FIRE PROTECTION EQUIPMENT 2017 DATA SHEETS BSP FIRE RESERVES THE RIGHT TO ALTER INFORMATION CONTAINED IN THIS CATALOGUE AT ANY TIME.
DATA SHEET INDEX 36m x 19mm FIRE HOSE REEL RISER INSTALLATION DETAIL (BOOSTER & FEED HYD.) 100mm DUAL BOOSTER & FEED HYDRANT ASSEMBLIES 150mm DUAL BOOSTER & FEED HYDRANT ASSEMBLIES 150mm QUAD BOOSTER & FEED HYDRANT ASSEMBLIES SINGLE DETECTOR CHECK VALVE ASSEMBLIES BOOSTER RISERS HYDRANT RISERS & HEADS CABINETS: METAL HOSE REEL STAND HYDRANT LOCKOUT DEVICE c/w 003 LOCK ROLL GROOVE FITTINGS BUTTERFLY VALVES FIRE EXTINGUISHERS STORZ SUCTION ADAPTORS MAIN INDEX
DATA SHEET RISER INSTALLATION DETAIL 100mm RISER INSTALLATION : (SUBJECT TO VARIATION) 150mm RISER INSTALLATION : (SUBJECT TO VARIATION)
DATA SHEET 100mm BOOSTER & FEED HYDRANT ASSEMBLIES: DUAL BOOSTER & FEED HYDRANT (BACKFLOW DEVICE UPSTREAM) METER BYPASS: ROLL GROOVE CHECK VALVE METER ATTACHED: ROLL GROOVE CHECK VALVE METER BYPASS: FLANGED CHECK VALVE METER ATTACHED: FLANGED CHECK VALVE
DATA SHEET SINGLE DETECTOR CHECK VALVE ASSEMBLIES 100mm METER BYPASS. ROLL GROOVE 100mm METER BYPASS. FLANGED 100mm METER ATTACHED. ROLL GROOVE 100mm METER ATTACHED. FLANGED 150mm METER BYPASS. ROLL GROOVE 150mm METER BYPASS. FLANGED 150mm METER ATTACHED. ROLL GROOVE 150mm METER ATTACHED. FLANGED DATA SHEET INDEX
DATA SHEET BOOSTER & RISER 100mm DUAL BOOSTER & RISER 100mm DUAL BOOSTER & RISER c/w BUTTERFLY VALVE 150mm DUAL BOOSTER & RISER 150mm DUAL BOOSTER & RISER c/w BUTTERFLY VALVE 150mm QUAD BOOSTER & RISER 150mm QUAD BOOSTER & RISER c/w BUTTERFLY VALVE
DATA SHEET 150mm QUAD BOOSTER & FEED HYDRANT ASSEMBLIES: QUAD BOOSTER & FEED HYDRANT (BACKFLOW DEVICE UPSTREAM) METER BYPASS: ROLL GROOVE CHECK METER ATTACHED: ROLL GROOVE CHECK VALVE METER BYPASS: FLANGED CHECK VALVE METER ATTACHED: FLANGED CHECK VALVE
DATA SHEET 150mm DUAL BOOSTER & FEED HYDRANT ASSEMBLIES: 150mm DUAL BOOSTER & FEED HYDRANT (BACKFLOW DEVICE UPSTREAM) METER BYPASS: ROLL GROOVE CHECK METER ATTACHED: ROLL GROOVE CHECK VALVE METER BYPASS: FLANGED CHECK METER ATTACHED: FLANGED CHECK VALVE
DATA SHEET HYDRANT RISERS 80mm SINGLE: ROLL GROOVE 100mm SINGLE: ROLL GROOVE 100mm DUAL: ROLL GROOVE 100mm DUAL: FLANGED 150mm QUAD: ROLL GROOVE 100mm DUAL HYDRANT HEAD
DATA SHEET CABINETS BOOSTER & FEED HYDRANT BOOSTER & RISER HOSE REEL HYDRANT & HOSE REEL HYDRANT
DATA SHEET CABINET: HOSE REEL WALL MOUNT: SINGLE DOOR WALL MOUNT: DOUBLE DOOR FLOOR MOUNT: FLOOR MOUNT: c/w 50mm LEGS
DATA SHEET CABINET: BOOSTER & FEED HYDRANT 100mm DUAL BOOSTER & FEED HYDRANT CABINET 150mm QUAD BOOSTER & FEED HYDRANT CABINET DATA SHEET INDEX
DATA SHEET CABINET: HYDRANT & HOSE REEL FLOOR MOUNT FLOOR MOUNT: c/w 50mm LEGS DATA SHEET INDEX
