Product Information Packet EM1T 75HP,550RPM,PH,60HZ,65TS,16M,TEFC,F Copyright All product information within this document is subject to A Motors and Mechanical Inc. copyright protection, unless otherwise noted.
Part Detail Revision: R Status: PRD/A Change #: Proprietary: No Type: AC Elec. Spec: A6WG0107 CD Diagram: 1680-00 Mfg Plant: Mech. Spec: Layout: 6178-01 Poles: 0 Created Date: 10-19-010 ase: Eff. Date: 0-8-018 Leads: #,6# Specs Catalog Number: EM1T Feedback Device: NO FEEDACK Enclosure: TEFC Heater Indicator: No Heater Frame: 65TS Insulation Class: F Frame Material: Iron Inverter Code: Inverter Ready Output @ Frequency: 75.000 HP @ 60 HZ KVA Code: F Synchronous Speed @ Frequency: 600 RPM @ 60 HZ Lifting Lugs: Standard Lifting Lugs Voltage @ Frequency: 0.0 V @ 60 HZ Motor Lead Quantity/Wire Size: @ AWG 60.0 V @ 60 HZ Motor Type: A6068M XP Class and Group: None Mounting Arrangement: F1 XP Division: Not Applicable Power Factor: 9 Agency Approvals: CCSA US Pulley End earing Type: all CSA EEV Pulley Face Code: Standard Auxillary ox: No Auxillary ox Shaft Ground Indicator: No Shaft Grounding ase Indicator: Rigid Shaft Rotation: Reversible earing Grease Type: Polyrex EM (-0F +00F) Shaft Slinger Indicator: No Slinger Current @ Voltage: 161.000 A @ 0.0 V Speed Code: Single Speed 80.700 A @ 60.0 V Motor Standards: NEMA Design Code: Starting Method: Direct on line Page of 9
Drip Cover: No Drip Cover Thermal Device - earing: None Duty Rating: CONT Thermal Device - Winding: None Page of 9
Nameplate NP8L CAT.NO. EM1T SPEC NO. P6G06 HP 75 AMPS 161/80.7 VOLTS 0/60 DESIGN FRAME 65TS RPM 555 HZ 60 AM 0 SF 1.15 DRIVE END EARING 65C0J0X PHASE DUTY CONT INSUL.CLASS F OPP D.E. EARING 65C0J0X TYPE P ENCL TEFC CODE F SER.NO. POWER FACTOR 9 NEMA-NOM-EFFICIENCY 9.6 MAX CORR KVAR 05.0 GUARANTEED EFFICIENCY 9. NEMA NOM/CSA QUOTED EFF MOTOR WEIGHT Page of 9
S/O FRAME HP TYPE PHASE/ HERTZ RPM VOLTS Product Information Packet: EM1T - 75HP,550RPM,PH,60HZ,65TS,16M,TEFC,F AMPS 161/80.7 E/S 89019 LOAD NO LOAD 1/ / / / 5/ LOCKED ROTOR PULL UP REAKDOWN FULL LOAD 65TS DUTY CONT ROTOR 1811005TE HP 0 18.8 7.5 56. 75.0 9.8 75 AM C/ INSUL 0/F TEST S.O. --- AMPERES 15.5.5 0.9 60. 81.1 10 RPM 0 1565 95 555 SPEED TORQUE TORQUE % FULL LOAD AMPERES SHOWN FOR 60 VOLT CONNECTION. IF OTHER CONNECTIONS ARE AVAILALE, THE AMPERES WILL VARY INVERSELY WITH THE RATED VOLTAGE. P S.F. 1.15 PERFORMANCE TEST DATE --- RPM 600 589 579 567 555 5 18 189 7 100 /60 NEMA DESIGN % POWER FACTOR TORQUE STATOR RES. @5 C OHMS (ETWEEN LINES) 8.9 77.9 90.9 9. 91.6 90.9 10 51 111 555 CODE LETTER F L.-FT..0186/.07 0/60 ENCLOSURE TEFC % EFFICIENCY 0 91.9 9.5 9.8 9.5 9.9 AMPERES 50 0 59 81.1 Page 5 of 9 TYPICAL DATA XE MOTOR-NEMA NOM. EFF. 9.6 % GUARANTEED MIN. EFF. 9.% DRAWN Y: CHECKED Y: APPROVED Y: DATE: J.J.HARRISON G. R. WE W.L.SMITH 10/16/0 AC MOTOR PERFORMANCE DATA A6WG0107-R001 DATE ISSUED 1/1/10 USCHJAM Printed on 11/1/017 9: AM
