07/2014 VERSION 4 % DISCOUNT OFF PRICE PAGES/CRANES Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Jim McLaughlin 3804 Hwy 75 North PO 336 Moorhead, MN 56560 218-233-8681 800-232-3787 218-233-9548 jimmc@bertsoline.com www.bertsonline.com or www.liftmooore.com PRICING METHOD 2 - PERCENTAGE DISCOUNT OFF LIST 1.0 CRANE/MAKE/MANUFACTURER Liftmoore, Inc Manufacture Standard Warranty (include months, years, hours) 12 months Percentage Discount to be applied to Price List 0 = % Discount Date & Price List I.D. Number 2.0 OPTIONS (If not included in list) See Price Schedule Use this section to offer additional crane extension options (both manual and hydraulic), outrigger options, control options, etc. Number these options starting with 2.1, 2.2, etc. 2.1 2.2 3.0 EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 3.1, 3.2, etc. (Specify years, months, or hours extended term covers.) 3.1 3.2 Price: None Available 4.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED DELIVERY STARTING POINT - City, State, Zip Moorhead, MN Price per loaded mile 2 5.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS None AND ACCESSORIES - (See Special Terms and Conditions) Price List Date and Number NOTE: The Discount to be Applied to Price List" must be a numberic percentage. Not listing a numberic percentage may result in your bid being rejected. 6.0 INSTALLATION SERVICES MAY BE REQUESTED ON AN AS NEEDED BASIS. See Special Terms and Conditions Per Hour $ 90.00 per hour
Bert's Contract Price Notice of New Crane requirements when used in the Construction Industry as per OSHA (Standard - 29 CFR) 1926.1400 Safety and Health Regulations Cranes in Construction 1926.1441(d)(2) Equipment Manufactured after NOV 8, 2011 with a lifting capaity of 2,000 Lbs or less that is used in the construction industry are required to have an anti two-block device that meets the requirements of 1926.1416(d)(3) Item Optional ANTI Two-Block added to any 2,000 Lbs crane at time of Order 1.00 The Anti Two-Block is not offered on the L-8 Crane. Not avalible as a retrofit. $ 336.00
L Series 1.01 L-8 ( 39005 ) 4500 Ft-Lb. Moment Rating. Capacity 800 Lbs. at all Load Radii Boom telescopes manually from 3 Ft. to 5 Ft. 25 Ft. of 3/16 In. Galvanized Aircraft Cable. 12.5 Ft. long Pendant Control. 25 Ft. Battery Wire, Ground Wire and 150 Amp. Circuit Breaker. Shipping Weight: 425 Lbs. 1.02 L-21 ( 38994 ) 6000 Ft.-Lb. Moment Rating. Capacity 2000 Lbs. at 3 Ft. Boom telescopes manually from 3 Ft. to 5 Ft. Includes 25 Ft. of 3/16 In. Galvanized Aircraft Cable. Includes Traveling Block. 12.5 Ft. Remote Pendant Control. 25 Ft. of Battery Power Cable, 3 Ft. Battery Ground Cable and 150 Amp. Circuit Breaker. Shipping Weight: 430 Lbs. 1.03 L-21-7 ( 38995 ) Same as L-21 above except boom telescopes from 3' 3" to 7' 3" in two stages. Shipping Weight: 450 Lbs. 1.04 L-21W ( 39057 ) Same as L-21 except with larger 2.7 HP, 2000 lbs single line pull capacity winch, includes 62 ' of 1/4" Galvanized Aircraft Cable with Hook and Safety latch Shipping Weight: 500 Lbs. 1.05 L-21W-7 ( 39042 ) Same as L-21W except boom length telescopes from 3' 3" to 7' 3". Shipping Weight: 510 Lbs. $ 1,948.00 $ 2,390.00 $ 2,572.00 $ 3,231.00 $ 3,343.00
