FLYWHEEL HORSEPOWER Gross:19 kw 00 HP @ 00 rpm Net:10 kw 1 HP @ 00 rpm OPERATING WEIGHT 10 00 kg 9,0 1,0 lb PC0- PC 0 www.komatsu.com Printed in Japan 000 IP.As(10) Photo may include optional equipment. CEN000-00 Materials and specifications are subject to change without notice. is a trademark of Komatsu Ltd. Japan.
WALK-AROUND HORSEPOWER Gross:19 kw 19 HP @ 00 rpm Net:10 kw 1 HP @ 00 rpm Genuine Answers for Land and Environment Optimization Ecology and Economy Features Low fuel consumption by total control of the engine, hydraulic and electronic system. Reduces fuel consumption by approx. 10%. (Compared with the PC0-) Low emission engine A powerful, turbocharged and air-to-air aftercooled Komatsu SAAD10E-1 provides 10 kw 1 HP. This engine meets EPA Tier and EU stage A emission regulations, without sacrificing power or machine productivity. Economy mode improves fuel consumption. Eco-gauge for energy-saving operations Extended idling caution for fuel conservation Low operation noise The dynamic noise is lowered by 1 d compared with the PC0-, realizing a low noise operation. Large Drawbar Pull Provides superb steering and slope climbing performance. See pages and. Large TFT LCD monitor Easy-to-see and use " large multi-function color monitor Can be displayed in 10 languages for global support. TFT : Thin Film Transistor LCD : Liquid Crystal Display See page. Large Comfortable Cab Low-noise cab, similar to passenger car Low vibration with cab damper mounting Highly pressurized cab with optional air conditioner Operator seat and console with armrest that enables operations in the appropriate operational posture See page. OPERATING WEIGHT 10 00 kg 9,0 1,0 lb UCKET CAPACITY 0. 1. m 0.9 1. yd Easy Maintenance Long replacement interval of engine oil, engine oil filter, and hydraulic filter Remote mounted engine oil filter and fuel drain valve for easy access Equipped with the fuel pre-filter as standard (with water separator) Side-by-side cooling function enables only the cooling unit to be attached and detached. Equipped with the EMMS monitoring system. See page 9. Safety Design Cab dedicated to hydraulic excavator for protecting the operator if the event of machine rolls over. Anti-slip plates for safe work on machine Safety enhancement with large side-view, sidewise, and rear mirrors added. Rear view monitoring system for easy checking behind the machine (optional) OPG top guard level capable with optional bolt-on top guard See page. Photo may include optional equipment.
ECOLOGY & ECONOMY FEATURES Komatsu Technology Seven-inch TFT liquid crystal display Hydraulic control valve Flow divide/merge control with EPC Hydraulic system controller Low Emission Engine Komatsu SAAD10E-1 meets EPA Tier and EU stage A emission regulations and reduced NOx emission by 9 % compared with the PC0-. Working Modes Selectable Two established work modes are further improved. P mode Power or work priority mode has low fuel consumption, but fast equipment speed and maximum production and power are maintained. E mode Economy or fuel priority mode further reduces fuel consumption, but maintains the P-mode-like working equipment speed for light duty work. Komatsu develops and produces all major components, such as engines, electronics and hydraulic components, in house. With this Komatsu Technology, and adding customer feedback, Komatsu is achieving great advancements in technology. To achieve both high levels of productivity and economical performance, Komatsu has developed the main components with a total control system. The result is a new generation of high performance and environment friendly excavators. Electronic control unit for engine Engine Heavy duty HPCR (High Pressure Common Rail) system Low Fuel Consumption Main pump Two pump independent control Low Operation Noise Enables a low noise operation using the low-noise engine and methods to cut noise at source. Dynamic noise 1 d reduced (Compared with the PC0-) You can select Power or Economy modes using a one-touch operation on the monitor panel depending on workloads. E Fuel priority E mode The newly-developed Komatsu SAAD10E-1 [ecot] engine enables NOx emissions to be significantly reduced with the accurate multi-staged fuel injection by the engine controller. It improves total engine durability using the high-pressure fuel injection system developed specifically for construction machinery. This excavator significantly reduces hourly fuel consumption using the highly-efficient matching techniques of the engine and hydraulic unit and also provides features that promote energy-saving operations such as the E mode and Eco-gauge. Reduced fan speed Large capacity radiator Electronically controlled common rail type engine Multi-staged injection Highly rigid cylinder block Idling Caution To prevent unnecessary fuel consumption, an idling caution is displayed on the monitor, if the engine idles for minutes or more. Sound insulation cover around muffler Low-noise muffler Optimal arrangement of sound absorbing materials P Work priority P mode Eco-gauge that Assists Energysaving Operations Equipped with the Eco-gauge that can be recognized at a glance on the right of the multi-function color monitor for environment-friendly energy-saving operations. Allows focus on operation in the green range with reduced CO emissions and efficient fuel consumption. Fuel consumption 10% reduced Compared with the PC0- at P mode and 100% working efficiency. Large Maximum Drawbar Pull PC0- s maximum drawbar pull provides superb slope climbing performance. The optional heavy duty travel motor gives a Eco-gauge extra % increase.
