TECHNICAL DATA AND INFORMATION 114 kw/152 hp 23.5-25 t up to 12 m MHL335 SCRAP RECYCLING MACHINE
TECHNICAL DATA MHL335 OPERATING WEIGHT 23.5-25t DIESEL ENGINE MANUFACTURER AND MODEL Deutz TCD 2012 L06 2V DESIGN 6-cyinder inine ENGINE CONTROL EMR III TYPE 4-stroke diese, common rai direct injection, turbo-charger charge air cooing ENGINE OUTPUT 114 kw/153 hp NOMINAL SPEED 2000 min -1 DISPLACEMENT 6.0 iters COOLING SYSTEM Liquid intercooing with temperature-controed fan speed EMISSION STANDARDS COM III and EPA Tier III AIR FILTER DESIGN Two-stage fiter with safety vave FUEL CAPACITY (USABLE) 300 ELECTRICAL SYSTEM OPERATING VOLTAGE BATTERIES LIGHTING SET OPTION 24 V 2 x 12 V / 100 Ah / 760 A (in accordance with EN) 1 x H3 foodight on upper carriage, 1 x H3 foodight on cab foor, turn signa and rear side-marker amps Magnet system 13 kw TRAVEL DRIVE TRAVEL SPEED 1ST GEAR FTRAVEL SPEED 2ND GEAR GRADEABILITY max. 45% TURNING RADIUS Hydrostatic drive through infinitey variabe axia piston motor and directy mounted trave brake vaves, two-speed shift gear, 4-whee drive max. 5 km/h (3.1 mph) max. 20 km/h (12.4 mph) 8.2 m SWING SYSTEM RING GEAR Internay toothed ba ring gear (doube row) DRIVE Two-stage panetary gear with integrated muti-disc brake UPPER CARRIAGE SWING SPEED Infinitey variabe from 0-8 min -1 PIVOT BRAKE Eectricay operated MAX. PIVOT TORQUE 49 knm UNDERCARRIAGE FRONT AXLE Panetary drive axe with integrated drum brake, rigidy mounted, max. steering ange: 27 REAR AXLE STABILIZERS Osciating panetary drive rear axe with integrated drum brake and seectabe osciating axe ock 4-point stabiizers TIRES Soid rubber, eastic tires 8-fod 10.00-20 BRAKE SYSTEM SERVICE BRAKE PARKING BRAKE Hydrauic singe-circuit braking system acting on a four whee pairs Eectricay operated disc brake at transmission, acting on both front and rear axe 02
HYDRAULIC SYSTEM MAX. PUMP CAPACITY MAX. OPERATING PRESSURE HYDRAULIC OIL TANK OPERATOR S CAB HEATING OPERATOR S SEAT MONITORING AIR CONDITIONING ACOUSTIC POWER LEVEL REXROTH mobie hydrauic system with oad imit contro and fue-saving power demand contro. Separate oi cooer, temperature-controed fan speed. Hydrauic oi fiter: fiter eements integrated in the oi tank; maintenance interva: 3,000 operating hrs. Centra ubrication system. 380 /min 320/360 bar 340 Cab: Easticay supported, infinitey variabe hydrauicay height-adjustabe with max. eye-eve of 5.3 m. Sound-deadened, heat-insuated panoramic windows for optimum a-around view, windshied with pu-down sunbind that sides under cab roof, visibiity pane in cab roof, siding window in cab door, steering coumn height and tit adjustabe. Infinitey variabe hot water heating with 3-speed fan, 4 adjustabe defroster nozzes Air-cushioned comfort-seat with integrated headrest, safety bet and umbar support, seat heating optiona. Seat position, seat incination and seat cushion muti-adjustabe in ine with position of armrests and piot contro units, aowing fatigue-free operation. Ergonomic instrument ayout, gare-free. Function monitoring; automatic warning and storage of deviating operating conditions, e.g. fiter pressure w. warning indicator and shutdown of piot contros, warning indicator or shutdown of piot contros when exceeding hydrauic oi temperature imits. Automatic (guaranteed) in accordance with guideine 2000/14 EG L W(A) = 102 db(a) SAFETY INSTALLATIONS For crane operations in accordance with EN 474-5. Cab protection by cose proximity range imiter. OFFICIAL HOMOLOGATION Certification according to CE reguations. 03
