Unidirectional Flow Control DRV Technical data - Body: Aluminium - Seals: NBR - Springs: Stainless steel - Internal parts: Brass OT58 - Operating pressure: 2 to 10 bar (DRV75B, DRV100B: vacuum 0.2 to 10 bar) - Temperature range: Max. +60 C (DRV 75B, DRV100B: -20 C to +80 C) - Suitable fl uids: 50 µm fi ltered, lubricated or non lubricated air Nom. flow rate 6 to 5 bar max. Nl/min A B C D E F Ø max. G H J K 1-2 2-1 60 130 25 18 12 15 12 4.5 27 11 / 12 M10x0.75 M5 DRV05B 60 450 32 23 16.8 22 13 4.5 35 15 M12x0.75 G 1/8 DRV10 300 600 40 30 22 32 22 4.5 35 15 M12x0.75 G 1/4 DRV25 600 1100 56 43 27 42 27 6.5 43 24 M18x1 G 3/8 DRV37 600 1400 56 43 27 42 27 6.5 43 24 M18x1 G 1/2 DRV50 4400 4400 94 76 34 68 65 7 75 32 M22x1.5 G 3/4 DRV75B 4400 4400 94 76 40 68 95 7 77 32 M22x1.5 G 1 DRV100B DRV DRV05B DRV10-100B Pneumatic-Catalogue-GB-09/05 723
Bidirectional Flow Control DV DV: Bidirectional Flow Control - Body: Aluminium - Seal: NBR - Spring: Stainless steel - Internal parts: Brass OT58 - Operating pressure: 2 to 10 bar - Max. temperature: 60 C - Suitable fl uids: 50 µm fi ltered, lubricated or not lubricated air DV Nom. flow rate 6 to 5 bar max. Nl/min A B C D E F Ø max. G H J K 60 450 32 23 16.8 22 13 4.5 35 15 M12x0.75 G 1/8 DV10 300 600 40 30 22 32 22 4.5 35 15 M12x0.75 G 1/4 DV25 600 1100 56 43 27 42 27 6.5 43 24 M18x1 G 3/8 DV37 600 1400 56 43 27 42 27 6.5 43 24 M18x1 G 1/2 DV50 724 Pneumatic-Catalogue-GB09/05
Unidirectional Flow Control FCRG / N / Z FCRG/N: Unidirectional Flow Control with Slot Adjustment (exhaust or supply), metered out, G and NPTF Threads for pneumatic use - Internal turned parts: Brass - External turned parts: Zink plated brass - Plating: Galvanic zink - Springs: Stainless steel - Stamped parts: Stainless steel - Plastic parts: PA or not lubricated - Sealing elements: NBR - Suitable fl uids: Compressed air, lubricated Exhaust Supply - Operating pressure: 1 to 10 bar - Temperature ranges: -10 to +70 C flow flow Number of turns Number of turns flow from 1 to 2 with throttle closed (SPM) p1 = 6 bar p2 = 5 bar M5 G1/8 G1/4 G3/8 G1/2 10-32UNF 1/8NPTF 1/4NPTF 3/8NPTF 1/2NPTF 31 185 340 978 1423 Code Threads A, D B C Max. tightening torque Nm 0FCRG M5 8 21 1,5 0FCRN 10/32 UNF 8 21 1,5 1FCRG 1/8" G 13 32 10 1FCRN 1/8" NPTF 13 32 15 2FCRG 1/4" G 17 41 12 2FCRN 1/4" NPTF 17 41 20 3FCRG 3/8" G 22 47 20 3FCRN 3/8" NPTF 22 47 30 4FCRG 1/2" G 27 58 30 4FCRN 1/2" NPTF 27 58 40 Code Threads A, D B C Max. tightening torque Nm 0FCRG-Z M5 8 21 1,5 1FCRG-Z 1/8" G 13 32 10 2FCRG-Z 1/4" G 17 41 12 Unidirectional Flow Control Screwdriver regulated (exhaust) FCRG / N Unidirectional Flow Control Screwdriver regulated (supply) Exhaust Control FCRG-Z Supply Control Pneumatic-Catalogue-GB-09/05 725
