A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds valves. Stainless Steel (316L,316,304,304L), Carbon Steel, Monel, Inconel Catalogue No.:- PMT-MNV Visit Us Online at www.pmtvalvesfittings.com
Table of Contents Introduction & Manifold Valves Features 3 Design & Materials of Construction 4 Manifold Selection Information Testing How to Order 2 Valve Manifold-Pipe to Pipe 2-VM-P-8-SS-R 2 Valve Manifold-Pipe to Flange 2-VM-P-8-SS-T 7 2 Valve Manifold-Flange to Flange 2-VM-P-8-SS-H 8 2 Valve Manifold Remote Mount 2-VM-P-8-SS-RM 9 2 Valve Manifold Direct Mount 2-VM-P-8-SS-DM 10 3 Valve Manifold-Pipe to Pipe 3-VM-P-8-SS-R 11 3 Valve Manifold-Pipe to Flange 3-VM-P-8-SS-T 12 3 Valve Manifold-Flange to Flange 3-VM-P-8-SS-H 13 3 Valve Manifold Direct Mount 3-VM-P-8-SS-DM 14 5 Valve Manifold-Pipe to Pipe 5-VM-P-8-SS-R 15 5 Valve Manifold-Pipe to Flange 5-VM-P-8-SS-T 16 5 Valve Manifold-Flange to Flange 5-VM-P-8-SS-H 17 5 Valve Manifold Direct Mount 5-VM-P-8-SS-DM 18 PMT Other product information 19 5 5 5 6
Introduction: PMT range of Valve Manifolds offer a safe and economical method of installation to control and measure pressure of liquids and gaseous media. They are ruggedly manufactured and precision machined to the most exacting dimensional tolerance to ensure perfect installation and application. PMT Valve Manifolds are functionally installed to control, measure, isolate, equalize, calibrate, drain, vent or differentiate the pressure of liquids and gases. Designed to reduce installation costs and improve safety performance, the consolidation of valves into one unit provides you with a combination of instrument isolation together with bleed/vent and test facilities. Continuous product development may from time to time necessitate changes in the details contained in this catalogue. PMT Hannifin reserve the right to make such changes at their discretion and without prior notification. Manifolds : 2, 3, 5 valve construction: 2- Valve Manifolds are used in pressure instruments such as pressure gauges, pressure transmitters, pressure switches, etc. 3-Valve And 5- Valve Manifolds are used in differential pressure instruments such as differential pressure transmitters, differential pressure switches, differential pressure gauges, etc. 3-Valve Manifolds are the most commonly used Manifolds. They could be provided with test ports on the process side and drain ports on the instrument side for drawing of the process and instrument lines respectively. 5-Valve Manifolds are normally used with differential pressure instruments where drain valves are required on the instrument side. They are also used for flushing of the system and for the prevention of loss of expensive fluid in the impulses. Options for Mounting: Remote mounting R Type Manifold (Pipe to Pipe) Direct Mounting T Type Manifold (Pipe to flange, Flange to Pipe) Direct Mounting H Type Manifold (Pipe to flange, Flange to Pipe) Manifold Specifications & Features PMT offers a variety of 2-, 3-, and 5-valve instrument manifolds. The 2-valve manifolds are designed for static pressure and liquid level applications, the 3 and 5valve manifolds are designed for differential pressure applications. These manifolds are available in traditional and compact body designs. Manifold connections include female PMT tube fittings, pipe ends (NPT and ISO 228/1), and flanges (MSS SP-99) in 1/2 and 3/4 in. and 12 mm sizes. PMT Manifolds valve have been designed to provide the safest possible connection and mounting of instruments. Standard features include: 316/316L stainless steel construction for superior corrosion resistance. One-piece construction body provides strength. 