Square D General Purpose Relays Class 0R plug-in relays 0RS (SPDT) 0RS (DPDT) 0RS3 (3PDT) 0RS (PDT) Catalog 0
Contents Class 0R plug-in relays bbspecifications.................................................... 3 bbreferences... bbdimensions... 7 bbwiring diagrams...
Specifications Class 0R plug-in relays General Specifications Conforming to standards Product certifications 0RS(D)ppp 0RS(D)ppp 0RS(D)3ppp 0RS(D)ppp IEC/EN 0-, UL 0, CSA C- n, UL07--A culus File E30 CCN NLDX, NLDX7; curus File E30 CCN NLDX, NLDX; CSA; CE; RoHS compliant Ambient air temperature Storage C (F) - 0 to + (-0 to +) around the device Operation C (F) - 0 to + (-0 to +3) Vibration resistance In operation 3 gn (3 to 0 Hz) and ± mm (0 to 3 Hz) with and without retention clip conforming to IEC/EN 00-- Not operating gn (3 to 0 Hz) and ± mm (0 to 3 Hz) with and without retention clip Degree of protection Conforming to IEC/EN 0 IP0 Shock resistance In operation gn ( ms) conforming to IEC/EN 00--7 Not operating gn ( ms) Protection category RT I Mounting position Any Insulation Specifications Rated insulation voltage (Ui) V 0 (IEC), 300 (UL, CSA) Rated impulse withstand voltage (Uimp) kv (./0 µs) Dielectric strength Between coil and contact Vac 000 (rms voltage) Between poles Vac 000 Between contacts Vac 00 Contact Specifications Relay type 0RSppp 0RSDppp 0RSppp 0RSDppp 0RS3ppp 0RSD3ppp 0RSppp 0RSDppp Number and type of contacts C/O C/O 3 C/O C/O Contact materials Ag alloy with Au flash Conventional thermal For ambient A current (Ith) temperature y C Rated operational current Conforming to IEC in NO A at 0 Vac / Vdc utilization categories AC- and DC- NC A 7. at 0 Vac / Vdc Conforming to UL Resistive A at 0 Vac (00k cycles) at 77 Vac (00k cycles) at Vdc (00k cycles) Motor HP / at 0 Vac (k cycles) at 77 Vac (k cycles) Pilot Duty B300 Conforming to CSA Resistive A at 0 Vac (00k cycles) 0 at 77 Vac (00k cycles) at Vdc (00k cycles) at 0 Vac (00k cycles, 30 A max. total) 0 at 77 Vac (00k cycles, 0 A max. total) at Vdc (00k cycles, 30 A max. total) Motor HP / at 0 Vac (k cycles) at 77 Vac (k cycles) / at 0 Vac (k cycles) at 77 Vac (k cycles, HP max. total) Pilot Duty B300 Minimum switching requirement ma 0 at 7 Vdc Maximum switching voltage V 0 Vac / Vdc (IEC); 300 Vac / 30 Vdc (UL) Switching capacity Maximum Vac VA (UL), 370 (IEC) Vdc W 0 (UL & IEC) Minimum mw 70 (MCTF 0 Million) Maximum operating rate In operating cycles/hour No-load,000 Under load 00 Utilization coefficient 0% Mechanical durability Cycles 0,000,000 Electrical durability Resistive load 00,000 (unless otherwise specified) Operating cycles Inductive load See curve below Performance curves Electrical durability of contacts Resistive load (AC) Durability (Number of operating cycles) 0 7 0 0 0 3 Switching capacity (kva) Durability (inductive load) = durability (resistive load) x reduction coefficient. Reduction coefficient for inductive load (AC) (depending on power factor cos j) 0, Reduction coefficient (A) 0, 0, 0, 0,3 0, 0, 0, Maximum switching capacity on resistive load (DC) Y 0 0. 0 0 00 0 00 0 X 3
