PM10 10inch 2Way Main/Monitor Features Compact light weight Design HeavyDuty 10 Woofer 1inch exit (1.5 VC) HF driver Durable Water Resistant Enclosure Application The PM10 is designed to stand alone as a full range sound reinforcement loudspeaker for small systems. The PM10 can be laid on it s side for a 60 degree angled stage monitor. Coupling the PM10 with an LS1501 15 subwoofer results in an ideal three way system with extended low end. Effective for both portable and permanent applications, featuring a 13/8 pole mount cup. Applications include: DJ system House of Worship Band PA Satellite system Description The PM10 incorporates premium components housed in a rugged water resistant enclosure, designed for crystal clear sound in small to medium size venues. The high power drivers feature large magnet structures for high efficiency producing more output per watt than systems costing two to three times more. The woofer is protected by a heavy gauge steel powder coated grill. Two combination Speakon ¼ input jacks allow for versatile connections and chaining of speakers. Rubber foot pads on the bottom interlock with receptacles on the top for stacking two PM10 s. The bottom pole mount cup offers universal mounting to pole stands and mounts. TITANIUM HF Specifications PM10 System Type: 10inch 2Way, bassreflex Frequency Response: 60 Hz 18 khz (10DB) 75 Hz 17 khz (3 db) Coverage Pattern: 90H x 45V Crossover: 2Way Crossover Frequency: 3 khz Power: Continuous / Program / Peak Full Range 250w / 500w / 1000w Recommended Amplifier Power: 100w 400w Sensitivity (1w @ 1m): 96.5dB Maximum SPL: 120dB / 126dB peak LF Driver: 10inch Woofer HF Driver: 1inch exit 1.5inch VC Titanium Driver Nominal Impedance full range: 8 ohms Enclosure: Molded High Impact Plastic Suspension/Mounting: 13/8inch pole mount cup with clamp Transport: 1 side handle Grill: Steel Connectors: 2 combo Speakon 1/4 inch jacks Dimensions (H x W x D): 546 mm x 330 mm x 279 mm 21.5 in x 13 in x 11.0 in Net Wt: 12 kg (26 lb) Optional Accessories: CVL10 cover SS20 adjustable floor stand SS10 wall mount LS1501 sub with SS4 adj. pole SS5 dual pole mount 10 WOOFER 12340 WORLD TRADE DRIVE SAN DIEGO, CA USA 92128 CARVIN.COM (USA) CARVINWORLD.COM
PM10 Frequency Response Rear Panel Block Diagram in Full Range Mode 1 1 HIGH PASS SPEAKER GUARD HORN Neutrik 1/4inch Speakon Combo 1 1 LOW PASS LOW PM10 Dimensions With LS1501 subwoofer and pole mount
PM12 & PM12A 12inch 2Way Main / Monitor Features Compact light weight design HeavyDuty 12 Woofer Titanium 1inch exit (1.5 VC) HF driver Rear 30 angled design for floor monitoring Water Resistant Polypropylene Enclosure Application The PM12 is designed to stand alone as a full range sound reinforcement loudspeaker, to lay down for a full range monitor, or to couple with our LSx1801 for a three way extended lowend system. Designed for both permanent and portable applications, it comes with 4 fly points, rubber footpads, and a 13/8inch pole mount cup. Applications include: Club System House of Worship Auditoriums Band PA Satellite system Description The PM12 incorporates premium components housed in a rugged water resistant enclosure, designed for crystal clear sound in small to medium size venues. The high power drivers feature large magnet structures for high efficiency producing more output per watt. The enclosure is made of molded virgin polypropylene that won t chip or crack. The woofer is protected by a heavy gauge steel powder coated grill. Carvin s HF driver protection uses a self leveling PTC thermistor circuit to protect the HF driver from excessive power. The circuit resets as soon as the high frequency content is back to normal levels. Two combination Speakon ¼ input jacks allow for versatile connections and chaining of speakers. Rubber foot pads on the bottom interlock with receptacles on the top for stacking two PM12 s. The bottom pole mount cup offers universal mounting to pole stands or SS10 wall mounts. For installations, 4 fly points allow the PM12 to be hung or use the optional LMUB brackets. Specifications PM12 System Type: 12inch 2Way, bassreflex Frequency Response: 50 Hz 18 khz (10DB) 60 Hz 17 khz (3 db) Coverage Pattern: 90 H x 30 V(up) x 45 V(down) Crossover: 2Way with HF protection Crossover Frequency: 2.5 k Hz Power: Continuous / Program / Peak