Cutting Technology to the Highest of Standards Quality since 1853
*Registered Trade Mark (Solingen, July 1, 147)
Compound Leverage Tin Snips FIGURE-CUTTING SNIPS for curvatures and short, straight cuts Heavy-duty model: Head made of drop-forged STAINLESS STEEL. Cutting edges induction hardened (58-62 HRC) and finely serrated. Handles made of sturdy stamped sheet steel, ergonomically designed, with red non-slip, kind-to-skin PVC coating and slip guard, plus built-in spring (self-opening). Cutting capacity: sheet thicknesses up to 1.8 mm, V2A sheets up to 1.2 mm, available in right-hand and left-hand cutting versions Light-duty model: Head made of drop-forged STAINLESS STEEL. Cutting edges induction hardened (54-58 HRC) and finely serrated. Handles made of sturdy stamped sheet steel, ergonomically designed, with red non-slip kind-to-skin PVC coating and slip guard, plus built-in spring (self-opening). Cutting capacity: sheet thicknesses up to 1.2 mm, V2A sheets up to 1.0 mm curved head: available in right-hand or left-hand cutting versions straight head: available in left-hand cutting version only IDEAL-PATTERN SNIPS for figures and straight cuts Heavy-duty model: Head made of drop-forged STAINLESS STEEL. Cutting edges induction hardened (58-62 HRC) and finely serrated. Handles made of sturdy stamped sheet steel, ergonomically designed, with red non-slip kind-to-skin PVC coating and slip guard, plus built-in spring (self-opening). Cutting capacity: sheet thicknesses up to 1.8 mm, V2A sheets up to 1.2 mm, available in right-hand and left-hand cutting versions Light-duty model: Head made of drop-forged STAINLESS STEEL. Cutting edges induction hardened (54-58 HRC) and finely serrated. Handles made of sturdy stamped sheet steel, ergonomically designed, with red non-slip kind-to-skin PVC coating and slip guard, plus built-in spring (self-opening). Cutting capacity: sheet thicknesses up to 1.2 mm, V2A sheets up to 1.0 mm, available with right-hand or left-hand cutters *Registered Trade Mark (Solingen, July 1, 147) Designation Length Type of cutters mm " g 71-240 light-duty figure snips 240 1 /2 right-hand 380 6 71-241 light-duty figure snips 240 1 /2 left-hand 380 6 71-242 light-duty figure snips 240 1 /2 straight, left-hand 380 6 72-260 heavy-duty figure snips 260 10 1 /2 right-hand 500 5 72-261 heavy-duty figure snips 260 10 1 /2 left-hand 500 5 73-240 light-duty ideal snips 240 1 /2 right-hand 380 6 73-241 light-duty ideal snips 240 1 /2 left-hand 380 6 74-260 heavy-duty ideal snips 260 10 1 /2 right-hand 540 5 74-261 heavy-duty ideal snips 260 10 1 /2 left-hand 540 5 157
STANDARD TIN SNIPS Embodiments: STAINLESS STEEL Drop-forged, with cutting edges induction hardened to 58-62 HRC, ground and sand-blasted. Handles with red non-slip kind-to-skin PVC coating and anti-squeeze guard. Available with pivoted spring (optional). *Registered Trade Mark (Solingen, July 1, 147) HIGH-GRADE STEEL Drop-forged, with cutting edges induction hardened to 54-58 HRC, ground and sand-blasted. Handles with blue non-slip kind-to-skin PVC coating and anti-squeeze guard. Available with pivoted spring (optional). Types and uses: BERLIN-PATTERN SNIPS for long, straight cuts HOLE-CUTTING SNIPS for short, straight cuts and figures IDEAL-PATTERN SNIPS for straight cuts and figures PELICAN-PATTERN SNIPS for long, straight cuts, especially good for cutting metal sheets UNIVERSAL SNIPS for long, straight cuts and figures AMERICAN-PATTERN SNIPS for long, straight cuts 158
