TRACTOR: LOADER-BACKHOE

Price quote for: TRACTOR: LOADER-BACKHOE Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: RDO Equipment Company / Nortrax Jesse Miller 12500 Dupont Avenue South Burnsville, MN, 55337 952.882.2752 800.950.3298 952.890.7046 jmiller@rdoequipment.com Version of Excel used: 2010 Spec # Information Requested Answer 1.0 Make & Model John Deere 410K TMC Price for base unit 107,592 Tier 3, 3i, or 4? Engine HP gross/net (SAE) Aspiration Transmission, type and number of forward and reverse gears EPA Interim Tier 4/EU Stage IIIB 79 kw (106 hp) at 2,000 rpm turbocharged 5 speed, helical-cut gears, full PowerShiftTM transmission with hydraulic reverser standard; electric clutch cutoff on loader lever / Forward: 5 / Reverse: 3 Hydraulic pump (GPM and PSI) GPM for backhoe GPM for loader Brakes Steering Drive Axles 42 gpm / 3,625 psi 24 993 kpa (3,625 psi) 24 993 kpa (3,625 psi) Service: Power assisted, hydraulic wet disc, mounted inboard, self-adjusting and self-equalizing / Parking: Spring applied, hydraulically released, wet, multi-disc, independent of service brakes with electric switch control Hydrostatic power steering and emergency steering Front: Automatic, limited-slip traction control / Rear: Foot actuated, hydraulically engaged 100% mechanical lock Front tires, size and type Rear tires, size and type Firestone 12.5/80-18 12PR Traction Front Sure Grip Lug Tires Firestone 21L - 24 12PR (R4) Tubeless Rear

Backhoe digging depth (SAE) (Standard stick) Backhoe digging depth 2' flat bottom (SS) Backhoe reach from swing pivot at ground line (SS) Backhoe loading height (SS) Backhoe loading reach (SS) Backhoe digging depth (SAE) (Retracted extendable stick) Backhoe digging depth (SAE) (Extended extendable stick) Backhoe digging depth 2' flat bottom (RES) Backhoe digging depth 2' flat bottom (EES) Backhoe reach from swing pivot at ground line (RES) Backhoe reach from swing pivot at ground line (EES) Backhoe loading height (RES) Backhoe loading height (EES) Backhoe loading reach (RES) Backhoe loading reach (EES) Loader capacity (SAE) standard bucket Loader standard bucket width Loader maximum operating height Loader lift capacity at maximum height Loader breakout force Loader maximum hinge pin height Loader dump reach at maximum height Loader maximum bucket roll back at ground level Loader digging depth, with bucket flat Lights, front/rear 4.83 m (15 ft. 10 in.) (15 ft. 8 in.) (19 ft. 8 in.) 3.81 m (12 ft. 6 in.) 12 ft plus (16 ft. 1 in.) (20 ft. 0 in.) (15 ft. 11 in.) (19 ft. 11 in.) (19 ft. 11 in.) (23 ft. 8 in.) (12 ft. 8 in.) (15 ft. 6 in.) 12 ft plus ~ 16ft (1.50 cu. yd.) (94 in.) (11 ft. 0 in.) (6,815 lb.) (10,640 lb.) (11 ft. 0 in.) (11 ft. 0 in.) 40 deg. (5.5 in.) 10 halogen: 4 front, 4 rear, and 2 side docking (32,500 candlepower each); turn signals and fashers: 2 front and 2 rear; stop and taillights; and 2 rear refectors

Gauges Monitor system with audible and visual warnings: Engine air restriction / Low alternator voltage / Engine oil pressure / Hydraulic Ɵlter restriction / Parking brake on/off / Seat belt / Machine diagnostic information via 4-push-button/LCD operator interface / Aftertreatment device temperature / Transmission oil temperature / Fuel / Hour meter Warranty Term (months, years) 1 Year

Price quote for: TRACTOR: LOADER-BACKHOE VENDOR NAME RDO Equipment / Nortrax MAKE AND MODEL John Deere 410K TMC Spec # Description Price 1.0 Price for base unit: 107,592 Base unit price consists of the items listed below: 1700 JDLink Ultimate Cellular for the Americas, excluding Costa Rica Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematics gateway (MTG), and JDLink Ultimate activation. s for appropriate ordering codes. 2085 Ultimate Cab with Dual Doors and Air Conditioning Tinted safety glass Deluxe interior trim Headliner Molded floor mats 26,000 BTU air conditioning (recommend ordering either H.D. bumper or counterweights) CFC free R134a refrigerant Sun Visor 2401 English Decals with English Operator and Safety Manuals Includes English decals installed and English language operator's manual and parts book 02W0T 410K TMC BACKHOE LOADER AT186288 Slow Moving Vehicle Emblem OMT281951 OP MANUAL PC11119 PARTS BOOK TM12487 TECH MANUAL 8675 Dual Batteries, 300 Minute Reserve Capacity (1900 CCA) Recommended for temperatures below 32 degrees F (0 degrees C) 3085 Mechanical Front Wheel Drive (MFWD) with Limited Slip Differential and 5F/3R Powershift Transmission RDO Parts Engine Coolant Heater 4891 Firestone 21L - 24 12PR (R4) Tubeless Rear and 12.5/80-18 12PR Traction Front Sure Grip Lug Tires 92 Inches (2.33 M) overall width Rear tire chains require wheel spacers.

