NILplus urinal flushers for concealed and exposed installation Urinal flushers and urinal inlet-bows Accessories for urinal flushers Page PDF Free Download

NIL NILplus WC flushers for concealed and exposed installation WC flushers for normal and low-pressure applications WC flusher sets Flush pipes and accessories for WC flushers Supply stops Page 1-9 Product Catalogue NILplus urinal flushers for concealed and exposed installation Urinal flushers and urinal inlet-bows Accessories for urinal flushers Page 10-13 Table of Contents Self-closing straight-way valves for shower systems NILplus water-saving shower sets Page 14-18 Accessories for shower sets Foot-spraying equipment for exposed and semi-concealed installation Design angle valve series NILplus angle valves with and without your personal company's logo NILplus slanted seat valves Page 19-23 Combined angle valves Hose-taps Slanted-seat hose taps Draw-off taps Pipe ventilation devices Anti hose-burst devices Accessories for combined angle valves Frost-proof draw-off taps Page 24-31 Concealed valves (with internal threads or soldering connections) Accessories for concealed valves Page 32-36 Threaded nipples Reduction pieces Pipe couplings Angled couplings T - couplings Forked fittings Wall unions Page 37-43 Compression fittings ELB - compression fittings Screw fittings Threaded rosettes Sliding rosettes Page 44-47 Copper pipes Coils of copper pipes Flexible connection hoses Page 48-53 ( hygienically tested and non-twistable) 03/2009 Friedrich Gampper KG Fichtestrasse 8 71540 Murrhardt Germany Fon + 49-7192 - 971-0 Fax + 49-7192 - 971-105 mail: info@nil-gampper.de web: www.nil-gampper.de

High Quality Materials and Manufacturing Methods Material Quality NIL fittings are generally made of hot-pressed brass manufactured according to German industrial standards. Consequently they meet the demands of highest quality in respect of solidity and water-tightness. Body sections made by the chilled casting method are subjected to a particularly stringent water-tightness test. Finish NIL fittings which are visible after installation are given a special surface finish: Brass, which is ground, polished and either nickel- or chrome-plated. The non-visible parts of fittings for concealed installation have either a matt finish, or can be nickel- or chrome-plated according to individual requirements. Certain NIL fittings are also available, on request, in sanitary colors. Food Laws NIL fittings conform to existing food laws, even if other production materials are employed (seals, etc.). DIN Conformity NIL fittings conform to DIN standards, as far as these are applicable. Such standards relate to dimensions, hydraulic function and noise levels. Fittings tested according to these standards are marked accordingly. A continuous quality of all NIL products guarantees the highest quality standard possible. 3 Years Warranty Decades of experience in the manufacture of high-quality sanitary fittings and clear and well thought-out designs combined with the most up-to-date production and quality control methods guarantee the high quality standards of all NIL fittings. We give the following warranty on all NIL fittings: 3 Years Warranty commencing from the date of delivery. Should during this period under normal circumstances, defects arise due to a material or production fault, then the defective fitting will either be repaired at our factory or replaced free-of-charge. This warranty does not cover the following: 1. Defects arising due to incorrect installation, usage, unauthorized repair or frost-damage. 2. Malfunctioning due to dirt in the water mains. 3. Indirect claims for damages which occur as the result of a defective fitting. Adherence to prevailing regulations and correct handling of NIL fittings will guarantee you years of troublefree usage. Your Advantage - The Wide Range of Reliable NIL Fittings

NILplus Toilet Flusher With Self-Cleaning Jet Bore WC - Flusher Model: NILplus 2001 DN 20 3/4" 2001 Din 3265 - Test registration no. DIN DVGW 449 DIN 4109 - Test registration no. DN 20 3/4" 2001-01 P - IX 2716 / I Group of Fittings I Polishedchrome / velourschrome Polishedchrome / velourschrome Polishedchrome / white With NILplus automatic flush system DN 20 3/4" 2001-51 white and individual flush control Flow-pressure 1.2-4.0 bar Outlet pipe according to DIN 3265 for flush-pipe ø 28 x ø 26 mm, incl. wall rosette ø 67 mm Suitable for wash-out and wash-down WC s German patent no. 3 427 336 German design reg. 363 Flush volume and flush rate adjustable!!! Spare / Replacement parts: 2001/10K Cap and outlet nut (velours-chrome parts are non-returnable) velourschrome WC - Flusher Set model: NILplus 2001 DN 20 3/4" 2001S consisting of: WC - flusher model: NILplus 2001 + brass flus pipe ø 28 x ø 26 x 600 x 200 mm, straight type, chrome-plated + WC - connector ø 55 mm for pedestal WC 1

NIL Toilet Flusher With Self-Cleaning Jet Bore WC - Flusher Model: NILplus 2002 DN 20 3/4" 2002 DIN 3265 - Test registration no. 1032 DIN 4109 - Test registration no. DN 20 3/4" 2002-01 P - IX 3597 / II Polishedchrome / velourschrome Polishedchrome / velourschrome Polishedchrome / white Group of Fittings II With NILplus automatic flush system and individual flush control Flow-pressure 1.2-4.0 bar Outlet pipe according to DIN 3265 for flush pipe ø 28 x ø 26 mm, incl. wall rosette ø 67 mm Suitable for wash-out and wash-down WC s Flush volume and flush rate adjustable!!! WC - Flusher Set model: NILplus 2002 DN 20 3/4" 2002S1 consisting of: Polishedchrome / white WC - flusher model: NILplus 2002 + white plastic flush-pipe ø 28 x ø 26 x 700 x 250 mm, straight type + WC - connector ø 55 mm for pedestal WC WC - Flusher Set model: NILplus 2002 DN 20 3/4" 2002S2 consisting of: WC - flusher model: NILplus 2002 + brass flush-pipe, ø 28 x ø 26 x 600 x 200 mm straight type, chrome-plated + WC - connector ø 55 mm for pedestal WC 2

Toilet Flusher WC - Flusher Model: D 69 DN 20 3/4" 122 chrome- DIN 3265 - Test registration no. plated DIN DVGW 514 Testing applied for DIN EN 12541 for WC and urinal flusher Flow pressure 1.2-4.0 bar Solder fitting according to DIN 3265 for flush pipe ø 28 x ø 26 mm Suitable for wash-out and wash-down WCs Flush volume and flush rate adjustable!!! WC - Flusher Set model: NIL D 69 DN 20 3/4" 122S1 consisting of: Flush pipe: white WC - flusher model: NIL D 69 + white plastic flush-pipe, ø 28 x ø 26 x 700 x 250 mm, straight type + WC - connector ø 55 mm for pedestal WC WC - Flusher Set model: NIL D 69 DN 20 3/4" 122S2 consisting of: WC - flusher model: NIL D 69 + brass flush-pipe ø 28 x ø 26 x 600 x200 mm, straight type, chrome-plated + WC - connector ø 55 mm for pedestal WC 3

Toilet Flusher also for Low-Pressure Applications and Seawater WC - Flusher Model: D 69-3/4" DN 20 3/4" 122-ND chromefor low-pressure applications plated Flow pressure: 0.6-2.5 bar Solder fitting, flush pipe ø 30 x ø 28 mm ø 32 x 30 mm Suitable for wash-down and siphonic WC s WC - Flusher Model: A 32-1" DN 25 1" 310 chromefor low-pressure applications plated Flow pressure 0.4-2.0 bar Solder fitting, flush pipe ø 32 x ø 30 mm DN 25 1" 311 Suitable for wash-down and siphonic Sea-water WC s, WC systems with water proof supplied from header tanks. WC systems on ships (Sea-water proof version) 4

