SOLAR WATER PUMP KIT MODEL: SIG-CT5,5HP Introduction: SITECNO solar water pump system is complete solution for the supply of water with the power of solar energy. This system work in off grid mode and also hybrid with grid or diesel generator for water pumping in night or unstable weather conditions. Solar PV panels generate DC power when exposed in sun light, this DC power is supplied to MPPT inverter drive which convert this DC power in to regulated AC power and feed to the water pump motor. As a result water pump start pumping water according to its specification. SITECNO has special software to synchronise the PV power, inverter drive and water pump parameters for the smooth working of solar water pump system during the day time in the presence of sunlight. Solar water pump PV Inverter drive has additional advantage of soft starter. 5.5 HP Pump capacity 5.5 kw PV panels total power 4 inches Pump outer diameter Water head range Quantity of water range 6-26 meter 19.8-85.8 feet 20.000-78.000 liter / hour 88-343 gallon / minute Quantity Description 22 250 Wp Solar photovoltaic Si-polycrystalline panels 1 5,5 kw Water pump inverter 380-400V, 50Hz, Three Phase 1 unit Digital display screen for inverter (included) 1 unit DC connector for connection of PV Input (included) 1 5,5 kw Water pump motor submersible type 380-400V, 50Hz, Single Phase 1 5,5 HP Water pump submersible type (included) 22 unit Aluminum support structure for solar panels 74 meter DC cables 6mm R1000 PV panel to inverter 26 meter AC cable waterproof 2 core inverter to submersible pump motor 1 unit AC cable waterproof jointing kit 4 pair Solar connector MC4 50 meter Stainless steel wire for submersible water pump 2 unit Stainless steel wire joints 1 set SITECNO synchronization software for PV panels, inverters and pump motor 1 set Support structure installation tools 1 set Instructions manual for installation 1 set Electrical design layout SYSTEM WARRANTY: Solar modules production: Aluminium support structure: Inverters: Pump: Quality of Components: 25 years 10 years 2 years 2 years Manufactured in EU All components in the kit are high quality with CE standard
SOLAR WATER PUMP These systems are modular and flexible and can be installed as per your space and requirement. You can ask for additional services as state-of-the-art designing, drawings, engineering and installation of your projects. The solar water pump kits are designed by experts of SITECNO Group to meet the need of all kinds of water pumping. Application areas Designed for continuous as well as intermittent operation, the SITECNO solar system is especially suitable for water supply in remote locations such as: Villages, schools, hospitals, single-family houses, etc. Farms and ranches Watering of livestock Irrigation of crops and green houses Game parks and game farms Watering applications Conservation areas Surface water pumping Ponds and lakes Floating pump installations Sizing and selection made simple and easy: All you need to determine is the following three parameters: Geographical location Required maximum head Required water quantity per day 2
You get it all FREE reliable water supply COST FREE-efficient pumping Complete plug-and-play water pump system Wide voltage range AC and DC voltage handling easy installation Virtually no maintenance Numerous expansion possibilities Changover to grid or diesel generator Single line installation diagram Solar panels DG Set Inverter Water delivery pipe Grid Water pump 3
POLYCRYSTALLINE SOLAR PV MODULE SITECNO Solar Photovoltaic Panels stand for quality, durability and most importantly, high performance. Our experience, capacity of research, continuing development and improvement have turned us into a company recognized in the sector by the high value offered to our clients. Due to their engineered hollow section frame and its 4mm special textured glass with AR coating, SITECNO modules meet the maximum demands with regard to stability and corrosion resistance. Thanks to their high performance SITECNO modules are prepared for changes in legislation. These panels will produce 5% more than any other of the same features. The performance warranty is for 25 years, after 12 years, modules still produce a minimum 90% of their nominal performance. After 25 years module still produce a minimum 80% of their nominal performance. Electrical Characteristics: 990 MODEL SI-60P 250 Nominal Power (P max ) 250W Open Circuit Voltage (V oc ) 37,5V Short Circuit Current (I sc ) 8,76A Voltage at Nominal Power (V mp ) 30,3V Current at Nominal Power (I mp ) 8,24A Module Efficiency (%) 15,20 1660 Mechanical Characteristics: Cell type Number of cells Module dimension Weight Front cover Frame Junction box Cable length Connector Polycrystalline156x156mm 60 (6x10) 1660 x 990 x 50/40mm 20kg TSG low-iron tempered glass Aluminium alloy IP65, 3diodes 1200mm (+), 800mm(-) PV-JM601 950 Temperature Coefficients: 430 100 Nominal Operating Cell Temperature (NOCT) 25 C ±2 C Temperature Coefficients of Pmax -0.43% / K Temperature Coefficients of Voc -0.31% / K Temperature Coefficients of Isc 0.04% / K Operating Temperature -40 C to +85 C Maximum System Voltage 1000V DC Reverse current load 15A 430 800 800 (-) 1200 (+) 100 1460 4