316 stainless steel pin prevents detachment of the bonnet from the body due to vibration. Burr-free threads and internal surfaces reduce leaks, promoting accurate transmitter readings. Compact design requires minimum space for operation and installation. Bonnet to body seals are metal to metal, No O-rings used. Mounting holes provided for self-supporting application. All valves 100% factory tested Dust cap prevents ingress of contaminants Standard seat diameter - 5mm Cv Maximum standard pressure up to 6000 psig @ 100 F (414 barg @ 38 C) 3
Design & Materials of Construction: 10 GRUB SCREW: For locking the handle. HANDLE: Removable T-bar handle aids low torque operation. 9 11 DUST CAP: Prevents contamination and lubricant washout of bonnet assembly. SPINDLE: Designed for low torque operating with high quality micro mirror stem finish for positive gland sealing. GLAND RETAINER: Standard Construction For maximum pressure ratting. 4 3 8 7 LOCK NUT: A secure anti vibration locking mechanism to prevent inadvertent gland adjuster loosening. WASHER PACKING: Annealed sealing washer to ensure complete atmospheric leakage and allowing on site retro-fit of bonnet with 100% re-sealing assurance. GLAND BODY: For maximum packing stability and performance. 2 6 PACKING: PTFE stem packing seals the system fluid to atmosphere. BODY: Forged one piece body construction (no welding) for high strength. 1 13 5 LOCK PIN: Safety bonnet lock pin prevents accidental disassembly. WASHER (OPTIONAL):Metal to metal seal with body suitable for high pressure temperature applications. Specification Stainless steel construction Stem packing :PTFE Maximum standard pressure up to 6,000 psig (414 barg) PTFE standard gland packing (Graphoil optional) Maximum temperature PTFE 260C (500F) Maximum temperature Graphoil 538C (1000F) ITEM NO. PART NAME MATERIALS QTY. 1 BODY A479-316L/A-105 1 2 GLAND BODY A479-316L/A-105 1 3 GLAND RETAINER A479-316L/A-105 1 4 SPINDLE A276-316 1 5 WASHER (OPTIONAL) A479-316L/A-105 1 6 PACKING PTFE/GRAPHOIL 3 7 PACKING WASHER A276-316L/A-105 1 8 LOCK NUT A479-316L/A-105 1 9 HANDLE A276-304/A-105 1 10 GRUB SCREW STEEL 1 11 DUST CAP PLASTIC LD 1 12 VEE TIP A564-630 1 13 LOCK PIN A479-316L/A-105 1 14 VENT PLUG A479-316L/A-105 1 12 VEE TIP: Self centering, non-rotatinal VEE tip gives successive positive bubble tight shut off assuring the user of leakage free performance and downstream functional safety. PRESSURE TEMPERATURE CHART PTFE PACKING Maximum pressure 10000 psi (690 bar) at 100 F (38 C) Maximum pressure 6000 psi (413 bar) at 212 F (100 C) Maximum pressure 4000 psi (275 bar) at 392 F (200 C) (PTFE packing rated to maximum temperature of 392 F (200 C)) GRAFOIL PACKING Maximum pressure 10000 psi (690 bar) at 100 F (38 C) Maximum pressure 6000 psi (413 bar) at 212 F (100 C) Maximum pressure 3300 psi (230 bar) at 842 F (450 C) PCTFE Soft Tip Maximum pressure 6000 psi (413 bar) at 212 F (100 C) Maximum pressure 5500 psi (380 bar) at 248 F (120 C) Duplex / Super Duplex Limited to 600 F (315 C) 4