7085 Toolcarrier Loader, 3-Function Hydraulics with Coupler/Auxiliary Plumbing PARALLEL Lift TMC Loader Includes boom height kick out and return to carry 5095 Extendible Dipperstick, Seven-Function with Auxiliary Hydraulics and Thumb Mounting Ears Seven-function hydraulics Includes 6th Function with left foot pedal for cylinderactuated attachments less plumbing 1000-3000 PSI adjustable 5400 Less Coupler 5600 Less Backhoe Bucket with Bucket Pins 7605 Less Coupler Bucket 8415 Heavy-Duty Bumper Recommended for: Standard Backhoe w/o Aux. Hyd. Extendible Backhoe w/ Multipurpose Bucket AT101565 AIR FILTER AT179323 OIL FILTER AT184590 AIR FILTER AT191102 AIR FILTER AT308274 FILTER AT332908 FILTER ELEMENT AT332909 FILTER ELEMENT H216169 BREATHER RE504836 OIL FILTER RE522878 FILTER ELEMENT RE541922 Filter Element 2.0 OPERATOR ENVIRONMENT Use this section to offer operator environment options. Number items starting with 2.1, 2.2, etc. Use as many numbers as you need. 2.01 1700 JDLink Ultimate Cellular for the Americas, excluding Costa Rica Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematics gateway (MTG), and JDLink Ultimate activation. s for appropriate ordering codes. 2.02 1701 JDLink Ultimate Satellite for the Americas, excluding Costa Rica Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematics gateway (MTG), and JDLink Ultimate activation. for appropriate ordering codes. State Base 1,024

2.03 2025 Canopy with Floor Mat and Headliner (ROPS)/(FOPS) Isolation mounted Modular design ROPS/FOPS Level 2 (meets ISO 3449 & ISO 3471 / SAE J1040) Molded roof Molded floor mat Tilt Steering Wheel 3 In. Retractable Seat Belt stop/tail lights - 2 front and rear 2.04 2085 Ultimate Cab with Dual Doors and Air Conditioning Tinted safety glass Deluxe interior trim Headliner Molded floor mats 26,000 BTU air conditioning (recommend ordering either H.D. bumper or counterweights) CFC free R134a refrigerant Sun Visor 2.05 2401 English Decals with English Operator and Safety Manuals Includes English decals installed and English language operator's manual and parts book 2.06 2403 English Decals with Spanish Decals and Manuals Seperate Includes English decals installed with Spanish decal packet and English language operator's manual and parts book (13,585) State Base State Base In Base Price 2.07 2404 English Decals with French Decals and Manuals In Base Price Seperate Includes English decals installed and French decal packet and English language operator's manual and parts book 2.08 9210 Left Side Console Storage with Cup Holders 44 2.09 9505 Full MFWD Guard 236 2.1 02W0T 410K TMC BACKHOE LOADER State Base 2.11 AT186155 (2) External Rear View Mirrors 446 2.12 AT186288 Slow Moving Vehicle Emblem State Base 2.13 AT186307 Sun Visor 190 2.14 AT187707 License Plate Bracket and Light 275 2.15 AT192032 Operator Manual Tether Cables for ROPS or Cab 2.16 AT326271 AM/FM/WB/CD Stereo with Digital Clock for Cab Requires Code 2075 or 2085, Cab. 2.17 AT348557 AM / FM / WB Radio Requires Code 2075 or 2085, Cab. 2.18 AT407078 Washer Kit, Windshield K-Series backhoes except the 310K and 310K EP must order applicable Software Part Number in JDPoint for Field Kit to function properly. 81 1,683 1,515 703

2.19 AT408903 Mounting kit for multi-purpose (ABC) Dry 320 Chemical Fire Extinguisher Kit Does not Include Fire Extinguisher. 2.2 AT416297 Storage Console 354 2.21 OMT281951 OP MANUAL State Base 2.22 PC11119 PARTS BOOK State Base 2.23 TM12487 TECH MANUAL State Base 3.0 ELECTRICAL Use this section to offer electrical options. Number items starting with 3.1, 3.2, etc. Use as many numbers as you need. 3.01 8675 Dual Batteries, 300 Minute Reserve Capacity (1900 CCA) Recommended for temperatures below 32 degrees F (0 degrees C) State Base 3.02 AT313583 Strobe Light Kit 487 Magnet mounted. 3.03 AT313589 Beacon/Strobe Ready Wiring Kit 278 Kit for aftermarket Beacon or Strobe light Kit does not include Beacon 3.04 AT313592 Rotating Beacon Kit 429 3.05 AT411249 Jump Start Booster Kit 597 4.0 POWERTRAIN Use this section to offer powertrain options. Number items starting with 4.1, 4.2, etc. Use as many numbers as you need. 4.01 3085 Mechanical Front Wheel Drive (MFWD) with State Base Limited Slip Differential and 5F/3R Powershift Transmission 4.02 9045 Chrome Exhaust Extension 98 4.03 9941 AutoShift - Automatic Transmission 2,065 4.04 AT325678 Full MFWD Driveshaft Guard 538 4.05 AT338274 Guard, Transmission Bottom "J" Model 1,325 Not for use with Low Noise Package or MFWD driveshaft guard. 4.06 AT375684 Fluid Sampling Ports 812 Not for use on Stage II (Tier 2) engines. May be used on Stage IIIa (Tier 3) engines. 4.07 AT393180 Environmental Drain Kit 898 4.08 AT419494 Engine Air Intake Pre-Cleaner 538 4.081 RDO Parts Engine Coolant Heater State Base 5.0 AXLES & TIRE OPTIONS Use this section to offer axle and tire options. Number items starting with 5.1, 5.2, etc. Use as many numbers as you need.