Specifications (continued) Class 0R plug-in relays Coil specifications Socket specifications Socket type 0NR 0NR 0NR3 0NR Relay types used Contact terminal arrangement Wire connection method Product certifications 0RSppp 0RSDppp 0RSppp 0RSDppp 0RS3ppp 0RSD3ppp Separate Screw clamp terminals curus File E CCN SWIV, SWIV; CSA; CE; RoHS compliant Conforming to standards IEC, UL 0, CSA. No. Electrical specifications Conventional thermal current (Ith) A at 300 Vac (UL) 0 at 300 Vac (UL) Insulation specifications Between adjacent output contacts Vrms 000 Between input and output contacts Vrms 000 Between contacts and DIN rail Vrms 000 General specifications Ambient air temperature around the device 0RSppp 0RSDppp Storage C ( F) - 0 to + (- 0 to + ) Operation C ( F) - 0 to + (- 0 to + 3) Degree of protection Conforming to IEC/EN IP 0 0 Connection Solid wire conductor. mm - AWG without conductors cable end 0.7 mm - AWG Flexible conductor. mm - AWG wire with conductors cable end 0.7 mm - AWG Maximum tightening torque / Screw size Lb-ft (.0) / M3. screw (N m) Mounting On 3 mm DIN rail / on panel Mounting on DIN rail By plastic clip Terminal referencing IEC, NEMA Compatible with hold down clip Yes Compatible with restraining strap No Wire connection method Screw clamp terminals 0RSppp 0RSDppp 0RS3ppp 0RSD3ppp 0RSppp 0RSDppp Average consumption () AC VA...7. DC W. 0... Average consumption with LED () AC VA...0. DC W.... Drop-out voltage threshold AC VA 0. Uc DC W 0.0 Uc Response time Operate time (at 00% Uc) AC ms 0 (max.) DC ms 0 (max.) Release time (at 00% Uc) AC ms 0 (max.) DC ms 0 (max.) Control circuit voltage Uc V 0 0 0 Relay control voltage codes V V3 V0 DC supply Average resistance at 0 C ± 0% 0RSD W 0 0 0RSD W 0 0 30 0RSD3 W 0 30 70 0RSD W 7. 303 370 Operating voltage limits Min. Vdc.. Max. Vdc 3...0 Relay control voltage codes V3 V V0 V AC supply Average resistance at 0 C ± % 0RS W 77 30 770 0RS W 77 30 770 0RS3 W 30 0 0 300 0RS W 0 0 00 000 Operating voltage limits Min. Vac.. Max. Vac 3.. 3 () Average consumption tolerance for 0RS(D), 3 and is +0% / -0%; average consumption tolerance for 0RS(D) is +0% / -%. 0RSppp 0RSDppp
References Class 0R plug-in relays 0RSPV0 0rsdpv 0RS3pV0 References Control circuit voltage Number and type of contacts - Thermal current (Ith) C/O - A C/O - A Unit reference Weight Unit reference Weight Plug-in relays with standard cover (sold in lots of ) Vdc 0RSDV 0.0/0.07 0RSDV 0.03/0.07 Vdc 0RSDV3 0.0/0.07 0RSDV3 0.03/0.07 0 Vdc 0RSDV0 0.0/0.07 0RSDV0 0.03/0.07 Vac 0RSV3 0.0/0.07 0RSV3 0.03/0.07 Vac 0RSV 0.0/0.07 0RSV 0.03/0.07 0 Vac 0RSV0 0.0/0.07 0RSV0 0.03/0.07 0 Vac 0RSV 0.0/0.07 0RSV 0.03/0.07 Plug-in relays with standard cover and LED (sold in lots of ) Vdc 0RSDPV 0.0/0.07 0RSDPV 0.03/0.07 Vdc 0RSDPV3 0.0/0.07 0RSDPV3 0.03/0.07 0 Vdc 0RSDPV0 0.0/0.07 0RSDPV0 0.03/0.07 Vac 0RSPV3 0.0/0.07 0RSPV3 0.03/0.07 Vac 0RSPV 0.0/0.07 0RSPV 0.03/0.07 0 Vac 0RSPV0 0.0/0.07 0RSPV0 0.03/0.07 0 Vac 0RSPV 0.0/0.07 0RSPV 0.03/0.07 Control circuit voltage Number and type of contacts - Thermal current (Ith) 3 C/O - A C/O - A Unit reference Weight Unit reference Weight Plug-in relays with standard cover (sold in lots of ) Vdc 0RSD3V 0.0/0. 0RSDV 0.07/0.7 Vdc 0RSD3V3 0.0/0. 