ORANGE PEEL GRABS P-SERIES 1
PRODUCT SAFETY LONGEVITY EFFICIENCY Reinforced tines in different designs with welded tine tips Also available with rigid mount Oil distributor with integrated non-return valve and hydraulic hoses protected in shell carrier Swivel and bevel sealed Feedthrough and motor accessible directly Robust, fully integrated rotation Reinforced bolts, large bearing surfaces and specially coated steel bushings Cylinders hydraulically cushioned and equipped with piston rod protection Accurate fitting against distorsion; solid end stops (open and close) Meets the most important demands of the clients. The KINSHOFER P-Grapple with its two different types of 360 rotation was engineered to deliver an orange peel grapple for the handling of bulky materials with a maximum closing force and optimal weight to performance ratio in daily use. This robust tool can be used for a wide variety of jobs, e.g. scrap handling. Orange peel grapple with 4 or 5 tines and 450 litres volume for the handling of bulky scrap with excavators from 16t up to 22t operating weight, or as heavy duty version (VHD-Series) for excavators from 26t up to 200t operating weight and with up to 5000 litres volume. 2
Fully closing (F) Half closing (H) Wide tines (W) Narrow tines (T) GARANTIE WARRANTY YEARS JAHRE ANS JAAR GARANTIE WARRANTY 3
1 t 2 t 3 t... 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t... 33 t 34 t 35 t 36 t 37 t 38 t P22V Orange peel grab with 4 tines or 5 tines for the handling of bulky scrap with excavators from 16t / 35200 lbs to 22t / 48400 lbs operating weight. l 4 tines version available with pointed tines. l With 5 tines available in 4 different tine profiles: - F: fully closing tines - H: half closing tines - W: wide style of pointed tines - T: pointed tines. l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned. l Oil distribution and hydraulic hoses are protected in the centre section. l Shell bearings with high resistant steel bushings and hardened, ground pins. l Shell tips made of 500 HB cutting edge material, exchangeable individually as wear parts. l Closing force 17 kn / 3740 lbf at an Operating pressure of 35 MPa / 5040 psi. l are made out of 400 HB steel. Orange Peel Grabs with 4/5 Orange Peel Grab P22V Width E Opening A Height C max. Height C min. Volume Number Self weight Load capacity (closed) (closed) (closed) of tines (mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) P22V-450-4-T 1370 / 53.94 1910 / 75.20 1550 / 61.02 1240 / 48.82 450 / 0.59 4 810 / 1782 7000 / 15400 P22V-450-5-F 1370 / 53.94 1910 / 75.20 1550 / 61.02 1240 / 48.82 450 / 0.59 5 1145 / 2519 7000 / 15400 P22V-450-5-H 1370 / 53.94 1910 / 75.20 1550 / 61.02 1240 / 48.82 450 / 0.59 5 1035 / 2277 7000 / 15400 P22V-450-5-W 1370 / 53.94 1910 / 75.20 1550 / 61.02 1240 / 48.82 450 / 0.59 5 970 / 2134 7000 / 15400 P22V-450-5-T 1370 / 53.94 1910 / 75.20 1550 / 61.02 1240 / 48.82 450 / 0.59 5 950 / 2090 7000 / 15400 Package consists of: orange peel grab, KINSHOFER rotator, head plate and non-return valve KINSHOFER Rotator Continuous rotation and two oil passages. Overload protection is ensured by pressure relief valves. Typ Upper connection Torque Moment of deflection (width x pin-ø) max. (mm/in) (Nm/ft.lbs) (Nm/ft.lbs) KM 10 F275-60 125 x 60 / 4.92 x 2.36 2000 / 1475 14000 / 10325 KM 501 13t-25t KM 511 13t-25t KSW10 cardanic KSW21/25 cardanic upper suspension without pendulum damper upper suspension with pendulum damper adapter for System L-Lock KMS10/KHS10 incl. cardan link up to 19t / 41800 lbs adapter for System L-Lock KMS21/KHS21 incl. cardan link up to 28t / 61600 lbs adapters for quick change systems from other manufacturers or different sizes available on request Operating pressure (open/close): Recommended oil flow (open/close): Operating pressure (rotation): Recommended oil flow (rotation): max. 35 MPa (350 bar) / 5040 psi 50 - max. 150 l/min / 13.21 - max. 39.63 GPM max. 32 MPa (320 bar) / 4608 psi 20 - max. 50 l/min / 5.28 - max.13.21 GPM C min C max E A T: Small W: Wide H: Half Closing F: Fully Closing