DATA SHEET CABINET: HYDRANT DUAL HYDRANT: ON LEGS DUAL HYDRANT: WALL MOUNT SINGLE HYDRANT: ON LEGS DATA SHEET INDEX
DATA SHEET ROLL GROOVE FITTINGS: GAL. COUPLING COUPLING: FIRELOCK EZ Style 009H ELBOW TEE: EQUAL BLANK CAP
DATA SHEET BUTTERFLY VALVES: GEAR OPERATED: ROLL GROOVE: WATERMARK LEVEL 1 & UL / FM APPROVAL VALVE SPECIFICATIONS BUTTERFLY VALVES: GEAR OPERATED: ROLL GROOVE: UL / FM APPROVAL VALVE SPECIFICATIONS SWITCH & WIRING
DATA SHEET FIRE EXTINGUISHERS c/w SIGNS (FLAMEGUARD) FIRE EXTINGUISHERS A:B(E) FIRE EXTINGUISHERS B(E)
BSP FIRE 14 Park Dve, Dandenong South, 3175 Red Emperor Fixed Fire Hose Reel Specification Data Sheet Technical Information -- Nominal hose diameter 19mm. -- Hose Length 36 meters. -- Minumum discharge rate 0.45 L/S at 220 +/- 10kPa -- Maximum inlet pressure 1000 kpa -- Manufactured in accordance to Australian Standard AS/NZS1221 -- Fire hose reel should be maintained in accordance with AS1851 and serviced every 6 months -- Twist Action brass nozzle -- Steel "Signal Red" side plates -- Mild steel galvanized support assembly -- DR Brass with mild handle ball valve assembly -- Mild Steel galvanised mounting bracket To Specify The AS/NZS 1221 Fire Hose Reel is designed for fire fighting purposes only and is supplied standard with mounting bracket, brass nozzle, ball valve and powder coated side plates. Code: 383026RE - Red Emperor Fixed Fire Hose Reel with swing guide arm 36meter (East Coast) Features -- Adjustable brass nozzle -- Easy to operate and maintain -- 12 month warranty from date of delivery (warranty covers cost of hose reel only) Environment ISO 14001 Quality ISO 9001
FireLock Rigid Coupling STYLE 005 WITH VIC-PLUS GASKET SYSTEM (NORTH AMERICA ONLY) FireLock Style 005 rigid coupling has a unique, patented angle-pad design which allows the housings to offset while clamping the grooves. By permitting the housings to slide on the angled bolt pads, rigidity is obtained. Support and hanging requirements correspond to NFPA 13 Sprinkler Systems. Angle-pad design permits assembly by removing one nut/bolt and swinging the housing over the gasket. This reduces components to handle during assembly. Style 005 FireLock coupling are designed and recommended for use ONLY on fire protection systems. Vic-Plus Gasket System: In North America, Victaulic offers a gasket system which requires no field lubrication on wet pipe systems that are hydrostatically tested. The Vic-Plus System (patented) is dry, clean, and non-toxic. It reduces assembly time substantially and eliminates the mess and chance of overlubrication. Please refer to the latest copy of the Victaulic Field Installation Handbook (I-100) for supplemental lubrication requirements and dry pipe fire protection