Unidirectional Pressure Regulator NPRPG NPRPG: Relieving Pressure Regulator (exhaust) for Valve Mounting with Push-In Fitting for pneumatic use - Internal turned parts: Brass - External turned parts: Zink plated brass - Plating: Galvanic zink - Springs: Stainless steel - Stamped parts: Stainless steel - Plastic parts PA - Sealing elements: NBR - Suitable fl uids: Compressed air, lubricated or not lubricated - Primary pressure: 1 to 16 bar - Secondary pressure: 1 to 8 bar - Temperature ranges: -10 C to 70 C Relieving Pressure Regulator with NPTF Threads on request Relieving Pressure Regulator whit optional secondary pressure available on request Flow characteristics from 1 to 2, p 1 = 7 bar adjustment with lock nut NPRPG Unidirectional Pressure Regulator (exhaust) E Ø Thread A G B Cmax Max. tightening torque Nm 4 1/8" 17 73 10 NPRPG-004-000 6 1/8" 17 73 10 NPRPG-006-000 8 1/8" 17 73 10 NPRPG-008-000 6 1/4" 17 81 12 NPRPG-006-001 8 1/4" 17 81 12 NPRPG-008-001 10 1/4" 17 81 12 NPRPG-010-001 8 3/8" 22 88 20 NPRPG-008-002 10 3/8" 22 88 20 NPRPG-010-002 726 Pneumatic-Catalogue-GB09/05
0,0 Unidirectional Push-In Flow Control Unidirectional Push-In Flow Control for Cylinder Mounting for pneumatic use N135C: Screwdriver Control N136C: Control Knob - Body: Brass, Nickel plated - ocking ring: Stainless Steel for - easy pipe insertion - high holding force - damageless extraction - Screws: Stainless Steel - Adjustment needle: Brass - Release sleeve: POM - Gaskets: NBR - For externally calibrated tubes: 4, 5, 6, 8, 10, 12 OD, according to CETOP RP54P, NFE49-100/101 - Cylindrical threads: With Nylon washer - Max. working pressure: 18 bar at 20 C (for PA11 tube) - For tubes made from: PA11 (Nylon), PU, PE, PTFE - Temperature range: -20 to 80 C Fitting Series N = Metric Pneumatic-Catalogue-GB-09/05 N 135C - 006-001 Thread Size 135C = Screwdriver Control 136C = Control Knob Tube Size 004 = 4 005 = 5 006 = 6 008 = 8 010 = 10 012 = 12 Thread Size 000 = 1/8" 001 = 1/4" 002 = 3/8" 005 = M5 Tube T Thread D H 1max. 2 3 1 Ø F N135C-004-005 4 M5 10,0 12,5 24,5 19,0 5,5 8 6 N135C-004-000 4 G 1/8" 10,0 12,5 30,0 20,2 7,0 14 9 N135C-005-005 5 M5 11,0 13,0 24,5 20,0 5,5 8 6 N135C-005-000 5 G 1/8" 11,0 13,0 30,0 20,6 7,0 14 9 N135C-006-005 6 M5 12,0 13,0 24,5 20,6 5,5 8 6 N135C-006-000 6 G 1/8" 12,0 13,5 30,0 20,6 7,0 14 9 N135C-006-001 6 G 1/4" 12,0 13,5 36,5 22,6 9,0 17 9 N135C-008-000 8 G 1/8" 15,0 16,0 30,0 23,8 7,0 14 9 N135C-008-001 8 G 1/4" 15,0 16,0 36,5 25,8 9,0 17 9 N135C-008-002 8 G 3/8" 15,0 16,0 41,0 30,0 9,0 19 11 N135C-010-001 10 G 1/4" 18,0 17,0 36,5 27,1 9,0 17 9 N135C-010-002 10 G 3/8" 18,0 17,0 41,0 31,0 9,0 19 11 N135C-012-001 12 G 1/4" 20,0 19,0 36,5 31,5 9,0 17 9 Tube T Thread D H max. 2 3 1 Ø F N136C-004-005 4 M5 10,0 12,5 35,0 19,0 5,5 8 6 N136C-004-000 4 G 1/8" 10,0 12,5 45,0 20,2 7,0 14 9 N136C-005-005 5 M5 11,0 13,0 35,0 20,0 5,5 8 6 N136C-005-000 5 G 1/8" 11,0 13,0 45,0 20,6 7,0 14 9 N136C-006-005 6 M5 12,0 13,0 35,0 20,6 5,5 8 6 N136C-006-000 6 G 1/8" 12,0 13,5 45,0 20,6 7,0 14 9 N136C-006-001 6 G 1/4" 12,0 13,5 52,0 22,6 9,0 17 9 N136C-008-000 8 G 1/8" 15,0 16,0 45,0 23,8 7,0 14 9 N136C-008-001 8 G 1/4" 15,0 16,0 52,0 25,8 9,0 17 9 N136C-008-002 8 G 3/8" 15,0 16,0 58,0 30,0 9,0 19 11 N136C-010-001 10 G 1/4" 18,0 17,0 52,0 27,1 9,0 17 9 N136C-010-002 10 G 3/8" 18,0 17,0 58,0 31,0 9,0 19 11 N136C-012-001 12 G 1/4" 20,0 19,0 52,0 31,5 9,0 17 9 Nl / min up to 4 bar 700,0 600,0 500,0 400,0 300,0 200,0 100,0 0,5 1,5 2,5 3,5 4,5 5,5 6,5 7,5 8,5 9,5 10,5 11,5 12,5 Turnings of adjustment screw for Screwdriver N135C with Control Knob N136C M5 1/8 1/4 3/8 727
