Downlighting LyteCaster Project: Location: Cat.No: Type: Lamps: Notes: Qty: " square downlight 8 Lumens Philips Lightolier LyteCaster LED downlights feature a." luminaire height that conserves plenum space without compromising the 8 physical and reflected cutoff. The modular and interchangeable light engine allows for an easy future upgrade. The accent downlight is damp location listed and comes in standard finish options. Complete product = Frame-in kit + Light engine + Trim Order each separately Ordering guide: Frame-In kit Example: LAE L L LyteCaster " Frame type Dimming Input voltage A AirSeal IC, New Construction, Screw E ELV/Triac dimming V AN AirSeal IC, New Construction, Nail C Remodeler Non-IC N New Construction Non-IC Z -V U Universal (-V) Ordering guide: Light engine Example: L88NF L Lumens 8 CRI CCT Beam Option L LyteCaster " 8 8 8 8 K K K S Spot, NF Narrow flood, F Flood, 9 9 K K S Spot, NF Narrow flood, F Flood, CW CrispWhite Ordering guide: Square trim Example: LSDW Shape Luminaire type Finish Flange L S D L LyteCaster " S Square D Downlight D Diffuse cone blank White A Aluminum W White cone blank White. K and CrispWhite must be ordered together. LyteCaster_LS_Downlight Nov6 /6 page of
LSD LyteCaster " Square General purpose accent downlight, 8 lumens Ordering guide: Accessories L Type Beam Finish L LyteCaster." AH Accessory holder LS Linear lens spread film SD soft diffusion film W White B Black. Accessory holder required. RP Replacement Optic S Spot NF Narrow flood F Flood Assembled configuration:. Frame Galvanized steel construction with internal access door for inspection of junction box.. LED Module Extruded Aluminum clear anodized heat sink with thermal interface material efficiently transfers heat away from LED. Includes strain relieved low voltage whip with snap interconnector for quick, tool-less assembly of power connection.. Accessory Film (Optional) Available film accessories:. thick Linear spread film has notch to assist with beam orientation Holder required; only one film allowed per installation. Frame. Accessory Holder (Optional) painted steel. Accessory holder snaps onto LED Module. Can be installed before or after trim installation.. Mounting springs stainless steel mounting springs min. thick provide a universal mounting solution between the different frame offerings 6. Reflector: Aluminum Reflector Cone.. Die Cast Aluminum Trim Flange. Note: LED module allows for field replaceable optics. Order separately. LED Module Accessory film (optional) Mounting springs Accessory holder (optional) Flange Reflector LyteCaster_LS_Downlight Nov6 /6 page of
Flange Reflector LSD LyteCaster " Square 6 Cutoff General purpose accent downlight, 8 lumens LAE & LANE new construction in IC AirSeal frame-in /6" kits Bottom view /" (mm) /8" (mm) /" (mm) /6" -mm) " Min. (mm) " Max. (6mm) Tilt /8" (6mm) /" (mm) -/" (-mm) /" (mm) Square trim /8" /" (mm) (8mm) 8 Cutoff Light engine /" (mm) -mm) " (9mm) " (mm) Features. Housing: # ga. (.6") thick Galvanized steel. culus listed for direct contact with thermal insulation (IC rated). AirSeal housing minimizes air leakage to less than CFM at.psf (or PA), which complies with Title, the International Energy Conversation Code, and Washington State Energy Code (Section.). This helps to reduce heat loss and condensation in ceiling. Internal access door for inspection of junction box. 8 /" (mm) /8" (96mm) /6" (mm). Lower frame and top cover: # ga. (6") thick Galvanized steel. Accommodates ceilings up to " (. mm) thick. Bottom cover provided with a." (6.mm) lip and embossed indicator lines to simplify alignment during installation. Housing can be locked into position on the mounting bars with locking screws. /" (mm) LyteCaster_LS_Downlight Nov6 /6 page of. Junction box: ½" (6mm) x /8" (mm) x " (mm) # ga. (. ) thick galvanized steel, culus listed 9 degrees C rated supply conductors. Rated for branch circuit wiring supplying connected luminaires (daisy chaining). 