1 t 2 t 3 t... 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t 28 t 29 t Orange Peel Grabs with 3/4 Orange peel grab with 3 tines and 600 l / 0.78 c.y. or 3 or 4 tines and 800 l / 1.05 c.y. volume for the handling of bulky scrap with excavators from 18t / 39600 lbs to 25t / 55000 lbs operating weight. Especially developed for heavy duty tasks. l Available in two different volumes and diverse tine profiles (see technical drawings below). l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned. l Oil distributor with integrated non-return valve mounted directly underneath the rotator. l Oil distribution and hydraulic hoses are protected in the carrier. l Greasing points are easily accessible. l Reinforced tines made of wear-resistant steel HB 400. l Weld-on tips made of high resistant forged and tempered steel HB 500. l High closing force 38 kn / 8360 lbf at an operating pressure of 35 MPa / 5040 psi. l Accurate fittings eliminate tine distorsion, solid end stops (open & close). l Reinforced bolts, large bearing surface for bolts, specially coated solid steel bushings. l Robust, fully integrated rotation with sturdy slewing ring with internal hoses guarantees optimum force transmission and prevents hose break. The integrated pressure relief valve protects against overcharge. l Swivel and bevel sealed. Rotary feedthrough and motor accessible directly. P25VR HD P25VR HD-800-4-W Orange Peel Grabs P25VR HD Width E Opening Height Volume Number Weight Load (closed) A C max. of tines capacity (mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) P25VR HD-600-3-W* 1420 / 55.91 2200 / 86.61 2115 / 83.27 600 / 0.78 3 1600 / 3520 3000 / 6600 P25VR HD-800-3-W* 1560 / 61.42 2200 / 86.61 2115 / 83.27 800 / 1.05 3 1490 / 3278 3000 / 6600 P25VR HD-800-4-W* 1550 / 61.02 2250 / 88.58 2120 / 83.46 800 / 1.05 4 1980 / 4356 3000 / 6600 * prices without upper adapter Package consists of: orange peel grab, integrated rotation with sturdy slewing ring, head plate, hose guard, non-return valve and bolt-on bottom plate with welded lifting eye KM 691 15t KM 691 20t KM 691 27t KM 690 15t KM 690 20t KM 690 27t OQ KSW10 rigid KSW21/25 rigid adapter connection plate for specific solutions up to 15t / 33000 lbs adapter connection plate for specific solutions up to 20t / 44000 lbs adapter connection plate for specific solutions up to 27t / 59400 lbs adapter for rigid mounting up to 15t / 33000 lbs adapter for rigid mounting up to 20t / 44000 lbs adapter for rigid mounting up to 27t / 59400 lbs bolt-on adapter for Oilquick OQ 5t to 70t / 11000 lbs to 154000 lbs bolt-on-adapter for System L-Lock KMS10/KHS10 for rigid mounting up to 19t / 41800 lbs bolt-on-adapter for System L-Lock KMS21/KHS21 for rigid mounting up to 28t / 61600 lbs adapters for quick change systems from other manufacturers or different sizes available on request P25VR HD-3-W P25VR HD-4-W Operating pressure (open/close): max. 35 MPa (350 bar) max. 35 MPa (350 bar) Recommended oil flow (open/close): 50 - max. 200 l/min 50 - max. 200 l/min Hydraulic connection (Open/Close): 1 1 Operating pressure (rotation): 17 MPa (170 bar) 17 MPa (170 bar) Recommended oil flow (rotation): 20 - max. 30 l/min / 5.28 - max. 7.93 GPM 20 - max. 30 l/min / 5.28 - max. 7.93 GPM Hydraulic connection (Rotation): 1/2 1/2 C max C min A E P25VR HD-600-3-W
1 t 2 t 3 t... 14 t 15 t 16 t... 20 t 21 t 22 t 23 t 24 t... 29 t 30 t 31 t 32 t 33 t 34 t P30VHD Orange Peel Grabs Heavy Duty with 4/5 Orange peel grab with 4 or 5 tines and 600 l / 0.78 c.y. or 800 l / 1.05 c.y. volume for the handling of bulky scrap with excavators from 20t / 44000 lbs to 30t / 66000 lbs operating weight - for heavy duty tasks. l Available in two different volumes and diverse tine profiles (see technical drawings below). l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned. l Oil distributor with integrated non-return valve mounted directly underneath the rotator. l Oil distribution and hydraulic hoses are protected in the carrier. l Greasing points are easily accessible. l Reinforced tines made of wear-resistant steel HB 400. l Weld-on tips made of high resistant forged and tempered steel HB 500. l High closing force 27 kn / 5940 lbf at an operating pressure of 35 MPa / 5040 psi. l Accurate fittings eliminate tine distorsion, solid end stops (open & close). l Reinforced bolts, large bearing surface for bolts, specially coated solid steel bushings. l Robust, fully integrated rotation with sturdy slewing ring with internal hoses guarantees optimum force transmission and prevents hose break. The integrated pressure relief valve protects against overcharge. l Swivel and bevel sealed. Rotary feedthrough and motor accessible directly. Orange Peel Grabs P30VHD Heavy Duty Width E Opening Height C max. Volume Number Weight Load (closed) A (closed) of tines capacity (mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) P30VHD-600-4-F 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 4 1600 / 3520 7000 / 15400 P30VHD-600-4-H 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 4 1520 / 3344 7000 / 15400 P30VHD-600-4-W 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 4 1385 / 3047 7000 / 15400 P30VHD-600-4-T 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 4 1360 / 2992 7000 / 15400 P30VHD-600-5-F 