Manifold Selection Information: The pressure-temperature ratings are taken for ANSI B16.34 for standard class valves and are based on class 2500. Ratings for needle tip s design is based on specific seat materials. Testing: Every valve is 100% factory tested with air and nitrogen at 1000psi(69bar) for shut off and at all seals. Each test is performed to a maximum allowable leak rate of 0.1scc/min.Other tests like Vibration, Temperature, Helium are available upon request. Cleaning & Packaging: All components are ultrasonically cleaned prior to assembly & testing. Note: Different End connections and Material grades offered on request. Ordering Multiple Options and Accessories: Manifolds vlaves are available with a wide variety of options and accessories that enable valve configurations customized to meet specific requirements. Please select or add designators from the ordering combinations as shown below: How To Order Standard items in bold. Typical Ordering Part Number Typical Ordering Part Number 2 - VM - P - 8 - SS - R - HP No. of valves 2 = 2 Valves 3 = 3 Valves 5 = 5 Valves Valve manifold Packing P = PTFE G = GRAFOIL Inlet size (Process Connection) 4 = ¼ NPT 8 = ½ NPT Materials SS = 316/316L CS = Carbon steel M = MONEL Options of mounting R = Pipe to Pipe T = Pipe to Flange H = Flange to Flange RM = Remote Mount DM = Direct Mount Options HP = 10,000 PSI Rated AT = Anti Tamper Isolate SG = Sour Gas Service Conforms to NACE MR 01-75 PB = Panel nut on bonnets Note: Please consult the factory for information on special connections. o-rings, operating pressures, special material grades, temperature ratings & custom design. 5
2V PIPE TO PIPE 2-VM-P-8-SS-R PMT 2 valve manifolds Pipe to pipe valves are designed in such a manner, which helps in connecting system impulse line & transmitters. Our range of manifold consist two valve configuration which allows for easy isolation, calibration, block and bleed for gauges, pressure switches and static pressure transmitting instruments. Withstand high pressures and temperatures. For a Higher Temperatures Grafoil Packing is used. Reduces number of fittings and space required for installation. 28 (62 MAX. OPEN) BLEED VALVE 1/4" NPT (F) 2 NOS. Ø6 MTG. HOLE 20 1/2" NPT (F) 2 NOS. 15 32 28 INSTRUMENT SIDE 21 64 PROCESS SIDE 6
2V PIPE TO FLANGE PMT 2 valve manifolds Pipe to Flange valves are designed in such a manner, which helps in connecting system impulse line & transmitters. Our range of manifold consist two valve configuration which allows for easy isolation, calibration, block and bleed for gauges, pressure switches and static pressure transmitting instruments. 2-VM-P-8-SS-T Withstand high pressures and temperatures. For a Higher Temperatures Graphoil Packing is used. Reduces number of fittings and space required for installation. PROCESS SIDE 30 83 (MAX. OPEN) 16 45 BLEED PORT 1/4"NPT / 1/2" NPT(F) 41.3 60 INSTRUMENT SIDE 30 88 2 NOS Ø12.50 MOUNTING HOLE 83 (MAX.OPEN) BLEED VALVE 113 (MAX. OPEN) 7
