CME006R Service Parts This parts list contains the part numbers and description of the replacment parts available for this model. To avoid costly and time consuming errors, double check the model and voltage before ordering a part. Table of Contents Cabinet............................................. page Water System.......................................... page Refrigeration System...................................... page Electrical............................................. page ERC6............................................. page 6 BH900.............................................. page BH60............................................. page 8 Kit Parts............................................. page 9 Wiring Diagrams....................................... page 0 July 998 Page
CME006R Service Parts Cabinet 6 a 8 9 0, incl a,, Item Part 0 Insul A0-0 Top panel, Grey A0-00 Top panel, SS 0-8- Top panel, plastic for C and higher series. Will not fit A or B series. 0-686-0 Insulation A9-00 Back panel 0-0- Screw A99-0 Right side panel, grey A99-00 Right side panel, SS 6 A9-00 Right bottom channel A-00 Right side support 8 0-0- Evaporator cover & insul 9 0-0-0 Cover retainer 0 A00-0 Right front panl, grey A00-00 Right front panel, SS -090-0 Emblem 0-699-0 Panel support clip 0--0 Front panel screw 9 6 8 Item Part A89-00 ne piece front pnl, grey A89-0 ne piece front panl, SS 0--0 Screw for above panels A0-0 Left front panel, grey A0-00 Left front panel, SS a 0-9-0 Trim strip 0--0 Push nut for trim strip 6 A98-0 Left side panel, grey A98-00 Left side panel, SS A6-00 Left side channel 8 0-696-0 Left grommet 9 A6-00 Bracket 0 0-696-0 Right grommet 0--0 Screw A9-00 Channel, front top -0808-0 Scotsman emblem -09-0 CM emblem August 008 Page
Item Part 0-6-0 Elbow 0--0 Hose clamp -06-8 -ring 0-8-0 Manifold 0-9-0 Manifold right 6-080-0 Plug 0--0 Water distributor 8 A-0 Evaporator 9 0--0 Ice deflector 0 0-6-0 Right trough 0-6-0 Left trough A-00 Evap support -00- Ice sensor (set) 8 0-689-0 Ice sensor holder 0-06-0 Upper inner splash 6 CME006R Service Parts Water System 6 9" 8 9 0 0 9 0 6 9 8 " 6-06-0 Tube, order unit 0-680-0 Lower inner splash panel 8 0-660-0 Water discharge hose 9-0- Temp sensor set 0 0-8-06 Float stem -06-06 Drain hose, order units -0-0 Purge valve 0-0-0 Drain plug 0-69- Drain fitting 0--0 Float 6 0-88-0 Pump bracket -09- Water level sensor 8-666-0 Water solenoid valve 6-0-00 Coupling half 9-66-0 Harness for water sensor 0 0-88-0 Pump bracket -8- Water pump A0-00 Bracket 0-0-8 Screw 0-69-0 Nylon screw 0--0 Reservoir cover August 008 Page
CME006R Service Parts Refrigeration TXV LB To Evaporator utlets UTLET INLET 0 a LB MUST BE HELD SECUREL IN PLACE USING in-lbs F TRQUE 8 9a EVAPRATR SECTIN 0 9 IN To Evaporator Inlets b 0 To Liquid Line 6 9 8 Item Part 6-06-0 Receiver a A-00 Top receiver bracket b A-00 Bottom receiver bracket 6-080-0 Liquid line fitting 6-09-0 Liquid line check valve 6-00-0 Liquid line acess valve 6-080-0 Discharge line fitting 6 6-08-0 Discharge check valve -- Harvest bypass valve a 6-06-0 Strainer for bypass valve 8 6-0-0 Suction manifold 9 6-0- Accumulator w/insul. 9a A0-00 Accumulator support 0-00- Hot gas valve w/coil -9- Hot gas valve coil only 0a 6-06-0 Strainer for HGV A0-00 Distributor and tubes 6-0- TXV, AAE Z 0-96-0 Insulation for TXV -0- Temp sensor set Discharge Line a 6a 6 August 006 Page -00- Hi pressure cut out 6-08-0 Suction access valve 6-08-0 Port cap 6-08-0 Stem cap 6 0-9-0 Solid Mount 6a 0-9-0 Rubber pad 0-8-0 Rubber grommet 0-0-0 Bolt 8-00-6 Sleeve for rubber grommet a 0-9-0 Washer for solid mount 0-0-0 Washer for rubber grommet 8 8-88- Compressor, 60 Hz, single phase 8-88- Compressor, 60 Hz, phase 8-888-0 crankcase heater for phase Replacement compressors include a dryer 9 0-9-0 Dryer 0 0-06- Nut 0-06- Nut A-0 Evaporator 6-00-0 Hot gas header -00- Low pressure cut out