Full Range 300w /600w /1200w Recommended Amplifier Power: 300 600w Sensitivity (1w @ 1m): 98dB Maximum SPL: 122dB / 128dB peak LF Driver: 12inch Woofer HF Driver: 1inch exit 1.5inch VC Titanium Driver Nominal Impedance full range: 8 ohms Enclosure: Virgin Polypropylene Suspension/Mounting: 13/8inch pole mount cup 4 Fly Points Transport: 2 Handles Grill: Black steel Connectors: Two Neutrik Combo 1/4inch / Speakon s Dimensions (H x W x D): 585 mm x 395 mm x 300 mm 24.375 in x 16 in x 13.125 in Net Wt: 12.7 kg (28 lb) Optional Accessories: CVL12 cover SS20 adjustable floor stand SS10 wall mount bracket LS1801 sub with SS4 adj. pole SS5 dual pole mount LMUB suspension U bracket 12340 WORLD TRADE DRIVE SAN DIEGO, CA USA 92128 CARVIN.COM (USA) CARVINWORLD.COM
Frequency Response PM12 Rear Plate Passive Block Diagram in Full Range Mode 1 1 HIGH PASS SPEAKER GUARD HORN Neutrik 1/4inch Speakon Combo 1 1 LOW PASS LOW Active PM12A Description The PM12A incorporates powerful ClassD amplifier technology powered by an efficient switchmode power supply. The PM12A model also features a 3 Band EQ with Midsweep for final room adjustments, 3 channels with individual level controls, internal active multiband limiters for LF and HF driver protection, and an 18db/octave low cut filter for a smooth lowend optimized to the enclosure. The input XLR can take in line levels or be switched to mic levels for direct microphone input. The output XLR parallel the input XLR for daisy chaining or it can output the mix of all three channels. PM12A Rear Plate Specifications PM12A System Type: Speaker Protection: Crossover Frequency: Maximum SPL: Internal Amplifier full range: Connectors: AC Power Requirement: Net Wt: Internal Active system Active HF & LF Limiter 2.5 k Hz 124dB peak 400Watts Two XLR s one Male, one Female Two 1/4 TRS phone jacks Two RCA jacks 90250VAC 5060Hz 13 kg (29 lb) Suspension with LMUB Bracket PM12A 400Watt
PM15 & PM15A 15inch 2Way Main / Monitor Features Compact light weight design HeavyDuty 15 Woofer Titanium 1inch exit (1.5 VC) HF driver Rear 30 angled design for floor monitoring Water Resistant Polypropylene Enclosure Application The PM15 is designed to stand alone as a full range sound reinforcement loudspeaker, to lay down for a full range monitor, or to couple with our LSx1801 for a three way extended lowend system. Designed for both permanent and portable applications, it comes with 4 fly points, rubber footpads, and a 13/8inch pole mount cup. Applications include: Club System House of Worship Auditoriums Band PA Satellite system Description The PM15 incorporates premium components housed in a rugged water resistant enclosure, designed for crystal clear sound in small to medium size venues. The high power drivers feature large magnet structures for high efficiency producing more output per watt. The enclosure is made of molded virgin polypropylene that won t chip or crack. The woofer is protected by a heavy gauge steel powder coated grill. Carvin s HF driver protection uses a self leveling PTC thermistor circuit to protect the HF driver from excessive power. The circuit resets as soon as the high frequency content is back to normal levels. Two combination Speakon ¼ input jacks allow for versatile connections and chaining of speakers. Rubber foot pads on the bottom interlock with receptacles on the top for stacking two PM15 s. The bottom pole mount cup offers universal mounting to pole stands or SS10 wall mounts. For installations, 4 fly points allow the PM15 to be hung or use the optional LMUB brackets. Specifications PM15 System Type: 15inch 2Way, bassreflex Frequency Response: 47 Hz 18 khz (10DB) 58 Hz 17 khz (3 db) Coverage Pattern: 90 H x 30 V(up) x 45 V(down) Crossover: 2Way with HF protection Crossover Frequency: 2.5 k Hz Power: Continuous / Program / Peak Full Range 400w /800w /1600w Recommended Amplifier Power: 400 800w Sensitivity (1w @ 1m): 99dB Maximum SPL: 125dB / 131dB peak LF Driver: 15inch Woofer HF Driver: 1inch exit 1.5inch VC Titanium Driver Nominal Impedance full range: 8 ohms Enclosure: Virgin Polypropylene Suspension/Mounting: 13/8inch pole mount cup 4 Fly Points Transport: 2 Handles Grill: Black steel Connectors: Two Neutrik Combo 1/4inch / Speakon s Dimensions (H x W x D): 710 mm x 454 mm x 300 mm 27.875 in x 17.875 in x 13.125 in Net Wt: 16 kg (35.4 lb) Optional Accessories: CVL15 cover SS20 adjustable floor stand SS10 wall mount bracket LS1801 sub with SS4 adj. pole SS5 dual pole mount LMUB suspension U bracket 12340 WORLD TRADE DRIVE SAN DIEGO, CA USA 92128 CARVIN.COM (USA) CARVINWORLD.COM
