Page /0 JUMO MIDAS S07 MA OEM Pressure Transmitter - Maritime Approved Applications In the shipping and offshore sector: HVAC (heating, ventilating, and air conditioning) Refrigeration engineering Compressors Engines Separators Pumps Brief description The JUMO MIDAS S07 MA pressure transmitter is available with both relative and absolute pressure measuring ranges. The fully welded measuring system (without seals) made of high-grade stainless steel allows this device to be used in almost all media even when the conditions are rough. The structure ensures optimum protection against process medium leakage. The device features a silicon sensor that is extremely resistant to overloading even in the lowest measuring ranges and is capable of handling millions of pressure cycles. Type 400 with M connector Type 400 with cable socket Customer benefits Economic A high degree of automation (digital compensation and calibration of sensor module) reduces production time and manufacturing costs. Process-reliable The piezoresistive silicon sensor has long-term stability and a high level of overload protection. The full final inspection in the fully automated measuring and calibration facility ensures that each pressure transmitter is of high quality. Time-saving, uncomplicated, and versatile The installation of the measuring device requires little work and the electrical installation is simple. The modular structure allows universal use in almost any application. Special features Maritime approved to 00 bar relative pressure, and also up to 5 bar absolute pressure High degree of process reliability due to a welded measuring system with no seals Robust and maintenance-free measurement technology thanks to extreme overload resistance Robust construction guarantees a long operating life Parts in contact with media are made of stainless steel Approvals/approval marks
Page /0 Technical data General Information Reference conditions DIN 6086 and DIN EN 60770 Sensor Material Silicon sensor with stainless steel separating membrane Pressure transfer medium Synthetic oil Admissible load changes > 0 million Position Mounting position Any Calibration position Device upright, process connection at the bottom Measuring range and accuracy Measuring range Linearity a Accuracy at Long-term 0 C d -0 C to +00 C e stability b Overload capacity c Burst pressure bar % MSP f % MSP % MSP % MSP bar bar per year 0 bar to bar relative/absolute pressure 0. 0.6.5 0. 4 6 0 bar to.6 bar relative/absolute pressure 0.5 0.5.4 6 0 0 bar to.5 bar relative/absolute pressure 0.5 0.5. 0 5 0 bar to 4 bar relative/absolute pressure 0.5 0.5. 6 4 0 bar to 6 bar relative/absolute pressure 0.5 0.5. 4 6 0 bar to 0 bar relative/absolute pressure 0.5 0.5.0 40 60 0 bar to 6 bar relative/absolute pressure 0. 0.5.0 60 00 0 bar to 5 bar relative/absolute pressure 0. 0.5.0 00 50 0 bar to 40 bar relative pressure 0. 0.5.0 00 50 0 bar to 60 bar relative pressure 0. 0.5.0 80 50 0 bar to 00 bar relative pressure 0. 0.5.0 80 50 - to 0 bar relative pressure 0. 0.6.5 4 6 - bar to +0.6 bar relative pressure 0. 0.6.5 6 0 - bar to +.5 bar relative pressure 0. 0.6.4 0 5 - bar to + bar relative pressure 0. 0.5. 6 4 - bar to +5 bar relative pressure 0.5 0.5. 4 6 - bar to +9 bar relative pressure 0.5 0.5. 40 60 - bar to +5 bar relative pressure 0.5 0.5.0 60 00 - bar to +4 bar relative pressure 0. 0.5.0 00 50 a Linearity according to limit point setting b Reference conditions EN 698- c All pressure transmitters are vacuum-proof. d Includes: linearity, hysteresis, repeatability, deviation of measuring range initial value and measuring range end value e Includes: linearity, hysteresis, repeatability, deviation of measuring range initial value and measuring range end value, thermal effect on measuring range start and measuring span f MSP = measuring span
Page /0 Output Analog output Current Output 405 4 to 0 ma, two-wire Voltage Output 45 0 V to 0 V, three-wire Output 48 V to 5 V, three-wire Output 40 V to 6 V, three-wire Step response T 90 5ms Burden Current 4 to 0 ma, two-wire (output 405) R L (U B -8 V) 0.0 A (Ω) Voltage 0 V to 0 V, three-wire (output 45) R L 0 kω V to 5 V, three-wire (output 48) R L 0 kω V to 6 V, three-wire (output 40) R L 0 kω Mechanical features Process connection Material Stainless steel 04 a Membrane Material Stainless steel 6 L Case Material Stainless steel 04 Electrical connection Material Attached cable PBT-GF0, PVC, PE (electrical connection ) Round plug M PBT-GF0, stainless steel 0 (electrical connection 6) Plug connector PBT-GF0 (electrical connection 60) Cable socket PBT-GF0, PA, silicone (electrical connection 6) Weight 80 g with G /4 (process connection 50) a Pressure transmitters with process connection 5 are supplied with an FPM seal. Ensure the medium durability of the seal material!
