Features : 3 years warranty PB PB PB V 28.8V 57.6V 13.8V 86% 87% 89%

Similar documents
600W Intelligent Single Output Battery Charger 21A 10.5A VOLTAGE RANGE FREQUENCY RANGE

PB-600 SERIES 600 Watt Battery Charger Power Supply Measures: 9.06 x 6.22 x 2.64

1000W Intelligent Single Output Battery Charger PB PB PB V 28.8V 57.6V 13.8V 85% 88% 89%

1000W Intelligent Single Output Battery Charger 27.6V 55.2V OUTPUT CURRENT 16 ~ 18V 32 ~ 35V 64.5 ~ 69.5V OVER VOLTAGE PROTECTION

PB-600 series. Jameco SKU Number: W Single Output Battery Charger SPECIFICATION MODEL


D R C- 4 0 s e r i e s

UHP-500 series. 500W Slim Type with PFC Switching Supply

350W Slim Type with PFC Switching Power Supply

PB-600 Instruction Manual

UHP-350 series. 350W Slim Type with PFC Switching Power Supply

UHP-200 series. 200W Slim Type with PFC Switching Power Supply. File Name:UHP-200-SPEC GB4943 EN EN UL IEC

60W Single Output LED Power Supply. HBG-60 series. File Name:HBG-60-SPEC

SELV IP30 (CCC optional)

IS 15885(Part 2/Sec13) R ( for 24V only)

LPF-25 series. 25W Constant Voltage + Constant Current LED Driver

60W Constant Current Mode LED Driver. HBG-60 series. File Name:HBG-60-SPEC

Advanced Battery Charger. 3 - stage charging capability (IUOU) 4.1 A / 100VAC 1.8A / 240VAC

Advanced Battery Charger. 3 - stage charging capability (IUoU) 25A

Advanced Battery Charger 0 ~ 15A 0 ~ 25A 0 ~ 35A 0 ~ 50A 0 ~ 80A. 3 - stage charging capability (IUOU) 90 ~ 264VAC (refer to de-rating curve)

DIN Rail Power Supplies

CX-SERIES ADVANCED BATTERY CHARGER

BP- A Series Switch-Mode 3 Stage Battery Charger User s Manual

UCS-CHR24V55W. Combined Power Supply & Battery Charger. Data Sheet

CX Series User s Manual

TRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series

Jameco SKU Number:

KNX-20E. 640mA KNX Power Supply. Isolation classⅠ. Installed on DIN rail TS-35/7.5 or 15. File Name:KNX-20E-SPEC Sicherheit ID

Video & Power Over Coax Kit

MD60 Series 60W DINergy Power Supply

PB -300 / 360 Instruction Manual

+V -V D1 - D2 L N + - M6/8 M10/10 PE L N 13/02/2019 ALIMENTATION 48V 300W-SJN-V8. Code W. Al Jour/Nuit. Alarme. Al Jour. Relais. Relais.

PRO POWER 2 0 A L I T H I U M B AT T E RY C H A R G E R M O D E L : P P - L B C V E R S I O N : V 1. 0

LDX-C120 Series is a 120 W integrated DIN Rail Battery Charger / DC UPS Power Supplies, suitable for wide variety of industrial applications.

UNA SERIES Embedded Power Supply Features Model naming method UNA 350P / Applications UNA Conformity to RoHS Directive Product Line-up

Models. Output current max.* Output Power max. Low Line : VAC High Line: VAC 24 VDC / 12 A 240 W. Back up battery

Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]

EMERGENCY VEHICLE BATTERY MANAGER PS2024

Specification of Battery Charger

PRODUCT SPECIFICATION OUTPUT CURRENT (A) OUTPUT CURRENT TOLERANCE ±7% ±7% ±10% ±10% ±7% 1.8. Units % % % Typ. Typ.

40A DC UPS Module SPECIFICATION MODEL DC INPUT / DC BUS DR-UPS40 24 ~ 29V 40A 21 ~ 29V 0 ~ 40A 2A 4 / 7 / 12AH / 24V

Programmable Smart Charger

Battery chargers. Technical addendum.

Test Report: UHP

Industrial Chargers and

Switching Power Supplies

Constant Voltage TRIAC Dimmable Driver---120W Series. Features

Features. Description. Table of Contents

Specification of Battery Charger

Industrial Power Supplies

RCD15W Series PART NUMBER STRUCTURE

RWS50B RWS100B RWS150B RWS300B RWS600B

SPECIFICATIONS SRF SuperchargerPlus

DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES

PDL03-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE

PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE

KNX-20E mA KNX Power Supply. Isolation classⅠ. Installed on DIN rail TS-35/7.5 or 15 KNX-20E_ EH-0817

HAE S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly Option Voltage Quantity Voltage Range Pin Options

MODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models

POWER-WIN TECHNOLOGY CORP.