Frequency Response PM15 Rear Plate Passive Block Diagram in Full Range Mode 1 1 HIGH PASS SPEAKER GUARD HORN Neutrik 1/4inch Speakon Combo 1 1 LOW PASS LOW Active PM15A Description The PM15A incorporates powerful ClassD amplifier technology powered by an efficient switchmode power supply. The PM15A model also features a 3 Band EQ with Midsweep for final room adjustments, 3 channels with individual level controls, internal active multiband limiters for LF and HF driver protection, and an 18db/octave low cut filter for a smooth lowend optimized to the enclosure. The input XLR can take in line levels or be switched to mic levels for direct microphone input. The output XLR parallel the input XLR for daisy chaining or it can output the mix of all three channels. PM15A Rear Plate Specifications PM15A System Type: Speaker Protection: Crossover Frequency: Maximum SPL: Internal Amplifier full range: Connectors: AC Power Requirement: Net Wt: Internal Active system Active HF & LF Limiter 2.5 k Hz 122dB / 128dB peak 400Watts Two XLR s one Male, one Female Two 1/4 TRS phone jacks Two RCA jacks 90250VAC 5060Hz 18.1 kg (40 lb) Suspension with LMUB Bracket PM15A 400Watt
PM153 15inch 3Way Main / Monitor Features Compact light weight 3way Design HeavyDuty 15inch Woofer 6inch midrange Woofer 1inch exit (1.5 VC) HF driver Monitor cuts on both back corners Water Resistant Polypropylene Enclosure Application The PM153 is designed to stand alone as a full range sound reinforcement loudspeaker, to lay down for a full range monitor, or to couple with our 18Inch sub for a three way with extended lowend system. Effective for both permanent and portable applications, it comes with 4 fly points, rubber footpads, and a 13/8inch pole mount cup. Applications include: Club System House of Worship Band PA Satellite system Description The PM153 incorporates premium components housed in a rugged, water resistant polypropylene enclosure making this is the most advanced system on the market today. The high power drivers feature large magnet structures for high efficiency producing more output per watt. Designed for medium size venues, the audience will hear crystal clear sound. The enclosure is made of molded virgin polypropylene it won t chip or crack and can withstand our drop tested at 3M (12.5 ft). The front is covered by a heavy gauge steel powder coated grill. The crossover includes two of Neutrik s combo Speakon and ¼ phone connectors mounted on FR4 double sided circuit boards for solid construction and durability. Carvin s exclusive Speaker Guard HF Driver protection uses a self resetting relay circuit to dim the HF driver 10 db protecting the voice coil from excessive power. The benefits are the driver is not turned off losing all the high frequencies, the circuit resets as soon as the high frequency content is back to normal levels. Specifications PM153 System Type: 15inch 3Way, bassreflex Frequency Response: 50 Hz 18 khz (10DB) 58 Hz 17 khz (3 db) Coverage Pattern: 90H x 45V Crossover: Speaker Guard HF protection Crossover Frequency: 400Hz, 3.5 k Hz Power: Continuous / Program / Peak Full Range 400w /800w /1600 Recommended Amplifier Power: 300 1200w Sensitivity (1w @ 1m): 96dB Maximum SPL: 122dB / 128dB peak LF Driver: 15inch Heavy Duty Woofer MF Driver: 6inch Woofer HF Driver: 1inch exit 1.5inch VC Titanium Driver Nominal Impedance full range: 8 ohms Enclosure: Virgin Polypropylene Suspension/Mounting: 13/8inch pole mount cup 4 Fly Points Transport: 2 Handles Grill: Black steel Connectors: Two Neutrik Combo 1/4inch / Speakon s Dimensions (H x W x D): 710 mm x 454 mm x 300 mm 27.875 in x 17.875 in x 13.125 in Net Wt: 18.6 kg (41 lb) Optional Accessories: CVL15 cover LMUB suspension U bracket 12340 WORLD TRADE DRIVE SAN DIEGO, CA USA 92128 CARVIN.COM (USA) CARVINWORLD.COM
Frequency Response dbspl 110 105 100 95 90 85 20Hz 50 100 200 500 1K 2K 5K 10K 20K Rear Plate Crossover Block Diagram HIGH PASS SPEAKER GUARD HORN 1 1 BAND PASS MID Neutrik 1/4inch Speakon Combo LOW PASS 1 1 Suspension with LMUB Bracket PM153 PM153