2V FLANGE TO FLANGE 60 41.3 PMT 2 valve manifolds Pipe to pipe valves are designed in such a manner, which helps in connecting system impulse line & transmitters. Our range of manifold consist two valve configuration which allows for easy isolation, calibration, block and bleed for gauges, pressure switches and static pressure transmitting instruments. 2 NOS Ø12.5 MOUNTING HOLE 2-VM-P-8-SS-H Withstand high pressures and temperatures. For a Higher Temperatures Grafoil Packing is used. Reduces number of fittings and space required for installation. 16 PROCESS SIDE 45 95 BLEED PORT 1/4"NPT / 1/2" NPT(F) 85 (MAX. OPEN) INSTRUMENT SIDE 85 (MAX. OPEN) BLEED VALVE 30 110 (MAX. OPEN) 8
2V REMOTE MOUNT PMT 2 valve manifolds Pipe to pipe valves are designed in such a manner, which helps in connecting system impulse line & transmitters. Our range of manifold consist two valve configuration which allows for easy isolation, calibration, block and bleed for gauges, pressure switches and static pressure transmitting instruments. 2-VM-P-8-SS-RM Withstand high pressures and temperatures. For a Higher Temperatures Grafoil Packing is used. Reduces number of fittings and space required for installation. Packing below stem threads prevents stem lubrication washout and isolate threadsfrom system fluids. 1/2" NPT (F) 32 SQ. 90 (MAX. OPEN) 1/4" NPT (F) 75 60 30 28 2 NOS Ø6 MOUNTING HOLE 1/2" NPT (M) 41 120 9
2V DIRECT MOUNT 2-VM-P-8-SS-DM PMT 2 valve manifolds Pipe to pipe valves are designed in such a manner, which helps in connecting system impulse line & transmitters. Our range of manifold consist two valve configuration which allows for easy isolation, calibration, block and bleed for gauges, pressure switches and static pressure transmitting instruments. Withstand high pressures and temperatures. For a Higher Temperatures Graphoil Packing is used. Reduces number of fittings and space required for installation. 2 NOS Ø12 MTG. HOLE 41.3 63.5 114 1/2 NPT (F) 63.5 29 115 (MAX. OPEN) 1/4" NPT(F) VENT M10X1.5 P MTG. HOLE 8.3 M6X1.0 P 24 MTG. HOLE 10
3V PIPE TO PIPE 3-VM-P-8-SS-R PMT 3 Valve Manifold, Remote Mounting Type. Two Isolation Valves & One Equalizer Valve Threaded on both Instrument, Process Side 1/2 NPT(F). Two mounting Holes are provided for 1/4 bolts used with DP Gauges, Pressure Transmitters & Pressure Switches. Stem threads rolled and hard plated provides maximum service life. For a Higher Temperatures Graphoil Packing is used. Hard seat designed to reduce packing friction giving very low torque operation. Packing below stem threads prevents stem lubrication washout and isolate threads from system fluids. 232 (MAX. OPEN) EQUALIZER VALVE 81 (MAX. OPEN) INSTRUMENT SIDE 1/2" NPT 4 NOS. 4 NOS. Ø8 MTG. HOLE 70 32 90 PROCESS SIDE 11
3V PIPE TO FLANGE 3-VM-P-8-SS-T PMT 3 Valve Manifold, Direct Mounting Type. Two Isolation Valves & One Equalizer Valve Threaded on Instrument Side 1/2 NPT(F) & Flanged on Process Side. Can be mounted directly on DP Gauges, Pressure Transmitter & Pressure Switches having mm C/C connection with centre bolting, supplied with four 7/16 Bolts & two PTFE Seals. Stem threads rolled and hard plated provides maximum service life. For a Higher Temperatures Graphoil Packing is used. Hard seat designed to reduce packing friction giving very low torque operation. 225 (MAX. OPEN) PROCESS SIDE 70 1/4" NPT VENT 2 NOS. 60 INSTRUMENT SIDE 4 NOS. Ø12.5 MTG. HOLE EQUALIZER VALVE 82 (MAX. OPEN) 88 12