STANDARD SNIPS Designation Length Embodiment Cutting hand mm " 76-250 Berlin-pattern 250 10 stainless steel right 550 5 76-275 Berlin-pattern 275 11 stainless steel right 650 5 76-300 Berlin-pattern 300 12 stainless steel right 700 5 77-300 Pelican snips 300 12 stainless steel right 50 5 78-250 Hole-cutting snips 250 10 stainless steel right 450 5 78-251 Hole-cutting snips 250 10 stainless steel left 450 5 78-275 Hole-cutting snips 275 11 stainless steel right 470 5 78-276 Hole-cutting snips 275 11 stainless steel left 470 5 78-300 Hole-cutting snips 300 12 stainless steel right 700 5 78-301 Hole-cutting snips 300 12 stainless steel left 700 5 7-260 Ideal-pattern 260 10 1 /2 stainless steel right 450 5 7-261 Ideal-pattern 260 10 1 /2 stainless steel left 450 5 7-280 Ideal-pattern 280 11 stainless steel right 560 5 7-281 Ideal-pattern 280 11 stainless steel left 560 5 80-24 Universal snips 250 10 stainless steel right 450 5 80-250 Berlin-pattern 250 10 high-grade steel right 550 5 80-275 Berlin-pattern 275 11 high-grade steel right 650 5 80-300 Berlin-pattern 300 12 high-grade steel right 750 5 81-300 Pelican snips 300 12 high-grade steel right 50 5 82-250 Hole-cutting snips 250 10 high-grade steel right 450 5 82-251 Hole-cutting snips 250 10 high-grade steel left 450 5 82-275 Hole-cutting snips 275 11 high-grade steel right 470 5 82-276 Hole-cutting snips 275 11 high-grade steel left 470 5 82-300 Hole-cutting snips 300 12 high-grade steel right 700 5 82-301 Hole-cutting snips 300 12 high-grade steel left 700 5 83-260 Ideal-pattern 260 10 1 /2 high-grade steel right 450 5 83-261 Ideal-pattern 260 10 1 /2 high-grade steel left 450 5 83-280 Ideal-pattern 280 11 high-grade steel right 560 5 83-281 Ideal-pattern 280 11 high-grade steel left 560 5 84-250 Universal snips 250 10 high-grade steel right 450 5 85-200 American-pattern 200 8 high-grade steel 240 6 85-250 American-pattern 250 10 high-grade steel 440 6 85-300 American-pattern 300 12 high-grade steel 660 6 STANDARD SNIPS WITH HSS-TIPPED CUTTING EDGES These standard snips have tungsten-carbide HSS cutting edges (HRc 65-67) for up to 15 times longer service lives and maximum cutting performance, especially for hard stainless steel (V2A) and similarly critical varieties of sheet steel. Compound-leverage ideal-pattern snips for straight cuts and figures available in right-hand and left-hand cutting versions Pelican snips for long, straight cuts and figures available in right-hand cutting version only Ideal snips for straight cuts and figures available in right-hand and left-hand cutting versions Punch snips for short-straight cuts and figures (wide radii) available in right-hand and left-hand cutting versions Designation Length Embodiment Cutting hand mm " g 74-HSL Ideal snips, compound-leverage 260 10 1 /2 HSS left 550 1 74-HSR Ideal snips, compound-leverage 260 10 1 /2 HSS right 550 1 77-HSR Pelican snips 300 12 HSS right 60 1 78-HSL Hole-cutting snips 275 11 HSS left 480 1 78-HSR Hole-cutting snips 275 11 HSS right 480 1 7-HSL Ideal snips 280 11 HSS left 570 1 7-HSR Ideal snips 280 11 HSS right 570 1 15