1.06 NOTE: For Service Body Corner Mount, order shortened pedestal, deduct $40.00 from List Price. $ (40.00) Manual Rotation 206EL 1.07 206EL ( 38880 ) 6,500 Ft. - Lbs. Moment Rating. 2000 Lbs. capacity at a 3 Ft. load radius. Boom Length 5 1/2 Ft. to 9 Ft. manualy extended Power Up, Gravity Down Boom Elevation Load Sensor Included Efficient Planetary Gear Winch with Permanent Magnet Motor. Includes 35 Ft. of 3/16" Galvanized Aircraft Cable. 18 Ft. Remote Pendant Control Travel block for double line use above 1000 Lbs. Shipping Weight 485 Lbs. $ 4,260.00 1.08 NOTE: $ 625.00 Upgrade with larger 2.7 HP, 2000 lb single line pull capacity winch and 62 Ft. of wire rope for below ground level use. Travel block replaced with down haul pickle weight. 1.09 NOTE: For Service Body Corner Mount, order shortened pedestal, deduct $40.00 from List Price $ (40.00) 2000A 1.10 2000A ( 39041 ) 6,000 FT.- Lb. Moment Rating. 2000 Lbs. capacity at a 3 Ft. load radius Boom Length 5 1/2 ft. to 9 Ft. manualy extended Efficient Planetary Gear Winch with a 2.7 HP Permanent Magnet Motor. Single Line capacity of the winch is 2000 Lbs. 40 Ft. of 1/4" Galvanized Aircraft Cable is standard 12 Ft. Pendant Contrtol Manual Rotation and Manual Boom Elevation 25 Ft. of Battery Power Cable, 3 Ft. Ground Wire and
150 Amp Circuit Breaker. Shipping Weight: 490 Lbs. $ 3,453.00 Accessories (Outriggers, etc.) are listed at the end of this price list. Power Rotation 206R & 206REL 6,500 Ft-Lbs. Moment Rating 2000 Lbs. capacity at a 3 Ft. Radius Efficient Planetary Gear Winch with Permanent Magnet Motor. Boom length is 5.5 Ft. manualy extended to 9 ft. Includes 35 Ft. of 3/16" Galvanized Aircraft Cable. Travel block for double line use above 1000 Lbs. Can be easly adapted to either Flat Bed or Utility Body Corner Mount. 1.11 206R ( 38907 ) Power Rotation, Manual Boom Elevation Rotation is Continuous and Unlimited. Rotation is powered by a 12V Dc Electric Motor. Gas Spring used for assisting boom Elevation. Shipping Weight 465 Lbs. $ 4,788.00 1.12 206REL ( 38873 ) Power Rotation and Boom Elevation. Rotation is Continuous and Unlimited. Rotation and Boom elevation are powered by a 12V Dc powered Hydraulic pump. 18 Ft. Remote Pendant Control A load limiting sensor is included. Shipping Weight: 525 Lbs. $ 6,453.00 1.13 NOTE: $ 625.00 Upgrade with larger 2.7 HP, 2000 lb single line pull capacity
winch and 62 Ft. of wire rope.for below ground level use. Travel block replaced with down haul pickle weight. 1.14 NOTE: For Service Body Corner Mount, order shortened pedestal, deduct $40.00 from List Price $ (40.00) Accessories (Outriggers, etc.) are listed at the end of this price list. 12V D. C. ELECTRIC CRANE LA6K 6,600 Ft-Lbs. Moment Rating 2000 Lbs. capacity at a 3 Ft. Radius efficient Planetary Gear Winch with Permanent Magnet Motor. includes 50 Ft. of 3/16" Galvanized Aircraft Cable. continuous and unlimited power rotation, rotates on a ball bearing slewing ring, driven by a low speed high torque hydraulic motor. power boom extension from 5.5 to 8.5 ft with a manual pull out to 11.5 ft. hydraulic elevated boom to 75 degrees. boom folds vertically for storage load sensor is standard travel block for easy two part line hook up 18 ft long wired pendant control 25 ft of Battery Power cable, 3 Ft. Battery Ground wire, 150 Amp Circuit Breaker. Master Disconnect Switch. 1.15 LA6K EX-11 $ 8,221.00 ( 39018 ) Shipping Weight: 1250 Lbs.
Accessories (Outriggers, etc.) are listed at the end of this price list. 12V D. C. ELECTRIC CRANE 208EL and 2700AR 8,100 Ft.-Lb. Moment Rating. 12 V. D. C. Planetary Gear Winch. 62 Ft. of 1/4 In. Galvanized Aircraft Cable. Pendant Control is 3 Ft. longer than the extended boom. 25 Ft. of Battery Power Cable, 3 Ft. Battery Ground Wire, Circuit Breaker and Master Cutoff Switch included. Load sensor is Standard 1.16 208EL-10 Max Capacity 2000Lbs at 4 Ft. Manual Rotation Power up Gravity down boom elevation Boom Cylinder elevated by Electric-Hydraulic Pump. Boom Length is 6 Ft. to 10 Ft. manualy extended Shipping Weight: 610 Lbs. $ 4,996.00 1.17 208EL-14 ( 39116 ) Max Capacity 2000Lbs at 4 Ft. Manual Rotation Power up Gravity down boom elevation Boom Cylinder elevated by Electric-Hydraulic Pump. Boom Length is 6 Ft. to 14 Ft. in two stages, manually extended. Shipping Weight: 645 Lbs. $ 5,100.00 1.18 2700AR-10