5.01 4780 Goodyear 19.5L - 24 In. 10 PR (R4) Tubeless Rear and 12.5/80-18 In. 14 PR Traction Front Sure Grip Lug Tires 86 in. (2.18 m) overall width. Rear tire chains require wheel spacers. 5.02 4782 Michelin 500/70 R24 XMCL Radial Rear Tubeless Tires With 340/80 R18 XMCL Radial Front Tires 85 in. (2.16 m) overall width. Rear tire chains require wheel spacers. (1,302) 968 5.03 4890 Goodyear 21L - 24 In. 10 PR (R4) Tubeless Rear No Charge and 12.5/80-18 In. 14 PR Traction Front Sure Grip Lug Tires 91 in. (2.32 m) overall width. Rear tire chains require wheel spacers. 5.04 4891 Firestone 21L - 24 12PR (R4) Tubeless Rear and State Base 12.5/80-18 12PR Traction Front Sure Grip Lug Tires 92 Inches (2.33 M) overall width Rear tire chains require wheel spacers. 5.05 AT347522 Rear Wheel Spacers for Rear Tire Chains 1,028 5.06 AT371257 MFWD Wheel Fender Kit for 18 in. tires only Requires MFWD and 12.5/80-18 or 340/80R-18 front tires. 855 6.0 HYDRAULICS Use this section to offer hydraulic options. Number items starting with 6.1, 6.2, etc. Use as many numbers as you need. 6.01 7085 Toolcarrier Loader, 3-Function Hydraulics with Coupler/Auxiliary Plumbing PARALLEL Lift TMC Loader Includes boom height kick out and return to carry 6.02 AT310083 TMC Backhoe/Loader Auxiliary Function kit "Can also be used for Backhoe or loader aux. hyd. function". When used as a backhoe auxiliary section on machines below S/N 173486, also requires ordering a LH joystick with Aux Roller from service parts. 6.03 AT329140 Auxiliary Hydraulic Plumbing for Thumb, Clamp, Swinger or Jaw Bucket K-Series backhoes must order applicable Software Part Number in JDPoint for Field Kit to function properly. For low flow applications Average installation, 2 hours. nd (2) 19M8976 State Base 2,886 640

6.04 AT339687 Backhoe EH Auxiliary Controls / Auxiliary Select Flow Control Valve (Adjustable in 1 GPM increments, 5-35 GPM) and Auxiliary Plumbing K-Series backhoes must order applicable Software Part Number in JDPoint for Field Kit to function properly. dipperstick. 6.05 AT348718 3rd Function Lines kit Loader plunbing can be used for Loader Functions. 6.06 AT358432 Hydraulic 2-Tine Thumb Kit Recommended for use with 18 & 30 in. Backhoe Buckets. Requires plumbing kit. 6.07 AT358433 Hydraulic 4-Tine Thumb Kit Recommended for use with 24 in. Backhoe Buckets. Requires Plumbing Kit. 2,094 1,139 3,699 3,699

7.0 BACKHOE OPTIONS Use this section to offer backhoe options. Number items starting with 7.1, 7.2, etc. Use as many numbers as you need. 7.01 5095 Extendible Dipperstick, Seven-Function with State Base Auxiliary Hydraulics and Thumb Mounting Ears Seven-function hydraulics Includes 6th Function with left foot pedal for cylinderactuated attachments less plumbing 1000-3000 PSI adjustable 7.02 5400 Less Coupler State Base 7.03 5410 DEERE Standard Quick Coupler For use with 310SE, SG, SJ, SK, 410E, G,J, K backhoe buckets. Not compatible with 310E, G, J, K Series Backhoe Buckets. 7.04 5420 Multi-Brand Quick Coupler For use with DEERE C, D, SE, SG, SJ, SK Series buckets and with Case K-L-M and CAT C Series Buckets. Not for use with 710 Buckets. 7.05 5430 Top Hook Quick Coupler For use with DEERE Top Hook Coupler bucket codes 5630 or 5660 and CP or Pre-XLS Wain Roy Top Hook Buckets 7.06 5440 New Series Multi-Brand Quick Coupler For use with CAT D and E, Case K-L-M, and DEERE SE, SG, SJ and SK Series backhoe buckets except high-capacity buckets and 710 buckets. 7.07 5450 Universal Coupler - Pin-grabber style coupler 1,190 For use with DEERE C-D-SE-SG-SJ & SK Series buckets and with Case K-L-M and CAT C,D & E Series Buckets. Not for High Capacity Buckets and 710 Buckets. UNIVERSAL COUPLER will not work with most thumbs. 7.08 5600 Less Backhoe Bucket with Bucket Pins State Base 7.09 5616 12" (305 mm) Wide, Heavy-Duty, 3.3 Cu. Ft. (.09 Cu. M.) Capacity Bucket 7.1 5626 18" (457 mm) Wide, Heavy-Duty, 5.1 Cu. Ft. (0.14 Cu. M.) Capacity Bucket 7.11 5630 Top Hook 18" (457 mm) Wide, Heavy-Duty, 5.1 Cu. Ft. (0.14 Cu. M.) Capacity Coupler Bucket Requires Code 5430 Top Hook Coupler 7.12 5656 24" (610 mm) Wide, Heavy-Duty, 7.5 Cu. Ft. (0.21 Cu. M.) Capacity Bucket 7.13 5658 24" (610 mm) Wide, Severe-Duty, 7.5 Cu. Ft.(0.21 Cu. M.) Capacity Bucket w/ TK Teeth 7.14 5660 Top Hook 24" (610 mm) Wide, Heavy-Duty, 8.8 Cu. Ft. (0.25 Cu. M.) Capacity Coupler Bucket Requires Code 5430 Top Hook Coupler 7.15 5676 24" (610 mm) Wide, Heavy-Duty, 8.8 Cu. Ft. (0.25 Cu. M.) Capacity Bucket 698 793 636 818 627 728 711 741 993 985 1,003