a CME006R Service Parts PH NL Electrical 9 0 PH NL 8 PH NL 6 PH NL V (/6) TWARD FRNT F MACHINE PH NL Item Part A-00 Transformer -- Snap bushing --0 Snap bushing 0--0 Screw 8-90- 60 Hz potential relay 6 8-90-9 Run capacitor 8-90-8 60 Hz start capacitor 8 A66-00 Strap 9-88- Controller 0-9-0 Single phase contactor -0- Purge valve timer --0 phase contactor -00-0 Time delay relay a 0--0 Screw Item Part -0-0 Bin thermo harness -0- Bin thermostat Not Shown: 0-0-0 Thermostat bracket 0-6-0 pronged knob -66-0 Lo voltage harness --0 Hi voltage harness April 00 Page
CME006R Service Parts ERC6 Remote Condenser Item Part 0-0-08 Screw 0-0-0 Fan guard -0- Headmaster 8-880-0 Fan blade --0 Fan motor Not Shown: A69-00 Leg A96-00 Leg brace 0-6-0 Screw for legs 6-080-0 Quick connect, discharge 6-080-0 Quick connect, liquid April 00 Page 6
CME006R Service Parts BH900 Ice Storage Bin 0 9 a b 8 6 0 9 8 6 ITEM PARTS NUMBER NUMBER DESCRIPTIN A-00 Canopy Assembly A-00 Ice Baffle 0-809-0 Drain Top -06- -ring 0-0-0 Drain casting 6 KLPE Leg Kit, Black KLBS Leg kit, nickel plated -0-0 Emblem 8-09-00 Door gasket (order qty ) 9 9-00-0 Bin gasket (order by foot) 0 0-0- Baffle screw A-00 Door frame assy. A6-0 Frame, for BH900S-C A-00 Door with gasket - BH900 April 00 Page 0-9-09 E ring 0-80-0 Hinge bushing 0-9-0 Door hinge 6 0-96-0 Bin hinge 0-806-0 Shoulder screw 8 0-80-0 Spacer 9 0-0-9 Screw 0-0 0-0- Screw 0- A80-00 Left bin channel a A-00 Back bin channel b A9-00 Right bin channel 0-0-0 Trim guard BH900CE or CS used a different door, hinge & pin: 0--0 Door 0--0 Hinge kit 0-6-0 Pivot pin set
CME006R Service Parts BH60 Ice Storage Bin Z Brackets are used when attaching CME6 or CME66 to bin. Attaching screw pn: 0-6-0 Gasket: 0-69-, order number of feet needed 6 6 8 0 9 Item Part 0-69-0 Track 0-69-6 Window 0-69-0 Lower frame assembly 0-69-08 Left and right hinges 0-69-0 Door with door hinges 6 0-69-0 Right hinge 0-69-09 Ice gate 8 0-69- End plate guide (pair) 9 0-69- Screws for end plate 0 0-69- Plugs for end plate 0-69-0 Catch for ice gate 0-69- Ice gate retainer 0-69-06 Left hinge 0-69-0 Plastic drain KLPS Legs Not Illustrated: 0-69-8 Probe tool 0-69-9 Plastic Ice shovel. 0--0 Z brackets July 998 Page 8
Stacking Kit - KSCME6-LG-B CME006R Service Parts Kit Parts A9-00 Left Cutain Right Curtain 0-88-0 Harness -699-0 July 00 Page 9
CME006R Service Parts Single Phase Wiring Diagram -6-0 SLENID USE CPPER CNDUCTRS NL MT PUMP HARVEST BPASS SLENID BN R HT GAS SLENID DASHED LINES INDICATE FIELD WIRING WHICH MUST BE INSTALLED IN ACCRDANCE WITH THE NATINAL ELECTRICAL CDE AND ALL STATE AND LCAL CDES. WIRE CLR FR 08-0/60/ UNITS: BLACK WIRE CLR FR 0/0/ UNITS : BRWN W/R W/ LAD DUMP VALVE T B/W V V L T CNTACTR LINE TRANSFRMER W R BK/W PTENTIAL RELA T T TIME FF DELA RELA DUMP VALVE RELA L T THERM (PTINAL) SUMP TEMP. SENSR DISCHARGE TEMP. SENSR 6 BK 6 8 9 LW PRESSURE CNTRL W/R BN /W RUN CAP R/W FULL TRANSMITTER ELECTRNIC CNTRL BK BK START CAP FULL RECEIVER LEVEL SENSR CMMUNICATINS PRT THIS UNIT MUST BE GRUNDED. CAUTIN: MRE THAN NE DISCNNECT MEANS MA BE REQUIRED T DISCNNECT ALL PWER T THIS UNIT. HIGH PRESSURE CNTRL JUNCTIN BX GRUND SCREW EARTH GRUND PWER SUPPL SEE NAMEPLATE FR PRPER VLTAGE REQUIREMENTS AND MAXIMUM FUSE SIZE FAN REMTE CNDENSER CRANKCASE HEATER PRTECTR INTERNAL TERMINAL BX CMPRESSR BK T C T R T S R July 998 Page 0
