Tyres, ramps and Suction pads Nr. 01.01 High Lifter Foam-filled puncture resistant tyres Foam-filled punctureproof tyre. MASSIVe MASSIVe MASSIVe Nr. 010633 Nr. 011201 Nr. 01.02 Wheels With non-marking tyres. Do not leave marks on your floor. For indoor use. Nr. 011616 + 001318 Nr. 011616 + 001318 Ask Please Nr. 011085 Nr. 01.03 Wheel cover Wheel cover for non-marking driving indoor. Nr. 011004 Nr. 011004 Nr. 010999 Nr. 010999 Nr. 010999 + 011442 Nr. 02.01 Ramp, small or large Aluminium ramp. Ramp measures 2000 x 650 or 2500 x 850 mm. Nr. 010316 Nr. 010316 Nr. 02.02 Ramp for Aluminium ramp. Ramp measures 3000 x 590 mm. Nr. 011617 Set of 2 pcs. Nr. 02.03 Alu Transportpalette Transport palette/ramp for safe transportation of your SmartLift. Ramp measures 900 x 2000 mm. Nr. 03.01 Suction pads Ø250 mm Rubber membrane can be replaced. Max. load capacity at set of 4 pcs. 250 kg. Nr. 03.02 Suction pads Ø300 mm Max. load capacity at set of 4 pcs. 400 kg.
Suction pads Nr. 03.03 High Lifter Suction pads Ø400 mm Max. load capacity at set of 4 pcs. 600 kg. Nr. 03.04 Suction pads plaster Ø125 mm Max. load capacity at set of 4 pcs. 70 kg. Nr. 03.05 SL Profile suction pad Ø100 mm Suction pad for use with Paroc sandwich elements, Stone, concrete, firedoors etc. Max. load capacity at set of 4 pcs. 42 kg. Nr. 03.06 SL Profile suction pad Ø200 mm Suction pad for use with Paroc sandwich elements, Stone, concrete, firedoors etc. Max. load capacity at set of 4 pcs. 166 kg. Nr. 03.07 SL Profile suction pads Ø300 mm Suction pad for use with Paroc sandwich elements, Stone, concrete, firedoors etc. Max. load capacity at set of 4 pcs. 392 kg. Nr. 03.08 SL Profile suction pads Ø400 mm Suction pad for use with Paroc sandwich elements, Stone, concrete, firedoors etc. Max. load capacity at set of 4 pcs. 666 kg. Nr. 03.09 Rectangular suction pads with hoses and fittings Suitable for use with e.g. ridged doors where the suction area is small. The suction pads measure 370 x 80 mm. Max. load capacity (4 pads) 127 kg. Nr. 03.10 Bellows Suction Pads Ø250 mm Suited for handling uneven and arched workpieces Max. load capacity at set of 4 pcs. 250 kg.
Suction pads and yoke Nr. 03.11 Suction pad protection type 210, 300 or 400 For suction pad 210, 300 or 400 mm. Nr. 011545 Nr. 010968 Nr. 010969 Nr. 010968 Nr. 010968 Nr. 010969 High Lifter Nr. 010969 Nr. 010968 +69 Nr. 010968 Nr. 04.01 Flexolink Flexible rubber connectors for curved panes of glass, up to 12º curve. for suction pad up to Ø 300 mm Nr. 010571 for suction pad larger than Ø 300 mm. Nr. 010571 Nr. 010571 Nr. 010571 Nr. 010571 Nr. 04.02 Suction pad bracket flex Adjustable bracket for suction pad. 200 mm adjustment. Nr. 001174 Nr. 001174 Nr. 001174 Nr. 001175 Nr. 04.03 Double suction pad bracket flex With Ball joint and suction pad Adjustable bracket, double, for oval suction pad. 200mm adjustment. For curved panes of glass. Max. load capacity at set of 4 pcs. 400 kg. Nr. 001297 010756 Nr. 001297 010756 Nr. 001298 010756 Nr. 001299 010756 Nr. 001298 010756 Nr. 001298 010756 Nr. 001299 010756 Nr. 001299 010756 Nr. 001299 010756 Nr. 010756 001298 Nr. 04.04 Extender +105 mm Suction pad extender. Suitable to attach loads with various levels. Nr. 001099 Nr. 001099 Nr. 001099 Nr. 001099 Nr. 04.05 Extender +500 mm Suction pad extender. Suitable to attach loads at with various levels. Nr. 04.06 Telescopic extension Adjustable telescopic extension. 325 mm extension. For compression of yoke (SL 400, 380, 280, 208) or traverse (SL 780, 608, 580). 1 pcs Nr. 04.07 Flexi Beam A rotary traverse which allows you to align suction pads in a row or place them in other ways. Suitable for use with narrow or e.g. triangular loads. Nr. 001225 Nr. 001225 Nr. 001225 + Delivery time
Suction pads and yoke Nr. 04.08 High Lifter Rotatable traverse E.g. for curved glass. Traverse measures 160 mm. 1 pcs Nr. 04.09 Profile tube 40x40 mm Extension for traverse. L= 50 cm. Nr. 04.10 Profile tube 50x50 mm Extension for yoke (SL 208, 280, 380, 400) or traverse (SL 580, 608, 780). L= 50 cm. Nr. 04.11 Profile tube 50x50 mm Extension for yoke (SL 208, 280, 380, 400) or traverse (SL 580, 608, 780). L= 75 cm. Nr. 04.12 Profile tube 60x60 mm Extension for yoke (SL 580, 608,780) or traverse (SL 780). L= 50 cm. Nr. 04.13 Profile tube 60x60 mm Extension for yoke (SL 580, 608, 780) or traverse (SL 780). L= 100 cm. Nr. 001229 Nr. 001229 Nr. 001229 Nr. 001229 Nr. 04.14 Distributor block A distributor block to attach additional suction pads. Nr. 04.15 Gyro Gyro makes it easy and fast to establish and maintain the yoke in vertical and horizontal position.