system notes. SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS LPC and VdS Approved, see notes on page 4 PATENTED Exaggerated for clarity LISTING/APPROVALS The information provided below is based on the latest listing and approval data at the time of publication. Listings/Approvals are subject to change and/or additions by the approvals agencies. Contact Victaulic for performance on other pipe and the latest listings and approvals. Related Working Pressure psi Related Working Pressure psi Related Working Pressure psi Pipe Sch. Size Inches UL ULC FM Pipe Sch. Size Inches UL ULC FM Pipe Sch. Size Inches UL ULC FM 5 1 ¼ 3 175 175 175 EL 1 ¼ 2 300 N/A N/A MT 1 ¼ 2 300 N/A N/A 1 ¼ 4 350 350 350 ET 1 ¼ 2 300 N/A N/A STF 1 ¼ 4 N/A N/A 300 10, 40 Steady 5 8 300 300 300 EZ 4 6 300# N/A 300 Thd. 1 ¼ 2 N/A N/A 300 BLT 1 ¼ 2 300 300 N/A FF 1 ¼ 4 N/A N/A 300 TF 3 8 N/A N/A 300 DF 1 ¼ 4 300 300 300 GAL - 7 1 ¼ 2 300 N/A N/A WLS 1 ¼ 2 300 300 N/A DT 1 ¼ 2 300 300 N/A MLT 1 ¼ 2 300 N/A N/A XL 1 ¼ 3 300 300 300 EF 1 1 4 175@ N/A 175 MF 1 ¼ 4 300 N/A 300* * FM approved for service in 1 ½ 4" pipe. # UL Listed for service up to 4" pipe only. @ UL Listed for service up to 3" only.
C to E C to E C to E C to E C to E T NO. 001 NO. 003 NO. 002 NO. 006 Nominal Size Inches mm Size Actual Outside Diameter Inches mm C to E Inches mm No. 001 90 Elbow Approx. Weight Each Lbs. kg C to E Inches mm No. 003 45 Elbow Approx. Weight Each Lbs. kg C to E Inches mm No. 002 Straight Tee Approx. Weight Each Lbs. kg Thickness T Inches mm No. 006 Cap Approx. Weight Each Lbs. kg 1 1/4 1.660 0.8 0.3 32 42.4 21 0.1 1 1/2 1.900 0.82 0.4 40 48.3 21 0.2 2 2.375 2.75 1.7 2.00 1.8 2.75 2.4 0.88 0.6 50 60.3 70 0.8 51 0.8 70 1.1 22 0.3 2 1/2 2.875 3.00 3.1 2.25 2.2 3.00 3.6 0.88 1.0 65 73.0 76 1.4 57 1.0 76 1.6 22 0.5 76.1 mm 3.000 3.00 3.30 2.25 2.4 76.1 76 1.5 57 1.1 3 3.500 3.38 4.0 2.50 3.1 3.38 5.3 0.88 1.2 80 88.9 86 1.8 64 1.4 86 2.4 22 0.5 108 mm 4.250 4.00 5.7 3.00 5.1 4.00 7.5 108.0 102 2.6 76 2.3 102 3.4 4 4.500 4.00 6.7 3.00 5.6 4.00 8.7 1.00 2.4 100 114.3 102 3.0 76 2.5 102 3.9 25 1.1 5 5.563 4.88 12.6 3.25 8.3 4.88 15.7 1.00 4.1 125 141.3 124 5.7 83 3.8 124 7.1 25 1.9 159 mm 6.250 5.50 12.6 3.50 9.2 3.50 17.9 158.8 140 5.7 89 4.2 140 8.0 6 6.625 5.50 18.3 3.50 11.7 5.50 22.7 1.00 5.9 150 168.3 140 8.3 89 5.3 140 10.3 25 2.7 8 8.625 6.81 25.5 4.25 20.4 6.94 38.7 1.13 12.7 200 219.1 173 11.6 108 9.3 176 17.6 29 5.8