WORKING ENVIRONMENT Safety Features Cab Dedicated to Hydraulic Excavator The cab is designed specifically for hydraulic excavators and gains reinforced strength from the pipe-structured cab framework. The cab framework provides the high durability and impact resistance with very high impact absorbency. The seat belt keeps the operator in the safety of the cab during a rollover. Lock Lever Locks the hydraulic pressure to prevent unintentional movement. Neutral start function only allows machine to be started in lock position. Large Side-view, Rear, and Sidewise Mirrors Enlarged left-side mirror and addition of rear and side mirror allow the PC0- to meet the new ISO visibility requirements. Low Cab Noise The newly-designed cab is highly rigid and has excellent sound absorption ability. Thorough improvement of noise source reduction and use of low noise engine, hydraulic equipment, and air conditioner allows this machine to generate a low level of noise similar to that of a passenger car. Low Vibration with Cab Damper Mounting PC0- uses multi-layer viscous mount system that incorporates longer stroke and the addition of a spring. The new cab damper mounting combined with high rigidity deck aids vibration reduction at operator seat. Rubber Silicon Oil Spring Wide Newly-designed Cab Newly-designed wide spacious cab includes seat with reclining backrest. The seat height and longitudinal inclination are easily adjusted using a pullup lever. You can set the appropriate operational posture of armrest together with the console. Reclining the seat further enables you to place it into the fully flat state with the headrest attached. Pressurized Cab Optional air conditioner, air filter and a higher internal air pressure (+.0 mm Aq +0."Aq) prevent external dust from entering the cab. Automatic Air Conditioner (optional) Enables you to easily and precisely set cab atmosphere with the instruments on the large LCD. The bi-level control function keeps the operator's head and feet cool and warm respectively. This improved air flow function keeps the inside of the cab comfortable throughout the year. Defroster function keeps front glass clear. Anti-slip Plates Highly durable antislip plates maintain superior traction performance for the long term. Pump/engine Room Partition Pump/engine room partition prevents oil from spraying onto the engine if a hydraulic hose should burst. Thermal and Fan Guards Thermal and fan guards are placed around high-temperature parts of the engine and fan drive.
MAINTENANCE FEATURES Large LCD Color Monitor Large multi-lingual LCD Monitor A large user-friendly color monitor enables safe, accurate and smooth work. Improved screen visibility is achieved by the use of TFT liquid crystal display that can easily be read at various angles and lighting conditions. Simple and easy to operate switches. Industry first function keys facilitate multi-function operations. Displays data in 10 languages to globally support operators around the world. Indicators 1 Travel speed Engine water temperature gauge 1 Auto-decelerator Working mode asic operation switches Mode Selection The multi-function color monitor has Power mode, Economy mode, Lifting mode, reaker mode and Attachment mode. Working Mode Application Advantage P Power mode Maximum production/power Fast cycle time E Economy mode Excellent fuel economy L Auto-decelerator Working mode selector Traveling selector Hydraulic oil temperature gauge Fuel gauge Eco-gauge Function switches menu Lifting