Accessories for Toilet Flushers Flush Pipes for WC Flushers DN 20 3/4" Brass ø 28 x ø 26 x 600 x 200 mm straight 160 ø 28 x ø 26 x 600 x 200 mm, 45 mm cranked 161 ø 28 x ø 26 x 600 x 200 mm, 85 mm cranked 162 ø 28 x ø 26 x 600 x 250 mm straight 163 ø 28 x ø 26 x 600 x 250 mm, 45 mm cranked 164 ø 28 x ø 26 x 600 x 250 mm, 85 mm cranked 165 ø 28 x ø 26 x 700 x 200 mm straight 166 ø 28 x ø 26 x 700 x 200 mm, 45 mm cranked 167 ø 28 x ø 26 x 700 x 200 mm, 85 mm cranked 168 ø 28 x ø 26 x 700 x 250 mm straight 169 ø 28 x ø 26 x 700 x 250 mm, 45 mm cranked 170 ø 28 x ø 26 x 700 x 250 mm, 85 mm cranked 171 Angled flush pipes ø 28 x ø 26 mm, 45 204 ø 28 x ø 26 mm, 90 191 ø 28 x ø 26 mm, 130 203 Flush Pipe Extensions ø 28 x ø 26 x 250 mm long 192 ø 28 x ø 26 x 500 mm long 193 Flush Pipes for WC Flushers DN 20 3/4" Plastic, white or black ø 28 x ø 26 x 700 x 250 mm straight 172 white/black ø 28 x ø 26 x 700 x 250 mm, 40 mm cranked 173 white/black ø 28 x ø 26 x 700 x 250 mm, 85 mm cranked 184 white/black Angled flush pipes ø 28 x ø 26 mm, 45 194 white/black ø 28 x ø 26 mm, 90 195 white/black ø 28 x ø 26 mm, 130 196 white/black Flush Pipe Extensions ø 28 x ø 26 x 250 mm long 197 white/black ø 28 x ø 26 x 500 mm long 198 white/black 5

Accessories for Toilet Flushers Flush Pipes for WC Flushers DN 25 1" Brass ø 30 x ø 28 x 600 x 200 mm straight 182 ø 32 x ø 30 x 600 x 200 mm straight 174 ø 32 x ø 30 x 600 x 200 mm cranked 175 ø 32 x ø 30 x 600 x 250 mm straight 176 ø 32 x ø 30 x 600 x 250 mm cranked 177 ø 32 x ø 30 x 700 x 200 mm straight 178 ø 32 x ø 30 x 700 x 200 mm cranked 179 ø 32 x ø 30 x 700 x 250 mm straight 180 ø 32 x ø 30 x 700 mm straight, for 183 squatting type WC ø 32 x ø 30 x 1000 mm straight, for 205 squatting type WC Flush Pipes for WC Flushers DN 25 1" Plastic, white or black ø 32 x ø 30 x 700 x 200 mm straight 199 white/black ø 32 x ø 30 x 700 x 200 mm, 65 mm 201 white/black cranked Flush Pipe Clamp 189 for flush pipe ø 28 mm, for distance from wall of 15-85 mm, incl. masonry plug as above 189-51 white Connecting Bush 190 for flush pipe ø 28 x ø 26 mm Compression fitting between flusher outlet pipe and flush pipe WC - Connector for flush pipe ø 28 x ø 26 mm and ø 32 x ø 30 mm, for WC - inlet ø 48 mm (old type) 185 as above, however with chrome-plated rosette 186 WC - Connector for flush pipe ø 28 x ø 26 mm and ø 32 x ø 30 mm, for WC - inlet ø 55 mm (Euro - Norm) 187 as above, however with chrome-plated rosette 188 6

Toilet Flusher for Concealed Installation - With Self-Cleaning Jet Bore WC Flusher for concealed installation Model: NILplus 2001 DIN 3265 - Test registration no. DIN DVGW 449 DIN 4109 - Test registration no. P - IX 2716 / I Group of fittings I With NILplus automatic flush system and individual flush control Flow pressure 1.2-4.0 bar Outlet pipe according to DIN 3265 for flush pipe ø 28 x ø 26 mm Suitable for wash-out and wash-down WC s DN 20 3/4" 2001UP Concealed part Scope of delivery: WC flusher with 3/4" screw connection; sound-proof installation case 214 x 180 x 83 mm deep; temporary polystyrene cover for installation case, concealed flush pipe ø 28 x ø 26 mm. Suitable for water inlet fittings ø 45 mm for wallmounted WC (order-no. 248/2), or for pedestal WC (order-no. 248/1). Height adjustment range: 600 ± 20 mm Polystyrene jacket, temporary polystyrene covers for inlet fittings. Excluding cover plate, operating button and water inlet fittings. Please order separately before completion. Cover plate Cover Plate 2500 Incl. Operating button for concealed flusher model: NILplus 2001, installation frame and fixing screws. Brushed stainless steel Concealed flush pipe 248 ø 28 x ø 26 mm Height adjustment range: 600 ± 20 mm Polystyrene jacket, temporary polystyrene cover (PLEASE NOTE: The concealed flush pipe is already included in the scope of delivery of the flusher 2001UP. If otherwise required, you may also order it separately). Water inlet fitting for pedestal WC 248/1 White Inlet pipe ø 45 mm, 300 mm long, WC - connector, wall rosette Not included in the scope of delivery of the above flusher model: 2001UP! Please order separately before completion! Water supply fitting for wall mounted WC 248/2 White Inlet pipe ø 45 mm, 180 mm long, WC - connector Not included in the scope of delivery of the above flusher model: 2001UP! Please order separately before completion! 7

Toilet Flusher for Concealed Installation - With Self-Cleaning Jet Bore WC flusher for concealed installation DN 20 3/4" 320 Model: UPD 32 Flow pressure: 1,2-5,0 bar Suitable for wash-out and wash-down WC s Optional installation to the left or right side Scope of delivery: WC flusher with 3/4" screw connection, installation case size: 100 x 122 x 66 mm (wxhxd) Temporary polystyrene cover for installation case Suitable for water inlet fittings ø 45 mm for wallmounted WC (order-no. 248/2) or pedestal WC (order-no. 248/1) Including cover plate, and operating button Concealed flush pipe 248 ø 28 x ø 26 mm Height adjustment range: 600 ± 20 mm Polystyrene jacket, temporary polystyrene cover (PLEASE NOTE: The concealed flush pipe is already included in the scope of delivery of the flusher 2001UP. If otherwise required, you may also order it separately). Water inlet fitting for pedestal WC 248/1 White Inlet pipe ø 45 mm, 300 mm long, WC - connector, wall rosette Not included in the scope of delivery of the above flusher model: 2001UP! Please order separately before completion! Water supply fitting for wall mounted WC 248/2 White Inlet pipe ø 45 mm, 180 mm long, WC - connector Not included in the scope of delivery of the above flusher model: 2001UP! Please order separately before completion! 8

Supply - Stops for Flushers Supply stop model 54, 3/4" and 1/2" DN 20 3/4" 520 for external pipework with wall union DN 15 1/2" 521 Supply stop model 59, 1" DN 25 1" 540 for external pipework Supply stop model 54, 3/4" and 1/2" DN 20 3/4" 620 for concealed pipework with threaded rosette DN 15 1/2" 621 Supply stop model 54 S, 3/4" DN 20 3/4" 622 for concealed pipework and lateral connection of flusher Supply stop model 59, 1" DN 25 1" 640 for concealed pipework with threaded rosette 9

Urinal Flushers - With Self-Cleaning Jet Bore Urinal Flusher Model: NILplus 2003 DN 15 1/2" 2003 DIN 3265 - Test registration no. DIN DVGW 768 velourschrome Polishedchrome / velourschrome With NILplus automatic flush system Flow pressure 1.2-4.0 bar Flush quantity: constant 3 ± 0.5 l Wall rosette 48 mm wide x 55 mm high Flush pipe ø 18 mm and urinal connector (internal type) Application: all standard urinal bowls Urinal Flusher Model: NILplus 2003A DN 15 1/2" 2003A as above, however with supply stop Spare / Replacement parts: 2003/10K Cap and outlet nut (velours-chrome parts are non-returnable) Polishedchrome / velourschrome 10

Urinal Flushers - Urinal Inlet Bows Urinal Flusher Model: DK 78 DN 15 1/2" 450 Push-button operated Automatic flushing-time and -volume, flush pipe ø 18 mm and wall rosette Flow pressure 1.0-4.0 bar Application: standard urinal bowls (small flush volume) and siphonic urinal bowls (large flush volume) no. 450: incl. Internal urinal connector Urinal Flusher Model: DK 78 DN 15 1/2" 455 as above, however with supply stop no. 455: incl. Internal urinal connector Urinal Flusher Model: D 69 DN 15 1/2" 430 Flush pipe ø 18 mm and wall rosette Flow pressure 1.0-4.0 bar Application: standard urinal bowls and siphonic urinal bowls no. 430: incl. Internal urinal connector Urinal inlet bow, 1/2" long type DN 15 1/2" 7450 incl. Sliding rosette Outlet thread 1/2" Copper pipe ø 14 mm, 200 mm long 11

