MXG2DRTR 3.5 MX G2 LED Lensed Pinhole - Wet Location ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt L0 L1 L2 L3 10W 16W 20W 26W * System Wattage includes driver and LED Module consumption. ** Delivered lumens will vary depending on trim, CCT, CRI, optic and ceiling thickness 780lm 1100lm 1300lm 1500lm 78 69 65 58 (1 1/2 Regress with Lens) 1 1/2 2 0.15 Trim Thickness 1/2 FEATURES Multiple architectural trim options High center beam spot up to 20,900 CBCP Field changeable optics: 9, 12, 2, 36, 5 92 CRI & 82 CRI in 2700K, 3000K, 3500K and 100K with 2SDCM binning 50,000 hours L70 (rated life at 70% output) ELECTRICAL SYSTEM Multiple dimming drivers available input; Power factor >.9, 50/60Hz This product complies with IEEE C62.1 for surge endurance up to 2.5KV. Additional surge protection recommended. Damage from power surge is not covered by warranty. HOUSING Heavy duty black powder coated 18 gauge steel frame. Standard plaster frame accommodates 5/8 ceiling thickness. Extended collar options available for ceilings up to 1" or 2" thick, must specify either EC1 or EC2. INSTALLATION Housing types include IC Air-Tight, CCEA (Chicago Plenum), or Non-IC Rated (must specify). Non-IC rated housings must be kept at a minimum of 3 away from insulation. Butterfly brackets are compatible with C-channel, adjustable bar hangers (1-25 ) and EMT. C-channel is recommended for T-bar ceilings. Bar hangers must be ordered separately. Max. ambient temperature: 131 F (5C). EMERGENCY BACKUP Remote test switch included. External battery operates LED load at a minimum of 00 to 650 lumens for 90 minutes, depending on backup wattage selected. See trim multipliers for detailed performance. Servicing requires above ceiling access. LISTING / WARRANTY 5-Year Intense LED Limited Warranty ETL listed to US and Canadian standards for wet locations (-IC/CP Only) Air-Tight Certified ASTM E283 (-IC/CP Only) ETL listed for direct contact w/insulation (-CP Only) CCEA Chicago Plenum (1/2 Regress with Lens) MXTG2-RFRR308 (1/2 Flat Mount with Lens) 1/2 1/2 2 2 0.15 Trim Thickness 1/2 0.05 Trim Thickness 1/2 TRIM SPECIFICATION High quality trims are die-cast using A380 aluminum and finished with durable powder coat available in multiple finishes, black interior standard. Trim is available with solite, clear tempered or frosted lens, must specify. Trims available in 1 1/2 regress for greater visual comfort or 1/2 regress for consistent look throughout space. Housing Dimensions Are On Page 2 Available Trim Finishes Black White Satin Nickel Antique Bronze Wheat Housing Part Number (Example: MXG2DRTR-ICL1) Housing Installation Type Ceiling Thickness Wattage Dimming Voltage Options MXG2DRTR -NC -IC -CP (Non-IC) (Air-Tight IC) (Chicago Plenum) blank EC1 EC2 (5/8 ) (1 ) (2 ) L0 L1 L2 L3 1 (10W) (16W (20W) (26W) blank (Non-Dimming) DELV 2 (Phase Dimming) D101 (0-10V Dimming 1%) ED10V1 3 (eldoled 0-10V 1%) ED10V01 3 (eldoled 0-10V 0.1%) LUT1 (Lutron Hi-Lume 1%) LUT (Lutron EcoSystem 1%) EDALI1 3 (eldoled DALI 1%) EDALI01 3 (eldoled DALI 0.1%) DMXR (DMX512 RDM 0.1%) blank (120V) 27 (277V) I100 (C-Channel Bar Hangers) I200 (Flat Bar Hangers) I00 (Wood Joist Bar Hangers) EM7 