mode uzzer cancel Wiper Windshield washer asic operation switches Hydraulic pressure is increased by % 1 EMMS (Equipment Management Monitoring System) Monitor Function Controller monitors engine oil level, coolant temperature, battery charge and air clogging, etc. If controller finds any abnormality, it is displayed on the LCD. 1 Function switches Air conditioner operation switches Side-by-side Cooling Since radiator, aftercooler and oil cooler are arranged in parallel, it is easy to clean, remove and install them. Radiator, aftercooler, and oil cooler made of aluminum have high cooling efficiency and are easily recycled. Equipped with the Fuel Pre-filter (with Water Separator) Removes water and contaminants in the fuel to prevent fuel problems. (With built-in priming pump) Washable Cab Floormat The PC0- s cab floormat is easy to keep clean. The gently inclined surface has a flanged floormat and drainage holes to facilitate runoff. Easy Access to Engine Oil Filter and Fuel Drain Valve Engine oil filter and fuel drain valve are remote mounted to improve accessibility. Equipped with the Eco-drain Valve as Standard. Prevents clothes and the ground from becoming contaminated due to oil leakage when replacing the engine oil. Large-capacity Fuel Tank and Rustproof Treatment 00-liter (10 U.S. gal) high-capacity fuel tank. Effective corrosion resistance using rustproof treatment. Sloping Track Frame Prevents dirt and sand from accumulating and allows easy mud removal. Gas Assisted Engine Hood Damper Cylinders The engine hood can be easily opened and closed with the assistance of the gas assisted engine hood damper cylinders. Long-life Oil, Filter Uses high-performance filtering materials and long-life oil. Extends the oil and filter replacement interval. Engine oil & Engine oil filter Hydraulic oil Hydraulic oil filter Air Conditioner Filter (optional) The air conditioner filter is removed and installed without the use of tools facilitating filter maintenance. Internal air conditioner filter Hydraulic oil filter (Eco-white element) every 00 hours every 000 hours every 1000 hours External air conditioner filter ATT Lifting mode reaker operation Attachment mode Optimum engine rpm, hydraulic flow Optimum engine rpm, hydraulic flow, way When the Lifting mode is selected, lifting capacity is increased % by raising hydraulic pressure. Maintenance Function Monitor informs replacement time of oil and filters on LCD when the replacement interval is reached. Trouble Data Memory Function Long Work Equipment Greasing Interval (optional) High quality MRC bushings and resin shims are optionally available for work equipment pins excluding bucket, extending greasing interval to 00 hours. Monitor stores abnormalities for effective troubleshooting. 9
SPECIFICATIONS DIMENSIONS ENGINE Model............................. Komatsu SAAD10E-1 Type.................... Water-cooled, -cycle, direct injection Aspiration......................... Turbocharged, aftercooled Number of cylinders.................................... ore...................................... 10 mm.1" Stroke..................................... 1 mm." Piston displacement...........................9 ltr 0 in Horsepower: SAE J199........................ Gross 19 kw 00 HP ISO 99 / SAE J19................. Net 10 kw 1 HP Rated rpm................................... 00 rpm Fan drive method for radiator cooling............... Mechanical Governor........................ All-speed control, electronic Meets 00 EPA Tier and EU stage A HYDRAULICS Type.. HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves Number of selectable working modes....................... Main pump: Type..................... Variable displacement piston type Pumps for........ oom, arm, bucket, swing, and travel circuits Maximum flow.................. 0 ltr/min 119 U.S. gal/min Supply for control circuit................. Self-reducing valve Hydraulic motors: Travel............... x axial piston motor with parking brake Swing.......... 1 x axial piston motor with swing holding brake Relief valve setting: Implement circuits............. MPa 0 kgf/cm,00 psi Travel circuit................. MPa 0 kgf/cm,00 psi Swing circuit.................9 MPa 9 kgf/cm,190 psi Pilot circuit...................... MPa kgf/cm 0 psi Hydraulic cylinders: (Number of cylinders bore x stroke x rod diameter) oom.... 10 mm x 100 mm x 100 mm." x 1." x.9" Arm..... 1 10 mm x 1 mm x 110 mm.9" x." x." ucket.... 1 10 mm x 1009 mm x 100 mm." x 9." x.9" DRIVES AND RAKES Steering control....................... Two levers with pedals Drive method.................................. Hydrostatic Maximum drawbar pull.............. 9 kn 00 kgf,000 lb........................... *( kn 900 kgf 9,00 lb) Gradeability....................................0%, Maximum travel speed: High. km/h. mph *(. km/h. mph) (Auto-Shift) Mid.1 km/h. mph *(. km/h.1 mph) Low.0 km/h 1.9 mph *(. km/h 1. mph) Service brake Hydraulic lock Parking brake.........................mechanical disc brake *with optional heavy duty travel motor SWING SYSTEM Drive method.................................. Hydrostatic Swing reduction............................. Planetary gear Swing circle lubrication....................... Grease-bathed Service brake............................... Hydraulic lock Holding brake/swing lock................ Mechanical disc brake Swing speed.................................... 10. rpm UNDERCARRIAGE Center frame.................................... X-frame Track frame.................................. ox-section Seal of track................................. Sealed track Track adjuster.................................. Hydraulic Number of shoes (each side)............................ Number of carrier rollers......................... each side Number of track rollers (each side)......................... COOLANT AND LURICANT CAPACITY (REFILLING) Fuel tank............................. 00 ltr 10. U.S. gal Coolant............................... 0. ltr. U.S. gal Engine.................................1 ltr.1 U.S. gal Final drive, each side....................... ltr. U.S. gal Swing drive.............................. ltr. U.S. gal Hydraulic tank.......................... 1 ltr.9 U.S. gal OPERATING WEIGHT (APPROXIMATE) Operating weight including 0 mm 19'" one-piece boom, 0 mm 10'0" arm, SAE heaped 1. m 1. yd backhoe bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment. PC0- Operating Ground Shoes Weight Pressure 00 mm 10 kg " 9,0 lb 00 mm 00 kg " 1,00 lb 00 mm 00 kg 1." 