9/". (66mm) Mounting bars: #6 ga. (.9") thick galvanized steel. Bars pivot for easy attachment and wire in from below the ceiling line. Bars can extend to accommodate 6" (6mm) to " (6mm) O.C. joist spacing. Bars can accommodate " (mm) O.C. joist spacing after slight field modification (see instruction sheet). Features integral self-tapping screw phillips/square drive for attachment to wood or metal construction. Also available with integral nails (N). Attaches to T-bar ceilings without accessories. Bars installed on shortest dimension of frame can be easily rotated 9 from original position. /6" /8" (8mm) /8" (mm) (mm) /" (mm). Electronic dimming driver: Class electronic LED Driver, with less than second start up, RoHS compliant, suitable for damp locations. v /6Hz >.9 power factor. Sound rating Class A (<db). Complies with FCC,CFR title part Class A for EMI/ RFI. Dimmable with standard electronic low voltage (ELV) & Triac dimmers. /8" Dims to (8mm) less than or equal to % of relative high output. year limited warranty. 6. Ceiling cutout: ¾" diameter. 6 Cutoff Electrical /8" Input /" (8mm) voltage v, Input freq.: (mm) /6 hz, Input current. amps, Input Power W, Power factor >.9 /6" Warranty year limited warranty. (visit philips.com/warranties for details) Labels culus type IC listed suitable for 6 Cutoff damp location. AirSeal. ceiling /" thickness (mm) This product complies with the requirements of the California /" Energy Commission regulated (mm) 8 /6" under Title, and has been listed Cutoff (mm) in the Title database. /6" (mm) /" Energy Star (mm) Product family has Energy Star certification with the following exceptions: All 9 CRI /6" options All CRI options Title Product family has Title certification with the following exception: All 8 /" CRI options (mm) 8 Cutoff
Flange Reflector LSD LyteCaster " Square General purpose accent downlight, 8 lumens 6 Cutoff LNZV New construction non IC -V frame-in kit Bottom view /" (mm) /8" (mm) /6" /" (mm) /6" -mm) " Min. (mm) " Max. (6mm) Tilt /8" (6mm) /" (mm) -/" (-mm) /" (mm) Square trim /8" /" (mm) (8mm) 8 Cutoff Light engine /" (mm) -mm) " (9mm) " (mm) Features 8 /" (mm). Non-IC housing: # ga. (.6") thick Galvanized steel. culus listed for damp locations. AirSeal housing minimizes air leakage to less than CFM at. PSF (or PA), complies with Title, International Energy Conversation Code, and Washington State Energy Code (section.) Frame provided with internal access door for inspection of junction box.. Lower frame and top cover: # ga. (6 ") thick Galvanized steel. Accommodates ceilings up to " (. mm) thick. Bottom cover provided with a." (6.mm) lip and embossed indicator lines to simplify alignment during installation. Housing can be locked into position on the mounting bars with locking screws. /8" (96mm) /6" (mm) /" (mm) LyteCaster_LS_Downlight Nov6 /6 page of. Junction box: ½" (6mm) x /8" (mm) x " (mm) # ga. (. ) thick galvanized steel, culus listed 9 degrees C rated supply conductors. Rated for branch circuit wiring