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 5 1770 / 3894 7000 / 15400 P30VHD-600-5-H 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 5 1670 / 3674 7000 / 15400 P30VHD-600-5-W 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 5 1595 / 3509 7000 / 15400 P30VHD-600-5-T 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 5 1570 / 3454 7000 / 15400 P30VHD-800-5-F 1525 / 60.04 2290 / 90.16 2065 / 81.30 800 / 1.05 5 1750 / 3850 7000 / 15400 P30VHD-800-5-H 1525 / 60.04 2290 / 90.16 2065 / 81.30 800 / 1.05 5 1690 / 3718 7000 / 15400 P30VHD-800-5-W 1525 / 60.04 2290 / 90.16 2065 / 81.30 800 / 1.05 5 1560 / 3432 7000 / 15400 P30VHD-800-5-T 1525 / 60.04 2290 / 90.16 2065 / 81.30 800 / 1.05 5 1540 / 3388 7000 / 15400 Package consists of: orange peel grab, integrated rotation with sturdy slewing ring, head plate, hose guard, non-return valve and bolt-on bottom plate with welded lifting eye KM 501 RD50 KSW21/25 cardanic upper suspension without pendulum damper adapter for System L-Lock KMS21/KHS21 incl. cardan link up to 28t / 61600 lbs adapters for quick change systems from other manufacturers or different sizes available on request Operating pressure (open/close): max. 35 MPa (350 bar) / 5040 psi Recommended oil flow (open/close): 120 - max. 200 l/min / 31.70 - max. 52.84 GPM Hydraulic connection (Open/Close): 1 Operating pressure (rotation): max. 17 MPa (170 bar) / 2448 psi Recommended oil flow (rotation): 20 - max. 30 l/min / 5.28 - max. 7.93 GPM Hydraulic connection (Rotation): 1/2 T: Small W: Wide H: Half Closing F: Fully Closing
1 t 2 t 3 t... 14 t 15 t 16 t... 25 t 26 t 27 t 33 t 34 t... 38 t 39 t 40 t 41 t 42 t 43 t Orange Peel Grabs Heavy Duty with 3 Orange peel grab with 3 tines and 600 l / 0.78 c.y., 800 l / 1.05 c.y., 1000 l / 1.31 c.y., 1250 l / 1.64 c.y. or 1500 l / 1.96 c.y. volume for the handling of bulky scrap with excavators from 26t / 57200 lbs to 40t / 88000 lbs operating weight - for heavy duty tasks. l Available in two different volumes and diverse tine profiles (see technical drawings below). l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned. l Oil distributor with integrated non-return valve mounted directly underneath the rotator. l Oil distribution and hydraulic hoses are protected in the carrier. l Greasing points are easily accessible. l Reinforced tines made of wear-resistant steel HB 400. l Weld-on tips made of high resistant forged and tempered steel HB 500. l High closing force 38 kn / 8360 lbf at an operating pressure of 35 MPa / 5040 psi. l Accurate fittings eliminate tine distorsion, solid end stops (open & close). l Reinforced bolts, large bearing surface for bolts, specially coated solid steel bushings. l Robust, fully integrated rotation with sturdy slewing ring with internal hoses guarantees optimum force transmission and prevents hose break. The integrated pressure relief valve protects against overcharge. l Swivel and bevel sealed. Rotary feedthrough and motor accessible directly. Orange Peel Grabs P40VHD Heavy Duty P40VHD Width E Opening Height C max. Volume Number Weight Load (closed) A (closed) of tines capacity (mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) P40VHD-600-3-W 1420 / 55.91 2200 / 86.61 2170 / 85.43 600 / 0.78 3 1390 / 3058 6000 / 13200 P40VHD-800-3-W 1585 / 62.40 2200 / 86.61 2170 / 85.43 800 / 1.05 3 1430 / 3146 6000 / 13200 P40VHD-1000-3-W 1630 / 64.17 2440 / 96.06 2300 / 90.55 1000 / 1.31 3 1585 / 3487 6000 / 13200 P40VHD-1250-3-W 1830 / 72.05 2660 / 104.72 2415 / 95.08 1250 / 1.64 3 1660 / 3652 6000 / 13200 P40VHD-1500-3-W 1860 / 73.23 2835 / 111.61 2510 / 98.82 1500 / 1.96 3 2045 / 4499 6000 / 13200 Package consists of: orange peel grab, integrated rotation with sturdy slewing ring, head plate, hose guard, non-return valve and bolt-on bottom plate with welded lifting eye KM 501 RD50 KSW21/25 cardanic upper suspension without pendulum damper adapter for System L-Lock KMS21/25 / KHS21/25 incl. cardan link up to 40t / 88000 lbs adapters for quick change systems from other manufacturers or different sizes available on request Operating pressure (open/close): max. 35 MPa (350 bar) / 5040 psi Recommended oil flow (open/close): 120 - max. 200 l/min / 31.70 - max. 52.84 GPM Hydraulic connection (Open/Close): 1 Operating pressure (rotation): max. 17 MPa (170 bar) / 2448 psi Recommended oil flow (rotation): 20 - max. 30 l/min / 5.28 - max. 7.93 GPM Hydraulic connection (Rotation): 1/2 C max C min A E
