ASD Garage Canopy Luminaire with junction box provides a slim, low profile solution for easy mounting. Built with rugged cast aluminum, this luminaire is available with surface or pendant mount. J-Box is designed for through wiring and wet location installations. Pendant mount luminaire is supplied with a 3/4" (19mm) NPT stainless steel pendant connection. Lightweight construction and universal mounting make installations near effortless. Motion sensor option is available. FEATURES AND BENEFITS: Junction box on top for easy wiring Dimmable, motion sensor option available High efficacy 13 lm/w and up SMD chips for brighter light Easy mounting Operating temperature of -4 to 113 Wet location IP65 L-7 Life > 15, hrs culus certified DesignLights Consortium (DLC) listed (Classification: Premium) 5 Year warranty EASY WIRING & EFFORTLESS INSTALLATION OPEN FOR WIRING ORDERING MATRIX: Family Modification Watts Dimmable CCT Finish Motion Sensor Series ASD-CAN 4 XX D 4 X MS PRM LED Canopy with j-box 4 = 4 W Dimmable 4, K W = White Motion Sensor Premium 55 = 55 W 5, K B = Bronze 75 = 75 W LED CANOPY WITH J-BOX: Model Watts Dimming Compatible CCT Lumens Dimensions (LxWxH) ASD-CAN4-4D4W-PRM 4 W YES 4, K 5,369 lm 8 15/16" x 8 15/16" x 4 1/2" ASD-CAN4-4D4B-PRM 4 W YES 4, K 5,369 lm 8 15/16" x 8 15/16" x 4 1/2" ASD-CAN4-55D4W-PRM 55 W YES 4, K 7,35 lm 8 15/16" x 8 15/16" x 4 1/2" ASD-CAN4-55D4B-PRM 55 W YES 4, K 7,35 lm 8 15/16" x 8 15/16" x 4 1/2" ASD-CAN4-55D4B-MS-PRM 55 W YES 4, K 7,35 lm 8 15/16" x 8 15/16" x 4 1/2" ASD-CAN4-55D4W-MS-PRM 55 W YES 4, K 7,35 lm 8 15/16" x 8 15/16" x 4 1/2" ASD-CAN4-75D5B-PRM 75 W YES 5, K 9,962 lm 1" x 1" x 4 15/16"
PRODUCT SPECIFICATIONS: Construction & Materials Lens PC Reflector Aluminum Housing Aluminum Finish White, Bronze Weight ASD-CAN4-4D4W-PRM ASD-CAN4-55D4W-PRM ASD-CAN4-55D4B-MS-PRM ASD-CAN4-75D5B-PRM ASD-CAN4-4D4B-PRM ASD-CAN4-55D4B-PRM ASD-CAN4-55D4W-MS-PRM 4.18 lbs (1.9 kg) 4.4 lbs (2 kg) 4.62 lbs (2.1 kg) 6.6 lbs (3. kg) Environmental System Work Environment Suitable for Wet Locations, IP65 Operating Temperature -4 to 113 (-2 to 45 ) L-7 Life > 15, hrs Optical System Luminous Flux ASD-CAN4-4D4W-PRM ASD-CAN4-55D4W-PRM ASD-CAN4-55D4B-MS-PRM ASD-CAN4-75D5B-PRM ASD-CAN4-4D4B-PRM ASD-CAN4-55D4B-PRM ASD-CAN4-55D4W-MS-PRM 5,369 lm 7,35 lm 7,35 lm 9,962 lm Color Temperature 4, K; 5, K CRI >8 Electrical System Input Voltage 1~277V AC 5/6 Hz Max input current ASD-CAN4-4D4W-PRM ASD-CAN4-55D4W-PRM ASD-CAN4-55D4B-MS-PRM ASD-CAN4-75D5B-PRM ASD-CAN4-4D4B-PRM ASD-CAN4-55D4B-PRM ASD-CAN4-55D4W-MS-PRM.45 A.6 A.6 A.8 A Inrush current 5 A Action time (Inrush current).2 ms AC input range min 1 V max 277 V Off State Power W Power Consumption ASD-CAN4-4D4W-PRM ASD-CAN4-55D4W-PRM ASD-CAN4-55D4B-MS-PRM ASD-CAN4-75D5B-PRM ASD-CAN4-4D4B-PRM ASD-CAN4-55D4B-PRM ASD-CAN4-55D4W-MS-PRM 4 W 55 W 55 W 75 W Power Factor.9 Output voltage 36-54 V Max output current ASD-CAN4-4D4W-PRM ASD-CAN4-55D4W-PRM ASD-CAN4-55D4B-MS-PRM ASD-CAN4-75D5B-PRM ASD-CAN4-4D4B-PRM ASD-CAN4-55D4B-PRM ASD-CAN4-55D4W-MS-PRM 79 ma 1,8 ma 1,8 ma 1,52 ma LED driver class Class 2 Warranty & Certifications 5-year limited warranty DesignLights Consortium (DLC) listed (Classification: Premium) culus certified E47384 The LED Canopy with j-box is designed to install as a surface mounted luminaires.