5 (7W Emergency Backup IOTA Part #ILB-CP07-A) EM12 5,6 (12W Emergency Backup IOTA Part #ILB-CP12-A) Trim Part Number (Example: WL1302-SL) Trim Finish Wattage CCT / CRI Optic Lens (1 1/2 Regress) (1/2 Regress) MXTG2-RFRR308 (1/2 Flat Mount) B (Black) W (White) SN (Satin Nickel) AB (Antique Bronze) WH (Wheat) L0 (10W) L1 (16W) L2 (20W) L3 1 (26W) 27 279 30 309 35 359 1 19 (2700K / 82 CRI) (2700K / 92 CRI) () (3000K / 92 CRI) (3500K / 82 CRI) (3500K / 92 CRI) (100K / 82 CRI) (100K / 92 CRI) 09 7 12 2 36 50 (9 Narrow Spot) (12 Spot) (2 Narrow Flood) (36 Flood) (5 Wide Flood) -SL (Solite) -CR (Clear Tempered) -FR (Frosted) Notes: 1. L3 available with Non-IC housings only 2. Available in 120V only 3. Available in L0, L1 & L2 only. DMX512 RDM not available in L0 & L1 5. Access above ceiling required 6. Not available in L0 7. 9 Narrow spot not available in L2 & L3 MX DOWNLIGHTING L/M-128:17 P-13
MXG2DRTR 3.5 MX G2 LED Lensed Pinhole - Wet Location NON-IC & AIR TIGHT IC DIMENSIONS 5 3/8 7 3/ Plaster Frame Accommodation Collar Type Standard EC1 EC2 Ceiling Cut Out: 1/8 1/ 5/8 Standard EC1 = 1 EC2 = 2 Max Ceiling Thickness Up-to 5/8 Up-to 1 Up-to 2 CCEA CHICAGO PLENUM DIMENSIONS 7 1/ 7 3/ Plaster Frame Accommodation Collar Type Standard EC1 EC2 Max Ceiling Thickness Up-to 5/8 Up-to 1 Up-to 2 Ceiling Cut Out: 1/8 1/ 5/8 Standard EC1 = 1 EC2 = 2 OPTICS REPLACEMENT 1. Rotate release cap by turning counter clockwise. 2. Install accessories into accessory holder and replace accessory holder s retaining clip. 3. Place accessory holder and accessory flush against optic and replace release cap. Optics IP-OP712 (12 Spot) IP-OP72 (2 Narrow Flood) IP-OP736 (36 Flood) IP-OP750 (5 Wide Flood) Optic Retainer ring Release cap MX DOWNLIGHTING L/M-128:17 P-1
L0-CR 2 Narrow Flood (2) 5 Wide Flood (50) Report #: ILL-01262016-38 (12) ILL-02082016-11 (2) ILL-01262016- (36) ILL-01262016-7 (50) 32fc 1.2 139fc 2.3 69.3fc 3. 26.7fc 5.1 7W Emergency (x 0.70) Lumens: 667 LPW: 67 Degree 182fc 117fc 81fc CBCP 11660 681 82 6 8 2 1. 2 2. Lumens: 768 LPW: 77 78.3fc 50.1fc 3.8fc 5013 99 1155 85 7 3 Lumens: 780 LPW: 78 39fc 2.9fc 17.3fc 295 2526 130 289 29 2.5 5.7 6. Lumens: 622 LPW: 62 15fc 9.6fc 6.7fc 960 101 892 31 11 7 6.7 8. 10.1 L1-CR 2 Narrow Flood (2) 5 Wide Flood (50) Report #: ILL-01262016-1 (12) ILL-02082016-09 (2) ILL-01262016-20 (36) ILL-01262016-23 (50) 52fc 1.2 19fc 2.3 82.fc 3. 38.8fc.9 7W Emergency (x 0.50) 12W Emergency (x 0.85) Watts: 15. Lumens: 916 LPW: 59 25fc 163fc 113fc 16271 932 661 63 12 3 1. 2 2. 109fc 69.9fc 8.5fc Watts: 15.6 Lumens: 1072 LPW: 69 6988 6278 1611 119 10 Watts: 15. Lumens: 1108 LPW: 71 6.fc 29.7fc 20.6fc 2967 2956 1953 523 7 3 5.1 6.3 7. Watts: 15.6 Lumens: 870 LPW: 56 21.8fc 1fc 9.7fc 1396 171 1266 59 153 9 6. 8.2 9.9 MX DOWNLIGHTING L/M-128:17 P-15
