powerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying. Hole diameter : 64 89mm (2 1/2 3 1/2 ) : 64 115mm (2 1/2 4 1/2 )
Power and performance Atlas Copco s PowerROC rigs truly live up to their names with enough muscles for even tough conditions. & T35 is developed and designed for the demanding applications of construction operations, aggregate and limestone quarries.the & T35 with high penetration rate delivers the performance and power you need. Meanwhile, the COPLogic system in combination with the COP rock drills, with damper system ensures the low fuel consumptuion as well as the high hole quality. Main benefits Easy to operate and maintain due to straightforward design and ergonomic cab Straight holes and long drill steel life by using COPLogic system High penetration rate due to COP rock drills 2 3
highly available even in challenging rock conditions Thanks to the high degree of commonality with other Atlas Copco products and easy accessibility, you will get fast service and high uptime. MAIN COMPONENTS Track frames with triple grouser pads, hydraulic track oscillation and three speed traction Tier 4 (Stage IIIB) diesel engine / Tier 3 (Stage IIIA) diesel engine, Cummins QSB6.7 150kW / Cummins QSB6.7 142 kw Screw type air compressor Operator s cabin, ROPS and FOPS certified MAIN COMPONENTS Single / Extendable boom system Cylinder driven aluminium feed system Carousel type rod handling system Hydraulic rock drill Dust collection system ATLAS COPCO SERVICE Even the best equipment requires regular service to ensure optimal performance. Atlas Copco provides service + WORLD solutions CLASS to safeguard SERVICE an optimized relationship FlexiROC T35 between and FlexiROC T40 are flexible productivity, and versatile availability and operational tophammer drill cost. rigs, developed Atlas and designed Copco for high performance in demanding construction has applications. over They 3300 are technicians located in over Mining and Rock Excavation Technique 80 also a countries. very efficient alternative for By small and combining medi um size the usage of Atlas Copco genuine quarrying jobs. Even in parts tough terrain conditions, with utilization service provided by a certified of the rig is Atlas high, thanks to Copco the long reach of technician, the boom, you ll have a winning combination FlexiROC T35 and FlexiROC T40 are no flexible matter and versatile of where in the world you operate. tophammer drill rigs, developed and designed for high performance in demanding + Save money with a powerful performer With high availability and low fuel consumption, optimal use of impact force and overall ease-of-use, Atlas Copco s PowerROC rigs deliver a low Total Cost of Ownership (TCO). That means a fast return on investment and a healthy bottom line for your company. Not only that, because the machines are easy to use, training goes quick, so you re up and running as expected. + High quality blast holes The better the hole, the better the blast. Our CopLogic system adjusts to achieve the best drilling performance in real time with robust hydraulics and low number of moving parts. Whatever the rock condition is, you can be sure the PowerROC rigs will get you the high penetration rate, which means reducing consumables cost. Atlas Copco s COPLogic in combination with the COP rock drills, with damper system provides extremely good contact of the bit to the rock, for an optimal transfer of impact power. + A streamlined and powerful workhorse PowerROC rigs are straightforward designed. They come ready to work when you need. Good ergonomics, high visibility and ease-of-use mean high operator efficiency. The and T35 are sturdy workhorses, streamlined for efficiency and productivity day in and day out. engine Cummins turbo charged, diesel engine QSB 4.5, Tier 3/stage IIIA Power rating at 2300 rpm 119 kw 160 HP Cummins turbo charged, diesel engine QSB 6.7, Tier 3/stage IIIA Power rating at 2 300 rpm 142 kw 190 HP Cummins turbo charged, diesel engine QSB 6.7, Tier 4/stage IIIB Power rating at 2 300 rpm 150 kw 201 HP feed Hydraulic cylinder driven feed with hose guide with drill steel centralizer and movable dust hood Feed extension 1 500 mm 59 Feed rate, max 0.85 m/s 167 ft/min Feed force, max 19.6 kn 4 406 lbf Tractive pull, max 19.6 kn 4 406 lbf Total length 7 770 mm 306 Travel length 4 420 mm 174 BOOM Single boom for front face toe hole and etendable boom for vertical with wide coverage area are available Boom extension 800 mm 31 Boom lift angle 50 (above) 25 (below) Boom swing angle 55 (right) 10 (left) dust collector Filter area 13.8 m 2 149 sq.ft Number of filter elements 6 pcs. Cleaning air pressure, max 4.0 bar 58.0 psi Cleaning air volume 17 34 l/pulse 170N l/min Filter area 18.4 m 2 198 sq.ft Number of filter elements 8 pcs. Cleaning air pressure, max 4.0 