( 39049 ) Max Capacity 2700 Lbs. at 3 Ft. Unlimited Power Rotation is standard Power Boom Up and Down Boom standard. Cylinder equiped with load holding Counterbalance Valve. Boom Length is 6 Ft. to 10 Ft. manualy extended New Feature - ANTI-TWO Block is now standard. Shipping Weight: 660 Lbs. $ 7,302.00 12V D. C. ELECTRIC CRANE 1.19 2700AR-14 ( 39043) Max Capacity 2700 Lbs. at 3 Ft. Unlimited Power Rotation is standard Power up / Down Boom with Counterbalance Valve. New Feature - ANTI-TWO Block is now standard. Shipping Weight: 700 Lbs. 3200REL & 3200REE 10,000 Ft.-Lb. Moment Rating. Capacity 3200 Lbs. at 3 Ft. 12 V. D. C. Planetary Gear Winch. All Powered Functions are 12 V. D. C. Includes 62 Ft. of 1/4 In. Galvanized Aircraft Cable, Traveling Block. Pendant control is 18 Ft. long. Load sensor and ATB is now standard on All 3200 Series Cranes Meets requirements of 29 CFR 1910.180, ANSI B30.5, SAE J1063 1.20 3200REL-11 ( 39040 ) Power Rotation and Power Boom Elevation. Boom Length 7 Ft. to 11 Ft. Shipping Weight: 720 Lbs. $ 7,406.00 $ 7,510.00 1.21 3200REL-15 ( 39054 ) Power Rotation and Power Boom Elevation. Boom Length 7 Ft. to 15 Ft. in two stages. Shipping Weight: 755 Lbs. $ 7,614.00
1.22 3200REE-11 ( 39108 ) Power Rotation and Power Boom Elevation and Power Boom Extension from 7 Ft. to 11 Ft. Shipping Weight: 780 Lbs. 1.23 3200REE-15 ( 39102 ) Power Rotation and Power Boom Elevation and Power Boom Extension from 7 Ft. to 11 Ft. with Manual Extension from 11 Ft. to 15 Ft. Shipping Weight: 830 Lbs. $ 9,080.00 $ 9,242.00 Accessories (Outriggers, etc.) are listed at the end of this price list. 12V D. C. ELECTRIC CRANE 3612 12,000 Ft.-Lb. Moment Rating. Capacity 3600 Lbs. at 3 Ft. 3 in. All Powered Functions are 12 V. D. C. efficient Planetary Gear Winch Includes 62 Ft. of 1/4 In. Galvanized Aircraft Cable Traveling Block 18 Ft. long Pendant Control. Load Limiting Sensor. Anti Two-Block is standard. 25 Ft. of Battery Power Cable. 3 Ft. Battery Ground Wire. 150 Amp Circuit Breaker. Master Disconnect Switch. Meets requirements of 29 CFR 1910.180, ANSI B30.5, SAE J1063 1.24 3612REE-15 ( 39082 ) Power Rotation and Power Boom Elevation Power Extension from 7 Ft. to 11 Ft. with Manual Extension from 11 Ft. to 15 Ft. Shipping Weight: 825 Lbs. $ 9,607.00 1.25 3612X 9-15
( 39???) Power Rotation and Power Boom Elevation, Power Extension from 9 Ft.to 15 Ft. Shipping Weight $ 9,728.00 Accessories (Outriggers, etc.) are listed at the end of this price list. 12V D. C. ELECTRIC CRANE 4000X 16,000 Ft.-Lb. Moment Rating. Capacity 4000 Lbs. at 4 Ft. 12 V. D. C. Planetary Gear Winch. All powered functions are 12 V. D. C. 85 Ft. of 1/4 In. Galvanized Aircraft Cable. Traveling Block. 25 Ft. long Pendant Control. 25 Ft. of Battery Power Cable. 3 Ft. Battery Ground Wire. 150 Amp Circuit Breaker. Master Disconnect Switch. Load Limiting Sensor. Anti Two-Block is included. Meets requirements of 29 CFR 1910.180, ANSI B30.5, SAE J1063 1.26 4000X-16 ( 39039 ) Power Rotation and Power Boom Elevation and Power Boom Extension from 8 Ft. to 12 Ft. with Manual Extension from 12 Ft. to 16 Ft. Shipping Weight: 960 Lbs. $ 11,235.00 1.27 4000X-20