JEWELER S/ LIGHT-SHEET SHEARS Made of drop-forged special tool steel, hardened to 54-58 HRc, ground and sand-blasted. Cutting edges hardened and polished bright handles with high-quality protective coating, open or closed shape and/or with grip ring Handy universal snips for cutting thin sheets. Available with straight or curved cutters Designation Length Embodiment mm " cutters handle g 86-180 Jeweler s snips 175 7 straight open 105 12 86-181 Jeweler s snips 175 7 curved open 105 12 87-180 Jeweler s snips 175 7 straight closed 105 12 87-181 Jeweler s snips 175 7 curved closed 105 12 88-180 Jeweler s snips 175 7 straight grip ring 105 12 88-181 Jeweler s snips 175 7 curved grip ring 105 12 TIN NIBBLERS Universal nibbler 75-200 For precision cutting of marked-out holes and figures. Leaves no burrs and neither damages nor deforms the surrounding material. Embodiment: sturdy steel body with compound leverage and built-in opening spring nibbler head with replaceable blade full closure of the nibbler for automatic chip severance supplementary wire cutter for up to 3 mm-thick wires galvanized handles with red non-slip kind-to-skin PVC grips CUTTING CAPACITY: sheet steel up to 1.2 mm thick (18 gauge) aluminum, copper and plastic sheets up to 2 mm thick 160 Designation Length mm " g 75-200 Universal nibbler 265 10 1 /2 500 1 75-201 Spare blade 75-202 Spare cutting guard 75-203 Spare bolts 75-204 Spare spring Special nibbler 75-300 for quick and easy cutting of branch-connection holes in eaves troughs, air ducts, step profiles and sundry problematic geometries, e.g., concave sheets, corrugated sheet steel/plastic, pipes and tubes Especially helpful for installing loudspeakers, rear wipers and the like in automobiles Designation Length mm " g 75-300 Special nibbler 265 10 1 /2 470 1 75-203 Spare bolts 75-301 Spare blade 75-302 Spare jaws
CABLE CUTTERS Light-duty model: head made of stainless steel self-opening, with tough plastic grips For cutting cables with thicknesses up to 10 mm Designation Length mm " g 1-160 Light-duty cable cutter 160 6 1 /2 110 12 Heavy-duty model: head made of drop-forged and hardened high-grade steel, with induction-(re)hardened cutting edges handles with red non-slip kind-to-skin PVC coating For cutting copper cables up to 50 mm thick (single-core) or 5 mm thick (fine-strand) [HO 7 V-K] as well as multicore cables (up to 35 mm, e.g., 4 x 6 mm), plastic-sheathed cables with diameters up to 20 mm. Clean, smooth cut thanks to extremely acute cutting angle - no pinch effect Designation Length mm " g 1-200 Heavy-duty cable cutter 200 8 350 1 Heavy-duty VDE-insulated model head made of drop-forged and hardened high-grade steel, with induction-(re)hardened cutting edges handles with insulated grips as per VDE IEC DIN 78 (Co) 11/0680/ T201/07.83/ IEC 00 For cutting copper and plastic-sheathed cables carrying up to 1000 Volt. Designation Length mm " g 1-210 Cable cutter, VDE 200 8 350 1 161