Due to the unique combination of components, the high-efficiency modules from SITECNO are particularly powerful. With the high efficiency, the SITECNO offers maximum performance compared to the small overall area required. This also means: less effort and less material for installation. This increase in efficiency and the long-term high energy yields of SITECNO ensure efficient operation of your photovoltaic system. The quality of SITECNO module is continuously tested and confirmed by independent institutes. SITECNO modules are stored with a positive power classification. The performance is guaranteed by SITECNO for 25 years, the product guarantee is 10 years. SITECNO MODULE Polycrystalline SITECNO MODULE Monocrystalline SITECNO MODULE BIPV CERTIFIED SAFETY FOR PRODUCTIVE DECADE Damp-Heat Test IEC 61215 Result: The modules exceed the requirements by the factor of three in regard to environments with intense damp/heat. Thermal Cycling Test IEC 61215 Result: The modules exceed the requirements in regard to temperature fluctuation and three times extended performance time. Mechanical Load Test IEC 61215 Result: SITECNO PV-modules structural engineering sustains above-average loads. 25 Extensive quality management through production according to international quality and environmental standards as well as strict internal examinations. Consistently high cell quality through strict quality examinations by high-resolution electro-luminescence and infrared measurements. Strict quality examinations of the supplied components and each manufacturing step through optical and electronic test stations along the whole manufacturing line. 10 years product and 25 years performance guarantee Proper recycling and all sold modules through full membership in the PV Cycle association Intelligent and perfectly matched systems and services from the technical and economical plant layout up to the factory service Worldwide known and certified through VDE (IEC 61215 Ed.2, IEC 61730-1 Ed.1 and IEC 61730-2 Ed.1) 5
SOLAR WATER PUMP INVERTER Danfoss Solar Pump Inverter: The IP66 solution is innovative from both the hardware and the software control strategy point of view. A small enclosure where to place the mains switch and the surge protection device replaces the usual big cabinet, as the inverter is placed outside. The IP66 inverter can be installed outdoors without any reliability risk. It doesn t require maintenance, as there are no filters to clean/replace. Correct operation of the drive is visible from outside thanks to 4 LEDs showing the operating conditions: Power-ON, Run, Ready, Fault. An IP66 display panel can also be connected to get detailed information when needed, or kept permanently installed on the drive to show several variables (running speed, MWh counter, etc.)complementary products Solar panel connection mode: Stand-alone solution: inverter supplied by solar panels DC voltage. Completely independent from the mains supply and self sufficient installation. Solar panel or grid connection mode: With an external changeover switch, inverter can be supplied either by mains or solar panels. Useful during night or panel maintenance operations. The inverter can have a hot commutation from grid to PV and vice-versa, as they recognize the supply source (solar panels or grid) by a digital input, selecting the appropriate control software. PC software : Software application features: PID controller with automatic sleep and wake-up functions Supervisions and actual value measurement Multiple start mode Automatic and repeated starting attempt at sunrise Dry-run protection A dedicated application was developed to drive a solar pump with an optimized multiple algorithm MPPT (Maximum Power Point Tracking) supplied by solar panels. The unique controller MPPT4 controller implements 4 concurrent algorithms: Feed-Forward controller (to follow the radiation variations) Correction controller (to compensate the