Sail Away with Peace of Mind. Dolphin Series II Smart Battery Chargers

RDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage Quantity Voltage Range temperature PART NUMBER STRUCTURE

Ordering Information. Switching Power Supply S82F. Industrial-Grade Power Supply for General or Peak Load Applications SWITCHING POWER SUPPLIES

SDS05-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE

HAE S 05 W - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.

720 W / 24 V On-board Battery Charger. for industrial applications. Product Data Sheet

PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1

DC (on) LED Signal. Multiple output connector for easy wiring

DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power

Notes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]

LDX-U20 is a microprocessor controlled DC-UPS rated 20 A usable in 12 V or 24 V systems.

DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power

DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES

AC/DC Converter MBP250-2A13D13M

DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power

DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power

Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]

HAE S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option Voltage Quantity Voltage Pin Options

TDK-Lambda ZWS240BP/A SPECIFICATIONS

Sorensen XG 1700 Series 1700 W A Watt, 1U Programmable DC Power Supplies V. Key Features. Key Modes

HAE S 05 - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.

Specification of Soneil Battery Charger

DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power

MODEL POWER BATTERY VOLTAGE COMMUNICATION. LBC SxxxG* 8000 W 110 V CAN or Ethernet. LBC SxxxG* W 110 V CAN or Ethernet

Load Resistive load (p.f. = 1) Inductive load (p.f. = 0.40, L/R = 7 ms) Rated load 5 A at 250 VAC, 30 VDC 2 A at 250 VAC, 30 VDC

PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1

Silvertel. Ag Features. Multi-Stage Charging. Battery Reversal Protection. Reduced Power Consumption. Wide DC or AC Input Voltage Range

Sail Away with Peace of Mind. Dolphin Series II Smart Battery Chargers

POWER SUPPLIES. Control Transformers p8-1 Modular Power Supplies p8-2 Switching Power Supplies p8-3 Automatic Battery Chargers p PAGE

Specifications 2019-V AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W

Document: PRODSPEC-140 Revision: G DCN No Date: October 1, 2014 Product: 10-amp EnerGenius NRG Battery Charger

- 1 - Tel.: Fax: Battery charging units BLG2024 and BLG3524

Efficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.

POWER+ CLASSIC 20/30 KVA, 3X208 VAC WITH INTERNAL BATTERIES. GAMATRONIC, A SolarEdge Division

POWER+ CLASSIC 20/30 KVA, 3X208 VAC WITH INTERNAL BATTERIES. GAMATRONIC, A SolarEdge Division

PRODUCTS: POWER SUPPLY

ECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating

Sorensen XG Series / XTR Series W A. 850 W, 1U Half Rack Programmable DC Power Supplies V

LBC S102G 8000 W Ethernet CAN bus on request. LBC S101G W CAN bus Ethernet on request

Specification of Soneil Battery Charger MODEL: 5807SR 60V5A BATTERY CHARGER

Transcription:

600W Single Output Charger PB600 series SPECIFICATION MODEL OUTPUT INPUT PROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 2) OTHERS NOTE BOOST CHARGE VOLTAGE FLOAT CHARGE VOLTAGE RECOMMENDED BATTERY 135 ~ 400AH CAPACITY(AMP HOURS)(Note 3) BATTERY TYPE OUTPUT CURRENT VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION Features : 2/3/8 stage charging (Note 4) Universal AC input / Full range Builtin active PFC function PF>0.95 Protection: Reverse polarity / Short circuit / Over voltage / Over temperature Charger for leadacid batteries 3 color LED loading indicator Builtin remote ONOFF control Builtin temperature compensation function Builtin fan speed control (depends on charging current) 3 years warranty PB60012 PB60024 PB60048 14.4V 28.8V 57.6V 13.8V Open & Sealed Lead Acid 40A 90 ~ 264VAC 127 ~ 370VDC 47 ~ 63Hz POWER FACTOR (Typ.) 0.95/230VAC 0.98/115VAC at full load REMOTE CONTROL LEAKAGE CURRENT FROM BATTERY (Typ.) 1mA FAST CHARGE CHARGER OK OUTPUT OK TEMPERATURE SENSE EMC IMMUNITY 27.6V 55.2V 70 ~ 2AH 35 ~ 5AH 21A.5A 86% 87% 89% 6.8A/115VAC 25A/115VAC <3.5mA / 240VAC 3.4A/230VAC 50A/230VAC 16 ~ 18V 32 ~ 35V 64.5 ~ 69.5V Protection type : Shut down o/p voltage, repower on to recover Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 20 ~ 60 (Refer to "Derating Curve") 20 ~ 90% RH noncondensing 40 ~ 85, ~ 95% RH ± 0.05%/ (0 ~ 50 ) ~ 500Hz, 2G min./1cycle, 60min. each along X, Y, Z axes UL12, TUV EN603351, EN60335229 (except for 48V), EN609501(48V only) approved I/PO/P:3KVAC I/PFG:2KVAC O/PFG:0.5KVAC I/PO/P, I/PFG, O/PFG:0M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 class B (CISPR22), EN60032,3 Compliance to EN60042,3,4,5,6,8,11, EN55024; light industry level, criteria A MTBF 135.6K hrs min. MILHDBK217F (25 ) DIMENSION PACKING Open: Normal work 2 / 3 / 8 stage selectable Relay contact (RY15) Relay contact (RY13) By NTC 230*158*67mm(L*W*H) 2.2Kg; 6pcs/14.2Kg/1.76CUFT Short: Stop 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. The power supply is considered a component which will be installed into a final equipment. The final equipment must be reconfirmed that it still meets EMC directives. 3. This is Mean Well's suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation. 4. Please choose the "3 stage" selection when the charger is used to charge the batteries and power the loads in the same time.