Accessories for Urinal Flushers Flush Pipes for Urinal Flusher Model: NILplus 2003 Made of copper Pipe ø 18 x ø 16.5 x 190 mm, straight 2003/8 Pipe ø 18 x ø 16.5 x 300 mm, straight 2003/46 Pipe 25 mm cranked 2003/61 Pipe 30 mm cranked 2003/62 Pipe 40 mm cranked 2003/63 Pipe 50 mm cranked 2003/64 Flush Pipes for Urinal Flusher Model: DK 78 Made of copper Pipe ø 18 x ø 16.5 x 190 mm, straight 450/14 Pipe ø 18 x ø 16.5 x 300 mm, straight 450/46 Pipe 25 mm cranked 450/61 Pipe 30 mm cranked 450/62 Pipe 40 mm cranked 450/63 Pipe 50 mm cranked 450/64 Flush Pipes for Urinal Flusher Model: D 69 Made of copper Pipe ø 18 x ø 16.5 x 190 mm, straight 430/15 Pipe ø 18 x ø 16.5 x 300 mm, straight 430/46 Pipe 25 mm cranked 430/61 Pipe 30 mm cranked 430/62 Pipe 40 mm cranked 430/63 Pipe 50 mm cranked 430/64 Internal urinal connector 450/35 for flush pipe ø 18 mm, incl. Rosette Urinal inlet: vertical, from top External urinal connector 450/36 for flush pipe ø 18 mm, incl. Bell-shaped cover Urinal inlet: vertical, from top Urinal bell-shaped cover 450/37 for flush pipe ø 18 mm Urinal inlet: vertical, from top 12

Urinal Flusher for Concealed Installation Urinal Flusher for concealed installation Model: 2003UP DIN 3265 - Test registration no. DIN DVGW 768 With NILplus automatic flush system and individual flush control Flow pressure 1.2-4.0 bar Flush volume: constant 3 ± 1.0 l Concealed part Applications: All standard siphonic and normal urinal bowls with middle inlet at back, e.g. V&B: Colani, Omnia (Ebra), Omnia (Esta), Helios, Magnum, Stratos, Tiora, Viala Duravit: Ben, Bill Keramag: Monodet, Aller Ideal Standard: Tonga, Penta, Pindar, Parama Scope of delivery of parts required for 1st stage of installation: DN 15 1/2" 2003UP Cover plate Urinal flusher including screw connections with integrated supply stop on inlet and outlet sides. Inlet side at top 1/2" internal thread, outside at bottom 1/2" external thread. Concealed casing 162 x 162 x 73 mm including screws and plugs for fitting in wall recess or prefabricated wall sections. Temporary protective cover and polystyrene cover including fixing screws. Installation and operating instructions. Scope of delivery of parts required for 2nd stage of installation: 2510 Brushed stainless steel Cover plate including operting button. Fitting frame with fixing screws. Installation and operating instructions. Urinal inlet fitting for urinal flusher model: NILplus 2003UP Sliding connection, pipe, cap-nut, wall union, connection pipe 1/2" and urinal connector. The be used instaed of outlet screw fitting 1/2". Height adjustment: ± 15 mm. Suitable for urinal bowls with inlet at back. 445 raw Connecting pipe 1/2" with urinal connector 445/44K raw 13

Self - Closing Straight-Way Valves Self-closing straigh-way valves with adjustable operating time 1/2" internal thread on both sides DN 15 1/2" 700 1/2" external thread on both sides DN 15 1/2" 701 1/2" captive nut connection on both sides DN 15 1/2" 702 3/4" internal thread on both sides DN 20 3/4" 703 3/4" external thread on both sides DN 20 3/4" 704 3/4" captive nut connection on both sides DN 20 3/4" 705 Self-closing straight way valve with adjustable operating time, for concealed installation Concealed casing 120 x 96 x 66 mm deep, cover plate 150 x 125 mm, fixing screws, 1/2" captive nut connections. DN 15 1/2" 710 Self-closing straight way valve with preinstalled shower mixer tap DN 15 1/2" 720 Backflow-preventer, covered "S"-connectors 1/2", 3/4" external thread on bottom of straight way valve, completely pre-fixed 14

Self - Closing Straight-Way Valves Self-closing straight way valve with preinstalled shower tap mix-system, for concealed installation DN 15 1/2" 730 Backflow preventor, concealed casing 225 x 225 x 84 mm deep, cover plate 225 x 225 mm, fixing screws, "S"-connectors and 1/2" captive nut connections on the supply pipe, 1/2" captive nut connection on bottom, completely pre-fixed Self-closing straight way valve with preinstalled thermostatic mixer tap DN 15 1/2" 740 Backflow preventor, dirt filters, 38 C anti scalding feature, covered + lockable "S" connectors 1/2" on the supply pipe, 3/4" external thread on the bottom, completely pre-fixed Self-closing straight way valve with preinstalled thermostatic mixer tap, for concealed installation DN 15 1/2" 750 Backflow preventer, dirt filters, 38 C anti scalding feature, concealed casing 225 x 225 x 84 mm deep, cover plate 225 x 225 mm, fixing screws, 1/2" captive nut connections on the supply pipe and at the bottom, completely pre-fixed 15

NILplus Shower - Sets NILplus shower set 700.825.08 DN 15 1/2" 700.825.08 Self-closing straight way valve + rising pipe incl. Screw fitting and wall union + shower head 20 and economy shower head type: NOVAMATIC 8 l/min. NILplus shower set 710.020.08 DN 15 1/2" 710.020.08 Self-closing straight way valve, for concealed installation + shower head 20 NOVAMATIC (shower arm 20, rosette ø 70 mm, economy shower head NOVAMATIC 8 l/min.) NILplus shower set 720.825.08 DN 15 1/2" 720.825.08 Self-closing straight way valve, combined with shower mixer tap. + riser pipe incl. Screw fittings and wall union + shower arm 20 and economy shower head type: NOVAMATIC 8 l/min. NILplus shower set 730.020.08 DN 15 1/2" 730.020.08 Self-closing straight way valve, combined with shower mixer tap, for concealed installation. + riser pipe incl. Screw fittings and wall union + shower arm 20 and economy shower head type: NOVAMATIC 8 l/min. NILplus shower set 740.020.08 DN 15 1/2" 740.020.08 Self-closing straight way valve, combined with thermostatic shower mixer tap. + wall feed-through + shower head 20, rosette ø 70 mm, economy shower head type: NOVAMATIC 8 l/min. NILplus shower set 750.020.08 DN 15 1/2" 750.020.08 Self-closing straight way valve, combined with thermostatic shower mixer tap, for concealed installation + shower head 20, rosette ø 70 mm, economy shower head type: NOVAMATIC 8 l/min. 16

Accessories for Self-Closing Straight-Way Valves Shower set 20 NOVAMATIC 025.08 (Shower arm 20, rosette ø 70 mm, economy shower head NOVAMATIC 8 l/min.) Shower head NOVAMATIC 8 l/min 795.08 1/2" internal thread Riser pipe Riser pipe ø 18 mm x 1000 mm, cranked, 2 cap nuts 3/4", wall union 1/2" x 3/4" 800 Wall feed through 1/2" x 3/4" 781 long type, with sliding rosette Angle connection 1/2" x 1/2" 780 with compression nut 1/2" for pipe ø 15 mm, rectangular rosette Shower arm 20 783 1/2" external thread on both sides, wall rosette ø 70 mm 17

Foot Spraying Equipment and Accessories Foot spraying equipment with supply DN 15 1/2" 481 stop For wall mounted installation Flow pressure 1.2-5.0 bar Flusher 1/2", rectangular rosette Flush pipe approx. 800 mm long Incl. Spray nozzle Foot spraying equipment with supply DN 15 1/2" 486 stop For semi-concealed installation Flow pressure 1.2-5.0 bar Flusher 1/2", rectangular rosette Height adjustable wall feed-through bwith rectangular wall rosette Outlet pipe with spray nozzle and wall rosette 18

Design - Angle Valves Angle valve NILplus topform DN 15 1/2" 2005 Polished DIN EN ISO 3822 chrome Test registration no. PA-IX 276/IA Group of fittings I German patent no. 3223356 Self-sealing connection thread 1/2" Sliding rosette ELB screw fitting 3/8" for copper pipe ø 10 mm, with design cover cap Angle valve NILplus crossline DN 15 1/2" 20051 Polished All metall angle valve with patented chrome NILplus upper part. German patent no. 3223356. Angle valve acc. to DIN 3227. Noise level acc. to DIN EN ISO 3822. Sels-sealing connection thread 1/2". Sliding rosette ø 55 mm, ELB-screw fitting 3/8" with plug on design cover cap Angle valve NILplus topline DN 15 1/2" 20052 Polished All metall angle valve with patented chrome NILplus upper part. German patent no. 3223356. Angle valve acc. to DIN 3227. Noise level acc. to DIN EN ISO 3822. Sels-sealing connection thread 1/2". Sliding rosette ø 55 mm, ELB-screw fitting 3/8" with plug on design cover cap Angle valve NILplus pinline DN 15 1/2" 20053 Polished All metall angle valve with patented chrome NILplus upper part. German patent no. 3223356. Angle valve acc. to DIN 3227. Noise level acc. to DIN EN ISO 3822. Sels-sealing connection thread 1/2". Sliding rosette ø 55 mm, ELB-screw fitting 3/8" with plug on design cover cap NILplus design cover cap 20051-11 Polished chrome For use in combination with flexible hoses instead of copper pipes 19