temperature variations) Oscillation Damping regulator (to catch-back the panels entering in the current source mode ) Local Maxima Bypass logic (to skip the false maximum point in case of partial irradiation) Technical overview: Dual mode supply connection: AC Mains: 380-480V (+/-10%), 47 66Hz Solar supply: up to 800 V DC AC Mains: 208-240V (+/-10%), 47 66Hz Solar supply: up to 400 V DC Enclosure rating: IP66/Type 4X enclosure: maintenance free Large capacitors bank for its category, so that sudden changes in solar power availability during operation are smoothed, avoiding annoying trips. Built-in MPPT4 : MPPT (Maximum power point tracker): a real 4-algorithms control scheme to obtain maximum power for any given environmental conditions EMC: Built-in EMC filter according to EN61800-3 Category C2 (for Mains supply) Communication: RS485 Mod-bus RTU connection and Ethernet Mod-bus TCP integrated as standard. 6
SOLAR WATER PUMP Applications For water supply, irrigation, civil, industrial and fire fighting applications. Features All pumps feature complete fabricated stainless steel AISI 304 construction. All pumps are equipped with water lubricated rubber wear rings and bush bearings to work well with sand, found in well water. These pumps offers higher pumping efficiency due to state-of-the-art computerized hydraulic design and usage of stainless steel sheet metal which offers a very low co-efficient of friction. This significantly reduces energy consumption. These pump can withstand harsh, abrasive and corrosive environment due to their construction in high grade AISI 304 stainless steel. All pumps are equipped with reliable non-return valve to prevent back flow and reduces water hammer when the pump is stopped. Material: Bore well pumps for 4 wells (DN 100 mm), 6 (DN 150 mm), 8 (DN 200mm) and 10 (DN 250 mm) are constructed completely out of stainless steel AISI 304. Sized for connection to the motor according to NEMA standards up to 8 motor joining. Delivery casing with built-in non-return valve. (AISI 316 material available on request). Impellers: Radial flow impellers: 4 & 6 Mixed flow impellers: 4, 6, 8 & 10 Connection: Screwed pipe connection with BSP thread as standard. (NPT thread pipe connection are available on request.) Operating conditions Liquid temperature 45 C Maximum sand content 50 g/m³ Water ph 6,5-8 Rated speed [rpm] 2900 Max. submerged depth 350 metres Motor Voltage 380 / 400 / 415 V, 3 Phase Enclosure class IP 68 Motor type Water filled submersible motor The conditions below apply to the curves: Tolerances in accordance with ISO 9906, Annex A. The motors used for the measurement are standard motors. Test results with clean cold water, without gas content. Measurements have been made with airless water at a temperature of 20 C. Head and power values valid for liquids with density ρ = 1,0 kg/dm³ and kinematic viscosity = max 1 m²/s (1 cst). The QH curves apply to a rated motor speed of 2900 min -1. The performance curves are inclusive of possible losses such as non-return valve losses. A safety margin of + 0,5 m is recommended for the NPSH value. Pst = Power with reference to one stage. 7
WATER PUMP MOTOR DATA Construction The water pumps submersible motors are designed using state-of-the-art computerized design techniques. All components are manufactured with superior quality material and are machined using precision CNC machine tools to ensure that motors are produced of excellent quality and reliability. They are built to provide maintenance-free, long life submersible pump operation. These are 2-pole induction motors, 50 Hz at Rated speed 2900 rpm and 60 Hz at Rated speed 3450 rpm. We offers a wide variety of submersible motors as per details below. Water filled stainless steel motor features: Easily rewindable (wet wound) induction motor with PE insulated windings. Completely stainless steel AISI 304 construction. Designed and sized for installation in 3, 4, 6, 8 & 10 diameter. Water lubricated radial and axial thrustbearings. Counter thrust bearing. Motors are pre-filled with clean water + Glycol mixture. Shaft extension made of stainless steel AISI 316. High efficiency electrical design (lower operating cost). Tropicalized design (lower winding temperature). Single phase motors are capacitor start and run design. All single phase motors will require control box. Pressure compensation diaphragm. Specification: Ratings: Supply voltages (Tolerance +6% / -10%): Degree of protection: IP 68 Continuous duty Ambient temperature: 45 C Rotation: Single phase - 0,37 to 4 kw Three phase - 0,37 to 200 kw 50 Hz, 1 