EQUIPMENT MHL335 ENGINE SERIES OPTION Turbocharger Intercooing Direct eectronic fue injection/ Common Rai Automatic ide Engine pre-heating Interface for engine diagnosis Temperature-controed fan drive UNDERCARRIAGE SERIES OPTION 2-speed power-shift transmission 4-pt. stabiizers 4-pt. stabiizers, individuay controabe Stabiizer cyinders with integrated two-way check vaves A-whee drive Piston rod protection on the stabiizer cyinders Stabiizer pates 500 x 350 Rear axe osciating ock Dozer bade in addition to 4-pt. stabiizers Specia paint Drum brakes Too box UPPER CARRIAGE SERIES OPTION Eectrica refueing pump Lighting protection Maintenance hood, actuated by gas strut, with mechanica ocking device Lockabe ceaning access openings on radiator Separate radiator system for ambient temperatures up to 50 C Separate oi cooer with temperaturecontroed fan drive Automatic centra ubrication system Reversing device Specia paint Quick-drain vave for fue tank (deivered in too box) Quick-drain vave on hydrauic oi tank Quick-drain vave on radiator Quick-drain vave on engine oi-pan Reversibe fan for radiator and hydrauic oi cooer CAB SERIES OPTION Lift-up skyight in cab roof Air-cushioned operator s seat with headrest, safety bet and umbar support FOPS protective grating Front/roof protective grating Hinged front windshied Front windows break-resistant (LEXAN) Buet-proof safety gass, front and top Cab eevation system, height-adjustabe Air conditioning Steering coumn, height and tit adjustabe Muti-function dispay Fire extinguisher, dry powder Preparation for radio Cassette radio Radio and CD payer Rotating beacon Siding window in cab door Safety gass Seat heating with integrated a/c function Engine-independent heating Windscreen washer system Dust protection system Pressurized cabin system EQUIPMENT SERIES OPTION Working foodight on cab foor Working foodight on upper carriage Foodight, stick mounted Hydrauic oi preheating Cose proximity range imiter for stick Cooant and hydrauic oi eve monitoring system Hose rupture protection for ift cyinder Hose rupture protection for stick cyinder Dipperstick shock protection Lubrication of the grab suspension by centra ubrication system Overoad protection/ shutdown XENON foodight on stick XENON foodight on superstructure XENON foodight on cab roof Quick-connect couping on stick Fiter system for attachments 04
DIMENSIONS MHL335 1040 2800 5170 2550 1335 2335 2595 2485 1570 2680 2740 3000 4020 4370 3270 3490 with protective grating for cab roof MHL335 Transport dimensions E D A B C DIMENSIONS REACH 10.7 m (MULTI-PURPOSE STICK) REACH 11.0 m REACH 12.0 m A 10.100 mm 10.000 mm 10.000 mm B 5.350 mm 5.500 mm 4.400 mm C 1.185 mm 1.185 mm 1.185 mm D 3.250 mm / *3.470 mm 3.270 mm / *3.490 mm 3.270 mm / *3.490 mm E 2.780 mm 2.700 mm 3.000 mm * with protective grating for cab roof 05
WORKING RANGES/LIFTING CAPACITIES MHL335 12 11 10 9 8 Reach 11 m with stick Work equipment: Box-type boom 6.5 m; Stick 4.4 m; Cactus grab 7 6 5 4 3 2 1 0-1 -2-3 -4 13 12 11 10 9 8 7 6 5 4 3 2 1 0 3Reach in m Center of rotation 06
HEIGHT m 10.5 9 7.5 6 4.5 3 1.5 0-1.5 UNDERCARRIAGE STABILIZERS 4.5 6 REACHES m 7.5 9 10.5 non supported (5.7*) 4-pt. supported 5.7* (5.7*) non supported (6.3) (4.4) 4-pt. supported 6.3* (6.3*) 5.7* (5.7*) non supported (6.2) (4.4) (3.2) 4-pt. supported 6.4* (6.4*) 5.8* (5.8*) 5.0 (5.0*) non supported (6.1) (4.3) (3.2) 4-pt. supported 6.8* (6.8*) 6.0* (6.0*) 4.9 (5.5*) non supported (9.1) (5.8) (4.1) (3.1) (2.4) 4-pt. supported 9.7* (9.7*) 7.6* (7.6*) 6.4* (6.4*) 4.8 (5.6*) 3.8 (4.6*) non supported (8.3) (5.4) (3.9) (3.0) (2.4) 4-pt. supported 11.8* (11.8*) 8.6* (8.6*) 6.2 (6.9*) 4.7 (5.9*) 3.8 (4.7) non supported (7.7) (5.1) (3.8) (2.9) (2.4) 4-pt. supported 9.7* (9.7*) 8.4 (9.4*) 6.0 (7.4*) 4.6 (5.8) 3.7 (4.6) non supported (6.9*) (4.9) (3.6) (2.9) (2.3) 4-pt. supported 6.9* (6.9*) 8.2 (9.8*) 5.9 (7.5) 4.6 (5.7) 3.7 (4.6) non supported (4.8) (3.6) (2.8) 4-pt. supported 8.1 (9.5*) 5.8 (7.4*) 4.5 (5.7) RECOMMENDED ATTACHMENTS LIFT HOOKS TEREX FUCHS CACTUS GRAB 0.4 m 3 TEREX FUCHS CACTUS GRAB 0.6 m 3 TEREX FUCHS CACTUS GRAB 0.8 m 3 GRAB FOR LIGHTWEIGHT MATERIALS 1.2 m 3 MAGNET SYSTEM 10 t Open or haf-cosed shes Open or haf-cosed shes Open or haf-cosed shes Loose goods density up to 1400 kg/m 3 Terex Fuchs magnetic pate Capacity vaues are stated in metric tons (t). The pump pressure is 360 bar (5221 psi). The vaues, in accordance with ISO 10567, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through 360 on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Non-supported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, oad hook) must be deducted from the capacity vaues. In accordance with CE guideines, hoserupture safety vaves on the ift cyinders and an overoad warning device are required for crane operations. 07
WORKING RANGES/LIFTING CAPACITIES MHL335 13 12 11 10 9 Reach 12 m with stick Work equipment: Box-type boom 6.5 m; Stick 5.45 m; Cactus grab 8 7 6 5 4 3 2 1 0-1 -2-3 -4-5 -6 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 3Reach in m Center of rotation 08
HEIGHT m 10.5 9 7.5 6 4.5 3 1.5 0-1.5-3 UNDERCARRIAGE REACHES m STABILIZERS 4.5 6 7.5 9 10.5 12 non supported (4.4*) 4-pt. supported 4.4* (4.4*) non supported (4.5) (3.3) 4-pt. supported 5.1* (5.1*) 4.1* (4.1*) non supported (4.5) (3.3) (2.5) 4-pt. supported 5.1* (5.1*) 4.8* (4.8*) 3.2* (3.2*) non supported (4.4) (3.3) (2.5) 4-pt. supported 5.4* (5.4*) 5.0* (5.0*) 3.9 (4.4*) non supported (6.0) (4.2) (3.2) (2.5) 4-pt. supported 6.7* (6.7*) 5.8* (5.8*) 4.9 (5.2*) 3.9 (4.7*) non supported (8.8) (5.7) (4.0) (3.1) (2.4) (1.9) 4-pt. supported 10.1* (10.1*) 7.7* (7.7*) 6.3* (6.4*) 4.8 (5.5*) 3.8 (4.7) 2.9* (2.9*) non supported (8.0) (5.3) (3.8) (2.9) (2.3) (1.9) 4-pt. supported 12.3* (12.3*) 8.6 (8.8*) 6.1 (6.9*) 4.7 (5.8*) 3.7 (4.6) 3.1* (3.1*) non supported (7.5) (5.0) (3.7) (2.8) (2.3) 4-pt. supported 9.0* (9.0*) 8.3 (9.5*) 5.9 (7.3*) 4.6 (5.7) 3.7 (4.6) non supported (7.2) (4.8) (3.5) (2.8) (2.3) 4-pt. supported 7.4* (7.4*) 8.1 (9.6*) 5.8 (7.4*) 4.5 (5.6) 3.6 (4.5) non supported (3.5) 4-pt. supported 5.8 (7.1*) RECOMMENDED ATTACHMENTS LIFT HOOKS TEREX FUCHS CACTUS GRAB 0.4 m 3 TEREX FUCHS CACTUS GRAB 0.6 m 3 GRAB FOR LIGHTWEIGHT MATERIALS 1.0 m 3 MAGNET SYSTEM 10 t Open or haf-cosed shes Open or haf-cosed shes Loose goods density up to 1400 kg/m 3 Terex Fuchs magnetic pate Capacity vaues are stated in metric tons (t). The pump pressure is 360 bar (5221 psi). The vaues, in accordance with ISO 10567, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through 360 on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Non-supported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, oad hook) must be deducted from the capacity vaues. In accordance with CE guideines, hoserupture safety vaves on the ift cyinders and an overoad warning device are required for crane operations. 09
WORKING RANGES/LIFTING CAPACITIES MHL335 14 13 12 11 10 Reach 10.7 m with muti-purpose stick Work equipment: Box-type boom 6.5 m; Stick 4.0 m; Sorting grab 9 8 7 6 5 4 3 2 1 0-1 -2-3 -4-5 13 12 11 10 9 8 7 6 5 4 3 2 1 0 3Reach in m Center of rotation 10