Angle Valves Suitable as stop- and throttle valves. DIN 3227 - Test reg. P-IX 723 / IA Angle valve 3/8", short type DN 10 3/8" 1222 Compression fitting 3/8" Angle valve 3/8", short type ELB screw fitting 3/8" DN 10 3/8" 1222/ELB Angle valve 3/8", short type DN 10 3/8" 1225 Self sealing Compression fitting 3/8" Angle valve 3/8", short type Self sealing ELB screw fitting 3/8" DN 10 3/8" 1225/ELB Angle valve 1/2", short type DN 15 1/2" 1322 Compression fitting 3/8" Angle valve 1/2", short type ELB screw fitting 3/8" DN 15 1/2" 1322/ELB Angle valve 1/2", short type DN 15 1/2" 1325 Self sealing Compression fitting 3/8" Angle valve 1/2", short type Self sealing ELB screw fitting 3/8" DN 15 1/2" 1325/ELB 20

Angle Valves Suitable as stop- and throttle valves. DIN 3227 - Test reg. P-IX 723 / IA Angle valve 3/8", long type DN 10 3/8" 1242 Sliding rosette, compression fitting 3/8" Angle valve 3/8", long type Sliding rosette, ELB screw fitting 3/8" DN 10 3/8" 1242/ELB Angle valve 3/8", long type DN 10 3/8" 1245 Self sealing Sliding rosette, compression fitting 3/8" Angle valve 3/8", long type Self sealing Sliding rosette, ELB screw fitting 3/8" DN 10 3/8" 1245/ELB Angle valve 1/2", long type DN 15 1/2" 1342 Sliding rosette, compression fitting 3/8" Angle valve 1/2", long type Sliding rosette, ELB screw fitting 3/8" DN 15 1/2" 1342/ELB Angle valve 1/2", long type DN 15 1/2" 1345 Self sealing Sliding rosette, compression fitting 3/8" Angle valve 1/2", long type Self sealing Sliding rosette, ELB screw fitting 3/8" DN 15 1/2" 1345/ELB 21

Angle Valves Suitable as stop- and throttle valves. DIN 3227 - Test reg. P-IX 723 / IA Angle valve 1/2", long type DN 15 1/2" 1342/E with drainage aperture Sliding rosette, compression fitting 3/8" Angle valve 1/2", short type DN 15 1/2" 1362 Compression fitting 1/2" for copper pipe ø 12 mm Angle valve 1/2", short type DN 15 1/2" 1365 Self sealing Compression fitting 1/2" for copper pipe ø 12 mm Angle valve 1/2", long type DN 15 1/2" 1382 Sliding rosette, compression fitting 1/2" for copper pipe ø 12 mm Angle valve 1/2", long type DN 15 1/2" 1385 Self sealing Sliding rosette, compression fitting 1/2" for copper pipe ø 12 mm Angle valve 1/2", short type DN 15 1/2" 1504 With sanitary head and tricorn handle Compression fitting 1/2" for copper pipe ø 12 mm Angle valve 1/2", long type DN 15 1/2" 1544 With sanitary head and tricorn handle Sliding rosette, compression fitting 1/2" for copper pipe ø 12 mm 22

Slanted - Seat Valves Test reg. P-IX 116 / I Slanted - seat valve 3/8" DN 10 3/8" 3122 Short type Compression fitting 3/8" Slanted - seat valve 1/2" DN 10 3/8" 3142 Long type Sliding rosette, compression fitting 3/8" Slanted - seat valve 1/2" DN 15 1/2" 4122 Short type Compression fitting 3/8" Slanted - seat valve 1/2" DN 15 1/2" 4142 Long type Sliding rosette, compression fitting 3/8" Slanted - seat valve 3/8" DN 10 3/8" 3123 Short type Compression fitting 3/8" Compression fitting 3/8" for copper pipe ø 12 mm Slanted - seat valve 1/2" DN 15 1/2" 4124 Short type Clamp ring screwing 1/2" for copper pipe ø 15 mm (compression nut 1/2" x ø 15 mm, brass clamp ring ø 15 mm) Compression fitting 3/8" 23

Hose taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator) Hose tap 3/8" x 3/4" DN 10 3/8" 6600 Hose tap for connection to existing angle valves 3/4" hose connection thread 3/8" sanitary head with backflow prevention device and tricorn sani-grip 3/8" connection thread 3/8" ELB screw fitting for copper pipe ø 10 mm Noise level according to DIN 4109 / DIN 52218 - PA-IX 8349 / I Hose tap as above DN 10 3/8" 6601 however with pipe ventilation fitting Combined angle valve 3/8" x 3/4" DN 10 3/8" 6610 Sliding rosette ø 60 mm 3/4" hose connection thread 3/8" sanitary head with backflow prevention device and tricorn sani-grip 3/8" connection thread 3/8" ELB screw fitting for copper pipe ø 10 mm Noise level according to DIN 4109 / DIN 52218 - PA-IX 718 / IA Dto., however with pipe ventilation fitting DN 10 3/8" 6611 Combined angle valve 1/2" x 3/4" DN 15 1/2" 6620 Dto., however with pipe ventilation fitting DN 15 1/2" 6621 Combined angle valve 1/2" x 3/4" DN 15 1/2" 6625 with self - sealing connection thread Dto., however with pipe ventilation fitting DN 15 1/2" 6626 Slanted - seat hose tap 1/2" x 3/4" DN 15 1/2" 6630 3/8" sanitary head with backflow prevention device 6630 and tricorn sani-grip 3/8" connection thread, 3/4" hose connection thread Slanted - seat hose tap 1/2" x 3/4" DN 15 1/2" 6631 3/8" sanitary head with backflow prevention device and tricorn sani-grip 3/8" connection thread 3/4" hose connection thread Pipe ventilation fitting according to DIN 3266 - Test registration no. applied for as above, however with lockable grip cap DN 15 1/2" 6635 cr-plated 6631 as above, however with lockable grip cap DN 15 1/2" 6634 cr-plated 6634 24

NILplus hose taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator) NILplus hose tap 3/8" x 3/4" DN 10 3/8" 6800 Hose tap for connection to existing angle valves 3/4" hose connection thread 3/8" sanitary head with backflow prevention device and NILplus handle 3/8" connection thread 3/8" ELB screw fitting for copper pipe ø 10 mm Noise level according to DIN 4109 / DIN 52218 - PA-IX 8349 / I NILplus hose tap as above DN 10 3/8" 6801 however with pipe ventilation fitting NILplus c ombined angle valve 3/8" x 3/4" DN 10 3/8" 6810 Sliding rosette ø 60 mm 3/4" hose connection thread 3/8" sanitary head with backflow prevention device and NILplus handle 3/8" connection thread 3/8" ELB screw fitting for copper pipe ø 10 mm Noise level according to DIN 4109 / DIN 52218 - PA-IX 718 / IA Dto., however with pipe ventilation fitting DN 10 3/8" 6811 NILplus combined angle valve 1/2" x 3/4" DN 15 1/2" 6820 Dto., however with pipe ventilation fitting DN 15 1/2" 6821 NILplus combined angle valve 1/2" x 3/4" DN 15 1/2" 6825 with self - sealing connection thread Dto., however with pipe ventilation fitting DN 15 1/2" 6826 NILplus slanted - seat hose tap 1/2" x 3/4" DN 15 1/2" 6830 3/8" sanitary head with backflow prevention device and NILplus handle 3/8" connection thread, 3/4" hose connection thread NILplus slanted - seat hose tap 1/2" x 3/4" DN 15 1/2" 6631 3/8" sanitary head with backflow prevention device and NILplus handle 3/8" connection thread 3/4" hose connection thread Pipe ventilation fitting according to DIN 3266 - Test registration no. applied for 26