( 39038 ) Same as 4000X-16 except boom extends 10 to 16 Ft. hydraulically with a 4 Ft. Manual Extension to 20 Ft. Shipping Weight: 995 Lbs. $ 11,495.00 Accessories (Outriggers, etc.) are listed at the end of this price list. 12V D. C. ELECTRIC CRANE 5000WX 25,000 Ft.-Lb. Moment Rating. Capacity 5000 Lbs. at 5 Ft. Load Radius. 12 V. D. C. Planetary Gear Drive Electric Winch. Continuous, Unlimited Power Rotation. Power Boom Elevation. Pendant Control 25 Ft. long. 25 Ft. of Battery Power Cable and 3 Ft. of Battery Ground Wire. 150 Amp Circuit Breaker and Master Disconnect included. Includes 80 Ft. of 5/16" Galvanized Aircraft Cable. Traveling Block with Roller Bearing Swivel Safety Hook. Anti Two-Block is included. Load Sensor is included. Drum to Wire Rope Ratio meets ANSI requirements. Crane meets OSHA 29 CFR 1910.180 and ANSI B30.5. Tested with Strain Gages as required by SAE J1063. 1.28 5000WX-16 ( 39061 ) Power Telescoping Boom from 10 Ft. to 16 Ft. $ 14,356.00
Shipping Weight: 1510 Lbs. 1.29 5000WX-20 ( 38972 ) Power Telescoping Boom from 10 Ft. to 16 Ft. with Manually Extendable Section from 16 Ft. to 20 Ft. Shipping Weight: 1545 Lbs. $ 14,633.00 Accessories (Outriggers, etc.) are listed at end of this price list. 12V D. C. ELECTRIC CRANE 6036WX & 6036DX 36,000 Ft.-Lb. Moment Rating. Capacity 6,000 Lbs. at 6 Ft. Load Radius. Includes Continuous and Unlimited Power Rotation, Power Extension 10 to 16 Ft. Load Sensor and Anti Two-Block included. Remote Pendant Control 25 Ft. long. Meets requirements of 29 CFR 1910.180, ANSI B30.5, SAE J1063 Efficient Planetary Gear driven Winch with Series Motor 1.30 6036WX-16 ( 39048 ) With 10 Ft. to 16 Ft. Power Telescoping Boom. Shipping Weight: 1650 Lbs. $ 15,200.00 1.31 6036WX-20 ( 39058 ) Powered Extension from 10 Ft. 4 In. to 16 Ft. 4 In. Manual Pullout Section of 3 Ft. 8 In. for total
Extension of 20 Ft. Shipping Weight: 1710 Lbs. 6036DX-22 1.32 6036DX-22 ( 39019 ) Powered Boom Extension from 11 to 22 Ft. Shipping Weight : 2025 Lbs. $ 15,494.00 $ 16,847.00 Accessories (Outriggers, etc.) are listed at end of this price list. HYDRAULIC CRANE 1032X & XP 10,000 Ft.-Lbs. Moment Rating. 3200 Lbs. Maximum Lifting Capacity at 3 Ft. Load Radius. 62 Ft. of 1/4 In. Galvanized Aircraft Cable. Removeable Remote Pendant Control 18 Ft. long. Rotation limited to 365 Degrees. Pump, Reservoir and Hoses not included. Pump should supply 6 GPM at 2500 PSI. Anti Two-Block is standard feature. Load Sensor is standard feature. Meets requirements of 29 CFR 1910.180, ANSI B30.5, SAE J1063 1.33 1032X-11 ( 38924 ) Power Hoist, Power Boom Elevation, Power Rotation Power Boom Extension. Boom Length telescopes under power from 7 Ft. to 11 Ft. Shipping Weight: 880 Lbs. $ 10,716.00
1.34 1032X-15 ( 38839 ) Power Hoist, Power Boom Elevation, Power Rotation Power Boom Extension. Boom Length telescopes under power from 7 Ft. to 11 Ft. and Manually from 11 Ft. to 15 Ft. Shipping Weight: 910 Lbs. $ 10,855.00 PROPORTIONAL HYDRAULIC CONTROL 1.35 1032XP-15 ( 39097 ) Same crane as 1032X-15 except with Proportional Hydraulic Controls. Shipping Weight: 910 Lbs. $ 11,809.00 Accessories (Outriggers, etc.) are listed at end of this price list. HYDRAULIC CRANE 1640X & XP 16,000 Ft.-Lbs. Moment Rating. 4000 Lbs. Maximum Lifting Capacity at 4 Ft. Load Radius. 70 Ft. of 1/4 In. Galvanized Aircraft Cable. Removeable Remote Pendant Control 20 Ft. long. Rotation limited to 365 Degrees. Pump, Reservoir and Hoses not included. Pump should supply 6 GPM at 2500 PSI. Battery Wire, Fuse and Electrical Cut Off Switch included. Anti Two-Block included. Load Sensor is included. Meets requirements of 29 CFR 1910.180, ANSI B30.5, SAE J1063 1.36 1640X-16 ( 39032 ) Power Hoist, Power Boom Elevation, Power Rotation Power Boom Extension. Boom Length telescopes under power from 8 Ft. to 12 Ft. and Manually from
