Metal Hand-Held Linear Battery Charger/Starter Manual Operation Rugged Durable Metal Case Top Mounted Carrying Handle Model SE-1052 50-Amp Engine Start for emergency starting 10-Amp Fast Charge charges a battery in 3 to 5 hours 2-Amp Trickle Charge charges a small 12 volt battery in 2 to 12 hours Model SE-1250 50-Amp Engine Start for emergency starting 30-Amp Boost for quick charges 10-Amp Fast Charge charges a battery in 3 to 5 hours
Metal Hand-Held Linear Battery Charger/Starter Fully Automatic 2 LEDs Rugged Durable Metal Case Top Mounted Carrying Handle Model SE-5212A 50-Amp Engine Start for emergency starting 10-Amp Fast Charge charges a battery in 3 to 5 hours 2-Amp Trickle Charge charges a small 12 volt battery in 2 to 12 hours Model SE-1275A 75-Amp Engine Start for emergency starting 12-Amp Fast Charge charges a battery in 2 to 5 hours 2-Amp Trickle Charge charges a small 12 volt battery in 2 to 12 hours Model SE-1510MA 100-Amp Engine Start for emergency starting 15-Amp Fast Charge charges a battery in 2 to 4 hours 2-Amp Trickle Charge charges a small 12 volt battery in 2 to 12 hours
Linear Wheel Charger/Starter Manual Operation Rugged Durable Metal Case Model SE-2352 200-Amp Engine Start for emergency starting 35-Amp Rapid Charge charges in 1 to 3 hours 2-Amp Trickle Charge charges a small 12V battery in 2 to 12 hours Model SE-4020 200-Amp 12-Volt/100-Amp 6-Volt engine start for emergency starting 40-Amp Rapid Charge charges in 1 to 3 hours 10-Amp Fast Charge for everyday charging needs. Charges in 3 to 5 hours 1-Amp 12-Volt Slow/Trickle Charge Rate for small batteries Model SE-6030 300-Amp 12-Volt/200-Amp 6-Volt Engine Start for emergency starting 60-Amp Rapid Charge charges a battery in 1/2 to 2 hours 30-Amp Charge for very fast charging. Charges in 1 to 3 hours
Heavy-Duty Linear Wheel Charger/Starter 200-Amp 12 or 24-Volt/180-Amp 6-Volt Engine Start for emergency starting under severe conditions 80-Amp Rate 6V battery systems 60-Amp Rate 12V battery systems 44-Amp Rate 18V battery systems 30-Amp Rate 24V battery systems Manual Operation Single Rotary Switch for ALL volt ranges Rugged Durable Metal Case Model SE-3000
Schumacher Digital Battery Tester Model BT-50 Reads Voltages from 4.99 up to 19.99 Watts Reverse-Hookup Protection Over Voltage Protection Checks Charging System & Battery Voltages Four Character Lighted Digital Display OCV Table on Front of Tester High-Tech Look & Style Model SEC-100 CCA Range 200-1200 Operating voltage range 8 to 16V An easy-to-read digital display & user prompts to ensure simple & accurate operation Research based diagnostic algorithm provides accurate assessment of the battery & recommended action to the user Model BT-250 Microprocessor Controlled makes for an easy and accurate load test with no more need to time load tests Checks both Battery and Charging System Bright, 3-color, LED Display indicates both voltage and test results 6-Step Design indicates Pass, Pass & Recharge, Recharge & Retest, Fail and 1 LED indicates Check Clamp Super-Grip Battery Clamps heavy-duty and color-coded
Schumacher Battery Load Tester 100-Amp Load Test for 6V batteries 50-Amp Load Test for 12V batteries Tests 6V & 12V batteries up to 1,000 CCA Top Mounted Rocker Switch for easier operation Super-Grip Battery Clamps heavy-duty and color-coded Easy-To-Read Meter accurate and shock resistant Baked Enamel, Steel Case ventilated to keep cool Rubber Insulated Carrying Handle for comfort and safety Model BT-100