NILplus hose taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator) NILplus hose tap 1/2" x 3/4" DN 15 1/2" 6840 Hose tap as intermediate valve for single draw-off points 3/8" sanitary head with back flow preventor device and NILplus handle 3/4" hose connection thread NILplus hose tap 1/2" x 3/4" DN 15 1/2" 6841 Hose tap as intermediate valve for single draw-off points Safety combination "HD" with back flow preventer and pipe ventilator 3/8" sanitary head with back flow preventor and NILplus handle 3/4" hose connection thread NILplus hose tap 3/4" DN 20 3/4" 6842 Hose tap as intermediate valve for wall - mounted mixer taps 3/8" sanitary head with back flow preventor and NILplus handle 3/4" hose connection thread 3/4" spacer NILplus hose tap 3/4" DN 20 3/4" 6843 Hose tap as intermediate valve for wall - mounted mixer taps Safety combination "HD" with back flow preventer and pipe ventilator 3/8" sanitary head with back flow preventor and NILplus handle 3/4" hose connection thread 3/4" spacer NILplus sink tap 1/2" x 3/4" DN 15 1/2" 6850 Adjustable distance 50 mm 1/2" sanitary head with back flow preventor and NILplus handle 3/4" hose connection thread 1/2" compression fitting for copper pipe ø 10 mm 27

Sink and draw-off taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator) Sink tap 1/2" x 3/4" DN 15 1/2" 6650 Adjustable distance 50 mm 1/2" sanitary head with back flow preventor and tricorn sani - grip 3/4" hose connection thread 1/2" compression fitting for copper pipe ø 10 mm Sink bushing 6720 With hose connection With copper pipe ø 12 mm x 500 mm With 3/4" cap nut, with seal Adjustable distance 70 mm Draw - off tap DN 15 1/2" 6700 with toggle - type handle hose connection 3/4" DN 20 3/4" 6710 dull-chrome plated finish dull-chrome plated finish Draw - off tap DN 15 1/2" 6701 chromewith toggle - type handle plated hose connection 3/4" DN 20 3/4" 6711 Draw - off tap DN 15 1/2" 6702 Safety combination "HD" with back flow preventer and pipe ventilator DN 20 3/4" 6712 with toggle - type handle hose connection 3/4" dull-chrome plated finish dull-chrome plated finish Draw - off tap DN 15 1/2" 6703 chrome- Safety combination "HD" with back flow plated preventer and pipe ventilator DN 20 3/4" 6713 chromewith toggle - type handle plated hose connection 3/4" Draw - off tap DN 15 1/2" 6704 Safety combination "HD" with back flow preventer and pipe ventilator with sanitary head and tricorn handle hose connection 3/4" as above, however with lockable grip cap DN 15 1/2" 6705 as above, however with lock shield device DN 15 1/2" 6706 28

Pipe ventilator, Anti hose-burst device Pipe ventilator 3/4", acc to DIN 3266 6900 Anti Hose-Burst-Device 6901 chrome- 3/4" internal x 3/4" external thread plated for combined angle valves and draw-off taps, TÜV and GS approved 29

Frost-proof taps With back flow preventer and pipe ventilator acc. to DIN 3266 as safety combination "HD" acc. to DIN 1988, part 4 and DIN EN 1717 (back flow preventer and pipe ventilator) German patent no. 10315224 Scope of delivery gray colored!!! Frostproof tap for wall thickness 150 mm - 275 mm. With tricorn handle 1/2" sanitary head with grease chamber Backflow preventer acc. DIN 1988 Pipe ventilator acc. DIN 3266 3/4" hose connection Wall rosette ø 85 mm with length adaption Wall feed-through ø 26 mm and valve spindle with patented cut-off system Close and stop plug for wall pipe and valve spindle when in carcass phase Felt insulation Water connection with 1/2" external thread Angled connection 1/2" (order-no. 5224) and extension set (order-no. 7777) to be ordered separately Hydraulic values acc. DIN 3269, sound level values acc. DIN ISO 3822/I, test reg. PA-IX 9096/II As no. 7005, however without pipe ventilator DN 15 1/2" 7000 for wall thickness 150 mm - 275 mm Frostproof tap, with sanitary head and lock shield device DN 15 1/2" 7015 for wall thickness 150 mm - 275 mm As no. 7015, however witout pipe ventilator DN 15 1/2" 7010 for wall thickness 150 mm - 275 mm Frostproof tap, with sanitary head and lockable grip cap DN 15 1/2" 7025 for wall thickness 150 mm - 275 mm As no. 7025, however witout pipe ventilator DN 15 1/2" 7020 for wall thickness 150 mm - 275 mm Wall thickness 250 mm - 475 mm Frostproof tap, with tricorn handle DN 15 1/2" 7055 for wall thickness 250 mm - 475 mm As no. 7055, however without pipe ventilator DN 15 1/2" 7050 for wall thickness 250 mm - 475 mm Frostproof tap, with sanitary head and lock shield device DN 15 1/2" 7065 for wall thickness 250 mm - 475 mm As no. 7065, however witout pipe ventilator DN 15 1/2" 7060 for wall thickness 250 mm - 475 mm Frostproof tap, with sanitary head and lockable grip cap DN 15 1/2" 7075 for wall thickness 250 mm - 475 mm As no. 7075, however witout pipe ventilator DN 15 1/2" 7070 for wall thickness 250 mm - 475 mm Wall thickness 150 mm - 275 mm DN 15 1/2" 7005 30

Frost-proof taps - Accessories German Patent no. 10315224 7777 raw brass Extension set for frostproof tap Wall pipe extension ø 35 x 115 mm, with screws M 6 and o-ring seals Valve spindle extension with plug-on sleeve and screws M 4 31

Concealed valves with internal thread on both sides. Package containing concealed + exposed part. Extended mounting dimension by using extra long valve spindles! Concealed valve 1/2" DN 15 1/2" 8700 made of dezincification resistant brass 1/2" x 1/2" internal thread. Installation depth max. 50 mm. Sanitary grease chamber head with extra long valve spindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm. Tricorn grip with blue and red socket. as above, however with acryllic grip (blue) DN 15 1/2" 8701 Concealed valve (internal thread) as above, however with acryllic grip (red) DN 15 1/2" 8702 with tricorn grip as above, however with lock shield device DN 15 1/2" 8705 as above, however with closed cap DN 15 1/2" 8706 Concealed valve 3/4" DN 20 3/4" 8710 made of dezincification resistant brass 3/4" x 3/4" internal thread. Installation depth max. 55 mm. Sanitary grease chamber head with extra long valve spindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm. Tricorn grip with blue and red socket. Concealed valve as above, however with acryllic grip (blue) DN 20 3/4" 8711 with acryllic grip as above, however with acryllic grip (red) DN 20 3/4" 8712 as above, however with lock shield device DN 20 3/4" 8715 as above, however with closed cap DN 20 3/4" 8716 Concealed valve with lock shield device Concealed valve 1" DN 25 1" 8720 made of dezincification resistant brass 1" x 1" internal thread. Installation depth max. 60 mm. Sanitary grease chamber head with extra long valve spindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm. Tricorn grip with blue and red socket. as above, however with acryllic grip (blue) DN 25 1" 8721 as above, however with acryllic grip (red) DN 25 1" 8722 as above, however with lock shield device DN 25 1" 8725 as above, however with closed cap DN 25 1" 8726 Concealed valve with closed cap Material acc. to DIN EN 50930. Dimensions acc. DIN 3512. Hydraulic values acc. DIN EN 1213. Noise behaviour acc. DIN EN 3822. DVGW model test certificate NW-6150BS0117. 32