supplying connected luminaires (daisy chaining).. Mounting bars: #6 ga. (.9") 9/" (66mm) thick galvanized steel. Bars pivot for easy attachment and wire in from below the ceiling line. Bars can extend to accommodate 6" (6mm) to " (6mm) O.C. joist spacing. Bars can accommodate " (mm) O.C. joist spacing after slight field modification. (see instruction sheet) Features integral self-tapping screw phillips/square drive screws for attachment to wood or metal construction. Attaches to T-bar ceilings without accessories. Bars installed on shortest dimension of frame can be easily rotated 9 from original position. /6" /8" (8mm) /8" (mm) (mm) /" (mm). Electronic dimming driver: Class electronic LED driver, RoHS compliant, suitable for damp location. /v /6Hz >.9 power factor. MTP (module thermal protection) current cutback up to % to prevent overheating. Sound rating /" Class (mm) A (<db). Complies with FCC, CFR title part Class A for EMI/ RFI. Dimming Protocol (-v). Dims to less than or equal to % of relative /8" high (8mm) output. 6. Ceiling cutout: ¾" diameter. 6 Electrical Cutoff Input voltage: /, input freq.:/6hz. /8" Input current /" (8mm) (mm).a/.6a Input Power 6.W, Power factor >.9 /6" Warranty year limited warranty. (visit philips.com/warranties for details) Labels culus listed suitable for damp 6 Cutoff location. AirSeal. ceiling /" thickness (mm) This product complies with the requirements of the California /" Energy Commission regulated (mm) under Title, and has been 8 /6" listed Cutoff (mm) in the Title database. For V only. /6" (mm) /" (mm) Energy Star Product family has Energy Star certification with the following exceptions: /6" All 9 CRI options Title Product family has Title certification with the following exception: All 8 CRI options /" (mm) 8 Cutoff
/" (mm) 8 /" (mm) LSD LyteCaster " Square /8" (96mm) /6" (mm) General purpose /8" (8mm) accent downlight, 8 lumens /" (mm) /8" /" (mm) (8mm) " (mm) /6" LCE Non-IC Remodeler kit 6 Cutoff Bottom ceiling view thickness Tilt /" (mm) -/" (-mm) 9/" (66mm) Square trim /" (mm) /" (mm) /6" /8" (mm) (mm) Mounting springs Light engine /8" (8mm) 8 Cutoff /6" Features. Non-IC housing: # ga. (") thick Galvanized steel. Provided with plates steel retaining springs that can accommodate ceiling thickness up to " (.mm) thick. Philips screw driver required to tighten springs that secure housing to ceiling.. Junction box: # ga. (.") thick Galvanized steel. culus, suitable for damp locations. Junction box assembly swivels for tight plenum spaces. Snap off cover permits wiring access.. Electronic dimming driver. Trim compatibility: Not (same as new construction): compatible with adjustable /8" Class electronic LED Driver, trims except for LRG /" (8mm) (mm) with less than second start series Gimbals. up, RoHS compliant, suitable. Ceiling cutout ¾" diameter. for damp locations. v /6Hz >.9 power factor. Sound rating Class A (<db). Complies with FCC,CFR title part Class B for EMI/ RFI. Dimmable with standard electronic low voltage (ELV) & Triac dimmers. Dims to less than or equal to % of relative high output. year limited warranty. /" (mm) /6" (mm) /6" (mm) /" (mm) Electrical 6 Cutoff Input voltage v, Input freq.: /6 hz, Input current. amps, Input Power W, Power factor >.9 Warranty year limited warranty. (visit philips.com/warranties " Min. (mm) for details) " Max. (6mm) Labels culus listed suitable for damp location, inherently /6" protected (IP rated). This product complies with the requirements of the California Energy Commission regulated under Title, and has been listed in the Title database. Energy Star 8 Product Cutoff family has Energy Star certification with the following exceptions: All 9 CRI options /" ( 8 /" (mm /8" (9 /6" ( Title Product family has Title certification with the following exception: All 8 CRI options /" ( /" (mm) /8" (8mm) 9/ LyteCaster_LS_Downlight Nov6 /6 page of 6 Cutoff