7.16 5678 24" (610 mm) Wide, Severe-Duty, 8.8 Cu. Ft. (0.25 Cu. M.) Capacity Bucket w/ TK Teeth 7.17 5686 30" (762 mm) Wide, Heavy-Duty, 10 Cu. Ft. (0.28 Cu. M.) Capacity Bucket 7.18 9025 Hydraulic 4-Tine (Extendible Dipperstick) Backhoe Thumb Requires backhoe bucket code 5656 or 5658. Not for use with Codes 5430, 5450 7.19 AT192011 BKH Pin-on Bucket 12 In. (305 mm) Heavy- Duty 3.3 Cu. Ft. (0.09 Cu. M.) 7.2 AT192012 BKH Pin-on Bucket 18 In. (457 mm) Heavy- Duty 5.1 Cu. Ft. (0.14 Cu. M.) 7.21 AT192014 BKH Pin-On Bucket 24 In. (610 mm) Standard-Duty 7.5 Cu. Ft. (0.21 Cu. M.) 7.22 AT192015 BKH Pin-On Bucket 24 In. (610 mm) Heavy Duty 7.5 Cu. Ft. (0.21 Cu. M.) 7.23 AT192016 BKH Pin-on Bucket 24 In. (610 mm) Severe Duty 7.5 Cu. Ft. (0.21 Cu. M.) 7.24 AT192017 BKH Pin-on Bucket 24 In. (610 mm) Heavy- Duty 8.8 Cu. Ft. (0.25 Cu. M.) 7.25 AT192018 BKH Pin-on Bucket 24 In. (610 mm) Severe- Duty 8.8 Cu. Ft. (0.25 Cu. M.) 7.26 AT192019 BKH Pin-on Bucket 30 In. (762 mm) Heavy- Duty 10.0 Cu. Ft. (0.28 Cu. M.) 7.27 AT192020 BKH Pin-on Bucket 30 In. (762 mm) Severe- Duty 10.0 Cu. Ft. (0.28 Cu. M.) 7.28 AT192021 BKH Pin-on Bucket 36 In. (914 mm) Heavy- Duty; 12.5 Cu. Ft. (0.35 Cu. M.) 7.29 AT192022 BKH Pin-on Bucket 36 In. (914 mm) Ditching; 12.5 Cu. Ft. (0.35 Cu. M.) 7.3 AT316706 BKH Top Hook Coupler Bucket 24 in. (610 mm) Heavy Duty 7.5 Cu. Ft. (0.21 Cu. M.) 7.31 AT323580 Backhoe Boom Bolt-On Protection Plate Installation instructions T207899, Average installation 1.5 hours. Bolt on or weld to underside of backhoe boom. Recommended for rental, lease, thumbs/clamps, 7.32 AT324292 Coupler, Top Hook Backhoe Bucket Fits on 410G, 410J, 410TJ, 310SG, 310SJ, 310TJ Backhoes. For use with Top Hook backhoe bucket from Deere, CP, and Pre-XLS Wain Roy Recommend Backhoe Boom Bolt-on Protection Plate.. See Counterweight Selection Chart. 7.33 AT324447 BKH Top Hook Coupler Bucket 18 in. (457 mm) Heavy Duty - 5.1 Cu. Ft. (0.14 Cu. M.) 7.34 AT324448 BKH Top Hook Coupler Bucket 12 in. (305 mm) Heavy Duty 3.3 Cu. Ft. (.09 Cu. M.) 7.35 AT335984 Extendible Dipperstick Bolt-on Protection Plate Bolts to bottom of dipperstick. Average installation, 2 hours. 1,130 935 3,631 873 983 1,084 1,125 1,295 1,303 1,406 1,378 1,464 1,373 1,200 1,130 962 908 988 877 743