MULTI-PURPOSE CUTTERS Embodiment: head made of stainless steel, with sharp-serrated cutting edges, self-opening, with tough plastic grips Multi-purpose cutters for industrial and artisanal uses, extra-sturdy type, cuts thin sheet, wire, plastic, rubber, leather, cardboard, paper, carpets, flowers, branches, etc. practical one-hand metal safety catch Multi-purpose cutter, DIY model, for home and garden, with practical one-hand plastic safety catch Designation Length mm " g 3-140 Multi-purpose 140 5 1 /2 50 12 3-10 Multi-purpose 10 7 1 /2 100 12 3-11 Multi-purpose, DIY 10 7 1 /2 100 24 INDUSTRIAL / PROFESSIONAL SHEARS Embodiment: drop-forged and hardened special tool steel, with polished cutting edges, black-painted handles; one long and one round grip ring For cutting thick paper, cardboard, thin rubber, leather and textiles. Embodiment Length mm " g 5-200 offset 200 8 200 6 5-250 offset 250 10 370 6 162
WIRE / TELEPHONE / ELECTRICIAN S SCISSORS Embodiment: short-sturdy design with serrated bottom blade, incl. wire cutter. Nickel-plated blades, PVC-coated handles. Telephone/cable scissors pointed Wire-cutting/electrician s scissors For cutting thin wires, insulating tubes, rubber, leather, etc. Designation Length Embo mm " diment g 0-140 Telephone/cable 140 5 1 /2 serrated 5 12 1-125 Wire/electrician 125 5 serrated 70 12 MULTI-PURPOSE SCISSORS Embodiment: stainless steel blades tough plastic grips with soft-plastic liners adjustable hinge screw Very versatile for cutting paper, cloth, etc. Embodiment Length mm " g 6-180 straight 180 7 45 24 6-210 offset 210 8 1 /4 80 24 PAPER / PAPER HANGER S SCISSORS Embodiment: drop-forged and hardened nickel-plated two round grip rings For long, straight cuts, especially for paper and wallpaper Embodiment Length mm " g 4-200 straight 200 8 110 12 4-250 straight 250 10 150 12 163
TURNUS TURNUS Numerical index 101-100 126 101-101 126 101-120 126 101-130 126 101-131 126 101-145 126 101-146 126 101-160 126 101-180 126 101-181 126 101-200 126 101-201 126 102-120 126 103-180 126 103-181 126/127 103-182 126 103-200 126 103-202 126/127 103-211 126/127 106-145 127 106-180 127 106-200 127 106-201 127/128 106-202 127 107-200 127 107-202 127 10-160 128 10-162 128 10-180 128 10-181 128 10-182 128 10-200 128 10-201 128 10-250 128 10-251 128 10-252 128 112-125 128 112-150 128 113-115 128 113-116 128 113-117 128 113-130 128 113-131 128 113-132 128 201-002 12 201-003 12 201-004 12 201-005 12 201-006 12 201-007 12 201-008 12 201-00 12 201-010 12 201-011 12 201-012 12 201-013 12 201-014 12 201-015 12 201-016 12 201-017 12 201-018 12 201-01 12 201-020 12 201-021 12 201-022 12 201-024 12 201-027 12 201-030 12 201-032 12 201-036 12 201-105 12 201-205 12 201-305 12 201-405 12 201-505 12 201-0 130 202-20 130 202-0 130 203-080 130 203-100 130 203-110 130 203-208 130 203-280 130 204-002 12 204-003 12 204-004 12 204-005 12 204-006 12 204-008 12 204-00 12 204-010 12 204-011 12 204-012 12 204-013 12 204-014 12 204-017 12 204-01 12 204-022 12 204-024 12 204-027 12 204-105 12 204-305 12 204-405 12 204-505 12 204-808 131 204-80 131 204-0 131 204-0 131 205-003 131 205-004 131 205-005 131 205-006 131 205-008 131 205-010 131 205-012 131 205-014 131 205-01 131 205-022 131 205-101 131 205-102 131 205-103 130 205-104 130 205-10 130 205-202 130 205-204 130 207-008 130 207-010 130 207-011 131 207-012 131 207-180 130 207-280 130 210-005 133 210-006 133 210-008 133 210-010 133 