C to E C to E C to E C to E C to E T NO. 001 NO. 003 NO. 002 NO. 006 Nominal Size Inches mm Size Actual Outside Diameter Inches mm C to E Inches mm No. 001 90 Elbow Approx. Weight Each Lbs. kg C to E Inches mm No. 003 45 Elbow Approx. Weight Each Lbs. kg C to E Inches mm No. 002 Straight Tee Approx. Weight Each Lbs. kg Thickness T Inches mm No. 006 Cap Approx. Weight Each Lbs. kg 1 1/4 1.660 0.8 0.3 32 42.4 21 0.1 1 1/2 1.900 0.82 0.4 40 48.3 21 0.2 2 2.375 2.75 1.7 2.00 1.8 2.75 2.4 0.88 0.6 50 60.3 70 0.8 51 0.8 70 1.1 22 0.3 2 1/2 2.875 3.00 3.1 2.25 2.2 3.00 3.6 0.88 1.0 65 73.0 76 1.4 57 1.0 76 1.6 22 0.5 76.1 mm 3.000 3.00 3.30 2.25 2.4 76.1 76 1.5 57 1.1 3 3.500 3.38 4.0 2.50 3.1 3.38 5.3 0.88 1.2 80 88.9 86 1.8 64 1.4 86 2.4 22 0.5 108 mm 4.250 4.00 5.7 3.00 5.1 4.00 7.5 108.0 102 2.6 76 2.3 102 3.4 4 4.500 4.00 6.7 3.00 5.6 4.00 8.7 1.00 2.4 100 114.3 102 3.0 76 2.5 102 3.9 25 1.1 5 5.563 4.88 12.6 3.25 8.3 4.88 15.7 1.00 4.1 125 141.3 124 5.7 83 3.8 124 7.1 25 1.9 159 mm 6.250 5.50 12.6 3.50 9.2 3.50 17.9 158.8 140 5.7 89 4.2 140 8.0 6 6.625 5.50 18.3 3.50 11.7 5.50 22.7 1.00 5.9 150 168.3 140 8.3 89 5.3 140 10.3 25 2.7 8 8.625 6.81 25.5 4.25 20.4 6.94 38.7 1.13 12.7 200 219.1 173 11.6 108 9.3 176 17.6 29 5.8
C to E C to E C to E C to E C to E T NO. 001 NO. 003 NO. 002 NO. 006 Nominal Size Inches mm Size Actual Outside Diameter Inches mm C to E Inches mm No. 001 90 Elbow Approx. Weight Each Lbs. kg C to E Inches mm No. 003 45 Elbow Approx. Weight Each Lbs. kg C to E Inches mm No. 002 Straight Tee Approx. Weight Each Lbs. kg Thickness T Inches mm No. 006 Cap Approx. Weight Each Lbs. kg 1 1/4 1.660 0.8 0.3 32 42.4 21 0.1 1 1/2 1.900 0.82 0.4 40 48.3 21 0.2 2 2.375 2.75 1.7 2.00 1.8 2.75 2.4 0.88 0.6 50 60.3 70 0.8 51 0.8 70 1.1 22 0.3 2 1/2 2.875 3.00 3.1 2.25 2.2 3.00 3.6 0.88 1.0 65 73.0 76 1.4 57 1.0 76 1.6 22 0.5 76.1 mm 3.000 3.00 3.30 2.25 2.4 76.1 76 1.5 57 1.1 3 3.500 3.38 4.0 2.50 3.1 3.38 5.3 0.88 1.2 80 88.9 86 1.8 64 1.4 86 2.4 22 0.5 108 mm 4.250 4.00 5.7 3.00 5.1 4.00 7.5 108.0 102 2.6 76 2.3 102 3.4 4 4.500 4.00 6.7 3.00 5.6 4.00 8.7 1.00 2.4 100 114.3 102 3.0 76 2.5 102 3.9 25 1.1 5 5.563 4.88 12.6 3.25 8.3 4.88 15.7 1.00 4.1 125 141.3 124 5.7 83 3.8 124 7.1 25 1.9 159 mm 6.250 5.50 12.6 3.50 9.2 3.50 17.9 158.8 140 5.7 89 4.2 140 8.0 6 6.625 5.50 18.3 3.50 11.7 5.50 22.7 1.00 5.9 150 168.3 140 8.3 89 5.3 140 10.3 25 2.7 8 8.625 6.81 25.5 4.25 20.4 6.94 38.7 1.13 12.7 200 219.1 173 11.6 108 9.3 176 17.6 29 5.8
1013/17 9.0LT flameguard r water 3a 650 280 180 1014/17 9.0LT flameguard r foam 3a:20b 650 280 180 Features Powder Coated Stainless Steel Cylinder on Water & Foam Models Powder Coated Mild Steel Cylinder on Dry Chemical Models Powder Coated Aluminium Cylinder on CO 2 Models Forged Brass Valves on all Models Powder Coated Handles & Triggers on all Models Flameguard R Fire Extinguisher Specifications Part Number Description Rating Height (mm) Width (mm) Cylinder Diameter 3007/17 2.0kg flameguard r carbon dioxide 