4 W, 55 W 75 W 8 15/16 (227 mm) 1 (255 mm) 4 1/2 (115 mm) 8 15/16 (227 mm) 4 15/16 (125 mm) 1 (255 mm) 4 W 75 W LIGHT DISTRIBUTION CURVE UNIT:CD C PLANE ISOLUX DIAGRAM (UNIT:lx) MH(m) 1 LIGHT DISTRIBUTION CURVE UNIT:CD C PLANE ISOLUX DIAGRAM (UNIT:lx) MH(m) 2 14 3-15 -/+18 15 18 22-15 -/+18 15 4 5-12 12 26-12 12 6 3 7-9 9 34-9 9 8 3 38 5 9-6 6 9 12 6 42 46-6 1 15 2 6 1 11-3 15 3 UNIT:cd C/18,158.3 C3/21,158. C6/24,157.3 C9/27,157.8 AVERAGE BEAM ANGLE(5%):157.9 DEG 5. 17. 34. 4.7.78 S(m) 3.9.63 3.1.39 2.4.31 1.6.24-3 25 3 UNIT:cd C/18, 79.,79.4 C9/27, 78.4,79.6 AVERAGE BEAM ANGLE(5%):158.2 DEG 12. 4.5 9. 21 35. S(m) 17 28. 14 17. 1 14. 69. 1. 55 W LIGHT DISTRIBUTION CURVE UNIT:CD C PLANE ISOLUX DIAGRAM (UNIT:lx) MH(m) 1 14 -/+18 18-15 15 22-12 12 26 3-9 9 34 4 38-6 8 12 16 6 42 46-3 2 3 UNIT:cd C/18,157.8 C3/21,158.2 C6/24,157.7 C9/27,158.1 AVERAGE BEAM ANGLE(5%):158. DEG 5. 17. 34. 6.5 1.1 S(m) 5.4.87 4.4.54 3.3.44 2.2.33
PACKAGE CONTENTS: Description Q-ty LED Canopy with j-box Fixture 1 Box 1 Installation Instructions 3 ELECTRICAL SCHEMATIC DIAGRAM DIMMABLE FIXTURE ELECTRICAL SCHEMATIC DIAGRAM DIMMABLE MOTION SENSOR FIXTURE Power connector 12~277V 5/6 Hz L N G L (live/hot) connect black N (neutral) connect white Ground connect green L N DRIVER Dim + (Violet) Dim - (Gray) Power connector 12~277V 5/6 Hz L N G L (live/hot) connect black N (neutral) connect white Ground connect green MOTION SENSOR Dim + (Violet) Dim - (Gray) L N DRIVER WARNING RISK OF PERSONAL INJURY READ and follow all WARNINGS and installation instructions. Keep or give to the owner for future reference. Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from carton, handling, installing, and maintaining this product. Risk of electric shock: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Risk of Fire: Minimum 9 С supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. ASD assumes no responsibility for claims arising out of improper or careless Installation or handling of this product. ASD LIGHTING MOTION SENSING FEATURES AND INSTRUCTION MERRYTEK MC65V Microwave technology allows for active motion sensing regardless of background temperature or line of sight issues Motion easily detected through plastic, glass and other thin non-metal material Sensors are completely contained within the enclosure for IP65 rating 1-1 V interface allows for multiple dimming levels and functionality (see below) Integral daylight sensor allows light activation at defined brightness threshold Precise daylight thresholds, time delays and detection areas set via DIP switch (see sensor settings) Dimming Function: 3 Step 1% Low Light - Off Situation Sufficient Light Insufficient light and motion After hold time No further motion After standby period Light status OFF ON-1% Low Light Off Dimming Function: 2 Step 1% Low Light Situation No Motion Motion After hold up time No further motion Light Status LOW LIGHT On 1% Low Light Note: 2 step dimming requires that daylight sensor be set to disable mode.