210-012 133 210-014 133 210-016 133 211-505 134 211-506 134 211-507 134 211-508 134 211-50 134 211-510 134 211-515 134 211-520 134 211-515 134 211-520 134 211-525 134 211-527 134 211-530 134 211-540 134 211-545 134 211-550 134 211-555 134 211-560 134 211-60 134 211-610 134 211-615 134 211-620 134 211-625 134 211-627 134 211-630 134 211-640 134 212-108 135 212-10 135 212-110 135 212-115 135 212-120 135 212-125 135 212-215 135 212-127 135 212-130 135 212-140 135 212-145 135 212-150 135 212-220 135 212-225 135 212-227 135 212-230 135 212-240 135 212-245 135 212-250 135 212-258 134 212-25 134 212-260 134 213-002 132 213-003 132 213-004 132 213-005 132 213-006 132 213-007 132 213-008 132 213-010 132 213-012 132 213-127 132 213-15 132 213-18 132 213-238 132 213-277 132 213-318 132 213-357 132 213-37 131 213-476 132 213-556 132 213-635 132 213-74 132 213-53 132 213-0 133 214-002 132 214-003 132 214-004 132 214-005 132 214-006 132 214-007 132 214-008 132 214-010 132 214-310 135 214-410 135 214-415 135 214-510 135 214-515 135 214-615 135 214-620 135 214-815 135 214-820 135 214-10 135 215-000 133 215-001 133 215-002 133 215-003 133 215-006 133 222-00 135 222-100 135 223-121 135 223-150 135 223-200 135 224-100 135 224-150 135 224-200 135 225-101 135 225-150 135 225-200 135 226-100 135 226-150 135 226-200 135 228-100 135 228-150 135 228-200 135 230-100 135 230-150 135 230-200 135 238-11 12 238-127 12 238-15 12 238-18 12 238-238 12 238-277 12 238-318 12 238-357 12 238-37 12 238-476 12 238-556 12 238-635 12 238-714 12 238-74 12 238-873 12 238-53 12 23-111 12 23-127 12 23-143 12 23-15 12 23-10 12 23-220 12 23-254 12 240-15 12 240-18 12 240-238 12 240-318 12 240-357 12 240-37 12 240-476 12 240-556 12 240-635 12 240-714 12 240-74 12 240-873 12 240-53 12 241-111 12 241-127 12 241-42 12 241-588 12 241-05 12 241-220 12 241-540 12 250-010 136 250-015 136 250-020 136 250-025 136 250-030 136 250-035 136 250-042 136 250-043 136 250-044 136 250-045 136 250-120 137 250-130 137 250-140 137 250-160 137 250-170 137 250-180 137 250-10 137 250-500 136 250-520 136 250-540 136 250-545 136 250-550 136 250-560 136 250-570 136 325-001 140 325-002 140 325-003 140 325-004 140 325-005 140 325-006 140 325-007 140 325-008 140 325-00 140 325-010 140 325-011 140 325-012 140 325-013 140 325-014 140 325-015 140 325-016 140 325-017 140 325-018 140 325-020 140 325-120 140 326-002 140 326-003 140 326-004 140 326-005 140 326-006 140 326-007 140 326-008 140 326-00 140 326-010 140 326-011 140 326-012 140 326-013 140 326-014 140 326-015 140 326-016 140 326-017 140 326-018 140 326-01 140 326-020 140 326-021 140 326-022 140 326-023 140 326-024 140 326-025 140 326-026 140 326-027 140 326-028 140 326-02 140 326-030 140 326-031 140 326-032 140 326-033 140 326-034 140 326-035 140 326-036 140 326-037 140 326-038 140 326-03 140 326-040 140 326-042 140 326-043 140 326-044 140 326-045 140 326-046 140 326-047 140 326-048 140 326-04 140 326-050 140 326-055 140 326-060 140 326-065 140 326-070 140 326-075 140 326-080 140 326-00 140 326-100 140 326-120 140 328-102 141 328-103 141 328-104 141 328-105 141 328-106 141 328-108 141 328-110 141 328-112 141 32-202 141 32-203 141 32-204 141 32-205 141 32-206 141 32-208 141 32-210 141 32-212 141 330-002 141 330-003 