0RSDV3 0.07/0.7 0 Vdc 0RSD3V0 0.0/0. 0RSDV0 0.07/0.7 Vac 0RS3V3 0.0/0. 0RSV3 0.07/0.7 Vac 0RS3V 0.0/0. 0RSV 0.07/0.7 0 Vac 0RS3V0 0.0/0. 0RSV0 0.07/0.7 0 Vac 0RS3V 0.0/0. 0RSV 0.07/0.7 Plug-in relays with standard cover and LED (sold in lots of ) Vdc 0RSD3PV 0.0/0. 0RSDPV 0.07/0.7 Vdc 0RSD3PV3 0.0/0. 0RSDPV3 0.07/0.7 0 Vdc 0RSD3PV0 0.0/0. 0RSDPV0 0.07/0.7 Vac 0RS3PV3 0.0/0. 0RSPV3 0.07/0.7 Vac 0RS3PV 0.0/0. 0RSPV 0.07/0.7 0 Vac 0RS3PV0 0.0/0. 0RSPV0 0.07/0.7 0 Vac 0RS3PV 0.0/0. 0RSPV 0.07/0.7 0rspv0
References (continued) Class 0R plug-in relays References (continued) Sockets Contact terminal arrangement Separate Connection Relay type Sold in lots of Screw clamp terminals Unit reference Weight 0RS(D)ppp 0NR 0.0/0.03 0 0NRB() 0.0/0.03 0RS(D)ppp 0NR 0.0/0. 0 0NRB() 0.0/0. Socket 0NR + Clip 0NH + Relay 0rsPv0 0RS(D)3ppp 0NR3 0.07/0. 0 0NR3B() 0.07/0. 0RS(D)ppp 0NR3 0.0/0.07 () Please note that the B suffix only desginates quantities of 0 and is not printed on the socket. 0 0NR3B() 0.0/0.07 Socket 0NR + Relay 0rsdpv Accessories Description For use with Sold in lots of Unit reference Weight Plastic ID clip 0NR socket Supplied with socket Metal hold-down clip 0NR socket 0 0NH 0.00/0.00 Metal hold-down clip 0NR3 socket 0 0NH 0.00/0.00 Metal hold-down clip 0NR3 socket 0 0NH 0.00/0.00 Socket 0NR3 + Relay 0rs3pv0
Dimensions Class 0R plug-in relays Dimensions: mm (in.) Plug-in relays 0RS, 0RSD 7.0 (0.) 0. (0.0). (0.).0 (0.) 7.3 (.07). (0.).0 (0.) 3. (.37) 0. (0.0). (0.0). (0.7) 0RS, 0RSD 7.0 (0.) 0. (0.0) 0.0. (0.). (0.3) 7.3 (.07) 7. (0.).0 (0.3) 3. (.37).7 (0.). (0.0). (0.) 0RS3, 0RSD3 7.0 (0.) 0. (0.0) 0.0 0.0. (0.). (0.3) 7.3 (.07) 7. (0.) 30. (.) 3. (.37).7 (0.) 0.0 0.0 (0.7) 0RS, 0RSD 7.0 (0.) 0. (0.0) 0.0 0.0 0.0. (0.). (0.3) 7.3 (.07) 7. (0.) 0. (.) 3. (.37).7 (0.) 0.0 30.0 (.) 7
Dimensions (continued) Class 0R plug-in relays Dimensions: mm (in.) Sockets 0NR 0NR Terminal Screws M3 X 0. Terminal Screws M3. X 0. Terminal Screws -3 x /". (.0) 7. (0.7) 7.0 (0.70) A A 3. (.0) 3. (0.).7 (.37). (.0) 3.30 (.30) 73.0 (.7) 0.0 (0.70) 7.7 (0.0) 7. REF (.7) 3. (.7) 7.3 DIA (0.70) TYP. 3. (.). (0.3).7 (0.).03 (0.00) 3.7 (.0).0 (.70). (.) 0NR3 0NR3 Terminal Screws -3 x." Terminal Screws -3 x." 7 3 3. (0.) 0 7 3. (.). (.) 7.0 (.). (.7). (0.) 0 3 3. (.). (.) 7.0 (.). (.7) 3.3 (.7) 3. (.) 0. (.). (0.3) 7.7 (.0). (.3). (.3) 0.3 (.). (0.3) 7.7 (.0)
Wiring diagrams Class 0R plug-in relays Wiring diagrams Plug-in relays 0RS, 0RSD 0RS, 0RSD () () () () () () () () () 3 (A) (A) 3 (A) (A) NEMA (IEC) NEMA (IEC) 0RS3, 0RSD3 0RS, 0RSD () () () () () 3 (3) () () () () () () 7 (3) () () 0 () () () 0 () (3) () 3 (A) (A) 3 (A) (A) NEMA (IEC) NEMA (IEC) Sockets 0NR 0NR 3 A A INPUT A 3 A 0NR3 0NR3 7 3 3 3 A 0 3 A A 3 0 3 A
Schneider Electric USA, Inc. 00 Knightdale Blvd. Knightdale, NC 7 Tel: -77-733 www.schneider-electric.com Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material. 0 Schneider Electric. All Rights Reserved. Schneider Electric and Square D are trademarks and the property of Schneider Electric SE, its subsidiaries and affiliated companies. All other trademarks are the property of their respective owners. 0CT0, /0 Replaces 0CT030R07/0, 0/00