1,0 lb kpa 0. kgf/cm.9 psi kpa 0.9 kgf/cm.9 psi kpa 0. kgf/cm.1 psi Arm Length 00 mm '" 0 mm 10'0" 00 mm 11'" A Overall length 990 mm '" 90 mm '" 990 mm '" Length on ground (transport) 090 mm 1'0" 0 mm 1'" 90 mm 1'" C Overall height (to top of boom) 10 mm 10'10" 00 mm 10'" 0 mm 10'9" D Overall width 190 mm 10'" E Overall height (to top of cab) 1 mm 10'" F Ground clearance, counterweight 11 mm '0" G Ground clearance (minimum) 9 mm 1'" H Tail swing radius 90 mm 9'" I Track length on ground 00 mm 1'" J Track length mm 1'" K Track gauge 90 mm '" L Width of crawler 190 mm 10'" M Shoe width 00 mm " N Grouser height 0 mm 1." O Machine cab height mm '" P Machine cab width 10 mm '11" Q Distance, swing center to rear end 90 mm 9'" A C E WORKING RANGE D (m) 11 10 9 1 0-1 - - - - - - - 11 (m) 10 9 0(ft) G F ACKHOE UCKET, ARM, AND OOM COMINATION Arm 00 mm '" 0 mm 10'0" 00 mm 11'" A Max. digging height 90 mm 1'" 10000 mm '10" 1010 mm '" Max. dumping height 0 mm '1" 0 mm '1" 00 mm '" C Max. digging depth 90 mm 19'" 0 mm 1'" 90 mm '9" D Max. vertical wall digging depth 00 mm 1'9" 0 mm 1'" 90 mm 19'" E Max. digging depth of cut for ' level 0 mm 1'10" 0 mm 0'9" 90 mm '" F Max. digging reach 90 mm 1'" 10100 mm '" 100 mm '" G Max. digging reach 90 mm 1'0" 9990 mm '9" 1090 mm '1" at ground level H Min. swing radius 00 mm 11'" 0 mm 11'" 90 mm 11'" ucket digging force 1 kn 1 kn 1 kn at power max. 1900 kgf/9,0 lb 1900 kgf/9,0 lb 1900 kgf/9,0 lb Arm crowd force 1 kn 1 kn 1 kn at power max. 100 kgf/,00 lb 1900 kgf/0,0 lb 100 kgf/,0 lb ucket digging force 19 kn 19 kn 19 kn at power max. 000 kgf/,0 lb 000 kgf/,0 lb 000 kgf/,0 lb Arm crowd force 10 kn 1 kn 1 kn at power max. 100 kgf/,10 lb 1100 kgf/1,00 lb 100 kgf/,0 lb ISO rating SAE rating ucket Capacity (heaped) Width Weight Number Arm Length of Teeth SAE, PCSA CECE Without Side Cutters With Side Cutters With Side Cutters.m '".0m 10'0".m 11'" 1. m 1. yd 1.10 m 1. yd 100 mm.1" 10 mm 9." kg 1,0 lb : General purpose use, density up to 1. ton/m 1. U.S. ton/yd H 1 0 G.L. P G K D,L E M C A I J H,Q F N O 10 11
C LIFTING CAPACITY A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side : Rating at maximum reach PC0- Arm: 00 mm '" ucket: 1. m 1. yd Shoe: 00 mm " triple grouser PC0- Arm: 0 mm 10'0" ucket: 1. m 1. yd Shoe: 00 mm " triple grouser Conditions: 0 mm 19'" one-piece boom A MAX. m '.1 m 0'. m 1'.0 m 9' 1. m ' Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs. m *0 kg *0 kg ' *1,00 lb *1,00 lb.1 m *0 kg 0kg *10 kg 00 kg 0' *11,00 lb 10,00 lb *1,00 lb 1,00 lb. m *00 kg 000 kg 00 kg 0 kg *900 kg 00 kg *900 kg *900 kg 1' *1,000 lb,00 lb 1,00 lb 9,00 lb *1,00 lb 1,900 lb *0,00 lb *0,00 lb.0 m 0 kg 0 kg 10 kg 100 kg 0 kg 90 kg *11900 kg 900 kg 10' 11,00 lb,900 lb 1,00 lb 9,100 lb 19,00 lb 1,100 lb *,00 lb 0,00 lb 1. m 00 kg 0 kg 90 kg 90 kg 00 kg 00 kg 10 kg 0 kg ' 11,00 lb,00 lb 1,00 lb,00 lb 1,00 lb 1,00 lb 9,00 lb 19,000 lb O m 0 kg 00 kg 0 kg 0 kg 0 kg 00 kg 110 kg 00 kg 0' 11,00 lb,00 lb 1,900 lb,00 lb 1,00 lb 11,900 lb,900 lb 1,00 lb 1. m 900 kg 900 kg 10 kg 00 kg 100 kg 00 kg *100 kg *100 kg ' 1,000 lb,00 lb 1,000 lb 11,00 lb,00 lb 1,100 lb *,00 lb *,00 lb.0 m 0 kg 00 kg 0 kg 00 kg 110 kg 0 kg *19100 kg 100 kg 9' 1,000 lb 10,00 lb 1,00 lb 11,900 lb 9,000 lb 1,00 lb *,00 lb 9,00 lb. m *9000 kg 00 kg *10000 kg 0 kg 1' *19,00 lb 1,00 lb *,000 lb 19,100 lb A MAX. m '.1 m 0'. m 1'.0 m 9' 1. m ' Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs. m *0 kg *0 kg ' *,00 lb *,00 lb.1 m *00 kg *00 kg *00 kg *00 kg *0 kg *0 kg 0' *,00 lb *,00 lb *9,00 lb *9,00 lb *1,000 lb *1,000 lb. m *0 kg *0 kg *0 kg 00 kg *00 kg 00 kg 1' *,00 lb *,00 lb *1,00 lb 9,00 lb *1,900 lb 1,100 lb.0 m *0 kg 10 kg 10 kg 10 kg *00 kg 00 kg *10900 kg 90 kg *10 kg *10 kg 10' *,00 lb.900 lb 1,00 lb 9,100 lb *1,00 lb 1,00 lb *,000 lb 1,100 lb *9,00 lb *9,00 lb 1. m *900 kg 00 kg 000 kg 90 kg 0 kg 00 kg *10 kg 0 kg *00 kg *00 kg ' *,00 lb,00 lb 1,00 lb,00 lb 1,900 lb 1,00 lb *9,00 lb 19,00 lb *1,00 lb *1,00 lb O m *00 kg 