1 t 2 t 3 t... 14 t 15 t 16 t... 25 t 26 t 27 t 33 t 34 t... 38 t 39 t 40 t 41 t 42 t 43 t P40VHD Orange Peel Grabs Heavy Duty with 4/5 Orange peel grab with 4 or 5 tines and 600 l / 0.78 c.y. or 800 l / 1.05 c.y. volume for the handling of bulky scrap with excavators from 26t / 57200 lbs to 40t / 88000 lbs operating weight - for heavy duty tasks. l Available in two different volumes and diverse tine profiles (see technical drawings below). l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned. l Oil distributor with integrated non-return valve mounted directly underneath the rotator. l Oil distribution and hydraulic hoses are protected in the carrier. l Greasing points are easily accessible. l Reinforced tines made of wear-resistant steel HB 400. l Weld-on tips made of high resistant forged and tempered steel HB 500. l High closing force 38 kn / 8360 lbf at an operating pressure of 35 MPa / 5040 psi. l Accurate fittings eliminate tine distorsion, solid end stops (open & close). l Reinforced bolts, large bearing surface for bolts, specially coated solid steel bushings. l Robust, fully integrated rotation with sturdy slewing ring with internal hoses guarantees optimum force transmission and prevents hose break. The integrated pressure relief valve protects against overcharge. l Swivel and bevel sealed. Rotary feedthrough and motor accessible directly. Orange Peel Grabs P40VHD Heavy Duty Width E Opening Height Volume Number Weight Load (closed) A C max. of tines capacity (mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) P40VHD-600-5-H 1430 / 56.30 2200 / 86.61 2170 / 85.43 600 / 0.78 5 1830 / 4026 10000 / 22000 P40VHD-600-5-W 1430 / 56.30 2200 / 86.61 2170 / 85.43 600 / 0.78 5 1780 / 3916 10000 / 22000 P40VHD-600-5-T 1430 / 56.30 2200 / 86.61 2170 / 85.43 600 / 0.78 5 1620 / 3564 10000 / 22000 P40VHD-800-4-W 1570 / 61.81 2200 / 86.61 2170 / 85.43 800 / 1.05 4 1670 / 3674 10000 / 22000 P40VHD-800-4-T 1570 / 61.81 2200 / 86.61 2170 / 85.43 800 / 1.05 4 1530 / 3366 10000 / 22000 P40VHD-800-5-F 1570 / 61.81 2200 / 86.61 2170 / 85.43 800 / 1.05 5 2035 / 4477 10000 / 22000 P40VHD-800-5-H 1570 / 61.81 2200 / 86.61 2170 / 85.43 800 / 1.05 5 1950 / 4290 10000 / 22000 P40VHD-800-5-W 1570 / 61.81 2200 / 86.61 2170 / 85.43 800 / 1.05 5 1940 / 4268 10000 / 22000 P40VHD-800-5-T 1570 / 61.81 2200 / 86.61 2170 / 85.43 800 / 1.05 5 1760 / 3872 10000 / 22000 Package consists of: orange peel grab, integrated rotation with sturdy slewing ring, head plate, hose guard, non-return valve and bolt-on bottom plate with welded lifting eye KM 501 RD50 KSW21/25 cardanic upper suspension without pendulum damper adapter for System L-Lock KMS21/25 / KHS21/25 incl. cardan link up to 40t / 88000 lbs adapters for quick change systems from other manufacturers or different sizes available on request Operating pressure (open/close): max. 35 MPa (350 bar) / 5040 psi Recommended oil flow (open/close): 120 - max. 200 l/min / 31.70 - max. 52.84 GPM Hydraulic connection (Open/Close): 1 Operating pressure (rotation): max. 17 MPa (170 bar) / 2448 psi Recommended oil flow (rotation): 20 - max. 30 l/min / 5.28 - max. 7.93 GPM Hydraulic connection (Rotation): 1/2 T: Small W: Wide H: Half Closing F: Fully Closing
1 t 2 t 3 t... 14 t 15 t... 25 t 26 t 27 t... 35 t 36 t 37 t... 47 t 48 t 49 t 50 t 51 t Orange Peel Grabs Heavy Duty with 4/5 Orange peel grab with 4 or 5 tines and 1000 l / 1.31 c.y., 1250 l / 1.64 c.y. or 1500 l / 1.96 c.y. volume for the handling of bulky scrap with excavators from 36t / 79200 lbs to 50t / 110000 lbs operating weight - for heavy duty tasks. l Available in two different volumes and diverse tine profiles (see technical drawings below). l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned. l Oil distributor with integrated non-return valve mounted directly underneath the rotator. l Oil distribution and hydraulic hoses are protected in the carrier. l Greasing points are easily accessible. l Reinforced tines made of wear-resistant steel HB 400. l Weld-on tips made of high resistant forged and tempered steel HB 500. l High closing force 33 kn / 7260 lbf at an operating pressure of 35 MPa / 5040 psi. l Accurate fittings eliminate tine distorsion, solid end stops (open & close). l Reinforced bolts, large bearing surface for bolts, specially coated solid steel bushings. l Robust, fully integrated rotation with sturdy slewing ring with internal hoses guarantees optimum force transmission and prevents hose break. The integrated pressure relief valve protects against overcharge. l Swivel and bevel sealed. Rotary feedthrough and motor accessible directly. P51VHD Orange Peel Grabs P51VHD Heavy Duty Width E Opening Height Volume Number Weight Load (closed) A C max. of tines capacity (mm/in) (mm/in) (mm/in) (litre/c.y.) (kg) (kg) P51VHD-1000-4-W 1630 / 64.17 2440 / 96.06 2200 / 86.61 1000 / 1.31 4 1755 / 3861 10000 / 22000 P51VHD-1000-4-T 1630 / 64.17 2440 / 96.06 