7.36 AT336315 Coupler, Multi-Brand Universal Backhoe Bucket For use with CAT B & C Series, Case K-L-M and DEERE SE,SG & SJ Series backhoe buckets except High Capacity Buckets and 710 Buckets. Proper counterweighting is required. See Counterweight Selection Chart. 7.37 AT336316 Coupler, Deere Backhoe Bucket Fits 310SE, 310SG, 310SJ, 410E, 410G, 410J,410TJ backhoes. For use with 310SE, 310SG, 310SJ, 410E, 410G, 410J, 410TJ backhoe buckets Proper counterweighing is required. See Counterweight Selection Chart. er. 7.38 AT343629 Coupler, Universal - Pin-grabber style Fits John Deere 310SE, 310SG, 310SJ, 310TJ, 410E, 410G, 410J, 410TJ backhoes For use with DEERE C-D-E-G-J Series buckets and with Case K-L-M and CAT C-D-E Series Buckets. 7.39 AT352853 Pins and Bushings for 310SG/SJ/SK, 315K, 325K, 410G/J/K, K Series TMC Backhoes Less Backhoe Coupler, or with Deere Standard or Multi- Brand Coupler Required for use in addition to code 9804 Interface Adapter or AT371338 Interface Adapter. 7.4 AT393558 Backhoe New Series Multi-Brand Quick Coupler For use with DEERE C-D-SE-SG-SJ-SK Series buckets and with Case K-L-M and Cat D and E Series Buckets Buckets, High Capacity Buckets and 710J Buckets. 1,258 1,142 2,661 445 1,172 7.41 AT422764 Pin-on Bucket w/ TK Teeth, 18 In. (457 mm) 1,249 Severe-Duty 5.1 Cu. Ft. (0.14 Cu. M.) 7.42 AT422767 Pin-on Bucket w/ TK Teeth, 24 In. (610 mm) 1,347 Severe-Duty 7.5 Cu. Ft. (0.21 Cu. M.) 7.43 AT422769 Pin-on Bucket w/ TK Teeth, 24 In. (610 mm) 1,511 Severe-Duty 8.8 Cu. Ft. (0.25 Cu. M.) 7.44 AT422770 Pin-on Bucket w/ TK Teeth, 30 In. (762 mm) 1,568 Severe-Duty 10.0 Cu. Ft. (0.28 Cu. M.) 7.45 MOUNTING ADAPTER MOUNTING ADAPTER 1,491 7.46 RHB 310-6 RHB 310-6 hydraulic breaker - includes 2 chisels, hoses, charge kit & tool box 7.47 RHP 20V RHP 20V hydraulic compactor - includes hoses, tool box 8.0 FRONT LOADER OPTIONS Use this section to offer front loader options. Number items starting with 8.1, 8.2, etc. Use as many numbers as you need. 18,283 6,169

8.01 7605 Less Coupler Bucket State Base 8.02 7660 1.5 Cu. Yd. (1.15 Cu. M.), 92 in. (2.34 m.) wide Heavy Duty Long Lip Coupler Bucket with Bolt-On Cutting Edges and Skid Plates 2,162 8.03 7690 1.32 Cu. Yd.(1.0 Cu. M.), 92 in.(234 mm) wide Multipurpose Coupler Bucket Requires Code 7085, Aux. Loader Coupler Hydraulics Cannot be used with code 8485 or 8495 Counterweight. Includes reversible bolt-on cutting edge and skid plates. st thumbs. 8.04 AT308076 LDR Pin-on Bucket 1.25 Cu. Yd. (.96 Cu. M.) Heavy Duty 86 in. (2.18 m) Long Lip and Skid Plates 8.05 AT308080 LDR Pin-On Bucket 1.32 Cu. Yd. (1.0 Cu. M.) Heavy Duty Long Lip Bucket 92 in. (2.34 m) wide. Includes reversible bolt-on cutting edge with skid plates. * Includes two lift holes. 8.06 AT308082 LDR Pin-on Bucket 1.5 Cu. Yd. (1.15 Cu. M.) Heavy Duty Long Lip 92 in. (2.34 m) wide. Includes reversible bolt-on cutting edge with skid plates. Includes two lift loops. 8.07 AT308138 Forks, Pallet (2) 48 in.(1.22m) with 60 in. (1.52m) Coupler Fork Carriage 8.08 AT308139 Forks, Pallet (2)60 in.(1.52m) with 60 in. (1.52m) Coupler Fork Carriage 8.09 AT308193 LDR Pin-on Multi-Purpose Bucket 1.32 Cu. Yd. (1.0 Cu. M.), 92 in. (2.34 m) wide with Reversible Bolt On Cutting Edges and Skid Plates Requires Code 7075, or Third Function Loader Hydraulics. 92 in. (2.3 m) bucket width Pre-drilled for eight teeth. 8.1 AT308965 LDR Coupler Bucket 1.5 Cu. Yd. (1.15 Cu. M.) Heavy Duty Long Lip Requires Hydraulic Front Coupler. 92 in. (2.34 m.) wide. Includes reversible bolt-on cutting edge and skid plates. Includes two lift holes 8.11 AT308966 LDR Coupler Bucket 1.32 cu. yd. (1.0 cu. m) Heavy Duty 92 in. (2.34 m) Long Lip with Reversible Bolt On Cutting Edge and Skid Plates 4,181 2,062 2,300 2,547 2,490 2,606 4,630 2,695 2,537