HEIGHT m 10.5 9 7.5 6 4.5 3 1.5 0-1.5 UNDERCARRIAGE STABILIZERS 4.5 6 REACHES m 7.5 9 10.5 non supported (5.0*) 4-pt. supported 5.0* (5.0*) non supported (6.0) (4.1) 4-pt. supported 6.4* (6.4*) 5.1* (5.1*) non supported (5.9) (4.1) (2.9) 4-pt. supported 6.4* (6.4*) 5.8* (5.8*) 4.1* (4.1*) non supported (8.3*) (5.8) (4.0) (2.9) 4-pt. supported 8.3* (8.3*) 6.9* (6.9*) 5.9* (5.9*) 4.7 (5.8*) non supported (8.6) (5.5) (3.8) (2.9) 4-pt. supported 10.0* (10.0*) 7.6* (7.6*) 6.1 (6.3*) 4.6 (5.5*) non supported (7.9) (5.1) (3.7) (2.8) (2.2) 4-pt. supported 12.0* (12.0*) 8.5 (8.5*) 5.9 (6.8*) 4.5 (5.7) 3.5 (4.4) non supported (7.3) (4.8) (3.5) (2.7) (2.1) 4-pt. supported 7.4* (7.4*) 8.1 (9.2*) 5.8 (7.1*) 4.4 (5.6) 3.5 (4.4) non supported (6.3*) (4.6) (3.4) (2.6) 4-pt. supported 6.3* (6.3 *) 7.9 (9.4) 5.6 (7.2) 4.3 (5.5) non supported (3.3) 4-pt. supported 5.6 (6.9*) Capacity vaues are stated in metric tons (t). The pump pressure is 360 bar (5221 psi). The vaues, in accordance with ISO 10567, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through 360 on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Non-supported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, oad hook) must be deducted from the capacity vaues. In accordance with CE guideines, hose-rupture safety vaves on the ift cyinders and an overoad warning device are required for crane operations. 11
Terex Fuchs GmbH D-76669 Bad Schönborn Germany Te.: +49 (0) 72 53/ 84-0 Fax: +49 (0) 72 53/ 8 41 11 Web: www.terex-fuchs.de Emai: info@terex-fuchs.de DO MORE FASTER MHL335. More range. More capacity. More speed. In the recycing business, manoeuvring sometimes heavy oads without restriction on the radius of action cas for the mobie oading machine MHL335. The particuary robust undercarriage, with arger stabiizer cyinders and a stabiizer base of 5.1 x 4.3 m provides stabiity when oads of severa tons need to be moved with a reach of up to 12 metres. In such situations it is essentia that neither speed nor precision is compromised; the sewing motor and sewing gear are designed with this in mind and the ift and stick cyinders are fitted with specia end-cushioning. The MHL335 incorporates the most up-to-date drive and cooing technoogy. The separate cooing systems, consisting of a hydrostaticay driven fan for the oi cooer and a visco-cutch driven fan for iquid intercooing, combine exceent cooing power with quiet performance, enabing the machine to be used at ambient temperatures of up to 50 C. Optiona features are avaiabe for use in sorting sheds; these incude smoke partice fiters and a seaed cab with pressurized cabin system. Ergonomics and safety are aso high on the Terex Fuchs ist of priorities. The convenient and informative coour dispay enabes a important operating data to be taken in at a gance, and the heightadjustabe cab with its arge panoramic windows provides exceent a-round visibiity. Ergonomicay arranged contros and a backfriendy comfort seat are among the standard fittings. MHL335 vaid from machine no. 0130. 05.2008-GB (1.5). Printed in Germany. For further information pease contact your deaer or the Terex Fuchs saes department. Terex Fuchs reserves the right to continuay improve its products. Product specifications are subject to change without notice or obigation. The photographs and drawings in this brochure are for iustrative purposes ony. Refer to the appropriate Operator s Manua for instructions on the proper use of this equipment. Faiure to foow the appropriate Operator s Manua when using our equipment or to otherwise act irresponsiby may resut in serious injury or death. Prices and specifications subject to change without notice. The ony warranty appicabe is the standard written warranty appicabe to the particuar product and sae. Terex Fuchs provides no undertakings beyond the expressy agreed warranty conditions. Terex Corporation 2008 - Terex is a registered trade mark of the Terex Corporation in the United States of America and many other countries.