2200 / 86.61 1000 / 1.31 4 1715 / 3773 10000 / 22000 P51VHD-1000-5-F 1630 / 64.17 2440 / 96.06 2200 / 86.61 1000 / 1.31 5 2165 / 4763 10000 / 22000 P51VHD-1000-5-H 1630 / 64.17 2440 / 96.06 2200 / 86.61 1000 / 1.31 5 2110 / 4642 10000 / 22000 P51VHD-1000-5-W 1630 / 64.17 2440 / 96.06 2200 / 86.61 1000 / 1.31 5 2050 / 4510 10000 / 22000 P51VHD-1000-5-T 1630 / 64.17 2440 / 96.06 2200 / 86.61 1000 / 1.31 5 1830 / 4026 10000 / 22000 P51VHD-1250-5-H 1835 / 72.24 2665 / 104.92 2415 / 95.08 1250 / 1.64 5 2195 / 4829 10000 / 22000 P51VHD-1250-5-W 1835 / 72.24 2665 / 104.92 2415 / 95.08 1250 / 1.64 5 2185 / 4807 10000 / 22000 P51VHD-1500-4-H 1870 / 73.62 2840 / 111.81 2500 / 98.43 1500 / 1.96 4 2000 / 4400 10000 / 22000 P51VHD-1500-4-W 1870 / 73.62 2840 / 111.81 2500 / 98.43 1500 / 1.96 4 1830 / 4026 10000 / 22000 P51VHD-1500-5-F 1870 / 73.62 2840 / 111.81 2500 / 98.43 1500 / 1.96 5 2360 / 5192 10000 / 22000 P51VHD-1500-5-H 1870 / 73.62 2840 / 111.81 2500 / 98.43 1500 / 1.96 5 2305 / 5071 10000 / 22000 P51VHD-1500-5-W 1870 / 73.62 2840 / 111.81 2500 / 98.43 1500 / 1.96 5 2245 / 4939 10000 / 22000 P51VHD-1500-5-T 1870 / 73.62 2840 / 111.81 2500 / 98.43 1500 / 1.96 5 1995 / 4389 10000 / 22000 Package consists of: orange peel grab, integrated rotation with sturdy slewing ring, head plate, hose guard, non-return valve and bolt-on bottom plate with welded lifting eye KM 501 RD50 upper suspension without pendulum damper adapters for quick change systems available on request Operating pressure (open/close): max. 35 MPa (350 bar) / 5040 psi Recommended oil flow (open/close): 120 - max. 200 l/min / 31.70 - max. 52.84 GPM Hydraulic connection (Open/Close): 1 Operating pressure (rotation): max. 17 MPa (170 bar) / 2448 psi Recommended oil flow (rotation): 20 - max. 30 l/min / 5.28 - max. 7.93 GPM Hydraulic connection (Rotation): 1/2 T: Small W: Wide H: Half Closing F: Fully Closing
1 t 2 t... 20 t... 30 t... 40 t... 50 t... 60 t... 70 t... 80 t... 90 t... 100 t P80VHD Orange Peel Grabs Heavy Duty with 4 or 5 Orange peel grab with 4 or 5 tines and 1500 l / 1.96 c.y., 2000 l / 2.62 c.y. or 3000 l / 3.92 c.y. volume for the handling of bulky scrap with excavators from 50t / 110000 lbs to 80t / 176000 lbs operating weight - for heavy duty tasks. l Available in three different volumes and with three tine profiles (see technical drawings below). l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned. l Oil distributor mounted underneath and integrated non-return valve directly above the rotation drive. l Oil distribution and hydraulic hoses are protected in the carrier. l Greasing points are easily accessible. l Reinforced tines made of wear resistant steel HB 400. l Weld-on tips made of high wear resistant steel HB 500. l High closing force 40 kn / 8800 lbf at an operating pressure of 35 MPa / 5040 psi. l Accurate fittings eliminate tine distorsion, solid end stops (open & close). l Reinforced bolts, large bearing surface for bolts, specially coated solid steel bushings. l Robust, fully integrated rotation with sturdy slewing ring with internal hoses guarantees optimum force transmission and prevents hose break. The integrated pressure relief valve protects against overcharge. l Swivel and bevel sealed. Rotary feedthrough and motor accessible directly. Orange Peel Grabs P80VHD Heavy Duty Width E Opening Height Volume Number Weight Load (closed) A C max. of capacity (mm/in) (mm/in) (mm/in) (litre/c.y.) tines (kg/lbs) (kg/lbs) P80VHD-1500-4-T 2010 / 79.1 2770 / 109.1 2770 / 109.1 1500 / 1.96 4 2500 / 5500 10000 / 22000 P80VHD-2000-5-H 2070 / 81.5 3180 / 125.2 2970 / 116.9 2000 / 2.62 5 3200 / 7040 10000 / 22000 P80VHD-2000-5-W 2070 / 81.5 3180 / 125.2 2970 / 116.9 2000 / 2.62 5 3000 / 6600 10000 / 22000 P80VHD-2000-5-T 2070 / 81.5 3180 / 125.2 2970 / 116.9 2000 / 2.62 5 2780 / 6116 10000 / 22000 P80VHD-2500-5-H 2200 / 86.6 3360 / 132.3 3065 / 120.7 2500 / 3.27 5 3310 / 7282 10000 / 22000 P80VHD-2500-5-W 2200 / 86.6 3360 / 132.3 3065 / 120.7 2500 / 3.27 5 3110 / 6482 10000 / 22000 P80VHD-2500-5-T 2200 / 86.6 3360 / 132.3 3065 / 120.7 2500 / 3.27 5 2890 / 6358 10000 / 22000 P80VHD-3000-5-H 2325 / 91.5 3540 / 139.4 3155 / 124.2 3000 / 3.92 5 3420 / 7524 10000 / 22000 P80VHD-3000-5-W 2325 / 91.5 3540 / 139.4 3155 / 124.2 3000 / 3.92 5 3220 / 7084 10000 / 22000 Package consists of: KM 501 RD120 orange peel grab, integrated rotation with sturdy slewing ring, head plate, hose guard, non-return valve and bolt-on bottom plate with welded lifting eye upper suspension without pendulum damper adapters for quick change systems from other manufacturers or different sizes available on request Operating pressure (open/close): Recommended oil flow (open/close): Operating pressure (rotation): Recommended oil flow (rotation): max. 35 MPa (350 bar) / 5040 psi max. 350 l/min / max. 92.47 GPM max. 20 MPa (200 bar) / 2880 psi 20 - max. 60 l/min / 5.28 - max. 15.85 GPM P80VHD-2000-5-T C max T: Small W: Wide H: Half Closing E A