141 330-004 141 330-005 141 330-006 141 330-007 141 330-008 141 330-00 141 330-010 141 330-012 141 330-015 141 330-020 141 331-002 141 331-003 141 331-004 141 331-005 141 331-006 141 331-007 141 331-008 141 331-010 141 331-012 141 331-015 141 331-020 141 343-035 144 343-050 144 343-060 144 344-010 142 344-011 142 344-020 142 344-021 142 344-030 142 344-031 142 344-050 142 344-051 142 344-080 142 344-081 142 344-100 142 344-101 142 344-150 142 344-151 142 344-200 142 344-201 142 347-000 143 347-344 143 347-345 143 347-346 143 348-100 143 348-101 143 348-125 143 348-150 143 164
TURNUS TURNUS Numerical index 348-151 143 348-200 143 348-201 143 34-300 143 34-301 143 34-400 143 34-401 143 34-500 143 34-501 143 34-600 143 34-601 143 350-152 144 350-202 144 350-252 144 351-152 144 351-202 144 351-252 144 352-152 144 352-202 144 352-252 144 353-152 144 353-202 144 353-252 144 354-152 144 354-202 144 354-252 144 355-000 144 355-060 144 356-006 145 357-71 145 357-72 145 357-73 145 357-74 145 35-40 145 358-500 145 358-501 145 358-502 145 358-503 145 358-550 145 358-551 145 358-552 145 358-553 145 360-100 126 360-200 126 360-300 126 360-400 126 360-500 126 370-100 126 370-150 126 370-200 126 370-250 126 370-300 126 370-400 126 370-500 126 401-006 123 401-00 123 401-010 123 420-028 125 420-053 125 420-078 125 420-105 125 420-130 125 420-155 125 420-206 125 430-028 125 430-040 125 430-055 125 430-070 125 430-105 125 431-001 123 431-002 123 431-003 123 431-004 123 431-401 123 432-200 123 433-070 114 440-150 124 441-050 124 441-265 124 441-580 124 441-600 124 442-400 124 442-600 124 450-050 124 450-100 124 450-130 124 450-260 124 46-010 120 46-012 120 46-016 120 46-020 120 46-025 120 46-030 120 46-040 120 46-050 120 46-060 120 46-080 120 46-100 120 46-125 120 46-150 120 470-012 11 470-016 11 470-020 11 470-025 11 470-030 11 470-040 11 470-060 11 470-080 11 470-080 11 470-100 11 470-125 11 470-150 11 471-030 121 471-060 121 471-100 121 471-101 121 471-102 121 472-016 121 472-020 121 472-025 121 472-030 121 472-040 121 472-050 121 472-060 121 472-080 121 472-100 121 473-020 11 473-025 11 473-030 11 473-040 11 473-050 11 473-060 11 475-025 11 475-030 11 475-050 11 475-080 11 475-100 11 475-125 11 475-150 11 480-030 11 480-040 11 480-050 11 480-060 11 480-080 11 480-100 11 485-010 122 485-020 122 40-120 115 40-160 115 40-200 115 40-250 115 40-300 115 40-400 115 41-040 115 41-050 115 41-060 115 41-080 115 41-100 115 41-125 115 41-150 115 41-180 115 41-200 115 41-220 115 41-250 115 41-300 115 41-350 115 473M020 120 473M025 120 473M030 120 473M040 120 473M050 120 473M060 120 475M025 120 475M030 120 475M050 120 475M080 120 475M100 120 475M125 120 475M150 120 480M030 120 480M040 120 480M050 120 480M060 120 480M080 120 480M100 120 500-100 116 500-120 116 500-160 116 500-200 116 500-250 116 500-300 116 500-400 116 500-304 116 500-306 116 500-310 116 500-406 116 500-408 116 500-410 116 501-040 116 501-050 116 501-060 116 501-080 116 501-100 116 501-125 116 501-150 116 501-180 116 501-200 116 501-250 116 501-300 116 503-012 117 503-016 117 503-020 117 503-025 117 503-030 117 503-040 117 504-020 117 504-025 117 504-030 117 504-040 117 504-050 117 504-060 117 504-075 117 504-080 117 504-100 117 504-125 117 504-150 117 