8.12 AT308968 LDR Coupler Bucket 1.25 Cu. Yd. (.96 Cu. M.) Heavy Duty 86 in. (2.18 m) wide Long Lip without Bolt-On Cutting Edges or Skid Plates 8.13 AT363772 LDR Coupler Multi-Purpose Bucket 1.32 cu. yd. (1.0 cu. m) 92 in. (2.34 m) with Reversible Bolt On Cutting Edges and Skid Plates Pre-drilled for eight teeth. Includes two built-in lift loops. Proper counterweighting is required. 2,081 4,916 9.0 PERFORMANCE OPTIONS Use this section to offer performance options. Number items starting with 9.1, 9.2, etc. Use as many numbers as you need. 9.01 8415 Heavy-Duty Bumper State Base Recommended for: Standard Backhoe w/o Aux. Hyd. Extendible Backhoe w/ Multipurpose Bucket 9.02 8425 450 Lb. (204 kg) Front Counterweight 339 Recommended for: Standard backhoe w/ coupler and 1.3 c.y. loader bucket 9.03 8455 750 Lb. (340 kg) Front Counterweight 550 Recommended for: Standard Backhoe w/ rear attachment and w/o Backhoe Coupler 9.04 8475 1000 Lb. (454 kg) Front Counterweight 758 Recommended for: 9.05 8485 1250 Lb. (567 kg) Front Counterweight 970 Recommended for: Standard Backhoe w/ rear attachment and Coupler Standard Backhoe w/ Aux. Hyd. and w/o Coupler Extendible Backhoe w/ 1.5 c.y. loader bucket and backhoe w/o Coupler POWERTRAIN AND COOLING 9.06 9909 Non-Export Rust Preventive Coating 95 9.07 AT305073 Stabilizer Cylinder Guards (Set of Two) 588 9.08 AT376409 Standard Stabilizer Street Pads 408 9.09 AT376410 Heavy Duty Stabilizer Pads 464 9.1 AT406999 Rubber Bumper for Grill Frame 309 9.11 AT409585 Counterweight, Front, 450 lbs (204 kg) Use with (4) T119912 AND (4) 19M9124. 9.12 AT409586 Counterweight, Front, 750 lbs (340 kg) Use with (4) T119912 AND (4) 19M9124. 9.13 AT409587 Counterweight, Front, 1,000 lbs (454 kg) Use with (4) T119912 AND (4) 19M9124. 9.14 AT409588 Counterweight, Front, 1,250 lbs (567 kg) Use with (4) T119912 AND (4) 19M9124. 616 867 1,076 1,291

9.15 AT409592 Counterweight, Front, 250 lbs (113 kg) 436 If adding to the 450 lb. (204 KG) counterweight, order (4) T151797, (2) 19M9088, AND (2) 14M7587. For 750 lb. (340 KG), 1000 lb. (454 KG) and 1250 lb. (567 KG) counterweights, order (2) T151797 and (2) 19M8976 9.16 AT101565 AIR FILTER State Base 9.17 AT179323 OIL FILTER State Base 9.18 AT184590 AIR FILTER State Base 9.19 AT191102 AIR FILTER State Base 9.2 AT308274 FILTER State Base 9.21 AT332908 FILTER ELEMENT State Base 9.22 AT332909 FILTER ELEMENT State Base 9.23 H216169 BREATHER State Base 9.24 RE504836 OIL FILTER State Base 9.25 RE522878 FILTER ELEMENT State Base 9.26 RE541922 Filter Element State Base 10.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price 11 11.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. 11.1 Hourly Rental Rate: N/A 11.2 Weekly Rental Rate: 1,070 11.3 Monthly Rental Rate: 3,200 11.4Percent (%) of Rental Fee applied to purchase price: 100%

If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, 11.5 state the actual interest rate here: Prime + 3% 12.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS Delivery Starting Point - City, State, Zip code RDO Equipment Co - 12.01 BURNSVILLE 55337 Delivery Starting Point - City, State, Zip code RDO Equipment Co - NORTH 12.02 MANKATO 56003 Delivery Starting Point - City, State, Zip code RDO Equipment Co - 12.03 ROCHESTER 55901 Delivery Starting Point - City, State, Zip code RDO Equipment Co - MARSHALL 12.04 56258 Delivery Starting Point - City, State, Zip code RDO Equipment Co - Sauk Rapids 12.05 56379 Delivery Starting Point - City, State, Zip code RDO Equipment Co - Moorhead 12.06 56560 Delivery Starting Point - City, State, Zip code RDO Equipment Co - Grand Forks 12.07 58203 12.08 Delivery Starting Point - City, State, Zip code Nortrax - Bemidji 56601 12.09 Delivery Starting Point - City, State, Zip code Nortrax - Duluth 55811 12.10 Delivery Starting Point - City, State, Zip code Nortrax - Grand Rapids 55744 12.11 Price per loaded mile 6 13.0 Warranty Details: Months, Years, Hours, etc.: 1 Year - Full Machine 13.0 EXTENDED WARRANTY OPTIONS 13.001 Comprehensive - 1000 Hour 24 Month 1,467 13.002 Comprehensive - 1500 Hour 24 Month 1,544 13.003 Comprehensive - 2000 Hour 24 Month 1,625 13.004 Comprehensive - 2500 Hour 24 Month 1,712 13.005 Comprehensive - 3000 Hour 24 Month 1,801 13.006 Comprehensive - 4000 Hour 24 Month 2,000 13.007 Comprehensive - 5000 Hour 24 Month 2,224 13.008 Comprehensive - 6000 Hour 24 Month 2,826 13.009 Comprehensive - 7000 Hour 24 Month 3,347 13.010 Comprehensive - 7500 Hour 24 Month 4,688 13.011 Comprehensive - 1000 Hour 36 Month 1,840 13.012 Comprehensive - 1500 Hour 36 Month 1,936 13.013 Comprehensive - 2000 Hour 36 Month 2,039 13.014 Comprehensive - 2500 Hour 36 Month 2,146 13.015 Comprehensive - 3000 Hour 36 Month 2,258 13.016 Comprehensive - 4000 Hour 36 Month 2,510 13.017 Comprehensive - 5000 Hour 36 Month 2,788 13.018 Comprehensive - 6000 Hour 36 Month 3,564 13.019 Comprehensive - 7000 Hour 36 Month 4,584 13.020 Comprehensive - 7500 Hour 36 Month 6,389 13.021 Comprehensive - 1000 Hour 48 Month 2,776 13.022 Comprehensive - 1500 Hour 48 Month 2,921 13.023 Comprehensive - 2000 Hour 48 Month 3,075