Page 4/0 Environmental influences Admissible temperatures for Medium Ambiance Storage Attached cable -40to+5 C -40to+00 C -40to+00 C (electrical connection ) Roundplug M -40to+5 C -40to+5 C -40to+5 C (electrical connection 6) Cable socket -40to+5 C -40to+5 C -40to+5 C (electrical connection 6) Admissible humidity Operation 00 % rel. humidity including condensation on the device outer case Storage 90 % rel. humidity without condensation Admissible mechanical load Vibration resistance a 0 g at 0 to 000 Hz Shock resistance b 50 g for ms 00g for ms Electromagnetic compatibility Interference emission c Class B d Interference immunity c Industrial requirement Protection type e Attached cable (electrical connection ) Relative pressure measuring range IP66 Absolute pressure measuring range IP67 Round plug M f IP66 (electrical connection 6) Plug connector IP0 (electrical connection 60) Cable socket e, g IP65 (electrical connection 6) a IEC 60068--6 b IEC 60068--7 c EN 66-- d The product is suitable for industrial use as well as for households and small businesses. e EN 6059 f The protection type is only achieved with a suitable mounted counter piece. g Connecting cable diameter, minimum 6 mm, maximum 8 mm Auxiliary power Voltage supply U B a 4 to 0 ma, two-wire (output 405) DC 0 to 5 V, rated voltage supply DC 4 V 0 V to 0 V, three-wire (output 45) DC 5 to 5 V, rated voltage supply DC 4 V V to 5 V, three-wire (output 48) DC 0 to 5 V, rated voltage supply DC 4 V V to 6 V, three-wire (output 40) DC 0 to 5 V, rated voltage supply DC 4 V Current consumption 5 ma Reverse voltage protection Yes Electrical circuit SELV Requirement The device must be equipped with an electrical circuit that meets the requirements of EN 600- with regard to Limited-energy circuits. a Residual ripple: the voltage peaks must not exceed or fall below the specified voltage supply values!