Concealed valves with soldering connection on both sides. Package containing concealed + exposed part. Extended mounting dimension by using extra long valve spindles! Concealed valve DN 15 DN 15 ø 15 8730 made of dezincification resistant brass Soldering connection ø 15 mm on both sides. Installation dim. max. 50 mm. Sanitary grease chamber head with extra long valve spindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm. Tricorn grip with blue and red socket. as above,however with acryllic grip (blue) DN 15 ø 15 8731 Concealed valve as above, however with acryllic grip (red) DN 15 ø 15 8732 (soldering connection) with tricorn grip as above, however with lock shield device DN 15 ø 15 8735 as above, however with closed cap DN 15 ø 15 8736 Concealed valve DN 15 DN 15 ø 18 8740 made of dezincification resistant brass Soldering connection ø 18 mm on both sides. Installation dim. max. 50 mm. Sanitary grease chamber head with extra long valve spindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm. Tricorn grip with blue and red socket. as above, however with acryllic grip (blue) DN 15 ø 18 8741 Concealed valve as above, however with acryllic grip (red) DN 15 ø 18 8742 with acryllic grip as above, however with lock shield device DN 15 ø 18 8745 as above, however with closed cap DN 15 ø 18 8746 Concealed valve DN 20 DN 20 ø 22 8750 made of dezincification resistant brass Soldering connection ø 22 mm on both sides. Installation dim. max. 55 mm. Sanitary grease chamber head with extra long valve spindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm. Tricorn grip with blue and red socket. as above, however with acryllic grip (blue) DN 20 ø 22 8751 as above, however with acryllic grip (red) DN 20 ø 22 8752 Concealed valve as above, however with lock shield device DN 20 ø 22 8755 with lock shield device as above, however with closed cap DN 20 ø 22 8756 Concealed valve 25 DN 25 ø 28 8760 made of dezincification resistant brass Soldering connection ø 28 mm on both sides. Installation dim. max. 60 mm. Sanitary grease chamber head with extra long valve spindle. With balance sleeve, concealed protection cap, sliding rosette ø 70 mm. Tricorn grip with blue and red socket. as above, however with acryllic grip (blue) DN 25 ø 28 8761 as above, however with acryllic grip (red) DN 25 ø 28 8762 Concealed valve with closed cap as above, however with lock shield device DN 25 ø 28 8765 as above, however with closed cap DN 25 ø 28 8766 Material acc. to DIN EN 50930. Dimensions acc. DIN 3512. Hydraulic values acc. DIN EN 1213. Noise behaviour acc. DIN EN 3822. DVGW model test certificate NW-6150BS0117. 33

Concealed valves Concealed parts - exposed parts - extension sets. Extended mounting dimension by using extra long valve spindles! Concealed set 1/2" DN 15 1/2" 8700-01 raw brass Concealed valve with 1/2" internal thread on both sides. Sanitary grease chamber head 1/2" with extra long valve spindle, concealed protection cap. Concealed part with internal thread (concealed valve, protection cap) Concealed set 3/4" DN 20 3/4" 8710-01 raw brass Concealed valve with 3/4" internal thread on both sides. Sanitary grease chamber head 3/4" with extra long valve spindle, concealed protection cap. Concealed set 1" DN 25 1" 8720-01 raw brass Concealed valve with 1" internal thread on both sides. Sanitary grease chamber head 1" with extra long valve spindle, concealed protection cap. Concealed part with soldering connection Concealed set DN 15 ø 15 DN 15 ø 15 8730-01 raw brass Concealed valve with soldering connection ø 15 on (concealed valve, protection cap) both sides. Sanitary grease chamber head 1/2" with extra long valve spindle, conc. protection cap. Concealed set DN 15 ø 18 DN 15 ø 18 8740-01 raw brass Concealed valve with soldering connection ø 18 on both sides. Sanitary grease chamber head 1/2" with extra long valve spindle, conc. protection cap. Exposed part (tricorn grip, sliding rosette, balance sleeve) Concealed set DN 20 ø 22 DN 20 ø 22 8750-01 raw brass Concealed valve with soldering connection ø 22 on both sides. Sanitary grease chamber head 3/4" with extra long valve spindle, conc. protection cap. Concealed set DN 25 ø 28 DN 25 ø 28 8760-01 raw brass Concealed valve with soldering connection ø 28 on Exposed part both sides. Sanitary grease chamber head 1" (acryllic grip, sliding rosette, balance sleeve) with extra long valve spindle, conc. protection cap. Exposed part - tricorn grip 8700-02 Tricorn grip, with blue + red socket. Balance sleeve, sliding rosette ø 70 mm. Exposed part - acryllic grip Exposed part Acryllic grip with adaptor piece. blue 8701-02 (lock shield device, sliding rosette, Balance sleeve, sliding rosette ø 70 mm. red 8701-03 balance sleeve) Exposed part - lock shield device 8705-02 Lock shield device with adaptor sleeve. Balance sleeve, sliding rosette ø 70 mm. Exposed part (closed cap, sliding rosette, balance sleeve) Exposed part - closed cap 8706-02 Closed cap. Balance sleeve, sliding rosette ø 70 mm. Extension set Extension set for concealed valves 8795 Extension +42 mm, with balance sleeve and spindle extension. Material acc. to DIN EN 50930. Dimensions acc. DIN 3512. Hydraulic values acc. DIN EN 1213. Noise behaviour acc. DIN EN 3822. DVGW model test certificate NW-6150BS0117. 34

NILplus concealed valves Variable installation depth 35-105 mm by means of a 4x adjustable wall pipe Package containing concealed + exposed part. NILplus concealed valve 1/2" DN 15 1/2" 8800 Concealed part with variable installation depth 35-105 mm. Casing 1/2" x 1/2" internal thread. Dezincification resistant brass,sanitary grease chamber head with short spindle. Wall pipe and intermediate spindle piece 4x adjustable. With polystyrene protection sleeve. Exposed part with NILplus handle, upper part with integ. spindle and rosette ø 70 x 24 mm as above, however with acryllic grip (blue) DN 15 1/2" 8801 as above, however with acryllic grip (red) DN 15 1/2" 8802 as above, however with lock shield device DN 15 1/2" 8805 as above, however with closed cap DN 15 1/2" 8806 NILplus concealed valve 3/4" DN 20 3/4" 8810 Concealed part with variable installation depth 40-110 mm. Casing 3/4" x 3/4" internal thread. Dezincification resistant brass,sanitary grease chamber head with short spindle. Wall pipe and intermediate spindle piece 4x adjustable. With polystyrene protection sleeve. Exposed part with NILplus handle, upper part with integ. spindle and rosette ø 70 x 24 mm as above, however with acryllic grip (blue) DN 20 3/4" 8811 as above, however with acryllic grip (red) DN 20 3/4" 8812 as above, however with lock shield device DN 20 3/4" 8815 as above, however with closed cap DN 20 3/4" 8816 NILplus concealed valve 1" DN 25 1" 8820 Concealed part with variable installation depth 45-115 mm. Casing 1" x 1" internal thread. Dezincification resistant brass,sanitary grease chamber head with short spindle. Wall pipe and intermediate spindle piece 4x adjustable. With polystyrene protection sleeve. Exposed part with NILplus handle, upper part with integ. spindle and rosette ø 70 x 24 mm as above, however with acryllic grip (blue) DN 25 1" 8821 as above, however with acryllic grip (red) DN 25 1" 8822 as above, however with lock shield device DN 25 1" 8825 as above, however with closed cap DN 25 1" 8826 35

NILplus concealed valves With sanitary ceramic head part Variable installation depth 35-105 mm by means of a 4x adjustable wall pipe Package containing concealed + exposed part. NILplus concealed valve 1/2" DN 15 1/2" 8900 Concealed part with variable installation depth 35-105 mm. Casing 1/2" x 1/2" internal thread. Dezincification resistant brass,sanitary ceramic head part with short spindle. Wall pipe and intermediate spindle piece 4x adjustable. With polystyrene protection sleeve. Exposed part with NILplus handle, upper part with integ. spindle and rosette ø 70 x 24 mm NILplus concealed valve 3/4" DN 20 3/4" 8910 Concealed part with variable installation depth 40-110 mm. Casing 3/4" x 3/4" internal thread. Dezincification resistant brass,sanitary ceramic head part with short spindle. Wall pipe and intermediate spindle piece 4x adjustable. With polystyrene protection sleeve. Exposed part with NILplus handle, upper part with integ. spindle and rosette ø 70 x 24 mm 36

Threaded nipples, Reducing fittings, Screw sockets, Screw connections Article description Thread size Orderno. Threaded nipple 3/8"ext. x 3/8"ext. 5100 raw 5101 chrome-pl. Threaded nipple 1/2"ext. x 1/2"ext. 5102 raw 5103 chrome-pl. Threaded nipple 3/4"ext. x 3/4"ext. 5104 raw 5105 chrome-pl. Threaded nipple 3/8"ext. x 1/2"ext. 5106 raw 5107 chrome-pl. Threaded nipple 1/2"ext. x 3/4"ext. 5108 raw 5109 chrome-pl. Reducing fitting 3/8"int. x 3/8"ext. 5110 raw 5111 chrome-pl. Reducing fitting 3/8"int. x 1/2"ext. 5112 raw 5113 chrome-pl. Reducing fitting 1/2"int. x 1/2"ext. 5114 raw 5115 chrome-pl. Reducing fitting 1/2"int. x 3/8"ext. 5116 raw 5117 chrome-pl. Reducing fitting 3/4"int. x 1/2"ext. 5118 raw 5119 chrome-pl. Screw socket 3/4"int. x 3/4"int. 5120 raw 5121 chrome-pl. Screw connection 1/2" 5130 raw 5131 chrome-pl. Screw connection 1/2" 5132 raw 5133 chrome-pl. 37