3V FLANGE TO FLANGE 3-VM-P-8-SS-H PMT 3 Way Manifolds Valves, pipe to flange, designed for connecting system impulse lines & transmitters. These manifolds consist of 1/2" NPT(F), pipe to flange or flange to flange connections on mm (2-1/8") centers, and of one equalizer valve, 2 block valves and 2 nos 1/4" NPT(F) purge (VENT) connections. 1/4 NPT (F) Purge connections (2) optional. Stem threads rolled and hard plated provides maximum service life. For a Higher Temperatures Graphoil Packing is used. Stem threads rolled and hard plated provides maximum service life. PROCESS SIDE 88 95 1/4" NPT VENT 2 NOS. 60 INSTRUMENT SIDE EQUALIZER VALVE 4 NOS. Ø12.5 MTG. HOLE 85 (MAX. OPEN) 225 (MAX. OPEN) 13
3V DIRECT MOUNT PMT 3 Valve Manifold, Direct Mounting Type. Two Isolation Valves & One Equalizer Valve Threaded on Process Side & Flanged on Instrument Side. Can be mounted directly on DP Gauges, Pressure Transmitter & Pressure Switches having mm C/C connection with centre bolting, supplied with four 7/16 Bolts & two PTFE Seals. It can also be mounted with Oval flange to connect the process line with 1/2 pipe or tube connections. 3-VM-P-8-SS-DM Stem threads rolled and hard plated provides maximum service life. For a Higher Temperatures Graphoil Packing is used. Stem threads rolled and hard plated provides maximum service life. 4 NOS. Ø12 MTG. HOLE FLANGE INSTRUMENT 1/4" NPT VENT 32 62 1/2" NPT PROCESS 34 22 2NOS. MTG. 3/8" UNF TAPPED 116 14
5V PIPE TO PIPE 5-VM-P-8-SS-R PMT 5 Valve Manifold, Remote Mounting Type. Two Isolation Valves, One Equalizer Valve & Two Drain Valves. Threaded on all Instrument, Process & Drain Side 1/2 NPT(F). Two mounting holes are provided for 1/4 bolts used with DP Gauges, Pressure Transmitters & Pressure Switches. One Piece Bar stock Forged Body for high strangh and fully safety. Two Part Stem tip, stellited and hardened provides excellent flow control and ensures buble-tight shutt off. Packing material PTFE / Graphoil. Packing below stem threads prevents stem lubrication washout and isolate threads from system fluids. PROCESS SIDE 90 32 90 INSTRUMENT SIDE BLEED VALVE EQUALIZER & BLEED VALVE 84 (MAX. OPEN) 1/2" NPT (F) 4 NOS. 225 (MAX. OPEN) 1/4" NPT (F) VENT 15
5V PIPE TO FLANGE 32 PMT 5 Valve Manifold, Direct Mounting Type. Two Isolation Valves, One Equalizer Valve & Two Drain Valves Threaded on Instrument Side (1/2 NPT(F), Flanged on Process Side & Threaded on Drain Side (1/4 NPT(F). Can be mounted directly on DP Gauges, Pressure Transmitter & Pressure Switches having mm C/C connection with centre bolting, supplied with four 7/16 Bolts & two PTFE Seals. One Piece Bar stock Forged Body for high strangh and fully safety. Two Part Stem tip, stellited and hardened provides excellent flow control and ensures buble-tight shutt off. Packing material PTFE / Graphoil. 1/2" NPT (F) VENT 2 NOS. 5-VM-P-8-SS-T 1/4" NPT (F) VENT PROCESS SIDE BLEED VALVE EQUALIZER VALVE 90 INSTRUMENT SIDE 60 90 84 (MAX. OPEN) EQUALIZER & BLEED VALVE EQUALIZER & BLEED VALVE 4 NOS. Ø12.5 MTG. HOLE 225 (MAX. OPEN) 16
5V FLANGE TO FLANGE 5-VM-P-8-SS-H PMT 5 Valve Manifold, Direct Mounting Type. Two Isolation Valves, One Equalizer Valve & Two Drain Valves Threaded on Instrument Side (1/2 NPT(F), Flanged on Process Side & Threaded on Drain Side (1/4 NPT). Can be mounted directly on DP Gauges, Pressure Transmitter & Pressure Switches having mm C/C connection with centre bolting, supplied with four 7/16 Bolts & two PTFE Seals. One Piece Bar stock Forged Body for high strangh and fully safety. Two Part Stem tip, stellited and hardened provides excellent flow control and ensures buble-tight shutt off. Packing material PTFE / Graphoil. PROCESS SIDE 1/4" NPT (F) VENT 32 EQUALIZER VALVE BLEED VALVE 110 60 INSTRUMENT SIDE 90 EQUALIZER & BLEED VALVE 83 (MAX. OPEN) 225 (MAX. OPEN) 4 NOS. Ø12.5 MTG. HOLE 17
