ax: (604) 5-0070 Toll ree 1-800-98-1170 Series SIT Hydraulic Cylinders Single acting Internal Thread Pressure:,500 psi Working 3,500 psi Non-Shock Bore Sizes: 1.5 to 3.5 Rod Sizes: to 3.00 Ports: Attachments: 1/8 to 1/ Spherical Bearings Clevis Cross Hole ront lange Mount Rear lange Mount 09-1
ax: (604) 5-0070 Toll ree 1-800-98-1170 Our Series SIT is a Single acting Internal Thread displacement cylinder. With a pressure rating of 500 psi working and 3500 psi non-shock, the pressure acts on the rod to create an extend force that is equal to that of the pressure times the rod area. An external force, generally gravity, retracts the rod once the oil is allowed to leave the cylinder. The piston supports and guides the rod. The cylinder is well sealed at the rod end which will keep the inside of the cylinder barrel from becoming contaminated. The advantage of this design is that the inside of the barrel is not exposed to atmosphere and the rod is always immersed in oil when retracted which will keep the rod from corroding. Also, only one hydraulic pressure line is required in order to operate the cylinder, thus simplifying the hose routing. Since pressure acts on the area of the rod and not on the piston area, it is necessary to use a larger bore than a non-displacement type of cylinder design to exert the same force. There is a 1/16 plug at the rod end of the cylinder barrel which is provided to bleed air out of the cylinder during installation. This must be done in order to prevent the cylinder from becoming spongy due to the compressibility of the air trapped inside the cylinder. 1 3 4 5 PART NUMBERS Item 1 Item Item 3 Item 4 Item 5 Shipping weight (lb) (c/w clevis ends) Bore Rod Piston Rod Barrel Gland Seal Kit Base weight lb/inch Stroke 1 1 B3365-13 B3696 1661 4.46 0.46 1 1/ 1 B3365-15 Part Number is B3379 1435 5.85 0.63 1 1/ B3365-18 Model number and B3375 1434 6.94 0.8 Stroke B3365-0 ollowed by: B3373 1433 9.16 1.05 B3365-3 B for barrel R for rod B3371 143 11.63 1.45 3/4 1/ B3365-8 B3363 141 15.8.06 3 3 B3365-33 B3477 1539 0.39.78 09-
ax: (604) 5-0070 Toll ree 1-800-98-1170 See the Accessories section of the catalogue for rod end & blind end options. The CD (Pin Dia), the (Rod Extension) and KK (Thread) dimensions given are standard but they can be changed to suit any special requirements. Threaded and welded ends are both available. 1/16 H Dia Bore Rod CD A H 1 1 3.69.00 1/8 1 1/ 1.5 1 1/ 0.63.50.75 3.00 3/4 1/ 4.88 3.50 1/ 3 3 1.5 5.00 1/ MATERIAL SPECIICATIONS Barrel: DOM Tubing ASTM 513/519 Gr. 100/106 Head: Ductile Iron ASTM A536 (65-45-1) Piston: Ductile Iron ASTM A536 (65-45-1) Rod: C1045 Chrome Plated Accessories: Steel CSA G40-1 Gr. 44W Rod seal: Polyurethane Wear Ring: Reinforced Nylon Wiper: Polyurethane O-Ring: Nitrile Back-Up: Nitrile Bolts: SAE Grade 8 Seal Temperature Range: -65º to 5º (-54º C to 107º C) 09-3
Toll ree 1-800-98-1170 ax: (604) 5-0070 INDUSTRIES LTD. Spherical Blind End / Spherical Rod End 1/16 H dia CN CW Bore Rod CD A B H CN CW 1 1 7.01 3.69.00 1/8 0.41 1 1/ 1 7.38.5 1.19 0.63 1 1/ 0.63 7.38.50 1.13 1.31 0.56 8.13.75 1.5 1.44 0.69 9.05 3.00 1.50.30 3/4 1/ 9.18 4.88 3.50 1/ 1.50.30 3 3 1.5 9.30 5.00 1/ 1.88 3.10 0.94 1.09 Clevis Blind End / Clevis Rod End CN CW 09-4 1/16 H dia Bore Rod CD A B H CB CS 1 1 6.60 3.69.00 1/8 1.47 0.51 1.19 1 1/ 1 7.75.5 1.31 1.94 0.66 1.47 1 1/ 0.63 8.6.50 1.50.6 0.76 1.69 9.48.75 1.69.55 1.97 10.43 3.00.00 3.18 1.13.47 3/4 1/ 10.55 4.88 3.50 1/.00 3.18 1.13.47 3 3 1.5 10.68 5.00 1/.50 3.73 1.38.88
ax: (604) 5-0070 Toll ree 1-800-98-1170 Cross Hole Blind End / Cross Hole Rod End 1/16 H dia G D + Stroke W E Bore Rod CD A D E G H W 1 1 4.50 3.88 1.50.00 1/8 1 1/ 1 4.88 4.13 1.75.5 1 1/ 0.63 5.13 4.5 0.63.13.50 6.13 5.13 0.81.38.75 1.5 6.63 5.5 0.81.63 3.00 1.50 3/4 1/ 6.75 5.38 0.94 3.13 3.50.00 1/ 3 3 1.5 7.13 5.50 1.06 3.75.5 1/ Clevis Blind End / Spherical Rod End 1/16 H dia CB CS Bore Rod CD A B H CB CS 1 1 5.44 3.69.00 1/8 0.51 1.19 1 1/ 1 6.50.5 1.31 1.19 0.66 1.47 1 1/ 0.63 6.81.50 1.50 1.31 0.76 1.69 7.88.75 1.69 1.44 1.97 9.06 3.00.00.30 1.13.47 3/4 1/ 9.19 4.88 3.50 1/.00.30 1.13.47 3 3 1.5 10.60 5.00 1/.50 3.10 1.38.88 09-5
ax: (604) 5-0070 Toll ree 1-800-98-1170 ront lange Mount 1/16 PP H dia C + Stroke T V W See the Accessories section of the catalogue for rod ends. Bore Rod B C H T V W PP 1 1 3.69 1.31.00 1.38.00.75 13/3 1/8 1 1/ 1 1.63.5 1.38.13 3.00 13/3 1 1/ 1.63.50 1.38.50 3.50 15/3.5.75 1.50.63 3.63 15/3.5 3.00 1.50 3.00 4.5 17/3 3/4 1/ 4.88.38 3.50 1.50 3.50 17/3 1/ 3 3 5.00.38 1.50 5.5 11/16 1/ Rear lange Mount PP 1/16 H dia V T See the Accessories section of the catalogue for rod ends. W Bore Rod B H T V W PP 1 1 3.56.00.00.75 13/3 1/8 1 1/ 1 3.81.5.13 3.00 13/3 1 1/ 3.88.50.50 3.50 15/3 4.44.75.63 3.63 15/3 4.44 3.00 3.00 4.5 9/16 3/4 1/ 4.69 3.50 1.5 3.50 9/16 1/ 3 3 4.81 1.5 5.50 11/16 1/ 09-6