505-040 116 505-060 116 505-080 116 505-100 116 506-040 116 506-060 116 506-080 116 506-100 116 507-040 116 507-060 116 507-080 116 507-100 116 508-040 116 508-060 116 508-080 116 508-100 116 50-030 116 50-060 116 50-080 116 516-110 125 516-155 125 500P120 115 500P160 115 500P200 115 500P250 115 500P300 115 500P400 115 501P040 115 501P050 115 501P060 115 501P080 115 501P100 115 501P125 115 501P150 115 501P180 115 501P200 115 501P250 115 501P300 115 685-100 152 685-200 152 686-250 152 60-125 151 60-180 151 60-250 151 60-300 151 61-180 151 61-250 151 61-300 151 62-250 151 63-250 151 64-275 151 65-280 152 66-280 152 67-280 152 68-280 152 720-250 148 720-251 148 721-240 148 721-241 148 724-240 148 724-241 148 725-180 14 725-181 14 725-182 14 726-160 14 726-161 14 727-160 14 727-161 14 728T-A1 150 728T-A2 150 728T-A3 150 728T-A4 150 728T-A11 150 728T-A21 150 728T-A31 150 728T-A41 150 728T72 150 72T-J1 150 72T-J2 150 72T-J3 150 72T-J4 150 72T-J11 150 72T-J21 150 72T-J31 150 72T-J41 150 731-180 150 732-225 150 735-320 147 735-420 147 735-550 147 736-300 147 750-220 146 750-250 146 750-251 146 750-252 146 75-200 160 75-201 160 75-202 160 75-203 160 75-204 160 75-300 160 75-301 160 75-302 160 770-240 147 74-HSL 15 74-HSR 15 77-HSR 15 78-HSL 15 78-HSR 15 7-HSL 15 7-HSR 15 781-280 153 782-280 153 783-280 153 784-280 153 786-250 153 787-250 153 78-530 153 831-200 147 831-250 147 831-315 147 60-300 146 70-100 146 70-200 146 70-310 146 70-312 146 70-320 146 70-313 146 71-240 157 71-241 157 71-242 157 72-260 157 72-261 157 73-240 157 73-241 157 74-260 157 74-261 157 76-250 15 76-275 15 76-300 15 77-300 15 78-250 15 78-251 15 78-275 15 78-276 15 78-300 15 78-301 15 7-260 15 7-261 15 7-280 15 7-281 15 80-24 15 80-250 15 80-275 15 80-300 15 81-300 15 82-250 15 82-251 15 82-275 15 82-276 15 82-300 15 82-301 15 83-260 15 83-261 15 83-280 15 83-281 15 84-250 15 85-200 15 85-250 15 86-180 160 86-181 160 87-180 160 87-181 160 88-180 160 88-181 160 0-140 163 1-125 163 1-160 160 1-200 160 1-210 160 3-140 162 3-10 162 3-11 162 4-200 163 4-250 163 5-200 162 5-250 162 6-180 163 6-210 163 85-300 15-000 155-003 155-100 155-200 155 165
Our associate, Wilhelm Bäcker GmbH & Co. KG, maker of the famous WILBÄR line of special tools for Deutz and other diesel engines, motor manipulators, engine and transmission jacks, in-ground lifts, practice-proven FEGU machine-element washing installations, tractor assembly equipment, wheel lifters and sundry other tools and appliances for the agricultural machine industry, will be happy to send you a currently valid catalogue on request. Wilhelm Bäcker GmbH & Co. KG Phone: +4 (0) 21 1-8 82-860 P.O.Box 14 05 80 Telefax: +4 (0) 21 1-8 82-87 D-42826 Remscheid e-mail: info@wilbaer.de Ask also for this catalogue of special-purpose tools for rolling bearings, including fitting and pulling tools for hydraulic and mechanical bearings, inductive heaters, lubricants and working substances, plus all the familiar, time-tested models comprising the trusty TIRAX line of push/pull devices. Phone: +4 (0) 21 1-88-282 Telefax: +4 (0) 21 1-88-20 e-mail: tirax@kukko.com Your specialist for screwdrivers and spanners Phone: +4 (0) 21 1-88 56-0 Telefax: +4 (0) 21 1-88 56-40 e-mail: info@carolus.de 0101-D/20.000