LSD LyteCaster " Square General purpose accent downlight, 8 lumens Adjustment factors Color temperature (CCT) K = 88% K = 96% K = % Color Rendering Index (CRI) 8 = % 9 = 8% 9 (CW) Crisp White = 8% Finish White Baffle (BW) = % White Cone (DW) = % Diffuse (DD) = % Chrome (DC) = % Beam spread: Spot Candela Curves Angle Mean CP Lumens 6 6 8 8 9 996 8 6 88 6 6 Frame: LNZU Light engine: L88S Trim: LSDDA Output lumens: lm Input Watts :.8 W Beam angle: Spacing Criterion:. Single unit data Height to Lighted Plane ' 6' ' 8' 9' Initial Center Beam Foot-Candles 9 8 6 Efficacy: CCT : CRI: Beam Dia. (ft)* * Beam diameter is where foot-candles drop to % of m..'.8'.'.'.' Report no : GFR 6. lm/w K 8 Zonal lumens & percentages Zone Lumens %Luminaire - - -6-9 68 8 9 9.% 9.6% 99.%.% Beam spread: Narrow flood Candela Curves Angle Mean CP Lumens 6 6 8 8 9 6 8 9 9 6 6 6 Frame: LNZU Light engine: L88NF Trim: LSDDA Output lumens: lm Input Watts :.8 W Beam angle: Spacing Criterion:. Single unit data Height to Lighted Plane ' 6' ' 8' 9' Initial Center Beam Foot-Candles Efficacy: CCT : CRI: Beam Dia. (ft)* * Beam diameter is where foot-candles drop to % of m..'.'.8'.'.6' Report no : 9GFR 6. lm/w K 8 Zonal lumens & percentages Zone Lumens %Luminaire - - -6-9 69 8 6 9.% 96.9% 99.%.%. Wattage: controlled to within ± %. Correlated Color Temperature: within specs as defined in ANSI_NEMA_ANSLG C8.-8: Specifications for the Chromaticity of Solid State Lighting Products.. Tested using absolute photometry as specified in LM9: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. LyteCaster_LS_Downlight Nov6 /6 page 6 of
LSD LyteCaster " Square General purpose accent downlight, 8 lumens Beam spread: Flood Candela Curves Angle Mean CP Lumens 6 6 8 8 9 9 96 6 6 69 8 8 6 8 68 6 Frame: LNZU Light engine: L88F Trim: LSDDA Output lumens: lm Input Watts :.8 W Beam angle: Spacing Criterion:. Single unit data Height to Lighted Plane ' 6' ' 8' 9' Initial Center Beam Foot-Candles 8 8 6 Efficacy: CCT : CRI: Beam Dia. (ft)* * Beam diameter is where foot-candles drop to % of m..'.'.'.'.' Report no : GFR 6. lm/w K 8 Zonal lumens & percentages Zone Lumens %Luminaire - - -6-9 69 699 9.% 96.% 99.%.%. Wattage: controlled to within ± %. Correlated Color Temperature: within specs as defined in ANSI_NEMA_ANSLG C8.-8: Specifications for the Chromaticity of Solid State Lighting Products.. Tested using absolute photometry as specified in LM9: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. Electrical Specifications Frame-in kit Input volts Input freq. Input current LED drive current Input power LED power THD factor Power factor LAE V /6Hz.9 A 6 ma.6 W 8.6 W <% >.9 LANE V /6Hz.9 A 6 ma.6 W 8.6 W <% >.9 LCE V /6Hz.9 A 6 ma.6 W 8.6 W <% >.9 LNZU V /6Hz. A 6 ma.8 W 9. W <% >.8 V /6Hz. A 6 ma.8 W 8.9 W <% >.8 6 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. philips.com/luminaires LyteCaster_LS_Downlight Nov6 /6 page of Philips Lighting North America Corporation Franklin Square Drive, Somerset, NJ 88 Tel. 8-86-6 Philips Lighting Canada Ltd. 8 Hillmount Rd, Markham, ON, Canada L6C S Tel. 8-668-98