600W Single Output Charger PB600 series Mechanical Specification Case No.805C Unit:mm 230 67 7 145 42.5 ON/OFF SWITCH INLET 48 Air flow direction 24.1 Control Pin No. Assignment(CN0) : HRS DF11DP2DS or equivalent Pin No. Assignment Pin No. Assignment Mating Housing Terminal 1,2 RY13 8 NTC(5K Ω) 3,4 NC 9 RC HRS DF11DS HRS DF11**SC 5,6 7 RY15 RC or equivalent or equivalent RY13 : bank OK RY15 : Charger OK NTC / : Temperature sense RC / RC: Remote ON/OFF Curve 2 Stage 3 Stage Start V boost Start Charge Voltage Charge Voltage V boost V float 0% 0% Charge Current Constant Current % % Constant Voltage Charge Current Constant Current Constant Voltage Float stage 1 stage 2 stage 1 stage 2 stage 3

600W Single Output Charger PB600 series 8 Stage Pulse Soft Start Constant Current Constant Voltage Analysis Recond Float Maintain Charge Voltage Charge Current stage 1 stage 2 stage 3 stage 4 stage 5 stage 6 stage 7 stage 8 Block Diagram PFC : 95KHz PWM fosc : 60KHz I/P EMI FILTER ACTIVE INRUSH CURRENT LIMITING RECTIFIER & PFC POWER SWITCHING RECTIFIER & FILTER V PFC CONTROL AUX POWER PWM CONTROL FAN OTP CURRENT DETECTION MCU REVERSE DETECTION 2/8 STAGE SELECT REMOTE CONTROL RC Bank OK RY13 Charger OK RY15 Derating Curve Static Characteristics 0 80 60 40 20 0 90 80 70 60 50 40 20 0 20 30 40 50 60 70 (HORIZONTAL) AMBIENT TEMPERATURE ( ) 90 95 0 115 264 INPUT VOLTAGE (VAC) 60Hz

600W Single Output Charger PB600 series Function Description of CN0 The Function of LEDs Pin No. Function Description 1,2 RY13 Relay contact rating(max.) : 30V/1A resistive. ; "Short" when the battery is full, "Open" when the battery is still charging 5,6 RY15 Relay contact rating(max.) : 30V/1A resistive. ; "Short" when the unit is working normally; "Open" when the unit is in a faulty condition 7,8 9, Temperature sensor comes along with the charger can be connected to the unit to allow / temperature compensation of the charging voltage Turn the output on and off by electrical or dry contact between pin (RC) and pin 9(RC) RC / RC Open : Normal work, Short : Stop charging Status Color Red Steady Fail Full Flashing Function Manual 1.Remote Control The charger can be turned ON/OFF by using the "Remote Control" function. Between RC(pin) and RC(pin9) SW Open SW Short ON OFF 1 CN0 RY13 RY13 2 9 RC RC SW 2. 2,3, or 8 stage charging select (1)The charger features user selectable 2,3, or 8 stage charging. The charging profile is selected by moving the slide switch on the back panel. Switch mode 1 CN0 RY13 RY13 2 Right 2 stage charging Middle 3 stage charging 9 RC RC Left 8 stage charging (2)Please choose the "3 stage" selection when the charger is used to charge the batteries and power the loads in the same time. 3.Charger OK Relay(RY15) CN0 Charger Work normally Failure or protection function activated Between pin5 and pin6(ry15) ON (Short) OFF (Open) 1 RY13 RY13 2 9 RC RC RY15

600W Single Output Charger PB600 series 4.Output OK (RY13) 1.Bank OK (RY13) Bank Between pin1 and pin2(ry13) CN0 1 2 RY13 RY13 Full ON (Short) OFF (Open) 9 RC RC RY13 5.Temperature compensation Temperature sensor comes along with the charger can be connected to the unit to allow temperature compensation of the charging voltage. If the sensor is not used, the charger still works normally. CN0 1 RY13 RY13 2 9 RC RC NTC The temperature sensor can either be attached to the battery or placed in its surrounding environment.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Mean Well: PB60012 PB60048 PB60024