100 kg 0 kg 0 kg 00 kg 00 kg 10 kg 0 kg *900 kg *900 kg 0' *9,900 lb,00 lb 1,900 lb,00 lb 1,00 lb 1,000 lb 9,00 lb 1,00 lb *1,00 lb *1,00 lb 1. m 10 kg 0 kg 0 kg 0 kg 10 kg 00 kg 100 kg 00 kg *190 kg *190 kg *0 kg *0 kg ' 11,00 lb,00 lb 1,00 lb,00 lb 1,900 lb 11,00 lb,00 lb 1,100 lb *0,00 lb *0,00 lb *19,00 lb 19,00 lb.0 m 100 kg 000 kg 10 kg 00 kg 1100 kg 0 kg *0100 kg 1,00 kg *1,0 kg *10 kg 9' 1,00 lb,00 lb 1,000 lb 11,00 lb,00 lb 1,00 lb *,00 lb,00 lb *0,100 lb *0,100 lb. m *0 kg 0 kg *1100 kg 00 kg *10 kg *10 kg 1' *1,00 lb 1,00 lb *,00 lb 1,00 lb *,00 lb *,00 lb STANDARD EQUIPMENT Alternator, 0 ampere, v Anti-slip plates Auto-Decel Automatic deaeration system for fuel line Automatic engine warm-up system Cab, OPG top guard level capable with optional bolt-on top guard Counterweight Dry type air cleaner, double element OPTIONAL EQUIPMENT Air conditioner with defroster Air conditioner with large blower Arms 00 mm '" HD arm assembly 0 mm 10'0" HD arm assembly 00 mm 11'" HD arm assembly atteries, large capacity olt-on top guard, [Operator Protective Guards level (FOG)] SPECIAL PURPOSE UCKET ucket Play adjustment mechanism For a complete line up of available attachments, please contact your local Komatsu distributor Electric horn EMMS monitoring system Engine, Komatsu SAAD10E-1 Engine overheat prevention system Fan guard structure Hydraulic track adjusters (each side) In-line filter Multi-function color monitor Power maximizing system oom and arm holding valve oom, 0 mm 19'" oom, 0 mm 19'" with attachment piping Cab front guard Full height guard Half height guard Deck guard Heavy duty travel motor PPC hydraulic control system Radiator and oil cooler dust proof net Rear reflector Rearview mirrors, RH, LH, rear, sidewise Shoes, triple grouser: 00 mm " Starting motor,. kw/ V x 1 Travel alarm Working light, (boom and RH) Working mode selection system One service valve Power supply, 1-V Seat belt, retractable Seat, suspension Shoes, triple grouser 00 mm ", 00 mm 1." Track frame undercover Track roller guards (full length) PC0- Arm: 00 mm 11'" ucket: 1. m 1. yd Shoe: 00 mm " triple grouser A MAX. m '.1 m 0'. m 1'.0 m 9' 1. m ' Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs. m *900 kg *900 kg ' *,00 lb *,00 lb.1 m *00 kg *00 kg *0 kg 0 kg 0' *,100 lb *,100 lb *900 lb 9,00 lb. m *00 kg *00 kg *00 kg 0 kg *00 kg 0 kg 1' *,00 lb *,00 lb *100 lb 9,00 lb *1,00 lb 1,00 lb.0 m *000 kg 900 kg 10 kg 10 kg *90 kg 00 kg *990 kg 900 kg *100 kg *100 kg 10' *,00 lb,00 lb 1,00 lb 9,100 lb *1,00 lb 1,00 lb *,000 lb 1,00 lb *,00 lb *,00 lb 1. m *00 kg 0 kg 90 kg 90 kg 0 kg 00 kg *100 kg 00 kg *1100 kg *1100 kg ' *,00 lb,100 lb 1,100 lb,00 lb 1,900 lb 1,00 lb *,00 lb 19,00 lb *,00 lb *,00 lb O m *0 kg 00 kg 00 kg 0 kg 0 kg 0 kg 100 kg 0 kg *100 kg *100 kg 0' *,00 lb,00 lb 1,00 lb,00 lb 1,00 lb 11,00 lb 9,100 lb 1,00 lb *,000 lb *,000 lb 1. m *00 kg 00 kg 0 kg 0 kg 00 kg 00 kg 1900 kg 100 kg *100 kg *100 kg *00 kg *00 kg ' *10,100 lb,00 lb 1,00 lb,100 lb 1,00 lb 11,00 lb,00 lb 1,00 lb *9,900 lb *9,900 lb *1,00 lb *1,00 lb.0 m 00 kg 0 kg 00 kg 00 kg 000 kg 10 kg 1900 kg 00 kg *100 kg 10 kg *100 kg *100 kg 9' 1,100 lb,900 lb 1,00 lb,100 lb 1,00 lb 11,00 lb,00 lb 1,00 lb *0,00 lb,100 lb *,00 lb *,00 lb. m 0 kg 0 kg 10 kg 00 kg *10 kg 0 kg *1100 kg 10 kg 1' 1,00 lb 10,00 lb 1,000 lb 11,00 lb *,00 lb 1,00 lb *9,900 lb 9,00 lb * Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J/ISO10. Rated loads do not exceed % of hydraulic lift capacity or % of tipping load. 1 1