12 Ft. to 16 Ft. Shipping Weight: 1000 Lbs. 1.37 1640X-20 ( 39089 ) Same as 1640X-16 except boom extends 10 to 16 Ft. hydraulically with a 4 Ft. Manual Extension to 20 Ft. Shipping Weight: 1070 Lbs. $ 12,568.00 $ 12,828.00 PROPORTIONAL HYDRAULIC CONTROL 1.38 1640XP-16 ( 39106 ) Same crane as 1640X-16 except with Proportional Hydraulic Controls. Shipping Weight: 1015 Lbs. 1.39 1640XP-20 ( 39051 ) Same as 1640XP-16 except boom extends 10 to 16 Ft. hydraulically with a 4 Ft. Manual Extension to 20 Ft. Shipping Weight: 1070 Lbs. $ 13,522.00 $ 13,782.00 Accessories (Outriggers, etc.) are listed at the end of this price list. HYDRAULIC CRANE 2550X & XP 25,000 Ft.-Lb. Moment Rating. Capacity 5000 Lbs. at 5 Ft. Load Radius Hydraulically powered Rotation, Winch, Boom Elevation. Continuous, Unlimited Rotation. Removeable Pendant Control 25 Ft. Long. Includes 80 Ft. of 5/16" Galvanized Aircraft Cable. Traveling Block with Swivel Safety Hook. Anti Two-Block is included. Load Sensor is included. Drum to Wire Rope Ratio meets ANSI requirements. Pump, Reservoir and Hoses not included. Pump should supply 6 GPM at 2750 PSI. Meets requirements of 29 CFR 1910.180, ANSI B30.5, SAE J1063
1.40 2550X-16 (39029) Power Boom Elevation, Power Rotation and Power Boom Extension from 10 Ft. to 16 Ft. Shipping Weight: 1430 Lbs. 1.41 2550X-20 ( 39100 ) Power boom Elevation, Power Rotation and Power Boom Extension from 10 Ft. to 16 Ft. 4 Ft. Manual Boom Extension from 16 Ft. to 20 Ft. Shipping Weight: 1540 Lbs. PROPORTIONAL HYDRAULIC CONTROL 1.42 2550XP-16 ( 39091 ) Same as 2550X-16 except that Proportional Hydraulic Control is added. Shipping Weight: 1435 Lbs. 1.43 2550XP-20 ( 39107 ) Same as 2550X-20 except that Proportional Hydraulic Control is added. Shipping Weight: 1545 Lbs. $ 13,626.00 $ 13,886.00 $ 14,579.00 $ 14,840.00 Accessories (Outriggers, etc.) are listed at the end of this price list. HYDRAULIC CRANE 3660X & XP 36,000 Ft.-Lb. Moment Rating. Capacity 6000 Lbs. at 6 Ft. Load Radius Hydraulically powered Rotation, Winch, Boom Elevation and Boom Extension. Continuous, Unlimited Rotation. Removeable Pendant Control is 25 Ft. long. Includes 95 Ft. of 3/8" Galvanized Aircraft Cable. Includes Traveling Block with Swivel Safety Hook. Anti Two-Block is included. Load Sensor is included. Drum to Wire Rope Ratio meets ANSI requirements. Pump, Reservoir and Hoses not included. Pump should supply 6 GPM at 2750 PSI.
Meets requirements of 29 CFR 1910.180, ANSI B30.5, SAE J1063 1.44 3660X-16 ( 38683 ) Boom Length 10 Ft. to 16 Ft. Shipping Weight: 1690 Lbs. 1.45 3660X-20 ( 39021) Power Boom from 10 Ft. to 16 Ft. with Manual Extension from 16 Ft. to 20 Ft. Shipping Weight: 1750 Lbs. $ 14,575.00 $ 14,887.00 PROPORTIONAL HYDRAULIC CONTROL 1.46 3660XP-16 ( 38826 ) Same as 3660X-16 except Proportional Control Hydraulic System is added. Shipping Weight: 1695 Lbs. 1.47 3660XP-20 ( 38873 ) Same as 3660X-20 except Proportional Control Hydraulic System is added. Shipping Weight: 1755 Lbs. $ 15,529.00 $ 15,841.00 Accessories (Outriggers, etc.) are listed at end of this price list. HYDRAULIC CRANE 4064XP 40,000 Ft.-Lb. Moment Rating. Capacity 6400 Lbs. at 6.2 Ft. Load Radius Hydraulically powered Rotation, Winch, Boom Elevation and Boom Extension from 10 to 22Ft. Continuous, Unlimited Rotation. High Speed Planetary Gear Winch External Rotation Gear with Bronze Alloy Worm Gearbox Wireless or Removeable Wired Pendant Control. Includes 95 Ft. of 3/8" Galvanized Aircraft Cable. Includes Traveling Block with Swivel Safety Hook. Anti Two-Block is included. Load Sensor is included.
