Scooptram ST2D Underground diesel loader with 3.6 tonne load capacity 1
Hardened loader For small and narrow vein mines A parallel boom design matched to an aggressive bucket configuration provides efficient mucking operations. Three point mounting and anti-skid protection Long life roller bearing center articulation provides safe access for operators and joint provides durable in use. service personnel. The Scooptram ST2D is a reliable loader with simple and strong structure for smaller sized operations that range from narrow vein mines to construction sites. The Scooptram ST2D has benefits from focused on safety, durability and comfort. The worldwide application in a long run of the Scooptram ST2D has been proved great reputation bucket by bucket. ISO ROPS/FOPS approved operator s canopy Side seated operator position for efficient bi-directional operation with wide and clear visibility Boom up lock device Three point mounting and anti-skip protection for safe access for operator and service personnel Main benefits High safety level thanks to features such as ISO ROPS/FOPS approved operator s canopy, boom up lock device, wheel chocks, audio-visual reverse alarm, emergency stop buttons, 3-point contact and anti-skid protection to safe access of operators & service personnel. Conventional and proven components are well protected within the frame Audio-visual reverse alarm provides safety in the work environment Durability thanks to strong frame structure and long life roller bearing center articulation joint with a parallel boom design matching to an aggressive bucket configuration which provides for quick and efficient mucking. Comfort thanks to ergonomic operator seat with seat belt for comfort during a full operating shift. Ergonomic operator seat with seat belt High ground clearance protects the machine from damage 2 3
Technical Specifications = Standard = Option Stable structure for long term durability The Scooptram ST2D is designed with strong and longlife structure to provide shorter machine downtime. We actively look for your feedback and take actions on improvement. Specifications Capacities Tamming capacity* Breakout force, hydraulic Breakout force, mechanical 3 600 kg 9 060 kg 6 550 kg Hydraulic system Heavy duty gear type pumps System pressure: 11.4 MPa Hydraulic tank capacity 144 litres Filtration, suction line: 50 μm *Tramming capacity with EOD bucket 3 200 kg. Manual hydraulic tank fill pump Motion times Steer cylinder: chrome plated stem, 1 125 mm diameter Boom raising 3.7 sec Hoist cylinder: chrome plated stem, 1 180 mm diameter Boom lowering 3.7 sec Dump cylinder: chrome plated stem, 1 180 mm diameter + Safety The Scooptram ST2D is designed to keep a high level of safety. A new designed ISO ROPS/FOPS approved canopy provides safe operation. It can also be installed with Ausal fire suppression system. Dumping Weights (Standard empty vehicle) Approximate weight Axle load, front end Axle load, rear end 4.0 sec 12 840 kg 5 800 kg 7 040 kg Control system Engine data display Audio-visual reverse alarm Monostick steering control Engine Daul lever dump and hoist control Low hydraulic oil level warning + Versatility The Scooptram ST2D is compatible for spring applied hydraulic released (SAHR) brake system, LED lights improves operators' visibility in underground mines. New instrument panel gauge cluster makes operator easily understand the status of machine. Brand/model: Deutz Deutz TCD3.6L4, EPA Tier 3/EU Stage IIIA/ CHINA III Power rating at 2 300 rpm 74.4 kw / 100 hp Standard: Water cooling, turbo charge, exhaust silencer Fuel Fuel tank capacity: 126 litres Fuel filtration, primary, including water trap: 6 μm Blockout 3rd and 4th gears Blockout 4th Gear Electrical system System voltage: start & accessories, 24 V Mine duty high output alternator: 100 Amps Isolating switch lockout Emergency stop Fuel filtration, secondary: 3 μm Driving lights LED: 4 1 800 lumen, 22 W Transmission Main frame + Comfort Side seated operator position for efficient bi-directional operation ensures wide visibility. Ergonomic operator seat with seat belt provides comfort during a full work shift. Modulated power shift, with 4 speeds forward and reverse Brand/model: Dana, R32000 Series Axles Brand/model: Dana, 14D Degree of rear axle oscillation: 16 (8 on each side) Differentials: Front, No spin Differentials: Rear, Standard KA certificate Center hinge and boom up lock device EOD bucket Wheel chocks and chocks brackets Knockdown construction Certral manual lubrication Automatic