Distributing Blocks DB: Distribution Blocks - Outgoing ports per block: Max. 8 - Input port sizes: G 1/8, G 1/4 - Body: Aluminium, anodized DBA Distributing Block, max. 6 Ports to 1 Side Port A Port B C D E F G H J K M Quantity Size Quantity Size 3 G1/8 2 G1/4 91,0 30,0 30,5 30,0 15,5 4,5 5,0 30,0 20,0 - DBA213G 4 G1/8 2 G1/4 121,0 60,0 30,5 30,0 15,5 4,5 5,0 30,0 20,0 - DBA214G 5 G1/8 2 G1/4 151,0 90,0 30,5 30,0 15,5 4,5 5,0 30,0 20,0 - DBA215G 6 G1/8 2 G1/4 181,0 120,0 30,5 30,0 15,5 4,5 5,0 30,0 20,0 - DBA216G 3 G1/4 2 G3/8 110,0 36,0 37,0 36,0 19,0 6,0 6,5 30,0 20,0 19,0 DBA323G 4 G1/4 2 G3/8 146,0 72,0 37,0 36,0 19,0 6,0 6,5 30,0 20,0 19,0 DBA324G 5 G1/4 2 G3/8 182,0 108,0 37,0 36,0 19,0 6,0 6,5 30,0 20,0 19,0 DBA325G 6 G1/4 2 G3/8 218,0 144,0 37,0 36,0 19,0 6,0 6,5 30,0 20,0 19,0 DBA326G DBB Distributing Block, max. 8 Ports to 2 Sides Port A Port B C D E F G H J K Quantity Size Quantity Size Code 4 G1/8 2 G1/4 61,0 50,0 5,5 30,0 15,5 4,5 5,0 30,0 20,0 DBB212G 6 G1/8 2 G1/4 91,0 30,0 30,5 30,0 15,5 4,5 5,0 30,0 20,0 DBB213G 8 G1/8 2 G1/4 121,0 60,0 30,5 30,0 15,5 4,5 5,0 30,0 20,0 DBB214G 4 G1/4 2 G3/8 74,0 61,0 6,5 36,0 19,0 6,0 6,5 40,0 20,0 DBB322G 6 G1/4 2 G3/8 110,0 36,0 37,0 36,0 19,0 6,0 6,5 40,0 20,0 DBB323G 8 G1/4 2 G3/8 146,0 72,0 37,0 36,0 19,0 6,0 6,5 40,0 20,0 DBB324G DBC Distributing Block, 4 Ports Port A Quatity Size B C D E F Code 4 M5 20.0 12.0 12.0 4.5 10.0 DBC014G 4 G1/8 30.0 23.0 22.0 4.5 16.0 DBC114G 4 G1/4 40.0 30.0 27.0 5.5 20.0 DBC214G 4 G3/8 50.0 38.0 39.0 6.5 25.0 DBC314G 4 G1/2 50.0 38.0 39.0 6.5 25.0 DBC424G 728 Pneumatic-Catalogue-GB09/05
ogic Elements ORDG, ANDG, NADG, YADG ogic Elements - Push-In fi ttings for tube: 4 dia. - Mountable: On bracket - Body: Aluminium - Springs: Stainless steel - Seals: NBR - Internal parts: Brass - Orifi ce diameter: 2,5 - Operating pressure: 2 to 10 bar - Nominal fl ow at 6 bar: 100 Nl/min - Temperature range: -10 C to 60 C - Medium: 50 µm fi ltered, lubricated or non-lubricated air Symbols Function Weight kgs A B C D E F G Ø G1 ORDG ANDG OR 0,040 30,0 14,0 7,0 12,0 9,0 3,7 4,5 M4 ORDG AND 0,040 30,0 14,0 7,0 12,0 9,0 3,7 4,5 M4 ANDG NADG YADG ORDG ANDG Symbols Function Weight kgs A B C D E F G NADG YADG UND 0,130 30,0 46,9 7,0 15,0 7,5 3,7 M4 NADG & Shuttle Valves / ogic Elements OA22-1, RRV10 UND 0,130 30,0 46,9 7,0 15,0 7,5 3,7 M4 YADG - Ports: G 1/8 and 1/8 NPTF - Temperature range: -20 C to 90 C - Medium: Compressed air - Pressure range: Vacuum 0.5 to 10 bar Symbols Function Weight kgs A B C D E F G Ports OR 0,060 49 24 19 32 23 22 5,1 1/8 NPTF OA22-1 OR 0,080 51,5 25,75 16,2 20-23,6 4,5 G 1/8 RRV10 OA22-1 RRV10 OA22-1 RRV-10 Pneumatic-Catalogue-GB-09/05 729