13.024 Comprehensive - 2500 Hour 48 Month 3,238 13.025 Comprehensive - 3000 Hour 48 Month 3,409 13.026 Comprehensive - 4000 Hour 48 Month 3,785 13.027 Comprehensive - 5000 Hour 48 Month 4,206 13.028 Comprehensive - 6000 Hour 48 Month 5,300 13.029 Comprehensive - 7000 Hour 48 Month 6,279 13.030 Comprehensive - 7500 Hour 48 Month 8,004 13.031 Comprehensive - 1000 Hour 60 Month 3,712 13.032 Comprehensive - 1500 Hour 60 Month 3,907 13.033 Comprehensive - 2000 Hour 60 Month 4,112 13.034 Comprehensive - 2500 Hour 60 Month 4,328 13.035 Comprehensive - 3000 Hour 60 Month 4,557 13.036 Comprehensive - 4000 Hour 60 Month 5,061 13.037 Comprehensive - 5000 Hour 60 Month 5,624 13.038 Comprehensive - 6000 Hour 60 Month 7,123 13.039 Comprehensive - 7000 Hour 60 Month 8,600 13.040 Comprehensive - 7500 Hour 60 Month 9,619 13.041 Power Train And Hydraulics - 1000 Hour 24 Month 880 13.042 Power Train And Hydraulics - 1500 Hour 24 Month 927 13.043 Power Train And Hydraulics - 2000 Hour 24 Month 974 13.044 Power Train And Hydraulics - 2500 Hour 24 Month 1,028 13.045 Power Train And Hydraulics - 3000 Hour 24 Month 1,081 13.046 Power Train And Hydraulics - 4000 Hour 24 Month 1,201 13.047 Power Train And Hydraulics - 5000 Hour 24 Month 1,335 13.048 Power Train And Hydraulics - 6000 Hour 24 Month 1,696 13.049 Power Train And Hydraulics - 7000 Hour 24 Month 2,008 13.050 Power Train And Hydraulics - 7500 Hour 24 Month 2,813 13.051 Power Train And Hydraulics - 1000 Hour 36 Month 1,001 13.052 Power Train And Hydraulics - 1500 Hour 36 Month 1,053 13.053 Power Train And Hydraulics - 2000 Hour 36 Month 1,109 13.054 Power Train And Hydraulics - 2500 Hour 36 Month 1,168 13.055 Power Train And Hydraulics - 3000 Hour 36 Month 1,229 13.056 Power Train And Hydraulics - 4000 Hour 36 Month 1,363 13.057 Power Train And Hydraulics - 5000 Hour 36 Month 1,516 13.058 Power Train And Hydraulics - 6000 Hour 36 Month 2,015 13.059 Power Train And Hydraulics - 7000 Hour 36 Month 2,809 13.060 Power Train And Hydraulics - 7500 Hour 36 Month 3,913 13.061 Power Train And Hydraulics - 1000 Hour 48 Month 1,614 13.062 Power Train And Hydraulics - 1500 Hour 48 Month 1,698 13.063 Power Train And Hydraulics - 2000 Hour 48 Month 1,789 13.064 Power Train And Hydraulics - 2500 Hour 48 Month 1,882 13.065 Power Train And Hydraulics - 3000 Hour 48 Month 1,982 13.066 Power Train And Hydraulics - 4000 Hour 48 Month 2,201 13.067 Power Train And Hydraulics - 5000 Hour 48 Month 2,445 13.068 Power Train And Hydraulics - 6000 Hour 48 Month 3,145 13.069 Power Train And Hydraulics - 7000 Hour 48 Month 3,767 13.070 Power Train And Hydraulics - 7500 Hour 48 Month 4,843