Yoke and misc. accessories Nr. 04.16 High Lifter Electrical yoke rotation For attaching items using suction from horizontal at great heights, or installation of ceilings at low heights. Nr. 001267 Nr. 001267 Nr. 05.01 Pallet fork type 300 or 500 Smartlift pallet fork. Max. load capacity 300 or 500 kg. Accessories can easily be replaced by one person. Nr. 001164 Nr. 001164 Nr. 001164 Nr. 05.02 Special fork For lifting extra wide items, e.g. joists over sectional doors. Contact the Development Department for more details. Nr. 05.03 Lifting hook type 400, 600 or 800 Strong CE-marked lifting hook. Max. load capacity 380, 600 or 800 kg. Equipment can easily be replaced by one person. No tools required. Nr. 001133 Nr. 001133 Nr. 001133 Nr. 001132 Nr. 05.04 Clamp for use with cylindrical loads Clamp for use with pipes and other cylindrical loads. Accessories can easily be replaced by one person. Contact the Development Department for more details. Nr. 05.05 Locking Electric key switch. Nr. 05.06 Lifting yoke for 780 Lifting yoke for crane, etc. to hoist in a multi-storey building. With chains Nr. 001316 Nr. 05.07 Special colour Select one or more special RAL colours.
Misc. accessories, remote control, batterie, charger Nr. 05.08 Pallet fork type 500R Smartlift pallet fork.for Smartlift with electrical yoke rotation Max. load capacity 500 kg. Accessories can easily be replaced by one person. Nr. 001348 High Lifter Nr. 001348 Nr. 05.09 Lifting hook type 600R Strong CE-marked lifting hook.for Smartlift with electrical yoke rotation Max. load capacity 600 kg. Accessories can easily be replaced by one person. Nr. 001349 Nr. 001349 Nr. 06.01 Remote control unit With function for electrical yoke rotation Nr. 06.02 Radio control Pocket Radio control for selected SmartLift models Nr. 06.03 Radio control Rocket Radio control for selected SmartLift models. With function for electrical vacuum. Nr. 06.04 Radio control Rocket Radio control for selected SmartLift models. With extra optional function. Nr. 06.05 Radio control system extra Sky Lifter (master-master) Additional radio controller. Ideal for use when the final positioning of the load takes place at a distance from the starting point. Nr. 010977 Nr. 06.06 Battery for radio control system When you have an extra battery, you can operate the controller non-stop without breaks for recharging. Nr. 010572 Nr. 010572
Misc. accessories for Sky Lifter Nr. 06.07 High Lifter Charging for battery (radio controller) Charger for battery. Nr. 011361 Nr. 011361 Nr. 06.08 Trafo for the charging unit (radio controller) Adaptor for the charger to the current network. (110-240 V, 50-60 Hz). Nr. 011368 Nr. 011368 Nr. 06.09 Lithium battery (Sky Lifter) When you have an extra battery, you can operate Sky Lifter non-stop without breaks for recharging. Nr. 06.10 Charger for lithium battery (Sky Lifter) Charger unit for battery. (110-240 V, 50-60 Hz). Nr. 010881 Nr. 010885
Misc. accessories for Sky Lifter Nr. 07.01 High Lifter Crane adapter Manitou Mounting adapter to install Sky Lifter on a Manitou. Nr. 001180 Nr. 07.02 Quick adapter Manitou M2016 Quick adapter to install Sky Lifter on a Manitou. Nr. 07.03 Quick-change fitting Sky Lifter M2016 Mounting set for SL 400 Skylifter Parts with no suspended attachment to the parent machine. Nr. 07.04 Bearing plate Quick-Change M2016 Pre-drilled plate for mounting on. Parts with no suspended attachment to the parent machine. State serial no. of machine when ordering Quick-Change and hole plates. Nr. 07.05 Perforated plate Pre-drilled plate for mounting on. Parts with no suspended attachment to the parent machine. State serial no. of machine when ordering Quick-Change and hole plates. Nr. 07.06 JCB Quick-Change M2016 Quick-change for mounting on machines with Q-fit changer. Can be used for Quick-Change fitting Sky Lifter M2016. Nr. 07.07 Sky Lifter crane adapter Supplied to fit specific crane model on request. Nr. 07.08 Lifting yoke with chains Lifting yoke for crane etc. for lifting. Nr. 001220 Nr. 001317 Nr. 011051 Nr. 011462 Nr. 001308 Nr. 001307