DSR Pro-Series Battery/Charging System Analyzer 200 Amp Digital Battery Load Tester Microprocessor Control makes for an easy and accurate load test with no need to time yourself Bright, LED Digital Display indicates both voltage and test results Unique 3-Step Design LED polarity check function, battery load test and charging system test readout Automatically Turns Off the Load after 10 seconds and locks the voltage Super-Grip Battery Clamps heavy-duty and color-coded Baked Enamel, Steel Case ventilated to keep cool Rubber Insulated Carrying Handle for comfort and safety Checks both Battery and Charging System Model PST-200
DSR Pro-Series Carbon Pile Battery/Charging System/Starter Analyzer 500-Amp Variable Load Carbon Pile Tester for 12V batteries, alternators, regulators and starters Separate Voltmeter and Ammeter provides easy-to-monitor battery load tests Color-Coded, Temperature Compensation Pass/Fail Bands on Voltmeter insures precise battery load test results Tests batteries up to 1,000 CCA Super-Grip Battery Clamps fully insulated, heavy-duty and color-coded with wire leads Baked Enamel, Steel Case ventilated to keep cool Built-in Warning Beepers informs you instantly of any problems Model PST-500
PST-900X Tester 100A Load Test 6V, 12V, 24V Operation Operating Range: 40-2000CCA Rates: CCA, SAE, DIN, EN, IEC, JIS Built-In Printer Replaceable Leads Warranty/Bar Code Generator 3 Testers in 1 - Battery - Charging - Starting Safe Rubber Molded Case, Reverse Polarity
12V Accessories AC to DC Power Converter Converts 120 volt AC household power to 6-Amp 12 volt DC power. Use for 12V travel coolers, 12V lights and other accessories. Model PC-6
12-Volt Accessories Work Light Model SAC-505 Model SAC-519 Model SAC-503 Model SAC-514 Plugs into a 12-Volt power receptacle On/Off switch Flexible neck allows light to be aimed where needed Dimensions width 4-3/4, depth 1-5/8, height 9-3/4 Convenient 23-inch long flexible neck Plugs into a 12-Volt power receptacle to provide portable light anytime On/Off switch Dimensions width 4-7/8, depth 1-3/4, height 14-3/4 Magnetic strip holds to metal surface Pistol grip with convenient On/Off switch 5-foot cord with Power Source Plug Adapter Hardened plastic construction for durability Bright halogen beam illumination for best visibility Dimensions width 6-3/4, depth 3-3/8, height 11-1/2 15 Watt Light 12-foot cord with 12-Volt DC plug and battery clip Plugs into 12-Volt power receptacle 12-foot cord allows maneuverability Extra bright light Includes hook and stand Dimensions width 4-1/4, depth 1-7/8, height 25-3/4
DSR Pro-Series Electronic Battery Bus Bar for Parallel Charging Charges multiple battery systems at the same time when hooked up to a battery charger Enables simultaneous recharging of up to 6 batteries Built-in test circuit and LED verify proper connection and polarity Heavy-Duty, 10-Gauge battery cables are 5- feet long and will carry up to 30 amps. Color-coded and insulated clamps Insulated backboard allows unused clamps to be safely stored Threaded, side-terminal adapters provided for convenient hook-up Wall mounting hardware included Model PSB-6
Instant Portable Power Source 950 Peak Amps 12 Volt Accessory Port - with overload & short circuit protection Power Inverter On/Off Switch 400 Watt built-in inverter operates 2-120 volt (household current) appliances Heavy-Duty Cables #6 gauge, 23 long cables stay flexible in cold temperatures Easy-to-Read Battery Status LEDs tell when 18AH internal battery is at Full Power, 75% Charged or <50% charged Charging and Charged Light indicates status of internal battery when charging 12 Volt Flex Light Included Model IP-1800I