13.071 Power Train And Hydraulics - 1000 Hour 60 Month 2,227 13.072 Power Train And Hydraulics - 1500 Hour 60 Month 2,344 13.073 Power Train And Hydraulics - 2000 Hour 60 Month 2,467 13.074 Power Train And Hydraulics - 2500 Hour 60 Month 2,597 13.075 Power Train And Hydraulics - 3000 Hour 60 Month 2,734 13.076 Power Train And Hydraulics - 4000 Hour 60 Month 3,037 13.077 Power Train And Hydraulics - 5000 Hour 60 Month 3,375 13.078 Power Train And Hydraulics - 6000 Hour 60 Month 4,273 13.079 Power Train And Hydraulics - 7000 Hour 60 Month 5,161 13.080 Power Train And Hydraulics - 7500 Hour 60 Month 5,771 13.081 Power Train - 1000 Hour 24 Month 290 13.082 Power Train - 1500 Hour 24 Month 306 13.083 Power Train - 2000 Hour 24 Month 322 13.084 Power Train - 2500 Hour 24 Month 339 13.085 Power Train - 3000 Hour 24 Month 356 13.086 Power Train - 4000 Hour 24 Month 396 13.087 Power Train - 5000 Hour 24 Month 439 13.088 Power Train - 6000 Hour 24 Month 559 13.089 Power Train - 7000 Hour 24 Month 661 13.090 Power Train - 7500 Hour 24 Month 921 13.091 Power Train - 1000 Hour 36 Month 330 13.092 Power Train - 1500 Hour 36 Month 346 13.093 Power Train - 2000 Hour 36 Month 364 13.094 Power Train - 2500 Hour 36 Month 385 13.095 Power Train - 3000 Hour 36 Month 405 13.096 Power Train - 4000 Hour 36 Month 449 13.097 Power Train - 5000 Hour 36 Month 499 13.098 Power Train - 6000 Hour 36 Month 664 13.099 Power Train - 7000 Hour 36 Month 856 13.100 Power Train - 7500 Hour 36 Month 1,184 13.101 Power Train - 1000 Hour 48 Month 532 13.102 Power Train - 1500 Hour 48 Month 559 13.103 Power Train - 2000 Hour 48 Month 589 13.104 Power Train - 2500 Hour 48 Month 620 13.105 Power Train - 3000 Hour 48 Month 653 13.106 Power Train - 4000 Hour 48 Month 724 13.107 Power Train - 5000 Hour 48 Month 806 13.108 Power Train - 6000 Hour 48 Month 1,036 13.109 Power Train - 7000 Hour 48 Month 1,241 13.110 Power Train - 7500 Hour 48 Month 1,543 13.111 Power Train - 1000 Hour 60 Month 734 13.112 Power Train - 1500 Hour 60 Month 772 13.113 Power Train - 2000 Hour 60 Month 812 13.114 Power Train - 2500 Hour 60 Month 855 13.115 Power Train - 3000 Hour 60 Month 900 13.116 Power Train - 4000 Hour 60 Month 1,000 13.117 Power Train - 5000 Hour 60 Month 1,110

13.118 Power Train - 6000 Hour 60 Month 1,407 13.119 Power Train - 7000 Hour 60 Month 1,698 13.120 Power Train - 7500 Hour 60 Month 1,901 13.121 Engine Only - 1000 Hour 24 Month 101 13.122 Engine Only - 1500 Hour 24 Month 108 13.123 Engine Only - 2000 Hour 24 Month 112 13.124 Engine Only - 2500 Hour 24 Month 119 13.125 Engine Only - 3000 Hour 24 Month 125 13.126 Engine Only - 4000 Hour 24 Month 139 13.127 Engine Only - 5000 Hour 24 Month 154 13.128 Engine Only - 6000 Hour 24 Month 204 13.129 Engine Only - 7000 Hour 24 Month 242 13.130 Engine Only - 7500 Hour 24 Month 449 13.131 Engine Only - 1000 Hour 36 Month 116 13.132 Engine Only - 1500 Hour 36 Month 122 13.133 Engine Only - 2000 Hour 36 Month 128 13.134 Engine Only - 2500 Hour 36 Month 134 13.135 Engine Only - 3000 Hour 36 Month 142 13.136 Engine Only - 4000 Hour 36 Month 158 13.137 Engine Only - 5000 Hour 36 Month 175 13.138 Engine Only - 6000 Hour 36 Month 279 13.139 Engine Only - 7000 Hour 36 Month 330 13.140 Engine Only - 7500 Hour 36 Month 518 13.141 Engine Only - 1000 Hour 48 Month 198 13.142 Engine Only - 1500 Hour 48 Month 208 13.143 Engine Only - 2000 Hour 48 Month 219 13.144 Engine Only - 2500 Hour 48 Month 230 13.145 Engine Only - 3000 Hour 48 Month 242 13.146 Engine Only - 4000 Hour 48 Month 269 13.147 Engine Only - 5000 Hour 48 Month 300 13.148 Engine Only - 6000 Hour 48 Month 381 13.149 Engine Only - 7000 Hour 48 Month 452 13.150 Engine Only - 7500 Hour 48 Month 600 13.151 Engine Only - 1000 Hour 60 Month 258 13.152 Engine Only - 1500 Hour 60 Month 270 13.153 Engine Only - 2000 Hour 60 Month 285 13.154 Engine Only - 2500 Hour 60 Month 300 13.155 Engine Only - 3000 Hour 60 Month 315 13.156 Engine Only - 4000 Hour 60 Month 351 13.157 Engine Only - 5000 Hour 60 Month 389 13.158 Engine Only - 6000 Hour 60 Month 523 13.159 Engine Only - 7000 Hour 60 Month 619 13.160 Engine Only - 7500 Hour 60 Month 692 14.0 HOURLY SHOP RATE 112 (Installation services may be requested on an "as needed" basis)