PERFORMANCE YOU CAN RELY ON NEW! Peak precision paired with on-screen quality control (ASTM D6299) One Vapor Pressure Tester for All Applications: Gasoline, oxygenated gasoline, crude oil, LPG, solvents, fragrances, polymers and more all this with a single analyzer in full compliance with the latest standards such as ASTM D5188, D5191, D6377, D6378, D6897, EN 13016, etc. Approved by international governmental bodies including the EPA, CARB, US Military, NATO as well as all leading petroleum companies. ERAVAP VAPOR PRESSURE TESTING AT ITS BEST
Maximum Flexibility 7 color touchscreen for easy operation. Learning to operate the analyzer is a matter of seconds! ERAVAP was designed by an internationally renowned team of vapor pressure experts to cover a wide variety of different measurement scenarios. The first quality that catches the eye, however, is its push-button simplicity. The areas of application range from the use at terminals to freely programmable test methods for R&D laboratories. With its extended temperature range from -20 to 120 C (4 to 248 F) and V/L ratios down to 0.02 it can cope with the most difficult measurement scenarios as well as with routine analysis. An auto-switching power supply unit accepting voltage inputs between 85 and 264 V complements the broad applicability of ERAVAP. In combination with a 12 V power adapter it can be even field deployed and run by a vehicle battery. Unmatched Precision 4 1 temperature sensor 2 insulation 3 outlet valve 4 waste container 5 manifold 2 3 1 5 9 8 7 6 sample 7 inlet valve 6 8 measuring cell 9 piston with pressure sensor ERAVAP supports both piston-based mini methods ASTM D5191 and D6378 for vapor pressure measurement. These methods are currently the best received industry-wide, because they require no external vacuum pump. Of these two, the ASTM D6378 method is even easier to carry out, because it needs no sample preparation before the measurement. The triple expansion measurement principle used eliminates any operator bias. ERAVAP exceeds the precision statements of both methods. The outstanding precision of the ERAVAP is the result of combining the innovative measurement cell design with a choice of cutting-edge instrument parts. Among those count a self-lubricating piston drive, a built-in shaker motor and state-of-the-art solenoid valves that prevent cross contamination between samples. Therefore, the ERAVAP instrument clearly outperforms the standard methods in terms of repeatability and reproducibility (r = 0.3 kpa, R = 0.7 kpa). On-screen Quality Control ERAVAP performs quality assurance measurements in full compliance with ASTM D6299. It allows to monitor up to 8 quality control samples in parallel. This makes it easy to continuously verify the system s high performance on individual control charts for each different sample. To perform efficient quality control, the user can set individual warning levels to suit the measurement s parameters. In ERAVAP it is possible to set warning levels between 1 and 3 times the standard deviation. If a quality control sample measurement falls out of this range, the instrument automatically displays a warning message. There is no need to check the control chart manually. VAPOR PRESSURE TESTING AT ITS BEST
Autosampler for Unattended Analysis The 10-position autosampler lets you maximize your sample throughput while saving precious operator time. The sampler is directly attached and performs measurements without operator intervention. Unrivaled Speed The standard measurement time of ERAVAP is as little as 5 minutes. Paired with the unique VP-V/L Speed Test TM this makes it the fastest vapor pressure tester on the market. It can automatically measure T(V/L) values according to ASTM D5188 together with ASTM D5191 or ASTM D6378 vapor pressure values with a single click. The measurement results are displayed and stored under the same sample ID. When used with the optional 10-position autosampler the analyzer can perform up to 20 fully automated measurements. There is no need for operator intervention at all. Solid Durability With its quality-centric design ERAVAP is made for longest durability as well as peak performance. The self-lubricating measurement cell is the instrument s centerpiece. Powerful Peltier elements for heating boost its efficiency. Combined, these parts guarantee that the ERAVAP is built for highest sample throughput rates at minimum maintenance. Temperature and pressure calibrations are performed without disassembling the instrument, which reduces down-times to an absolute minimum. For fastest on-site recalibration even without certified equipment it is also possible to simply use pure substances to calibrate ERAVAP. ERAVAP