phase, 220 V, 230 V 50 Hz, 3 phase, 380 V, 400 V, 415 V 60 Hz, 1 phase, 115 V, 230 V 60 Hz, 3 phase, 230 V, 380 V, 460 V Single phase - CCW Three phase - CCW and CW Maximum nos. of starts/hour: 0,37 to 2,2 kw - 20 3 to 5,5 kw - 10 Water ph: 6,5-8 Minimum cooling flow along the motor: 8 cm/sec Motor protection: Select thermal overload protection with trip time < 10 sec. at 5 x In Maximum submerged depth: 350 metres. Models 4 Water filled motor, 4 Water filled stainless steel motor, 4 Encapsulated motor, 6 Water filled motor 6 Water filled stainless steel motor, 6 Water filled heavy duty motor 6 Water filled heavy duty stainless steel motor, 8 Water filled heavy duty motor 10 Water filled heavy duty motor 8
Customer : Customer reference : Item number : Default Service : Quantity : 1 Operating Conditions Flow, rated : 57.29 m3/h Differential head / pressure, rated (requested) : 14.52 m Differential head / pressure, rated (actual) : 14.52 m Suction pressure, rated / max : 0.00 / 0.00 bar.g NPSH available, rated : Ample Frequency : 50 Hz Performance Speed, rated : 2900 rpm Impeller diameter, rated : 105 mm Impeller diameter, maximum : 105 mm Impeller diameter, minimum : 105 mm Efficiency : 79.32 % NPSH required / margin required : 4.84 / 0.00 m nq (imp. eye flow) / S (imp. eye flow) : 83 / 112 Metric units MCSF : - Head, maximum, rated diameter : 27.68 m Head rise to shutoff : 88.69 % Flow, best eff. point : 57.29 m3/h Flow ratio, rated / BEP : 100.00 % Diameter ratio (rated / max) : 100.00 % Head ratio (rated dia / max dia) : 100.00 % Cq/Ch/Ce/Cn [ANSI/HI 9.6.7-2010] : 1.00 / 1.00 / 1.00 / 1.00 Selection status : Acceptable Pump Performance Datasheet Quote number : Size Stages : 2 Based on curve number : W60-02-2-50 Date last saved Liquid Liquid type : Water Additional liquid description : Solids diameter, max : 0.00 mm Solids concentration, by volume : 0.00 % Temperature, max : 20.00 deg C Fluid density, rated / max : 0.999 / 0.999 kg/dm3 Viscosity, rated : 1.00 cst Vapor pressure, rated : 0.00 bar.a Material Material selected : Standard Pressure Data Maximum working pressure : 2.71 bar.g Maximum allowable working pressure : N/A Maximum allowable suction pressure : N/A Hydrostatic test pressure : N/A Driver & Power Data Driver sizing specification : Maximum power Margin over specification : 0.00 % Service factor : 1.00 Power, hydraulic : 2.26 kw Power, rated : 2.85 kw Power, maximum, rated diameter : 3.10 kw Minimum recommended motor rating : 3.73 kw / 5.00 hp 30 27 24 105 mm 51 59 21 67 73 Head - m 18 15 12 77 79 79 77 73 9 67 6 3 0 3.6 Power - kw 2.7 1.8 0.9 105 mm NPSHr - m 0.0 10 5 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 Flow - m3/h 9
ACCESSORIES Design and manufacture Type Technical feature Weight Loads Test certificate SITECNO Spain Modular type Aluminium 25 years warranty Tamper proof nut bolt 100% recyclable material A2 Stainless steel bolts 2,49kg/m wind, snow CE Certifies Support structure Cable: Manufacture Top Cable Spain Model: SI-MC4-F Rated Voltage: TUV 1500V DC / UL 600V DC Rating Current: 20-30A Cable Size: 2.5-4.0-6.0, 10-12-14AWG Proof Voltage: TUV 1500V AC, 1 min Protection Class: Class II Temperature Range: -40 to 85ºc Flame class: UL94-V0 Cable Connector: Flexible conductor, class 5 Maximum service temperature: 120ºC Estimated lifetime 30 years. Resistant UV Resistant Grease & mineral oils resistance: excellent Grease & mineral oils resistance: excellent Cable connector MC4 Wire rope: Material: Stainless steel Wire rope 10
5.5 HP SOLAR ENERGY WATER PUMP KITS Complete systems including all accessories with following options REF# MODEL# Option details: 24102 SIG-ET5.5HP -with General water pump and without aluminium support structure 24302 SIG-CT5.5HP -with Spanish water pump 25102 SIS-ET5.5HP -with Grundfos water pump and without aluminium support structure 25302 SIS-CT5.5HP -with Grundfos water pump PVP 9.678,99 12.907,24 12.051,19 15.279,44 Solar Energy Water Pump Kit Order Code Configuration: SI G - E S 5 HP - A Model: SI SITECNO Pump brand: G General S Grundfoss Panels Aluminium support structure: C kit with aluminium support structure E kit without aluminium support structure AC output phase: D DC S T single phase 220V three phase 400V Pump power (HP/KW): 0,25 to 50 Pump type: standard A advance more water For DC pump 0,6 to 2,5 and 3A to 11A 11
NON STOP FREE WATER WITH SOLAR ENERGY SITECNO S.A. C/ Can balmes 1, Zona industrial, Santa. Mª. de Palautordera, 08460 Barcelona, Spain. Tel: +34 938482544 Fax: +34 938480439 info@sitecnosolar.com www.sitecnosolar.com Authorised distributor: