 2.7 (114mm X 114mm X 68.58mm deep) Housing is Type II Anodized Aluminum for Corrosion Protection (Mil-A-8625) Corrosion Resistant Stainless Steel Mounting Bracket and Hardware Gold Plated Circuit Board and Connector Contacts for Electrical Properties and Corrosion Resistance Advanced Thermal Management Reverse Polarity Protection Transient Voltage Protection Power 85W 55W 35W Operating Voltage 10-32VDC or 18-32VDC Raw Lumens 7,700 6,780 4,750 Effective Lumens 6,300 5,560 3,890 Current @28VDC 3.0A 2.0A 1.3A Current @14VDC 6.1A 3.9A 2.5A Lifetime (hrs) 55,000 75,000 105,000 Trunnion Style Single Double Polycarbonate Lens Borosilicate Lens 2.73 lb (1.21kg) 2.78 lb (1.24kg) 2.91 lb (1.29kg) 2.96 lb (1.32kg) Sealing IP69K IP69K Tilt Angles 360-20 to +40 Operating Temperature -75 C to +90 C -75 C to +90 C 7

HD-16 Part Numbers and Options Several options are available for Cero lights. Below is a chart to identify part number for a light built to your specifications. As an example, this is part number HD16-DT-85W10NW-GDBSSW: HD-16 Lamp with Deutsch Connection, 85W, 10-32VDC, Natural LED Color, Borosilicate Glass Lens, Double Trunnion Mount, Black Chassis, Stainless Bracket, Stainless Hardware and Wide Beam HD16 CG 85W 10 NW G S B S S W Connection Power Input Voltage LED Color Lens Mount Style Chassis Finish Bracket Finish Hardware Finish Beam Pattern HD16 CG Cable Gland 85W 55W NW Only NW Only 10 10-32VDC NW Natural 18 18-32VDC WW Warm G P Borosilicate Glass Polycarbonate Plastic D S Double Trunnion B Black Anodize Single Trunnion S Silver Anodize 35W AM Amber W P RO Orange S Stainless S Stainless S Spot B W Black P P B Black M Medium V W H Vertical Elliptical Wide Horizontal Elliptical T Trapezoid Other Options Type III Anodized Housing 8

High Power Flood Light with 32 LEDs Heavy Duty Shock Handling Capabilities The HD-32 is ideal for large tracked equipment requiring smooth, high-contrast lighting in a large area. It can withstand high vibration while providing perimeter and angle lighting that would be difficult for other lamps. This flood light is for applications that see little or no air flow. It features advanced dual-zone thermal management to monitor and cool the left and right sides independently. With two completely independent electrical circuits, this lamp is designed for hard to reach locations requiring a large amount of clear light. When replacing antiquated quartz halogen lamps, there is a drastic reduction in energy consumption. In many cases, the HD-32 can replace a 1000W filament lamp and reduce power consumption by more than 80% while offering 50% more light. Zero Warm Up Time - Instant On Flicker Free Light Waterproof Past One Meter (Mil-IP69K Seal) Versatile Mounting and Tilt Options Less Power Consumption and More Light than HID s Long Life Superior Hot and Cold Temperature Performance Features 32 LEDs Illuminates Large Perimeter Angled Lighting High Vibration Durability Heavy Duty Shock Handling Housing Dimensions: 8 X 4.9 X 2.7 (203.2mm X 124.46mm X 68.58mm) Housing is Type II Anodized Aluminum for Corrosion Protection (Mil-A-8625) Corrosion Resistant Stainless Steel Mounting Bracket and Hardware Gold Plated Circuit Board and Connector Contacts for Electrical Properties and Corrosion Resistance Advanced Dual Zone Thermal Management Reverse Polarity Protection Transient Voltage Protection LED Options Power 170W 110W 70W Operating Voltage 10-32VDC or 18-32VDC Raw Lumens 15,560 13,560 9,500 Effective Lumens 12,300 10,700 7,500 Current @28VDC 6.1A 3.9A 2.5A Current @14VDC 12.3A 7.9A 5.0A Lifetime (hrs) 55,000 75,000 105,000 Trunnion Style Double Polycarbonate Lens 5.13 lb (2.28kg) Borosilicate Lens 5.29 lb (2.35kg) Sealing IP69K Tilt Angles -20 to +40 Operating Temperature -75 C to +90 C 9

HD-32 Part Numbers and Options Several options are available for Cero lights. Below is a chart to identify part number for a light built to your specifications. As an example, this is part number HD32-CG-170W10NW-GDBSSW: HD-32 Lamp with Cable Gland, 170W, 10-32VDC, Natural LED Color, Borosilicate Glass Lens, Double Trunnion Mount, Black Chassis, Stainless Bracket, Stainless Hardware and Wide Beam HD-32 CG 170W 10 NW G D B S S W HD32 Connection CG Cable Gland 170W Power NW Only DT Deutsch Style 110W NW Only 70W 50W NW Only AM & RO Only Input Voltage 10 10-32VDC NW Natural 18 18-32VDC WW Warm LED Color Lens Mount Style Chassis Finish G P Borosilicate Glass Polycarbonate Plastic D Double Trunnion B Black Anodize S Silver Anodize AM Amber W P RO Orange Bracket Finish Hardware Finish Beam Pattern S Stainless S Stainless S Spot B W Black P P B Black M Medium V W H Vertical Elliptical Wide Horizontal Elliptical T Trapezoid Other Options Type III Anodized Housing 10

Heavy Duty Flood Light with 80 LEDs High Shock Handling Capabilities The HD-80 is the most reliable, powerful, and efficient LED flood light. Designed to withstand the harshest of environments, it features 80 LEDs with 6 control circuits, and 24 protection circuits. Recommended for perimeter and angle illumination, the double trunnion bracket features 90 degrees of tilt (70º down and 20º up). The chassis sits forward of the base to achieve 70 degrees of downward tilt without beam cutoff from the bracket. If you are accustomed to the flexibility of changing bulbs and ballasts on metal halide and sodium lamps; this light offers the same flexibility but on a maintenance interval five times longer. The HD-80 415 watt lamp overpowers the typical 1,000 watt metal halide or sodium lamps while consuming less than half the power, greatly decreasing the cost of energy to operate the machine. Zero Warm Up Time - Instant On Flicker Free Light Waterproof Past One Meter (Mil-IP69K Seal)) Versatile Mounting and Tilt Options Less Power Consumption and More Light than HID s Long Life Superior Hot and Cold Temperature Performance Features 80 LEDs Illuminates Large Perimeter Angled Lighting High Vibration Durability Heavy Duty Shock Handling 90 Degree Tilt Housing: 18.5 X 6 X 2.9 (469.9mm X 152.4mm X 73.66mm) Housing is Type II Anodized Aluminum for Corrosion Protection (Mil-A-8625) Corrosion Resistant Stainless Steel Mounting Bracket and Hardware Gold Plated Circuit Board and Connector Contacts for Electrical Properties and Corrosion Resistance Advanced 6-Zone Thermal Management Reverse Polarity Protection Transient Voltage Protection LED Options Power 415W 270W Operating Voltage 20-32VDC or 90-305VAC* Raw Lumens 42,660 31,600 Effective Lumens 33,480 24,800 Current @28VDC 14.8A 9.7A Lifetime (hrs) 55,000 85,000 Trunnion Style Double Polycarbonate Lens 15.88 lb (7.06kg) Borosilicate Lens 16.40 lb (7.29kg) Sealing IP69K Tilt Angles -70 to +20 Operating Temperature -75 C to +90 C 11

HD-80 Part Numbers and Options Several options are available for Cero lights. Below is a chart to identify part number for a light built to your specifications. As an example, this is part number HD80-CG-415W18NWGDBSSW HD-80 Lamp with Cable Gland, 415W, 18-32VDC, Natural LED Color, Borosilicate Glass Lens, Double Trunnion Mount, Black Chassis, Stainless Bracket, Stainless Hardware and Wide Beam HD80 CG 415W 18 NW G D B S S W HD80 Connection Power Input Voltage CG Cable Gland 415W 18 18-32VDC NW Natural 270W AC 90-305VAC WW Warm LED Color Lens Mount Style Chassis Finish G P Borosilicate Glass Polycarbonate Plastic D Double Trunnion A AC/DC Bracket B S Black Anodize Silver Anodize AM Amber W P RO Orange Bracket Finish Hardware Finish Beam Pattern S Stainless S Stainless S Spot B W Black P P B Black M Medium V W H Vertical Elliptical Wide Horizontal Elliptical T Trapezoid Other Options Type III Anodized