... 70 t... 80 t... 90 t... 100 t... 110 t... 120 t... 130 t... 140 t... 150 t... 200 t Orange Peel Grabs Heavy Duty with 5 Orange peel grab with 5 tines and 2000 l / 2.6 c.y. or 3000 l / 3.9 c.y. volume for the handling of bulky scrap with excavators from 80t / 176000 lbs to 120t / 264000 lbs operating weight - for heavy duty tasks. l Available in two different volumes and three tine profiles (see technical drawings below). l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned. l Oil distributor with integrated non-return valve mounted directly underneath the rotator. l Oil distribution and hydraulic hoses are protected in the carrier. l Greasing points are easily accessible. l Reinforced tines made of wear-resistant steel HB 400. l Weld-on tips made of high resistant forged and tempered steel HB 500. l High closing forces of up to 61 kn / 13420 lbf at an operating pressure of 35 MPa / 5040 psi. l Accurate fittings eliminate tine distorsion, solid end stops (open & close). l Reinforced bolts, large bearing surface for bolts, specially coated solid steel bushings. l Robust, fully integrated rotation with sturdy slewing ring with internal hoses guarantees optimum force transmission and prevents hose break. The integrated pressure relief valve protects against overcharge. l Swivel and bevel sealed. Rotary feedthrough and motor accessible directly. P120VHD Orange Peel Grabs P120VHD Heavy Duty Width E Opening Height Volume Number Weight Load (closed) A C max. of tines capacity (mm/in) (mm/in) (mm/in) (litre/c.y.) (kg) (kg) P120VHD-2000-5-H 2280 / 89.76 3200 / 125.98 3180 / 125.20 2000 / 2.6 5 4570 / 10054 10000 / 22000 P120VHD-2000-5-W 2280 / 89.76 3200 / 125.98 3180 / 125.20 2000 / 2.6 5 4370 / 9614 10000 / 22000 P120VHD-2000-5-T 2280 / 89.76 3200 / 125.98 3180 / 125.20 2000 / 2.6 5 4220 / 9284 10000 / 22000 P120VHD-3000-5-H 2390 / 94.09 3910 / 153.94 3350 / 131.89 3000 / 3.9 5 4700 / 10340 10000 / 22000 P120VHD-3000-5-W 2390 / 94.09 3910 / 153.94 3350 / 131.89 3000 / 3.9 5 4500 / 9900 10000 / 22000 P120VHD-3000-5-T 2390 / 94.09 3910 / 153.94 3350 / 131.89 3000 / 3.9 5 4350 / 9570 10000 / 22000 Package consists of: orange peel grab, integrated rotation with sturdy slewing ring, head plate, hose guard, non-return valve KM 501 RD120 upper suspension without pendulum damper adapters for quick change systems available on request Operating pressure (open/close): Recommended oil flow (open/close): Operating pressure (rotation): Recommended oil flow (rotation): max. 35 MPa (350 bar) / 5040 psi 200-350 l/min / 52.84-92.47 GPM 14-25 MPa (140-250 bar) / 2016-3600 psi 20-50 l/min / 5.28-13.21 GPM P120VHD-2000-5-W C max T: Small W: Wide H: Half Closing E A
... 70 t... 80 t... 90 t... 100 t... 110 t... 120 t... 130 t... 140 t... 150 t... 200 t P200VHD Orange Peel Grabs Heavy Duty with 6 Orange peel grab with 6 tines and 5000 l / 6.55 c.y. volume for the handling of bulky scrap with re-handling excavators from 120t / 264000 lbs to 200t / 440000 lbs operating weight - for heavy duty tasks. l Available with three different tine profiles (narrow or wide tines or half closing, see drawing). l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned. l Oil distributor mounted underneath and integrated non-return valve directly above the rotation drive. l Oil distribution and hydraulic hoses are protected in the carrier. l Greasing points are easily accessible. l Reinforced tines made of wear resistant steel HB 400. l Weld-on tips made of high wear resistant steel HB 500. l High closing force of 81 kn / 17820 lbf at an operating pressure of 35 MPa / 5040 psi. l Accurate fittings eliminate tine distorsion, solid end stops (open & close). l Reinforced bolts, large bearing surface for bolts, specially coated solid steel bushings. l Robust, fully integrated rotation with sturdy slewing ring with internal hoses guarantees optimum force transmission and prevents hose break. The integrated pressure relief valve protects against overcharge. l Swivel and bevel sealed. Rotary feedthrough and motor accessible directly. Orange Peel Grabs P200VHD Heavy Duty Width E Opening Height Volume Number Weight Load (closed) A C max. of capacity (mm/in) (mm/in) (mm/in) (litre/c.y.) tines (kg/lbs) (kg/lbs) P200VHD-5000-6-H 2810 / 110.6 4280 / 171.2 3710 / 146.1 5000 / 6.55 6 6800 / 14960 15000 / 33000 P200VHD-5000-6-W 2810 / 110.6 4280 / 171.2 3710 / 146.1 5000 / 6.55 6 6500 / 14300 15000 / 33000 P200VHD-5000-6-T 2810 / 110.6 4280 / 171.2 3710 / 146.1 5000 / 6.55 6 6400 / 14080 15000 / 33000 Package consists of: orange peel grab, integrated rotation with sturdy slewing ring, head plate, hose guard, non-return valve KM 501 RD120 upper suspension without pendulum damper Operating pressure (open/close): Recommended oil flow (open/close): Operating pressure (rotation): Recommended oil flow (rotation): max. 35 MPa (350 bar) / 5040 psi max. 400 l/min / max. 105.68 GPM 14-20 MPa (140-200 bar) / 2016-2880 psi 20-60 l/min / 5.28-15.85 GPM P200VHD-5000-6-H C max T: Small W: Wide H: Half Closing E A
