ZN- (V1) Type ZN- (V1) Type ZN- (V1) type indoor high voltage vacuum circuit breaker (hereinafter referred to as circuit breaker) is used for indoor high voltage switch equipment of power system, as a protection and control unit of network equipment, industrial and mining enterprises power equipment, suitable for the place of frequent operation at rated working current or many of breaking short-circuit current place. The circuit breaker uses the integrated design of actuator and the circuit breaker body, not only can be used as a fixed install unit, also can be equipped with special chassis, handcart unit. Technical pecification 2 ZN-(V1). 6. The environment temperature: upper limit+0, lower limit -15 (allow storage at -30 ); ltitude: no more than m; aturated steam pressure: daily no larger than 2 10-3 Mpa, monthly average is not greater than 8 10-3 Mpa; Earthquake intensity does not exceed 8 degrees; Z N - / - () () () Design code ("" to be draw-out type) Indoor Vacuum circuit breaker current (RM) breaking The main galvanic circle resistance Mechanical property parameters Open clearance between contacts Overtravel Contact closing bounce time Three-phase, switching in different period μω 0 20 0/00 00 11±1 0±0.5 20 31 000 000 00 20 25 35 0 20 25 35 0 30 2 3 O-t-CO-1s-CO current less than 35, t=0.3s current 0, t=1s (less than ); 0 (less than ~); 30 (more than 20); verage opening speed verage closing speed Opening time (rated voltage) Closing time (rated voltage) 0.9~3 0.5~0.8 70 01 02
ZN- (V1) Type ZNM- (VCM1) Type Indoor High Voltage Permanent Magnetic Vacuum Circuit Breaker 8 652 681 2 76 598 33 8 ZN-(V1) 210 520 588 6 720 770 210 295 310 237 310 252 0 77 2 361 586 55 27 26 708 5 5 -M 2 -M ZNM-(VCM1) ZNM- (VCM1) type indoor high voltage permanent magnetic vacuum circuit breaker, belonging to the domestic advanced products. This products adopt independent research and development permanent magnetic actuator YG, with a manual opening and electric closing and opening function. Relieved complex, vulnerable omits energy storage and locking device of the traditional spring mechanism, greatly simplifies the transmission links, especially the manual tripping device, used for load emergency tripping operation when secondary loop fault, so as to realize the high reliability, long life, maintenance free, simple maintenance. The service life under normal conditions up to 30000. Z N M - / - Main Features Permanent magnetic actuator Design code Indoor Vacuum circuit breaker >>dvanced control technology and long life Due to adopt the high performance permanent magnet materials and the controller of microcomputer control technology design, through the company's proprietary, regulation of permanent magnetic actuator coil driving power, in order to obtain the best opening and closing curve of circuit breaker, and effective relize the opening and closing end soft landing, greatly reduces the mechanical collision, greatly improve the service life of mechanical components. lso exempted from the operation process, dynamic, static conducting pole accumulation mechanical deformation due to mechanical impact and the overtravel, open distance variation, superior performance of circuit breaker. >>imple structure, high reliability dapting a new design of permanent magnetic actuator, large output, light weight, convenient operation, reliable action. The decrease in the number of permanent magnetic actuator parts than the original spring machine more than 90%, no mechanical lock in the open and close positions. In the closing position, the permanent magnet using low magnetic impedance channel provided by dynamic, static iron core will remain the moving iron core in the closing position. In the off position, remain by the break spring. Mechanical drive, vacuum interrupter contacts smooth motion, without anti-closing, anti-opening, or error closing, error opening phenomenon. Manual switch is flexible and convenient. 03 0
ZNM- (VCM1) Type Indoor High Voltage Permanent Magnetic Vacuum Circuit Breaker ZNM- (VCM1) Type Indoor High Voltage Permanent Magnetic Vacuum Circuit Breaker >>Perfect function Power supply has strong adaptability, transform different external C / DC power by controller through modern power supply technology, make the mechanism operating under the optimal voltage conditions, the operation power is small. The controller has provided the circuit breaker with ' anti-jump ',' trip free 'and perfect' locking protection ' etc function. The controller software upgrades can be 'prograing on line', which makes the controller is convenient to meet the growing demand of relay protection. Technical pecification 2 >>Facilitate counication tandard counication interface, convenient networking, remote data exchange. ZNM-(VCM1) ll the information of circuit breaker can be transmitted to the central control room, can also accept all kinds of instruction from the central control room. >>trong anti-interference The electromagnetic compatibility capability can meet the requirement of national standard level Four, can avoid the proble caused by electromagnetic interference. () Close position ZN ZNM current (RM) breaking The main galvanic circle resistance μω 0 20 0/00 30000 20 31 000 000 00 20 25 35 0 20 25 35 0 30 O-t-CO-1s-CO current less than 35, t=0.3s current 0, t=1s (less than ); 0 (less than ~); 30 (more than 20); Open position t() Displacement curve 628() VCM1 76 2(295) (310) 8 652() 681() 598(586) 33(361) 05 06