bar 58.0 psi Cleaning air volume 17 34 l/pulse 170N l/min Compressor Screw type air compressor Working pressure, max 8.8 bar 128 psi FAD, at normal working pressure 101 l/s 215 cfm Screw type air compressor Working pressure, max 9.7 bar 140 psi FAD, at normal working pressure 130 l/s 276 cfm hydraulic system Hydraulic oil cooler Max ambient temperature 50 C 122 F electrical system Voltage 24 V Batteries 2 x 12 V, 120 Ah Alternator 24 V, 70 A Work lights, front 2 x 70 W Work lights, rear 3 x 70 W 1 x 70 W Reverse alarm volumes Hydraulic oil tank 200 l 53 US gal Hydraulic system, total 280 l 74 US gal Compressor oil 12 l 3.2 US gal Diesel engine oil 10 l 2.6 US gal Diesel engine, cooling water 32 l 8.4 US gal Diesel engine, fuel tank 380 l 100 US gal Hydraulic oil tank 200 l 53 US gal Hydraulic system, total 280 l 74 US gal Compressor oil 27 l 6.6 US gal Diesel engine oil 25 l 6.1 US gal Diesel engine, cooling water 33 l 8.7 US gal Diesel engine, fuel tank 380 l 100 US gal 4 5
Hole range Type of drilling Drill steel Drilling diameter Max. hole depth Drill steel length type mm inch m feet mm feet Single pass 3.66 12 4270 14 21 69 3050 x 6 10 x 6 Single boom T38, Extension 64 89 2 1/2 3 1/2 T45 25 (option) 82 (option) drilling Extendable boom 25 82 Single pass T38, T45, T51 3.66 12 4270 14 T38, T45 25 82 Extension drilling 64 115 2 1/2 4 1/2 (Single boom and extendable boom) T51 18 59 3660 x 4 12 x 4 Hydraulic rock drill Rock drill Impact power Hydraulic pressure Impact rate Torque, max Weight approx COP 1640+ 193 kg 425 lb 16 kw 21.5 hp 200 bar 2900 psi 60 Hz 530 Nm 390 lbf/ft COP 1640 EX+ 247 kg 544 lb COP 1840+ 700 Nm 516 lbf/ft 193 kg 425 lb 19 kw 25.5 hp 220 bar 3190 psi 49 Hz COP 1840 EX+ (980 Nm)* (723 lbf/ft)* 247 kg 544 lb dimensions and weight Transport dimensions Feed dumped 1 Single Extendable Height (H1) 3 300 mm 10 83 3 500 mm 11 48 Length (L1) 9 100 mm 29 86 9 100 mm 29 86 Width (W1) 2 360 mm 7 74 2 360 mm 7 74 Feed dumped 2 Height (H2) 2 900 mm 9 51 2 900 mm 9 51 Length (L2) 9 100 mm 29 86 9 400 mm 30 84 Width (w1) 2 360 mm 7 74 2 360 mm 7 74 Feed height 7 770 mm 25 49 Track Single Extendable l1 2 890 mm 9 6 3 160 mm 10 44 l2 4 440 mm 14 68 4 700 mm 15 5 Weight Tier 3 / Stage IIIA Single boom 11 900 kg 26 230 lb Extendable boom 12 300 kg 27 120 lb Tier 3 / Stage IIIA Single boom 12 100 kg 26 680 lb Exteandable boom 12 500 kg 27 560 lb Tier 4 / Stage IIIB Extendable boom 13 500 kg 29 770 lb H1 h1 L2 L1 l1 l2 H2 h2 * With 09 high torque rotaton motor W1 optional equipment Hydraulic cylinder feed system employs rigid aluminium feed beam with precise feed force, for longer drill steel life. Carrier Track chains with single grouser pads Super rotation system COP Logic for (hydraulic based) - Rotation pressure controlling - Feed speed - Feed speed controlling - Impact pressure - Feed pressure controlling - Impact pressure - Flushing air controling - Feed direction Feed Extractor on rock drill RHS for T38 SPEEDROD RHS for T38 with 55 mm coupling RHS for T45 SPEEDROD RHS for T45 with 63 mm coupling RHS for T45 with 66 mm coupling COP 1640+ or 1840+ rock drill, with the hydraulic based COPLogic control system, performs well in any conditions. Safety cabin Warning light BEACON type Media receiver (Radio included for Japan only) Driving mirror (L/R) LED light kit Rear view camera Hole measuring systems 2D angle indicator 3D angle indicator with speed and depth Extractor on rock drill RHS for T38 SPEEDROD RHS for T38 with 55 mm coupling RHS for T45 SPEEDROD RHS for T45 with 63 mm coupling RHS for T45 with 66 mm coupling RHS for T51 SPEEDROD RHS for T51 with 72 mm coupling Dust control Dust pre-separator Cabin is ROPS- and FOPS-certified, and is equipped with hydraulic pilot control joysticks. Lube oil, lube system and water mist system Water mist system (150 litres water tank) CE requirement Protection of rotation parts Delivered equipment, not mounted Gas charging equipment for rock drill Hydraulic pressure test kit Hydraulic oil filling hand pump kit Fuel filter upgrade kit 6 7
coverage areas and swing angles 1562 2632 988 2247 R3978 2969 R2295 1157 71 153 R3978 R2515 R2980 R4 3854 4209 530 1553 Horizontal reach (mm) 4718 25 4 4063 R25 24 1210 675 Vertical reach (mm) Toe hole drilling with re-pinning (mm) 1052 2170 F7 879 1355 48 59 45 45 20 20 90 4475 90 3389 3649 684 1302 2362 2866 1177 1891 Rear view (mm) Feed swing angles COMMITTED TO SUSTAINABLE PRODUCTIVITY We stand by our responsibilities towards our customers, towards the environment and the people around us. We make performance stand the test of time. This is what we call Sustainable Productivity. www.atlascopco.com 9851 3444 01c, 2015-08 Yokohama, Japan. Legal Notice Copyright 2015, Atlas Copco Construction and Mining Equipment Co., LTD. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.