lubrication system with timer Anti-corrosion cooler Handheld fire extinguisher Ansul manually activated fire suppression system with engine shut down A comprehensive service offering Even the best equipment needs to be serviced regularly to make sure it sustains peak performance. An Epiroc service solution offers peace of mind, maximizing availability and performance throughout the lifetime of your equipment. We focus on safety, productivity and reliability. Brakes Hydraulically applied spring released; fully enclosed wet discs at each wheel end Parking and emergency: spring applied, hydraulically released, multiple wet discs, built into transmission Service brake: LCB Service/parking/emergency brakes: SAHR Tyers Tube tyres design for underground mine service* Tyre size front and rear: 12.00 R24 (slicks) Tyre size front and rear: 12.00 R24 (treaded) * As applications and conditions vary, Epiroc recommends that the user consults with tyre suppliers to obtain the optimum tyre selection. Operator's compartment Ansul checkfire automatically activated fire suppression system Dump cylinder rod protector Norilsk compliant BOM - ST2DR (Duetz engine F6L912W) Parts and services Preventive maintenance kits Repair and rebuild kits Upgrade kits Operator training Documentation Operator, service and spare parts manual on CD and hard copy Parts manual - Plasticized Service manual - Plasticized By combining genuine parts and an Epiroc service from our certified technicians, we safeguard your productivity wherever you are. Canopy (ISO ROPS and FOPS approved) Side seated operator for bi-directional operation and maximum visibility Ergonomic operator seat with seat belt External sound level according to ISO 6393 LwA 111.4 db(a) Sound level in canopy according to ISO 6394 LpA 98.7 db(a) Whole body vibration value 0.15-0.65 m/s² according to EN 14253 and ISO 2631-1 4 5
Technical specifications Technical specifications Grade performance Standard configuration, empty bucket % Grade 0.0 2.0 4.0 6.0 8.3 10.0 12.5 14.3 16.0 18.0 20.0 25.0 Side view 1 554 2 058 Ratio Grade 1:12 1:10 1:8 1:7 1:5 1:4 624 1st gear 3.4 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.8 km/h 2nd gear 6.8 6.6 6.4 6.2 6.0 5.8 5.5 5.3 5.1 5.0 4.6 3.6 3rd gear 11.3 10.6 10.3 9.8 9.2 8.2 6.9 5.7 5.3 4th gear 16.2 15.1 13.1 11.3 3% rolling resistance assumed. Actual performance may vary depending on the application. Grade performance Standard configuration, loaded bucket % Grade 0.0 2.0 4.0 6.0 8.3 10.0 12.5 14.3 16.0 18.0 20.0 25.0 40 3 600±100 3 724(H1) Ratio Grade 1:12 1:10 1:8 1:7 1:5 1:4 1st gear 3.3 3.2 3.1 3.0 2.9 2.9 2.8 2.8 2.7 2.6 2.5 2.5 2nd gear 6.7 6.4 6.2 5.9 5.6 5.4 4.9 4.5 4.2 3.8 3.4 km/h 3rd gear 11.0 10.2 9.7 8.6 7.0 6.0 4th gear 15.0 13.3 10.1 3% rolling resistance assumed. Actual performance may vary depending on the application. Measurements 2 112±70 1 652 612 16 2 170 1 270 210 7 003±70 1 270 917(L1) 1 321 1 554 2 293(T1) 2 598 2 700 Turning radius Dimensions All dimensions shown are based on standard vehicle configuration with 25 mm tyre deflection, unloaded All dimensions are shown in millimetres Top view 38 ±2 2 912 2 240 3 020 1 716 1 663(W) 1 740±70 240 445 1 484(H2) 1 520(T2) 2 328 Bucket Data STANDARD EOD R2 870 R4 827 STD Volume, nominal heaped (m³) 1.3 1.5 1.7 1.9 2.1 1.1 1.5 1.8 1.9 R5 200 Maximum material density (t/m³) 2.8 2.4 2.1 2.0 1.7 3.3 2.4 2.1 2.0 Width, bucket (mm) W 1 663 1 663 1 663 1 663 1 663 1 666 1 549 1 662 1 662 Tramming position: Axle centerline to bucket lip (mm) T1 2 106 2 229 2 254 2 293 2 414 2 301 2 279 2 370 2 420 Tramming position: Ground to bucket lip (mm) T2 1 274 1 315 1 368 1 520 1 372 1 532 1 531 1 534 1 534 2 912 Reach dimension (mm) L1 726 751 802 917 900 1 041 1 070 1 088 1 151 3 020 2 240 2 000X45 Raised position: Back height, max. (mm) H1 3 470 3 586 3 669 3 724 3 816 3 635 3 743 3 775 3 902 Raised position: Bucket tip, height (mm) H2 1 615 1 546 1 518 1 484 1 386 1 465 1 518 1 446 1 461 6 7
9869 0019 01 2018-04 Nanjing, China. Legal Notice Copyright 2017, Epiroc (Nanjing) Mining & Construction Equipment Ltd., Nanjing, China. All product names in this publication are trademarks of Epiroc. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Epiroc Customer Center for specific information. United in performance. Inspired by innovation. Performance unites us, innovation inspires us, and commitment drives us to keep moving forward. Count on Epiroc to deliver the solutions you need to succeed today and the technology to lead tomorrow. epiroc.com