Alpha-Numeric Identification Displays Equipment identification impacts safety, requiring extremely reliable and clear communication of characters. Designed to offer the highest level of reliability, the IDX display panel is the only one of its kind that has a hardened borosilicate lens option, dual o-ring seals, a billet aluminum chassis, and gold plated mil-spec connector. We even added additional segments to the character to center the number 1 to prevent visual blending with adjacent characters. All programming is stored in a Non-Volatile Memory Chip, which will not forget what to display. Features 2 Preset Brightness Levels Selectable Dimming Removable Program Chip Solid Characters Centered Number 1 Dual O-Rings Gold Plated Circuit Board and Connector Contacts for Electrical Properties and Corrosion Resistance MIL-C-26482 Series II Connector 6061-T6 Chassis Native Coloring IDX1 IDX2 IDX3 Number of LEDs 692 1,384 2,076 Power RED, YEL 0-42W 0-84W 0-126W Power BLU, GRN 0-60W 0-120W 0-180W Operating Voltage 9-32VDC 9-32VDC 9-32VDC Ingress Protection IP69K IP69K IP69K Polycarbonate Lens 11.7lb (5.2kg) 24.3lb (10.8kg) 35.3lb (15.7kg) Borosilicate Lens 13.3lb (5.9kg) 27.5lb (12.2kg) 40.3lb (17.9kg) Lifetime (hrs) 65,000 65,000 65,000 13

IDX Part Numbers and Options Below is a chart to identify part number for a light built to your specifications. As an example, this is part number IDX-1-18YEL-1515GB IDX Display with 1 digit, 18 size, yellow, 15 power, 15 power2, borosilicate glass, black chassis IDX 1 18 YEL 15 15 G B Model IDX Number of Digits Digit Size LED Color PWR1 (ma) PWR2* (ma) Lens Type 1 18 YEL Yellow 25 20 G Borosilicate Glass Polycarbonate 2 BLU Blue 10 15 P Plastic 3 GRN Green 15 4 AMB Amber Chassis Color B Black Options Type III Anodized Housing Custom Bracket Customized Characters (Alpha and Numeric) RED WHT

Coming Soon High Visibility Indicator Lamp For Off Road The ML-24 was designed for applications requiring high indicator light levels. While most marker lamps are intended for use on highways, the ML-24 penetrates thick layers of dust or mud buildup, fog, snow, and rain. The ML-24 indicator lamp features the same robust protection and reliable circuits as our XD line of work lamps to prevent failure. It is fully encapsulated and features a hardened borosilicate lens to ensure no water intrusion. The ultimate upgrade to off-highway equipment. Features Hi-Lo Brightness Low Power Consumption Type II Anodized Housing for Corrosion Proection UV Filtered Borosilicate Lens Full Encapsulation Advanced Thermal Management Reverse Polarity Protection Wide Voltage Input Range Options Type III Anodized Housing Various Harness Lengths Preset Brightness LED Colors DOT DOT Amber Max Power 8-20W Operating Voltage 9-32VDC Raw Lumens 1,340 Effective Lumens 1,206 Current @28VDC <700mA Ingress Protection IP69K Weight 290 grams Shock Handling >200G RMS Lifetime (hrs) 100,000 Expected Availability Q3 2014 DOT DOT Amber Part Number ML24-R ML24-A 15

CERO GUARANTEES EVERY PRODUCT THAT THEY DESIGN AND MANUFACTURE WILL OUTPERFORM ANYTHING ELSE IN THE WORLD. Your authorized dealer: Western Region: 1-866-458-0101 Eastern Region: 1-800-881-9828 smsequip.com