Drum to Wire Rope Ratio meets ANSI requirements. Pump, Reservoir and Hoses not included. Pump should supply 8 GPM at 2750 PSI. Meets requirements of 29 CFR 1910.180, ANSI B30.5 and SAE J1063 1.48 4064XP-22 ( 38858 ) Standard Removeable Pendant Control. Shipping Weight: 2065 Lbs. 1.49 4064XP-22 ( 39099 ) Wireless Remote Control with CAN Wire Shipping Weight: 2065 Lbs. $ 17,036.00 $ 18,050.00 Accessories (Outriggers, etc.) are listed at end of this price list. HYDRAULIC CRANE 5080X & XP 50,000 Ft.-Lb. Moment Rating. Capacity 8000 Lbs. at 6 Ft. Load Radius. Hydraulically powered Rotation, Winch, Boom Elevation and Boom Extension. Continuous, Unlimited Rotation unless additional electrical controls are added to the Pendant. Removeable Pendant Control is 25 Ft. Long. Includes 95 Ft. of 3/8" Galvanized Aircraft Cable.
Includes Traveling Block with Swivel Safety Hook. Anti Two-Block included. Load Sensor is included. Drum to Wire Rope Ratio meets ANSI requirements. Pump, Reservoir and Hoses not included. Pump should supply 6 GPM at 2750 PSI. Meets requirements of 29 CFR 1910.180, ANSI B30.5 and SAE J1063 1.50 5080X-20 ( 39078 ) Power Boom from 10 Ft. to 16 Ft. with Manual Extension from 16 Ft. to 20 Ft. Shipping Weight: 2000 Lbs. $ 17,381.00 PROPORTIONAL HYDRAULIC CONTROL 1.51 5080XP-20 ( 39096 ) Power Boom from 10 Ft. to 16 Ft. with Manual Extension from 16 Ft. to 20 Ft. Proportional Flow Control for Powered Functions. Shipping Weight: 2005 Lbs. $ 18,334.00 Accessories (Outriggers, etc.) are listed at end of this price list. HYDRAULIC CRANE 60100XP 60,000 Ft.-Lb. Moment Rating. Capacity 10,000 Lbs. at 6 Ft. Load Radius. Proportional Hydraulic Control. Hydraulically powered Rotation, Winch, Boom Elevation and Boom Extension. Continuous, Unlimited Rotation FM Radio Remote Control.
Includes 100 Ft. of 7/16" Galvanized Aircraft Cable. Includes Traveling Block with Ball Bearing Swivel Safety Hook. Anti Two-Block included. Load Sensor is included. Drum to Wire Rope Ratio meets ANSI requirements. Pump, Reservoir and Hoses not included. Pump should supply 8 GPM at 2750 PSI. Meets requirements of 29 CFR 1910.180, ANSI B30.5, SAE J1063 NOTE: Wireless Control is standard equipment on this model. 1.52 60100XP-24 ( 39105 ) Includes Power Boom extension from 12 Ft. to 24 Ft. Shipping Weight: 2810 $ 21,658.00 Accessories (Outriggers, etc.) are listed at end of this price list. HYDRAULIC CRANE 72100XP 72,000 Ft.-Lb. Moment Rating. Capacity 10,000 Lbs. at 7.2 Ft. Load Radius. Proportional Hydraulic Control. Hydraulically powered Rotation, Winch,
Boom Elevation and Boom Extension. Continuous, Unlimited Rotation FM Radio Remote Control. Includes 100 Ft. of 7/16" Galvanized Aircraft Cable. Includes Traveling Block with Ball Bearing Swivel Safety Hook. Anti Two-Block included. Load Sensor is included. Drum to Wire Rope Ratio meets ANSI requirements. Pump, Reservoir and Hoses not included. Pump should supply 8 GPM at 2750 PSI. Meets requirements of 29 CFR 1910.180, ANSI B30.5, SAE J1063 NOTE: Wireless Control is standard equipment on this model. 1.53 72100XP-21 ( 38914 ) Power Boom from 11 Ft. to 17 Ft. with Manual Extension from 17 Ft. to 21 Ft. Weight: 2770 Lbs. 1.54 72100XP-24 ( 39090 ) Includes Power Boom extension from 11 Ft. to 24 Ft. Weight: 2870 Lbs. $ 24,224.00 $ 26,314.00 Accessories (Outriggers, etc.) are listed at end of this price list. ACCESSORIES NOTE: 10K, 18K, 25K, 36K, 50K & 72K refer to the crane moment rating in 1000 Ft.-Lbs. JACKSTANDS 2.01 30328 10K Ft.-Lbs. Over-Center Type (13 Lbs.). $ 98.00