5V DIRECT MOUNT 5-VM-P-8-SS-DM PMT 5 Valve Manifold, Direct Mounting Type. Two Isolation Valves, One Equalizer Valve & Two Drain Valves. Threaded on Instrument Side, Flanged on Process Side & Bleeder Plug on Drain Side. Can be mounted directly on DP Gauges, Pressure Transmitter & Pressure Switches having mm C/C connection with centre bolting, supplied with four 7/16 Bolts & two PTFE Seals. One Piece Bar stock Forged Body for high strangh and fully safety. Two Part Stem tip, stellited and hardened provides excellent flow control and ensures buble-tight shutt off. Packing material PTFE / Graphoil. 4 NOS. Ø12 MTG HOLE 1/4" NPT PROCESS 3/8" -16UNC X 14.5 DEEP MTG. HOLES 2 NOS. 34 41 8 85 133.5 1/4" -18 NPT- STATIC PORT 2NOS. 18
Tube Fittings PMT Tube Fittings are fully interchangeable with Swagelok and Parker A-Lok Other PMT Product Families Pipe Fittings PMT Pipe Fittings are fully interchangeable with Swagelok and Parker A-Lok Sizes: Fractional: 1/16-2 Sizes: Fractional: 1/16-1 Materials: Stainless Steel (316L,316,304,304L), Materials: Stainless Steel (316L,316,304,304L), Brass, Carbon Steel, Monel,Inconel Brass, Carbon Steel, Monel, Inconel Pressure Ratings: 6000 PSI Pressure Ratings: 6000 PSI,15000 PSI Needle valves Types: Straight, Angle, Block and Bleed types. Pressure Ratings: 6000 PSI,10000 PSI,15000 PSI Sizes: 1/8-1 Materials: Stainless Steel(316L,316,304,304L), Brass, Carbon Steel, Monel, Hastelloy, Inconel Pattern: Square Body, Hex Body Manifold Valve Pressure Ratings: 6000 PSI,10000 PSI Pattern : R Type- Remote types (Pipe to Pipe), T Type- (Pipe to Flange) H Type- (Flange to Flange) Types : 2Way, 3 Way, 5 Way, Materials: Stainless Steel(316L,316,304,304L), Brass, Carbon Steel, Monel, Hastelloy, Inconel Instrument Ball Valve Pressure Ratings: 3000 PSI,6000 PSI Sizes: 1/4-1 Materials: Stainless Steel (316L,316,304,304L), Steel, Brass, Carbon Steel, Monel, Hastelloy, Incone Types: 2 Way, 3 Way, 5 Way, Pattern: Round Body, Square Body, Hex Body Mono Flange Valve Pressure Ratings: 150#,300#,600#,900#,1500# Types: Process Monoflange, Instrument Monoflange Pattern: Flangend RF/RTJ Sizes: 1/2-2 Materials: Stainless Stee l(316l,316,304,304l), Steel Brass, Carbon Steel, Monel, Hastelloy, Inconel Instrument Accessories Airheader, Thermowell, Syphon, Syphon, Tube Clamps Condensate pot, Orifice Plate Assembly, Instrument Enclosure, Forged Steel valves Valve Types: Gate, Globe, Check, Ball, Needle, Sizes: 1/2-2 Materials: A105,F304,F316,F11,F22 Pressure Ratings:800#, 1500#,2500# Industrial Valves Cast Steel Valves Valve Types: Gate, Globe, Check, Ball, Butterfly Sizes: 2-12 Materials: WCB,LCB,CF8,CF8M,ALLOY Pressure Ratings:150#,300#,600# 19
Mfg & Exp. : Valves & Fittings C-6, Shreeji Industrial Estate, Nr. Telephone Exchange, N. H. No.-8, NARODA, Ahmedabad-382 330, Gujarat, India. Tele.\ Fax : (0) +91 079 22823117 Mobile : 091-9825097602/9712997602 E-mail :, info@pmtengineers.com www.pmtvalvesfittings.com A Trusted Name in Valves and Fittings