A Single ERAVAP... Standard Model: EV01 ERAVAP for gasoline, crude oil, T(V/L) and LPG Pressure range: 0 1000 kpa (0 145 psi, 0 10 bar) Temperature range: 0 120 C (32 248 F) Results: DVPE, RVPE, PABS, PGAS, PTOT, ASVP & AVP Temperature Extension Module: EV01-COOL Low Temperature Module This temperature extension module enables vapor pressure testing at temperatures below 0 C (32 F). It extends the standard measuring range to the total temperature range of -20 to 120 C (-4 to 248 F). ERAVAP can be easily upgraded anytime to include this low-temperature functionality. High Pressure Model for LPG according to ASTM D6897: EV02 ERAVAP LPG Pressure range: 0 2000 kpa (0 290 psi, 0 20 bar) Temperature range: 0 120 C (32 248 F) Optional upgrades: gasoline, T(V/L)... for All Applications With its innovative design ERAVAP measures gasoline, oxygenated gasoline, crude oil and LPG as well as any other solvent - even polymers can be characterized. It is used worldwide by various refineries, terminals, oil and pipeline companies as well as independent laboratories, car manufacturers and in aviation. A small footprint, true portability and its rugged aluminum casing make it the ideal choice even for mobile laboratories. It comes preconfigured with the correlation formulas developed by the US Environmental Protection Agency (EPA) for calculating the Reid vapor pressure according to ASTM D323 and ASTM D4953. The California Air Resource Board (CARB) relies on the unrivaled precision of ERAVAP as their reference instrument. The very same instrument is field deployed by the US military in mobile laboratories around the world. For special R&D applications ERAVAP offers individual programs for volatility studies over a wide temperature range and at very low V/L ratios. Curve programs are available for ASTM D5188, D5191, D6378, D6377 and D6897. VAPOR PRESSURE TESTING AT ITS BEST
Technical Specifications Available test methods ASTM D5188, D5191, D6377, D6378, D6897, EN 13016-1, EN 13016-2, IP394, IP409, IP481, JIS K2258-2,SHT 0769, GOST 52340 EPA/CARB/US Military & NATO reference methods Excellent correlation to ASTM D323, D2533, D4953, D5190, D5482 and D1267 Freely programmable methods Temperature range 0 to 120 C (32 to 248 F) with Peltier technology - No external cooling is required. EV01-COOL: -20 to 120 C (-4 to 248 F) - External cooling required Temperature stability 0.01 C (0.02 F) Pressure range EV01 ERAVAP: 0 to 1000 kpa (0 to 145 psi) EV02 ERAVAP LPG: 0 to 2000 kpa (0 to 290 psi) Pressure units (selectable) hpa, kpa, psi, mmhg, Torr, at, atm Pressure resolution 0.1 kpa (0.014 psi); Accuracy: 0.2 kpa (0.028 psi) Precision Repeatability: r = 0.3 kpa (0.044 psi), Reproducibility: R = 0.7 kpa (0.102 psi) Vapor / Liquid ratio Variable from 0.02/1 to 100/1 Single-point, multi-point and curve measurements Sample introduction Automated via built-in piston. No external vacuum pump is required Sample volume 1 ml (2.2 ml per rinsing cycle) Measurement time 5 minutes for a standard measurement Cleaning By next sample or solvent Display Industry proven 7 color touch screen Interfaces Built-in PC with Ethernet, USB and RS232 interfaces Direct LIMS connectivity via LAN and output to printer or PC Optional input by external keyboard, mouse and barcode reader Remote control Remote service capability via Ethernet interface Result database Over 100,000 detailed test reports storable in internal memory Operators Over 100 operator names storable Hazy mark Results can be marked for hazy appearance Alarm tracking All messages are stored in the database together with the results Automated calibration routine 10-point probe offset correction table, calibration history tracking, substance calibration, self-diagnostics Power requirements Auto-switching 85-264 V AC, 47-63 Hz, 100 W (multi-voltage power supply) Field application: 12 V/9 A DC (vehicle battery) Dimensions / Weight 22 x 32 x 28 cm (8.7 x 12.6 x 11 in) / 8 kg (17.6 lb) Due to continuing product development, specifications are subject to change. All eralytics products are manufactured under ISO 9001 regulations and are CE compliant. ERAVAP