Universal Quick Connectors Universal Quick Connectors made of Nickel Plated Brass: N800 Series for pneumatic use - Body: Brass, nickel plated - Function: Single shut-off - Plugs: DN 5,0 / Italian standard - Universal couplings: 6 stainless steel balls locking system Compatible with plugs refering to: DN 2,5 / UNI ISO 6150 A-6 DN 5 / MIGNON DN 5 / Italian standard DN 5,5 / UNI ISO 6150 B-12 DN 5,5 / UNI ISO 6150 C-10 DN 5,5 / Swiss standard DN 7,5 / German standard DN 9 / UNI ISO 6150 B-15 - Seals: NBR seals - Working pressure: 0-16 bar - Temperature ranges: 0-80 C, with dry air -20 C SFERE BAS N811 Universal Coupler, Conical Thread ØD External Thread R D 1 1/4 12 8 52 19 N811-001 3/8 12 8 52 19 N811-002 1/2 12 10 50 22 N811-003 1 730 Pneumatic-Catalogue-GB09/05
Internal Thread D 1 N812-001 G 1/4 12 10,5 52,7 19 N812-002 G 3/8 12 10,5 52,7 19 Universal Quick Connectors Universal Coupler, Female Thread N812 1 ØD Tube Ø 1 N813-006 6x4 75 130 19 12 N813-008 8x6 90 144,5 19 14 N813-010 10x8 90 144,5 19 16 1 Universal Coupler with Tube Clamper N813 1 1 External Thread 1 D N821-001 G 1/4 8,4 37,6 4,9 14 N821-002 G 3/8 9,3 39,1 4,9 19 N821-003 G 1/2 10,3 40,6 4,9 24 Quick Coupling Plug, Cylindric Thread N821 ØD 1 Internal Thread 1 D N822-001 G 1/4 10 38,6 4,9 17 N822-002 G 3/8 10 40,6 4,9 19 Quick Coupling Plug, Female Thread N822 1 ØD Tube Ø 1 N823-006-004 6x4 80 116 12 13 N823-008-006 8x6 75 113 12 13 N823-010-008 10x8 90 129 14 14 1 Quick Coupling Plug with Tube Clamper N823 1 1 Pneumatic-Catalogue-GB-09/05 731
R Ball Valves Ball Valves KMA, KMI (Miniature) KHI Execution: 2/2 ways 2/2 ways Body: Brass, chrome plated Brass, chrome plated Ball: Brass, nickel plated Brass, nickel plated Ball gasket: PTFE (Tefl on) PTFE (Tefl on) O-ring: NBR (Perbunan) NBR (Perbunan) ever: PA GG + GF (Nylon) Steel Operating pressure: 15 bar max. 50 bar max. (1/4 ) to 25 bar max (2 ) Temperature range: -10 C to +90 C -15 C to +150 C Suitable fl uids: Air, hot water, gasoline, Air, hot water, steam, gasoline, fuel, gas-oil, kerosene, fuel, gas-oil, kerosene, different oils different oils KMI Miniature Ball Valve Female, black ever Threads R 1 F T A H G 1/8 21 39 9 22 6 38 KMI10 G 1/4 21 39 9 22 8 38 KMI25 G 3/8 21 42 9 22 8 38 KMI37 G 1/2 25 47 10.5 22 10 42 KMI50 G 3/4 30 54 10.5 22 12 46 KMI75 KMA Miniature Ball Valve Male/Female, black ever Threads R F T A H G 1/8 21 39 9 22 6 38 KMA10 G 1/4 21 39 9 22 8 38 KMA25 G 3/8 21 40 9 22 8 38 KMA37 G 1/2 25 45 10.5 22 10 42 KMA50 G 3/4 30 51 10.5 22 12 46 KMA75 KHI Ball Valve Female with Threads A B C D E F G CH red ever R G 1/4 51 25.5 40 80 10 25.5 25.5 18 KHI25 G 3/8 60 25.5 40 80 10 30 30 21 KHI37 G 1/2 75 32.5 50 89 15 37.5 37.5 25 KHI50 G 3/4 80 42 59 113 20 40 40 31 KHI75 G 1 90 49.5 63 113 25 45 45 40 KHI100 G 1 1/4 110 59.5 77 138 32 55 55 49 KHI125 G 1 1/2 120 72 91 158 40 60 60 54 KHI150 G 2 140 86 97 158 50 70 70 68.5 KHI200 732 Pneumatic-Catalogue-GB09/05