Motion Sensor Specifications Input Voltage 12-277 VAC 5/6HZ Max Load 4W @12 VAC, 8W 2 277VAC Standby Power <1W Detection Sensitivity 25% / 5% / 75% / 1% Hold Time 5S / 3S / 9s / 3min / 2 min / + Daylight Sensor 5lux/15lux/3lux/5lux/1lux/15lux/ disable Standby Period S/5s/5min/1min/3min/1hr/+ Standby Dimming Level 1% / 2% / 3% / 5% Suggested Mounting Height 6.5-26ft (2.5-8m) / 33ft (1m) Max Detection Range 26ft (8m) (1ft (3m) mounting height) Detection Angle 15 ⁰ (wall installation) 36 ⁰ (ceiling installation ) Operating Temperature 4 to 113 Sensor Settings: Use the following DIP switch settings to set dimming levels, hold times, standby periods, detection area and daylight sensor mode. By selecting the combination switches to reach the desired sensor settings. Each switch will indicate ON when moved UP. Detection Area Reduce detection area by selecting these switch combinations. Hold Time Refers to the time the lamp remains at 1% after no further motion is detected Stand by Period Refers to the time the light stays on at low light level before it shuts completely off in the long absence of motion. Daylight sensor switch must be enabled Stand by Dimming Period This is the low light level after the hold time in the long absence of motion Daylight Sensor The sensor can be set to allow for illumination at a desired brightness. When set to disable mode, the daylight sensor will turn on the light when there is motion regardless of the ambient light level 1 lux, 5 lux: for darkness operation only. Note: the sensor is only active when the light is totally off. 1 2 I ON ON 1% II ON - 75% III - ON 5% IV - - 25% 3 4 5 I ON ON ON 5s II - ON ON 3s III ON - ON 9s IV - - ON 3min V ON ON - 2min VI - - - + 6 7 8 I ON ON ON S II - ON ON 5S III ON - ON 5min IV - - ON 1min V ON ON - 3min VI - ON - 1h VII - - - + 1 2 I ON ON 5% II - ON 3% III ON - 2% IV - - 1% 3 4 5 6 I ON ON ON ON 5lux II - ON ON ON 15lux III ON - ON ON 3lux IV - - ON ON 5lux V ON ON - ON 1lux VI ON ON ON - 15lux VII - - - - Disable
INSTALLATION GUIDE IMPORTANT SAFETY INFORMATION: Please read all the instructions below before installation. Make sure that the supply voltage corresponds to the rated product voltage. The product must be installed by a qualified electrician in accordance with the National Electrical Code and corresponding local codes. If the product is damaged, do not use it. INSTALLATION STEPS SURFACE MOUNT 1. Fix the driver box cover on the ceiling 2. Insert the mounting hole of radiator horizontally on the shaft of driver cover 3. Wiring: Fixture without sensor Connect black wire to line (hot), white wire to neutral, and green to ground. If dimming required, use the provided dimming leads (Dim+ and Dim- leads). If dimming is not required, leave caps on dimming leads. Fixture with sensor Adjust the sensor settings, and then connect black wire to line (hot), white wire to neutral, and green to ground. 4. Turn the radiator up then cover the driver box. Lock the two cap screw. 1. 3. 2. 4. 1 2 POLE MOUNT 1. Fix the driver box cover on ¾ pole by 2 customer supplied locknuts 2. Insert the mounting hole of radiator horizontally on the shaft of driver cover 3. Wiring: Fixture without sensor Connect black wire to line (hot), white wire to neutral, and green to ground. If dimming required, use the provided dimming leads (Dim+ and Dim- leads). If dimming is not required, leave caps on dimming leads. Fixture with sensor Adjust the sensor settings, and then connect black wire to line (hot), white wire to neutral, and green to ground. 4. Turn the radiator up then cover the driver box. Lock the two cap screw. 1. 3. 2. 4. 1 2
SURFACE MOUNTING BRACKET 1. 1. Fix the upper bracket on the ceiling. 2. Fix the lower bracket with driver box cover. 3. Align with holes of upper and lower bracket; tighten with screws; insert the mounting hole of radiator horizontally on the shaft of driver cover. 4. Wiring Fixture without sensor 2. Connect black wire to line (hot), white wire to neutral, and green to ground. If dimming required, use the provided dimming leads (Dim+ and Dim leads). If dimming is not required, leave caps on dimming leads. Fixture with sensor Adjust the sensor settings, and then connect black wire to line (hot), white wire to neutral, and green to ground. Turn the radiator up then cover if the fixture with is equipped with sensor, adjust the sensor setting. 5. Lock the two cap screws, the product is installed. 3. 4. 5. 1 2
ORDERING INFORMATION LED CANOPY WITH J-BOX ORDERING INFORMATION: Model Watts UPC GTIN14 Product Code Pcs in one Carton Carton Size Carton Weight ASD-CAN4-4D4W-PRM 4 W 819212168 18192121687 25.114 4 21.65" x 13" x 11.42" 22.4 lbs ASD-CAN4-4D4B-PRM 4 W 819212173 181921217 25.116 4 21.65" x 13" x 11.42" 22.4 lbs ASD-CAN4-55D4W-PRM 55 W 8192121697 18192121694 25.115 4 21.65" x 13" x 11.42" 23.3 lbs ASD-CAN4-55D4B-PRM 55 W 819212171 18192121717 25.117 4 21.65" x 13" x 11.42" 23.3 lbs ASD-CAN4-55D4B-MS-PRM 55 W 8192121727 18192121724 25.118 4 21.65" x 13" x 11.42" 23.5 lbs ASD-CAN4-55D4W-MS-PRM 55 W 8192121734 18192121731 25.119 4 21.65" x 13" x 11.42" 23.5 lbs ASD-CAN4-75D5B-PRM 75 W 8192122236 18192122233 25.121 2 15.3" x 12.4" x 12.8" 17.2 lbs SURFACE MOUNTING BRACKET: Model Materials Weight Dimensions Pcs in one Carton Carton Size Carton Weight ASD-LSB2-PDB Aluminum 2.86 lb (1.3 kg) 5 3/4" x 4 3/4" x 2 5/16" 1 23.2" x 16.1" x 9.6" 31.46 lbs Model UPC GTIN 14 Product Code ASD-LSB2-PDB 819212267 18192122677 27.55