Page 5/0 Approvals/approval marks Approval mark Testing agency Certificate/certification number Inspection basis Valid for DNV GL DNV GL TAA0000JS Class Guideline Type 400 DNV GL-09
Page 6/0 Dimensions Electrical connection 6 Attached cable Round plug M Ø 4.6 4 Ø 8.6 95 67 Ø 6.5 Mx 4 60 6 Plug connector Cable socket
Page 7/0 Process connection 50 50 504 G /8 G /4 G / 4 4 4 4 8 9 ø.5 ø4 ø8 G/8 * Ø.5 ø6 ø7.5 6 G/ 5 5 56 /4-8 NPT G /4 7/6-0 UNF 4 4 5 0 Ø.5 Ø.5 ** /4-8 NPT G/4 A ** Ø 9.5.5 Ø 9.5 7/6-0 UNF 4.5 Ø.5 4 56 7/6-0 UNF interior 4 7 7 7/6-0 UNF B Ø A Profile seal G /4 B With valve core handle * Extra code 60 pressure channel Ø mm ** Extra code 60 pressure channel Ø 8 mm
Page 8/0 Connection diagram The connection diagram in the data sheet provides preliminary information about the connection options. For the electrical connection, only use the installation instructions or the operating manual. The knowledge and the correct technical compliance with the safety information and warnings contained in these documents are mandatory for mounting, electrical connection, and startup as well as for safety during operation. Connection Terminal assignment a 4 4 ma to 0 ma, two-wire (output 405) Voltage supply DC 0 to 5 V 0 V to 0 V, three-wire (output 45) Voltage supply DC 5 to 5 V V to 5 V, three-wire (output 48) V to 6 V, three-wire (output 40) Voltage supply DC 0 to 5 V U B /S+ 0V/S- U B 0V/S- S+ U B 0V/S- S+ 6 60 Attached cable Round plug M Plug connector 6 Cable socket WH BN WH BN GN WH BN GN Functional bonding conductor FB b - 4 a b Figure: Connection to the pressure transmitter The pressure transmitter has to be connected to the potential equalization system of the plant via the electrical connection or process connection. Colour coding: connecting cable round plug M BN Brown WH White BU Blue 4 BK Black The colour coding is only valid for A-coded standard cables!
Page 9/0 Order details () Basic type 400 JUMO MIDAS S07 MA OEM Pressure Transmitter () Basic type extension 000 None 999 Special version () Input (measuring range) 454 0 to bar relative pressure 455 0 to.6 bar relative pressure 456 0 to.5 bar relative pressure 457 0 to 4 bar relative pressure 458 0 to 6 bar relative pressure 459 0 to 0 bar relative pressure 460 0 to 6 bar relative pressure 46 0 to 5 bar relative pressure 46 0 to 40 bar relative pressure 46 0 to 60 bar relative pressure 464 0 to 00 bar relative pressure 478 - to 0 bar relative pressure 479 - to +0.6 bar relative pressure 480 - to +.5 bar relative pressure 48 - to + bar relative pressure 48 - to +5 bar relative pressure 48 - to +9 bar relative pressure 484 - to +5 bar relative pressure 485 - to +4 bar relative pressure 488 0 to bar absolute pressure 489 0 to.6 bar absolute pressure 490 0 to.5 bar absolute pressure 49 0 to 4 bar absolute pressure 49 0 to 6 bar absolute pressure 49 0 to 0 bar absolute pressure 494 0 to 6 bar absolute pressure 495 0 to 5 bar absolute pressure 998 Special measuring range for absolute pressure 999 Special measuring range for relative pressure (4) Output 405 4 to 0 ma, two-wire 45 0 V to 0 V, three-wire 48 V to 5 V, three-wire 40 V to 6 V, three-wire 999 Special version (5) Process connection 50 G /8 according to DIN EN 87 50 G /4 according to DIN EN 87 504 G / according to DIN EN 87 5 /4-8 NPT according to DIN EN 87 5 G /4 according to DIN 85-56 7/6-0 UNF 56 7/6-0 UNF interior, with valve core handle
Page 0/0 999 Special version (6) Process connection material 0 CrNi (stainless steel) (7) Electrical connection Attached cable a 6 Round plug M 60 Plug connector DIN EN 750-80, Form A, ex DIN 4650 (without cable socket) 6 Cable socket DIN EN 750-80, Form A, ex DIN 4650 99 Special version (8) Extra codes 000 None 46 Inverted signal 59 Choke in the pressure channel 64 Oil and grease free 60 Enlarged pressure channel b 876 Test report a The standard cable length is m. Further lengths up to a max. of 6 m are available upon request. b Diameter 8 mm with process connection 5 and 5, diameter mm with process connection 504 () () () (4) (5) (6) (7) (8) Order code / - - - - - /,... a Order example 400 / 000-460 - 4-504 - 0-6 / 59 a List extra codes in sequence, separated by commas. Minimum order volume: 5 pieces