REL S.O. FRAME 65TS HP 75 TYPE P PHASE / HERTZ SPEED IN RPM () 50 50 50 550 560 570 580 590 600 TORQUE IN L. FT. () 0 50 100 150 00 50 00 P.F.() & EFF.() IN % 0 0 0 60 80 100 AMPS AT 60 VOLTS (1) 0 100 00 00 00 500 600 /60 AMPS AT 60 VOLTS (1) 0 0 0 60 80 100 10 10 160 RPM 555 VOLTS 0/60 AMPS 161/80.7 DUTY CONT AM C / INSUL 1 0/F S.F. 1.15 NEMA DESIGN CODE LETTER F ENCLOSURE TEFC E/S 89019 XE MOTOR-NEMA NOM. EFF. 9.6 % GUARANTEED MIN. EFF. 9.% ROTOR 1811005TE TEST S.O. TYPICAL DATA TEST DATE --- STATOR RES. @ 5 C.0186/.07 OHMS (ETWEEN LINES) 0 10 0 0 0 50 60 70 80 90 100 110 HORSEPOWER FL 1 Page 6 of 9 0 00 800 100 1600 000 00 800 00 600 SPEED IN RPM,(FLT = 111 L. FT.) AMPERES SHOWN FOR 0/60 VOLT CONNECTION, IF OTHER VOLTAGE CONNECTIONS ARE AVAILALE, THE AMPERES WILL VARY INVERSELY WITH THE RATED VOLTAGE. DRAWN Y: J.J.HARRISON CHECKED Y: G. R. WE APPROVED Y: W.L.SMITH DATE: 10/16/0 AC MOTOR PERFORMANCE DATA A6WG0107-R001 1/1/10 ISSUE DATE USCHJAM Printed on 11/1/017 9: AM
REL S.O. FRAME 65TS HP 75 TYPE P PHASE / HERTZ 1000 9 8 7 6 5 100 9 8 7 6 5 10 9 8 7 6 5 TIME IN SEC. /60 OVERLOAD ACCELERATION LOCKED-ROTOR RPM 555 VOLTS 0/60 AMPS 161/80.7 DUTY CONT AM C / INSUL 0/F LOCKED-ROTOR, 0.C % FULL LOAD CURRENT S.F. 1.15 NEMA DESIGN CODE LETTER F ENCLOSURE TEFC E/S 89019 ROTOR 1811005TE TEST S.O. TYPICAL DATA TEST DATE --- STATOR RES. @ 5 C.0186/.07 OHMS (ETWEEN LINES) MOTOR INITIAL TEMPERATURE: 1 C FOR OVERLOAD AND ACC. 1 C FOR LOCKED-ROTOR 0 00 00 600 800 1000 100 100 1 Page 7 of 9 THERMAL LIMIT CURVE AMPERES SHOWN FOR 0/60 VOLT CONNECTION, IF OTHER VOLTAGE CONNECTIONS ARE AVAILALE, THE AMPERES WILL VARY INVERSELY WITH THE RATED VOLTAGE. DRAWN Y: J.J.HARRISON CHECKED Y: G. R. WE APPROVED Y: W.L.SMITH DATE: 10/16/0 AC MOTOR PERFORMANCE DATA A6WG0107-R001 1/1/10 ISSUE DATE USCHJAM Printed on 11/1/017 9: AM
8 7 6 5 1 D 6178-01 ENCLOSURE: TOTALLY ENCLOSED MOUNTING: FOOT DUTY MASTER ALTERNATING CURRENT MOTORS SQUIRREL-CAGE INDUCTION CAST IRON CONSTRUCTION FRAMES 6TS-65TS COOLING: FAN COOLED D 1.6 19.88 6.1. 18.10.06.76 1.00.6 C.00 C.50 SQ KEY 19.1 1.875 + -.000.001 5.8 9.00 + -.00.06.00 NPT.89.88 1.8 7.00 8 HOLES.69 11.5 11.5 5.88 1.00 1.5 17.00 15.00 A MAXIMUM PERMISSILE SHAFT RUNOUT WHEN MEASURED AT END OF STD. SHAFT EXTENSION IS.00 T.I.R. UP TO AND INCLUDING 1.65 DIA. AND.00 T.I.R. 1.65 DIA. TO 5 INCH DIA. WEIGHT (LS): 6T = 79 65T = 8 MOTOR WEIGHTS MAY VARY Y 15% DEPENDING UPON RATING. 8 7 6 CUSTOMER IS RESPONSILE FOR DETERMINING THAT ALDOR'S PRODUCT WILL PERFORM SUITALY IN THE INTENDED APPLICATION REV. DESC: UPDATING SHAFT AND CORRECTING A DIMENSION REV: A VERSION: 01 REVISED: 10:55: 0/8/01 TDR: 000000861 MODEL NO. 6178-01 REF: Y: RAGJSS1 DIM SHT TEFC 6-65TS FT MTG W/GRSR AND RELIEF 5 1 6178-01 A Page 8 of 9
Page 9 of 9