2.02 38638 10K Ft.-Lbs. Over-Center Type (Left Side) $ 98.00 2.03 38518 10K Ft.-Lbs. Over-Center Type - Advise Height $ 108.00 2.04 31131 10K Ft.-Lbs. Drop Down Square Tube, Permanent Mount with Screw Base (36 Lbs.). $ 219.00 2.05 30329 36K Ft.-Lbs. Over-Center Type (27 Lbs.) $ 131.00 2.06 38658 36K Ft.-Lbs Over-Center Type (Left Side) $ 131.00 2.07 38517 36K Ft.-Lbs. Over-Center Type - Advise Height $ 157.00 MANUAL OUTRIGGERS Manual outriggers include a crank down jack and detents at both the extended and retracted positions. 2.08 38885 10K Ft.-Lbs. Outrigger, Jack on one side only $ 553.00 2.09 38860 10K Ft.-Lbs. Outrigger, For 79" Body Width $ 814.00 2.10 38862 10K Ft.-Lbs. Outrigger, For 89" Body Width $ 814.00 2.11 38851 10K Ft.-Lbs. Outrigger, For 94" Body Width $ 831.00 2.12 38980 18K Ft-Lbs. Outrigger, Street side Fixed, Jack's both sides $ 1,003.00 2.13 39028 18K Ft-Lbs. Outrigger, For 95" Body Width $ 1,073.00 2.14 38426 25K Ft.-Lbs. Outrigger, For 90" Wide Truck Bed $ 1,324.00 2.15 38427 25K Ft.-Lbs. Outrigger, For 95" Wide Truck Bed $ 1,401.00 2.16 38038 36K Ft.-Lbs. Outrigger $ 1,462.00 2.17 38312 50K Ft.-Lbs. Outrigger $ 1,869.00 2.18 38804 72 Ft-Lbs. Outrigger, Street side Fixed, Jack's both sides $ 1,930.00 ACCESSORIES OUTRIGGERS, HYDRAULIC - Both Sides Extend Hydraulic outriggers are offered with either manual pull out or power extension.
The outrigger package includes: Diverter Valve for selecting either outrigger or crane operation, Lever control valve for directional control of the outrigger, Hose and fittings for cylinders and lever control valve 2.19 38461 25K Ft.-Lbs. Manual Out, Hydraulic Down $ 3,497.00 2.20 38533 25K Ft.-Lbs. Hydraulic Out, Hydraulic Down $ 4,971.00 2.21 38588 36K Ft.-Lbs. Manual Out, Hydraulic Down $ 3,827.00 2.22 38589 36K Ft.-Lbs.Hydraulic Out, Hydraulic Down $ 5,231.00 2.23 38590 50K Ft.-Lbs. Manual Out, Hydraulic Down $ 4,087.00 2.24 38591 50K Ft.-Lbs. Hydraulic Out, Hydraulic Down $ 5,492.00 2.25 38719 72K Ft.-Lbs. Manual Out, Hydraulic Down $ 4,285.00 2.26 38624 72K Ft.-Lbs. Hydraulic Out, Hydraulic Down $ 5,836.00 OUTRIGGERS, HYDRAULIC - Curb Pullout, Street Fixed 2.27 38663 25K Ft.-Lbs. Curb Hydraulic Out, Hydraulic Down Both Sides $ 4,494.00 2.28 38675 36K Ft.-Lbs. Curb Manual Out, Hydraulic Down Both Sides $ 3,792.00 2.29 38616 36K Ft.-Lbs. Curb Hydraulic Out, Hydraulic Down Both Sides $ 4,833.00 2.30 38847 72K Ft -Lbs. Curb Hydraulic Out, Hydraulic Down Both Sides $ 5,430.00 OUTRIGGERS, HYDRAULIC (For Electric Cranes) Hydraulic outriggers for electric cranes are offered with either manual or power extension. The outrigger package includes: Electric Hydraulic Pump with starter solenoid and control switch. 2.31 38583 25K Manual Out, Hydraulic Down $ 4,018.00 2.32 38923 25K Hydraulic Out, Hydraulic Down $ 5,535.00 2.33 38611 36K Manual Out, Hydraulic Down $ 4,364.00 2.34 38610 36K Hydraulic Out and Hydraulic Down $ 5,769.00 ACCESSORIES
BOOM RESTS Required for all power rotation cranes. Boom Rests are designed to hold the boom in a nearly horizontal position. A loop is included for attaching the hook. The wire line can be tightened to hold the boom securely during travel. 2.35 22134 Boom Rest for 206REL. $ 63.00 2.36 22140 Boom Rest for 206RELS. $ 61.00 2.37 22167 Boom Rest for 2000 $ 61.00 2.38 20861 Boom Rest for Model 208, 2700, 3200, 4000 & 1640 $ 63.00 2.39 24607 Boom Rest for Model 3612 $ 63.00 2.40 22158 Boom Rest, for use with Pedestal. For Model 208, 2700, 3200, 4000 & 1640 ( Non-Adjustable) $ 77.00 2.41 22162 Boom Rest for Model 5000, 2550, 6036 or 3660 $ 75.00 2.42 22165 Boom Rest, for use with Pedestal for Model 5000, 2550, 6036 or 3660. (Non-Adjustable) $ 94.00 2.43 23510 Boom Rest for 4064 $ 89.00 2.44 22160 Boom Rest for Model 5080. $ 80.00 2.45 22164 Boom Rest, for use with Pedestal for Model 5080 (Non-Adjustable) $ 96.00 2.46 20856 Boom Rest for Model 60100 & 72100. $ 84.00 ACCESSORIES