CME006R Service Parts Single Phase Schematic Diagram L L CRANKCASE HEATER LINE V TRANSFRMER DUMP VALVE RELA TRIGGER HT GAS VALVE VALVE TIME FF DELA RELA STAT (PTINAL) LW PRESS. CNT. HIGH PRESS. CNT. HARVEST BPASS SLENID CNTACTR CIL ELECTRNIC CNTRL SUMP TEMP. DISCHARGE TEMP. FULL X-MIT FULL RCV. LEVEL SENSR DUMP VALVE RELA CNTACTS DUMP VALVE CNTACTR T PUMP PTENTIAL RELA CIL PTENTIAL RELA START CAP. RUN CAP. CMPRESSR REMTE CNDENSER FAN July 998 Page
CME006R Service Parts Three Phase Wiring Diagram -66-0 SLENID USE CPPER CNDUCTRS NL MT PUMP HARVEST BPASS SLENID BN W/ R HT GAS SLENID W/R DASHED LINES INDICATE FIELD WIRING WHICH MUST BE INSTALLED IN ACCRDANCE WITH THE NATINAL ELECTRICAL CDE AND ALL STATE AND LCAL CDES. LAD DUMP VALVE B/W V V L L W R BK/W L LINE TRANSFRMER DUMP VALVE RELA T T T THERM (PTINAL) BK SUMP TEMP. SENSR 6 8 9 LW PRESSURE CNTRL DISCHARGE TEMP. SENSR FULL TRANSMITTER 6 ELECTRNIC CNTRL HIGH PRESSURE CNTRL BK BK FULL RECEIVER LEVEL SENSR CMMUNICATINS PRT THIS UNIT MUST BE GRUNDED. CAUTIN: MRE THAN NE DISCNNECT MEANS MA BE REQUIRED T DISCNNECT ALL PWER T THIS UNIT. JUNCTIN BX GRUND SCREW L L L R BK EARTH GRUND PWER SUPPL SEE NAMEPLATE FR PRPER VLTAGE REQUIREMENTS AND MAXIMUM FUSE SIZE FAN REMTE CNDENSER TERMINAL BX CRANKCASE HEATER PRTECTR INTERNAL CMPRESSR BK R TI C T T S R July 998 Page
CME006R Service Parts Three Phase Schematic Diagram L L L LINE V TRANSFRMER DUMP VALVE RELA TRIGGER HT GAS VALVE VALVE STAT (PTINAL) LW PRESS. CNT. HIGH PRESS. CNT. HARVEST BPASS SLENID CRANKCASE HEATER CNTACTR CIL ELECTRNIC CNTRL SUMP TEMP. DISCHARGE TEMP. FULL X-MIT FULL RCV. LEVEL SENSR DUMP VALVE RELA CNTACTS DUMP VALVE PUMP CNTACTR T CMPRESSR T T REMTE CNDENSER FAN July 998 Page
Bulletin Number: PS - - 00 Bulletin Date: April 00 SERVICE LLETIN Subject: Controller Cover Affects all versions of models: CME6, CME66, CME86 and CME006 The above models are now manufactured with a sheet metal cover over the top of the controller. Service controllers also are now shipped with a cover that should be applied to these models whenever replacing the controller if the machine does not already have a cover installed. Whenever cleaning or servicing any unit, check to see whether it has a cover over the controller like the one shown below. If it does not, Scotsman recommends installing a cover. A separate part is now available for this purpose. Its part number is A80-0. It mounts over the top end of the controller and is secured by two sheet metal screws. Use the cover as a template and drill two /8 holes for the two screws. Controller Cover Cover Installed on Unit Scotsman is shipping a supply of covers to all Scotsman Distributors and listed service agencies. A supply of covers should be carried by each service person on service calls so a cover may be installed on the unit being cleaned or serviced if one is not already in place. Additional covers may be obtained free of charge from Scotsman, through the local Scotsman Distributor, as needed.