2b:e 550 300 111 3008/17 3.5kg flameguard r carbon dioxide 5b:e 580 260 140 3009/17 5.0kg flameguard r carbon dioxide 10b:e 650 260 152 2040/17 1.0kg flameguard r abe dry chemical 1a:10b:e 340 120 80 2062/17 1.5KG FLAMEGUARD R ABE DRY CHEMICAL 2A:30B:E 365 120 90 2055/17 2.3kg flameguard r abe dry chemical 2A:40B:E 440 170 105 2056/17 2.5kg flameguard r abe dry chemical 3a:40b:e 380 200 130 2058/17 4.5kg flameguard r abe dry chemical 4a:60b:e 500 250 140 2060/17 9.0kg flameguard r abe dry chemical 6a:80b:e 650 300 182
Features Powder Coated Stainless Steel Cylinder on Water & Foam Models Powder Coated Mild Steel Cylinder on Dry Chemical Models Powder Coated Aluminium Cylinder on CO 2 Models Forged Brass Valves on all Models Powder Coated Handles & Triggers on all Models Flameguard R Fire Extinguisher Specifications Part Number Description Rating Height (mm) Width (mm) Cylinder Diameter 3007/17 2.0kg flameguard r carbon dioxide 2b:e 550 300 111 3008/17 3.5kg flameguard r carbon dioxide 5b:e 580 260 140 3009/17 5.0kg flameguard r carbon dioxide 10b:e 650 260 152
FireLock Butterfly Valve SERIES 705W WITH WEATHERPROOF ACTUATOR DIMENSIONS 0026 Nominal Size inches mm Size Actual Outside Diameter inches mm End to End A Dimensions inches/millimeters Aprx. Wgt. Each Hgt. B E F J O N P lbs/kg 4.21 6.08 4.92 0.00 * 0.75 8.3 2 ½ 2.875 3.77 8.76 65 73.0 95.6 222.5 106.9 154.4 125 0.0 * 19.1 3.8 76.1 mm 3.000 3.77 8.76 4.21 6.08 4.92 0.00 * 0.75 8.3 76.1 95.6 222.5 106.9 154.4 125 0.0 * 19.1 3.8 3 3.500 3.77 9.40 0.08 4.21 6.08 4.92 0.00 * 0.75 8.9 80 88.9 95.6 238.8 2.0 106.9 154.4 125 0.0 * 19.1 4.0 4 4.500 4.63 10.84 0.07 6.01 6.98 4.92 0.73 1.13 14.9 100 114.3 117.6 275.3 1.8 152.7 177.3 125 18.5 28.7 6.8 139.7 mm 5.500 5.88 12.38 0.43 6.01 8.57 7.87 21.0 139.7 149.4 314.5 10.9 152.7 217.7 200 9.5 5 5.563 5.88 12.38 0.43 6.01 8.57 7.87 21.0 125 141.3 149.4 314.5 10.9 152.7 217.7 200 9.5 165.1 mm 6.500 5.88 13.41 1.00 7.51 9.32 7.87 1.60 1.88 26.5 165.1 149.4 340.6 25.4 190.8 236.7 200 40.6 47.8 12.0 6 6.625 5.88 13.41 1.00 7.51 9.32 7.87 1.60 1.88 26.5 150 168.3 149.4 340.6 25.4 190.8 236.7 200 40.6 47.8 12.0 8 8.625 5.33 16.50 1.27 9.65 10.98 9.84 0.00 * 0.68 43.0 200 219.1 135.4 419.1 32.3 245.1 278.9 250 0.0 * 17.3 19.5 10 10.750 6.40 19.14 1.72 12.20 16.19 9.84 80.0 250 273.0 162.6 486.2 43.7 309.9 411.2 250 36.3 12 12.750 6.50 21.54 2.66 14.25 17.22 9.84 102.0 300 323.9 165.1 547.1 67.6 362.0 437.4 250 46.3 * On Centerline These dimensions apply only to a Series 705W Butterfly Valve with a ½-inch NPT, supply-side tap 1. To prevent rotation of valves. it is recommended that Series 705W be installed with Victaulic Style 07 Zero-Flex. Style 005 FireLock, Style 009/009V FireLock EZ, or Style HP-70 Rigid Couplings. If Victaulic flexible couplings are used. additional support may be required. 