VCP- Type VCP- Type VCP- type indoor high voltage vacuum circuit breaker is the indoor switch device for three-phase C, rated voltage power system, can be used for electrical equipment control and protection in power plant, substation and industrial and mining enterprises, and is suitable for frequent operation place, can be installed in the KYN28- type and other armored cabinet, can also be installed on the fixed cabinet or gas insulated cabinet. Technical pecification 2 VCP - / - () VCP- Design Feature () () Embedded pole indoor vacuum circuit breaker VCP- indoor medium voltage embedded pole vacuum circuit breaker (, 000, ) VCP indoor medium voltage embedded pole vacuum circuit breaker with maintenance free embedded vacuum pole, can equipped with modular spring assembling actuator and permanent magnetic actuator; has the features of reliable performance, long mechanical life, maintenance free, small mechanical movement, has the advantages of simple structure, good process performance, but also can be applied to all kinds of bad working environment. VCP circuit breaker pole adapts the solid insulation sealing technology, seal the vacuum interrupter and primary main galvanic circle and other parts into strong insulation, high mechanical strength pole with epoxy resin, avoid the influence of adverse operating environment on the primary circuit external insulation, realizes completely maintenance free. VCP circuit breaker adapt ultra low resistance type vacuum interrupter, meet the VCP circuit breaker requirements on the temperature rise at big current operation situation and reduces the power losses. VCP circuit breaker adapt optimization and modular spring operating mechanism, simple structure, stable performance, convenient maintenance; modular production process is good, easy standardization production, short delivery cycle. VCP- current (RM) breaking 0 0/00 0 20 20 31 000 20 25 35 0 20 25 35 0 30 O-t-CO-1s-CO current less than 35, t=0.3s current 0, t=1s 07 08
VCP- Type VCP-2 Type VCP draw-out type phase distance dimensions (embedded pole) VCP- VCP draw-out type phase distance 210 dimensions (embedded pole) VCP-2 type indoor high-voltage vacuum circuit breaker is indoor high voltage switchgear with rated voltage 2, three-phase C, applicable as control and protection switch in power distribution system of power plants, substations and 8 0 89 industrial and mining enterprises, especially suitable for breaking place with heave L load and frequent operation. Circuit breaker manufacturing confor to Chinese national standard GB1987-2003 D E L E D 2 310 295 76 78 165 77 18 33 598 170 361 586 7 689/735 VCP-2 "C high voltage circuit breaker", JB3855-1966 "6~0.5 indoor vacuum circuit breaker order technical conditions" and the related IEC standards, and has reliable interlock function. The circuit breaker structure design is front and back packaging, can be used as the fixed installation unit, and also can equipped with the chassis into central unit.. The environment temperature: upper limit +0, lower limit -15 ; ltitude: m; Earthquake intensity: less than 8 degrees; VCP - 2 / - () () () Embedded pole indoor vacuum circuit breaker Unit: Cabinet width Parameter P (space between phases) D E L Weight 6 0...25 1...35 1 1 2 2 535 535 86 86 105 105 0 0...25 1...35 210 210 652 652 681 681 8 8 0 0 0...35...0 130 130 09 10
VCP-2 Type VCP-2 Type Technical pecification VCP draw-out type phase distance 210 outline dimensions (small embedded pole type) 2 15 8 5 65 VCP-2 current (RM) breaking Mechanical property parameters Open clearance between contacts Overtravel Contact closing bounce time Three-phase, switching synchronism verage opening speed verage closing speed Opening time (rated voltage) Closing time (rated voltage) 0 20 20 /60 0 25 25 0/00 O-t-CO-1s-CO 0 15±1 5±0.5 1~7 0.6~1 20~ 35~70 31 35 35 () 0 () 0 Rated short-circuit breaking current ()...25...25 Rated short-circuit breaking current ()...25...25 Equipped static contact size () φ35 φ9 Equipped static contact size () φ35 φ9 7 300 77 70 196 325 310 652 681 VCP draw-out type phase distance outline dimensions (small embedded pole type) 7 15 300 VCP draw-out type phase distance outline dimensions (big embedded pole type) 10 77 70 196 325 310 VCP VCP 5 5 815 35 310 VCP () - Rated short-circuit breaking current ()...35 Equipped static contact size () φ79 300 60 737 70 196 20-31...35 φ109 11