Pipe Couplings Pipe coupling 3/8" x 3/8" 5508 Compression fitting 3/8" for copper pipe ø 8 mm dto, with compression fitting for copper 5500 pipe ø 10 mm Pipe coupling 3/8" x 1/2" 5501 Compression fitting 1/2" for copper pipe ø 12 mm Pipe coupling 1/2" x 1/2" Compression fitting 1/2" for copper 5603 pipe ø 10 mm dto, with compression fitting 1/2" for 5600 copper pipe ø 12 mm dto, with compression fitting 1/2" for 5601 copper pipe ø 14 mm dto, with compression fitting 1/2" for 5602 copper pipe ø 16 mm Pipe coupling 1/2" x 3/8" 5661 Compression fitting 3/8" for copper pipe ø 10 mm Pipe coupling 3/8" internal thread x 3/8" external thread 5710 Compression fitting 3/8" for copper pipe ø 8 mm dto, with compression fitting 3/8" for 5700 copper pipe ø 10 mm Pipe coupling 1/2" internal thread x 1/2" external thread Compression fitting 1/2" for copper 5803 pipe ø 10 mm dto, with compression fitting 1/2" for 5800 copper pipe ø 12 mm dto, with compression fitting 1/2" for 5801 copper pipe ø 14 mm dto, with compression fitting 1/2" for 5802 copper pipe ø 16 mm Pipe coupling 1/2" internal 5860 thread x 3/8" external thread Compression fitting 3/8" for copper pipe ø 10 mm 38

Pipe Couplings Pipe coupling 3/8" x 3/8" 2 compression fittings 3/8" for copper 5558 chromepipe ø 8 mm plated 2 compression fittings 3/8" for copper 5550 chromepipe ø 10 mm plated 2 compression fittings 3/8" for copper 5556 chromepipe ø 10 mm and ø 8 mm plated 2 compression fittings 3/8" for copper 5557 chromepipe ø 12 mm plated Pipe coupling 1/2" x 1/2" 2 compression fittings 1/2" for copper 5655 chromepipe ø 10 mm plated 2 compression fittings 1/2" for copper 5650 chromepipe ø 12 mm plated 2 compression fittings 1/2" for copper 5651 chromepipe ø 14 mm plated 2 compression fittings 1/2" for copper 5652 chromepipe ø 16 mm plated 2 compression fittings 1/2" for copper 5653 chromepipe ø 14 mm and ø 12 mm plated 2 compression fittings 1/2" for copper 5654 chromepipe ø 16 mm and ø 12 mm plated Pipe coupling 1/2" x 3/8" 5660 Compression fitting 1/2" for copper pipe ø 12 mm, with compression fitting 3/8" 39

Angled Couplings Angled coupling 3/8" x 3/8" Compression fitting 3/8" for copper 5008 fitting ø 8 mm dto, with compression fitting 3/8" for 5000 copper pipe ø 10 mm Angled coupling 3/8" x 1/2" 5251 Compression fitting 1/2" for copper fittingø 12 mm Angled coupling 1/2" x 1/2" Compression fitting 1/2" for copper fitting ø 10 mm 5212 Compression fitting 1/2" for copper 5200 fitting ø 12 mm dto, with compression fitting 1/2" for 5210 copper pipe ø 14 mm dto, with compression fitting 1/2" for 5211 copper pipe ø 16 mm Angled coupling 1/2" x 3/8" 5250 Compression fitting 3/8" for copper fitting ø 10 mm Angled coupling 3/8" internal thread Compression fitting 3/8" for copper 5310 fitting ø 8 mm dto, with compression fitting 3/8" for 5300 copper pipe ø 10 mm Angled coupling 1/2" internal thread Compression fitting 1/2" for copper 5403 fitting ø 10 mm Compression fitting 1/2" for copper 5400 fitting ø 12 mm dto, with compression fitting 1/2" for 5401 copper pipe ø 14 mm dto, with compression fitting 1/2" for 5402 copper pipe ø 16 mm 40

Angled Couplings Angled coupling 1/2" internal thread 5450 Compression fitting 3/8" for copper fitting ø 10 mm Angled coupling 3/8" x 3/8" 2 compression fittings 3/8" for copper 5001 pipe ø 8 mm 2 compression fittings 3/8" for copper 5002 pipe ø 10 mm 2 compression fittings 3/8" for copper 5003 pipe ø 10 mm and ø 8 mm Angled coupling 1/2" x 1/2" 2 compression fittings 1/2" for copper 5207 pipe ø 10 mm 2 compression fittings 1/2" for copper 5202 pipe ø 12 mm 2 compression fittings 1/2" for copper 5203 pipe ø 14 mm 2 compression fittings 1/2" for copper 5204 pipe ø 16 mm 2 compression fittings 1/2" for copper 5205 pipe ø 14 mm and ø 12 mm 2 compression fittings 1/2" for copper 5206 pipe ø 16 mm and ø 12 mm Angled coupling 1/2" x 3/8" 5252 Compression fitting 1/2" for copper pipe ø 12 mm, with compression fitting 3/8" 41

Angled Couplings, T - Couplings Angled coupling 1/2" x 1/2", long type 5065 Threaded rosette, compression fitting 1/2" for copper pipe ø 12 mm Angled coupling 1/2" x 3/8", long type 5070 Threaded rosette, compression fitting 3/8" Angled coupling 1/2" x 1/2", long type 5270 sliding rosette, compression fitting 1/2" for copper pipe ø 12 mm Angled coupling 1/2" x 3/8", long type 5280 sliding rosette, compression fitting 3/8" T - coupling 3/8" x 3/8" x 3/8" 5900 3 compression fittings 3/8" for copper pipe ø 8 mm dto, however 5901 dto., however for copper ø 10 mm, 5905 ø 8 mm and ø 10 mm T - coupling 1/2"x 1/2" x 1/2" 5902 3 compression fittings 1/2" for copper pipe ø 12 mm dto, however for copper pipe ø 14 mm 5903 dto, however for copper pipe 16 mm 5904 dto, however for copper pipe ø 12 mm, 5906 ø 10 mm and ø 12 mm dto, however for copper pipe ø 14 mm, 5907 ø 12 mm and ø 14 mm dto, however for copper pipe ø 16 mm, 5908 ø 12 mm and ø 16 mm T - coupling 3/8" x 3/8" x 3/8" with flexible cap nut 3/8", with 5941 2 compression fittings 3/8" x ø 10 mm with flexible cap nut 3/8", with 5942 2 ELB-fittings 3/8" x ø 10 mm with flexible cap nut 3/8", without 5943 compression fittings 42

T - Couplings, Forked Couplings, Wall Unions T - Piece 1/2" x 1/2" x 1/2" 5911 Spacer 1/2" x 1/2" 6000 T - Piece - Set 5931 1/2" x 1/2" x 1/2" T-Piece 1/2" x 3/4" x 3/4" 5913 with 3/4" screwing Spacer 3/4" x 3/4" 6001 with 3/4" screwing T - Piece - Set 5932 1/2" x 3/4" x 3/4" T - piece with 3/4" screwing Forked fitting 1/2" x 1/2" x 1/2" 6052 short type T - Piece 1/2" 6065 with compression fitting 3/8", sliding rosette T - Piece 1/2" 6066 with compression fitting 3/8", sliding rosette for copper pipe ø 12 mm Wall union 1/2" 6060 Compression fitting 1/2", sliding rosette, Wall union 1/2" 6061 Compression fitting 1/2", sliding rosette, for copper pipe ø 12 mm 43

Accessories for Angle Valves and Couplings Compression fitting 3/8" for copper pipe ø 8 mm Compression fitting 3/8" E/13K E/14K Compression fitting 3/8" for copper pipe ø 12 mm E/15K Compression nut 3/8" x ø 8 mm E/16 Compression nut 3/8" x ø 10 mm E/17 Compression nut 3/8" x ø 12 mm E/18 Tapered ring 3/8" x ø 8 mm E/19 raw Tapered ring 3/8" x ø 10 mm E/20 raw Tapered ring 3/8" x ø 12 mm E/21 raw Shim 3/8" x ø 8 mm E/22 raw Shim 3/8" x ø 10 mm E/23 raw Shim 3/8" x ø 12 mm E/24 raw Compression seal 3/8" x ø 8 mm E/25 raw Compression seal 3/8" x ø 10 mm E/26 raw Compression seal 3/8" x ø 12 mm E/27 raw ELB screw fitting 3/8" E/29K ELB nut 3/8" x ø 10 mm E/32 ELB compression sleeve E/35K raw 3/8" x ø 10 mm 44