2. Valve must not be installed with disc in full open position. Disc must be partly closed so that no part is protruding beyond end of valve body. 3. Victaulic grooved end butterfly valves are permitted for use with grooved end pipe (IPS) only. Not permitted for use with plain end (IPS) pipe. 4. Series 705W valves are designed for ambient weather conditions as opposed to submersible service. O O B ½" NPT Supply Tap B ½" NPT Supply Tap N N F J A E P F J A E P 2½ 4-INCH/65 100-MM SIZES 5 12-INCH/125 300-MM SIZES
FireLock Butterfly Valve SERIES 705W WITH WEATHERPROOF ACTUATOR SWITCH AND WIRING 1. The supervisory switch contains two, single pole, double throw, pre-wired switches. 2. Switches are rated: 10 amps @ 125 or 250 VAC/60 Hz 0.50 amps @ 125 VDC 0.25 amps @ 250 VDC 3. Switches supervise the valve in the open position. 4. One switch has two #18 MTW wires per terminal, which permit complete supervision of leads (refer to diagrams and notes below). The second switch has one #18 MTW wire per terminal. This double circuit provides flexibility to operate two electrical devices at separate locations, such as an indicating light and an audible alarm, in the area that the valve is installed. 5. A #14 MTW ground lead (green) is provided. Switch #1 = S1 For connection to the supervisory circuit of a UL Listed alarm control panel Switch #2 = S2 Auxiliary switch that may be connected to auxiliary devices, per the authority having jurisdiction { Normally Closed: (2) Blue S1 Common: (2) Yellow S2 {Normally Closed: Blue with Orange Stripe Normally Open: Brown with Orange Stripe Common: Yellow with Orange Stripe CONDUIT UL LISTED JUNCTION BOX FIRE ALARM CONTROL PANEL SUPERVISORY CIRCUIT TO END-OF-LINE RESISTOR, OR NEXT INDICATOR N.C. NO. COM. ½" NPT CONDUIT CONNECTORS WIRE NUTS SWITCH CONTACT RATING: 10A AT 125 AND 250VAC, 0.5A AT 125 VDC, 0.25 AT 250 VDC VOLTAGE SOURCE S1 S2 BELL OR HORN Switch 1: 2 leads per terminal Switch 2: 1 lead per terminal NOTE: The above diagram shows a connection between the common terminal (yellow S1 and yellow-with-orange stripe S2) and the normally closed terminal (blue S1 and blue-with-orange stripe S2). In this example, the indicator light and alarm will stay on until the valve is fully open. When the valve is fully open, the indicator light and alarm will go out. Cap off any unused wires (e.g. brown with orange stripe). Only S1 (two leads per terminal) may be connected to the fire alarm control panel. The connection of the alarm switch wiring shall be in accordance with NFPA 72 and the auxiliary switch per NFPA 70 (NEC).