PERFORMANCE YOU CAN RELY ON Fast & Easy Operation All eralytics analyzers use an intuitive menu structure that is easy to navigate. Samples need no prior preparation and measurements are done fully automated. The results are displayed immediately after the test on the large and userfriendly color touch screen. An internal memory holds the measurement results. For convenience, data can be directly saved to USB memory sticks for further processing or a thorough analysis. The data format is compatible with most PC spreadsheet programs, such as Microsoft Excel. Customized print-out designs are available for easy direct printing. Vapor pressure testing in four easy steps with ERAVAP Select the standard method Select/enter sample ID and operator name Put the inlet tubing into the sample Press RUN to start the fully automated measurement ERASOFT RCS Remote Control PC Software The RCS software by eralytics is the ideal tool for operating one or more eralytics analyzers via a PC. As an alternative to LIMS, it allows for convenient data transfer and fast analysis of results. It ideally supports the cuttingedge technology and functionalities built into the eralytics instruments. Multi-instrument networking Remote control Fast & easy data transfer (results, settings, etc.) Software upgrade Backup/restore for configurations and unit parameters VAPOR PRESSURE TESTING AT ITS BEST
Compact Stand-Alone Analyzer All eralytics instruments are compact stand-alone analyzers with a built-in industrial PC. They represent the latest in technology, designed for longterm, maintenance-free operation. Of course, all eralytics analyzers use cutting-edge industry technology and provide universal data transfer options. Ethernet and USB interfaces allow advanced data management and connectivity to PCs, modern printers, keyboards, PC-mice, barcode readers, or other external equipment. Direct LIMS Communication A direct out-of-the-box connection to LIMS (Laboratory Information Management System) is established with a standard Ethernet cable. No extra software or PC are necessary. True Portability The small footprint of the eralytics instruments makes them the first choice for use in the lab and on-site. Lightweight and built with an integrated carrying handle they are ideally suited for mobile applications. Large Results Memory Data are stored safely in the large results memory, which holds many thousand records. Six user levels and a state-of-the-art password technology protect your test result data from accidental deletion. Service and Remote Control over the Internet At the push of a button, firmware and software updates can be downloaded from the internet. The internet connection also allows to remotely control eralytics analyzers or to perform standard service activities. ERAVAP
Welcome to a New Era of Petroleum Testing Upgrade your lab to the 21st century. Leverage the accuracy, speed and comfortable ease of use that are characteristic of eralytics instruments. ERASPEC TM Spectral fuel analysis in seconds - The portable mid-ftir spectrometer that is fully automated and multi-fuel capable. With its patented design, it is perfect for fast gasoline, diesel & jet fuel analysis, delivering precise results for over 40 fuel parameters, like aromatics incl. benzene (ASTM D6277), oxygenates (ASTM D5845), FAME (EN 14078, ASTM D7806), etc. and many fuel properties like Octane, Cetane, Density, Distillation, etc. ERAFLASH TM The safe side of flashpoint testing - The first and only flashpoint tester on the market to cover the wide temperature range of -25 to 420 C in a single analyzer. Its small sample size and the continuously closed measuring chamber (ASTM D6450 & D7094) guarantee maximum safety and speed at minimum costs. ERASPEC OIL TM Portable FTIR oil analysis in seconds - The first truly portable stand-alone analyzer with a patented rugged FTIR spectrometer for high-speed lubricant oil condition monitoring in full compliance with ASTM, DIN and JOAP methods. With its lightweight build and small footprint, it is a welcome addition to mobile laboratories to deliver a detailed fingerprint of used oil on-site and check degradation and contamination within seconds. ERACHECK TM CFC-free oil-in-water testing - The portable analyzer with the patented QCL-IR technology for an extraction with the inexpensive and CFC-free solvent Cyclohexane. With its high speed and precision, it is the instrument of choice to detect even sub-ppm concentrations of total petroleum hydrocarbons (TPH) or total oil & grease (TOG) in water in full compliance with ASTM D7678. eralytics instruments are available worldwide. An international network of over 50 authorized and well trained dealers is ready to answer your inquiries and to offer local support and service. eralytics GmbH Lohnergasse 3, 1210 Vienna, Austria Phone: +43 1 890 50 330 Fax: +43 1 890 50 3315 office@eralytics.com www.eralytics.com