AT A GLANCE ROTATION Robust, fully integrated rotation With sturdy slewing ring and internal hoses against hose break Optimum force transmission Integrated pressure relief valve against overcharge Swivel and bevel sealed; rotary feedthrough and motor accessible directly HYDRAULICS Maximum operating pressure 350 bar Hydraulic cylinders cushioned for protection against impact loads. Non-return valve prevents from unintended pressure drop Piston rod protection encloses piston rod and thus avoids damages Use of high pressure hoses, hence even highest pressures caused by impacts can be absorbed BEARING Generously sized pin connections reduce face pressure Induction hardened pins are seated in steel bushings Tine heads and main bearing are widely spaced in order to absorb distortion as well as to reduce the face pressure in the bushings Lateral thrust discs provide a solid support for the tines and reduce wear to a minimum TINE Slim, outline optimised tine guarantees an ideal penetration No protruding parts, ensures perfect discharging of the goods Massive end stops relieve the hydraulics in tine s extreme positions Due to ideal tine outline, no materials get caught up, which potentially could damage the cylinder Forged tips of tines 500 HB WEIGHT / PERFORMANCE RATIO All components are stress and weight optimised with FEM: meaning 10% weight reduction at 20% stress reduction Use of high strength fine grained steel All wear plates made of highly wear resistant steel 400 HB MAIN CARRIER Enveloping design of main carrier protects hydraulic cylinders as well as hydraulic hoses 100% Good access to hoses and oil distributor due to easily removable covers Mounting of radiation detector or magnet possible
for Cardanic Mounting of Grabs KM 501 Upper Suspensions without Pendulum Damper When ordering please specify excavator model Upper Operating weight For rotator type connection of excavator (width x pin-ø) (t/lbs) (mm/in) KM 501 1t-8t 1-8 / 2200-17600 KM 04 F / KM 04 F140-30V / KM 04 F140-30US 84x30 / 3.31x1.18 KM 501 6t-12t 6-12 / 13200-26400 KM 06 F140-40 / KM 07 F180-40 84x40 / 3.31x1.57 KM 501 9t-12t 9-12 / 19800-26400 KM 10 F275-50 110x50 / 4.33x1.97 KM 501 13t-25t 13-25 / 28600-55000 KM 10 F275-60 125x60 / 4.92x2.36 KM 501 19t-60t 19-60 / 41800-132000 KM 15 F340-70 / KM 15 F273-70 / rotation C80H 180x70 / 7.09x2.76 KM 501 RD50 19-60 / 41800-132000 rotation C40/C60H & VHD / P30/40/51VHD / T30/T40VHD 225x70 / 8.86x2.76 KM 501 RD120 50-100 / 110000-220000 rotation P80VHD / T80/T100VHD 325x100 /12.80x3.95 KM 511 Upper Suspensions with Pendulum Damper (can be retrofitted) When ordering please specify excavator model Upper Operating weight For rotator type connection of excavator (width x pin-ø) (t/lbs) (mm/in) KM 511 1t-8t 1-8 / 2200-17600 KM 04 F / KM 04 F140-30V / KM 04 F140-30US 84x30 / 3.31x1.18 KM 511 6t-12t 6-12 / 13200-26400 KM 06 F140-40 / KM 07 F180-40 84x40 / 3.31x1.57 KM 511 9t-12t 9-12 / 19800-26400 KM 10 F275-50 110x50 / 4.33x1.97 KM 511 13t-25t 13-25 / 28600-55000 KM 10 F275-60 125x60 / 4.92x2.36 KM 511 19t-60t 19-60 / 41800-132000 KM 15 F340-70 / KM 15 F273-70 / rotation C80H 180x70 / 7.09x2.76 KSW cardanic Adapter for System L-Lock Grab Exchange System for Cardanic Mounting (incl. cardan link) Suitable for quick coupler Operating weight System L-Lock of excavator (t/lbs) KSW01 cardanic KMS01/KHS01 up to 2 / 4400 KSW03 cardanic KMS03/KHS03 up to 6 / 13200 KSW08 cardanic KMS08/KHS08 up to 12 / 26400 KSW10 cardanic KMS10/KHS10 up to 19 / 41800 KSW21/25 cardanic KMS21/KHS21 / KMS25/KHS25 up to 40 / 88000 Please note: adapters for quick change systems from other manufacturers or different sizes available on request Grab with cardanic suspension Grab with cardanic suspension and quick exchange system