PEDESTALS Pedestals are fabricated to match the mounting requirements of the crane. Heights up to 36 inches can be supplied at the below prices. For taller pedestals contact Liftmoore. Advise height when ordering. 2.47 18375 10K for Flat Bed Mounting $ 405.00 2.48 34076 16K for Flat Bed Mounting $ 450.00 2.49 32624 25K & 36K for Flat Bed Mounting $ 476.00 2.50 23176 40K for Flat Bed Mounting $ 482.00 2.51 33654 50K for Flat Bed Mounting $ 563.00 2.52 22807 60 & 72K for Flat Bed Mounting $ 615.00 MOUNTING PLATES Mounting plates are for welding onto the truck body. They are fabricated to fit under the crane matching the bolt pattern and cutouts needed 2.53 30684 0.5" x 12" x 12" drilled for L-Series. $ 54.00 2.54 30685 0.5" x 15" x 15" for 208, 2000A, 2700, 3200 & 1032. $ 61.00 2.55 16698 0.75" x 15" x 15" for 4000 & 1640 $ 68.00 2.56 31821 0.75" x 16.75" x 16.75" for 5000, 2550, 6036 & 3660 $ 87.00 2.57 22136 0.75"x 17.75" x 17.75" for 4064 $ 96.00 2.58 33905 1" x 16.75" x 16.75" for 5080. $ 103.00 $ - 2.59 21954 1.25" x 21" x 21" for 60100 & 72100. $ 246.00 ACCESSORIES
WIRELESS CONTROL SYSTEM for HYDRAULIC CRANES WITH PROPORTIONAL CONTROLS 2.60 Add wireless control system to proportional control cranes at time of order ( replaces standard pendant control ) $ 737.00 OPTIONAL RADIO EQUIPMENT: Engine Controls: 2.61 Receiver and wire harness for Engine Controls. Note: Does not include any relays needed for the system. The crane still has continuous, unlitmited rotation. $ 642.00 For other options and special applications contact Liftmoore. WIRELESS CONTROL SYSTEM FOR ELECTRIC & HYDRAULIC CRANES WITH ON/OFF CONTROLS The Mega FM Wireless system maintains the use of the standard pendant 2.62 Mega FM Wireless Radio System added to Crane at time of order, Includes standard control pendant. $ 963.00 2.63 31545 10 Gallon Hydraulic Reservoir with Filter, Strainer, $ 590.00 and Diffuser. No Hose or Fittings. (40 Lbs.). Hydraulics Systems and Installation of Cranes
3.01 3.02 Hot Shift PTO Standard PTO Hydraulic System with hot shift PTO, Reservoir, filter, Fitting, Hydraulic Oil, etc $ 2,825.00 Hydraulic System with hot shift PTO, Reservoir, filter, Fitting, Hydraulic Oil, etc $ 2,175.00 3.03 Installtion or hydraulic Sytems $ 755.00 3.04 Flat Rate Hourly Labor Flat Rate $ 90.00 Crane Installation Charges 4.01 L-Series Models In Pick-up Box Applications $ 935.00 4.02 Materials to reinforce under Pick up box or flatbed $ 150.00 4.03 Liftmoore Electric Models 2000 6000 Models $ 665.00 4.04 Jack stands $ 90.00 4.05 Manual out/down outriggers $ 360.00 4.06 Electric/hydraulic outriggers $ 720.00 4.07 Liftmoore Hydraulic Crane Models (does not include Hydraulics) $ 665.00 4.08 Jack stands $ 90.00 4.09 Manual out/down outriggers $ 360.00 4.10 Electric/hydraulic outriggers $ 720.00 4.10 Cost per mile for pick-up or Delivery to or from Moorhead, MN $ 2.00 (Maximum charge per unit for pick-up/delivery one way $ 400.00) Buyer sguide for pricing, Make and Model of Chassis: Base Crane Jackstand/outrigger Boom Rest Additional Options: Installation Charges Delivery Body and Equipment By: Bert s Truck Equipment Inc. Jim McLaughlin, Commercial Fleet Sales 3804 Hwy 75 North Moorhead, MN 56560 800-232-3787, 218-233-8681 Fax 218-233-9548 Email: jimmc@bertsonline.com Web Site: www.bertsonline.com