L2-CR 2 Narrow Flood (2) 5 Wide Flood (50) Report #: ILL-01262016-26 (12) ILL-02082016-06 (2) ILL-01262016-32 (36) ILL-02082016-05 (50) 508fc 1.3 21fc 2.3 99.fc 3. 38.7fc 5.2 7W Emergency (x 0.0) 12W Emergency (x 0.68) Watts: 20. Lumens: 1127 LPW: 55 Degree 286fc 183fc 127fc CBCP 18296 11928 71 90 16 1.7 2.2 2. Watts: 20.8 Lumens: 1311 LPW: 63 136fc 86.9fc 60.3fc 8688 7933 1963 123 13 Watts: 20. Lumens: 133 LPW: 65 55.9fc 35.8fc 2.8fc 3577 3527 2353 626 92 5.1 6. 7.7 Watts: 20.8 Lumens: 1061 LPW: 51 21.8fc 13.9fc 9.7fc 1395 17 129 777 236 15 6.9 8. 10. L3-CR 2 Narrow Flood (2) 5 Wide Flood (50) Report #: ILL-01262016-11 (12) ILL-02082016-02 (2) ILL-01262016-02 (36) ILL-02082016-01 (50) 582fc 1.3 27fc 2.3 139fc 3.3 3fc 5.7 7W Emergency (x 0.35) 12W Emergency (x 0.59) Watts: 26.3 Lumens: 1300 LPW: 9 327fc 209fc 15fc 20935 13727 773 95 19 5 1. 2.2 2. 15fc 98.7fc 68.6fc Watts: 26.3 Lumens: 191 LPW: 57 9871 9010 2232 10 15 5 Watts: 26. Lumens: 197 LPW: 57 78.3fc 50.1fc 3.8fc 5008 921 2673 55 72 5. 5.5 6. Watts: 26.3 Lumens: 1107 LPW: 2 2.2fc 15.5fc 10.8fc 158 1508 1366 809 296 26 7. 9. 11.5 MX DOWNLIGHTING L/M-128:17 P-16
DIMMING COMPATIBILITY 0-10V DIMMING 120V/277V Dims down to 1% or 0.1% light output Consult dimming manufacturer for installation instructions and power packs Manufacturer Part Number(s) HUNT PS-010-IV-120V, PS-010-WH-120V, PS-010-3W-IV-120, PS-010-3W-WH-120V, PS-010-IV-277V, PS-010-WH-277V, PS-010-3W-IV-277V, PS-010-3W-WH-277V, FD-010: PS-IFC-010-IV, PS-IFC-010-WH-120/277V, FD-010: PS-IFC-010-3W-IV, PS-IFC-010-3W-WH-120/277V, FD-010-120V, FD-010-277V Leviton Leviton Centura Fluorescent Control System, IllumaTech IP7 Series, DPSPE-212 Lightolier ZP600FAM120, MP1500FAM120, V2000FAMU Lithonia LEQ BC, LEQ LVBC, SLD LVBC, SQ1DC Lutron DVTV, NTFTV Synergy ISD BC 120/277 INPUT 0-10V DIMMER VIOLET (+) GREY (-) - NEGATIVE FORWARD / REVERSE PHASE DIMMING 120V only See chart below for minimum dimming levels Consult dimming manufacturer for installation instructions MX MODULE DIMS DOWN TO Product Part Number(s) Type L0 L1 L2 L3 Leviton IPE0 Reverse 8% 6% 8% 8% Leviton IPI06-1LZ Forward - 1% 1% 1% Leviton 6633-P Forward 1% 1% 1% - Lutron DVELV300P Reverse 8% 6% 9% 9% Lutron DVCL-153P Forward 1% 1% 1% 1% Lutron S600P Forward 3% 1% 2% 2% Cooper DLC03P Forward - 1% 1% 2% Cooper DAL06P Forward - 1% 1% 1% 120V INPUT FROM DIMMER - NEGATIVE DALI DIMMING Dims down to 1% or 0.1% light output 120 OR 277V INPUT - NEGATIVE ORANGE (DALI DA) ORANGE/ (DALI DA) DMX512 RDM DIMMING Dims down to 0.1% light output RDM channel programmable 120 OR 277V INPUT - NEGATIVE ORANGE/ (DMX +) DMX512 IN ORANGE (DMX -) BROWN (DMX GROUND) MX DOWNLIGHTING L/M-128:17 P-65
DIMMING COMPATIBILITY LUTRON ECOSYSTEM DIMMING Dims down to 1% Consult dimming manufacturer for installation instructions Product Part Number(s) EcoSystem CS-1L-WM, CS-2L-WM, CS-1L-CM, CS-2L-CM, EcoSystem ESN, Grafik Eye QS with EcoSystem, Quantum ECO SYSTEM CONTROL (BY OTHERS) ECO SYS BUS VIOLET (E1) - NEGATIVE VIOLET (E2) LUTRON HI-LUME DIMMING Dims down to 1% Consult dimming manufacturer for installation instructions AYF-103P, AYF-103P-277, DVF-103, DVF-103P-277, DVSCF-103P, DVSCF-103P-277, HQRD-F6AN- DV, LXF-103PL, LXF-103PL-277, NF-10, NF-103P, NF-103P-277, NF-10-277, NTF-10, NTF-103P, NTF-103P-277, NTF-10-277, RRD-F6AN-DV, SF-12P-277-3, SF-103P, MAF-6AM, MAF-6AM-277, MSCF-6AM, MCSF-6AM-277, MRF2-F6AN-DV, SF-10P, SF-12P-277, SPSF-6A, SPSF-6A-277, SPSF-6AM, SPSF-6AM-277, VF-10, VTF-6AM 3-WIRE CONTROL (BY OTHERS) ORANGE - NEGATIVE MX DOWNLIGHTING L/M-128:17 P-66