for Rigid Mounting of Grabs KM 690 Adapter for Rigid Mounting Operating weight of excavator (t/lbs) KM 690 2t up to 2 / 4400 KM 690 8t up to 8 / 17600 KM 690 15t up to 15 / 33000 KM 690 20t up to 20 / 44000 KM 690 27t up to 27 / 59400 KM 690 32t up to 32 / 70400 KM 690 40t up to 40 / 88000 KM 690 50t up to 50 / 110000 KM 690 70t up to 70 / 154000 KM 691 Adapter for Specific Solutions KSW rigid Adapter for System L-Lock Grab Exchange System Operating weight of excavator (t/lbs) KM 691 2t up to 2 / 4400 KM 691 8t up to 8 / 17600 KM 691 15t up to 15 / 33000 KM 691 20t up to 20 / 44000 KM 691 27t up to 27 / 59400 suitable for Operating weight System L-Lock of excavator (t/lbs) KSW01 rigid KMS01/KHS01 up to 2 / 4400 KSW03 rigid KMS03/KHS03 up to 6 / 13200 KSW08 rigid KMS08/KHS08 up to 12 / 26400 KSW10 rigid KMS10/KHS10 up to 19 / 41800 KSW21/25 rigid KMS21/KHS21 / KMS25/KHS25 up to 40 / 88000 Please note: adapters for quick change systems from other manufacturers or different sizes available on request OQ Bolt-on Adapter for Oilquick Grab Exchange System Suitable for quick coupler Operating weight Oilquick quick change system of excavator (t/lbs) OQ45 OQ45 5 12 / 11000-26400 OQ60 OQ60 12 18 / 26400-39600 OQ65 OQ65 14 22 / 30800-48400 OQ70 OQ70 15 28 / 33000-61600 OQ70/55 OQ70/55 18 28 / 39600-61600 OQ80 OQ80 45 70 / 99000-154000 Note: Adapters for quick-exchange-systems from other manufacturers also available Grab with adapter for rigid mounting Grab with adapter for quick exchange system
INFO & CONTACT The KINSHOFER orange peel grabs are the result of many year of experience, research, development and testing in collaboration with our subsidiaries and clients. Throughout the years, the orange peel grabs have been further developed and improved, until today s version had finally been ready for many the best orange peel grab range on the market! The P-series orange peel grabs are available with three, four or five tines, depending on type and version, and in four different tine profiles for a perfect fit to your task: Fully closing tines (F) Half closing tines (H) Wide tines (W) Small tines (T) Oil distribution and hydraulic hoses are protected in the center section. The hydraulic cylinders are fitted with replaceable piston rod protections and are hydraulically cushioned. Wide opening ranges guarantee a good penetration and release behavior. There is also a rigid mount version (P25VR HD) available with three tines for excavators with up to 25t operating weight, that has been developed especially for heavy duty task. Nederland: DEMAREC Demolition and Recycling Equipment B.V. De Hork 32 NL-5431 NS Cuijk Tel.: +31 (0) 485 442300 Fax: +31 (0) 485 442120 info@demarec.com www.demarec.com Sverige: RF System AB Furutorpsgatan 6 SE-288 34 Vinslöv Tel.: +46 (0) 44 817 07 Fax: +46 (0) 44 859 63 Email: info@rf-system.se www.rf-system.se United Kingdom: Auger Torque Europe Limited Hazleton Cheltenham, GL54 4DX Tel.: +44 (0) 1451 861 652 Fax: +44 (0) 1451 861 660 Email: sales@augertorque.com www.augertorque.com Australia: Auger Torque Australia Pty Ltd. 122 Boundary Road, Rocklea Queensland 4106 Tel.: +61 (0) 7 3274 2077 Fax: +61 (0) 7 3274 5077 Email: sales@augertorque.com.au www.augertorque.com.au 中国 : Auger Torque China CO., Ltd. Baozhan Rd, Tongyi Industry Zone Dongwu, Yinzhou, Ningbo China 315114 Tel.: + 86 (0) 574 8848 8181 Fax: + 86 (0) 574 8848 8687 Email: john.hu@attachmenttorque.com www.augertorque.com United States of America: Solesbee s Equipment & Attachments, LLC 2640 Jason Industrial Parkway Winston, GA 30187 Toll Free (North America): 1-800-419-8090 Email: sales@solesbees.com www.solesbees.com Hauptsitz Deutschland: Kinshofer GmbH Hauptstrasse 76 83666 Waakirchen Tel.: +49 (0) 8021 88 99 0 Fax: +49 (0) 8021 88 99 37 Email: info@kinshofer.com www.kinshofer.com United Kingdom: Kinshofer UK Ltd. 4 Milton Industrial Court Horsfield Way, Bredbury Stockport, Cheshire, SK6 2TA Tel.: +44 (0) 161 406 7046 Fax: +44 (0) 161 406 7014 Email: sales-uk@kinshofer.com www.kinshofer.com France: Kinshofer France S.A.R.L. 8 Bis, rue Gabriel Voisin, CS 40003 F-51688 Reims Cedex 2 Tel.: +33 (0) 3 88 39 55 00 Fax: +33 (0) 3 88 79 06 75 Email: sales-france@kinshofer.com www.kinshofer.com EXA-P-Grabs-E-0118 Canada: Kinshofer North America 5040 Mainway Drive, Unit #11 Burlington, ON L7L 7G5 Tel.: +1 (905) 335-2856 Fax: +1 (905) 335-4529 Toll Free (North America): 1-800-268-9525 Email: sales-northamerica@kinshofer.com www.kinshofer.com United States of America: Kinshofer USA 6420 Inducon Drive Suite G Sanborn, NY, 14132 Tel.: +1 (716) 731-4333 Toll Free (North America): 1-800-268-9525 Email: sales-usa@kinshofer.com www.kinshofer.com New Zealand: Doherty Couplers & Attachments PO Box 9339, Greerton Tauranga 3142 Tel.: +64 7 574 3000 Fax: +64 7 574 8030 Email: sales@dohertydirect.net www.dohertydirect.net www.kinshofer.com KINSHOFER is an ISO 9001 certified Company. DVS ZERT is a registred trademark of DVS ZERT e.v., Düsseldorf. 16