ZNC- (V1-C) Type Indoor ide Installed High Voltage Vacuum Circuit Breaker ZNC- (V1-C) Type Indoor ide Installed High Voltage Vacuum Circuit Breaker ZNC- (V1-C) type indoor side installed high voltage vacuum circuit breaker is indoor high voltage switchgear, is suitable for three-phase power system with the rated voltage, frequency, used as a protective and control equipment, due to the special advantages of vacuum circuit breaker, particularly applicable to frequent operation under the rated current, or multiple breaking short circuit current location. ZNC- (V1-C) type indoor side installed high voltage vacuum circuit breaker adapts fixed installation, mainly used for fixed type switch cabinet, the circuit breaker can be used separately, but also can be used for ring network power supply, box type substation or various non-standard power supply system. 0 316 210 210 190 1 300 0 ZNC-(V1-C) The environment temperature: upper limit +0, lower limit -15 ; (llow storage at -30 ) ltitude: no more than m;. aturated steam pressure: daily average value is not higher than 2 10-3 Mpa, 6. monthly average is not higher than 8 10-3 Mpa; Earthquake intensity does not exceed 8 degrees; Technical pecification current (RM) 2 0 0,, 20 20 25 25 35 35 2-M 15 0 28 370 -M 106 20 820 80 direction direction 2:1 5 5 0 φ56 M18 breaking 90 Closing time O-0.3s-CO-1s-CO 70 00 1 196 Opening time Rated energy storage operating voltage Energy storage time V 10 00 13 1
ZN28- / ZN28- Type ZN28- / ZN28- Type ZN28- type indoor high voltage vacuum circuit breaker is high voltage indoor switch equipment of three-phase C, rated voltage 1 The product confor to the GB198-89 standard, the product structure has two for: the switch body and the actuator is mounted together or switch body and actuator installed separately. Integrated structure is ZN28- basic model; split structure is ZN28- type, suitable for various kinds of fixed type switch cabinet, such as GG-1 (Z), XGNZ-10 (Z) etc.. It can be equipped with CD17 type DC electromagnetic actuator and CT17, CT19 spring type operating mechanism. Technical pecification 2 ZN28- / ZN28-. The environment temperature: upper limit +0, lower limit -15 ; ltitude: m; Earthquake intensity: less than 8 degrees; Z N 28 - / - () () () : split structure Design code Indoor Vacuum circuit breaker ZN28- / ZN28- current (RM) breaking Mechanical property parameters Open clearance between contacts Overtravel Contact closing bounce time Three-phase, switching synchronism verage opening speed verage closing speed Opening time (rated voltage) Closing time (rated voltage) 0 0/00 00 11±1 ±1 0.9~3 0.~0.8 60 20 20 25 35 0 20 25 35 0 30 0 3 20 31 O-t-CO-1s-CO current less than 35, t=0.3s current 0, t=1s 015 016
ZN28- / ZN28- Type ZN23-0.5 Type Indoor Handcart Type High-voltage Vacuum Circuit Breaker ZN23-0.5 high voltage vacuum circuit breaker, is indoor high voltage distribution B2 B3 B2 device of three-phase C, rated voltage 0.5, can be matched with JYN- 35/GBC-35 type switch cabinet. uitable for control and protection in power plant, substation and power distribution system, especially suitable for frequent operation place. The vacuum circuit breaker is handcart type, with reasonable structure, convenient maintenance, safe and reliable use. Type H H1 H2 H3 1 2 B B1 B2 B3 ZN28- / ZN28- H H1 2 1 20 ZN28-/T 31-0 ZN28-/T-35 0 20 ZN28-/T - 35 52(85) 17 7 697 697 700 677 677 H2 H3 268 235 235 371 37 37 581 5 5 -φ16.5 3 3 B 390 330 330 B1 B 700 59 560 0 2 230 690 620 5 ZN23-0.5 The environment temperature: upper limit +0, lower limit -15 (cold area - 25 ); ltitude: not more than m;. aturated steam pressure: daily average value is not higher than 2 10-3 Mpa, 6. monthly average is not higher than 8 10-3 Mpa; Earthquake intensity does not exceed 8 degrees; Z N 23-0.5 / - () () () Design code Indoor Vacuum circuit breaker 5(657) 20K, 25K, 35K 0 70 Main Features The overall structure of circuit breaker is handcart type, use CT19 or CD10 mechanism, can be divided into JYN1 and GBC two kinds of structure. The circuit breaker body is composed of frame, insulator, vacuum interrupter, spindle and moving and static bracket. The bottom surface of the frame is equipped with wheels, for moving circuit breaker, etc. the right side of the frame is equipped with 6 insulator as support, fixed moving and static support use, vacuum interrupter installed between the dynamic, static support, the circuit breaker has the characteristics of small volume, simple structure, long service life, easy maintenance, no explosion danger, no pollution etc.. Code B B Data 2 610 690 017 018