Accessories for Angle Valves and Couplings Screw fitting 3/8" with flat seal for copper pipe ø 8 mm with 3/8" flange Screw fitting 3/8" with flat seal with 3/8" flange Screw fitting 3/8" with flat seal for copper pipe ø 12 mm with 3/8" flange E/70K E/71K E/72K Cap nut 3/8" x ø 8 mm, flat type E/70 Cap nut 3/8" x ø 10 mm, flat type E/71 Cap nut 3/8" x ø 12 mm, flat type E/72 Seal 3/8" x ø 8 mm E/73 raw Seal 3/8" x ø 10 mm E/74 raw Seal 3/8" x ø 12 mm E/75 raw Compression fitting 1/2" for copper pipe ø 8 mm dto. E/59K E/60K Compression fitting 1/2" for copper pipe ø 12 mm Compression fitting 1/2" for copper pipe ø 14 mm Compression fitting 1/2" for copper pipe ø 16 mm E/61K E/101K E/102K Compression nut 1/2" x ø 8 mm E/59 Compression nut 1/2" x ø 10 mm E/62 Compression nut 1/2" x ø 12 mm E/63 Compression nut 1/2" x ø 14 mm E/103 Compression nut 1/2" x ø 16 mm E/104 Tapered ring 1/2" x ø 8 mm E/86 raw Tapered ring 1/2" x ø 10 mm E/105 raw Tapered ring 1/2" x ø 12 mm E/106 raw Tapered ring 1/2" x ø 14 mm E/107 raw Tapered ring 1/2" x ø 16 mm E/108 raw Shim 1/2" x ø 8 mm E/64 raw Shim 1/2" x ø 10 mm E/65 raw Shim 1/2" x ø 12 mm E/66 raw Shim 1/2" x ø 14 mm E/67 raw Shim 1/2" x ø 16 mm E/109 raw 45

Accessories for Angle Valves and Couplings Compression seal 1/2" x ø 8 mm E/81 raw Compression seal 1/2" x ø 10 mm E/68 raw Compression seal 1/2" x ø 12 mm E/69 raw Compression seal 1/2" x ø 14 mm E/110 raw Compression seal 1/2" x ø 16 mm E/111 raw Screw fitting 1/2" with flat seal for copper pipe ø 8 mm with 1/2" flange E/76K Screw fitting 1/2" with flat seal with 1/2" flange E/77K Screw fitting 1/2" with flat seal for copper pipe ø 12 mm with 1/2" flange E/78K Screw fitting 1/2" with flat seal for copper pipe ø 14 mm with 1/2" flange E/79K Screw fitting 1/2" with flat seal for copper pipe ø 16 mm with 1/2" flange E/80K Cap nut 1/2" x ø 8 mm, flat type E/76 Cap nut 1/2" x ø 10 mm, flat type E/77 Cap nut 1/2" x ø 12 mm, flat type E/78 Cap nut 1/2" x ø 14 mm, flat type E/79 Cap nut 1/2" x ø 16 mm, flat type E/80 Seal 1/2" x ø 10 mm E/82 raw Seal 1/2" x ø 12 mm E/83 raw Seal 1/2" x ø 14 mm E/84 raw Seal 1/2" x ø 16 mm E/85 raw 46

Accessories for Angle Valves and Couplings Threaded rosette 3/8" E/92 chrome-plated brass Threaded rosette 1/2" E/93 Stainless steel Tap rosette 1/2" x ø 70 mm E/94 Stainless steel Tap rosette 1/2" x ø 80 mm E/95 Stainless steel Sliding rosette 3/8" E/41 Stainless steel Sliding rosette 1/2" E/42 Stainless steel Sliding rosette ø 70 mm E/44 Stainless steel Sliding rosette 1/2" E/43 ABS chrome - plated 47

Copper Pipes ø 8 mm and ø 10 mm - Wall Thickness 0,70 mm Copper pipe ø 8 mm ø 8 x 300 8/3 straight at both ends ø 8 x 500 8/5 ø 8 x 700 8/7 ø 8 x 1000 8/10 ø 10 x 300 10/3 Copper pipe ø 10 mm ø 10 x 500 10/5 straight at both ends ø 10 x 700 10/7 ø 10 x 1000 10/10 Copper pipe ø 10 mm ø 10 x 300 11/3 3/8" flange (ø 14 mm) - straight ø 10 x 500 11/5 ø 10 x 700 11/7 ø 10 x 1000 11/10 ø 10 x 300 12/3 Copper pipe ø 10 mm ø 10 x 500 12/5 1/2" flange (ø 18 mm) - straight ø 10 x 700 12/7 ø 10 x 1000 12/10 ø 10 x 300 30/3 Copper pipe ø 10 mm ø 10 x 500 30/5 3/8" flange - 1/2" flange ø 10 x 700 30/7 ø 10 x 1000 30/10 ø 10 x 300 13/3 Copper pipe ø 10 mm ø 10 x 500 13/5 1/2" solder nipple (ø 18 mm) - straight ø 10 x 700 13/7 ø 10 x 1000 13/10 48

Copper Pipes ø 10 mm - Wall Thickness 0,70 mm Copper pipe ø 10 mm ø 10 x 300 14/3 3/8" flange with 3/8" nut - straight ø 10 x 500 14/5 ø 10 x 700 14/7 ø 10 x 1000 14/10 ø 10 x 300 15/3 Copper pipe ø 10 mm ø 10 x 500 15/5 1/2" flange with 1/2" nut - straight ø 10 x 700 15/7 ø 10 x 1000 15/10 Copper pipe ø 10 mm ø 10 x 300 17/3 3/8" flange on both sides, with nut 3/8" ø 10 x 500 17/5 Copper pipe ø 10 mm 1/2" flange on both sides, with nut 1/2" ø 10 x 700 17/7 ø 10 x 1000 17/10 ø 10 x 300 18/3 ø 10 x 500 18/5 ø 10 x 700 18/7 ø 10 x 1000 18/10 ø 10 x 300 19/3 Copper pipe ø 10 mm ø 10 x 500 19/5 flange 1/2", with nut 1/2" - flange 3/8", with nut 3/8" ø 10 x 700 19/7 ø 10 x 1000 19/10 ø 10 x 300 21/3 Copper pipe ø 10 mm ø 10 x 500 21/5 flange 1/2", with nut 1/2" - 1/2" soldered throttle shim, with 1/2" nut ø 10 x 700 21/7 ø 10 x 1000 21/10 49

Copper Pipes ø 12, ø 14 and ø 16 mm - Wall Thickness 0,70 mm Copper pipe ø 12 mm ø 12 x 300 22/3 1/2" flange - straight ø 12 x 500 22/5 ø 12 x 700 22/7 ø 12 x 1000 22/10 ø 12 x 300 23/3 Copper pipe ø 12 mm ø 12 x 500 23/5 3/4" solder nipple - straight ø 12 x 700 23/7 ø 12 x 1000 23/10 Copper pipe ø 12 mm ø 12 x 300 28/3 1/2" flange, with 1/2" nut and seal - straight ø 12 x 500 28/5 ø 12 x 700 28/7 ø 12 x 1000 28/10 ø 14 x 300 24/3 Copper pipe ø 14 mm ø 14 x 500 24/5 1/2" flange - straight ø 14 x 700 24/7 ø 14 x 1000 24/10 ø 16 x 300 31/3 Copper pipe ø 16 mm ø 16 x 500 31/5 1/2" flange - straight ø 16 x 700 31/7 ø 16 x 1000 31/10 ø 16 x 300 32/3 Copper pipe ø 16 mm ø 16 x 500 32/5 1/2" flange, with 1/2" nut and seal - straight ø 16 x 700 32/7 ø 16 x 1000 32/10 50

Coils of Copper Pipes ø 8, ø 10, ø 12 mm - Wall thickness 0,70 mm - 0,80 mm Coils of copper pipe ø 8 mm - 5 m long ø 8 25 wall thickness 0,70 mm Coils of copper pipe ø 10 mm - 5 m long ø 10 26 wall thickness 0,70 mm Coils of copper pipe ø 12 mm - 5 m long ø 12 27 wall thickness 0,70 mm Coils of copper pipe ø 10 mm - 5 m long ø 10 28 wall thickness 0,8 mm 51